mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-08-27 23:04:16 +03:00
- include/atrf.h (atrf_slp_tr), lib/atrf.c (atrf_slp_tr): added pulse argument - atrf-proxy/PROTOCOL, atrf-proxy/atrf-proxy.c (cmd_two, cmd_more): added second argument to SLP_TR command - atrf-xtal/atben.c (atben_sample), lib/cwtest.c (cw_test_end): updated for API change - lib/driver.h (struct atrf_driver): added "pulse" argument to slp_tr - lib/atben.c (atben_slp_tr), lib/atnet.c (atnet_slp_tr): added support for pulse mode
416 lines
7.8 KiB
C
416 lines
7.8 KiB
C
/*
|
|
* lib/atben.c - ATRF access functions library (Ben 8:10 card version)
|
|
*
|
|
* Written 2010-2011 by Werner Almesberger
|
|
* Copyright 2010-2011 Werner Almesberger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include <unistd.h>
|
|
#include <fcntl.h>
|
|
#include <sys/mman.h>
|
|
|
|
#include "at86rf230.h"
|
|
#include "driver.h"
|
|
|
|
|
|
enum {
|
|
VDD_OFF = 1 << 2, /* VDD disable, PD02 */
|
|
MOSI = 1 << 8, /* CMD, PD08 */
|
|
#ifdef OLD
|
|
CLK = 1 << 9, /* CLK, PD09 */
|
|
#else
|
|
SLP_TR = 1 << 9, /* CLK, PD09 */
|
|
#endif
|
|
MISO = 1 << 10, /* DAT0, PD10 */
|
|
SCLK = 1 << 11, /* DAT1, PD11 */
|
|
IRQ = 1 << 12, /* DAT2, PD12 */
|
|
nSEL = 1 << 13, /* DAT3/CD, PD13 */
|
|
};
|
|
|
|
|
|
#define SOC_BASE 0x10000000
|
|
|
|
#define REG(n) (*(volatile uint32_t *) (dsc->mem+(n)))
|
|
|
|
#define CGU(n) REG(0x00000+(n))
|
|
#define GPIO(n) REG(0x10000+(n))
|
|
#define MSC(n) REG(0x21000+(n))
|
|
|
|
#define PDPIN GPIO(0x300) /* port D pin level */
|
|
#define PDDATS GPIO(0x314) /* port D data set */
|
|
#define PDDATC GPIO(0x318) /* port D data clear */
|
|
#define PDFUNS GPIO(0x344) /* port D function set */
|
|
#define PDFUNC GPIO(0x348) /* port D function clear */
|
|
#define PDDIRS GPIO(0x364) /* port D direction set */
|
|
#define PDDIRC GPIO(0x368) /* port D direction clear */
|
|
|
|
#define MSC_STRPCL MSC(0x00) /* Start/stop MMC/SD clock */
|
|
#define MSC_CLKRT MSC(0x08) /* MSC Clock Rate */
|
|
|
|
#define CLKGR CGU(0x0020) /* Clock Gate */
|
|
#define MSCCDR CGU(0x0068) /* MSC device clock divider */
|
|
|
|
|
|
#define PAGE_SIZE 4096
|
|
|
|
|
|
struct atben_dsc {
|
|
int fd;
|
|
void *mem;
|
|
};
|
|
|
|
|
|
/* ----- Reset functions --------------------------------------------------- */
|
|
|
|
|
|
static void wait_for_power(void)
|
|
{
|
|
/*
|
|
* Give power time to stabilize and the chip time to reset.
|
|
* Power takes about 2 ms to ramp up. We wait 10 ms to be sure.
|
|
*/
|
|
usleep(10*1000);
|
|
}
|
|
|
|
|
|
static void atben_cycle(struct atben_dsc *dsc)
|
|
{
|
|
/* stop the MMC bus clock */
|
|
MSC_STRPCL = 1;
|
|
|
|
/* drive all outputs low (including the MMC bus clock) */
|
|
#ifdef OLD
|
|
PDDATC = MOSI | CLK | SCLK | nSEL;
|
|
|
|
/* make the MMC bus clock a regular output */
|
|
PDFUNC = CLK;
|
|
#else
|
|
PDDATC = MOSI | SLP_TR | SCLK | nSEL;
|
|
PDFUNC = SLP_TR;
|
|
#endif
|
|
|
|
/* cut the power */
|
|
PDDATS = VDD_OFF;
|
|
|
|
/* Power drains within about 20 ms. Wait 100 ms to be sure. */
|
|
usleep(100*1000);
|
|
|
|
/* drive MOSI and nSS high */
|
|
PDDATS = MOSI | nSEL;
|
|
|
|
/* precharge the capacitors to avoid current surge */
|
|
wait_for_power();
|
|
|
|
#ifdef OLD
|
|
|
|
/* return the bus clock output to the MMC controller */
|
|
PDFUNS = CLK;
|
|
|
|
/* start MMC clock output */
|
|
MSC_STRPCL = 2;
|
|
#endif
|
|
|
|
/* supply power */
|
|
PDDATC = VDD_OFF;
|
|
|
|
wait_for_power();
|
|
}
|
|
|
|
|
|
/* ----- Low-level SPI operations ------------------------------------------ */
|
|
|
|
|
|
static void spi_begin(struct atben_dsc *dsc)
|
|
{
|
|
PDDATC = nSEL;
|
|
}
|
|
|
|
|
|
static void spi_end(struct atben_dsc *dsc)
|
|
{
|
|
PDDATS = nSEL;
|
|
}
|
|
|
|
|
|
static void spi_send(struct atben_dsc *dsc, uint8_t v)
|
|
{
|
|
uint8_t mask;
|
|
|
|
for (mask = 0x80; mask; mask >>= 1) {
|
|
if (v & mask)
|
|
PDDATS = MOSI;
|
|
else
|
|
PDDATC = MOSI;
|
|
PDDATS = SCLK;
|
|
PDDATC = SCLK;
|
|
}
|
|
}
|
|
|
|
|
|
static uint8_t spi_recv(struct atben_dsc *dsc)
|
|
{
|
|
uint8_t res = 0;
|
|
uint8_t mask;
|
|
|
|
for (mask = 0x80; mask; mask >>= 1) {
|
|
if (PDPIN & MISO)
|
|
res |= mask;
|
|
PDDATS = SCLK;
|
|
PDDATC = SCLK;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
|
|
/* ----- Driver operations ------------------------------------------------- */
|
|
|
|
|
|
static void atben_reset_rf(void *handle)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
atben_cycle(dsc);
|
|
wait_for_power();
|
|
}
|
|
|
|
|
|
static void *atben_open(const char *arg)
|
|
{
|
|
struct atben_dsc *dsc;
|
|
|
|
dsc = malloc(sizeof(*dsc));
|
|
if (!dsc) {
|
|
perror("malloc");
|
|
exit(1);
|
|
}
|
|
|
|
dsc->fd = open("/dev/mem", O_RDWR | O_SYNC);
|
|
if (dsc->fd < 0) {
|
|
perror("/dev/mem");
|
|
exit(1);
|
|
}
|
|
dsc->mem = mmap(NULL, PAGE_SIZE*3*16, PROT_READ | PROT_WRITE,
|
|
MAP_SHARED, dsc->fd, SOC_BASE);
|
|
if (dsc->mem == MAP_FAILED) {
|
|
perror("mmap");
|
|
exit(1);
|
|
}
|
|
|
|
/* set the output levels */
|
|
PDDATS = nSEL | VDD_OFF;
|
|
PDDATC = SCLK;
|
|
|
|
/* take the GPIOs away from the MMC controller */
|
|
#ifdef OLD
|
|
PDFUNC = MOSI | MISO | SCLK | IRQ | nSEL;
|
|
PDFUNS = CLK;
|
|
#else
|
|
PDFUNC = MOSI | MISO | SCLK | IRQ | nSEL | SLP_TR;
|
|
#endif
|
|
|
|
/* set the pin directions */
|
|
PDDIRC = MISO | IRQ;
|
|
#ifdef OLD
|
|
PDDIRS = MOSI | CLK | SCLK | nSEL;
|
|
#else
|
|
PDDIRS = MOSI | SLP_TR | SCLK | nSEL;
|
|
#endif
|
|
|
|
/* let capacitors precharge */
|
|
wait_for_power();
|
|
|
|
/* enable power */
|
|
PDDATC = VDD_OFF;
|
|
|
|
#ifdef OLD
|
|
/* set the MSC clock to 336 MHz / 21 = 16 MHz */
|
|
MSCCDR = 20;
|
|
/*
|
|
* Enable the MSC clock. We need to do this before accessing any
|
|
* registers of the MSC block !
|
|
*/
|
|
CLKGR &= ~(1 << 7);
|
|
/* bus clock = MSC clock / 1 */
|
|
MSC_CLKRT = 0;
|
|
/* start MMC clock output */
|
|
MSC_STRPCL = 2;
|
|
#endif
|
|
|
|
wait_for_power();
|
|
atben_reset_rf(dsc);
|
|
|
|
return dsc;
|
|
}
|
|
|
|
|
|
static void atben_close(void *arg)
|
|
{
|
|
struct atben_dsc *dsc = arg;
|
|
|
|
/* stop the MMC bus clock */
|
|
MSC_STRPCL = 1;
|
|
|
|
/* cut the power */
|
|
PDDATS = VDD_OFF;
|
|
|
|
/* make all MMC pins inputs */
|
|
#ifdef OLD
|
|
PDDIRC = MOSI | MISO | CLK | SCLK | IRQ | nSEL;
|
|
#else
|
|
PDDIRC = MOSI | MISO | SLP_TR | SCLK | IRQ | nSEL;
|
|
#endif
|
|
}
|
|
|
|
|
|
static void atben_reg_write(void *handle, uint8_t reg, uint8_t v)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_REG_WRITE | reg);
|
|
spi_send(dsc, v);
|
|
spi_end(dsc);
|
|
}
|
|
|
|
|
|
static uint8_t atben_reg_read(void *handle, uint8_t reg)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
uint8_t res;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_REG_READ | reg);
|
|
res = spi_recv(dsc);
|
|
spi_end(dsc);
|
|
return res;
|
|
}
|
|
|
|
|
|
static void atben_buf_write(void *handle, const void *buf, int size)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_BUF_WRITE);
|
|
spi_send(dsc, size);
|
|
while (size--)
|
|
spi_send(dsc, *(uint8_t *) buf++);
|
|
spi_end(dsc);
|
|
}
|
|
|
|
|
|
static int atben_buf_read(void *handle, void *buf, int size)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
uint8_t len, i;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_BUF_READ);
|
|
len = spi_recv(dsc);
|
|
len++; /* LQI */
|
|
if (len > size)
|
|
len = size;
|
|
for (i = 0; i != len; i++)
|
|
*(uint8_t *) buf++ = spi_recv(dsc);
|
|
spi_end(dsc);
|
|
return len;
|
|
}
|
|
|
|
|
|
static void atben_sram_write(void *handle, uint8_t addr, uint8_t v)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_SRAM_WRITE);
|
|
spi_send(dsc, addr);
|
|
spi_send(dsc, v);
|
|
spi_end(dsc);
|
|
}
|
|
|
|
|
|
static uint8_t atben_sram_read(void *handle, uint8_t addr)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
uint8_t res;
|
|
|
|
spi_begin(dsc);
|
|
spi_send(dsc, AT86RF230_SRAM_READ);
|
|
spi_send(dsc, addr);
|
|
res = spi_recv(dsc);
|
|
spi_end(dsc);
|
|
return res;
|
|
}
|
|
|
|
|
|
/* ----- SLP_TR ------------------------------------------------------------ */
|
|
|
|
|
|
static void atben_slp_tr(void *handle, int on, int pulse)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
if (on)
|
|
PDDATS = SLP_TR;
|
|
else
|
|
PDDATC = SLP_TR;
|
|
if (!pulse)
|
|
return;
|
|
if (on)
|
|
PDDATC = SLP_TR;
|
|
else
|
|
PDDATS = SLP_TR;
|
|
}
|
|
|
|
|
|
/* ----- RF interrupt ------------------------------------------------------ */
|
|
|
|
|
|
static int atben_interrupt(void *handle)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
return !!(PDPIN & IRQ);
|
|
}
|
|
|
|
|
|
/* ----- Driver-specific hacks --------------------------------------------- */
|
|
|
|
|
|
void *atben_regs(void *handle)
|
|
{
|
|
struct atben_dsc *dsc = handle;
|
|
|
|
return dsc->mem;
|
|
}
|
|
|
|
|
|
/* ----- Driver interface -------------------------------------------------- */
|
|
|
|
|
|
struct atrf_driver atben_driver = {
|
|
.name = "ben",
|
|
.open = atben_open,
|
|
.close = atben_close,
|
|
.reset = NULL,
|
|
.reset_rf = atben_reset_rf,
|
|
.test_mode = NULL,
|
|
.slp_tr = atben_slp_tr,
|
|
.reg_write = atben_reg_write,
|
|
.reg_read = atben_reg_read,
|
|
.buf_write = atben_buf_write,
|
|
.buf_read = atben_buf_read,
|
|
.sram_write = atben_sram_write,
|
|
.sram_read = atben_sram_read,
|
|
.interrupt = atben_interrupt,
|
|
};
|