mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-12-28 18:26:46 +02:00
f4342f49ae
- modules/usb_a_plug_smt.fpd: enlarged hole for positioning pins from 1.1 mm to 1.15 mm - atusb/usb.sch, atusb/atusb.cmp, atusb/atusb.brd: removed trailing space from CON1's value - atusb/atusb.sch, atusb/usb.sch, atusb/atrf.sch: schematics title still said AT86RF230, not 231 - atusb/README-SMT: corrected a typo - atusb/README-PCB: specified the tolerance of the hole for the positioning pins of the USB connector - atusb/README-PCB: added the 16-17 mm hole for the USB connector to the specification - atusb/: bumped all version numbers to 20110330
66 lines
2.0 KiB
Plaintext
66 lines
2.0 KiB
Plaintext
Board characteristics:
|
|
|
|
- stacking: 2 layers, solder mask on front and back, silk screen on front
|
|
- board material: FR4, thickness 0.8 mm (1/32"), 1 oz copper
|
|
- surface finish: TBD, ENIG is preferred
|
|
- via holes: diameter is nominally 10 mil, but any size <= 15 mil can be used
|
|
- ground via of the antenna: hole diameter is nominally 8 mil, but any size
|
|
<= 15 mil can be used
|
|
- mechanical tolerances: <= +/- 0.1 mm on all sides
|
|
- the holes for the positioning pins of the USB connector have a nominal
|
|
diameter of 1.15 mm. The minimum finished hole size must be 1.10 mm,
|
|
maximum 1.25 mm.
|
|
|
|
|
|
Hole for the USB connector:
|
|
|
|
The USB connector extends below (!) the surface of the PCB. For SMT, a
|
|
16-17 mm hole must be left next to the PCB's edge:
|
|
|
|
<-17mm->
|
|
+------+-------------+
|
|
| |- |
|
|
| Hole | PCB |
|
|
| |- |
|
|
+------+-------------+
|
|
|
|
For illustration:
|
|
http://downloads.qi-hardware.com/people/werner/wpan/tmp/usb-off-board.jpg
|
|
|
|
|
|
Layer stacking, from top to bottom:
|
|
|
|
atusb-SilkS_Front.gto Front silk screen
|
|
atusb-Mask_Front.gts Front solder mask
|
|
atusb-Front.gtl Front copper
|
|
atusb-Back.gbl Back copper
|
|
atusb-Mask_Back.gbs Back solder mask
|
|
|
|
|
|
Other design files:
|
|
|
|
atusb-front.png Illustration of the PCB's front side
|
|
atusb-back.png idem, for the back side
|
|
atusb-PCB_Edges.gbr Board edges, for routing (Gerber)
|
|
atusb.dxf idem (AutoCAD DXF)
|
|
atusb.drl Excellon drill file
|
|
atusb-SoldP_Front.gtp Front solder paste, for stencil
|
|
|
|
|
|
Interpretation of files:
|
|
|
|
- for all coordinates, the origin is the lower left corner of the board
|
|
- do not print component values on silk screen
|
|
- the center (!) of the board edge line marks the true board edge, e.g.,
|
|
|
|
Edge line (5 mil)
|
|
=======
|
|
------- - - - - - ----------
|
|
| |
|
|
PCB outside | | PCB inside
|
|
| |
|
|
------- - - - - - ----------
|
|
|
|
|
Volume removed when cutting
|
|
(width depends on tool used)
|