1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-18 06:30:36 +02:00
Commit Graph

11 Commits

Author SHA1 Message Date
Werner Almesberger
7c12bf02c1 tools/atrf-xmit/atrf-xmit.c: cleaned up timeouts and interrupt polling
- atrf-xmit.c (xfer_one): wait 10 ms for the packet to be sent (1 ms
  was clearly too short)
- atrf-xmit.c (xfer_one): use wait_for_interrupt instead of
  atrf_interrupt_wait, so that the retry logic can do its work
2011-06-23 13:21:25 -03:00
Werner Almesberger
b7276d282a atrf-xmit/atrf-xmit.c: updated to no longer use atrf_interrupt
- atrf-xmit.c (xfer_one): use atrf_interrupt_wait instead of
  atrf_interrupt to pull the interrupt line
- atrf-xmit.c (xfer_one): removed delay-based wait to interrupt
- atrf-xmit.c (xfer_one): use atrf_interrupt_wait instead of reading
  REG_IRQ_STATUS directly
2011-06-20 20:41:30 -03:00
Werner Almesberger
b4a6e8ef46 tools/: major overhaul of wait_for_interrupt; uses atrf_interrupt_wait now
- include/misctxrx.h (wait_for_interrupt), lib/misctxrx.c
  (wait_for_interrupt): replaced sleep_us*timeout limiting mechanism
  with a single timeout value in milliseconds
- lib/misctxrx.c (wait_for_interrupt): use atrf_interrupt_wait instead
  of polling
- lib/misctxrx.c (wait_for_interrupt): cleaned up control flow
- lib/misctxrx.c (run, die, wait_for_interrupt): renamed variable "run"
  to more specific "sigint"
- atrf-txrx/atrf-txrx.c (ping_rx, ping): pass timeout in milliseconds,
  not deciseconds
- atrf-rssi/atrf-rssi.c (sweep), atrf-rssi/gui.c (sweep),
  atrf-txrx/atrf-txrx.c (init_txrx, receive_message, receive_pcap,
  receive, transmit, transmit_pattern, ping_tx, ping_rx),
  atrf-xmit/atrf-xmit.c (init_tx, init_rx, xfer_one),
  lib/cwtest.c (enter_test_mode_230, start_test_mode_231):
  updated use of wait_for_interrupt
2011-06-20 20:08:42 -03:00
Werner Almesberger
106ef7ff7f tools/atrf-xmit/atrf-xmit.c: corrected title comment 2011-06-20 18:22:29 -03:00
Werner Almesberger
b0dd5ced20 tools/: updated tools to use flush_interrupts
- atrf-txrx/atrf-txrx.c (init_txrx), atrf-xmit/atrf-xmit.c
  (init_common): instead of reading REG_IRQ_STATUS, use
  flush_interrupts to flush interrupts
2011-06-20 17:27:19 -03:00
Werner Almesberger
4d4e132f0a atrf-xmit: tightened checking of interrupt behaviour
- atrf-xmit.c (xfer_one): also check that also the sender has no
  pending interrupts before we start sending
- atrf-xmit.c (xfer_one): interrupt poll loop (now disabled) checked
  the sender, not the receiver. oops.
- atrf-xmit.c (xfer_one): upon reception, check that the sender has
  finished (IRQ_TRX_END) as well
2011-06-09 21:08:14 -03:00
Werner Almesberger
abe923d2ef atrf-xmit: use receive interrupt instead of polling
- atrf-xmit.c (xfer_one): use wait_for_interrupt instead of polling
- atrf-xmit.c (xfer_one): fail if there's an unexpected receiver
  interrupt
2011-06-09 20:49:36 -03:00
Werner Almesberger
703ce81dfc atrf-xmit.c (xfer_one): pulse SLP_TR instead of sending TRX_CMD_TX_START
This makes sure we use SLP_TR just like the kernel does.
2011-06-09 20:39:24 -03:00
Werner Almesberger
558017e34d tools/atrf-xmit/atrf-xmit.c (xfer_one, usage, main): new option -v (verbose) 2011-05-18 16:49:38 -03:00
Werner Almesberger
c4167d8df4 atrf-xmit.c (usage): the "packets" argument is optional 2011-04-19 15:10:17 -03:00
Werner Almesberger
9ab94a53e2 tools: new utility atrf-xmit for fast transmission tests
- Makefile (DIRS): added atrf-xmit
- atrf-xmit/Makefile, atrf-xmit/atrf-xmit.c: new utility atrf-xmit to
  rapidly send packets from one device to another and analyze the outcome
2011-04-19 06:35:31 -03:00