mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-11-16 21:52:49 +02:00
df071c3398
adding an inductor to the clock line. - ecn/INDEX, ecn/ecn0005.txt: new ECN discussing the switch to a capacitative clock voltage divider. With frequency measurements. - atusd/tests/send-20100910: measurement of transceiver performance when placing an inductor in the 16 MHz clock line.
38 lines
1.2 KiB
Plaintext
38 lines
1.2 KiB
Plaintext
Correct atusd clock voltage divider
|
|
|
|
|
|
According to section 9.6.3 of the data sheet, an external clock supplied
|
|
to the AT86RF230 has a minimum peak-to-peak voltage of 400 mV and a
|
|
maximum of only 500 mV. Furthermore, the signal must be DC-free.
|
|
|
|
The voltage divider in the 20100903 and 20100908 designs is too sensitive
|
|
to interference and the PLL constantly unlocks, rendering the device
|
|
dysfunctional.
|
|
|
|
A more robust divider circuit can be obtained with the following
|
|
replacements: C7 -> 0R, R3 -> 33 pF, R4 -> 220 pF. After reworking the
|
|
20100908 boards, they no longer suffer PLL unlocks.
|
|
|
|
A Qucs simulation of the circuit can be found in ../atusd/sim/cdiv.sim
|
|
|
|
Frequency measurements yield the following results:
|
|
|
|
Host Board Error Meas. accuracy
|
|
(f, ppm) (ppm, nom.)
|
|
------- --------------- --------------- ---------------
|
|
Ben #2 20100908-A +2 99.7
|
|
+1 99.6
|
|
Ben #1 20100908-A +23 99.7
|
|
+24 99.9
|
|
Ben #1 20100908-B +24 99.4
|
|
+24 99.7
|
|
Ben #2 20100908-B +2 99.8
|
|
+2 99.9
|
|
|
|
The Ben's 12 MHz crystal has a tolerance of +/- 30 ppm, which is better
|
|
than the +/- 40 ppm required by IEEE 802.15.4.
|
|
|
|
What remains to be verified is whether this change causes interferences
|
|
that may affect transceiver performance and may also violate emission
|
|
regulations.
|