mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-08-27 06:17:08 +03:00
- include/atusb/ep0.h (enum atspi_requests), ep0.c (my_setup): added new "HardMAC" requests ATUSB_RX_MODE and ATUSB_TX - mac.h, mac.c: basic "HardMAC" procedure - board_app.c (INT0_vect): call MAC-specific interrupt handler if provided - Makefile (OBJS): added mac.o
155 lines
2.8 KiB
C
155 lines
2.8 KiB
C
/*
|
|
* fw/mac.c - HardMAC functions
|
|
*
|
|
* Written 2011 by Werner Almesberger
|
|
* Copyright 2011 Werner Almesberger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <stddef.h>
|
|
#include <stdint.h>
|
|
|
|
#include "usb.h"
|
|
|
|
#include "at86rf230.h"
|
|
#include "spi.h"
|
|
#include "mac.h"
|
|
|
|
|
|
void (*mac_irq)(void) = NULL;
|
|
|
|
|
|
static uint8_t rx_buf[MAX_PSDU+2]; /* PHDR+payload+LQ */
|
|
static uint8_t tx_buf[MAX_PSDU];
|
|
static uint8_t tx_size = 0;
|
|
static int txing = 0;
|
|
|
|
|
|
static uint8_t reg_read(uint8_t reg)
|
|
{
|
|
uint8_t value;
|
|
|
|
spi_begin();
|
|
spi_send(AT86RF230_REG_READ | reg);
|
|
value= spi_recv();
|
|
spi_end();
|
|
|
|
return value;
|
|
}
|
|
|
|
|
|
static void reg_write(uint8_t reg, uint8_t value)
|
|
{
|
|
spi_begin();
|
|
spi_send(AT86RF230_REG_WRITE | reg);
|
|
spi_send(value);
|
|
spi_end();
|
|
}
|
|
|
|
|
|
static void handle_irq(void)
|
|
{
|
|
uint8_t irq;
|
|
uint8_t size, i;
|
|
|
|
irq = reg_read(REG_IRQ_STATUS);
|
|
if (!(irq & IRQ_TRX_END))
|
|
return;
|
|
|
|
/*
|
|
* @@@ we probably also have to handle at least IRQ_PLL_UNLOCK, because
|
|
* a PLL unlock should cause a transition out of BUSY_TX without
|
|
* TRX_END.
|
|
*/
|
|
if (txing) {
|
|
txing = 0;
|
|
return;
|
|
}
|
|
|
|
/* unlikely */
|
|
if (eps[1].state != EP_IDLE)
|
|
return;
|
|
|
|
spi_begin();
|
|
spi_send(AT86RF230_BUF_READ);
|
|
size = spi_recv();
|
|
if (size & 0x80) {
|
|
spi_end();
|
|
return;
|
|
}
|
|
|
|
rx_buf[0] = size;
|
|
for (i = 0; i != size+1; i++)
|
|
rx_buf[i+1] = spi_recv();
|
|
spi_end();
|
|
usb_send(&eps[1], rx_buf, size+2, NULL, NULL);
|
|
}
|
|
|
|
|
|
int mac_rx(int on)
|
|
{
|
|
if (on) {
|
|
mac_irq = handle_irq;
|
|
reg_read(REG_IRQ_STATUS);
|
|
reg_write(REG_TRX_STATE, TRX_CMD_RX_ON);
|
|
} else {
|
|
mac_irq = NULL;
|
|
reg_write(REG_TRX_STATE, TRX_CMD_FORCE_TRX_OFF);
|
|
txing = 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void do_tx(void *user)
|
|
{
|
|
uint8_t status;
|
|
uint8_t i;
|
|
|
|
do status = reg_read(REG_TRX_STATUS) & TRX_STATUS_MASK;
|
|
while (status != TRX_STATUS_RX_ON && status != TRX_STATUS_RX_AACK_ON);
|
|
|
|
/*
|
|
* We use TRX_CMD_FORCE_PLL_ON instead of TRX_CMD_PLL_ON because a new
|
|
* reception may have begun while we were still working on the previous
|
|
* one.
|
|
*/
|
|
reg_write(REG_TRX_STATE, TRX_CMD_FORCE_PLL_ON);
|
|
|
|
handle_irq();
|
|
|
|
spi_begin();
|
|
spi_send(AT86RF230_BUF_WRITE);
|
|
spi_send(tx_size);
|
|
for (i = 0; i != tx_size; i++)
|
|
spi_send(tx_buf[i]);
|
|
spi_end();
|
|
|
|
reg_write(REG_TRX_STATE, TRX_CMD_TX_START);
|
|
|
|
txing = 1;
|
|
|
|
/*
|
|
* Wait until we reach BUSY_TX, so that we command the transition to
|
|
* RX_ON which will be executed upon TX completion.
|
|
*/
|
|
while ((reg_read(REG_TRX_STATUS) & TRX_STATUS_MASK) ==
|
|
TRX_STATUS_TRANSITION);
|
|
reg_write(REG_TRX_STATE, TRX_CMD_RX_ON);
|
|
}
|
|
|
|
|
|
int mac_tx(uint16_t flags, uint16_t len)
|
|
{
|
|
if (len > MAX_PSDU)
|
|
return 0;
|
|
tx_size = len;
|
|
usb_recv(&eps[0], tx_buf, len, do_tx, NULL);
|
|
return 1;
|
|
|
|
}
|