10 Commits

Author	SHA1	Message	Date
Werner Almesberger	3584b5b736	Got "cntr" to show signs of life. It was the watchdog, as usual. ... - TODO: "cntr" now makes it to DFU and beyond - atrf/fw/common/config.h (PLATFORM_SETUP): rename to PLATFORM_ENTER - cntr/fw/common/config.h (PLATFORM_SETUP): rename to PLATFORM_ENTER and make the new PLATFORM_SETUP turn off the watchdog	2010-08-25 04:35:18 -03:00
Werner Almesberger	bb7b049f00	Literature consistently calls the Link Quality Indication LQI, not LQ. So do ... we now. - atrf/fw/atspi/ep0.c: changed LQ to LQI in comments - atrf/tools/atspi-txrx/atspi-txrx.c (receive): changed LQ to LQI in comment and in diagnostic output	2010-08-24 21:14:02 -03:00
Werner Almesberger	8f744bba63	Minor potential improvements of USB robustness. ... - atrf/fw/atspi/atspi.c (main): add a delay to give the host more time to - atrf/fw/atspi/descr.c: we don't use EP1, so simplify the descriptors we send. Keep the EP1 descriptors around (commented out) in case we need them later, e.g., for interrupts.	2010-08-24 21:12:57 -03:00
Werner Almesberger	2514804a79	Setting the transmit power was broken. (And LQ works, by the way.) ... - atrf/tools/atspi-txrx/atspi-txrx.c (set_power): don't wrap around at minimum power to maximum power	2010-08-24 07:17:42 -03:00
Werner Almesberger	73043a52ea	Finished and tested TX/RX. (LQ doesn't work yet, the rest does.) ... - Makefile.recurse (all): reorder DIRS and TARGET_ONLY_DIRS, so that tools/lib/ gets built before the tools that depend on it - atrf/fw/atspi/ep0.c (do_buf_write): removed duplicate sending of AT86RF230_BUF_WRITE - atrf/fw/atspi/ep0.c (my_setup): generate the PHR in ATSPI_BUF_WRITE instead of expecting the host to send it - atrf/fw/atspi/ep0.c (my_setup): don't send the PHR to the host in AT86RF230_BUF_READ - atrf/fw/include/at86rf230.h (REG_TR_PWR): should be REG_PHY_TX_PWR - atrf/tools/Makefile: added atspi-txrx and "lib" - atrf/tools/atspi-txrx/Makefile: corrected path in F32XBASE - atrf/tools/atspi-txrx/atspi-txrx.c: major rewrite - atrf/tools/include/atspi.h, atrf/tools/lib/atspi.c: functions atspi_buf_write and atspi_buf_read to access the frame buffer	2010-08-24 06:16:48 -03:00
Werner Almesberger	738618a945	Update IRQ_RF after reworking both boards. IRQ_RF was erroneously connected ... to P0_2 but it should go to P0_0. - atrf/fw/common/io.h: IRQ_RF is now at P0_0 - atrf/fw/atspi/atspi.c: updated and simplified P0 initialization	2010-08-23 23:02:43 -03:00
Werner Almesberger	b7700518d9	atspi-trim: utility to set the crystal trimming capacitors. ... - atrf/tools/Makefile: added atspi-trim - atrf/tools/atspi-trim/Makefile, atrf/tools/atspi-trim/atspi-trim.c: show and adjust the capacitors to trim the crystal oscillator - atrf/tools/atspi-rssi/atspi-rssi.c: removed left-over FROM_DEV and TO_DEV	2010-08-23 21:49:20 -03:00
Werner Almesberger	5109e0bd44	Basic framework for CNTR firmware. ... - atrf/fw/common/regs.h: forward to regs-f326.h - cntr/: added basic framework for CNTR firmware	2010-08-23 14:32:50 -03:00
Werner Almesberger	c2dd23840c	Moved fw/ and tools/ into atrf/ as well. ... - fw/: moved to atrf/fw/ - tools/: moved to atrf/tools/ - atrf/fw/atspi/Makefile, atrf/fw/boot/Makefile: updated relative path to f32xbase - atrf/tools/Makefile: updated relative path to Makefile.recurse - atrf/tools/atspi-id/Makefile, atrf/tools/atspi-reset/Makefile, atrf/tools/atspi-rssi/Makefile, atrf/tools/lib/Makefile: updated relative path to f32xbase - atrf/fw/include/at86rf230.h: corrected path in title - atrf/tools/include/atspi.h: added title and copyright header	2010-08-23 13:39:07 -03:00
Werner Almesberger	2c29b5b22e	Moved hardware design files from top-level directory to atrf/ ... - wpan-atrf.pro, wpan-atrf.sch, usb.sch, atrf.sch, wpan-atrf.cmp, wpan-atrf.brd, Makefile: moved to atrf/ - atrf/wpan-atrf.pro: updated paths to components/ and modules/ - Makefile: retained "dsv" section	2010-08-22 16:06:43 -03:00