Werner Almesberger 138a1beeff atusb: slightly adjusted some component values for easier sourcing ...

- usb.sch (R1): changed from 68 Ohm to 180 Ohm, to decrease BOM size
- atrf.sch (C17): changed from 1 pF to 2.2 pF (value is more common,
  and it can only help to reduce harmonics)
- atusb.sch, usb.sch, atrf.sch: bumped version to 20110214
- atusb.cmp: updated

2011-02-14 01:55:46 -03:00

..

cam

atusb/cam/mkmk: updated board parameters for latest run

2011-02-10 06:50:22 -03:00

fw

atusb/fw2/: assigned hardware revision code point; some cleanup

2011-02-10 07:24:37 -03:00

fw2

fw2/Makefile: dependencies, verbosity control, cleanup

2011-02-11 09:42:21 -03:00

fw3

atusb/fw3/: adaptation of the f32xbase USB stack

2011-02-13 23:46:36 -03:00

atrf.sch

atusb: slightly adjusted some component values for easier sourcing

2011-02-14 01:55:46 -03:00

atusb.brd

atusb.brd: draw in bottom edge by 5 mil to prevent touching the connector

2011-02-10 14:40:56 -03:00

atusb.cmp

atusb: slightly adjusted some component values for easier sourcing

2011-02-14 01:55:46 -03:00

atusb.pro

atusb: new layout for the ATmega32U2

2011-01-31 04:57:02 -03:00

atusb.sch

atusb: slightly adjusted some component values for easier sourcing

2011-02-14 01:55:46 -03:00

Makefile

atben/Makefile (clean), atusb/Makefile (clean): remove Gerbers

2011-01-17 22:40:15 -03:00

usb.sch

atusb: slightly adjusted some component values for easier sourcing

2011-02-14 01:55:46 -03:00