Werner Almesberger e9147b0ba9 Major redesign of "cntr" circuit. ... - cntr/cntr.pro: added usb_a_plug.lib, mmcx-f-edge.mod, usb_a_plug_smt.mod, and sot-323.mod - cntr/cntr.sch, cntr/cntr.brd: reassigned LED and pull GPIO for easier routing - cntr/cntr.sch, cntr/cntr.brd: replaced mini-USB receptacle with USB A plug and removed 0 Ohm resistor previously used for swapping D+/D- - cntr/cntr.sch, cntr/cntr.brd: changed TVSs on USB from 200 pF 0603 to 100 pF 0402 type - cntr/cntr.sch, cntr/cntr.brd: replaced basically unterminated 100 mil header with properly terminated MMCX connector - cntr/cntr.brd: reduced board width (nominally 15.8 mm) to USB connector width (16 mm) - modules/mmcx-f-edge.fpd: swap contacts for compatibility with "BNC" symbol		2010-10-25 08:44:41 -03:00
..
0805-6.fpd	Assorted small layout improvements.	2010-09-03 08:02:07 -03:00
INFO	SOT-323 footprint for MMST3904 NPN transistor (use NPN standard symbol)	2010-10-25 04:09:08 -03:00
Makefile	SOT-323 footprint for MMST3904 NPN transistor (use NPN standard symbol)	2010-10-25 04:09:08 -03:00
meander.fpd	Added antenna tuning "tail" suggested by Joerg. Made board slimmer.	2010-09-12 12:25:57 -03:00
mini-usb.fpd	Reuse some symbols and footprints from IDBG and gta02-core.	2010-08-09 15:48:06 -03:00
mmcx-f-edge.fpd	Major redesign of "cntr" circuit.	2010-10-25 08:44:41 -03:00
qfn.fpd	Added QFN28 and QFN32 footprints for MCU and TXRX.	2010-08-12 09:39:13 -03:00
qfp.fpd	New circuit: an arbitrary-precision counter.	2010-08-22 21:32:54 -03:00
sot-323.fpd	SOT-323 footprint for MMST3904 NPN transistor (use NPN standard symbol)	2010-10-25 04:09:08 -03:00
usb_a_plug_smt.fpd	Added Molex 0480371000 USB A plug (SMT)	2010-10-25 03:07:03 -03:00
xtal-4.fpd	Added modules for test points and solder pads. Some cleanup.	2010-08-12 15:28:03 -03:00