mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-12-23 20:35:30 +02:00
4244af265c
The transceiver reset takes quite a while. It seems that also going into sleep mode has the effect of stopping cw test mode and it's much faster. This has only been tried on the AT86RF231. For AT86RF230, we therefore still use the reset. Performance improvement: Measurement: atrf-path sweep time in GUI mode, averaging over 10 samples. Running on PC with remote ATBEN transceivers. before 7.36-7.68 s after 2.08 s (27-28% of previous time)
136 lines
3.3 KiB
C
136 lines
3.3 KiB
C
/*
|
|
* lib/cwtest.c - Set up AT86RF230/231 constant wave test mode
|
|
*
|
|
* Written 2010-2011 by Werner Almesberger
|
|
* Copyright 2010-2011 Werner Almesberger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include "at86rf230.h"
|
|
#include "atrf.h"
|
|
#include "misctxrx.h"
|
|
|
|
#include "cwtest.h"
|
|
|
|
|
|
static void enter_test_mode_230(struct atrf_dsc *dsc, uint8_t cont_tx)
|
|
{
|
|
atrf_buf_write(dsc, "", 1);
|
|
atrf_reg_write(dsc, REG_CONT_TX_0, CONT_TX_MAGIC);
|
|
atrf_reg_write(dsc, REG_CONT_TX_1, cont_tx);
|
|
|
|
if (!atrf_test_mode(dsc)) {
|
|
atrf_reset_rf(dsc);
|
|
fprintf(stderr, "device does not support test mode\n");
|
|
exit(1);
|
|
}
|
|
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_PLL_ON);
|
|
wait_for_interrupt(dsc, IRQ_PLL_LOCK, IRQ_PLL_LOCK, 10, 20);
|
|
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_TX_START);
|
|
}
|
|
|
|
|
|
static void enter_test_mode_231(struct atrf_dsc *dsc, uint8_t cont_tx)
|
|
{
|
|
uint8_t buf[127];
|
|
uint8_t status;
|
|
|
|
switch (cont_tx) {
|
|
case CONT_TX_M2M:
|
|
fprintf(stderr,
|
|
"-2 MHz mode is not supported by the AT86RF231\n");
|
|
atrf_close(dsc);
|
|
exit(1);
|
|
case CONT_TX_M500K:
|
|
memset(buf, 0, sizeof(buf));
|
|
break;
|
|
case CONT_TX_P500K:
|
|
memset(buf, 0xff, sizeof(buf));
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
|
|
atrf_reg_write(dsc, REG_IRQ_MASK, IRQ_PLL_LOCK); /* 2 */
|
|
atrf_reg_write(dsc, REG_TRX_CTRL_1, 0); /* 3 */
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_FORCE_TRX_OFF); /* 4 */
|
|
/* deleted step 5 - we don't need to enable CLKM */
|
|
|
|
status = atrf_reg_read(dsc, REG_TRX_STATUS) & TRX_STATUS_MASK; /* 8 */
|
|
if (status != TRX_STATUS_TRX_OFF) {
|
|
fprintf(stderr, "expected status 0x%02x, got 0x%02x\n",
|
|
TRX_STATUS_TRX_OFF, status);
|
|
exit(1);
|
|
}
|
|
|
|
atrf_reg_write(dsc, REG_CONT_TX_0, CONT_TX_MAGIC); /* 9 */
|
|
atrf_reg_write(dsc, REG_TRX_CTRL_2, OQPSK_DATA_RATE_2000); /*10 */
|
|
atrf_reg_write(dsc, REG_RX_CTRL, 0xa7); /*11 */
|
|
|
|
atrf_buf_write(dsc, buf, sizeof(buf)); /*12 */
|
|
|
|
atrf_reg_write(dsc, REG_PART_NUM, 0x54); /*13 */
|
|
atrf_reg_write(dsc, REG_PART_NUM, 0x46); /*14 */
|
|
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_PLL_ON); /*15 */
|
|
wait_for_interrupt(dsc, IRQ_PLL_LOCK, IRQ_PLL_LOCK, 10, 0); /*16 */
|
|
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_TX_START); /*17 */
|
|
}
|
|
|
|
|
|
void cw_test_begin(struct atrf_dsc *dsc, uint8_t cont_tx)
|
|
{
|
|
switch (atrf_identify(dsc)) {
|
|
case artf_at86rf230:
|
|
enter_test_mode_230(dsc, cont_tx);
|
|
break;
|
|
case artf_at86rf231:
|
|
enter_test_mode_231(dsc, cont_tx);
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
|
|
void cw_test_end(struct atrf_dsc *dsc)
|
|
{
|
|
if (atrf_identify(dsc) == artf_at86rf231)
|
|
atrf_reg_write(dsc, REG_PART_NUM, 0);
|
|
|
|
atrf_reg_write(dsc, REG_TRX_STATE, TRX_CMD_FORCE_TRX_OFF);
|
|
|
|
/*
|
|
* atrf_reset_rf can take a long time. I appears that at least the
|
|
* AT86RF231 also exits test mode if we send it to sleep for a
|
|
* moment.
|
|
*/
|
|
switch (atrf_identify(dsc)) {
|
|
case artf_at86rf230:
|
|
atrf_reset_rf(dsc);
|
|
break;
|
|
case artf_at86rf231:
|
|
usleep(2); /* table 7-1: tTR12(typ) = 1 us */
|
|
atrf_slp_tr(dsc, 1);
|
|
usleep(10); /* table 7-1: tTR3(typ) doesn't really apply */
|
|
atrf_slp_tr(dsc, 0);
|
|
usleep(500); /* table 7-1: tTR2(typ) = 380 */
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
}
|