Werner Almesberger 4244af265c tools/lib/cwtest.c (cw_test_end): try "quick reset" on AT86RF231 ... The transceiver reset takes quite a while. It seems that also going into sleep mode has the effect of stopping cw test mode and it's much faster. This has only been tried on the AT86RF231. For AT86RF230, we therefore still use the reset. Performance improvement: Measurement: atrf-path sweep time in GUI mode, averaging over 10 samples. Running on PC with remote ATBEN transceivers. before 7.36-7.68 s after 2.08 s (27-28% of previous time)		2011-04-13 11:54:26 -03:00
..
atrf-id	tools/: two small usage fixes	2011-04-10 11:28:16 -03:00
atrf-path	tools/atrf-path/gui.c: temporarily added code for sweep time measurements	2011-04-13 08:54:26 -03:00
atrf-proxy	atrf-proxy.c (loop): use SO_REUSEADDR to avoid "address already in use"	2011-04-12 06:58:55 -03:00
atrf-reset	tools/: added option -d driver[:arg] to all tools	2011-04-10 07:28:27 -03:00
atrf-rssi	- atrf-rssi.c (gui): moved system-dependent definition to gui.h	2011-04-12 22:47:18 -03:00
atrf-trim	atrf-trim.c (main): passing the trim value is not a usage error	2011-04-10 19:55:47 -03:00
atrf-txrx	tools/: moved function to set transmit power from atrf-txrx to libatrf	2011-04-12 16:37:05 -03:00
atrf-xtal	tools/: cleaned up the gross layering violation in atrf-xtal/atben.c	2011-04-10 07:28:27 -03:00
include	libatrf: further modularized transmit power setting and exported conversion	2011-04-12 18:41:03 -03:00
lib	tools/lib/cwtest.c (cw_test_end): try "quick reset" on AT86RF231	2011-04-13 11:54:26 -03:00
Makefile	tools: new utility atrf-path to measure path characteristics	2011-04-12 19:43:45 -03:00
Makefile.common	tools/Makefile.common: offer LDLIBS_$(TARGET) twice (hack - needs more study)	2011-03-03 23:17:32 -03:00