mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-11-26 07:37:31 +02:00
usb/: added DFU implementation from f386base/fw/boot/ (unported)
This commit is contained in:
Werner Almesberger
parent
0676bef2c1
commit
fb2204ad84
332
atusb/fw/usb/dfu.c
Normal file
332
atusb/fw/usb/dfu.c
Normal file
@ -0,0 +1,332 @@
|
||||
/*
|
||||
* boot/dfu.c - DFU protocol engine
|
||||
*
|
||||
* Written 2008-2010 by Werner Almesberger
|
||||
* Copyright 2008-2010 Werner Almesberger
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
/*
|
||||
* http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
|
||||
*/
|
||||
|
||||
/*
|
||||
* A few, erm, shortcuts:
|
||||
*
|
||||
* - we don't bother with the app* states since DFU is all this firmware does
|
||||
* - after DFU_DNLOAD, we just block until things are written, so we never
|
||||
* enter dfuDNLOAD_SYNC or dfuDNBUSY
|
||||
* - no dfuMANIFEST_SYNC, dfuMANIFEST, or dfuMANIFEST_WAIT_RESET
|
||||
* - to keep our buffers small, we only accept EP0-sized blocks
|
||||
*/
|
||||
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "regs.h"
|
||||
#include "uart.h"
|
||||
#include "usb.h"
|
||||
#include "dfu.h"
|
||||
|
||||
#include "config.h"
|
||||
|
||||
|
||||
#ifndef NULL
|
||||
#define NULL 0
|
||||
#endif
|
||||
|
||||
|
||||
#define PAYLOAD_END (PAYLOAD_START+PAYLOAD_SIZE)
|
||||
|
||||
|
||||
const uint8_t device_descriptor[] = {
|
||||
18, /* bLength */
|
||||
USB_DT_DEVICE, /* bDescriptorType */
|
||||
LE(0x100), /* bcdUSB */
|
||||
USB_CLASS_PER_INTERFACE,/* bDeviceClass */
|
||||
0x00, /* bDeviceSubClass (per interface) */
|
||||
0x00, /* bDeviceProtocol (per interface) */
|
||||
EP0_SIZE, /* bMaxPacketSize */
|
||||
LE(USB_VENDOR), /* idVendor */
|
||||
LE(USB_PRODUCT), /* idProduct */
|
||||
LE(0x0001), /* bcdDevice */
|
||||
0, /* iManufacturer */
|
||||
0, /* iProduct */
|
||||
0, /* iSerialNumber */
|
||||
1 /* bNumConfigurations */
|
||||
};
|
||||
|
||||
|
||||
const uint8_t config_descriptor[] = {
|
||||
9, /* bLength */
|
||||
USB_DT_CONFIG, /* bDescriptorType */
|
||||
LE(9+9), /* wTotalLength */
|
||||
1, /* bNumInterfaces */
|
||||
1, /* bConfigurationValue (> 0 !) */
|
||||
0, /* iConfiguration */
|
||||
// USB_ATTR_SELF_POWERED | USB_ATTR_BUS_POWERED,
|
||||
USB_ATTR_BUS_POWERED, /* bmAttributes */
|
||||
15, /* bMaxPower */
|
||||
|
||||
/* Interface #0 */
|
||||
|
||||
9, /* bLength */
|
||||
USB_DT_INTERFACE, /* bDescriptorType */
|
||||
0, /* bInterfaceNumber */
|
||||
0, /* bAlternateSetting */
|
||||
0, /* bNumEndpoints */
|
||||
0xfe, /* bInterfaceClass (application specific) */
|
||||
0x01, /* bInterfaceSubClass (device fw upgrade) */
|
||||
0x02, /* bInterfaceProtocol (DFU mode protocol) */
|
||||
0, /* iInterface */
|
||||
};
|
||||
|
||||
|
||||
static const uint8_t functional_descriptor[] = {
|
||||
9, /* bLength */
|
||||
DFU_DT_FUNCTIONAL, /* bDescriptorType */
|
||||
0xf, /* bmAttributes (claim omnipotence :-) */
|
||||
LE(0xffff), /* wDetachTimeOut (we're very patient) */
|
||||
LE(EP0_SIZE), /* wTransferSize */
|
||||
LE(0x101), /* bcdDFUVersion */
|
||||
};
|
||||
|
||||
|
||||
struct dfu dfu = {
|
||||
OK,
|
||||
LE(1000), 0,
|
||||
dfuIDLE,
|
||||
0,
|
||||
};
|
||||
|
||||
|
||||
static uint16_t next_block = 0;
|
||||
static uint16_t payload;
|
||||
static __bit did_download;
|
||||
|
||||
|
||||
static __xdata uint8_t buf[EP0_SIZE];
|
||||
|
||||
|
||||
static void flash_erase_page(uint16_t addr)
|
||||
{
|
||||
FLKEY = 0xa5;
|
||||
FLKEY = 0xf1;
|
||||
PSCTL |= PSEE;
|
||||
PSCTL |= PSWE;
|
||||
*(__xdata uint8_t *) addr = 0;
|
||||
PSCTL &= ~PSWE;
|
||||
PSCTL &= ~PSEE;
|
||||
}
|
||||
|
||||
|
||||
static void flash_write_byte(uint16_t addr, uint8_t value)
|
||||
{
|
||||
FLKEY = 0xa5;
|
||||
FLKEY = 0xf1;
|
||||
PSCTL |= PSWE;
|
||||
PSCTL &= ~PSEE;
|
||||
*(__xdata uint8_t *) addr = value;
|
||||
PSCTL &= ~PSWE;
|
||||
}
|
||||
|
||||
|
||||
static void block_write(void *user)
|
||||
{
|
||||
uint16_t *size = user;
|
||||
uint8_t *p;
|
||||
|
||||
for (p = buf; p != buf+*size; p++) {
|
||||
if (!(payload & 511))
|
||||
flash_erase_page(payload);
|
||||
flash_write_byte(payload, *p);
|
||||
payload++;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static __bit block_receive(uint16_t length)
|
||||
{
|
||||
static uint16_t size;
|
||||
|
||||
if (payload < PAYLOAD_START || payload+length > PAYLOAD_END) {
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errADDRESS;
|
||||
return 0;
|
||||
}
|
||||
if (length > EP0_SIZE) {
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errUNKNOWN;
|
||||
return 0;
|
||||
}
|
||||
size = length;
|
||||
usb_recv(&ep0, buf, size, block_write, &size);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
static __bit block_transmit(uint16_t length)
|
||||
{
|
||||
uint16_t left;
|
||||
|
||||
if (payload < PAYLOAD_START || payload > PAYLOAD_END) {
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errADDRESS;
|
||||
return 1;
|
||||
}
|
||||
if (length > EP0_SIZE) {
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errUNKNOWN;
|
||||
return 1;
|
||||
}
|
||||
left = PAYLOAD_END-payload;
|
||||
if (left < length) {
|
||||
length = left;
|
||||
dfu.state = dfuIDLE;
|
||||
}
|
||||
usb_send(&ep0, (__code uint8_t *) payload, length, NULL, NULL);
|
||||
payload += length;
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
static __bit my_setup(struct setup_request *setup) __reentrant
|
||||
{
|
||||
__bit ok;
|
||||
|
||||
switch (setup->bmRequestType | setup->bRequest << 8) {
|
||||
case DFU_TO_DEV(DFU_DETACH):
|
||||
debug("DFU_DETACH\n");
|
||||
/*
|
||||
* The DFU spec says thay this is sent in protocol 1 only.
|
||||
* However, dfu-util also sends it to get out of DFU mode,
|
||||
* so we just don't make a fuss and ignore it.
|
||||
*/
|
||||
return 1;
|
||||
case DFU_TO_DEV(DFU_DNLOAD):
|
||||
debug("DFU_DNLOAD\n");
|
||||
if (dfu.state == dfuIDLE) {
|
||||
next_block = setup->wValue;
|
||||
payload = PAYLOAD_START;
|
||||
}
|
||||
else if (dfu.state != dfuDNLOAD_IDLE) {
|
||||
error("bad state\n");
|
||||
return 0;
|
||||
}
|
||||
if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
|
||||
debug("retransmisson\n");
|
||||
return 1;
|
||||
}
|
||||
if (setup->wValue != next_block) {
|
||||
debug("bad block (%d vs. %d)\n",
|
||||
setup->wValue, next_block);
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errUNKNOWN;
|
||||
return 1;
|
||||
}
|
||||
if (!setup->wLength) {
|
||||
debug("DONE\n");
|
||||
dfu.state = dfuIDLE;
|
||||
did_download = 1;
|
||||
return 1;
|
||||
}
|
||||
ok = block_receive(setup->wLength);
|
||||
next_block++;
|
||||
dfu.state = dfuDNLOAD_IDLE;
|
||||
return ok;
|
||||
case DFU_FROM_DEV(DFU_UPLOAD):
|
||||
debug("DFU_UPLOAD\n");
|
||||
if (dfu.state == dfuIDLE) {
|
||||
next_block = setup->wValue;
|
||||
payload = PAYLOAD_START;
|
||||
}
|
||||
else if (dfu.state != dfuUPLOAD_IDLE)
|
||||
return 0;
|
||||
if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
|
||||
debug("retransmisson\n");
|
||||
/* @@@ try harder */
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errUNKNOWN;
|
||||
return 1;
|
||||
}
|
||||
if (setup->wValue != next_block) {
|
||||
debug("bad block (%d vs. %d)\n",
|
||||
setup->wValue, next_block);
|
||||
dfu.state = dfuERROR;
|
||||
dfu.status = errUNKNOWN;
|
||||
return 1;
|
||||
}
|
||||
ok = block_transmit(setup->wLength);
|
||||
next_block++;
|
||||
dfu.state = dfuUPLOAD_IDLE;
|
||||
return ok;
|
||||
case DFU_FROM_DEV(DFU_GETSTATUS):
|
||||
debug("DFU_GETSTATUS\n");
|
||||
usb_send(&ep0, (uint8_t *) &dfu, sizeof(dfu), NULL, NULL);
|
||||
return 1;
|
||||
case DFU_TO_DEV(DFU_CLRSTATUS):
|
||||
debug("DFU_CLRSTATUS\n");
|
||||
dfu.state = dfuIDLE;
|
||||
dfu.status = OK;
|
||||
return 1;
|
||||
case DFU_FROM_DEV(DFU_GETSTATE):
|
||||
debug("DFU_GETSTATE\n");
|
||||
usb_send(&ep0, &dfu.state, 1, NULL, NULL);
|
||||
return 1;
|
||||
case DFU_TO_DEV(DFU_ABORT):
|
||||
debug("DFU_ABORT\n");
|
||||
dfu.state = dfuIDLE;
|
||||
dfu.status = OK;
|
||||
return 1;
|
||||
default:
|
||||
#ifdef CONFIG_PRINTK
|
||||
printk("DFU rt %x, rq%x ?\n",
|
||||
setup->bmRequestType, setup->bRequest);
|
||||
#else
|
||||
/*
|
||||
* @@@ SDCC 2.7.0 ends up OR'in setup->bmRequestType with
|
||||
* setup->bRequest unshifted if we don't use at least one of
|
||||
* them here.
|
||||
*/
|
||||
{
|
||||
static volatile uint8_t foo;
|
||||
foo = setup->bRequest;
|
||||
}
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static __bit my_descr(uint8_t type, uint8_t index, const uint8_t **reply,
|
||||
uint8_t *size) __reentrant
|
||||
{
|
||||
index; /* suppress warning */
|
||||
if (type != DFU_DT_FUNCTIONAL)
|
||||
return 0;
|
||||
*reply = functional_descriptor;
|
||||
*size = sizeof(functional_descriptor);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
static void my_reset(void) __reentrant
|
||||
{
|
||||
/* @@@ not nice -- think about where this should go */
|
||||
extern void run_payload(void);
|
||||
|
||||
if (did_download)
|
||||
run_payload();
|
||||
}
|
||||
|
||||
|
||||
void dfu_init(void)
|
||||
{
|
||||
user_setup = my_setup;
|
||||
user_get_descriptor = my_descr;
|
||||
user_reset = my_reset;
|
||||
}
|
||||
86
atusb/fw/usb/dfu.h
Normal file
86
atusb/fw/usb/dfu.h
Normal file
@ -0,0 +1,86 @@
|
||||
/*
|
||||
* boot/dfu.h - DFU protocol constants and data structures
|
||||
*
|
||||
* Written 2008 by Werner Almesberger
|
||||
* Copyright 2008 Werner Almesberger
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef DFU_H
|
||||
#define DFU_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
|
||||
enum dfu_request {
|
||||
DFU_DETACH,
|
||||
DFU_DNLOAD,
|
||||
DFU_UPLOAD,
|
||||
DFU_GETSTATUS,
|
||||
DFU_CLRSTATUS,
|
||||
DFU_GETSTATE,
|
||||
DFU_ABORT,
|
||||
};
|
||||
|
||||
|
||||
enum dfu_status {
|
||||
OK,
|
||||
errTARGET,
|
||||
errFILE,
|
||||
errWRITE,
|
||||
errERASE,
|
||||
errCHECK_ERASED,
|
||||
errPROG,
|
||||
errVERIFY,
|
||||
errADDRESS,
|
||||
errNOTDONE,
|
||||
errFIRMWARE,
|
||||
errVENDOR,
|
||||
errUSBR,
|
||||
errPOR,
|
||||
errUNKNOWN,
|
||||
errSTALLEDPKT,
|
||||
};
|
||||
|
||||
|
||||
enum dfu_state {
|
||||
appIDLE,
|
||||
appDETACH,
|
||||
dfuIDLE,
|
||||
dfuDNLOAD_SYNC,
|
||||
dfuDNBUSY,
|
||||
dfuDNLOAD_IDLE,
|
||||
dfuMANIFEST_SYNC,
|
||||
dfuMANIFEST,
|
||||
dfuMANIFEST_WAIT_RESET,
|
||||
dfuUPLOAD_IDLE,
|
||||
dfuERROR
|
||||
};
|
||||
|
||||
|
||||
#define DFU_DT_FUNCTIONAL 0x21 /* DFU FUNCTIONAL descriptor type */
|
||||
|
||||
|
||||
#define DFU_TO_DEV(req) (0x21 | (req) << 8)
|
||||
#define DFU_FROM_DEV(req) (0xa1 | (req) << 8)
|
||||
|
||||
|
||||
struct dfu {
|
||||
uint8_t status; /* bStatus */
|
||||
uint8_t toL, toM, toH; /* bwPollTimeout */
|
||||
uint8_t state; /* bState */
|
||||
uint8_t iString;
|
||||
};
|
||||
|
||||
|
||||
extern struct dfu dfu;
|
||||
|
||||
|
||||
void dfu_init(void);
|
||||
|
||||
#endif /* !DFU_H */
|
||||
Loading…
Reference in New Issue
Block a user