mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-11-27 03:32:49 +02:00
5129029d3b
This patch adds support for the rzusbstick for the atusb firmware. More detailed information about this usb stick: http://www.atmel.com/tools/rzusbstick.aspx Original I have the rzraven kit: http://www.atmel.com/tools/rzraven.aspx Which comes with a special cable and avr dragon programmer. You need some programmer and wires to the programmers pins. To lookup how to connect the programmer to the rzusbstick pinout, see: http://www.atmel.com/Images/doc8117.pdf page 22 (schematics of the rzusbstick). Difference between atusb and rzusbstick(rzusb) is mainly the at86rf231 vs at86rf230 one. The rzusb contains the at86rf230 which is a little bit hard to deal with it (and has a huge errata inside the datasheet). Nevertheless with small schanges the atusb firmware can run now on the rzusb. The rzusb contains also a bigger mcu, so we can maybe cache more pdus for receive handling. To compile the rzusb firmware call: make NAME=rzusb this will generate the rzusb.bin then call the programmer (in my case avrdude): avrdude -P usb -c dragon_jtag -p usb1287 -U flash:w:rzusb.bin NOTE: currently there is no chance (I suppose) to ensure that the atusb receive the correct firmware, so don't try to flash the atusb with the rzusb firmware! Also the vendor and product id is the same. This currently a RFC, it's a quick hack and I think we should update more the documentation to support the rzusb. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Cc: Werner Almesberger <werner@almesberger.net>
53 lines
903 B
C
53 lines
903 B
C
/*
|
|
* fw/atusb.c - ATUSB initialization and main loop
|
|
*
|
|
* Written 2008-2011 by Werner Almesberger
|
|
* Copyright 2008-2011 Werner Almesberger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/sleep.h>
|
|
#include <avr/interrupt.h>
|
|
|
|
#include "usb.h"
|
|
|
|
#include "board.h"
|
|
#include "sernum.h"
|
|
#include "spi.h"
|
|
#include "atusb/ep0.h"
|
|
|
|
|
|
int main(void)
|
|
{
|
|
board_init();
|
|
board_app_init();
|
|
reset_rf();
|
|
|
|
user_get_descriptor = sernum_get_descr;
|
|
|
|
/* now we should be at 8 MHz */
|
|
|
|
usb_init();
|
|
ep0_init();
|
|
#ifdef ATUSB
|
|
timer_init();
|
|
|
|
/* move interrupt vectors to 0 */
|
|
MCUCR = 1 << IVCE;
|
|
MCUCR = 0;
|
|
#endif
|
|
|
|
sei();
|
|
|
|
while (1)
|
|
sleep_mode();
|
|
}
|