Carlos Camargo
731eb6b683
Fix some DRC errors on key pads.
2010-01-28 08:50:22 -05:00
Adam Wang
74cd40332e
same as last commited contents
2010-01-22 20:36:26 +08:00
Adam Wang
05135c1216
1, renamed power-tree J1 to J2.
...
2, changed C26 from Copper layer to Component layer.
3, changed text of "http://sharism.cc/ " to "http://nanonote.cc/ "
4, generated *.lst to list every part as bom for confiming automatic insertion (AI) attibute.
5, edited and checked each part's attibutes as Normal+Insert for AI need.
6, generated *-Component.pos & *-Copper.pos for AI.
7, generated *-drc.rpt, gerber files & drill file again
2010-01-22 20:12:01 +08:00
Carlos Camargo
798c53f747
Change board and CC_BY_SA logo to silkscreen layer
2010-01-14 01:03:53 -05:00
Carlos Camargo
167c49bbff
Adding emQbit/UNAL text, Board logo and CC-BY-SA logo
2010-01-12 13:53:51 -05:00
Adam Wang
542365a774
1, generated PCBnew DRC file
2010-01-11 17:10:46 +08:00
Adam Wang
2e73936118
1, Set the coordinates origin for the photo plot and drill file
...
2, generated gerber files and drill file
3, renamed text 20100107 to 20100111
2010-01-11 16:55:27 +08:00
Adam Wang
c3a9386ef1
1. renamed U12 to KB3436 in function_block
...
2. added MT48LC32M16A2P-75:C in sch
3. renamed 32MB to 64MB in function_block
4. added "http://sharism.cc/ ""RXD/TXD/GND""+""-" in Silks_Cmp layer
2010-01-07 17:49:03 +08:00
Carlos Camargo
0b9dfcc8a6
Fix the errors on: http://wiki.qi-hardware.com/wiki/Layout_notes_avt2_RC2_20091230
2010-01-02 16:40:09 -05:00
Juan Brinez
cf491c1b7f
Added touch test points (4-pin connector).
2009-12-10 19:20:04 -05:00
Juan Brinez
f14678be23
Serial connector: 8P->3P.
2009-12-09 11:13:48 -05:00
Juan Brinez
7208b1b1da
Changes: see the <layout_note_revised2.txt> file.
2009-11-30 22:09:30 -05:00
Juan Brinez
f8d1531cfb
Changes: see the <layout_note_revised2.txt> file.
2009-11-30 09:55:39 -05:00
Juan Brinez
a71ccea08b
See the <layout_note_revised2.txt> file.
2009-11-30 09:28:06 -05:00
Juan Brinez
5a7f9b6bd4
Adding SW1 (small).
2009-11-05 09:32:16 -05:00
Juan Brinez
20a12e015f
Changing Serial Connector.
2009-11-04 10:15:44 -05:00
Juan Brinez
3cce1b9bbd
kb3436 for usb host.
2009-10-29 14:41:24 -05:00
Juan Brinez
de7c5fe160
Changin: EMI filter, KEYIN8 and RXD Pull-up.
2009-10-14 13:29:29 -05:00
Juan Brinez
438cf94a63
Updating Inner_L1 gerber. Complete conecctions board pcb.
2009-10-10 13:15:31 -05:00
Juan Brinez
e6a9eb4834
Updating Inner_L1 gerber. Complete conecctions board pcb.
2009-10-10 12:09:00 -05:00
Juan Brinez
909eac8a67
Added: Fill zones (copper pour), USB-DF IC.
2009-10-09 18:28:14 -05:00
Juan Brinez
225b6f3a28
Deleted unnecessary files.
2009-10-04 01:39:43 -05:00
Juan Brinez
6b3e9b9ab5
Deleted unnecessary files.
2009-10-04 01:37:24 -05:00
Juan Brinez
3f2894fab6
Added copper pour, Connect: 581, Unconnect: 80. (86.63%)
2009-10-04 01:28:53 -05:00
Juan Brinez
3bd3609881
Fixing power labels and connections on hierarchical sheets.
2009-10-03 16:43:22 -05:00
Juan Brinez
87caf3ea13
Fix ERC errors on sch file: V18, V33, V33SD, VBAT, VBAT0, VDDHP, VRTC, U3, SW1. Fix components: USB_MICRO_AB, Q5, NPN, CON1, U7, U5, D2.
2009-09-25 07:35:57 -05:00
Juan Brinez
0de2ecedff
Fixim problems: USB library.
2009-09-22 23:57:24 -05:00
Juan Brinez
69aff87972
Edited sdcw2012 (L3 & L5) library, swap pin 1~2~4.
2009-09-19 13:55:42 -05:00
Juan Brinez
bec3325b38
Edited crystal library, swap pin 1~2.
2009-09-19 13:43:14 -05:00
Juan Brinez
0f450c5af7
Fixing someting Erc errors, view the Qi_AVT2.erc file.
2009-09-15 13:59:29 -05:00
Juan Brinez
d59a67cd57
Fixing someting Erc errors, view the Qi_AVT2.erc file.
2009-09-15 13:57:02 -05:00
Juan Brinez
1dace079fc
Fixing someting Erc errors, view the Qi_AVT2.erc file.
2009-09-14 22:57:42 -05:00
carlos
9696407baf
Route SD CARD lines
2009-09-14 22:08:51 -05:00
Juan Brinez
197878d063
Fixing J3 footprint
2009-09-14 20:40:31 -05:00
carlos
14661f74af
Routing ...
2009-09-14 20:37:02 -05:00
carlos
2e80b02c4a
Inital route, SDRAM, NAND, LCD
2009-09-14 18:13:36 -05:00
carlos
a951b8c64f
Start routing. NAND, SDRAM memories, LCD
2009-09-14 17:31:13 -05:00
Juan Brinez
65c246ef98
Edited TPM58 (keys) and TPSR15 (reset) footprints.
2009-09-13 20:18:21 -05:00
Juan Brinez
893608943a
Resized sheet, changed the relative coordinates origin and rebuilded the board conectivity.
2009-09-13 14:27:26 -05:00
Carlos Camargo
c79740797e
Edited pcb, removed extra footprints, reorganized silks texts and more.
2009-09-13 10:11:12 -05:00
carlos
2ca7bcbf32
Remove unnecessary Test Points, Adding usb switch connections in .brd file
2009-09-12 22:21:09 -05:00
carlos
0fdac0d262
Remove unnecessary Test Points, Adding usb switch connections
2009-09-12 22:16:53 -05:00
carlos
e060183dc4
Resize and move silkscreen text
2009-09-11 19:41:56 -05:00
carlos
43b50c5799
Reduce and move some silsckreen text,
2009-09-11 19:39:35 -05:00
carlos
f9dc0a01bc
initial import
2009-09-04 21:51:48 -05:00
Adam Wang
f3a4240b84
2009/08/31 adam
...
1, <sch> add SW1 to configure boot selection from NAND or USB
2, <sch> change U6 pin definition pin1 = GND, pin2= OUT
3, <bom> delete R9 to be NC
4, <bom> add SW1 ESP40XX
2009-09-01 00:05:41 +08:00
Adam Wang
452130063a
minor gitignore fix
2009-08-31 11:39:46 +08:00
Adam Wang
014e1d7c08
1, Updated BOM / Schematic:
...
a) Added D6/MSCD104 for raising efficiency
b) Changed C57 to 0.1uF/16V, C49 to 1uF/16V, TP31 to CKE
c) Added R46/10k/5%,
d) Added TP85 for +5V USB host voltage measurement
2009-08-13 10:55:09 +08:00
Adam Wang
b9e9f30d3e
1, Add H/W version control via R48 & R49 to distinguish.
...
2, Add USB HOST circuits which including
a) Micro-AB Receptacle,
b) Use a P-Channel MOSFET to switch 5V to external device by ID signel Hi or Low
detection
c) Add LT3925EDCB to convert battery voltage to USB power need
2009-08-07 22:30:22 +08:00
Adam Wang
9649cdda43
Added serial con and updated bom
2009-08-01 13:46:35 +08:00
