mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-12-11 13:24:05 +02:00
d233c04c86
- usb/usb.h, usb/atu2.c (usb_reset): reset the USB bus by detaching and re-attaching the device - boot.c (main): force a USB reset before running the payload - usb/atu2.c (usb_poll): test for USB reset from the host (in progress) - usb/dfu.c (my_reset, dfu_init): register user USB reset handler
285 lines
6.1 KiB
C
285 lines
6.1 KiB
C
/*
|
|
* boot/dfu.c - DFU protocol engine
|
|
*
|
|
* Written 2008-2011 by Werner Almesberger
|
|
* Copyright 2008-2011 Werner Almesberger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
|
|
*/
|
|
|
|
/*
|
|
* A few, erm, shortcuts:
|
|
*
|
|
* - we don't bother with the app* states since DFU is all this firmware does
|
|
* - after DFU_DNLOAD, we just block until things are written, so we never
|
|
* enter dfuDNLOAD_SYNC or dfuDNBUSY
|
|
* - no dfuMANIFEST_SYNC, dfuMANIFEST, or dfuMANIFEST_WAIT_RESET
|
|
* - to keep our buffers small, we only accept EP0-sized blocks
|
|
*/
|
|
|
|
|
|
#include <stdint.h>
|
|
|
|
#include "usb.h"
|
|
#include "dfu.h"
|
|
|
|
#include "../board.h"
|
|
|
|
|
|
#ifndef NULL
|
|
#define NULL 0
|
|
#endif
|
|
|
|
#define debug(...)
|
|
#define error(...)
|
|
|
|
|
|
const uint8_t device_descriptor[] = {
|
|
18, /* bLength */
|
|
USB_DT_DEVICE, /* bDescriptorType */
|
|
LE(0x100), /* bcdUSB */
|
|
USB_CLASS_PER_INTERFACE,/* bDeviceClass */
|
|
0x00, /* bDeviceSubClass (per interface) */
|
|
0x00, /* bDeviceProtocol (per interface) */
|
|
EP0_SIZE, /* bMaxPacketSize */
|
|
LE(DFU_USB_VENDOR), /* idVendor */
|
|
LE(DFU_USB_PRODUCT), /* idProduct */
|
|
LE(0x0001), /* bcdDevice */
|
|
0, /* iManufacturer */
|
|
0, /* iProduct */
|
|
0, /* iSerialNumber */
|
|
1 /* bNumConfigurations */
|
|
};
|
|
|
|
|
|
const uint8_t config_descriptor[] = {
|
|
9, /* bLength */
|
|
USB_DT_CONFIG, /* bDescriptorType */
|
|
LE(9+9), /* wTotalLength */
|
|
1, /* bNumInterfaces */
|
|
1, /* bConfigurationValue (> 0 !) */
|
|
0, /* iConfiguration */
|
|
// USB_ATTR_SELF_POWERED | USB_ATTR_BUS_POWERED,
|
|
USB_ATTR_BUS_POWERED, /* bmAttributes */
|
|
15, /* bMaxPower */
|
|
|
|
/* Interface #0 */
|
|
|
|
9, /* bLength */
|
|
USB_DT_INTERFACE, /* bDescriptorType */
|
|
0, /* bInterfaceNumber */
|
|
0, /* bAlternateSetting */
|
|
0, /* bNumEndpoints */
|
|
0xfe, /* bInterfaceClass (application specific) */
|
|
0x01, /* bInterfaceSubClass (device fw upgrade) */
|
|
0x02, /* bInterfaceProtocol (DFU mode protocol) */
|
|
0, /* iInterface */
|
|
};
|
|
|
|
|
|
static const uint8_t functional_descriptor[] = {
|
|
9, /* bLength */
|
|
DFU_DT_FUNCTIONAL, /* bDescriptorType */
|
|
0xf, /* bmAttributes (claim omnipotence :-) */
|
|
LE(0xffff), /* wDetachTimeOut (we're very patient) */
|
|
LE(EP0_SIZE), /* wTransferSize */
|
|
LE(0x101), /* bcdDFUVersion */
|
|
};
|
|
|
|
|
|
struct dfu dfu = {
|
|
OK,
|
|
LE(1000), 0,
|
|
dfuIDLE,
|
|
0,
|
|
};
|
|
|
|
|
|
static uint16_t next_block = 0;
|
|
static int did_download;
|
|
|
|
|
|
static uint8_t buf[EP0_SIZE];
|
|
|
|
|
|
static void block_write(void *user)
|
|
{
|
|
uint16_t *size = user;
|
|
|
|
flash_write(buf, *size);
|
|
}
|
|
|
|
|
|
static int block_receive(uint16_t length)
|
|
{
|
|
static uint16_t size;
|
|
|
|
if (!flash_can_write(length)) {
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errADDRESS;
|
|
return 0;
|
|
}
|
|
if (length > EP0_SIZE) {
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errUNKNOWN;
|
|
return 0;
|
|
}
|
|
size = length;
|
|
usb_recv(&eps[0], buf, size, block_write, &size);
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int block_transmit(uint16_t length)
|
|
{
|
|
uint16_t got;
|
|
|
|
if (length > EP0_SIZE) {
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errUNKNOWN;
|
|
return 1;
|
|
}
|
|
got = flash_read(buf, length);
|
|
if (got < length) {
|
|
length = got;
|
|
dfu.state = dfuIDLE;
|
|
}
|
|
usb_send(&eps[0], buf, length, NULL, NULL);
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int my_setup(const struct setup_request *setup)
|
|
{
|
|
int ok;
|
|
|
|
switch (setup->bmRequestType | setup->bRequest << 8) {
|
|
case DFU_TO_DEV(DFU_DETACH):
|
|
debug("DFU_DETACH\n");
|
|
/*
|
|
* The DFU spec says thay this is sent in protocol 1 only.
|
|
* However, dfu-util also sends it to get out of DFU mode,
|
|
* so we just don't make a fuss and ignore it.
|
|
*/
|
|
return 1;
|
|
case DFU_TO_DEV(DFU_DNLOAD):
|
|
debug("DFU_DNLOAD\n");
|
|
if (dfu.state == dfuIDLE) {
|
|
next_block = setup->wValue;
|
|
flash_start();
|
|
}
|
|
else if (dfu.state != dfuDNLOAD_IDLE) {
|
|
error("bad state\n");
|
|
return 0;
|
|
}
|
|
if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
|
|
debug("retransmisson\n");
|
|
return 1;
|
|
}
|
|
if (setup->wValue != next_block) {
|
|
debug("bad block (%d vs. %d)\n",
|
|
setup->wValue, next_block);
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errUNKNOWN;
|
|
return 1;
|
|
}
|
|
if (!setup->wLength) {
|
|
debug("DONE\n");
|
|
flash_end_write();
|
|
dfu.state = dfuIDLE;
|
|
did_download = 1;
|
|
return 1;
|
|
}
|
|
ok = block_receive(setup->wLength);
|
|
next_block++;
|
|
dfu.state = dfuDNLOAD_IDLE;
|
|
return ok;
|
|
case DFU_FROM_DEV(DFU_UPLOAD):
|
|
debug("DFU_UPLOAD\n");
|
|
if (dfu.state == dfuIDLE) {
|
|
next_block = setup->wValue;
|
|
flash_start();
|
|
}
|
|
else if (dfu.state != dfuUPLOAD_IDLE)
|
|
return 0;
|
|
if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
|
|
debug("retransmisson\n");
|
|
/* @@@ try harder */
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errUNKNOWN;
|
|
return 1;
|
|
}
|
|
if (setup->wValue != next_block) {
|
|
debug("bad block (%d vs. %d)\n",
|
|
setup->wValue, next_block);
|
|
dfu.state = dfuERROR;
|
|
dfu.status = errUNKNOWN;
|
|
return 1;
|
|
}
|
|
ok = block_transmit(setup->wLength);
|
|
next_block++;
|
|
dfu.state = dfuUPLOAD_IDLE;
|
|
return ok;
|
|
case DFU_FROM_DEV(DFU_GETSTATUS):
|
|
debug("DFU_GETSTATUS\n");
|
|
usb_send(&eps[0], (uint8_t *) &dfu, sizeof(dfu), NULL, NULL);
|
|
return 1;
|
|
case DFU_TO_DEV(DFU_CLRSTATUS):
|
|
debug("DFU_CLRSTATUS\n");
|
|
dfu.state = dfuIDLE;
|
|
dfu.status = OK;
|
|
return 1;
|
|
case DFU_FROM_DEV(DFU_GETSTATE):
|
|
debug("DFU_GETSTATE\n");
|
|
usb_send(&eps[0], &dfu.state, 1, NULL, NULL);
|
|
return 1;
|
|
case DFU_TO_DEV(DFU_ABORT):
|
|
debug("DFU_ABORT\n");
|
|
dfu.state = dfuIDLE;
|
|
dfu.status = OK;
|
|
return 1;
|
|
default:
|
|
error("DFU rt %x, rq%x ?\n",
|
|
setup->bmRequestType, setup->bRequest);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
|
|
static int my_descr(uint8_t type, uint8_t index, const uint8_t **reply,
|
|
uint8_t *size)
|
|
{
|
|
if (type != DFU_DT_FUNCTIONAL)
|
|
return 0;
|
|
*reply = functional_descriptor;
|
|
*size = sizeof(functional_descriptor);
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void my_reset(void)
|
|
{
|
|
#if 0
|
|
/* @@@ not nice -- think about where this should go */
|
|
extern void run_payload(void);
|
|
|
|
if (did_download)
|
|
run_payload();
|
|
#endif
|
|
}
|
|
|
|
|
|
void dfu_init(void)
|
|
{
|
|
user_setup = my_setup;
|
|
user_get_descriptor = my_descr;
|
|
user_reset = my_reset;
|
|
}
|