diff --git a/atusb/Makefile b/atusb/Makefile index 4fed8bd..15d6bc8 100644 --- a/atusb/Makefile +++ b/atusb/Makefile @@ -1,7 +1,7 @@ -.PHONY: all gen generate sch brd xpdf +.PHONY: all gen generate sch brd xpdf front back all: - @echo "make what ? target: gen sch brd xpdf" + @echo "make what ? target: gen sch brd xpdf front back" @exit 1 gen generate: @@ -16,3 +16,29 @@ brd: xpdf: xpdf atusb.pdf + +front: atusb-Front.ps + lpr $< + +back: atusb-Back.ps + lpr $< + +# +# Postscript for production of front/back layer, using the toner transfer +# method. Note that other artwork transfer methods may require different +# mirror settings. +# +# We use --ps-pads-drill-opt=none to avoid having any hole before drilling, +# which yields the best results with a CNC drill. For manual drilling, "real" +# would be preferrable. Do not use "small", for this created holes that are +# larger (!) than designed. +# +# Note: all this currenly only works properly if the board has been saved with +# all zones filled. +# + +atusb-Front.ps: atusb.brd + pcbnew -p=ps_a4 -l Front --ps-pads-drill-opt=none --mirror $< + +atusb-Back.ps: atusb.brd + pcbnew -p=ps_a4 -l Back --ps-pads-drill-opt=none $<