1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-18 04:40:38 +02:00
ben-wpan/modules/INFO

69 lines
1.8 KiB
Plaintext

#
# Tags:
#
# F Footprint name (must be first)
# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
#
# TI meandered inverted F antenna
F: meander
N: AN043
# Mini-USB B receptable (SMT; almost generic)
F: mini_usb_b
# Common 4-pin crystal SMT package (pins 1 and 4 are on a short side, pin
# numbering is counter-clockwise)
F: xtal-4
N: nx3225sa
# 0805 package with six pads
F: 0805-6
#
# MMCX board-edge (SMT) female jack
#
# Design based on Molex 73415-0961, This is also compatible with:
#
# Tyco 1408152-1
# Emerson 135-3711-801
# Molex 73415-1261
# Amphenol 262107
#
# Note: footprint changes with PCB thickness !
#
# Known bugs:
# - keepout area marker should be on comment layer
# - pin 2 should be off-center and extend such that proper trace can be
# connected directly
#
F: mmcx-f-edge
N: 73415-0961
# USB A plug for SMT
#
# Note: the signal pads are enlarged by 0.2 mm and their center is shifted by
# 0.1 mm with respect to the reference.
#
# According to the data sheet, the leads terminate at (2.00+/-0.10 mm)/2+
# 2.48 mm = 3.48+/-0.10 mm from the center. The reference footprint puts the
# edge of the pads at (2.00+/-0.10 mm)/2+2.6 mm = 3.6 mm+/-0.10 mm, so the
# maximum lead end could be at 3.58 mm while the minimum pad edge could be at
# 3.5 mm.
#
# Assuming that the pad is intended to extend a bit beyond the lead, we need
# to add 0.2 mm to compensate for these tolerances. (The pad tolerance may not
# be intended to be used this way, however, we still have to consider small
# errors in registration, which also amount to about 0.1 mm, so the calculation
# remains valid.)
#
F: usb_a_plug_smt
# SOT-323 package with counter-clockweise or clockwise pin assignment
F: sot-323
N: mmst3904
# U.FL/Micro Coax/... receptacle
F: u-fl-receptacle
N: u.fl-receptacle