/* * atspi-rssi/atspi-rssi.c - ben-wpan AT86RF230 spectrum scan * * Written 2010 by Werner Almesberger * Copyright 2010 Werner Almesberger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include "at86rf230.h" #include "atspi.h" #include "misctxrx.h" static struct timeval t0; static volatile int run = 1; static void sweep(struct atspi_dsc *dsc) { int chan, rssi; struct timeval t; for (chan = 11; chan <= 26; chan++) { atspi_reg_write(dsc, REG_PHY_CC_CCA, chan); /* 150 us, according to AVR2001 section 3.5 */ wait_for_interrupt(dsc, IRQ_PLL_LOCK, IRQ_PLL_LOCK, 10, 20); /* * No need to explicitly wait for the PPL lock - going USB-SPI * is pretty slow, leaving the transceiver plenty of time. */ gettimeofday(&t, NULL); rssi = atspi_reg_read(dsc, REG_PHY_RSSI) & RSSI_MASK; t.tv_sec -= t0.tv_sec; t.tv_usec -= t0.tv_usec; printf("%d %f %d\n", 2405+(chan-11)*5, (double) t.tv_sec+t.tv_usec/1000000.0, -91+3*(rssi-1)); } printf("\n"); } static void die(int sig) { run = 0; } static void usage(const char *name) { fprintf(stderr, "usage: %s sweeps \n", name); exit(1); } int main(int argc, const char **argv) { struct atspi_dsc *dsc; unsigned long sweeps, i; char *end; if (argc != 2) usage(*argv); sweeps = strtoul(argv[1], &end, 0); if (*end) usage(*argv); signal(SIGINT, die); dsc = atspi_open(); if (!dsc) return 1; atspi_reg_write(dsc, REG_TRX_STATE, TRX_CMD_TRX_OFF); atspi_reg_write(dsc, REG_TRX_STATE, TRX_CMD_RX_ON); /* * We'll wait for the PLL lock after selecting the channel. */ gettimeofday(&t0, NULL); for (i = 0; run && i != sweeps; i++) sweep(dsc); atspi_reg_write(dsc, REG_TRX_STATE, TRX_CMD_TRX_OFF); atspi_close(dsc); return 0; }