1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-04 23:59:23 +02:00
ben-wpan/atben
Werner Almesberger bb2894f293 atben: straightened traces inside 8:10 card slot to reduce risk of shorts
- atben.brd: make traces inside 8:10 card slot go straight as long as
  possible, to avoid shorts with exposed contacts
- atben.brd: removed "IEEE 802.15.4" and "CC-BY-SA" from copper layer
- atben.brd: reduced date code to two-digit year
- atben.brd: bumped version to 20110207
2011-02-07 07:41:26 -03:00
..
cam atben/cam/mkmk: updated for latest board parameters 2011-01-28 03:48:03 -03:00
case great atusd -> atben renaming: changed the directory name 2011-01-17 10:53:55 -03:00
sim great atusd -> atben renaming: changed the directory name 2011-01-17 10:53:55 -03:00
tests great atusd -> atben renaming: changed the directory name 2011-01-17 10:53:55 -03:00
atben.brd atben: straightened traces inside 8:10 card slot to reduce risk of shorts 2011-02-07 07:41:26 -03:00
atben.cmp atben: set AT86F231 footprint to QFN32-VHHD-6 2011-01-23 01:15:18 -03:00
atben.pro atben, atusb: set solder mask and solder paste clearances to NXP's values 2011-01-23 11:43:08 -03:00
atben.sch atben.sch: corrected typo "sLP_TR" 2011-01-28 02:08:36 -03:00
ERRATA great atusd -> atben renaming: changed the directory name 2011-01-17 10:53:55 -03:00
Makefile atben/Makefile (clean), atusb/Makefile (clean): remove Gerbers 2011-01-17 22:40:15 -03:00
MAP great atusd -> atben renaming: changed the directory name 2011-01-17 10:53:55 -03:00
README atben/README: manufacturing notes 2011-01-17 22:30:22 -03:00

PCB manufacturing:

- do not print PCB edges on front/back copper
- do not print component values on silk screen
- note that the transceiver is "upside down"
- the center (!) of the board edge line marks the true board edge, e.g.,

                             Edge line (5 mil)
                        =======
         ------- - - - - - ----------
               |           |
   PCB outside |           | PCB inside
               |           |
         ------- - - - - - ----------
                     |
               Volume removed when cutting
               (width depends on tool used)