1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-25 22:39:22 +02:00
ben-wpan/atusb-sil/fw/include/at86rf230.h
Werner Almesberger 2642b9e1c3 atusb-sil/: moved C8051F326-related material out of atusb/
- Makefile, atusb.pro, atusb.sch, atrf.sch, usb.sch, atusb.cmp, atusb.brd:
  resurrected from git history (commit
  14b00823b0)
- fw/: moved all C8051F326-specific files over from atusb/fw/
- fw/include/: copied MCU-independent files over from atusb/fw/include/
2011-02-22 00:17:13 -03:00

403 lines
9.5 KiB
C

/*
* include/at86rf230.h - AT86RF230/AT86RF231 protocol and register definitions
*
* Written 2008-2011 by Werner Almesberger
* Copyright 2008-2011 Werner Almesberger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT86RF230_H
#define AT86RF230_H
enum {
AT86RF230_REG_WRITE = 0xc0, /* 11... */
AT86RF230_REG_READ = 0x80, /* 10... */
AT86RF230_BUF_WRITE = 0x60, /* 011... */
AT86RF230_BUF_READ = 0x20, /* 001... */
AT86RF230_SRAM_WRITE = 0x40, /* 010... */
AT86RF230_SRAM_READ = 0x00 /* 000... */
};
#define MAX_PSDU 127 /* octets, see AT86RF230 manual section 8.1 */
#define SRAM_SIZE 128
/* --- Registers ----------------------------------------------------------- */
enum {
REG_TRX_STATUS = 0x01,
REG_TRX_STATE = 0x02,
REG_TRX_CTRL_0 = 0x03,
REG_TRX_CTRL_1 = 0x04, /* 231 only */
REG_PHY_TX_PWR = 0x05,
REG_PHY_RSSI = 0x06,
REG_PHY_ED_LEVEL = 0x07,
REG_PHY_CC_CCA = 0x08,
REG_CCA_THRES = 0x09,
REG_RX_CTRL = 0x0a, /* 231 only */
REG_SFD_VALUE = 0x0b, /* 231 only */
REG_TRX_CTRL_2 = 0x0c, /* 231 only */
REG_ANT_DIV = 0x0d, /* 231 only */
REG_IRQ_MASK = 0x0e,
REG_IRQ_STATUS = 0x0f,
REG_VREG_CTRL = 0x10,
REG_BATMON = 0x11,
REG_XOSC_CTRL = 0x12,
REG_RX_SYN = 0x15, /* 231 only */
REG_XAH_CTRL_1 = 0x17, /* 231 only */
REG_FTN_CTRL = 0x18, /* 231 only */
REG_PLL_CF = 0x1a,
REL_PLL_DCU = 0x1b,
REG_PART_NUM = 0x1c,
REG_VERSION_NUM = 0x1d,
REG_MAN_ID_0 = 0x1e,
REG_MAN_ID_1 = 0x1f,
REG_SHORT_ADDR_0 = 0x20,
REG_SHORT_ADDR_1 = 0x21,
REG_PAN_ID_0 = 0x22,
REG_PAN_ID_1 = 0x23,
REG_IEEE_ADDR_0 = 0x24,
REG_IEEE_ADDR_1 = 0x25,
REG_IEEE_ADDR_2 = 0x26,
REG_IEEE_ADDR_3 = 0x27,
REG_IEEE_ADDR_4 = 0x28,
REG_IEEE_ADDR_5 = 0x29,
REG_IEEE_ADDR_6 = 0x2a,
REG_IEEE_ADDR_7 = 0x2b,
REG_XAH_CTRL_0 = 0x2c, /* XAH_CTRL in 230 */
REG_CSMA_SEED_0 = 0x2d,
REG_CSMA_SEED_1 = 0x2e,
REG_CSMA_BE = 0x2f, /* 231 only */
REG_CONT_TX_0 = 0x36,
REG_CONT_TX_1 = 0x3d, /* 230 only */
};
/* --- TRX_STATUS --- ------------------------------------------------------ */
#define CCA_DONE (1 << 7)
#define CCA_STATUS (1 << 6)
#define TRX_STATUS_SHIFT 0
#define TRX_STATUS_MASK 0x1f
enum {
TRX_STATUS_P_ON = 0x00, /* reset default */
TRX_STATUS_BUSY_RX = 0x01,
TRX_STATUS_BUSY_TX = 0x02,
TRX_STATUS_RX_ON = 0x06,
TRX_STATUS_TRX_OFF = 0x08,
TRX_STATUS_PLL_ON = 0x09,
TRX_STATUS_SLEEP = 0x0f,
TRX_STATUS_BUSY_RX_AACK = 0x11,
TRX_STATUS_BUSY_TX_ARET = 0x12,
TRX_STATUS_RX_AACK_ON = 0x16,
TRX_STATUS_TX_ARET_ON = 0x19,
TRX_STATUS_RX_ON_NOCLK = 0x1c,
TRX_STATUS_RX_AACK_ON_NOCLK = 0x1d,
TRX_STATUS_BUSY_RX_AACK_NOCLK = 0x1e,
TRX_STATUS_TRANSITION = 0x1f /* ..._IN_PROGRESS */
};
/* --- TRX_STATE ----------------------------------------------------------- */
#define TRAC_STATUS_SHIFT 5
#define TRAC_STATUS_MASK 7
enum {
TRAC_STATUS_SUCCESS = 0, /* reset default */
TRAC_STATUS_SUCCESS_DATA_PENDING = 1,
TRAC_STATUS_SUCCESS_WAIT_FOR_ACK = 2, /* 231 only */
TRAC_STATUS_CHANNEL_ACCESS_FAILURE = 3,
TRAC_STATUS_NO_ACK = 5,
TRAC_STATUS_INVALID = 7
};
#define TRX_CMD_SHIFT 0
#define TRX_CMD_MASK 0x1f
enum {
TRX_CMD_NOP = 0x00, /* reset default */
TRX_CMD_TX_START = 0x02,
TRX_CMD_FORCE_TRX_OFF = 0x03,
TRX_CMD_FORCE_PLL_ON = 0x04, /* 231 only */
TRX_CMD_RX_ON = 0x06,
TRX_CMD_TRX_OFF = 0x08,
TRX_CMD_PLL_ON = 0x09,
TRX_CMD_RX_AACK_ON = 0x16,
TRX_CMD_TX_ARET_ON = 0x19,
};
/* --- TRX_CTRL_0 ---------------------------------------------------------- */
#define PAD_IO_SHIFT 6
#define PAD_IO_MASK 3
enum {
PAD_IO_2mA, /* reset default */
PAD_IO_4mA,
PAD_IO_6mA,
PAD_IO_8mA
};
#define PAD_IO_CLKM_SHIFT 4
#define PAD_IO_CLKM_MASK 3
enum {
PAD_IO_CLKM_2mA,
PAD_IO_CLKM_4mA, /* reset default */
PAD_IO_CLKM_5mA,
PAD_IO_CLKM_8mA,
};
#define CLKM_SHA_SEL (1 << 3)
#define CLKM_CTRL_SHIFT 0
#define CLKM_CTRL_MASK 7
enum {
CLKM_CTRL_OFF = 0,
CLKM_CTRL_1MHz = 1, /* reset default */
CLKM_CTRL_2MHz = 2,
CLKM_CTRL_4MHz = 3,
CLKM_CTRL_8MHz = 4,
CLKM_CTRL_16MHz = 5
};
/* --- TRX_CTRL_1 (231 only) ----------------------------------------------- */
#define PA_EXT_EN (1 << 7)
#define IRQ_2_EXT_EN (1 << 6)
#define TX_AUTO_CRC_ON (1 << 5) /* 231 location */
#define RX_BL_CTRL (1 << 4)
#define SPI_CMD_MODE_SHIFT 2
#define SPI_CMD_MODE_MASK 3
enum {
SPI_CMD_MODE_EMPTY = 0, /* reset default */
SPI_CMD_MODE_TRX_STATUS = 1,
SPI_CMD_MODE_PHY_RSSI = 2,
SPI_CMD_MODE_IRQ_STATUS = 3,
};
#define IRQ_MASK_MODE (1 << 1)
#define IRQ_POLARITY (1 << 0)
/* --- PHY_TX_PWR ---------------------------------------------------------- */
#define TX_AUTO_CRC_ON_230 (1 << 7) /* 230 location */
#define PA_BUF_LT_SHIFT 6
#define PA_BUF_LT_MASK 3
#define PA_LT_SHIFT 4
#define PA_LT_MASK 3
#define TX_PWR_SHIFT 0
#define TX_PWR_MASK 0x0f
/* --- PHY_RSSI ------------------------------------------------------------ */
#define RX_CRC_VALID (1 << 7)
#define RND_VALUE_SHIFT 5 /* 231 only */
#define RND_VALUE_MASK 3
#define RSSI_SHIFT 0
#define RSSI_MASK 0x1f
/* --- PHY_CC_CCA ---------------------------------------------------------- */
#define CCA_REQUEST (1 << 7)
#define CCA_MODE_SHIFT 5
#define CCA_MODE_MASK 3
enum {
CCA_MODE_CARRIER_OR_ENERGY = 0, /* 231 only */
CCA_MODE_ENERGY = 1, /* reset default */
CCA_MODE_CARRIER = 2,
CCA_MODE_CARRIER_AND_ENERGY = 3
};
#define CHANNEL_SHIFT 0
#define CHANNEL_MASK 0x1f
/* --- CCA_THRES ----------------------------------------------------------- */
#define CCA_ED_THRES_SHIFT 0
#define CCA_ED_THRES_MASK 0x0f
/* --- RX_CTRL (231 only) -------------------------------------------------- */
#define PDT_THRES_SHIFT 0
#define PDT_THRES_MASK 0x0f
enum {
PDT_THRES_DEFAULT = 0x07, /* reset default */
PDT_THRES_DIVERSITY = 0x03,
};
/* --- TRX_CTRL_2 (231 only) ----------------------------------------------- */
#define RX_SAFE_MODE (1 << 7)
#define OQPSK_DATA_RATE_SHIFT 0
#define OQPSK_DATA_RATE_MASK 3
enum {
OQPSK_DATA_RATE_250 = 0, /* reset default */
OQPSK_DATA_RATE_500 = 1,
OQPSK_DATA_RATE_1000 = 2,
OQPSK_DATA_RATE_2000 = 3
};
/* --- ANT_DIV (231 only) -------------------------------------------------- */
#define ANT_SEL (1 << 7)
#define ANT_DIV_EN (1 << 3)
#define ANT_EXT_SW_EN (1 << 2)
#define ANT_CTRL_SHIFT 0
#define ANT_CTRL_MASK 3
enum {
ANT_CTRL_ANT_0 = 1,
ANT_CTRL_ANT_1 = 2,
ANT_CTRL_NODIV = 3, /* reset default */
};
/* --- IRQ_MASK/IRQ_STATUS ------------------------------------------------- */
enum {
IRQ_PLL_LOCK = 1 << 0,
IRQ_PLL_UNLOCK = 1 << 1,
IRQ_RX_START = 1 << 2,
IRQ_TRX_END = 1 << 3,
IRQ_CCA_ED_DONE = 1 << 4, /* 231 only */
IRQ_AMI = 1 << 5, /* 231 only */
IRQ_TRX_UR = 1 << 6,
IRQ_BAT_LOW = 1 << 7
};
/* --- VREG_CTRL ----------------------------------------------------------- */
#define AVREG_EXT (1 << 7)
#define AVDD_OK (1 << 6)
#define DVREG_EXT (1 << 3)
#define DVDD_OK (1 << 2)
/* --- BATMON -------------------------------------------------------------- */
#define BATMON_OK (1 << 5)
#define BATMON_HR (1 << 4)
#define BATMON_VTH_SHIFT 0
#define BATMON_VTH_MASK 0x0f
/* --- XOSC_CTRL ----------------------------------------------------------- */
#define XTAL_MODE_SHIFT 4
#define XTAL_MODE_MASK 0x0f
enum {
XTAL_MODE_OFF = 0x0, /* 230 only */
XTAL_MODE_EXT = 0x4,
XTAL_MODE_INT = 0xf /* reset default */
};
#define XTAL_TRIM_SHIFT 4
#define XTAL_TRIM_MASK 0x0f
/* --- RX_SYN (231 only) --------------------------------------------------- */
#define RX_PDT_DIS (1 << 7)
#define RX_PDT_LEVEL_SHIFT 0
#define RX_PDT_LEVEL_MASK 0xf
/* --- XAH_CTRL_1 (231 only) ----------------------------------------------- */
#define AACK_FLTR_RES_FT (1 << 5)
#define AACK_UPLD_RES_FT (1 << 4)
#define AACK_ACK_TIME (1 << 2)
#define AACK_PROM_MODE (1 << 1)
/* --- FTN_CTRL (231 only) ------------------------------------------------- */
#define FTN_START (1 << 7)
/* --- PLL_CF -------------------------------------------------------------- */
#define PLL_CF_START (1 << 7)
/* --- PLL_DCU ------------------------------------------------------------- */
#define PLL_DCU_START (1 << 7)
/* --- XAH_CTRL_0 (XAH_CTRL in 230) ---------------------------------------- */
#define MAX_FRAME_RETRIES_SHIFT 4
#define MAX_FRAME_RETRIES_MASK 0x0f
#define MAX_CSMA_RETRIES_SHIFT 1
#define MAX_CSMA_RETRIES_MASK 0x07
#define SLOTTED_OPERATION (1 << 0) /* 231 only */
/* --- CSMA_SEED_1 --------------------------------------------------------- */
#define MIN_BE_SHIFT_230 6 /* 230 location */
#define MIN_BE_MASK_230 3
#define AACK_FVN_MODE_SHIFT 6 /* 231 only */
#define AACK_FVN_MODE_MASK 3
enum {
AACK_FVN_MODE_0 = 0,
AACK_FVN_MODE_01 = 1, /* reset default */
AACK_FVN_MODE_012 = 2,
AACK_FVN_MODE_ANY = 3
};
#define AACK_SET_PD (1 << 5)
#define AACK_DIS_ACK (1 << 4) /* 231 only */
#define I_AM_COORD (1 << 3)
#define CSMA_SEED_1_SHIFT 0
#define CSMA_SEED_1_MASK 7
/* --- CSMA_BE ------------------------------------------------------------- */
#define MAX_BE_SHIFT 4
#define MAX_BE_MASK 0x0f
#define MIN_BE_SHIFT 0 /* 231 location */
#define MIN_BE_MASK 0x0f
/* --- REG_CONT_TX_0 ------------------------------------------------------- */
#define CONT_TX_MAGIC 0x0f
/* --- REG_CONT_TX_1 (230 only) -------------------------------------------- */
#define CONT_TX_MOD 0x00 /* modulated */
#define CONT_TX_M2M 0x10 /* f_CH-2 MHz */
#define CONT_TX_M500K 0x80 /* f_CH-0.5 MHz */
#define CONT_TX_P500K 0xc0 /* f_CH+0.5 MHz */
#endif /* !AT86RF230_H */