qi-hardware/kicad-libs
1
0
Fork 0
mirror of git://projects.qi-hardware.com/kicad-libs.git synced 2024-12-27 11:51:45 +02:00
Code
af3a20c178
kicad-libs/modules/INFO

580 lines
17 KiB
Plaintext
Raw Blame History

#
# Tags:
#
# F Footprint name (must be first)
# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
#
# Printed 8:10 card contacs
F: 8_10-card
# Open clip for AA batteries, through-hole
# http://www.memoryprotectiondevices.com/datasheets/BK-92-datasheet.pdf
# Note: should generalize this for AAA and maybe also larger sizes
F: bat-clip-aa-th
# 8:10 Card Socket Connectors RIGHT ANGLE SMT Hinge Type
F: 8_10-socket-ra
#
# - 8:10-SOCKET-RA, package drawing, land pattern
# for example MOLEX 500901-0801
# http://www.molex.com/pdm_docs/sd/5009010801_sd.pdf
#
# BGA
F: bga
# - 484-Pin FineLine BGA(FBGA), from Altera
# http://www.altera.com/devicepackaging/04R00416-02.pdf
#
# - FG(G)484 Fine-Pitch BGA, from Xilinx
# http://www.xilinx.com/support/documentation/user_guides/ug385.pdf
#
# Chip SMD Aluminum Electrolytic Capacitors
F: c-smd
#
# for example 10TZV220M6.3X8 from RUBYCON
#
# - c-smd-5mmx6.1mm, c-smd-6.3mmx8mm, c-smd-8mmx10.5mm, c-smd-10mmx10.5mm
#
# package drawing
# http://www.rubycon.co.jp/en/catalog/e_pdfs/aluminum/e_TZV.pdf
#
# land pattern
# http://www.rubycon.co.jp/en/catalog/e_pdfs/aluminum/Chip_Alumi_Eng.pdf
#
# Chip SMD Tantalum Capacitors
F: c-t-smd
#
# for example T520B157M006ATE070 from KEMET
#
# - TC-$Case-$EIA-$Density
# the density is based on the conditions outlined in IPC standard 7351 (IPC-7351).
#
# package drawing ( page 62 ), land pattern ( page 73 )
# http://www.kemet.com/kemet/web/homepage/kechome.nsf/vapubfiles/KEM_TC102_LOWESR.pdf/$file/KEM_TC102_LOWESR.pdf
#
# SOCKET, PCB, DC POWER JACK
F: dcjack
#
# - DCJACK-${L}x${W}, package drawing, land pattern
# for example SCPRE SCD441CPS011B00G
# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/Supply/SCD441CPS011B00G.pdf
#
# SOCKET, DIN, PCB, 180, 5PIN, 5WAYS, 45 DEGREE
F: din-5
#
# - DIN-SOCKET-PCB-5-45, package drawing, land pattern
# for example DELTRON 671-0500
# http://www.farnell.com/datasheets/65433.pdf
#
# DO-214
F: do-214
#
# - DO-214AA(SMB), from Fairchild, for example its 2N7002MTF uses it
# http://www.fairchildsemi.com/dwg/DO/DO214AA.pdf
#
# - DO-214AB(SMC), from Fairchild
# http://www.fairchildsemi.com/dwg/DO/DO214AB.pdf
#
# - DO-214AC(SMA), from Fairchild
# http://www.fairchildsemi.com/dwg/DO/DO214AC.pdf
#
# CONN RECEPT ANALOG DIGITAL DVI RIGHT ANGLE
F: dvi-recept-ra
#
# - DVI-RECEPT-RA, package drawing, land pattern
# for example MOLEX 74320-1004
# http://www.molex.com/pdm_docs/sd/743201004_sd.pdf
#
# EUS (R-PDSS-T6)
F: eus
#
# - for example: the PTH04000WAH data sheet, it's EUS
# http://www.ti.com/lit/ds/symlink/pth04000w.pdf
#
# Fiducial (1 mm copper pad, 2 mm solder mask clearance)
F: fiducial
# 2 rows of Header with outline for through hole type
F: he-2row-dip
#
# - HE-${n}x2-${px}: for example FCI: the 87606-310LF data sheet, package drawing
# http://portal.fciconnect.com/res/en/pdffiles/doc_search/87606.pdf
#
# generic header through hole type
F: header
#
# - HDR-${C}x${R}-$P
# C --> column number
# R --> row number
# P --> pitch
#
# Header with outline for shrouded wafer for example, SMD type
F: he-shrouded
#
# - he-shrouded-${n}x2pins-${pitch}: for example Molex: the 87832-1420 data sheet, package drawing
# http://www.molex.com/pdm_docs/sd/878321420_sd.pdf
#
# IR Receiver Module
F: ir
#
# From Vishay:
#
# - the TSOP322.., TSOP324.., TSOP348.., TSOP344.. data sheet
# http://www.vishay.com/docs/81732/tsop348.pdf
# LED right angle package
F: ledsmd
#
# - LEDSMD-0603R: for example: the APA1606SURCK data sheet, package drawing
# http://www.us.kingbright.com/images/catalog/SPEC/APA1606SURCK.pdf
# added a letter 'R' stands for right angle land pattern
# could expand it as else land pattern for 0603, 0805, 0805R, etc.
#
# MDIP
F: mdip
#
# From FAIRCHILD:
#
# - the 6N138S data sheet
# http://www.fairchildsemi.com/ds/6N/6N138.pdf
#
# Package Type:
#
# - MDIP 8L
# http://www.fairchildsemi.com/package/packageDetails.html?id=PN_192-B08
#
# Package Drawing:
#
# http://www.fairchildsemi.com/dwg/N0/N08H.pdf
# Small Size 2.4 GHz PCB Antenna
# http://focus.ti.com/lit/an/swra117d/swra117d.pdf
F: meander-2.4GHz
# Microphone, through hole type, bent pins
F: mic-ra-dip
#
# - MIC-RA-DIP-${Dia}x${Height}: for example PRO SIGNAL the MP33125 data sheet, package drawing
# http://www.farnell.com/datasheets/359234.pdf
# be noted that placements of two pins based on bending pins to suitable right angle purpose.
# the py# is the option to change to distance that you want.
#
# Mini-USB B receptable (SMT; almost generic)
F: mini_usb_b
# Solder pads and test points
F: pads
#
# - PAD_${type}_$size
# type --> C: circle, R: round, S: square
# size --> dimension
#
# "pads" in typical array formations
F: pads-array
# "Generic" simple QFN
F: qfn
#
# The information for these packages comes from various sources:
#
# - the C8051F326 data sheet, for the QFN28 footprint (N: mcu)
# - the AT86F326 data sheet, for the QFN32 package dimensions (N: txrx)
# - Atmel's general recommendations for QFN land patterns (N: atmel-qfn)
# - NXP's SOT617-1 and SOT617-3, for package and land pattern:
# http://www.nxp.com/package/SOT617-1.html
# http://www.nxp.com/package/SOT617-3.html
#
# Solder paste:
#
# Footprint Center pad Closest NXP (with complete land pattern)
# QFN28-Atmel 2.4 mm for further study
# QFN28-SiLabs 3.3 mm use SiLab's specification
# QFN32-VHHD-2 3.7 mm between SOT818-1 and SOT788-1
# QFN32-VHHD-6 3.4 mm SOT818-1
#
# From NXP:
#
# Package Pad Paste zone Islands Isl. size Isl. gap
# SiLabs 3.25 3.1 3 x 3 0.9
# SOT818-1 3.4 1.75 2 x 2 0.75 0.25
# SOT788-1 4.0 2.4 3 x 3 0.6 0.3
#
# NXP rules (AN10365):
# - paste zone = 35% of pad area
# - paste coverge = 20% of pad area
#
# Our parameters:
#
# Package Pad Paste zone Islands Isl. size Isl. gap Zone Coverage
# QFN32-VHHD-2 3.7 2.15 3 x 3 0.55 0.25 34% 20%
# QFN32-VHHD-6 3.4 1.95 2 x 2 0.75 0.45 33% 19%
#
# Known bugs:
#
# - really ought to merge all the various QFN definitions (we have more
# over at gta02-core) into a single QFN file with a big mean table of
# everything
#
N: sot617-3-lp
# "Generic" simple QFP (for now, just for Silabs' C8051F320)
F: qfp
#
# - the C8051F320 data sheet
# http://www.silabs.com/Support%20Documents/TechnicalDocs/C8051F32x.pdf
#
# according to MAXIM web: http://www.maxim-ic.com/design/packaging/
# the LQPF48/TQFP48 referred to the same package drawing and land pattern
#
# - LQFP48, TQFP48: C48 -> ackage drawping
# http://pdfserv.maxim-ic.com/package_dwgs/21-0054.PDF
#
# - LQFP48, TQFP48: C48 -> package land pattern
# http://pdfserv.maxim-ic.com/land_patterns/90-0093.PDF
#
# - LQFP64, JEDEC MS-026-BCD for example: the ADV7181CBSTZ data sheet, package drawing
# http://www.analog.com/static/imported-files/data_sheets/ADV7181C.pdf
#
# - LQFP64, C64 -> package drawing
# http://pdfserv.maxim-ic.com/package_dwgs/21-0083.PDF
#
# - LQFP64, C64 -> package land pattern
# http://pdfserv.maxim-ic.com/land_patterns/90-0141.PDF
#
# comparisons of pads dimension of WM9707, KS8001, ADV7125
#
# MIN NOM MAX chip
# "b" 0.17mm 0.22mm 0.27mm WM9707
# 0.19mm 0.22mm 0.25mm KS8001
# 0.17mm 0.22mm 0.27mm ADV7125
# "L" 0.45mm 0.6mm 0.75mm WM9707
# 0.5mm 0.6mm 0.7mm KS8001
# 0.45mm 0.6mm 0.75mm ADV7125
#
# so a combination of both ackage drawping and land pattern from Maxim
# the lad pattern for QFP48 is 0.27mm for "b", 1.45mm for "L"
# it should be safe.
#
# 3.5mm audio stereo phone jack
F: phonejack
#
# phonejack-${size}-${N}
# From SCPRE:
#
# - phonejack-3.5-5, the SCJ368R1NUS0B00G data sheet, drawing
# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/Audio/SCJ368R1NUS0B00G.pdf
#
# CONN RCA JACK 3-CONs RIGHT ANGLE
F: rca-3-ra
#
# - RCA-3-RA, package drawing, land pattern
# for example SCPRE SCP662CNS257U00G
# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/VideoIn/SCP662CNS257U00G.pdf
#
# RJ45, 8 pins, two leds
F: rj45
#
# - RJ45-8-LED, the 48025-0002 data sheet, drawing, from MOLEX
# http://www.molex.com/pdm_docs/sd/480250002_sd.pdf
#
# SOIC
F: soic
#
# From TI:
#
# - the SN75HVD12DR data sheet
# http://www.ti.com/lit/ds/symlink/sn75hvd12.pdf
#
# Package Drawing:
#
# - D(JEDEC)
# - R-PDSO-G8
# http://www-s.ti.com/sc/psheets/msoi002j/msoi002j.pdf
# - R-PDSO-G14
# http://www-s.ti.com/sc/psheets/mpds177g/mpds177g.pdf
# - R-PDSO-G16
# http://www-s.ti.com/sc/psheets/mpds178g/mpds178g.pdf
# SOT generic package
F: sot
# experimental generic SOT footprint; currently only for
#
# - SOT-235, for example, TI SOT-23, DBV(R-PDSO-G5) package
# http://www.ti.com/lit/ds/symlink/tps76301.pdf
# - SOT-323 aka SC-70
# http://www.onsemi.com/pub_link/Collateral/BAV99WT1-D.PDF
# - SOT-363 aka SC-88 aka SC-70-6
# http://www.onsemi.com/pub_link/Collateral/MBT3946DW1T1-D.PDF
# - SOT-523
# http://www.diodes.com/datasheets/ds31784.pdf
# - SOT-563
# http://www.onsemi.com/pub_link/Collateral/NTZD3155C-D.PDF
#
# some conflicts with the outline exist
# SOT23 generic package with counter-clockweise or clockwise pin assignment
F: sot23
#
# - SOT23: aka JEDEC TO-236 for example, the APX803-40SAG-7 data sheet, package drawing and land pattern
# http://www.diodes.com/datasheets/APX803.pdf
#
# for another example from Fairchildsemi 2N7002MTF, package drawing and land pattern
# http://www.fairchildsemi.com/dwg/MA/MA03D.pdf
#
# Standard rectangular passive components
F: stdpass
#
# packages: 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512
# polarized(marked the cathode) packages: starts from 0603P to 2512P
#
# be noticed that 1812 land pattern based on a p/n: miniSMDC200F from Tycoelectronics
# http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Catalog+Section%7FSURFACE-MOUNT%7FA1%7Fpdf%7FEnglish%7FENG_CS_SURFACE-MOUNT_A1.pdf%7FRF1410-000
#
# SOT-323 package with counter-clockweise or clockwise pin assignment
F: sot-323
N: mmst3904
# http://www.nxp.com/#/page/content=[f=/packages/SOT341-1.xml]
# http://www.nxp.com/packages/SOT341-1.html
# http://www.nxp.com/documents/reflow_soldering/SSOP-TSSOP-VSO-REFLOW.pdf
# mechanical mounting holes
F: spacer
#
# - SPACER-$nominal-$disc-$keepout$type
# nominal --> hole dia.
# disc --> copper dia.
# keepout --> keepout dia.
# type --> "-BARE" : no copper area
# --> "" : with copper area
#
# "Generic" simple SSOP
F: ssop
#
# - TSSOP14: for example: the MIC2550AYTS data sheet, package drawing
# http://www.micrel.com/_PDF/mic2550a.pdf
#
# - TSSOP14: from NXP -> package land pattern
# http://www.nxp.com/packages/SOT402-1.html
# http://www.nxp.com/documents/reflow_soldering/sot402-1_fr.pdf
# SWITCH, TACTILE, SPST, R/A, THROUGH HOLE
F: tactile-sw-spst-ra-dip.fpd
#
# - TACTIL-SW-${TYPE}-RA-${A}-${B}, package drawing, land pattern
# for example TYCO ELECTRONICS FSMRA2JH
# http://www.farnell.com/datasheets/51343.pdf
#
# "Generic" simple TO-252, TO-263
F: to
#
# - TO-252 for example: the LP38690DT-3.3 data sheet, it's TO-252
# http://www.ti.com/lit/ds/symlink/lp38690.pdf
#
# - JEDEC Spec: TO-252 AA -> package drawing and land pattern
# http://www.national.com/packaging/mkt/td03b.pdf
#
# - TO-263 for example: the LP38511TJ-ADJ/NOPB data sheet, it's TO-263
# http://www.ti.com/lit/ds/symlink/lp38511-adj.pdf
#
# - JEDEC Spec: TO-263 THIN -> package drawing and land pattern
# http://www.national.com/packaging/mkt/tj5a.pdf
#
# "Generic" simple TSOP
F: tsop
#
# - TSOP28: Z28 -> package drawing
# http://pdfserv.maxim-ic.com/package_dwgs/21-0273.PDF
#
# - TSOP28: Z28 -> package land pattern
# http://pdfserv.maxim-ic.com/land_patterns/90-0319.PDF
#
# according to MAXIM web: http://www.maxim-ic.com/design/packaging/
# the TSOP32 referred to the same package drawing and land pattern
#
# - TSOP32: Z32 -> package drawing
# http://pdfserv.maxim-ic.com/package_dwgs/21-0274.PDF
#
# - TSOP32: Z32 -> package land pattern
# http://pdfserv.maxim-ic.com/land_patterns/90-0320.PDF
#
# - TSOP56: the JS28F256J3F105 data sheet, it's TSOP-56
# http://www.micron.com/parts/nor-flash/parallel-nor-flash/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/6062319942_J3_65_256M_MLC_DS.ashx
#
# - TSOP66: for example: the MT46V32M16P-5B:F data sheet, it's 400 mil, package drawing
# http://download.micron.com/pdf/datasheets/dram/ddr/512MBDDRx4x8x16.pdf
#
# - TSOP66: currently referred to M1rc3 design files land pattern:
# width of pad -> 0.4 mm, it's rectangle not round one
# length of pad -> 1.25 mm
# Width of body -> 400 mil
# TSSOP5 for NXP
F: tssop5
#
# - TSSOP5 aka for example package drawing SOT353-1 from NXP 74AUP1G08GW data sheet,
# http://www.nxp.com/documents/data_sheet/74AUP1G08.pdf
# http://www.nxp.com/packages/SOT353-1.html
# but without real land pattern found, still could refer link below for more in details:
# http://www.nxp.com/documents/application_note/AN10365.pdf
#
# also check OnSemi's MC74VHC1G135-D http://www.onsemi.cn/pub_link/Collateral/MC74VHC1G135-D.PDF for SOT-353
# they both TSSOP5(NXP) and SOT-353(OnSemi) are quite similar. OnSemi has land pattern for it.
#
# NXP's Lp is 0.46 mm in max., OnSemi's K is 0.3 mm max. with a land pattern of pad length 0.5 mm.
# could use a land pattern of pad length to be 0.7 mm.
#
# USB DUAL STACKED A RECEPT CON R/A
# F: usb-a-dual-recept-r
#
# - USB-A-DUAL-RECEPT-RA, package drawing, land pattern
# for example MOLEX 67298-4090
# http://www.molex.com/pdm_docs/sd/672984090_sd.pdf
#
# USB A plug for SMT
#
# Note: the signal pads are enlarged by 0.2 mm and their center is shifted by
# 0.1 mm with respect to the reference.
#
# According to the data sheet, the leads terminate at (2.00+/-0.10 mm)/2+
# 2.48 mm = 3.48+/-0.10 mm from the center. The reference footprint puts the
# edge of the pads at (2.00+/-0.10 mm)/2+2.6 mm = 3.6 mm+/-0.10 mm, so the
# maximum lead end could be at 3.58 mm while the minimum pad edge could be at
# 3.5 mm.
#
# Assuming that the pad is intended to extend a bit beyond the lead, we need
# to add 0.2 mm to compensate for these tolerances. (The pad tolerance may not
# be intended to be used this way, however, we still have to consider small
# errors in registration, which also amount to about 0.1 mm, so the calculation
# remains valid.)
#
F: usb_a_plug_smt
# USB 2.0 from usb_20_040908, page 99
F: usb-a-pcb
# XLR, SOCKET, PANEL, HORIZ/PCB
F: xlr-socket
#
# - XLR-PANEL-HORIZ/PCB-SOCKET, package drawing, land pattern
# for example NEUTRIK NC3FAH1
# http://www.neutrik.us/en-us/xlr/a-series/nc3fah1
#
# XLR, PLUG, PANEL, HORIZ/PCB
F: xlr-plug
#
# - XLR-PANEL-HORIZ/PCB-PLUG, package drawing, land pattern
# for example NEUTRIK NC3MAH
# http://www.neutrik.us/en-us/xlr/a-series/nc3mah
#
# 2-pins rectangular smd xtal
F: xtal-2
#
# - xtal2-11.5mmx4.83mm package drawing, land pattern
# for example R49SSA-028636-F20-YYY-YQA
# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/VideoIn/Qi%20R49SSA-028636-F20-YYY-YQA.pdf
#
# 4-pins rectangular smd xtal
F: xtal-4
#
# - xtal4-3.2mmx2.5mm package drawing, land pattern
# for example NX3225SA
# http://www.ndk.com/images/products/catalog/c_NX3225SA-STD-CSQ-1_e.pdf
#
# - xtal4-5mmx3.2mm package drawing, land pattern
# for example SO5032-050000-O3A-BBE-QA
# http://downloads.qi-hardware.com/hardware/milkymist_one/datasheet/FPGA/Qi%20Hardware%20SO5032-050000-O3A-BBE-QA.pdf
#
# - xtal4-6mmx3.6mm package drawing, land pattern
# for example ABMM2-24.576MHZ-E2-T
# http://www.abracon.com/Resonators/ABMM2.pdf
#
# DIP4 component in a DIP6 socket
F: dip4of6
#
# The smallest DIP socket commonly available is DIP6, but there are some
# components that come in a DIP4 package.
#
# Micro-USB B receptacle, standard (bottom) mount (all SMT, no posts)
F: zx62-b-5pa
#
# Hirose ZX62-B-5PA(11)
# http://www.hirose.co.jp/cataloge_hp/e24200011.pdf
#
# Compatible (front pads are slightly narrower in recommended footprint):
# FCI 10118192-0001LF
# http://portal.fciconnect.com/Comergent//fci/drawing/10118192.pdf
#
# Micro-USB B receptacle, mid-mount (all SMT, no posts)
F: zx62m-b-5p
#
# Known issue:
# Rear side pads should have an empty corner. Right now, we even print silk
# screen on them.
#
# Hirose ZX62M-B-5P(01)
# http://www.hirose.co.jp/cataloge_hp/e24200011.pdf
#
# E-SWITCH series 320 tact switch
F: e-switch320
#
# http://www.e-switch.com/Portals/0/Series_Pdf/320.pdf
#
# Similar:
#
# http://www.ck-components.com/index.php?module=media&action=Display&cmpref=13325&lang=en&width=&height=&format=&alt=
#
# ST LGA patterns (e.g., LGA-3x3-16 for LIS3DH)
F: LGA
#
# http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/TECHNICAL_NOTE/CD00134799.pdf
#
# Instead of using an asymmetric solder mask opening, we make the pads a bit
# larger on the outside. That way, the solder mask opens as well, plut the
# pads can be reached with a soldering iron.
#
F: 8_10-SOCKET-RA-PUSH-PULL
#
# http://media.digikey.com/pdf/Data%20Sheets/Amphenol%20PDFs/114-00841-68.pdf
#
F: INDUCTOR-2P-3mmx3mm
#
# http://www.bourns.com/data/global/pdfs/SRN3015.pdf
#
View Git Blame Copy Permalink