Juan Brinez
1dace079fc
Fixing someting Erc errors, view the Qi_AVT2.erc file.
2009-09-14 22:57:42 -05:00
carlos
9696407baf
Route SD CARD lines
2009-09-14 22:08:51 -05:00
Juan Brinez
197878d063
Fixing J3 footprint
2009-09-14 20:40:31 -05:00
carlos
14661f74af
Routing ...
2009-09-14 20:37:02 -05:00
carlos
2e80b02c4a
Inital route, SDRAM, NAND, LCD
2009-09-14 18:13:36 -05:00
carlos
a951b8c64f
Start routing. NAND, SDRAM memories, LCD
2009-09-14 17:31:13 -05:00
Juan Brinez
65c246ef98
Edited TPM58 (keys) and TPSR15 (reset) footprints.
2009-09-13 20:18:21 -05:00
Juan Brinez
893608943a
Resized sheet, changed the relative coordinates origin and rebuilded the board conectivity.
2009-09-13 14:27:26 -05:00
Carlos Camargo
c79740797e
Edited pcb, removed extra footprints, reorganized silks texts and more.
2009-09-13 10:11:12 -05:00
juan64bits
d65b8da7fd
New library component. Boot Switch and holes.
2009-09-13 09:55:49 -05:00
carlos
2ca7bcbf32
Remove unnecessary Test Points, Adding usb switch connections in .brd file
2009-09-12 22:21:09 -05:00
carlos
0fdac0d262
Remove unnecessary Test Points, Adding usb switch connections
2009-09-12 22:16:53 -05:00
carlos
e060183dc4
Resize and move silkscreen text
2009-09-11 19:41:56 -05:00
carlos
43b50c5799
Reduce and move some silsckreen text,
2009-09-11 19:39:35 -05:00
carlos
f9dc0a01bc
initial import
2009-09-04 21:51:48 -05:00
Adam Wang
f3a4240b84
2009/08/31 adam
...
1, <sch> add SW1 to configure boot selection from NAND or USB
2, <sch> change U6 pin definition pin1 = GND, pin2= OUT
3, <bom> delete R9 to be NC
4, <bom> add SW1 ESP40XX
2009-09-01 00:05:41 +08:00
Adam Wang
452130063a
minor gitignore fix
2009-08-31 11:39:46 +08:00
Adam Wang
014e1d7c08
1, Updated BOM / Schematic:
...
a) Added D6/MSCD104 for raising efficiency
b) Changed C57 to 0.1uF/16V, C49 to 1uF/16V, TP31 to CKE
c) Added R46/10k/5%,
d) Added TP85 for +5V USB host voltage measurement
2009-08-13 10:55:09 +08:00
Adam Wang
b9e9f30d3e
1, Add H/W version control via R48 & R49 to distinguish.
...
2, Add USB HOST circuits which including
a) Micro-AB Receptacle,
b) Use a P-Channel MOSFET to switch 5V to external device by ID signel Hi or Low
detection
c) Add LT3925EDCB to convert battery voltage to USB power need
2009-08-07 22:30:22 +08:00
Adam Wang
d820e00c28
New serial_con part
2009-08-01 13:53:57 +08:00
Adam Wang
9649cdda43
Added serial con and updated bom
2009-08-01 13:46:35 +08:00
Adam Wang
2baf38fe30
This power_tree.sch is the purpose for layout and quick view
2009-07-26 23:21:39 +08:00
Adam Wang
2d4d667fcb
Added power_tree.sch to easily realize that structure of power tree which marked reasonable currents go through traces on power labels
2009-07-26 23:04:55 +08:00
Adam Wang
9e460ec1a7
For quick view, a function block schematic <main/function_block.sch> provided this version.
2009-07-25 00:52:36 +08:00
Adam Wang
f1e30f6f28
Due to add function_block schematic which roughly describes current system block of this version
2009-07-25 00:36:08 +08:00
Adam Wang
76e568186a
Change TM2301N to TM2301FN, TM2302N to TM2302FN
2009-07-07 09:42:06 +08:00
Adam Wang
710e49d187
Remove VENDOR CONTACT
2009-07-03 21:47:46 +08:00
Adam Wang
b099a322ae
Marked Power Label and Test Points
2009-07-03 18:01:18 +08:00
Adam Wang
c692d0c132
added main/*.bak files to gitignore
2009-07-03 17:33:58 +08:00
Adam Wang
8a4ed2bcf9
added .gitignore
2009-07-03 17:30:36 +08:00
Adam Wang
868613e587
initial commit
2009-07-03 17:20:21 +08:00
