fped/geda.c

/*
 * geda.c - Dump objects in the gEDA PCB board/module format
 *
 * Written 2009, 2011 by Werner Almesberger, and 2016 by Erich Heinzle
 * Copyright 2009, 2011 by Werner Almesberger
 * Copyright 2016, Erich Heinzle
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */


#include <stdlib.h>
#include <stdio.h>
#include <assert.h>

#include "coord.h"
#include "inst.h"
#include "geda.h"


static void geda_centric(struct coord a, struct coord b,
	struct coord *center, struct coord *size)
{
	struct coord min, max;

	min.x = units_to_geda(a.x);
	min.y = units_to_geda(a.y);
	max.x = units_to_geda(b.x);
	max.y = units_to_geda(b.y);

	sort_coord(&min, &max);

	size->x = max.x-min.x;
	size->y = max.y-min.y;
	center->x = (min.x+max.x)/2;
	center->y = -(min.y+max.y)/2;
}

static unit_type geda_pad_width(struct coord size)
{
	if (size.x >= size.y) {
	    return size.y;
	} else {
	    return size.x;
	}
}

static void geda_pad_start_finish(struct coord a, struct coord b,
    struct coord *start, struct coord *finish)
{
        struct coord size, center, min, max;

        min.x = units_to_geda(a.x);
        min.y = units_to_geda(a.y);
        max.x = units_to_geda(b.x);
        max.y = units_to_geda(b.y);

        sort_coord(&min, &max);

        size.x = max.x-min.x;
        size.y = max.y-min.y;
        center.x = (min.x+max.x)/2;
        center.y = -(min.y+max.y)/2;
	/* gEDA pads are drawn as a line, of a certain thickness */
	if (size.x >= size.y) { /* wider than tall, width = size.y */
	    start->x = min.x + size.y/2;
	    start->y = -center.y;
	    finish->x = max.x - size.y/2;
	    finish->y = -center.y;
	} else { /* taller than wide, width = size.x */
	    start->y = (min.y + size.x/2);
            start->x = center.x;
            finish->y = (max.y - size.x/2);
            finish->x = center.x;
	} 
}

static void do_geda_drill(FILE *file, const struct inst *pad, struct coord *padSize)
{
	const struct inst *hole = pad->u.pad.hole;
	struct coord center, size;
	
	if (!hole)
		return;

	geda_centric(hole->base, hole->u.hole.other, &center, &size);

	fprintf(file, "%d %d ", center.x, -center.y); /* x,y position of hole */
	if (padSize->x <= padSize->y) { /* sort out diameter of copper annulus, remembering obrounds*/
		fprintf(file, "%d ", padSize->x);
	} else {
		fprintf(file, "%d ", padSize->y);
	}
	fprintf(file, "100 100 %d", size.x); /* default copper clearance, mask, then drill size */
}


static void geda_pad(FILE *file, const struct inst *inst)
{
	struct coord center, size, start, finish;

	geda_centric(inst->base, inst->u.pad.other, &center, &size);

	if (inst->u.pad.hole) { /* pin */
		/* Pin[X Y Thickness Clearance Mask Drill Name Number SFlags] */
		fprintf(file, "\tPin[");
		do_geda_drill(file, inst, &size); /* need pad size to figure out annulus */
		fprintf(file, " \"%s\" \"%s\"", inst->u.pad.name, inst->u.pad.name);
		if (inst->obj->u.pad.rounded) { /* round pin */
			fprintf(file, " \"\"]\n");
		} else { /* square pad, ignore octagonal for now */
			fprintf(file, " \"square\"]\n");
		}
	} else { /* SMD */
		/* Pad[X1 Y1 X2 Y2 Thickness Clearance Mask Name Number SFlags] */
		geda_pad_start_finish(inst->base, inst->u.pad.other, &start, &finish);
		fprintf(file, "\tPad[%d %d %d %d %d 100 100 \"%s\" \"%s\" \"square\"]\n", start.x, -start.y, finish.x, -finish.y, geda_pad_width(size), inst->u.pad.name, inst->u.pad.name);
	}
}


static void geda_hole(FILE *file, const struct inst *inst)
{
	struct coord center, size;
	if (inst->u.hole.pad)
		return;
	geda_centric(inst->base, inst->u.hole.other, &center, &size);

	/* Pin[X Y Thickness Clearance Mask Drill Name Number SFlags] */

	fprintf(file, "\tPin[%d %d", center.x, center.y);
	if (size.x <= size.y) { /* see which obround dimension is smallest */
		fprintf(file, " %d 100 100 %d", size.x, size.x);
		/* obround hole turned into round hole of diameter size.x */
	} else {
		fprintf(file, " %d 100 100 %d", size.y, size.y);
		/* obround hole turned into round hole of diameter size.y */
	}
	fprintf(file, " \"\" \"\" \"hole\"]\n");
}

static void geda_line(FILE *file, const struct inst *inst)
{
	/*
	 * Xstart, Ystart, Xend, Yend, Width
	 */
	fprintf(file, "\tElementLine[%d %d %d %d %d]\n",
		units_to_geda(inst->base.x),
		-units_to_geda(inst->base.y),
		units_to_geda(inst->u.rect.end.x),
		-units_to_geda(inst->u.rect.end.y),
		units_to_geda(inst->u.rect.width));
}


static void geda_rect(FILE *file, const struct inst *inst)
{
	unit_type xa, ya, xb, yb;
	unit_type width;

	xa = units_to_geda(inst->base.x);
	ya = units_to_geda(inst->base.y);
	xb = units_to_geda(inst->u.rect.end.x);
	yb = units_to_geda(inst->u.rect.end.y);
	width = units_to_geda(inst->u.rect.width);

	fprintf(file, "\tElementLine[%d %d %d %d %d]\n",
		xa, -ya, xa, -yb, width);
	fprintf(file, "\tElementLine[%d %d %d %d %d]\n",
		xa, -yb, xb, -yb, width);
	fprintf(file, "\tElementLine[%d %d %d %d %d]\n",
		xb, -yb, xb, -ya, width);
	fprintf(file, "\tElementLine[%d %d %d %d %d]\n",
		xb, -ya, xa, -ya, width);
}


static void geda_circ(FILE *file, const struct inst *inst)
{
	/*
	 * Xcenter, Ycenter, Width, Height, startAngle, stopAngle, Width
	 */
	fprintf(file, "\tElementArc[ %d %d %d %d 0 360 %d]\n",
		units_to_geda(inst->base.x),
		-units_to_geda(inst->base.y),
		units_to_geda(inst->u.arc.r),
        	units_to_geda(inst->u.arc.r),
		units_to_geda(inst->u.arc.width));
}


static void geda_arc(FILE *file, const struct inst *inst)
{
	double b;

	/*
	 * Xcenter, Ycenter, Width, Height, startAngle, stopAngle, Width
	 * 
	 */
	b = inst->u.arc.a1 - 180;
	while (b <= 0)
		b += 360;
	while (b > 360)
		b -= 360;
	fprintf(file, "\tElementArc[%d %d %d %d %d %d %d]\n",
		units_to_geda(inst->base.x),
		-units_to_geda(inst->base.y),
        	units_to_geda(inst->u.arc.r),
        	units_to_geda(inst->u.arc.r),
		(int) b,
		(int) (inst->u.arc.a2-inst->u.arc.a1),
		units_to_geda(inst->u.arc.width));
}

static void geda_layout_header(FILE *file)
{
	fprintf(file, "# release: pcb 20110918\n\n");
	fprintf(file, "# To read pcb files, the pcb version (or the git source date) must be >= the file version\n");
	fprintf(file, "FileVersion[20070407]\n\n");
	fprintf(file, "PCB[\"\" 600000 500000]\n\n");
	fprintf(file, "Grid[2500.0 0 0 1]\n");
	fprintf(file, "Cursor[2500 62500 0.000000]\n");
	fprintf(file, "PolyArea[3100.006200]\n");
	fprintf(file, "Thermal[0.500000]\n");
	fprintf(file, "DRC[1200 900 1000 700 1500 1000]\n");
	fprintf(file, "Flags(\"nameonpcb,clearnew,snappin\")\n");
	fprintf(file, "Groups(\"1,3,4,c:2,5,6,s:7:8\")\n");
	fprintf(file, "Styles[\"Signal,1000,7874,3150,2000:Power,2000,8661,3937,2000:Fat,8000,13780,4724,2500:Sig-tight,1000,6400,3150,1200\"]\n\n");
	fprintf(file, "Attribute(\"PCB::grid::unit\" \"mil\")");
}

static void geda_layout_footer(FILE *file)
{
	fprintf(file, "Layer(1 \"component\")\n(\n)\n");
	fprintf(file, "Layer(2 \"solder\")\n(\n)\n");
	fprintf(file, "Layer(3 \"comp-GND\")\n(\n)\n");
	fprintf(file, "Layer(4 \"comp-power\")\n(\n)\n");
	fprintf(file, "Layer(5 \"sold-GND\")\n(\n)\n");
	fprintf(file, "Layer(6 \"sold-power\")\n(\n)\n");
	fprintf(file, "Layer(7 \"signal3\")\n(\n)\n");
	fprintf(file, "Layer(8 \"outline\")\n(\n)\n");
	fprintf(file, "Layer(9 \"silk\")\n(\n)\n");
	fprintf(file, "Layer(10 \"silk\")\n(\n)\n");
}

static void geda_inst(FILE *file, enum inst_prio prio, const struct inst *inst)
{
	switch (prio) {
	case ip_pad_copper:
	case ip_pad_special:
		geda_pad(file, inst);
		break;
	case ip_hole:
		geda_hole(file, inst); /* obround is exported as a round circle */
		break;
	case ip_line:
		geda_line(file, inst);
		break;
	case ip_rect:
		geda_rect(file, inst);
		break;
	case ip_circ:
		geda_circ(file, inst);
		break;
	case ip_arc:
		geda_arc(file, inst);
		break;
	default:
		/*
		 * Don't try to export vectors, frame references, or
		 * measurements.
		 */
		break;
	}
}


static void geda_module(FILE *file, const struct pkg *pkg, time_t now)
{
	enum inst_prio prio;
	const struct inst *inst;

	fprintf(file, "# Footprint generated by FPED utility\n");
	fprintf(file, "Element[\"\" \"%s\" \"\" \"\" 0 0 -25590 -14874 0 100 \"\"]\n", pkg->name);
	fprintf(file, "(\n");

	FOR_INST_PRIOS_UP(prio) {
		for (inst = pkgs->insts[prio]; inst; inst = inst->next)
			geda_inst(file, prio, inst);
		for (inst = pkg->insts[prio]; inst; inst = inst->next)
			geda_inst(file, prio, inst);
	}

	fprintf(file, ")\n\n"); /* extra newline between elements */
}


int geda(FILE *file, const char *one)
{
	const struct pkg *pkg;
	time_t now = time(NULL);

	assert(!one);

	geda_layout_header(file); /* we place one or more elements in a layout file */

	for (pkg = pkgs; pkg; pkg = pkg->next)
		if (pkg->name)
			fprintf(file, "# %s\n", pkg->name);

	for (pkg = pkgs; pkg; pkg = pkg->next)
		if (pkg->name)
			geda_module(file, pkg, now);

	geda_layout_footer(file);

	fflush(file);
	return !ferror(file);
}