diff --git a/modules/INFO b/modules/INFO index b15b612..65f7f32 100644 --- a/modules/INFO +++ b/modules/INFO @@ -5,18 +5,50 @@ # N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F) # -# Standard rectangular passive components -F: stdpass - -# Solder pads and test points -F: pads - # Printed 8:10 card contacs F: 8_10-card +# EUS (R-PDSS-T6) +F: eus +# +# - for example: the PTH04000WAH data sheet, it's EUS +# http://www.ti.com/lit/ds/symlink/pth04000w.pdf +# + # Fiducial (1 mm copper pad, 2 mm solder mask clearance) F: fiducial +# IR Receiver Module +F: ir +# +# From Vishay: +# +# - the TSOP322.., TSOP324.., TSOP348.., TSOP344.. data sheet +# http://www.vishay.com/docs/81732/tsop348.pdf + +# MDIP +F: mdip +# +# From FAIRCHILD: +# +# - the 6N138S data sheet +# http://www.fairchildsemi.com/ds/6N/6N138.pdf +# +# Package Type: +# +# - MDIP 8L +# http://www.fairchildsemi.com/package/packageDetails.html?id=PN_192-B08 +# +# Package Drawing: +# +# http://www.fairchildsemi.com/dwg/N0/N08H.pdf + +# Mini-USB B receptable (SMT; almost generic) +F: mini_usb_b + +# Solder pads and test points +F: pads + # "Generic" simple QFN F: qfn # @@ -78,30 +110,28 @@ F: qfp # http://pdfserv.maxim-ic.com/land_patterns/90-0093.PDF # -# Mini-USB B receptable (SMT; almost generic) -F: mini_usb_b +# SOIC +F: soic +# +# From TI: +# +# - the SN75HVD12DR data sheet +# http://www.ti.com/lit/ds/symlink/sn75hvd12.pdf +# +# Package Drawing: +# +# - D(JEDEC) +# - R-PDSO-G8 +# http://www-s.ti.com/sc/psheets/msoi002j/msoi002j.pdf +# - R-PDSO-G14 +# http://www-s.ti.com/sc/psheets/mpds177g/mpds177g.pdf +# - R-PDSO-G16 +# http://www-s.ti.com/sc/psheets/mpds178g/mpds178g.pdf -# USB A plug for SMT -# -# Note: the signal pads are enlarged by 0.2 mm and their center is shifted by -# 0.1 mm with respect to the reference. -# -# According to the data sheet, the leads terminate at (2.00+/-0.10 mm)/2+ -# 2.48 mm = 3.48+/-0.10 mm from the center. The reference footprint puts the -# edge of the pads at (2.00+/-0.10 mm)/2+2.6 mm = 3.6 mm+/-0.10 mm, so the -# maximum lead end could be at 3.58 mm while the minimum pad edge could be at -# 3.5 mm. -# -# Assuming that the pad is intended to extend a bit beyond the lead, we need -# to add 0.2 mm to compensate for these tolerances. (The pad tolerance may not -# be intended to be used this way, however, we still have to consider small -# errors in registration, which also amount to about 0.1 mm, so the calculation -# remains valid.) -# -F: usb_a_plug_smt +F: sot -# USB 2.0 from usb_20_040908, page 99 -F: usb-a-pcb +# Standard rectangular passive components +F: stdpass # SOT-323 package with counter-clockweise or clockwise pin assignment F: sot-323 @@ -125,51 +155,6 @@ F: ssop # # some conflicts with the outline exist -F: sot - -# MDIP -F: mdip -# -# From FAIRCHILD: -# -# - the 6N138S data sheet -# http://www.fairchildsemi.com/ds/6N/6N138.pdf -# -# Package Type: -# -# - MDIP 8L -# http://www.fairchildsemi.com/package/packageDetails.html?id=PN_192-B08 -# -# Package Drawing: -# -# http://www.fairchildsemi.com/dwg/N0/N08H.pdf - -# SOIC -F: soic -# -# From TI: -# -# - the SN75HVD12DR data sheet -# http://www.ti.com/lit/ds/symlink/sn75hvd12.pdf -# -# Package Drawing: -# -# - D(JEDEC) -# - R-PDSO-G8 -# http://www-s.ti.com/sc/psheets/msoi002j/msoi002j.pdf -# - R-PDSO-G14 -# http://www-s.ti.com/sc/psheets/mpds177g/mpds177g.pdf -# - R-PDSO-G16 -# http://www-s.ti.com/sc/psheets/mpds178g/mpds178g.pdf - -# IR Receiver Module -F: ir -# -# From Vishay: -# -# - the TSOP322.., TSOP324.., TSOP348.., TSOP344.. data sheet -# http://www.vishay.com/docs/81732/tsop348.pdf - # "Generic" simple TSOP F: tsop # @@ -203,3 +188,26 @@ F: to-252 # http://www.national.com/packaging/mkt/td03b.pdf # +# USB A plug for SMT +# +# Note: the signal pads are enlarged by 0.2 mm and their center is shifted by +# 0.1 mm with respect to the reference. +# +# According to the data sheet, the leads terminate at (2.00+/-0.10 mm)/2+ +# 2.48 mm = 3.48+/-0.10 mm from the center. The reference footprint puts the +# edge of the pads at (2.00+/-0.10 mm)/2+2.6 mm = 3.6 mm+/-0.10 mm, so the +# maximum lead end could be at 3.58 mm while the minimum pad edge could be at +# 3.5 mm. +# +# Assuming that the pad is intended to extend a bit beyond the lead, we need +# to add 0.2 mm to compensate for these tolerances. (The pad tolerance may not +# be intended to be used this way, however, we still have to consider small +# errors in registration, which also amount to about 0.1 mm, so the calculation +# remains valid.) +# +F: usb_a_plug_smt + +# USB 2.0 from usb_20_040908, page 99 +F: usb-a-pcb + +