#!/bin/sh PATH=$PATH:/home/qi/cae-tools/cameo PATH=$PATH:/home/moko/svn.openmoko.org/developers/werner/cncmap/gp2rml NAME=atusb X=0 Y=2 cameo <<EOF mm gerber 35mil ../$NAME-PCB_Edges.gbr rotate 90 align 1 4.4mm 12.1mm # align relative to board corner translate 4mm 4mm # move to PCB zone assigned to project array +3mm +3mm $X $Y z 0 -58.9mm # board surface (tool fully retracted) z 1.5mm # slack for extending the tool z -0.8mm # board thickness z -0.5mm # tool extra depth clear excellon ../$NAME.drl drill 7mil 15mil # 12.5-13.5 mil drill optimize write drill.gp remainder mill 20mil 0.01mm # 35 mil endmill; pretend it is a little smaller, # to compensate for tool/board deflections write mill.gp remainder empty gerber 32mil ../$NAME-PCB_Edges.gbr # 35 mil endmill, 3 mil deflection offset append mill.gp EOF gp2rml 2 0.5 0.5 mill.gp >mill.rml gp2rml 2 0.1 0.5 drill.gp >drill.rml cat <<EOF >Makefile.mkmk SPOOL=/home/moko/svn.openmoko.org/developers/werner/cncmap/spool/spool CNGT=/home/qi/cae-tools/cngt/cngt .PHONY: mill drill cng plot dplot mill: PORT=/dev/ttyUSB0 \$(SPOOL) mill.rml drill: PORT=/dev/ttyUSB0 \$(SPOOL) drill.rml cng: \$(CNGT) -57.4 20 mill.gp plot: echo 'plot "drill.gp" with points, "mill.gp" with lines' | \\ gnuplot -persist dplot: echo 'plot "< sed /^\$\$/d drill.gp" with linespoints' | \\ gnuplot -persist clean:: rm -f mill.gp mill.rml drill.gp drill.rml EOF