aa327c8e37
slicer/Makefile, slicer.c: forgot to commit these files :-(
2015-01-08 09:12:53 -03:00
6b7cecaf5f
slicer/slice.c, slice.h: optionally draw a box around the object
2015-01-08 09:12:05 -03:00
65fa69cd0c
slicer/stl.c (stl_load_binary): remove debug output
2015-01-08 08:24:59 -03:00
a30024dce1
slicer/slice.c (add): detect and report inclined facets
2015-01-08 08:24:18 -03:00
c984021251
slicer/stl.c: mention where the format is documented
2015-01-08 08:11:12 -03:00
6a12d4724b
slicer/slice.c: repeat lower cuts at intermediate points
2015-01-08 08:07:21 -03:00
c82ea10493
slicer/stl.c (stl_load_file): support binary STL as well (on little-endian hosts)
2015-01-08 00:15:37 -03:00
3f2c6cdc30
slicer/slice.c (add): only output lower end of vertical walls (still needs work)
2015-01-08 00:14:21 -03:00
49abc13699
slicer/slice.h, slice.c, util.h: extract outlines of Z slices from mesh
2015-01-07 22:28:31 -03:00
5f31b94729
slicer/stl.h, stl.c: adapt for use in slicer
2015-01-07 21:26:50 -03:00
632a60f4b7
slicer/stl.c, stl.h: copy over from Neo900 misc/meme/
2015-01-07 20:44:35 -03:00
73c0489451
slicer/README: correct style and a typo
2015-01-07 20:37:48 -03:00
9de0b4396b
solidify/Makefile (LDFLAGS): rename to LDLIBS
...
The obsolete use of LDFLAGS for libraries caused the build to fail.
2014-09-04 01:30:05 -03:00
671b74d81c
cameo/templates/mkmk-simple: make $NAME.drl optional
...
pcbnew will not generate a drill file if the board that has neither
vias nor through-hole pads, so we shouldn't insist on it existing
either.
2014-04-27 10:45:54 -03:00
453f64e4fe
cameo/fped2d2z.pl: hack: maintain decimal point across flipping
2014-02-02 02:33:42 -03:00
0fc785d3a1
cameo/fped2stl.pl: hack: maintain decimal point across flipping
...
Since our regexps expect numbers to contain a decimal point, any result
that was an integer tripped the re-match after flipping. This hack works
around the problem by formatting the result such that it also has a decimal
point.
2013-12-06 19:07:30 -03:00
ff5b4a1ae8
cameo/zstack.pl: use the entire number for (x, y, z0)
2013-11-07 04:55:57 -03:00
d64a34045f
gp2rml/gp2rml.c: new option -s to set Z scale factor
...
Sounds weird, but the mill seems to be off by some 10%.
2013-11-07 03:25:45 -03:00
033d55c8ad
cameo/zstack.pl: output one point at (x, y, z0) to set reference level
...
Otherwise, gp2rml will eliminate any offset. (x, y) is an arbitrary point
from the toolpaths.
2013-11-06 23:15:24 -03:00
e82667e680
cameo/fped2d2z.pl: new options -x and -y to flip on X and Y axis
2013-11-03 23:21:43 -03:00
30676651ec
cameo/fped2stl.pl: use "eq" for string equality, not "=="
2013-11-03 19:05:56 -03:00
5b70e92254
cameo/fped2stl.pl: new options -x and -y to flip on X and Y axis
2013-11-02 18:03:49 -03:00
4fa9e129ee
cameo/fped2stl.pl: sort layers by Z position
...
This way, the ordering of the layer stack doesn't matter.
2013-11-02 13:26:04 -03:00
e62da4e2bb
cae-tools/cameo/fped2stl.pl (flush): substitute coordinates only once
...
If a layer was at exactly z = 1 mm, we would set it to $z1 (after temporarily
setting it to $z) even in cases where it should be at $z.
2013-11-01 21:15:43 -03:00
96063ccff9
cameo/fped2stl.pl: fped 2D stack to STL mesh converter (experimental)
2013-10-14 13:31:42 -03:00
c5f54df4a0
cameo/stl.c: generate real STL (WIP)
...
Some facets look funny in Meshlab although it shows all the normals pointing
in the right direction.
2013-10-14 12:32:27 -03:00
ebb7d028ea
Revert "poly2d/p2d_hsort.c (p2d_hier_free): make freeing of polygons optional"
...
This reverts commit d758359791
2013-10-14 11:13:22 -03:00
ae9ad0348c
cameo/stl.c (stl): update for poly2d API change
2013-10-14 11:12:32 -03:00
626dbe52e1
poly2d/: store actual values in struct f2d, not pointers
...
... since the data structures they point to have internal use only.
2013-10-14 11:11:27 -03:00
8b6e4168d3
cameo/: add "stl" command to generate STL slices (WIP)
2013-10-13 22:10:43 -03:00
ca271dd313
poly2d/f2d_tri.c (f2d_free_all): free list of faces
2013-10-13 22:09:49 -03:00
d0b5696a07
poly2d/f2d_tri_holes.cpp (find_point): don't loop forever on closed polygons
2013-10-13 21:57:50 -03:00
d758359791
poly2d/p2d_hsort.c (p2d_hier_free): make freeing of polygons optional
2013-10-13 21:29:48 -03:00
3d8a8d04aa
poly2d/f2d_tri_holes.cpp (tri_holes_append): rename to f2d_tri_holes_append
2013-10-13 21:29:13 -03:00
f93e93ca89
poly2d/: add triangulation (untested)
2013-10-13 20:33:05 -03:00
7aaaf8671f
cameo/gerber.c: crudely support some cases of G03
2013-09-20 18:47:39 -03:00
44d58a54fa
cameo/ops.c (tool_comp_paths): don't crash if path list is empty
2013-09-20 17:36:16 -03:00
b8c927831f
cameo/templates/mkmk-simple: support new edge file names
...
KiCad recently changes file names. Edges used to be named *-PCB_Edges.gbr
but can now be named *-Edge_Cuts.gbr or *-Edge_Cuts.pho
2013-08-06 19:15:48 -03:00
9a6772f79d
cameo/templates/mkmk-simple: use "set size ratio -1", not "set size ratio square"
...
"ratio -1" produces a 1:1 ratio of the units (which is what we want) while
"ratio square" makes the xrange and yrange the same size, whatever that's
supposed to be good for.
2012-12-27 19:52:16 -03:00
c34a154e25
cameo/templates/mkmk-simple: use aspect ratio 1:1 with gnuplot (plot, dplot)
2012-11-21 23:18:52 -03:00
e246127c6c
cameo/templates/mkmk-simple: also look for new <name>-NPTH.drl
...
Recent versions if KiCad save non-plated through holes in a separate
drill file, called <name>-NPTH.drl
2012-08-23 23:01:49 -03:00
a030eff963
cameo/: new command "flip" to flip paths on the X or Y axis
2012-08-23 09:04:44 -03:00
c73509dacc
cameo/fped2d2z.pl: new option -t Zmax to set the height of the workpiece
...
This is similar to -r, except that we don't swap X and Y, and we use
the specified value instead of searching for the maximum in the input
data.
2012-08-22 13:51:16 -03:00
53fe70950d
poly2d/: try to work around spurious aborts in CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2
...
cameo encountered spurious aborts with the following message:
terminate called after throwing an instance of 'CGAL::Precondition_exception
what(): CGAL ERROR: precondition violation!
Expr: is_simple_2(first, last, traits)
File: /usr/include/CGAL/Polygon_2/Polygon_2_algorithms_impl.h
Line: 420
These aborts come and go even if just the coordinate origin is slightly
changed. Setting CGAL_POLYGON_NO_PRECONDITIONS in p2d_area_holes.cpp
made them go away in some cases, but cameo could still run into an
assertion violation (in CGAL).
We now check all the polygons, outer boundary and holes, being sent to
CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2 for
simplicity, and stop recursing if there is any hint of a problem.
This seems to avoid trouble for now, but the issue deserves further
investigation.
2012-08-22 13:50:19 -03:00
072b7804ee
cameo/: experimental command "outside" to detect real outer borders
...
Should be merged into tool_comp_paths later.
2012-06-12 15:23:01 -03:00
378aab025f
cameo/path.c: new function path_is_inside which calls p2d_contains_poly
2012-06-12 15:04:59 -03:00
7b54293bff
cameo/: move conversion between poly2d and "struct path" from area-poly2d.c to poly2d.c
...
Untested.
2012-06-12 15:04:40 -03:00
f48754e067
cameo/path.c: make path_is_closed global
2012-06-12 14:24:50 -03:00
382d14dcbb
cameo/path.c: move assert(path_is_closed) into function and improve diagnostic
...
It's often hard to find an offending path. To help with this, we
now print the start and end coordinates.
2012-06-12 14:01:55 -03:00
e69fa24133
cameo/: new commands "remove" and "keep" for path filtering (untested)
2012-06-12 12:32:08 -03:00
Werner Almesberger