| .. |
|
atrf-gpio
|
tools/atrf-gpio/atusb.c (restore_gpios): send ATUSB_GPIO_CLEANUP
|
2011-06-20 23:15:30 -03:00 |
|
atrf-id
|
tools/: fix artf_at86rf23[01] (should be atrf...) typo
|
2013-03-28 14:24:28 -03:00 |
|
atrf-path
|
tools/: moved get_key from atrf-path/gui.c to libatrf, for sharing
|
2011-07-04 20:29:22 -03:00 |
|
atrf-proxy
|
tools/atrf-proxy/: make WAIT 0 wait forever
|
2011-06-20 22:14:52 -03:00 |
|
atrf-reset
|
tools/: added option -d driver[:arg] to all tools
|
2011-04-10 07:28:27 -03:00 |
|
atrf-rssi
|
tools/atrf-rssi/gui.c (gui): accept keyboard input both from stdin and SDL
|
2011-07-04 20:29:22 -03:00 |
|
atrf-trim
|
atrf-trim.c (main): passing the trim value is not a usage error
|
2011-04-10 17:28:09 -03:00 |
|
atrf-txrx
|
tools/atrf-txrx/atrf-txrx.c: option -q becomes "quick" and uses aggressive polling
|
2013-07-30 20:16:02 -03:00 |
|
atrf-xmit
|
tools/atrf-xmit/atrf-xmit.c: cleaned up timeouts and interrupt polling
|
2011-06-23 13:21:25 -03:00 |
|
atrf-xtal
|
tools/: fix artf_at86rf23[01] (should be atrf...) typo
|
2013-03-28 14:24:28 -03:00 |
|
atusb-eui64
|
atusb-eui64: print out set address with upper case characters in hex
|
2016-11-23 23:40:41 +01:00 |
|
dirtpan
|
switch linux-zigbee tools source from (old) tarball to git repository
|
2011-07-04 20:29:22 -03:00 |
|
include
|
tools/lib/: aggressive polling for wait_for_interrupt, if timeout_ms = -1
|
2013-07-30 20:16:02 -03:00 |
|
lib
|
tools/lib/atusb-common.c (atusb_interrupt_wait): fix embarrassing build failure
|
2013-09-28 14:44:00 -03:00 |
|
usbperf
|
tools/usbperf/: measure the rate of control transfers a device can do
|
2011-07-09 23:14:41 -03:00 |
|
usbwait
|
tools/usbwait/usbwait.c: new option -r to require removal before appearance
|
2011-05-11 05:21:45 -03:00 |
|
Makefile
|
atusb-eui64: add utility to read/write and EUI64 from/to the device EEPROM
|
2016-03-17 22:29:43 +01:00 |
|
Makefile.common
|
dropped f32xbase dependency on Makefile.common
|
2011-05-29 06:03:11 -03:00 |
ae1455cc7d