qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-25 01:17:11 +02:00
Code

Commit Graph

  • 805db6ebf5 fw/atusb: add extra steps needed for HULUSB in README master Stefan Schmidt 2017-09-13 18:03:02 +0200
  • ea23c905d3 atusb/fw: Introduction of a new board named HULUSB Josef Filzmaier 2017-09-11 13:58:33 +0200
  • 8c574484b8 atusb/fw: Introduce DEBUG flag Josef Filzmaier 2017-09-11 13:58:32 +0200
  • ac710d0de4 web/index.html: update shop links; status table; link to ATUSB schematics Werner Almesberger 2017-05-10 09:11:00 -0300
  • 07b5bfddc0 atusb/atrf.sch: move invisible footprint test, to avoid confusing eeshow sysmocom Werner Almesberger 2017-03-22 21:12:34 -0300
  • a5ab9bbf0f atusb/: use page layout similar to eeschema's traditional default Werner Almesberger 2017-03-22 20:53:48 -0300
  • 49e7c83796 atusb/: use ""VDD" symbol from kicad-libs Werner Almesberger 2017-03-22 20:40:11 -0300
  • 624caeb006 atusb/: use VR, POWERED, and LED from kicad-libs Werner Almesberger 2017-03-22 20:33:37 -0300
  • cec05a0f5e atusb/atusb.pro: we don't use power.lib anymore Werner Almesberger 2017-03-17 04:56:07 -0300
  • 63ebcb535a web: update link to new firmware version Stefan Schmidt 2016-12-04 12:14:38 +0100
  • 03ee256a3b web: add 0.3 firmware binaries into release folder for web page Stefan Schmidt 2016-12-04 12:12:35 +0100
  • 5c5a93686b atusb/fw: update changelog for 0.3 firmware release v0.3-atusb-fw 2016-atusb-production-boot.hex Stefan Schmidt 2016-11-18 19:51:01 +0100
  • 35d14c74d6 atusb: fw: define a new hardware type for the rzusb dongle Stefan Schmidt 2016-04-26 21:28:31 +0200
  • ae1455cc7d atusb-eui64: print out set address with upper case characters in hex Stefan Schmidt 2016-11-19 11:30:15 +0100
  • 9c64024af5 atusb/Makefile: add missing atusb back layer to upload target Stefan Schmidt 2016-11-12 00:32:34 +0100
  • 5aa2adfb43 atusb/Makefile (upload): include atusb-Cmts.User.gbr; change upload dir Werner Almesberger 2016-09-01 10:36:12 -0300
  • c9e52c1978 atusb/atusb.kicad_pcb: bring back component references Werner Almesberger 2016-09-01 10:14:18 -0300
  • 79c9e3c134 atusb/Makefile (f, b): swap mask and copper layers for better visualization Werner Almesberger 2016-09-01 09:57:11 -0300
  • 0ff0c31c3f atusb/Makefile (f, b, upload): convenience targets Werner Almesberger 2016-09-01 03:46:24 -0300
  • b0a3001ca2 atusb/atusb.kicad_pcb (C15): resolve silk screen on pad; add via Werner Almesberger 2016-09-01 03:41:19 -0300
  • 1f003f1c21 atusb/atusb.kicad_pcb: grow RF feed trace to 1.9 mm, for 1.0 mm PCB Werner Almesberger 2016-09-01 02:57:20 -0300
  • 57d2184033 atusb/atusb.kicad_pcb: bump date to 20160901 Werner Almesberger 2016-09-01 02:50:19 -0300
  • de20220adc atusb/atusb.kicad_pcb: add "sysmocom" Werner Almesberger 2016-09-01 02:49:18 -0300
  • 9e18736076 atusb/atusb.cmp: remove (obsolete) Werner Almesberger 2016-09-01 02:46:41 -0300
  • e70e3399c7 atusb/atusb.kicad_pcb: reconnect ground; assign all zones to GND (from AGND) Werner Almesberger 2016-09-01 02:45:21 -0300
  • 240eab8f4e atusb/atusb.kicad_pcb: update footprints and reconnect antenna Werner Almesberger 2016-09-01 02:39:33 -0300
  • 63491d1c32 makefiles/Makefile.kicad (BRD): board file type is now .kicad_pcb Werner Almesberger 2016-09-01 02:37:56 -0300
  • c4caccce64 atusb/: convert to atusb.kicad_pcb; set solder mask clearance to 0 mm Werner Almesberger 2016-09-01 02:36:30 -0300
  • 0a59a0017f atusb/: bring back AGND and DGND Werner Almesberger 2016-09-01 02:26:41 -0300
  • bc8eb97664 atusb/: new-style footprint table; use MEANDER-2450MHz-right-1.0mm-RELAXED Werner Almesberger 2016-09-01 02:05:45 -0300
  • 434b4716d0 web: update status and links on the webpage Stefan Schmidt 2016-08-01 19:10:53 +0200
  • e587d39d3d atusb/usb.sch, atusb.pro: replace CONN_1 with TESTPOINT Werner Almesberger 2016-08-01 12:17:18 -0300
  • 087ef0ebf6 atusb/: use "r" and "c" from kicad-libs, instead of KiCad "device" Werner Almesberger 2016-08-01 12:10:15 -0300
  • 7df9215b38 atusb/: ATmega32U2 symbol was "lost"; update Werner Almesberger 2016-08-01 12:06:25 -0300
  • 869f3c43bd atusb: fw: use extended operation mode also for transmitting Stefan Schmidt 2016-04-22 22:21:09 +0200
  • dce8462939 atusb: fw: leave the FCS check to the kernel stack Stefan Schmidt 2016-03-31 22:30:29 +0200
  • c6e776e714 atusb: fw: make the ifdefs in mac handling transceiver specific and not board specific Stefan Schmidt 2016-03-30 22:12:10 +0200
  • dee10c1eb9 atusb: fw: make the ifdefs in mac handling transceiver specific and not board specific stefan/rzusb Stefan Schmidt 2016-03-30 22:12:10 +0200
  • 968721c335 atusb: fw: re-factor SPI, USB and board_app code for board specifics Stefan Schmidt 2016-03-30 22:08:00 +0200
  • 65912c2acb atusb: fw: first round of re-factor after the integration of rzusb as a board Stefan Schmidt 2016-03-30 00:03:48 +0200
  • 9d043dcfd4 atusb: fw: make sure we return correctly for both atusb as well as rzusb Stefan Schmidt 2016-03-18 22:25:24 +0100
  • 5129029d3b atusb: fw: add support for rzusbstick Alexander Aring 2015-05-24 14:37:38 +0200
  • fde38d59e3 atusb/fw: Bump version to 0.3 after adding EUI64 read/write handling Stefan Schmidt 2015-12-30 11:55:24 +0100
  • 583a7b72ee atusb/fw: add EUI64 read and write fw interface to permanently set an EUI64 Stefan Schmidt 2015-06-07 00:28:03 +0200
  • 55de8c6373 atusb-eui64: add utility to read/write and EUI64 from/to the device EEPROM Stefan Schmidt 2015-06-11 10:01:12 +0200
  • 15b15b9524 flashi/spi: Use tabs instead of spaces. Stefan Schmidt 2015-06-07 00:34:14 +0200
  • 37a4f00e41 atusb/fw/flash.c (flash_ops): fix placement of "const" Werner Almesberger 2015-05-29 09:43:02 -0300
  • 9e9f65992c Merge branch 'master' of projects.qi-hardware.com:ben-wpan Werner Almesberger 2015-05-22 04:52:35 -0300
  • a0e3ad301e web: Correct fw path for atusb release and make rsync verbose Stefan Schmidt 2015-05-22 09:46:14 +0200
  • d2a0bfa176 web: Add first atusb firmware release to website. Stefan Schmidt 2015-05-21 15:39:01 +0200
  • c6a87b488e web: Update links to linux-wpan project, driver and general status Stefan Schmidt 2015-05-21 15:34:14 +0200
  • 809a0935d8 atusb/fw: Bump minor version to mark first public release. v0.2-atusb-fw Stefan Schmidt 2015-05-20 11:16:18 +0200
  • 3ebd17f9e6 atusb/fw: Add build system support for adding a DFU suffix to the fw file Stefan Schmidt 2015-05-20 11:56:15 +0200
  • fc7551e532 atusb/fw: Use RX_AACK_ON instead of RX_ON in the firmware. Stefan Schmidt 2015-05-20 15:00:57 +0200
  • 464ab40e39 Revert "atusb/fw/usb/: enable MCU reset on USB bus reset after config selection" Stefan Schmidt 2015-03-17 15:30:42 +0100
  • f89ce523e8 atusb/fw/usb/usb.c (handle_setup): skip non-interface descriptors when processing SET_INTERFACE Werner Almesberger 2015-04-25 23:54:02 -0300
  • 428390047f fw/atusb/ (dfu_flash_ops): make const Werner Almesberger 2015-04-21 08:11:50 -0300
  • 4b6f390830 atusb/fw/usb/usb.c (handle_setup): also pass interface-level GET_DESCRIPTOR to get_descriptor Werner Almesberger 2015-04-12 04:16:23 -0300
  • f7e684bbde atusb/fw/usb/usb.h: add endpoint types Werner Almesberger 2015-04-12 04:15:04 -0300
  • a6c639bbb3 atusb/fw/usb/usb.h: add a few common class codes Werner Almesberger 2015-04-11 14:53:52 -0300
  • 88e2bde7d6 atusb/fw/usb/: fix incorrect code point for USB_CLASS_PER_INTERFACE Werner Almesberger 2015-04-11 14:49:41 -0300
  • b51d442c31 atusb/fw/usb/dfu.c (config_descriptor): correct alt settings off-by-one error Werner Almesberger 2014-10-23 02:06:55 -0300
  • f1e689eaa6 atusb/fw/: support alternative interface names with DFU Werner Almesberger 2014-03-25 20:54:09 -0300
  • 8f2f13c30a atusb/fw/: DFU: support multiple sets of flash operations; support multiple alt settings Werner Almesberger 2014-03-24 17:18:02 -0300
  • 8b0859486e atusb/fw/usb/: change a few more uses of ../board.h to board.h Werner Almesberger 2014-02-24 17:59:49 -0300
  • 71ad8dae76 makefiles/Makefile.kicad (GERBERS): auto-choose between old and new file names Werner Almesberger 2013-11-29 09:18:33 -0300
  • a80ba86476 atusb/fw/usb/usb.h: define PID types (LS/FS) Werner Almesberger 2013-11-17 02:37:28 -0300
  • c5f9cc1259 atusb/fw/: let include path find board.h instead of using ../board.h Werner Almesberger 2013-10-28 11:17:48 -0300
  • 4690466a53 tools/lib/atusb-common.c (atusb_interrupt_wait): fix embarrassing build failure Werner Almesberger 2013-09-28 14:44:00 -0300
  • bf067b3e73 atusb/fw/mac.c (RX_BUFS): increase buffer size from 2 to 3 frames Werner Almesberger 2013-07-30 20:38:13 -0300
  • 08f4ac98fa Merge branch 'buffer-frames' Werner Almesberger 2013-07-30 20:37:12 -0300
  • 873f80cb4d tools/atrf-txrx/atrf-txrx.c: option -q becomes "quick" and uses aggressive polling buffer-frames Werner Almesberger 2013-07-30 20:00:45 -0300
  • 07b1da29ec tools/lib/: aggressive polling for wait_for_interrupt, if timeout_ms = -1 Werner Almesberger 2013-07-30 19:59:11 -0300
  • 7fd9044d94 atusb/fw/: add SPI block reception Werner Almesberger 2013-07-30 19:46:55 -0300
  • d1b65cb058 tools/atrf-txrx/atrf-txrx.c: new option -q for quiet capture Werner Almesberger 2013-07-30 13:48:55 -0300
  • 0706773e38 atusb/fw/Makefile: improve size reporting (show segment sizes) Werner Almesberger 2013-07-24 17:18:33 -0300
  • a9d502850a atusb/fw/Makefile: improve size reporting (show segment sizes) Werner Almesberger 2013-07-24 17:18:33 -0300
  • 998ac7e5c6 atusb/fw/mac.c (next_buf): dedicated function for incrementing buffer indices Werner Almesberger 2013-07-24 16:21:38 -0300
  • b73d5fc1af atusb/fw/mac.c: remove queued_rx; buffer frames in the MCU instead Werner Almesberger 2013-07-24 07:57:35 -0300
  • 6416fa8d0b atusb/fw/mac.c: add section titles Werner Almesberger 2013-07-23 12:50:42 -0300
  • 172208e451 tools/atrf-txrx/atrf-txrx.c: use -x also on reception, to output message in hex Werner Almesberger 2013-06-23 02:03:26 -0300
  • a523e8d645 tools/atrf-txrx/atrf-txrx.c: new option -x to interpret messages as hex strings Werner Almesberger 2013-06-23 01:55:58 -0300
  • bb6acf15bc tools/atrf-txrx/atrf-txrx.c (usage): separate all sections by blank line Werner Almesberger 2013-06-23 01:29:56 -0300
  • 570982cc48 web/index.html: update Web page (including shop change from Tuxbrain to Pulster) Werner Almesberger 2013-05-07 21:25:24 -0300
  • 54630e0697 atben/misc/mkpatches: script to generate mails for the ATBEN kernel patches Werner Almesberger 2013-04-29 21:12:55 -0300
  • ec6c09dd9d atben-spi-performance.txt: clean up and describe role of referenced code Werner Almesberger 2013-04-29 20:05:54 -0300
  • ff9c7a8ce4 atben/misc/atben-spi-performance.txt: SPI performance comparison Werner Almesberger 2013-04-29 19:55:25 -0300
  • 367c1abb0e atusb/fw/: echo back TX ACK sequence number; don't panic if driver times out TX Werner Almesberger 2013-04-01 22:04:05 -0300
  • 9b2696b848 atusb/fw/usb/: enable MCU reset on USB bus reset after config selection Werner Almesberger 2013-04-01 15:54:44 -0300
  • 65722d417a atusb/fw/mac.c: queue frame reception if USB is busy Werner Almesberger 2013-04-01 15:17:37 -0300
  • ad70d7c129 include/atusb/atusb.h: salvage cute explanation of 0x1540 from usb-ids.h Werner Almesberger 2013-04-01 14:43:36 -0300
  • dab0d183a2 atusb/fw/include/atusb/usb-ids.h: remove (and adapt former users) Werner Almesberger 2013-04-01 14:40:14 -0300
  • d76bdf6a82 atusb/fw/mac.c (handle_irq): move frame reception to separate function Werner Almesberger 2013-04-01 14:29:57 -0300
  • 60ee82ba93 atusb/fw/mac.c (handle_irq): only handle TRX_END; never fall back to seq ints Werner Almesberger 2013-04-01 12:48:30 -0300
  • 3e749c3140 fw/include/atusb/ep0.h: protect also USB_DIR_IN and USB_DIR_OUT Werner Almesberger 2013-04-01 11:23:48 -0300
  • 16dd767857 fw/include/atusb/ep0.h (USB_TYPE_VENDOR): avoid conflict with /usr/include/usb.h Werner Almesberger 2013-04-01 05:59:18 -0300
  • 2d43876e4a atusb/fw/board.h: de-duplicate USB ID definitions (now originate from atusb.h) Werner Almesberger 2013-04-01 05:54:58 -0300
  • 12d3401f64 fw/include/atusb/: move shared protocol definitions from ep0.h to atusb.h Werner Almesberger 2013-04-01 05:47:12 -0300
  • 647f3c0375 atusb/fw/: get rid of some more "int"s Werner Almesberger 2013-03-29 19:19:49 -0300
  • a8db238cbb atusb/fw/: convert functions returning "int" to "bool" Werner Almesberger 2013-03-29 19:14:11 -0300