This is a little awkward: to change a variable used as key to an
assignment, one first had to change the name such that it doesn't
clash, hit Enter, and then edit the variable again to change its
type.
Variable type changes should pick up the edit in progress and allow
a type change to also imply acceptance of the variable.
- gui_frame.c (build_frame_label): the root frame doesn't participate in any
form of dragging, so we don't set up dragging for it at all
- gui_frame_drag.c (pick_table_cell, swap_table_cells_by_coord,
swap_table_rows): helper functions for swapping rows in a Gtk table
- gui_frame_drag.c (swap_frames, drag_frame_motion, setup_frame_drag): added
support for reordering of frames by dragging
- gui_frame_drag.c (SWAP, swap_vars, swap_values, swap_rows): removed SWAP().
Use swap() from util.h instead.
- TODO: removed frame ordering entry
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5970 99fdad57-331a-0410-800a-d7fa5415bdb3
- removed root_frame. "frames" now takes its place.
- removed frame->prev. In those few cases where we need the previous frame (for
deletion and dumping), we walk the list or recurse.
- the list of frames is now in GUI order, not file order.
- when reading the .fpd file, put the root frame first and leave it there.
- instead of walking the frames list and excluding the root frame by testing
frame->name, just start at frames->next
- likewise, instead of testing !frame->name just use frame == frames
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5948 99fdad57-331a-0410-800a-d7fa5415bdb3
documentation.
- Makefile, icons/frame_locked.fig, icons/frame_ready.fig: removed the icons of
locked and ready frames
- gui_tool.c: removed the frame tool and all the image handling associated with
it, leaving only the bits in place that are used by frame to canvas dragging
- gui_tool.h, gui_tool.c (tool_frame_update, tool_frame_deleted), gui_canvas.c
(key_press_event), gui_frame.c (popup_del_frame, select_frame): removed
the notifications of frame changes
- gui.html: removed the old clumsy frame reference procedure and described the
new way
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5937 99fdad57-331a-0410-800a-d7fa5415bdb3
tables such that items are selected on release and we can thus drag without
selecting. (From a user point of view, selecting would be fine. But selecting
may sometimes cause a change_world or similar, destroying the widget, which
upsets drag and drop.)
- gui_frame_drag.c (setup_var_drag, setup_value_drag): moved targets to file
scope
- gui_frame_drag.c (has_target, drag_var_motion, drag_value_motion): Gtk
doesn't check target compatibility for us, so we have to do this explicitly
- gui_frame_drag.c (drag_begin): don't leak the pixbuf
- gui_frame_drag.c (is_dragging, drag_end), gui_frame_drag.h: for drag vs.
activations on button release, we now can test what is being dragged. For
this, we have to explicitly clear the variable "dragging" when done.
- gui_frame_drag.c (setup_var_drag, setup_value_drag): moved common setup to
setup_drag_common
- gui_frame_drag.c (setup_frame_drag, drag_frame_motion), gui_frame_drag.h,
gui_frame.c (frame_select_event, build_frame_label): added infrastructure for
dragging frames
- gui_frame_drag.c (setup_canvas_drag, drag_canvas_motion), gui_frame_drag.h,
gui_canvas.c (motion_notify_event, make_canvas): added infrastructure for
dragging to the canvas
- gui_frame.c (table_var_select_event, table_value_select_event, build_table):
split logic into press and release action, so that we can drag without
implicitly selecting
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5930 99fdad57-331a-0410-800a-d7fa5415bdb3
a column, drag the variable or any of its values and drag horizontally. To move
a row, drag one of its value vertically.
- gui_frame.c (table_var_select_event, table_value_select_event): return FALSE
if dragging is possible
- gui_frame.c (build_table), gui_frame_drag.h, gui_frame_drag.c, Makefile:
support for rearranging tables using Gtk's drag and drop mechanism
- TODO: two items less
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5929 99fdad57-331a-0410-800a-d7fa5415bdb3
unselected value was set to the background color for an inactive row. Now it's
set to the color of an active row.
- gui_frame.c (unselect_value): to detect a table, consider not only the number
of rows but also the number of columns
- gui_frame.c (unselect_value, edit_value_list): use COLOR_EXPR_* for
expressions, not COLOR_VAR_* (this has no visual effect for now, since the
colors in questions have the same value)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5918 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_frame.c (build_table): don't add an extra column for wrapped tables. They
look better without it.
- gui_frame.c (build_table): add two pixels of background color between parts
of a wrapped table
- gui_style.h (FRAME_AREA_MISC_WIDTH): reduced to better fit real layout
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5848 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_frame.c (build_table): restructured code to build tables column by column
instead of row by row
- gui_frame.c (build_table): wrap tables wider than the screen area available
for variables and tables
- gui_util.h, gui_util.c (get_widget_width): new helper function that returns a
widget's requested width
- gui.c, gui_style.h: replace hard-coded initial pane size with constants
DEFAULT_FRAME_AREA_WIDTH and DEFAULT_FRAME_AREA_HEIGHT
- gui.c (change_world): pass the width of the left pane as a wrapping hint to
build_frames
- gui_frame.c (build_frames): subtract width of longest package template or
frame name from available width
- gui.c (change_world): moved call to build_frames to separate function
do_build_frames
- gui.c (gui_main): used g_signal_connect_swapped instead of g_signal_connect
for no good reason
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5847 99fdad57-331a-0410-800a-d7fa5415bdb3
having to go all the way up to the frame.
- gui_frame.c: factory tables had very ragged indentation
- gui_frame.c: added "Add variable" and "Add loop" to variable, table, and loop
pop-up
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5843 99fdad57-331a-0410-800a-d7fa5415bdb3
of active frame reference, row, and loop instance affects this value, as it
should.
- obj.c (run_loops): reset loop->curr_value to UNDEF when instantiation is done
- obj.c (generate_frame): reset frame->curr_parent to NULL when instantiation
is done
- expr.c (eval_var, eval_string_var): distinguish beteen instantiation and
editing mode, and use "active" values in the latter
- gui_frame.c (edit_var, edit_value, edit_value_list): display the value of the
variable or the active expression in the "X" field
- gui_frame.c (assignment_value_select_event, table_value_select_event,
loop_from_select_event, loop_to_select_event): pass the frame to edit_value
and edit_value_list
- expr.c (str_unit): since we may now accidently expose a wider range of
exponents, removed -2 ... 2 exponent range limitation
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5788 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.h, gui_status.c (edit_*): edit functions now accept a tooltip
- added tooltips for editable status area items
- tooltips on setup_set_type_* looked strange. Show them only for the value
field next to the type field.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5776 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.h: use macro to generate status_set_* delarations, just as we use
a macro for their definitions
- added tooltips for all non-editable fields in the status area
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5773 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makefile: use PID in temporary file name in PPM to XPM conversion, so that we
don't get mysterious failures in parallel builds
- gui_util.c (debug_save_pixbuf, debug_save_widget): helper functions to debug
pixbuf and widget content
- Makefile: added target "montage" to show the images recorded with
debug_save_pixbuf and debug_save_widget
- gui_over.c: when debugging, record the saves pixbuf in files
- gui_tool.c (tool_hover): removed unnecessary initialization
- added infrastructure for tooltips on the canvas (doesn't work properly yet)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5769 99fdad57-331a-0410-800a-d7fa5415bdb3
existed, thus creating a structure that could be saved but no longer loaded.
Likewise, one could add new variables/loops/columns if there was already one
named "_", thus creating the same problem.
- gui_frame.c (pop_up_frame): disable "Add frame" if we already have a frame
named "_"
- gui_frame.c (pop_up_frame): disable "Add variable" and "Add loop" if we
already have a variable or loop named "_"
- gui_frame.c (pop_up_single_var, pop_up_table_var): disable "Add column" if
we already have a variable or loop named "_"
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5765 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_frame.c (popup_del_frame): when deleting a frame, notify the frame tool
so that it can undo any locking
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5764 99fdad57-331a-0410-800a-d7fa5415bdb3
expression, the background of the first expression did not revert to its
original color.
- gui_style.h (COLOR_CHOICE_SELECTED): made blue a bit lighter, to improve
contrast of black foreground text
- gui_frame.c (unselect_value): build_assignment uses COLOR_EXPR_PASSIVE for
expressions in assignments, so we also have to do the same here.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5763 99fdad57-331a-0410-800a-d7fa5415bdb3
deleted. The new algorithm checks for collisions and also reduces the number
of allocations.
- dump.c (generate_name): store the name in the vector being named
- dump.c (generate_name): compare the new name against all names in use
- dump.c (base_name, obj_base_name, print_label): don't allocate the name
- dump.c: changed all users of the above functions accordingly
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5715 99fdad57-331a-0410-800a-d7fa5415bdb3
last count
- loop iterations now show the actual value, not the zero-based iteration
number
- gui.html: added a GUI manual (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5531 99fdad57-331a-0410-800a-d7fa5415bdb3
- README: added build prerequisites
- "part name" is now more correctly called "package name"
- changed keyword "part" to "package"
- removed inst_debug and struct inst_ops.debug functions - never really used
them anyway
- we can now generate multiple packages from a single file
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5478 99fdad57-331a-0410-800a-d7fa5415bdb3
- we can now scroll-wheel through table rows
- added menu branch "View" with zoom and var/code display controls
- commented out is_min_of_next until its fate is decided, so that we don't get
a warning
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5462 99fdad57-331a-0410-800a-d7fa5415bdb3
of successful validation
- free previous expression in set_col_values
- added rapid entry also for table values (fill the row)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5460 99fdad57-331a-0410-800a-d7fa5415bdb3
- moved definition of expr_result from expr.c to fpd.y
- new header file fpd.h with all the things fpd.l and fpd.y export
- edit_var already calls edit_nothing, so there's no need to call it before
- added rapid entry option for loops, variables, and columns: var = val, ...
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5459 99fdad57-331a-0410-800a-d7fa5415bdb3
instance is found. This allows recovery from mistakes where a failing item
never gets instantiated.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5434 99fdad57-331a-0410-800a-d7fa5415bdb3
- instantiate_meas if a mesurements has no samples, do the next one, don't stop
completely
- when instantiation fails, the corresponding vector, object, or loop is now
marked red in the variables/items list.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5432 99fdad57-331a-0410-800a-d7fa5415bdb3
- item ordering heuristics failed to properly use "."
- updated description of "need" in dump.c
- saved fbga.fpd and sc89.fpd with new ordering
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5427 99fdad57-331a-0410-800a-d7fa5415bdb3
- having variables and items on the screen at the same time was too much. We
can now toggle with "/" while the canvas has the focus. (This needs better
controls.)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5425 99fdad57-331a-0410-800a-d7fa5415bdb3
- active items can now be selected from the item list (selecting inactive items
will be a little harder)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5424 99fdad57-331a-0410-800a-d7fa5415bdb3
space than it needs
- dump.c: separated ordering function from actual printing
- added list of vectors and object (on the right side of the variables)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5423 99fdad57-331a-0410-800a-d7fa5415bdb3
- implemented eval_str
- expand() now tries to obtain a string
- added example fbga.fpd to demonstrate use of strings
- when invoked with an inexisting file, fped now starts with an empty model,
instead of getting confused
- we now religiously call edit_nothing before adding fields to edit, so that
we won't create a loop through edit-next
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5421 99fdad57-331a-0410-800a-d7fa5415bdb3
get it back when we lose it
- improved heuristics for measx/measy: instead of looking for "next" or "max"
on secondary coordinate, pick the one that's closest. I.e., if there's a
chance to just connect with x' = 0 or y' = 0, do it.
- mouse wheel on loop value now selects next/previous value
- corrected proximity calculation for measurements
- vec/frame/meas toggle now deselects, so that we don't accidently leave a
supposedly hidden item selected
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5413 99fdad57-331a-0410-800a-d7fa5415bdb3
