- atrf/fw/include/atspi/ep0.h enum atspi_requests), atrf/fw/atspi/ep0.c
(my_setup): new command ATSPI_POLL_INT to poll IRQ_RF
- atrf/fw/atspi/ep0.c (my_setup): ATSPI_BUILD sent one byte too many
- tools/lib/atusb.c (atusd_interrupt, atusb_driver): implemented interrupt
polling
- tools/lib/atusd.c: added section title for the RF interrupt function
- atrf/tools/: moved to tools/
- tools/Makefile: updated path to Makefile.recurse
- tools/atspi-id/Makefile, tools/atspi-reset/Makefile,
tools/atspi-rssi/Makefile, tools/atspi-trim/Makefile,
tools/atspi-txrx/Makefile, tools/lib/Makefile: updated paths to f32xbase
and to atrf/fw/include
- atrf/ecn/ecn0001.txt, atrf/ecn/ecn0002.txt: changed ECN format to
separate title from body by two blank lines and, where a conclusions has
been reached, put it into a section separated from body also by two blank
lines
- atrf/ecn/ecn0003.txt: researched balun design and availability
- atrf/ecn/INDEX, atrf/ecn/ecn0004.txt: new ECN: Take into account layout
considerations for RF
- TODO: removed item covered by ECN0002
- TODO: removed bug fixed in f32xbase commit
79396b17772639cea615d1c87870d55f08c11850
- TODO: added reference to ECN0003
- TODO: "cntr" now makes it to DFU and beyond
- atrf/fw/common/config.h (PLATFORM_SETUP): rename to PLATFORM_ENTER
- cntr/fw/common/config.h (PLATFORM_SETUP): rename to PLATFORM_ENTER and
make the new PLATFORM_SETUP turn off the watchdog
we now.
- atrf/fw/atspi/ep0.c: changed LQ to LQI in comments
- atrf/tools/atspi-txrx/atspi-txrx.c (receive): changed LQ to LQI in comment
and in diagnostic output
- atrf/fw/atspi/atspi.c (main): add a delay to give the host more time to
- atrf/fw/atspi/descr.c: we don't use EP1, so simplify the descriptors we
send. Keep the EP1 descriptors around (commented out) in case we need
them later, e.g., for interrupts.
- Makefile.recurse (all): reorder DIRS and TARGET_ONLY_DIRS, so that
tools/lib/ gets built before the tools that depend on it
- atrf/fw/atspi/ep0.c (do_buf_write): removed duplicate sending of
AT86RF230_BUF_WRITE
- atrf/fw/atspi/ep0.c (my_setup): generate the PHR in ATSPI_BUF_WRITE
instead of expecting the host to send it
- atrf/fw/atspi/ep0.c (my_setup): don't send the PHR to the host in
AT86RF230_BUF_READ
- atrf/fw/include/at86rf230.h (REG_TR_PWR): should be REG_PHY_TX_PWR
- atrf/tools/Makefile: added atspi-txrx and "lib"
- atrf/tools/atspi-txrx/Makefile: corrected path in F32XBASE
- atrf/tools/atspi-txrx/atspi-txrx.c: major rewrite
- atrf/tools/include/atspi.h, atrf/tools/lib/atspi.c: functions
atspi_buf_write and atspi_buf_read to access the frame buffer
- atrf/tools/Makefile: added atspi-trim
- atrf/tools/atspi-trim/Makefile, atrf/tools/atspi-trim/atspi-trim.c: show
and adjust the capacitors to trim the crystal oscillator
- atrf/tools/atspi-rssi/atspi-rssi.c: removed left-over FROM_DEV and TO_DEV
- fw/: moved to atrf/fw/
- tools/: moved to atrf/tools/
- atrf/fw/atspi/Makefile, atrf/fw/boot/Makefile: updated relative path to
f32xbase
- atrf/tools/Makefile: updated relative path to Makefile.recurse
- atrf/tools/atspi-id/Makefile, atrf/tools/atspi-reset/Makefile,
atrf/tools/atspi-rssi/Makefile, atrf/tools/lib/Makefile: updated relative
path to f32xbase
- atrf/fw/include/at86rf230.h: corrected path in title
- atrf/tools/include/atspi.h: added title and copyright header
