1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-05 11:13:09 +02:00
ben-wpan/modules/INFO
Werner Almesberger f73f0a9481 Added Molex 0480371000 USB A plug (SMT)
- AUTHORS, components/INFO, components/usb_a_plug.lib,
  components/usb_a_plug.dcm: added symbol for USB A plug
- AUTHORS, modules/INFO, modules/usb_a_plug_smt.fpd: added footprint for
  USB A plug
- BOOKSHELF: added Molex 0480371000 USB A plug for SMT
- AUTHORS: corrected type in file extension of modules/xtal-4.fpd (was .fpg)
2010-10-25 03:07:03 -03:00

70 lines
1.7 KiB
Plaintext

#
# Tags:
#
# F Footprint name (must be first)
# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
#
# TI meandered inverted F antenna
F: meander
N: AN043
# Mini-USB B receptable (SMT; almost generic)
F: mini_usb_b
# "Generic" simple QFN
F: qfn
#
# The information for these packages comes from various sources:
#
# - the C8051F326 data sheet, for the QFN28 footprint (N: mcu)
# - the AT86F326 data sheet, for the QFN32 package dimensions (N: txrx)
# - Atmel's general recommendations for QFN land patterns (N: atmel-qfn)
# - NXP's SOT617-1 and SOT617-3, for package and land pattern:
# http://www.nxp.com/package/SOT617-1.html
# http://www.nxp.com/package/SOT617-3.html
#
# Known bugs:
#
# - we should distribute the solder paste in an array of small
# squares instead of just covering the whole center pad.
# - really ought to merge all the various QFN definitions (we have more
# over at gta02-core) into a single QFN file with a big mean table of
# everything
#
N: sot617-3-lp
# "Generic" simple QFP (for now, just for Silabs' C8051F320)
F: qfp
# Common 4-pin crystal SMT package (pins 1 and 4 are on a short side, pin
# numbering is counter-clockwise)
F: xtal-4
N: nx3225sa
# 0805 package with six pads
F: 0805-6
#
# MMCX board-edge (SMT) female jack
#
# Design based on Molex 73415-0961, This is also compatible with:
#
# Tyco 1408152-1
# Emerson 135-3711-801
# Molex 73415-1261
# Amphenol 262107
#
# Note: footprint changes with PCB thickness !
#
# Known bugs:
# - keepout area marker should be on comment layer
# - pin 2 should be off-center and extend such that proper trace can be
# connected directly
#
F: mmcx-f-edge
N: 73415-0961
# USB A plug for SMT
F: usb_a_plug_smt