mirror of
git://projects.qi-hardware.com/cae-tools.git
synced 2024-12-23 08:59:53 +02:00
249 lines
8.3 KiB
Plaintext
249 lines
8.3 KiB
Plaintext
solidify - Merge two opposing faces of a part into a solid
|
|
==========================================================
|
|
|
|
Solidify is a tool for adjusting the orientation of two opposing faces
|
|
(surfaces) of a three-dimensional part such that they correctly align
|
|
with each other, and to generate output that represents the volume
|
|
(solid) enclosed between the two faces.
|
|
|
|
This work is distributed under the terms of the GNU GENERAL PUBLIC
|
|
LICENSE, Version 2:
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
For your convenience, a copy of the complete license has been included
|
|
in the file COPYING.GPLv2.
|
|
|
|
|
|
Theory of operation
|
|
-------------------
|
|
|
|
The shape of a three-dimensional part can be reconstructed by scanning
|
|
two opposing faces of the part. The part is then the space between the
|
|
two faces.
|
|
|
|
When doing this in practice, a few problems arise. One of them is that
|
|
the faces will not be perfectly opposed. E.g., the part being scanned
|
|
may be inclined, rotated, or shifted. Solidify implements the following
|
|
operations:
|
|
|
|
- change the inclination of the part along the x and y axis (i.e., the
|
|
part's z plane is tilted). The general assumption is that the part is
|
|
scanned with its main surfaces parallel to the z plane and that only
|
|
small adjustments are necessary.
|
|
|
|
- change the part's height above the z plane. There is a conceptual z0
|
|
plane, parallel to the z plane, that is coplanar with a reference
|
|
surface in the face. The height of the z0 plane above the z plane
|
|
can be adjusted.
|
|
|
|
- set the distance between the z0 plane of the top face and the z0 plane
|
|
of the bottom face. This defines the thickness at some point of the
|
|
part.
|
|
|
|
- align the two faces by rotating them around the z axis and by shifting
|
|
them in the x and y direction.
|
|
|
|
Except for setting the distance between z0 planes, all these operations
|
|
are interactive. Solidify furthermore provides visual clues that help to
|
|
minimize anomalies.
|
|
|
|
Solidify reads faces as comma-separated point clouds generated by
|
|
Dr.Picza3. It outputs a set of files that define the part in POV-Ray.
|
|
|
|
|
|
Starting a project
|
|
------------------
|
|
|
|
For a project, the following information is necessary:
|
|
|
|
- the name of the project file. This file must not yet exist. Solidify
|
|
store information pertaining to the project, such as the names of the
|
|
file containing the faces and the orientation set for the faces.
|
|
Solidify project files typically have the extension .sfy.
|
|
|
|
- two text files containing the two faces a comma-separated point
|
|
clouds. If a file name ends with the extension .bz2, solidify will
|
|
uncompress the file on the fly with bunzip2.
|
|
|
|
If instead of a file name a HTTP or HTTPS URL is given, solidify will
|
|
try to download the file with "wget" into a directory called .cache.
|
|
This directory must be manually created for this purpose. On further
|
|
invocations, solidify will load the file directly from the cache.
|
|
|
|
- the distance between the z0 planes of the two faces. Typically, this
|
|
is the thickness of the part in some area that is flat on both sides.
|
|
The distance is measured in millimeters.
|
|
|
|
To generate a project name.sfy with the faces top.svn and bottom.sfy
|
|
and a z0 distance of 1.5 mm, run
|
|
|
|
$ solidify name.sfy top.csv bottom.csv 1.5
|
|
|
|
Solidify will load the faces (this can take a while) and then show the
|
|
top face for z0 plane editing.
|
|
|
|
|
|
Leaving solidify
|
|
----------------
|
|
|
|
To exit solidify and save the current settings in the project file,
|
|
simply press "q". To quit without saving, terminate solidify by pressing
|
|
^C in the shell.
|
|
|
|
|
|
Changing an existing project
|
|
----------------------------
|
|
|
|
Start solidify with the name of the project file, e.g.,
|
|
|
|
$ solidify name.sfy
|
|
|
|
Solidify will load the face files and then show the top face for z0
|
|
plane editing.
|
|
|
|
|
|
Adjusting the z0 plane
|
|
----------------------
|
|
|
|
There are four buttons at the right side of the screen. The ones labeled
|
|
"A" and "B" are for editing the top and bottom faces.
|
|
|
|
Note that each face has its own z0 plane, which is controlled
|
|
independently from the of the other z0 plane.
|
|
|
|
|
|
Display
|
|
- - - -
|
|
|
|
The center area of the screen shows the respective face from the top.
|
|
Areas below the z0 plane are shown in red, areas above the z0 plane are
|
|
in green. Intersections of the z0 plane with the face are shown in blue.
|
|
|
|
The intensity of the color increases with the distance between the face
|
|
and the z0 plane. To make it easier to see which way the planes are
|
|
facing, areas with only a small difference and thus often directly
|
|
adjacent to an intersection (blue) are colored with more intense red and
|
|
green.
|
|
|
|
Below and on the right side of the central view, lateral projections of
|
|
cuts at the cursor position are shown.
|
|
|
|
|
|
Control
|
|
- - - -
|
|
|
|
The z0 plane is manipulated with the mouse wheel. Rotating the mouse
|
|
wheel with the pointer near the center of the main view raises or lowers
|
|
the z0 plane. Outside the center, rotating the mouse wheel tilts the z0
|
|
plane by pushing or pulling at the pointer position.
|
|
|
|
The center area is marked with a yellow circle that becomes visible when
|
|
approaching it with the mouse pointer.
|
|
|
|
|
|
Workflow
|
|
- - - -
|
|
|
|
There are two objectives when adjusting the z0 plane:
|
|
|
|
- it should intersect the face at the point(s) that define the distance
|
|
between z0 planes, and
|
|
|
|
- the z0 plane should be parallel to the principal orientation of the
|
|
part
|
|
|
|
As a first step, it's usually best to pick one or two flat reference
|
|
areas containing the zones where the distance was measures, and to tilt
|
|
the z0 plane until it is roughly parallel to these areas. This can be
|
|
easily seen on the lateral projections.
|
|
|
|
Then the z0 plane is be raised or lowered until it intersects. The
|
|
result should be a large blue field that covers the reference areas.
|
|
|
|
If the part is not only tilted but also warped, it may not be possible
|
|
to evenly level it. For achieving as good an adjustment as possible, one
|
|
should attempt to maximize and evenly distribute the blue areas on the
|
|
main view.
|
|
|
|
|
|
Aligning the faces
|
|
------------------
|
|
|
|
When clicking the "A+B" or "B+A" button, both faces are shown
|
|
superimposed, with the bottom face rotated around the y axis.
|
|
|
|
With "A+B", the top face is manipulated, with "B+A" the bottom face.
|
|
The display is the same in both cases.
|
|
|
|
|
|
Display
|
|
- - - -
|
|
|
|
The following colors are used:
|
|
|
|
- white: both faces overlap
|
|
- green: only the top face. There are no points in the bottom face at
|
|
this location
|
|
- green: only the bottom face
|
|
- blue: the top face is below the bottom face
|
|
|
|
|
|
Control
|
|
- - - -
|
|
|
|
Again, the faces are controlled with the mouse wheel and the function of
|
|
the wheel depends on whether the pointer is in the central area or not.
|
|
The central area is marked with a yellow circle that is displayed when
|
|
the mouse pointer approaches it.
|
|
|
|
To rotate the face around its center, move the mouse pointer outside the
|
|
center area and spin the mouse wheel. The larger the distance from the
|
|
center, the faster the face spins.
|
|
|
|
Spinning the mouse wheel when the pointer is inside the central area
|
|
shifts the face along the x and y axis. (*) The central circle is
|
|
divided into four areas: in the left and right area, the face is shifted
|
|
horizontally, in the upper and lower area, the face is shifted
|
|
vertically.
|
|
|
|
(*) When shifting the bottom face, the direction depend on the face's
|
|
rotation. This is a bug but it has no other ill consequences.
|
|
|
|
|
|
Workflow
|
|
- - - -
|
|
|
|
The faces usually don't overlap perfectly. The goal is thus to
|
|
distribute the red or green overlaps evenly.
|
|
|
|
If significant portions of the part are drawn in blue, this means that
|
|
the orientation or the height of the z0 planes is not correct.
|
|
|
|
If the part is very thin, it may be necessary to raise the faces a but
|
|
above the z0 plane to keep the faces from intersecting due to warping.
|
|
|
|
|
|
Rendering with POV-Ray
|
|
----------------------
|
|
|
|
|
|
|
When invoked with the option -p, solidify generates the following three
|
|
files:
|
|
|
|
- name.inc: a POV-Ray file that renders the part. The part is called
|
|
"Part_name"
|
|
- name-top.pgm: a PGM (Portable GrayMap) image containing a height field
|
|
for the top face
|
|
- name-bot.pgm: height field of the bottom face
|
|
|
|
Invocation is as follows:
|
|
|
|
$ solidify -p name.sfy
|
|
|
|
A part can be used in a POV-Ray scene by #including its name.inc file
|
|
and then placing the object.
|