qi-hardware/m1
1
0
Fork 0
mirror of git://projects.qi-hardware.com/m1.git synced 2024-11-16 16:41:36 +02:00
Code
87b791d5de
m1/usb_jtag.brd

5862 lines
111 KiB
Plaintext
Raw Normal View History

Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
PCBNEW-BOARD Version 1 date 2010年10月26日 星期二 23时15分33秒
initial import
2010-08-07 18:20:52 +03:00
# Created by Pcbnew(2010-05-05 BZR 2356)-stable
$GENERAL
LayerCount 2
Ly 1FFF8001
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
EnabledLayers 10FF8001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Links 148
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
NoConn 0
Di 30150 38657 51210 51872
Ndraw 8
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ntrack 734
initial import
2010-08-07 18:20:52 +03:00
Nzone 0
BoardThickness 630
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Nmodule 55
Nnets 37
initial import
2010-08-07 18:20:52 +03:00
$EndGENERAL
$SHEETDESCR
Sheet A4 11700 8267
Title ""
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Date "26 oct 2010"
initial import
2010-08-07 18:20:52 +03:00
Rev ""
Comp ""
Comment1 ""
Comment2 ""
Comment3 ""
Comment4 ""
$EndSHEETDESCR
$SETUP
InternalUnit 0.000100 INCH
ZoneGridSize 250
Layers 2
Layer[0] Back signal
Layer[15] Front signal
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
TrackWidth 60
TrackClearence 60
initial import
2010-08-07 18:20:52 +03:00
ZoneClearence 200
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
TrackMinWidth 60
initial import
2010-08-07 18:20:52 +03:00
DrawSegmWidth 150
EdgeSegmWidth 150
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
ViaSize 220
ViaDrill 120
ViaMinSize 220
ViaMinDrill 120
ViaSizeList 300 180
initial import
2010-08-07 18:20:52 +03:00
MicroViaSize 200
MicroViaDrill 50
MicroViasAllowed 0
MicroViaMinSize 200
MicroViaMinDrill 50
TextPcbWidth 120
TextPcbSize 600 800
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
EdgeModWidth 30
initial import
2010-08-07 18:20:52 +03:00
TextModSize 600 600
TextModWidth 120
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
PadSize 591 591
PadDrill 354
initial import
2010-08-07 18:20:52 +03:00
Pad2MaskClearance 100
AuxiliaryAxisOrg 0 0
$EndSETUP
$EQUIPOT
Na 0 ""
St ~
$EndEQUIPOT
$EQUIPOT
Na 1 "+1.8V"
St ~
$EndEQUIPOT
$EQUIPOT
Na 2 "+3.3V"
St ~
$EndEQUIPOT
$EQUIPOT
Na 3 "+5V"
St ~
$EndEQUIPOT
$EQUIPOT
Na 4 "/D+"
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 5 "/EECS"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 6 "/EEDATA"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 7 "/EESK"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 8 "/RXD"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 9 "/TCK"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 10 "/TDI"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 11 "/TMS"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 12 "/TXD"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 13 "/T_TCK"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 14 "/T_TDI"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 15 "/T_TDO"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 16 "/T_TMS"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 17 "/USB_DM"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 18 "/VBUS"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 19 "/VUART"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 20 "GND"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 21 "N-000029"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 22 "N-000030"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 23 "N-000031"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 24 "N-000032"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 25 "N-000038"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 26 "N-000039"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 27 "N-000040"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 28 "N-000049"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 29 "N-000052"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 30 "N-000054"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 31 "N-000055"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 32 "N-000062"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 33 "N-000065"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 34 "N-000066"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 35 "N-000074"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$EQUIPOT
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Na 36 "VCOM"
initial import
2010-08-07 18:20:52 +03:00
St ~
$EndEQUIPOT
$NCLASS
Name "Default"
Desc "This is the default net class."
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Clearance 60
TrackWidth 60
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
ViaDia 220
ViaDrill 120
initial import
2010-08-07 18:20:52 +03:00
uViaDia 200
uViaDrill 50
AddNet ""
AddNet "/D+"
AddNet "/EECS"
AddNet "/EEDATA"
AddNet "/EESK"
AddNet "/RXD"
AddNet "/TCK"
AddNet "/TDI"
AddNet "/TMS"
AddNet "/TXD"
AddNet "/T_TCK"
AddNet "/T_TDI"
AddNet "/T_TDO"
AddNet "/T_TMS"
AddNet "/USB_DM"
AddNet "/VUART"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
AddNet "N-000029"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AddNet "N-000030"
AddNet "N-000031"
AddNet "N-000032"
AddNet "N-000038"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
AddNet "N-000039"
AddNet "N-000040"
AddNet "N-000049"
AddNet "N-000054"
initial import
2010-08-07 18:20:52 +03:00
AddNet "N-000055"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
AddNet "N-000062"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AddNet "N-000065"
initial import
2010-08-07 18:20:52 +03:00
AddNet "N-000066"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
AddNet "N-000074"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
$EndNCLASS
$NCLASS
Name "POWER"
Desc ""
Clearance 60
TrackWidth 200
ViaDia 350
ViaDrill 250
uViaDia 200
uViaDrill 50
AddNet "+5V"
AddNet "/VBUS"
$EndNCLASS
$NCLASS
Name "Power-s"
Desc ""
Clearance 60
TrackWidth 100
ViaDia 220
ViaDrill 120
uViaDia 200
uViaDrill 50
AddNet "+1.8V"
AddNet "+3.3V"
AddNet "GND"
AddNet "N-000052"
initial import
2010-08-07 18:20:52 +03:00
AddNet "VCOM"
$EndNCLASS
$MODULE LED-0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46080 40080 1800 15 4C80FCA4 4C62D733 ~~
initial import
2010-08-07 18:20:52 +03:00
Li LED-0603
Cd LED 0603 smd package
Kw LED led 0603 SMD smd SMT smt smdled SMDLED smtled SMTLED
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D733
initial import
2010-08-07 18:20:52 +03:00
AR /4C3F1118
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -22 356 300 300 1800 35 N V 21 N"D2"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 -1660 240 300 300 1800 35 N I 21 N"LED"
initial import
2010-08-07 18:20:52 +03:00
DS 177 -177 177 177 26 21
DS 177 177 334 177 26 21
DS 334 -177 334 177 26 21
DS 177 -177 334 -177 26 21
DS -334 -177 -334 177 26 21
DS -334 177 -177 177 26 21
DS -177 -177 -177 177 26 21
DS -334 -177 -177 -177 26 21
DS 0 -177 0 -118 26 21
DS 0 -118 118 -118 26 21
DS 118 -177 118 -118 26 21
DS 0 -177 118 -177 26 21
DS 0 118 0 177 26 21
DS 0 177 118 177 26 21
DS 118 118 118 177 26 21
DS 0 118 118 118 26 21
DS 0 -59 0 59 26 21
DS 0 59 118 59 26 21
DS 118 -59 118 59 26 21
DS 0 -59 118 -59 26 21
DS 177 -157 -177 -157 40 21
DS 177 157 -177 157 40 21
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 314 314 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 23 "N-000031"
initial import
2010-08-07 18:20:52 +03:00
Po -295 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 314 314 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
initial import
2010-08-07 18:20:52 +03:00
Po 295 0
$EndPAD
$EndMODULE LED-0603
$MODULE LED-0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 45800 50350 900 15 4C6C0D7F 4C62D735 ~~
initial import
2010-08-07 18:20:52 +03:00
Li LED-0603
Cd LED 0603 smd package
Kw LED led 0603 SMD smd SMT smt smdled SMDLED smtled SMTLED
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D735
initial import
2010-08-07 18:20:52 +03:00
AR /4C583140
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 690 0 300 300 1800 35 N V 21 N"D3"
T1 -80 1960 300 300 900 35 N I 21 N"LED"
initial import
2010-08-07 18:20:52 +03:00
DS 177 -177 177 177 26 21
DS 177 177 334 177 26 21
DS 334 -177 334 177 26 21
DS 177 -177 334 -177 26 21
DS -334 -177 -334 177 26 21
DS -334 177 -177 177 26 21
DS -177 -177 -177 177 26 21
DS -334 -177 -177 -177 26 21
DS 0 -177 0 -118 26 21
DS 0 -118 118 -118 26 21
DS 118 -177 118 -118 26 21
DS 0 -177 118 -177 26 21
DS 0 118 0 177 26 21
DS 0 177 118 177 26 21
DS 118 118 118 177 26 21
DS 0 118 118 118 26 21
DS 0 -59 0 59 26 21
DS 0 59 118 59 26 21
DS 118 -59 118 59 26 21
DS 0 -59 118 -59 26 21
DS 177 -157 -177 -157 40 21
DS 177 157 -177 157 40 21
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 314 314 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po -295 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 314 314 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 26 "N-000039"
initial import
2010-08-07 18:20:52 +03:00
Po 295 0
$EndPAD
$EndMODULE LED-0603
$MODULE LED-0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 45300 50350 900 15 4C70BE4C 4C62D737 ~~
initial import
2010-08-07 18:20:52 +03:00
Li LED-0603
Cd LED 0603 smd package
Kw LED led 0603 SMD smd SMT smt smdled SMDLED smtled SMTLED
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D737
initial import
2010-08-07 18:20:52 +03:00
AR /4C5831C4
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 680 -90 300 300 1800 35 N V 21 N"D4"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 -150 3960 300 300 900 35 N I 21 N"LED"
initial import
2010-08-07 18:20:52 +03:00
DS 177 -177 177 177 26 21
DS 177 177 334 177 26 21
DS 334 -177 334 177 26 21
DS 177 -177 334 -177 26 21
DS -334 -177 -334 177 26 21
DS -334 177 -177 177 26 21
DS -177 -177 -177 177 26 21
DS -334 -177 -177 -177 26 21
DS 0 -177 0 -118 26 21
DS 0 -118 118 -118 26 21
DS 118 -177 118 -118 26 21
DS 0 -177 118 -177 26 21
DS 0 118 0 177 26 21
DS 0 177 118 177 26 21
DS 118 118 118 177 26 21
DS 0 118 118 118 26 21
DS 0 -59 0 59 26 21
DS 0 59 118 59 26 21
DS 118 -59 118 59 26 21
DS 0 -59 118 -59 26 21
DS 177 -157 -177 -157 40 21
DS 177 157 -177 157 40 21
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 314 314 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po -295 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 314 314 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 33 "N-000065"
initial import
2010-08-07 18:20:52 +03:00
Po 295 0
$EndPAD
$EndMODULE LED-0603
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$MODULE QFN_64
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43530 44490 1800 15 4C6FDD0C 4C62D738 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li QFN_64
Sc 4C62D738
AR /4C3F0230
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 3260 -3870 280 180 1800 45 N V 21 N"U5"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 10490 2090 600 600 1800 120 N I 21 N"FT2232HQ"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DC 0 394 59 453 30 21
DS -295 -236 -295 -98 30 21
DS -295 -98 -197 0 30 21
DS -197 0 -59 0 30 21
DS 3248 -3307 3248 -3543 30 21
DS 3248 -3543 3012 -3543 30 21
DS 3012 0 3248 0 30 21
DS 3248 0 3248 -236 30 21
DS -59 -3543 -295 -3543 30 21
DS -295 -3543 -295 -3307 30 21
$PAD
Sh "1" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
$EndPAD
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 29 "N-000052"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 197 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 30 "N-000054"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 394 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 22 "N-000030"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 591 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 787 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "6" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 24 "N-000032"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 984 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "7" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 17 "/USB_DM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1181 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "8" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 4 "/D+"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1378 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "9" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 21 "N-000029"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1575 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "10" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1772 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "11" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1969 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "12" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 1 "+1.8V"
Po 2165 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "13" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2362 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "14" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 28 "N-000049"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2559 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "15" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2756 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "16" R 98 315 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 9 "/TCK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2953 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "17" R 98 315 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 10 "/TDI"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3248 -295
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "18" R 98 315 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 15 "/T_TDO"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3248 -492
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "19" R 98 315 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 11 "/TMS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3248 -689
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "20" R 98 315 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 3248 -886
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "21" R 98 315 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 34 "N-000066"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3248 -1083
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$PAD
Sh "22" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -1280
$EndPAD
$PAD
Sh "23" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -1476
$EndPAD
$PAD
Sh "24" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -1673
$EndPAD
$PAD
Sh "25" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3248 -1870
$EndPAD
$PAD
Sh "26" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -2067
$EndPAD
$PAD
Sh "27" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -2264
$EndPAD
$PAD
Sh "28" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -2461
$EndPAD
$PAD
Sh "29" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -2657
$EndPAD
$PAD
Sh "30" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -2854
$EndPAD
$PAD
Sh "31" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po 3248 -3051
$EndPAD
$PAD
Sh "32" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 3248 -3248
$EndPAD
$PAD
Sh "33" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 2953 -3543
$EndPAD
$PAD
Sh "34" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 2756 -3543
$EndPAD
$PAD
Sh "35" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2559 -3543
$EndPAD
$PAD
Sh "36" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 2362 -3543
$EndPAD
$PAD
Sh "37" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 1 "+1.8V"
Po 2165 -3543
$EndPAD
$PAD
Sh "38" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 12 "/TXD"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1969 -3543
$EndPAD
$PAD
Sh "39" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 8 "/RXD"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1772 -3543
$EndPAD
$PAD
Sh "40" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 1575 -3543
$EndPAD
$PAD
Sh "41" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 1378 -3543
$EndPAD
$PAD
Sh "42" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po 1181 -3543
$EndPAD
$PAD
Sh "43" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 984 -3543
$EndPAD
$PAD
Sh "44" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 787 -3543
$EndPAD
$PAD
Sh "45" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 591 -3543
$EndPAD
$PAD
Sh "46" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 394 -3543
$EndPAD
$PAD
Sh "47" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 197 -3543
$EndPAD
$PAD
Sh "48" R 98 315 0 0 1800
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 0 -3543
$EndPAD
$PAD
Sh "49" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 1 "+1.8V"
Po -295 -3248
$EndPAD
$PAD
Sh "50" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po -295 -3051
$EndPAD
$PAD
Sh "51" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -2854
$EndPAD
$PAD
Sh "52" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -2657
$EndPAD
$PAD
Sh "53" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -2461
$EndPAD
$PAD
Sh "54" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 27 "N-000040"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -2264
$EndPAD
$PAD
Sh "55" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 25 "N-000038"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -2067
$EndPAD
$PAD
Sh "56" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Po -295 -1870
$EndPAD
$PAD
Sh "57" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -1673
$EndPAD
$PAD
Sh "58" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -1476
$EndPAD
$PAD
Sh "59" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -1280
$EndPAD
$PAD
Sh "60" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po -295 -1083
$EndPAD
$PAD
Sh "61" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 6 "/EEDATA"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -886
$EndPAD
$PAD
Sh "62" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 7 "/EESK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -689
$EndPAD
$PAD
Sh "63" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 5 "/EECS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -295 -492
$EndPAD
$PAD
Sh "64" R 98 315 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 1 "+1.8V"
Po -295 -295
$EndPAD
$PAD
Sh "65" R 1713 1713 0 0 2700
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Po 1476 -1772
$EndPAD
$EndMODULE QFN_64
$MODULE SM0402
Po 45110 44440 0 15 4C6D37BE 4C62D73E ~~
Li SM0402
Sc 4C62D73E
AR /4C3D77A1
Op 0 0 0
At SMD
T0 730 20 280 180 0 45 N V 21 N"C1"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 2980 280 280 180 0 45 N I 21 N"33pF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
$PAD
Sh "1" R 181 181 0 0 0
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 29 "N-000052"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
$EndPAD
$PAD
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 43587 43618 900 15 4C6D37DD 4C62D740 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D740
AR /4C3D77A7
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -510 40 280 180 900 45 N V 21 N"C3"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -570 4510 280 180 900 45 N I 21 N"33pF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 30 "N-000054"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 44050 41350 900 15 4C70E163 4C62D746 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D746
AR /4C3D7B71
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 750 -200 280 180 1800 45 N V 21 N"FB1"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 100 -9540 280 180 900 45 N I 21 N"FILTER"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 18 "/VBUS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
$EndPAD
$PAD
Sh "2" R 181 181 0 0 900
Dr 0 0 0
At SMD N 00888000
Ne 3 "+5V"
Po 350 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43370 50010 0 0 4C6D3CE5 4C62D748 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D748
AR /4C3D885F
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -570 -50 280 180 0 45 M V 20 N"R2"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 6630 280 280 180 0 45 M I 20 N"2k2"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$PAD
Sh "1" R 181 181 0 0 0
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 31 "N-000055"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
$EndPAD
$PAD
Sh "2" R 181 181 0 0 0
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 6 "/EEDATA"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46520 48580 0 0 4C6C0D3D 4C8112DD ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sc 4C8112DD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AR /4C3D8DA6
Op 0 0 0
At SMD
T0 200 -370 280 180 0 45 M V 20 N"C10"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 1550 -900 280 180 0 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
$PAD
Sh "1" R 181 181 0 0 0
Dr 0 0 0
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
Dr 0 0 0
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0402
$MODULE SM0402
Po 44710 46950 1800 15 4C6C0CCE 4C62D74C ~~
Li SM0402
Sc 4C62D74C
AR /4C3D91F5
Op 0 0 0
At SMD
T0 -410 -40 280 180 1800 45 N V 21 N"R9"
T1 -3260 780 280 180 1800 45 N I 21 N"220"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
$PAD
Sh "1" R 181 181 0 0 1800
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 33 "N-000065"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
$EndPAD
$PAD
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 27 "N-000040"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 44710 46570 1800 15 4C6C0CC1 4C62D74E ~~
Li SM0402
Sc 4C62D74E
AR /4C3D91F6
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -410 -30 280 180 1800 45 N V 21 N"R7"
T1 -3340 760 280 180 1800 45 N I 21 N"220"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 26 "N-000039"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 25 "N-000038"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43720 49630 1800 0 4C6D3CEF 4C62D750 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D750
AR /4C3DCE45
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 910 80 280 180 1800 45 M V 20 N"R1"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -4670 -1930 280 180 1800 45 M I 20 N"10k"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 31 "N-000055"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46010 41300 0 15 4C80FE03 4C62D752 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D752
AR /4C3DDB88
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 840 944 280 180 0 45 N V 21 N"C15"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 1780 380 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46010 40920 0 15 4C80FE07 4C62D754 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D754
AR /4C3DDB8C
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 840 970 280 180 0 45 N V 21 N"C14"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 1740 1120 280 180 0 45 N I 21 N"2.2uF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 44900 39840 0 15 4C6D3925 4C62D756 ~~
Li SM0402
Sc 4C62D756
AR /4C3DDBB8
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -510 30 280 180 0 45 N V 21 N"C13"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 440 -740 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 3 "+5V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 40810 46180 2700 0 4C70E0F1 4C62D758 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D758
AR /4C3F071D
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 800 -20 280 180 5400 45 M V 20 N"C23"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 110 1830 280 180 2700 45 M I 20 N"100nF"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 42450 48580 0 15 4C72A273 4C72A2E4 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sc 4C72A2E4
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AR /4C3F0726
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 857 140 280 180 0 45 N V 21 N"C24"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 6280 1640 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 44360 47330 0 15 4C72A27B 4C72A2E7 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sc 4C72A2E7
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AR /4C3F0730
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 817 209 280 180 0 45 N V 21 N"C26"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 3920 2110 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 39780 47560 2700 15 4C6D3C91 4C62D75E ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D75E
AR /4C3F0733
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -370 10 280 180 3600 45 N V 21 N"C25"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 230 1460 280 180 2700 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 41250 44940 0 0 4C6D3818 4C62D760 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D760
AR /4C3F0749
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 850 30 280 180 0 45 M V 20 N"C20"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -3130 -730 280 180 0 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 1 "+1.8V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 41360 48570 2700 15 4C70DCA1 4C62D762 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D762
AR /4C3F0761
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 790 -70 280 180 3600 45 N V 21 N"C21"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 860 5850 280 180 2700 45 N I 21 N"100nF"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sh "1" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 1 "+1.8V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sh "2" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 44340 44790 0 15 4C6D37C5 4C62D764 ~~
Li SM0402
Sc 4C62D764
AR /4C3F076E
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 830 80 280 180 0 45 N V 21 N"C22"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 5020 1340 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 1 "+1.8V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 43169 43268 2700 15 4C6C0ED4 4C62D766 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D766
AR /4C3F0927
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 790 -40 280 180 2700 45 N V 21 N"FB3"
T1 -3000 4960 280 180 2700 45 N I 21 N"FILTER"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 22 "N-000030"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 41870 43248 2700 15 4C6C0E0F 4C62D768 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D768
AR /4C3F09B7
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 790 -40 280 180 2700 45 N V 21 N"FB2"
T1 -310 2680 280 180 2700 45 N I 21 N"FILTER"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 21 "N-000029"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43720 50390 1800 0 4C6D3CF4 4C62D76A ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D76A
AR /4C3F0C9B
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 840 30 280 180 1800 45 M V 20 N"R12"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -5460 -1260 280 180 1800 45 M I 20 N"10k"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 7 "/EESK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43720 50780 1800 0 4C6D3CE9 4C62D76C ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D76C
AR /4C3F0CA1
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 840 20 280 180 1800 45 M V 20 N"R13"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -5550 -140 280 180 1800 45 M I 20 N"10k"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 5 "/EECS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00440001
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46360 40540 1800 15 4C80FE0D 4C62D76E ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D76E
AR /4C3F10FC
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -490 -995 280 180 1800 45 N V 21 N"R15"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 -1410 140 280 180 1800 45 N I 21 N"220"
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 23 "N-000031"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46010 42850 0 15 4C80FDF5 4C62D770 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D770
AR /4C3DDF65
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 132 -370 280 180 0 45 N V 21 N"C18"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 2750 320 280 180 0 45 N I 21 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 40250 41210 900 0 4C6BFD19 4C62D772 ~~
Li SM0402
Sc 4C62D772
AR /4C409062
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 130 -390 280 180 900 45 M V 20 N"R16"
T1 -230 -1330 280 180 900 45 M I 20 N"1M"
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 42390 50880 1800 0 4C6D3CE0 4C62D774 ~~
Li SM0402
Sc 4C62D774
AR /4C4183F2
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 860 -20 280 180 1800 45 M V 20 N"C32"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 4860 -290 280 180 1800 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 40840 50880 1800 0 4C6C0B3A 4C62D776 ~~
Li SM0402
Sc 4C62D776
AR /4C4183F7
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 880 -40 280 180 1800 45 M V 20 N"C33"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 2090 -20 280 180 1800 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 40580 41680 0 0 4C6D3827 4C62D778 ~~
Li SM0402
Sc 4C62D778
AR /4C418A67
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -470 20 280 180 0 45 M V 20 N"C35"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -2950 -90 280 180 0 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 39800 43920 900 0 4C6FD505 4C62D77A ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D77A
AR /4C41D4F8
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -450 -20 280 180 1800 45 M V 20 N"R17"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -79 -591 280 180 900 45 M I 20 N"10k"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 34 "N-000066"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46010 41680 0 15 4C80FDFF 4C62D77C ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C62D77C
AR /4C5EC6FF
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 840 918 280 180 0 45 N V 21 N"C16"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 2070 550 280 180 0 45 N I 21 N"470pF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 32 "N-000062"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
initial import
2010-08-07 18:20:52 +03:00
$MODULE SM0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 45080 40340 0 15 4C6FDA9C 4C62D77F ~~
initial import
2010-08-07 18:20:52 +03:00
Li SM0603
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D77F
AR /4C3DDBB6
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -730 300 280 180 0 45 N V 21 N"C12"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 1360 -1360 280 180 0 45 N I 21 N"10uF"
initial import
2010-08-07 18:20:52 +03:00
DS -450 -250 450 -250 50 21
DS 450 -250 450 250 50 21
DS 450 250 -450 250 50 21
DS -450 250 -450 -250 50 21
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 3 "+5V"
initial import
2010-08-07 18:20:52 +03:00
Po -300 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
initial import
2010-08-07 18:20:52 +03:00
Po 300 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0603
$MODULE SM0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 46280 43350 0 15 4C80FE1E 4C62D781 ~~
initial import
2010-08-07 18:20:52 +03:00
Li SM0603
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D781
AR /4C3DDF67
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 492 508 280 180 0 45 N V 21 N"C17"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 1140 -4350 280 180 0 45 N I 21 N"10uF"
initial import
2010-08-07 18:20:52 +03:00
DS -450 -250 450 -250 50 21
DS 450 -250 450 250 50 21
DS 450 250 -450 250 50 21
DS -450 250 -450 -250 50 21
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
initial import
2010-08-07 18:20:52 +03:00
Po -300 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
initial import
2010-08-07 18:20:52 +03:00
Po 300 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0603
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$MODULE SM0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 40870 48830 2700 15 4C70DC98 4C62D783 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0603
Sc 4C62D783
AR /4C3F0517
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 700 0 280 180 3600 45 N V 21 N"C19"
T1 1270 2030 280 180 2700 45 N I 21 N"3.3uF"
DS -450 -250 450 -250 50 21
DS 450 -250 450 250 50 21
DS 450 250 -450 250 50 21
DS -450 250 -450 -250 50 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sh "1" R 250 450 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 1 "+1.8V"
Po -300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sh "2" R 250 450 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 0.080000 0.080000 0.080000
initial import
2010-08-07 18:20:52 +03:00
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0603
$MODULE SM0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43898 42677 0 0 4C6D3822 4C62D787 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0603
Sc 4C62D787
AR /4C3F093E
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -770 -10 280 180 0 45 M V 20 N"C27"
T1 -5340 -650 280 180 0 45 M I 20 N"4.7uF"
DS -450 250 450 250 50 20
DS 450 250 450 -250 50 20
DS 450 -250 -450 -250 50 20
DS -450 -250 -450 250 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 22 "N-000030"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 250 450 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 0.080000 0.080000 0.080000
initial import
2010-08-07 18:20:52 +03:00
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0603
$MODULE SM0603
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 41520 45400 1800 0 4C6D3864 4C62D78B ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0603
Sc 4C62D78B
AR /4C3F0974
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 -790 -10 280 180 1800 45 M V 20 N"C29"
T1 3590 -1080 280 180 1800 45 M I 20 N"4.7uF"
DS -450 250 450 250 50 20
DS 450 250 450 -250 50 20
DS 450 -250 -450 -250 50 20
DS -450 -250 -450 250 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 250 450 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 21 "N-000029"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 250 450 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 300 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 0.080000 0.080000 0.080000
initial import
2010-08-07 18:20:52 +03:00
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0603
initial import
2010-08-07 18:20:52 +03:00
$MODULE SM1206
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 42370 39930 0 0 4C6D3CC7 4C62D78E ~~
initial import
2010-08-07 18:20:52 +03:00
Li SM1206
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D78E
initial import
2010-08-07 18:20:52 +03:00
AR /4C4090B4
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 1320 10 280 180 0 45 M V 20 N"C31"
T1 -6740 340 300 300 0 50 M I 20 N"4.7nF/250V"
DS -1000 450 -1000 -450 50 20
DS -1000 -450 -350 -450 50 20
DS 350 450 1000 450 50 20
DS 1000 450 1000 -450 50 20
DS 1000 -450 350 -450 50 20
DS -350 450 -1000 450 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 600 800 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
initial import
2010-08-07 18:20:52 +03:00
Po -650 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 600 800 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
initial import
2010-08-07 18:20:52 +03:00
Po 650 0
$EndPAD
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.170000 0.160000 0.160000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM1206
$MODULE SOIC-8
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 45420 50040 900 0 4C70DFC0 4C62D78F ~~
initial import
2010-08-07 18:20:52 +03:00
Li SOIC-8
Cd Module CMS SOJ 8 pins large
Kw CMS SOJ
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D78F
initial import
2010-08-07 18:20:52 +03:00
AR /4C3D875E
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 1230 -50 280 180 1800 45 M V 20 N"U1"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 2410 3200 280 180 900 45 M I 20 N"93C46"
DS -1000 900 1000 900 50 20
DS 1000 900 1000 -900 50 20
DS 1000 -900 -1000 -900 50 20
DS -1000 -900 -1000 900 50 20
DS -1000 300 -800 300 50 20
DS -800 300 -800 -200 50 20
DS -800 -200 -1000 -200 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Sh "8" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -750 1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "7" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -250 1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "6" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 250 1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "5" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 750 1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "4" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 31 "N-000055"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 750 -1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "3" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 6 "/EEDATA"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 250 -1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "2" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 7 "/EESK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -250 -1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "1" R 200 450 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 5 "/EECS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -750 -1250
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Na "smd/cms_so8.wrl"
Sc 0.500000 0.380000 0.500000
initial import
2010-08-07 18:20:52 +03:00
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SOIC-8
initial import
2010-08-07 18:20:52 +03:00
$MODULE SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 41930 50020 900 0 4C6C0B5E 4C6C0B57 ~~
initial import
2010-08-07 18:20:52 +03:00
Li SOT23-5
Cd SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C6C0B57
initial import
2010-08-07 18:20:52 +03:00
AR /4C41817C
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 810 30 280 180 1800 45 M V 20 N"U9"
T1 750 -4070 300 250 900 50 M I 20 N"SN74LVC1G17"
DS 600 350 600 -350 50 20
DS 600 -350 -600 -350 50 20
DS -600 -350 -600 350 50 20
DS -600 350 600 350 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Sh "1" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "3" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "5" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "2" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 10 "/TDI"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "4" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 14 "/T_TDI"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/SOT23_5.wrl"
Sc 0.100000 0.100000 0.100000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SOT23-5
$MODULE SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 40280 42620 1800 0 4C6C09AF 4C62D792 ~~
initial import
2010-08-07 18:20:52 +03:00
Li SOT23-5
Cd SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D792
initial import
2010-08-07 18:20:52 +03:00
AR /4C41817F
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 20 -1000 280 180 1800 45 M V 20 N"U10"
T1 3580 1600 300 250 1800 50 M I 20 N"SN74LVC1G17"
DS 600 350 600 -350 50 20
DS 600 -350 -600 -350 50 20
DS -600 -350 -600 350 50 20
DS -600 350 600 350 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 200 300 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 200 300 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 200 300 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 200 300 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 11 "/TMS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 200 300 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 16 "/T_TMS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/SOT23_5.wrl"
Sc 0.100000 0.100000 0.100000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SOT23-5
$MODULE SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 40360 50010 900 0 4C6D3CA5 4C62D794 ~~
initial import
2010-08-07 18:20:52 +03:00
Li SOT23-5
Cd SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sc 4C62D794
initial import
2010-08-07 18:20:52 +03:00
AR /4C418183
Op 0 0 0
At SMD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T0 810 10 280 180 3600 45 M V 20 N"U11"
T1 3470 -5540 300 250 900 50 M I 20 N"SN74LVC1G17"
DS 600 350 600 -350 50 20
DS 600 -350 -600 -350 50 20
DS -600 -350 -600 350 50 20
DS -600 350 600 350 50 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Sh "1" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "3" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "5" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "2" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 9 "/TCK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Sh "4" R 200 300 0 0 900
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 13 "/T_TCK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Na "smd/SOT23_5.wrl"
Sc 0.100000 0.100000 0.100000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SOT23-5
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$MODULE SOT23-5
Po 45050 41290 2700 15 4C6D3CAF 4C62D796 ~~
Li SOT23-5
Cd SOT23-5
Sc 4C62D796
AR /4C5EC699
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD
T0 890 0 300 250 3600 50 N V 21 N"U4"
T1 -150 -3880 300 250 2700 50 N I 21 N"MIC5207-3.3"
DS 600 -350 600 350 50 21
DS 600 350 -600 350 50 21
DS -600 350 -600 -350 50 21
DS -600 -350 600 -350 50 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 200 300 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 3 "+5V"
Po -375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 200 300 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 3 "+5V"
Po 375 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 200 300 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 2 "+3.3V"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 200 300 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 200 300 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 32 "N-000062"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 -500
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$SHAPE3D
Na "smd/SOT23_5.wrl"
Sc 0.100000 0.100000 0.100000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SOT23-5
$MODULE TSOP-6
Po 41510 42320 900 0 4C6BFD05 4C62D797 ~~
Li TSOP-6
Sc 4C62D797
AR /4C4092BB
Op 0 0 0
T0 1200 500 280 180 3600 45 M V 20 N"U6"
T1 -880 -5410 400 400 900 80 M I 20 N"NUP2201"
DC -88 317 -37 269 30 20
DS 888 747 967 747 30 20
DS 967 747 969 201 30 20
DS 969 201 888 201 30 20
DS -139 746 -217 746 30 20
DS -217 746 -216 205 30 20
DS -216 205 -143 204 30 20
$PAD
Sh "1" R 276 394 0 0 900
Dr 0 0 0
At SMD N 00440001
Ne 4 "/D+"
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 276 394 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 276 394 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 748 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 276 394 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 750 944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 276 394 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 18 "/VBUS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 372 944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "6" R 276 394 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 17 "/USB_DM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE TSOP-6
$MODULE TSOP-6
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 45840 47960 2700 15 4C70E3D0 4C6C0D1B ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li TSOP-6
Sc 4C6C0D1B
AR /4C4093A0
Op 0 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 1210 -400 280 180 3600 45 N V 21 N"U7"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
T1 690 -5070 400 400 2700 80 N I 21 N"NUP2201"
DC -88 -317 -37 -269 30 21
DS 888 -747 967 -747 30 21
DS 967 -747 969 -201 30 21
DS 969 -201 888 -201 30 21
DS -139 -746 -217 -746 30 21
DS -217 -746 -216 -205 30 21
DS -216 -205 -143 -204 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 8 "/RXD"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 375 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 748 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 0 ""
Po 750 -944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 19 "/VUART"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 372 -944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "6" R 276 394 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 12 "/TXD"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -944
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE TSOP-6
$MODULE USB_MINIB
Po 41320 42590 0 15 4C6D3CB4 4C6AAFFF ~~
Li USB_MINIB
Sc 4C6AAFFF
AR /4C5ECC0A
Op 0 0 0
T0 -1450 -1680 280 180 0 45 N V 21 N"J1"
T1 -8050 1500 600 600 0 120 N I 21 N"USB_MINIB"
DC 1279 335 1318 413 30 21
DS 2126 -2283 2126 -886 30 21
DS -906 -3012 -906 -3858 30 21
DS -906 -3858 2126 -3858 30 21
DS 2126 -3858 2126 -3031 30 21
DS -906 -886 -906 -2283 30 21
DS 1358 -197 1988 -197 30 21
DS -98 -197 -728 -197 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 197 787 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -197
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 197 787 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 315 -197
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 197 787 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 4 "/D+"
Po 630 -197
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 197 787 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 17 "/USB_DM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 945 -197
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 197 787 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 18 "/VBUS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1260 -197
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "6" R 630 709 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -1063 -512
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "7" R 630 709 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2323 -512
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "8" R 630 709 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -1063 -2657
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "9" R 630 709 0 0 0
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 35 "N-000074"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2323 -2657
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "10" C 394 394 0 0 0
Dr 394 0 0
At STD N 00E0FFFF
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po -197 -1575
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "11" C 394 394 0 0 0
Dr 394 0 0
At STD N 00E0FFFF
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1457 -1575
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE USB_MINIB
$MODULE SM0402
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 40949 43598 900 15 4C70E024 4C6ABFB5 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C6ABFB5
AR /4C3D82D1
Op 0 0 0
At SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
T0 -370 20 280 180 900 45 N V 21 N"R6"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 420 -2300 280 180 900 45 N I 21 N"1k"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 28 "N-000049"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Ne 2 "+3.3V"
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0402
$MODULE SM0402
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 42539 43602 900 15 4C6D37D3 4C6ABFB7 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
Sc 4C6ABFB7
AR /4C3F085B
Op 0 0 0
At SMD
T0 -440 50 280 180 900 45 N V 21 N"R14"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 140 4700 280 180 900 45 N I 21 N"12k"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 -190 540 -190 30 21
DS 540 -190 540 190 30 21
DS 540 190 -190 190 30 21
DS -190 190 -190 -190 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 24 "N-000032"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 900
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
initial import
2010-08-07 18:20:52 +03:00
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43622 42244 0 0 4C6D3831 4C811333 ~~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li SM0402
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Sc 4C811333
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
AR /4C3F0949
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD
T0 -490 -40 280 180 0 45 M V 20 N"C28"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 -5890 260 280 180 0 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 0
Dr 0 0 0
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 22 "N-000030"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 0
Dr 0 0 0
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$SHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
initial import
2010-08-07 18:20:52 +03:00
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE SM0402
$MODULE SM0402
Po 41810 45870 1800 0 4C6D386F 4C6BF4F5 ~~
Li SM0402
Sc 4C6BF4F5
AR /4C3F09AA
initial import
2010-08-07 18:20:52 +03:00
Op 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD
T0 -640 0 280 180 1800 45 M V 20 N"C30"
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
T1 3730 -1200 280 180 1800 45 M I 20 N"100nF"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
DS -190 190 540 190 30 20
DS 540 190 540 -190 30 20
DS 540 -190 -190 -190 30 20
DS -190 -190 -190 190 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 21 "N-000029"
initial import
2010-08-07 18:20:52 +03:00
Po 0 0
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 181 181 0 0 1800
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 350 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$SHAPE3D
Na "smd/chip_cms.wrl"
Sc 0.080000 0.080000 0.080000
Of 0.000000 0.000000 0.000000
Ro 0.000000 0.000000 0.000000
$EndSHAPE3D
$EndMODULE SM0402
$MODULE IDC-2.0-14-SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 43981 43630 2700 0 4C6D3640 4C6C0A6A F~
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Li IDC-2.0-14-SMD
Sc 4C6C0A6A
AR /4C3DD739
Op 0 0 0
T0 2352 -1624 280 180 3600 45 M V 20 N"P2"
T1 -150 -5480 600 600 2700 120 M I 20 N"JTAG"
DS -197 -1457 0 -1260 30 20
DS 0 -1260 197 -1457 30 20
DS 197 -1457 -197 -1457 30 20
DS -197 1378 -591 1378 30 20
DS -591 1378 -591 -787 30 20
DS -591 -787 -197 -787 30 20
DS 4921 1378 5315 1378 30 20
DS 5315 1378 5315 -787 30 20
DS 5315 -787 4921 -787 30 20
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 36 "VCOM"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 16 "/T_TMS"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 787 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 787 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "6" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 13 "/T_TCK"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1575 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "5" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 1575 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "8" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 15 "/T_TDO"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2362 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "7" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 2362 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "10" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 14 "/T_TDI"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3150 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "9" R 394 984 0 0 2700
initial import
2010-08-07 18:20:52 +03:00
Dr 0 0 0
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3150 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "12" R 394 984 0 0 2700
Dr 0 0 0
At SMD N 00440001
Ne 0 ""
Po 3937 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "11" R 394 984 0 0 2700
Dr 0 0 0
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 3937 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "14" R 394 984 0 0 2700
Dr 0 0 0
At SMD N 00440001
Ne 0 ""
Po 4724 -748
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "13" R 394 984 0 0 2700
Dr 0 0 0
At SMD N 00440001
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 4724 1339
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE IDC-2.0-14-SMD
$MODULE CRYSTAL_SMD
Po 44690 42970 2700 15 4C6D3955 4C6BF4F2 ~~
Li CRYSTAL_SMD
Sc 4C6BF4F2
AR /4C3D77D1
Op 0 0 0
T0 920 -1200 280 180 2700 45 N V 21 N"X1"
T1 5120 7660 600 600 2700 120 N I 21 N"12MHz"
DC 0 433 -59 423 30 21
DS -374 -955 -374 325 30 21
DS -374 325 1240 325 30 21
DS 1240 325 1240 -955 30 21
DS 1240 -955 -374 -955 30 21
initial import
2010-08-07 18:20:52 +03:00
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "1" R 551 453 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 30 "N-000054"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "2" R 551 453 0 0 2700
Dr 0 0 0
At SMD N 00888000
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 866 0
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "3" R 551 453 0 0 2700
Dr 0 0 0
At SMD N 00888000
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 29 "N-000052"
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 866 -630
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
$PAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Sh "4" R 551 453 0 0 2700
Dr 0 0 0
At SMD N 00888000
initial import
2010-08-07 18:20:52 +03:00
Ne 0 ""
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 -630
initial import
2010-08-07 18:20:52 +03:00
$EndPAD
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
$EndMODULE CRYSTAL_SMD
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
$MODULE SIL-4
Po 46496 45866 900 0 4C751A91 4C6D603F ~~
Li SIL-4
Cd Connecteur 4 pibs
Kw CONN DEV
Sc 4C6D603F
AR /4C3DD6B1
Op 0 0 0
T0 -2289 5 280 180 1800 45 M V 20 N"P1"
T1 -1689 3425 600 400 900 100 M I 20 N"UART"
DS -2000 500 -2000 500 120 20
DS -2000 -500 -2000 500 120 20
DS -2000 500 -2000 500 120 20
DS -2000 500 2000 500 120 20
DS 2000 500 2000 -500 120 20
DS 2000 -500 -2000 -500 120 20
DS -1000 -500 -1000 500 120 20
$PAD
Sh "1" R 591 591 0 0 900
Dr 354 0 0
At STD N 00D0FFFF
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 19 "/VUART"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po -1500 0
$EndPAD
$PAD
Sh "2" C 591 591 0 0 900
Dr 354 0 0
At STD N 00D0FFFF
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 8 "/RXD"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po -500 0
$EndPAD
$PAD
Sh "3" C 591 591 0 0 900
Dr 354 0 0
At STD N 00D0FFFF
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 12 "/TXD"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 500 0
$EndPAD
$PAD
Sh "4" C 591 591 0 0 900
Dr 354 0 0
At STD N 00D0FFFF
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Ne 20 "GND"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 1500 0
$EndPAD
$EndMODULE SIL-4
$DRAWSEGMENT
Po 0 47244 41220 47244 41220 150
De 28 0 900 0 0
$EndDRAWSEGMENT
$DRAWSEGMENT
Po 0 46732 41221 47244 41221 150
De 28 0 900 0 0
$EndDRAWSEGMENT
$DRAWSEGMENT
Po 0 46732 39370 46732 41220 150
De 28 0 900 0 0
$EndDRAWSEGMENT
$TEXTPCB
Te "USB JTAG/serial cable for Milkymist One."
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 42343 50039 180 280 45 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 21 1 0 Normal
$EndTEXTPCB
initial import
2010-08-07 18:20:52 +03:00
$DRAWSEGMENT
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 39370 51181 39370 39370 150
initial import
2010-08-07 18:20:52 +03:00
De 28 0 900 0 0
$EndDRAWSEGMENT
$DRAWSEGMENT
Change everything to small footprint. Currently the board is 20mmX30mm now, much smaller than last on. this version only finish the footprint and placement.
2010-08-19 18:32:48 +03:00
Po 0 47244 51181 39370 51181 150
initial import
2010-08-07 18:20:52 +03:00
De 28 0 900 0 0
$EndDRAWSEGMENT
$DRAWSEGMENT
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 47244 41220 47244 51181 150
initial import
2010-08-07 18:20:52 +03:00
De 28 0 900 0 0
$EndDRAWSEGMENT
$DRAWSEGMENT
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39370 39370 46732 39370 150
initial import
2010-08-07 18:20:52 +03:00
De 28 0 900 0 0
$EndDRAWSEGMENT
$TRACK
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 43825 44785 43655 44785 100 -1
De 15 0 1 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43300 45140 43250 45140 100 -1
De 15 0 1 0 0
Po 0 43655 44785 43300 45140 100 -1
De 15 0 1 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 41040 44930 41380 44930 100 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 15 0 1 0 0
Po 0 42880 45290 43030 45140 100 -1
De 15 0 1 0 0
Po 0 41740 45290 42880 45290 100 -1
De 15 0 1 0 0
Po 0 41380 44930 41740 45290 100 -1
De 15 0 1 0 0
Po 0 43250 45140 43250 45290 100 -1
De 15 0 1 0 0
Po 0 43250 45290 43400 45440 100 -1
De 15 0 1 0 0
Po 3 43400 45440 43400 45440 220 -1
De 15 1 1 0 0
Po 0 43400 45440 43330 45510 100 -1
De 0 0 1 0 0
Po 0 43330 45510 43330 47650 100 -1
De 0 0 1 0 0
Po 3 43330 47650 43330 47650 220 -1
De 15 1 1 0 0
Po 0 43330 47650 43418 47738 100 -1
De 15 0 1 0 0
Po 0 43418 47738 43825 47738 100 -1
De 15 0 1 0 400
Po 0 43030 45140 43250 45140 100 -1
De 15 0 1 0 0
Po 0 41250 44940 40990 44940 100 -1
De 0 0 1 0 800
Po 0 40990 44940 41040 44930 100 -1
De 0 0 1 0 0
Po 0 41365 48033 41365 47765 100 -1
De 15 0 1 0 800
Po 0 41365 47765 41680 47450 100 -1
De 15 0 1 0 0
Po 0 41680 47450 43210 47450 100 -1
De 15 0 1 0 0
Po 0 43210 47450 43498 47738 100 -1
De 15 0 1 0 0
Po 0 43498 47738 43825 47738 100 -1
De 15 0 1 0 400
Po 0 41365 44490 41365 44715 100 -1
De 15 0 1 0 800
Po 3 41040 44930 41040 44930 220 -1
De 15 1 1 0 0
Po 0 41150 44930 41040 44930 100 -1
De 15 0 1 0 0
Po 0 41365 44715 41150 44930 100 -1
De 15 0 1 0 0
Po 0 43825 44785 44335 44785 100 -1
De 15 0 1 0 800
Po 0 44335 44785 44340 44790 100 -1
De 15 0 1 0 400
Po 0 41360 48570 40910 48570 100 -1
De 15 0 1 0 800
Po 0 40910 48570 40870 48530 100 -1
De 15 0 1 0 400
Po 0 41365 48033 41365 48565 100 -1
De 15 0 1 0 800
Po 0 41365 48565 41360 48570 100 -1
De 15 0 1 0 400
Po 0 45300 50645 45800 50645 100 -1
De 15 0 2 0 C00
Po 0 46670 50790 46190 50790 100 -1
De 0 0 2 0 800
Po 0 46190 50790 46180 50780 100 -1
De 0 0 2 0 0
Po 0 45550 40915 45550 41190 100 -1
De 15 0 2 0 800
Po 0 39570 43070 40170 43670 100 -1
De 15 0 2 0 0
Po 0 39570 42530 39570 43070 100 -1
De 15 0 2 0 0
Po 0 39740 42360 39570 42530 100 -1
De 15 0 2 0 0
Po 0 39740 40710 39740 42360 100 -1
De 15 0 2 0 0
Po 0 39810 40640 39740 40710 100 -1
De 15 0 2 0 0
Po 3 39810 40640 39810 40640 220 -1
De 15 1 2 0 0
Po 0 39830 40640 39810 40640 100 -1
De 0 0 2 0 0
Po 0 39970 40500 39830 40640 100 -1
De 0 0 2 0 0
Po 0 43450 40500 39970 40500 100 -1
De 0 0 2 0 0
Po 0 43950 40000 43450 40500 100 -1
De 0 0 2 0 0
Po 0 44680 40000 43950 40000 100 -1
De 0 0 2 0 0
Po 0 45210 40530 44680 40000 100 -1
De 0 0 2 0 0
Po 0 45210 40850 45210 40530 100 -1
De 0 0 2 0 0
Po 0 45550 41190 45210 40850 100 -1
De 0 0 2 0 0
Po 3 45550 41190 45550 41190 220 -1
De 15 1 2 0 0
Po 0 42450 48580 42450 48700 100 -1
De 15 0 2 0 800
Po 0 42330 50100 43050 50100 100 -1
De 0 0 2 0 0
Po 0 42130 49900 42330 50100 100 -1
De 0 0 2 0 0
Po 0 42130 49140 42130 49900 100 -1
De 0 0 2 0 0
Po 0 42510 48760 42130 49140 100 -1
De 0 0 2 0 0
Po 3 42510 48760 42510 48760 220 -1
De 15 1 2 0 0
Po 0 42450 48700 42510 48760 100 -1
De 15 0 2 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 40949 43248 40590 43250 100 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 15 0 2 0 800
Po 0 40590 43250 40170 43670 100 -1
De 15 0 2 0 0
Po 0 39996 45376 40282 45376 100 -1
De 15 0 2 0 400
Po 0 40170 43670 39700 44140 100 -1
De 15 0 2 0 0
Po 0 39700 44140 39700 45080 100 -1
De 15 0 2 0 0
Po 0 39700 45080 39996 45376 100 -1
De 15 0 2 0 0
Po 0 42349 48033 42349 47849 100 -1
De 15 0 2 0 800
Po 0 41410 47320 41410 47270 100 -1
De 15 0 2 0 0
Po 3 41410 47320 41410 47320 220 -1
De 15 1 2 0 0
Po 0 41600 47320 41410 47320 100 -1
De 0 0 2 0 0
Po 0 41960 47680 41600 47320 100 -1
De 0 0 2 0 0
Po 3 41960 47680 41960 47680 220 -1
De 15 1 2 0 0
Po 0 42180 47680 41960 47680 100 -1
De 15 0 2 0 0
Po 0 42349 47849 42180 47680 100 -1
De 15 0 2 0 0
Po 0 41410 47270 41410 47260 100 -1
De 15 0 2 0 0
Po 0 43825 46360 43550 46360 100 -1
De 15 0 2 0 800
Po 0 43250 46660 43250 47270 100 -1
De 15 0 2 0 0
Po 0 43550 46360 43250 46660 100 -1
De 15 0 2 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 40949 43248 41870 43248 100 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 15 0 2 0 C00
Po 0 46275 48815 46275 49790 100 -1
De 0 0 2 0 0
Po 0 46275 49790 46270 49790 100 -1
De 0 0 2 0 0
Po 0 40810 45810 40710 45810 100 -1
De 0 0 2 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 40720 47400 40569 47541 100 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 15 0 2 0 0
Po 3 40720 47400 40720 47400 220 -1
De 15 1 2 0 0
Po 0 40510 47190 40720 47400 100 -1
De 0 0 2 0 0
Po 0 40510 46010 40510 47190 100 -1
De 0 0 2 0 0
Po 0 40710 45810 40510 46010 100 -1
De 0 0 2 0 0
Po 0 40569 47541 40282 47541 100 -1
De 15 0 2 0 400
Po 0 43551 47541 43825 47541 100 -1
De 15 0 2 0 400
Po 0 40569 47541 40840 47270 100 -1
De 15 0 2 0 0
Po 0 40840 47270 41410 47270 100 -1
De 15 0 2 0 0
Po 0 41410 47270 43250 47270 100 -1
De 15 0 2 0 0
Po 0 43250 47270 43280 47270 100 -1
De 15 0 2 0 0
Po 0 43280 47270 43551 47541 100 -1
De 15 0 2 0 0
Po 0 45300 50645 45265 50645 100 -1
De 15 0 2 0 800
Po 0 43120 50390 43370 50390 100 -1
De 0 0 2 0 400
Po 0 43090 50360 43120 50390 100 -1
De 0 0 2 0 0
Po 3 43090 50360 43090 50360 220 -1
De 15 1 2 0 0
Po 0 44980 50360 43090 50360 100 -1
De 15 0 2 0 0
Po 0 45265 50645 44980 50360 100 -1
De 15 0 2 0 0
Po 0 43190 50380 43360 50380 100 -1
De 0 0 2 0 0
Po 0 43050 50100 43050 50240 100 -1
De 0 0 2 0 0
Po 0 43190 50380 43050 50240 100 -1
De 0 0 2 0 0
Po 0 43360 50380 43370 50390 100 -1
De 0 0 2 0 400
Po 0 43370 49630 43200 49630 100 -1
De 0 0 2 0 800
Po 0 43200 49630 43050 49780 100 -1
De 0 0 2 0 0
Po 0 43050 49780 43050 50100 100 -1
De 0 0 2 0 0
Po 0 43260 49630 43370 49630 100 -1
De 0 0 2 0 400
Po 0 43370 50390 43370 50780 100 -1
De 0 0 2 0 C00
Po 0 46670 49790 46270 49790 100 -1
De 0 0 2 0 800
Po 0 46270 49790 46180 49880 100 -1
De 0 0 2 0 0
Po 0 46520 48580 46510 48580 100 -1
De 0 0 2 0 800
Po 0 46180 49880 46180 50780 100 -1
De 0 0 2 0 0
Po 0 46510 48580 46275 48815 100 -1
De 0 0 2 0 0
Po 0 42349 48033 42349 48429 100 -1
De 15 0 2 0 800
Po 0 42450 48530 42450 48580 100 -1
De 15 0 2 0 400
Po 0 42349 48429 42450 48530 100 -1
De 15 0 2 0 0
Po 0 45300 50645 46040 50645 100 -1
De 15 0 2 0 800
Po 0 46040 50645 46125 50730 100 -1
De 15 0 2 0 0
Po 3 46180 50780 46180 50780 220 -1
De 15 1 2 0 0
Po 0 46125 50730 46180 50780 100 -1
De 15 0 2 0 0
Po 0 40282 45376 40476 45376 100 -1
De 15 0 2 0 800
Po 3 40810 45810 40810 45810 220 -1
De 15 1 2 0 0
Po 0 40810 45710 40810 45810 100 -1
De 15 0 2 0 0
Po 0 40476 45376 40810 45710 100 -1
De 15 0 2 0 0
Po 0 40810 45810 40810 46180 100 -1
De 0 0 2 0 400
Po 0 40282 47541 39799 47541 100 -1
De 15 0 2 0 800
Po 0 39799 47541 39780 47560 100 -1
De 15 0 2 0 400
Po 0 45550 40915 45550 40930 100 -1
De 15 0 2 0 800
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 43500 42930 43169 43268 100 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 15 0 2 0 400
Po 0 43870 42560 43500 42930 100 -1
De 15 0 2 0 0
Po 0 44160 42560 43870 42560 100 -1
De 15 0 2 0 0
Po 0 44340 42380 44160 42560 100 -1
De 15 0 2 0 0
Po 0 44650 42380 44340 42380 100 -1
De 15 0 2 0 0
Po 0 45280 41750 44650 42380 100 -1
De 15 0 2 0 0
Po 0 45280 41200 45280 41750 100 -1
De 15 0 2 0 0
Po 0 45550 40930 45280 41200 100 -1
De 15 0 2 0 0
Po 0 46010 40920 45555 40920 100 -1
De 15 0 2 0 800
Po 0 45555 40920 45550 40915 100 -1
De 15 0 2 0 400
Po 0 46010 40540 46010 40920 100 -1
De 15 0 2 0 C00
Po 0 46010 40920 46010 41300 100 -1
De 15 0 2 0 C00
Po 0 43825 47541 44149 47541 100 -1
De 15 0 2 0 800
Po 0 44149 47541 44360 47330 100 -1
De 15 0 2 0 400
Po 0 44780 40340 44390 40340 200 -1
De 15 0 3 0 800
Po 0 44935 41665 44550 41665 200 -1
De 15 0 3 0 400
Po 0 44940 41670 44935 41665 200 -1
De 15 0 3 0 0
Po 3 44940 41670 44940 41670 350 -1
De 15 1 3 0 0
Po 0 44610 41670 44940 41670 200 -1
De 0 0 3 0 0
Po 0 44540 41600 44610 41670 200 -1
De 0 0 3 0 0
Po 0 44540 40490 44540 41600 200 -1
De 0 0 3 0 0
Po 0 44360 40310 44540 40490 200 -1
De 0 0 3 0 0
Po 3 44360 40310 44360 40310 350 -1
De 15 1 3 0 0
Po 0 44390 40340 44360 40310 200 -1
De 15 0 3 0 0
Po 0 44780 40340 44760 40340 200 -1
De 15 0 3 0 800
Po 0 44550 40550 44550 40915 200 -1
De 15 0 3 0 400
Po 0 44760 40340 44550 40550 200 -1
De 15 0 3 0 0
Po 0 44900 39840 44900 40220 200 -1
De 15 0 3 0 800
Po 0 44900 40220 44780 40340 200 -1
De 15 0 3 0 400
Po 0 44050 41000 44110 41000 200 -1
De 15 0 3 0 800
Po 0 44110 41000 44195 40915 200 -1
De 15 0 3 0 0
Po 0 44195 40915 44550 40915 200 -1
De 15 0 3 0 400
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 42110 44130 42110 42877 60 -1
De 15 0 4 0 0
Po 0 42110 44130 42200 44220 60 -1
De 15 0 4 0 0
Po 0 42200 44220 42200 44442 60 -1
De 15 0 4 0 0
Po 0 42152 44490 42200 44442 60 -1
De 15 0 4 0 800
Po 0 41950 42717 41950 42393 60 -1
De 15 0 4 0 400
Po 0 42110 42877 41950 42717 60 -1
De 15 0 4 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41510 42320 41770 42320 60 -1
De 0 0 4 0 800
Po 0 41950 41370 41950 42393 60 -1
De 15 0 4 0 400
Po 0 41680 41100 41950 41370 60 -1
De 15 0 4 0 0
Po 3 41680 41100 41680 41100 220 -1
De 15 1 4 0 0
Po 0 41830 41250 41680 41100 60 -1
De 0 0 4 0 0
Po 0 41830 42260 41830 41250 60 -1
De 0 0 4 0 0
Po 0 41770 42320 41830 42260 60 -1
De 0 0 4 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
Po 0 44170 50790 44400 50790 60 -1
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
De 0 0 5 0 800
Po 0 46002 44982 46010 44990 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 5 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 46010 44990 46010 44990 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 5 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46010 44990 45930 45110 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 5 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45930 45110 45930 49260 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 5 0 0
Po 0 46002 44982 43825 44982 60 -1
De 15 0 5 0 400
Po 0 45930 49260 44400 50790 60 -1
De 0 0 5 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43720 50780 44170 50790 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 5 0 C00
Po 0 43825 45376 45356 45376 60 -1
De 15 0 6 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45356 45376 45460 45480 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 6 0 0
Po 0 45686 49162 45686 45706 60 -1
De 0 0 6 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45058 49790 45686 49162 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44170 49790 45058 49790 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45460 45480 45460 45480 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 6 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45686 45706 45460 45480 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43720 50010 44060 50010 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44060 50010 44170 49900 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44170 49900 44170 49790 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 6 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45808 45438 45560 45190 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43825 45179 45529 45179 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 7 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45560 45190 45560 45190 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45529 45179 45560 45190 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44400 50281 44179 50281 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44179 50281 44170 50290 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 400
Po 0 45808 49211 45808 45438 60 -1
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44738 50281 44400 50281 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44738 50281 45808 49211 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44430 50280 44400 50281 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43720 50390 44180 50390 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44180 50390 44170 50290 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 7 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41758 48568 42300 49110 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44510 49110 44930 48690 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42300 49110 44510 49110 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45660 47960 45840 47960 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44850 48770 44930 48690 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44930 48690 45660 47960 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
Po 0 41758 48568 41758 48033 60 -1
De 15 0 8 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46496 46366 46264 46366 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45840 46790 45840 47960 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46264 46366 45840 46790 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 8 0 0
Po 0 39980 45470 39980 48880 60 -1
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39980 48880 39610 49250 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40577 44490 40010 44490 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 9 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40010 44490 39950 44430 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39780 44430 39950 44430 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39730 44480 39780 44430 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39730 45220 39730 44480 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39980 45470 39730 45220 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39860 50010 39690 50010 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39690 50010 39610 49930 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39610 49930 39610 49250 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 39950 44430 39950 44430 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 9 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40120 45790 40120 49160 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40300 49620 40700 50020 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
Po 0 40120 49160 40300 49340 60 -1
De 0 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40300 49340 40300 49620 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
Po 0 40700 50020 41430 50020 60 -1
De 0 0 10 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40282 44785 39945 44785 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 10 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40120 45410 40120 45790 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39940 45230 40120 45410 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39940 44780 39940 45230 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 39940 44780 39940 44780 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39945 44785 39940 44780 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 10 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40280 43330 40430 43480 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 11 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40430 44990 40620 45180 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 11 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40430 43480 40430 44990 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 11 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40280 43120 40280 43330 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 11 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40619 45179 40282 45179 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 11 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40620 45180 40620 45180 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 11 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40620 45180 40619 45179 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 11 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41970 48440 41970 48594 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45550 47890 45550 47700 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44454 48986 45550 47890 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42362 48986 44454 48986 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41970 48594 42362 48986 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41690 48720 41690 48860 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41970 48440 41690 48720 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41970 48440 41970 48440 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46344 45366 45990 45720 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45990 45720 45990 46440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45990 46440 45700 46730 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45700 46730 45700 47550 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45700 47550 45550 47700 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46496 45366 46344 45366 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41561 48731 41561 48033 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41690 48860 41690 48860 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41690 48860 41561 48731 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46496 45366 46726 45366 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46950 47794 46784 47960 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46950 45590 46950 47794 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46726 45366 46950 45590 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 12 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40860 49635 40915 49635 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41890 49440 42110 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41890 49440 41890 49440 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41110 49440 41890 49440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40915 49635 41110 49440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42110 49660 42440 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42450 49670 42450 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42440 49660 42450 49670 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 45205 44735 45205 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44140 46400 43738 46802 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45270 46400 44140 46400 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45470 46200 45270 46400 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45470 45780 45470 46200 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45380 45690 45470 45780 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45220 45690 45380 45690 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44735 45205 45220 45690 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43738 48750 43738 48902 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43600 49040 43460 49040 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43738 48902 43600 49040 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42710 49650 42710 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42110 49660 42450 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42450 49660 42710 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43460 49040 42950 49550 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42950 49550 42900 49550 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 42900 49550 42900 49550 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42900 49550 42790 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42790 49660 42720 49660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42720 49660 42710 49650 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43738 48750 43738 46802 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 13 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42600 49330 42500 49430 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 14 0 0
Po 0 43860 49040 43860 47030 60 -1
De 0 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43860 47030 44110 46780 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 46780 44110 46780 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 14 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43580 49320 43590 49330 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43580 49320 43580 49320 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43590 49330 42600 49330 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43860 49040 43580 49320 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42430 49500 42430 49645 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 14 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42500 49430 42430 49500 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 42500 49430 42500 49430 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 14 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 45992 44432 45992 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40290 44990 40282 44982 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 15 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40530 44990 40290 44990 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40650 44870 40530 44990 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40650 44870 40650 44870 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40940 44580 40650 44870 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41980 44580 40940 44580 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42160 44760 41980 44580 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43200 44760 42160 44760 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44432 45992 43200 44760 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 15 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 44417 44487 44417 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39900 42120 39905 42120 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40620 42840 39900 42120 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42540 42840 40620 42840 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43040 43340 42540 42840 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43410 43340 43040 43340 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44487 44417 43410 43340 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 16 0 0
Po 0 42232 44080 42232 42862 60 -1
De 15 0 17 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42232 44080 42322 44170 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 17 0 0
Po 0 42322 44170 42322 44442 60 -1
De 15 0 17 0 0
Po 0 42322 44442 42349 44469 60 -1
De 15 0 17 0 0
Po 0 42349 44490 42349 44469 60 -1
De 15 0 17 0 800
Po 0 42265 42829 42265 42393 60 -1
De 15 0 17 0 400
Po 0 42232 42862 42265 42829 60 -1
De 15 0 17 0 0
Po 0 42454 42320 42190 42320 60 -1
De 0 0 17 0 800
Po 0 42190 42320 42130 42260 60 -1
De 0 0 17 0 0
Po 0 42130 42260 42130 41220 60 -1
De 0 0 17 0 0
Po 0 42265 41095 42265 42393 60 -1
De 15 0 17 0 400
Po 0 42260 41090 42265 41095 60 -1
De 15 0 17 0 0
Po 3 42260 41090 42260 41090 220 -1
De 15 1 17 0 0
Po 0 42130 41220 42260 41090 60 -1
De 0 0 17 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42454 41948 42842 41948 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43440 41350 44050 41350 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 18 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43430 41360 43440 41350 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43430 41360 43430 41360 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42842 41948 43430 41360 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42580 42393 42957 42393 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 18 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42456 41950 42454 41948 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42840 41950 42456 41950 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43010 42120 42840 41950 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43010 42340 43010 42120 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43010 42340 43010 42340 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42957 42393 43010 42340 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 18 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46784 48332 46592 48332 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 19 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46496 48236 46496 47366 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 19 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46592 48332 46496 48236 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 19 0 0
Po 0 43587 43268 43936 43268 100 -1
De 15 0 20 0 800
Po 0 43936 43268 44094 43110 100 -1
De 15 0 20 0 0
Po 0 42970 42700 42970 42935 100 -1
De 15 0 20 0 0
Po 0 42653 43252 42539 43252 100 -1
De 15 0 20 0 400
Po 0 42970 42935 42653 43252 100 -1
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44198 42677 44198 42568 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43972 42342 43972 42244 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44198 42568 43972 42342 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44198 43006 44198 42677 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44094 43110 44094 43110 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
Po 0 44094 43110 44198 43006 100 -1
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45000 41024 45000 41024 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 42126 45866 42126 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45866 42126 45866 42126 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45866 41890 45866 42126 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45866 41890 45000 41024 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 42126 46378 42126 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
Po 0 45120 39600 44320 39600 100 -1
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43280 39670 43020 39930 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44150 39670 43280 39670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44200 39720 44150 39670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44200 39720 44200 39720 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44320 39600 44200 39720 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40770 44160 40190 44160 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40180 44150 40180 44150 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40190 44160 40180 44150 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41168 44490 41168 43992 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41170 43990 41170 44160 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41180 43980 41170 43990 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41180 43980 41180 43980 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41168 43992 41180 43980 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41220 45400 40810 45400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40810 45400 40710 45500 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40710 45500 40550 45500 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40550 45500 40180 45130 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40180 45130 40180 44150 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39905 43295 39905 43120 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40180 44150 40180 43570 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40180 43570 39905 43295 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45840 48335 45635 48335 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44400 47670 44710 47670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44110 47960 44400 47670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44110 47960 44110 47960 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44050 48020 44110 47960 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44050 48680 44050 48020 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44130 48760 44050 48680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44310 48760 44130 48760 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44760 49210 44310 48760 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44760 49210 44760 49210 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45635 48335 44760 49210 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42743 44490 42743 44147 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 43772 42642 43630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42880 44010 42642 43772 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 42880 44010 42880 44010 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42743 44147 42880 44010 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43530 44490 43530 44670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42743 44803 42743 44490 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42810 44870 42743 44803 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43330 44870 42810 44870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43530 44670 43330 44870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 43630 41970 43630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41970 43630 41560 44040 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41560 44040 41560 44170 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41561 44490 41561 44171 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40774 44164 40774 44490 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40770 44160 40774 44164 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40770 44160 40770 44160 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41550 44160 41170 44160 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41170 44160 40770 44160 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41560 44170 41550 44160 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41560 44170 41560 44170 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41561 44171 41560 44170 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41561 44490 41758 44490 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41600 44940 41600 44870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42405 45205 42642 45205 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41930 44730 42405 45205 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41740 44730 41930 44730 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41600 44870 41740 44730 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41600 44940 41600 45020 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41600 45020 41220 45400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44550 41290 44820 41290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44820 41290 45000 41110 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45000 41110 45000 41024 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45380 40570 45380 40340 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45000 41024 45000 40950 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45000 40950 45380 40570 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 43630 42642 44417 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43131 42630 43040 42630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43131 42630 43380 42381 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43380 42381 43380 42111 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43380 42111 43470 42021 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43470 42021 43849 42021 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43849 42021 43970 42142 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
Po 0 43970 42360 43970 42142 100 -1
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42970 42700 42980 42690 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 42980 42690 42980 42690 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43040 42630 42980 42690 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44090 42480 44090 42850 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43970 42360 44090 42480 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40250 41210 40090 41210 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40090 41210 39680 41620 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39680 41620 39680 42340 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39680 42340 39760 42420 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39760 42420 39880 42420 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39880 42420 40040 42580 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40040 42580 40040 42985 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40040 42985 39905 43120 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41320 42393 41263 42393 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40930 42060 40930 41680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40990 42120 40930 42060 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40990 42120 40990 42120 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41263 42393 40990 42120 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40250 41210 40600 41210 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40930 41540 40930 41680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40600 41210 40930 41540 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40930 41680 41200 41950 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41200 41950 41505 41950 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41505 41950 41510 41945 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45250 39840 45250 39730 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45250 39730 45120 39600 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45840 48335 46145 48335 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46670 49150 46670 49290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46590 49070 46670 49150 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 46590 49070 46590 49070 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 48840 46590 49070 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 48550 46360 48840 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46145 48335 46360 48550 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43825 47344 43996 47344 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44710 47210 44710 47330 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44640 47140 44710 47210 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44200 47140 44640 47140 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43996 47344 44200 47140 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44710 47330 44710 47670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44710 47670 44710 48010 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44710 48010 44290 48430 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44290 48430 43330 48430 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43330 48430 43330 48460 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43210 48580 42800 48580 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43330 48460 43210 48580 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 48354 43254 48354 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43333 48427 43333 48033 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43330 48430 43333 48427 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43330 48430 43330 48430 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43254 48354 43330 48430 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40820 46830 40930 46830 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41140 47500 40970 47670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41140 47040 41140 47500 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40930 46830 41140 47040 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41220 45400 41220 45790 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41300 45870 41460 45870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41220 45790 41300 45870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40810 46530 41290 46530 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41460 46360 41460 45870 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41290 46530 41460 46360 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40282 46360 40640 46360 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40810 46820 40810 46530 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40820 46830 40810 46820 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40820 46830 40820 46830 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40820 46540 40820 46830 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40640 46360 40820 46540 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39780 47910 39780 48260 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39780 48260 40400 48880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40971 48033 40971 47671 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40971 47671 40970 47670 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40970 47670 40970 47670 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40650 49130 40870 49130 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40400 48880 40650 49130 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40400 48880 40400 48880 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40970 47670 40400 48240 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40400 48240 40400 48880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40870 49130 41150 49130 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41150 49130 41360 48920 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40870 49130 40020 49130 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39860 49310 39860 49635 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39850 49300 39860 49310 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 39850 49300 39850 49300 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40020 49130 39850 49300 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41360 48920 41360 49440 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41360 49440 41650 49730 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41650 49730 41810 49730 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41810 49730 41810 49730 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41810 49730 41810 49740 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41810 49740 41715 49645 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41715 49645 41430 49645 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39860 49635 40095 49635 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40490 50030 40490 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40095 49635 40490 50030 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41900 50880 42040 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41810 50790 41900 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41810 49740 41810 50790 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43530 44490 44570 44490 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44690 44610 44690 44790 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44570 44490 44690 44610 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45460 44440 46422 44440 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46422 44440 46496 44366 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44690 44790 45240 44790 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45440 44460 45460 44440 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45440 44590 45440 44460 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45240 44790 45440 44590 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46580 43350 46580 43360 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46580 43360 46740 43520 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46740 43520 46740 44122 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46740 44122 46496 44366 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 41680 46360 42126 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 42126 46360 42850 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 42850 46580 43070 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46580 43070 46580 43350 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 40920 46360 41300 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46360 41300 46360 41680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45785 40080 45785 40185 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45630 40340 45380 40340 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45785 40185 45630 40340 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45250 39840 45280 39840 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45380 39940 45380 40340 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45280 39840 45380 39940 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46670 49290 46900 49290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46930 50290 46670 50290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 47020 50200 46930 50290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 47020 49410 47020 50200 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46900 49290 47020 49410 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46870 48580 46870 49200 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46870 49200 46670 49290 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 45205 42642 45992 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 45992 42642 46780 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 46780 42642 47567 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 C00
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42642 47567 42642 48354 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 20 0 C00
Po 0 41955 44490 41955 43683 60 -1
De 15 0 21 0 800
Po 0 41955 43683 41870 43598 60 -1
De 15 0 21 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41955 44490 41955 44915 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 21 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41820 45050 41820 45400 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 21 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41870 45000 41820 45050 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 21 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41870 45000 41870 45000 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 21 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41955 44915 41870 45000 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 21 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41820 45400 41820 45860 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 21 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41820 45860 41810 45870 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 21 0 400
Po 0 43248 42854 43248 42874 60 -1
De 15 0 22 0 0
Po 0 43027 43618 43169 43618 60 -1
De 15 0 22 0 400
Po 0 42894 43485 43027 43618 60 -1
De 15 0 22 0 0
Po 0 42894 43228 42894 43485 60 -1
De 15 0 22 0 0
Po 0 43248 42874 42894 43228 60 -1
De 15 0 22 0 0
Po 0 43133 44057 43133 43654 60 -1
De 15 0 22 0 0
Po 0 43133 43654 43169 43618 60 -1
De 15 0 22 0 400
Po 0 42939 44490 42939 44251 60 -1
De 15 0 22 0 800
Po 0 42939 44251 43133 44057 60 -1
De 15 0 22 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43425 42677 43598 42677 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 22 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43248 42854 43425 42677 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 22 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43248 42854 43248 42854 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 22 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43598 42677 43598 42268 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 22 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43598 42268 43622 42244 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 22 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46375 40080 46375 40525 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 23 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46375 40525 46360 40540 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 23 0 400
Po 0 42546 44490 42546 43609 60 -1
De 15 0 24 0 800
Po 0 42546 43609 42539 43602 60 -1
De 15 0 24 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43825 46557 44347 46557 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 25 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44347 46557 44360 46570 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 25 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45564 46710 45560 46710 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45560 46710 45420 46570 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 26 0 0
Po 0 44710 46570 45420 46570 60 -1
De 15 0 26 0 800
Po 0 45564 46710 45564 48936 60 -1
De 0 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45420 46570 45420 46570 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45430 49070 45430 49070 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45564 48936 45430 49070 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45435 49445 45800 49810 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45435 49075 45435 49445 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45430 49070 45435 49075 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 26 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45800 49810 45800 50055 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 26 0 400
Po 0 43825 46754 44034 46754 60 -1
De 15 0 27 0 800
Po 0 44230 46950 44360 46950 60 -1
De 15 0 27 0 400
Po 0 44034 46754 44230 46950 60 -1
De 15 0 27 0 0
Po 0 40971 44490 40971 43620 60 -1
De 15 0 28 0 800
Po 0 40971 43620 40949 43598 60 -1
De 15 0 28 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44390 44310 44880 44310 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45010 44440 45110 44440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44880 44310 45010 44440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43333 44277 43333 44490 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43470 44140 43333 44277 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44220 44140 43470 44140 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44390 44310 44220 44140 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45320 43836 45320 43980 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45110 44190 45110 44440 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45320 43980 45110 44190 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 29 0 0
Po 0 43587 43618 44042 43618 100 -1
De 15 0 30 0 800
Po 0 44042 43618 44690 42970 100 -1
De 15 0 30 0 400
Po 0 43587 43618 43587 43823 100 -1
De 15 0 30 0 800
Po 0 43587 43823 43136 44274 100 -1
De 15 0 30 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43136 44274 43136 44490 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 30 0 400
Po 0 43370 50010 43370 49980 60 -1
De 0 0 31 0 800
Po 0 43370 49980 43720 49630 60 -1
De 0 0 31 0 400
Po 0 43720 49630 43720 49650 60 -1
De 0 0 31 0 800
Po 0 44083 49287 44170 49290 60 -1
De 0 0 31 0 400
Po 0 43720 49650 44083 49287 60 -1
De 0 0 31 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45550 41665 45995 41665 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 32 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45995 41665 46010 41680 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 32 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44710 46950 45100 46950 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 33 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45300 49520 45300 50055 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 33 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45120 49340 45300 49520 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45120 49340 45120 49340 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45120 48980 45120 49340 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45440 48660 45120 48980 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45440 47290 45440 48660 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45320 47170 45440 47290 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 45320 47170 45320 47170 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45100 46950 45320 47170 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 33 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39600 45480 39600 44090 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 34 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39800 43920 39770 43920 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 34 0 800
Po 0 39770 43920 39600 44090 60 -1
De 0 0 34 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39693 45573 39690 45570 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 34 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 39690 45570 39690 45570 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 34 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39693 45573 40282 45573 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 34 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39600 45480 39690 45570 60 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 34 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40250 40860 40560 40860 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 35 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40560 40860 40257 40860 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40560 40860 40560 40860 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44220 41940 44220 41540 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43643 40917 43620 40940 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 43620 40940 43620 40940 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43620 40940 44220 41540 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43643 40917 43643 39933 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44220 41940 44210 41950 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44082 42078 43643 42078 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44210 41950 44082 42078 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44210 41950 44210 41950 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41720 39930 41010 39930 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 35 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41010 39933 40257 39933 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41010 39930 41010 39933 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41010 39930 41010 39930 350 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 35 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43643 39933 40257 39933 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 C00
Po 0 40257 39933 40257 40860 200 -1
De 15 0 35 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40257 40860 40257 42078 200 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 35 0 400
Po 0 40840 42680 39920 42680 100 -1
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39690 42940 39680 42940 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39680 42950 39690 42940 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39680 42920 39680 42950 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39810 42790 39680 42920 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 39810 42790 39810 42790 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39920 42680 39810 42790 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 43630 44729 42631 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46010 42680 46010 42850 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45840 42510 46010 42680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44930 42510 45840 42510 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44890 42470 44930 42510 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44890 42470 44890 42470 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44729 42631 44890 42470 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46080 48620 46080 49520 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46080 49520 44840 50760 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
Po 0 44840 50760 42760 50760 100 -1
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46960 47740 46080 48620 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46960 44140 46960 47740 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46670 43850 46960 44140 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46290 43850 46670 43850 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 44840 50760 44840 50760 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42400 50400 42140 50400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42760 50760 42400 50400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40840 50880 41070 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41550 50400 42140 50400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41070 50880 41550 50400 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 41070 50880 41070 50880 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42145 50395 42430 50395 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42140 50400 42145 50395 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 42140 50400 42140 50400 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 41995 50395 42430 50395 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39800 43570 39800 43500 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39800 43500 39680 43380 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 40890 42630 40890 42630 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40890 42630 40840 42680 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 39680 42940 39680 43380 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42430 50395 42430 50840 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42430 50840 42390 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40860 50385 40860 50860 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40860 50860 40840 50880 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40890 42630 42560 42630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 44140 43630 44729 43630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43700 43190 44140 43630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 43120 43190 43700 43190 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 42560 42630 43120 43190 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 3 46290 43850 46290 43850 220 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 1 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46290 43850 45980 43540 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 45980 43540 45980 43350 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40655 42120 40655 42395 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40655 42395 40890 42630 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40580 41680 40580 42045 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 40580 42045 40655 42120 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 0 0 36 0 400
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46010 42850 46010 43320 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 800
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
Po 0 46010 43320 45980 43350 100 -1
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
De 15 0 36 0 400
initial import
2010-08-07 18:20:52 +03:00
$EndTRACK
$ZONE
$EndZONE
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
$CZONE_OUTLINE
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
ZInfo 4C80FF16 20 "GND"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
ZLayer 15
ZAux 6 F
ZClearance 200 I
ZMinThickness 100
ZOptions 1 16 F 200 200
ZCorner 47244 51181 0
ZCorner 47244 41220 0
ZCorner 46732 41220 0
ZCorner 46732 39331 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
ZCorner 39370 39370 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
ZCorner 39370 51181 1
$POLYSCORNERS
46969 50906 0 0
46969 49097 0 0
46537 49097 0 0
46446 49059 0 0
46376 48989 0 0
46338 48897 0 0
46338 48522 0 0
46338 48520 0 0
46338 48519 0 0
46338 48474 0 0
46298 48434 0 0
46237 48343 0 0
46221 48265 0 0
46178 48309 0 0
46117 48333 0 0
46178 48359 0 0
46248 48429 0 0
46286 48521 0 0
46286 48896 0 0
46248 48987 0 0
46178 49057 0 0
46086 49095 0 0
45790 49095 0 0
45790 49142 0 0
45735 49274 0 0
45715 49293 0 0
45715 49329 0 0
45998 49612 0 0
46029 49658 0 0
46098 49687 0 0
46168 49757 0 0
46206 49849 0 0
46206 50262 0 0
46169 50350 0 0
46184 50388 0 0
46232 50420 0 0
46252 50420 0 0
46384 50475 0 0
46485 50577 0 0
46540 50709 0 0
46540 50852 0 0
46517 50905 1 0
40710 50906 0 0
40710 50808 0 0
40765 50676 0 0
40867 50575 0 0
40999 50520 0 0
41005 50520 0 0
41337 50188 0 0
41435 50123 0 0
41550 50100 0 0
41931 50100 0 0
41937 50095 0 0
42069 50040 0 0
42212 50040 0 0
42344 50095 0 0
42348 50100 0 0
42400 50100 0 0
42515 50123 0 0
42612 50188 0 0
42730 50306 0 0
42730 50288 0 0
42785 50156 0 0
42887 50055 0 0
43019 50000 0 0
43162 50000 0 0
43294 50055 0 0
43298 50060 0 0
44894 50060 0 0
44894 49848 0 0
44932 49757 0 0
45002 49687 0 0
45009 49683 0 0
44916 49645 0 0
44815 49543 0 0
44760 49411 0 0
44760 49268 0 0
44768 49247 0 0
44708 49308 0 0
44617 49369 0 0
44510 49390 0 0
43940 49390 0 0
43940 49392 0 0
43885 49524 0 0
43783 49625 0 0
43651 49680 0 0
43508 49680 0 0
43376 49625 0 0
43361 49609 0 0
43260 49610 0 0
43260 49622 0 0
43205 49754 0 0
43103 49855 0 0
42971 49910 0 0
42910 49910 0 0
42897 49919 0 0
42790 49940 0 0
42720 49940 0 0
42714 49939 0 0
42710 49940 0 0
42500 49940 0 0
42450 49950 0 0
42398 49940 0 0
42110 49940 0 0
42002 49919 0 0
41912 49858 0 0
41853 49800 0 0
41818 49800 0 0
41686 49745 0 0
41585 49643 0 0
41530 49511 0 0
41530 49368 0 0
41585 49236 0 0
41606 49215 0 0
41486 49165 0 0
41385 49063 0 0
41330 48931 0 0
41330 48909 0 0
41220 48909 0 0
41176 48890 0 0
41144 48904 0 0
40595 48904 0 0
40504 48866 0 0
40434 48796 0 0
40396 48704 0 0
40396 48404 0 0
40387 48401 0 0
40317 48331 0 0
40279 48239 0 0
40279 48036 0 0
40075 48036 0 0
39984 47998 0 0
39914 47928 0 0
39902 47899 0 0
39645 47899 0 0
39645 50906 1 0
44338 48706 0 0
45270 47774 0 0
45270 47700 0 0
45291 47593 0 0
45333 47530 0 0
45248 47530 0 0
45116 47475 0 0
45015 47373 0 0
44960 47241 0 0
44960 47232 0 0
44941 47251 0 0
44849 47289 0 0
44699 47289 0 0
44699 47470 0 0
44661 47561 0 0
44591 47631 0 0
44499 47669 0 0
44445 47668 0 0
44361 47753 0 0
44264 47818 0 0
44231 47824 0 0
44231 47837 0 0
44193 47928 0 0
44123 47998 0 0
44031 48036 0 0
43835 48036 0 0
43828 48037 0 0
43828 48240 0 0
43790 48331 0 0
43720 48401 0 0
43628 48439 0 0
43431 48439 0 0
43340 48401 0 0
43332 48393 0 0
43326 48401 0 0
43234 48439 0 0
43037 48439 0 0
42841 48439 0 0
42840 48439 0 0
42788 48439 0 0
42789 48441 0 0
42789 48530 0 0
42815 48557 0 0
42870 48689 0 0
42870 48706 1 0
40970 47671 0 0
40978 47665 0 0
41070 47627 0 0
41103 47627 0 0
41141 47570 0 0
41039 47570 0 0
41025 47604 0 0
40963 47664 0 0
40964 47665 1 0
40688 46853 0 0
40688 47017 0 0
40725 46993 0 0
40840 46970 0 0
40949 46970 0 0
40949 46141 0 0
40881 46170 0 0
40738 46170 0 0
40688 46149 0 0
40688 46262 0 0
40650 46353 0 0
40642 46359 0 0
40650 46367 0 0
40688 46459 0 0
40688 46656 1 0
46969 45086 0 0
46969 41496 0 0
46732 41496 0 0
46627 41475 0 0
46538 41415 0 0
46478 41326 0 0
46457 41221 0 0
46457 41220 0 0
46457 41220 0 0
46457 40879 0 0
46349 40879 0 0
46349 41060 0 0
46328 41110 0 0
46349 41161 0 0
46349 41440 0 0
46328 41490 0 0
46349 41541 0 0
46349 41820 0 0
46311 41911 0 0
46241 41981 0 0
46149 42019 0 0
45870 42019 0 0
45803 41991 0 0
45749 42014 0 0
45440 42014 0 0
45244 42210 0 0
45840 42210 0 0
45955 42233 0 0
46052 42298 0 0
46222 42468 0 0
46287 42565 0 0
46294 42602 0 0
46311 42619 0 0
46349 42711 0 0
46349 42990 0 0
46333 43026 0 0
46354 43076 0 0
46353 43490 0 0
46362 43490 0 0
46494 43545 0 0
46595 43647 0 0
46650 43779 0 0
46650 43922 0 0
46595 44054 0 0
46493 44155 0 0
46361 44210 0 0
46218 44210 0 0
46086 44155 0 0
45985 44053 0 0
45930 43921 0 0
45930 43914 0 0
45840 43824 0 0
45805 43824 0 0
45795 43819 0 0
45795 44161 0 0
45757 44252 0 0
45687 44322 0 0
45595 44360 0 0
45449 44360 0 0
45449 44580 0 0
45411 44671 0 0
45379 44702 0 0
45789 44702 0 0
45807 44685 0 0
45939 44630 0 0
46082 44630 0 0
46214 44685 0 0
46315 44787 0 0
46338 44842 0 0
46388 44822 0 0
46604 44822 0 0
46804 44905 0 0
46957 45058 1 0
44840 44702 0 0
44809 44671 0 0
44783 44609 0 0
44764 44589 0 0
44653 44590 0 0
44679 44651 0 0
44679 44702 1 0
40309 44210 0 0
40317 44192 0 0
40387 44122 0 0
40479 44084 0 0
40676 44084 0 0
40691 44090 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
40691 43872 0 0
40648 43829 0 0
40610 43737 0 0
40610 43654 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
40383 43880 0 0
40382 43883 0 0
40143 44120 0 0
40154 44125 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
40238 44210 1 0
43918 43318 0 0
44215 43021 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
44215 42849 0 0
44160 42860 0 0
43994 42860 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
43714 43140 0 0
43577 43279 0 0
43727 43279 0 0
43818 43317 0 0
43819 43318 1 0
42614 43263 0 0
42614 43228 0 0
42635 43121 0 0
42692 43035 0 0
42512 43035 0 0
42512 43263 1 0
41346 42948 0 0
41326 42927 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
41288 42835 0 0
41288 41950 0 0
41326 41859 0 0
41396 41789 0 0
41488 41751 0 0
41670 41751 0 0
41670 41486 0 0
41644 41460 0 0
41608 41460 0 0
41476 41405 0 0
41419 41348 0 0
41375 41393 0 0
41211 41461 0 0
41034 41461 0 0
40870 41393 0 0
40745 41267 0 0
40736 41246 0 0
40644 41285 0 0
40607 41285 0 0
40607 41475 0 0
40622 41475 0 0
40713 41513 0 0
40783 41583 0 0
40821 41675 0 0
40821 42270 0 0
40962 42270 0 0
41094 42325 0 0
41195 42427 0 0
41250 42559 0 0
41250 42702 0 0
41195 42834 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
41110 42917 0 0
41180 42947 0 0
41181 42948 1 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
44545 41316 0 0
44550 41315 0 0
44694 41315 0 0
44700 41309 0 0
44856 41245 0 0
44980 41245 0 0
44980 41200 0 0
45003 41085 0 0
45068 40988 0 0
45151 40904 0 0
45151 40765 0 0
45189 40674 0 0
45259 40604 0 0
45351 40566 0 0
45671 40566 0 0
45671 40400 0 0
45709 40309 0 0
45779 40239 0 0
45871 40201 0 0
45969 40201 0 0
45969 39873 0 0
46007 39782 0 0
46077 39712 0 0
46169 39674 0 0
46457 39674 0 0
46457 39645 0 0
45215 39645 0 0
45239 39701 0 0
45239 39785 0 0
45250 39840 0 0
45250 40220 0 0
45223 40354 0 0
45154 40457 0 0
45154 40615 0 0
45116 40706 0 0
45046 40776 0 0
44954 40814 0 0
44949 40814 0 0
44949 41065 0 0
44911 41156 0 0
44841 41226 0 0
44749 41264 0 0
44554 41263 0 0
44550 41265 0 0
44389 41265 0 0
44389 41295 0 0
44393 41316 1 0
$endPOLYSCORNERS
$FILLSEGMENTS
46221 48265 46221 48265
46146 48345 46238 48345
46244 48425 46291 48425
46280 48505 46338 48505
46286 48585 46338 48585
46286 48665 46338 48665
46286 48745 46338 48745
46286 48825 46338 48825
46282 48905 46341 48905
46248 48985 46374 48985
46158 49065 46460 49065
45788 49145 46969 49145
45755 49225 46969 49225
45715 49305 46969 49305
45771 49385 46969 49385
45851 49465 46969 49465
45931 49545 46969 49545
46007 49625 46969 49625
46116 49705 46969 49705
46180 49785 46969 49785
46206 49865 46969 49865
46206 49945 46969 49945
46206 50025 46969 50025
46206 50105 46969 50105
46206 50185 46969 50185
46204 50265 46969 50265
46171 50345 46969 50345
46264 50425 46969 50425
46414 50505 46969 50505
46489 50585 46969 50585
46522 50665 46969 50665
46540 50745 46969 50745
46540 50825 46969 50825
46517 50905 46969 50905
39645 47899 39902 47899
39645 47979 39965 47979
39645 48059 40279 48059
39645 48139 40279 48139
39645 48219 40279 48219
39645 48299 40303 48299
39645 48379 40365 48379
39645 48459 40396 48459
39645 48539 40396 48539
39645 48619 40396 48619
39645 48699 40396 48699
39645 48779 40426 48779
39645 48859 40497 48859
39645 48939 41333 48939
39645 49019 41366 49019
39645 49099 41420 49099
39645 49179 41519 49179
39645 49259 41576 49259
44756 49259 44764 49259
39645 49339 41543 49339
44661 49339 44760 49339
39645 49419 41530 49419
43928 49419 44763 49419
39645 49499 41530 49499
43895 49499 44796 49499
39645 49579 41558 49579
43829 49579 44850 49579
39645 49659 41600 49659
43244 49659 43457 49659
43701 49659 44950 49659
39645 49739 41680 49739
43211 49739 44950 49739
39645 49819 41872 49819
43139 49819 44907 49819
39645 49899 41972 49899
42997 49899 44894 49899
39645 49979 44894 49979
39645 50059 42024 50059
42258 50059 42883 50059
43298 50059 44894 50059
39645 50139 41411 50139
42539 50139 42803 50139
39645 50219 41306 50219
42643 50219 42759 50219
39645 50299 41226 50299
42723 50299 42730 50299
39645 50379 41146 50379
39645 50459 41066 50459
39645 50539 40954 50539
39645 50619 40823 50619
39645 50699 40756 50699
39645 50779 40723 50779
39645 50859 40710 50859
44960 47232 44960 47232
44699 47312 44989 47312
44699 47392 45033 47392
44698 47472 45113 47472
44664 47552 45319 47552
44588 47632 45284 47632
44401 47712 45270 47712
44302 47792 45252 47792
44216 47872 45172 47872
44169 47952 45092 47952
44040 48032 45012 48032
43828 48112 44932 48112
43828 48192 44852 48192
43814 48272 44772 48272
43769 48352 44692 48352
43250 48432 43414 48432
43644 48432 44612 48432
42789 48512 44532 48512
42830 48592 44452 48592
42863 48672 44372 48672
41039 47570 41141 47570
40977 47650 41015 47650
40949 46141 40949 46141
40688 46221 40949 46221
40671 46301 40949 46301
40656 46381 40949 46381
40688 46461 40949 46461
40688 46541 40949 46541
40688 46621 40949 46621
40688 46701 40949 46701
40688 46781 40949 46781
40688 46861 40949 46861
40688 46941 40949 46941
46349 40879 46457 40879
46349 40959 46457 40959
46349 41039 46457 41039
46332 41119 46457 41119
46349 41199 46457 41199
46349 41279 46468 41279
46349 41359 46500 41359
46349 41439 46573 41439
46340 41519 46969 41519
46349 41599 46969 41599
46349 41679 46969 41679
46349 41759 46969 41759
46341 41839 46969 41839
46303 41919 46969 41919
45784 41999 45822 41999
46197 41999 46969 41999
45375 42079 46969 42079
45295 42159 46969 42159
45964 42239 46969 42239
46073 42319 46969 42319
46153 42399 46969 42399
46230 42479 46969 42479
46283 42559 46969 42559
46320 42639 46969 42639
46349 42719 46969 42719
46349 42799 46969 42799
46349 42879 46969 42879
46349 42959 46969 42959
46339 43039 46969 43039
46353 43119 46969 43119
46353 43199 46969 43199
46353 43279 46969 43279
46353 43359 46969 43359
46353 43439 46969 43439
46432 43519 46969 43519
46548 43599 46969 43599
46609 43679 46969 43679
46642 43759 46969 43759
45795 43839 45855 43839
46650 43839 46969 43839
45795 43919 45930 43919
46650 43919 46969 43919
45795 43999 45962 43999
46617 43999 46969 43999
45795 44079 46010 44079
46569 44079 46969 44079
45795 44159 46095 44159
46483 44159 46969 44159
45762 44239 46969 44239
45690 44319 46969 44319
45449 44399 46969 44399
45449 44479 46969 44479
45449 44559 46969 44559
45424 44639 45918 44639
46104 44639 46969 44639
46248 44719 46969 44719
46321 44799 46969 44799
46742 44879 46969 44879
46858 44959 46969 44959
46938 45039 46969 45039
44764 44589 44764 44589
44679 44669 44808 44669
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
40610 43654 40610 43654
40529 43734 40610 43734
40449 43814 40641 43814
40370 43894 40691 43894
40290 43974 40691 43974
40209 44054 40691 44054
40163 44134 40375 44134
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
44215 42849 44215 42849
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
43925 42929 44215 42929
43845 43009 44215 43009
43765 43089 44147 43089
43685 43169 44067 43169
43606 43249 43987 43249
42512 43035 42692 43035
42512 43115 42639 43115
42512 43195 42621 43195
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
40735 41246 40736 41246
40607 41326 40803 41326
40607 41406 40901 41406
41343 41406 41478 41406
40649 41486 41670 41486
40766 41566 41670 41566
40810 41646 41670 41646
40821 41726 41670 41726
40821 41806 41379 41806
40821 41886 41315 41886
40821 41966 41288 41966
40821 42046 41288 42046
40821 42126 41288 42126
40821 42206 41288 42206
41001 42286 41288 42286
41135 42366 41288 42366
41203 42446 41288 42446
41237 42526 41288 42526
41250 42606 41288 42606
41250 42686 41288 42686
41223 42766 41288 42766
41182 42846 41292 42846
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
41131 42926 41325 42926
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
45215 39645 46457 39645
45239 39725 46064 39725
45243 39805 45998 39805
45250 39885 45969 39885
45250 39965 45969 39965
45250 40045 45969 40045
45250 40125 45969 40125
45250 40205 45862 40205
45236 40285 45733 40285
45215 40365 45686 40365
45162 40445 45671 40445
45154 40525 45671 40525
45154 40605 45258 40605
45124 40685 45185 40685
45057 40765 45151 40765
44949 40845 45151 40845
44949 40925 45131 40925
44949 41005 45057 41005
44940 41085 45003 41085
44902 41165 44987 41165
44795 41245 44856 41245
$endFILLSEGMENTS
$endCZONE_OUTLINE
$CZONE_OUTLINE
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
ZInfo 4C80FF55 20 "GND"
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
ZLayer 0
ZAux 6 F
ZClearance 200 I
ZMinThickness 100
ZOptions 1 16 F 200 200
ZCorner 47244 51181 0
ZCorner 47244 41220 0
ZCorner 46732 41220 0
ZCorner 46732 39370 0
ZCorner 39370 39370 0
ZCorner 39370 51181 1
$POLYSCORNERS
42051 50906 0 0
42051 50752 0 0
41936 50705 0 0
41909 50677 0 0
41880 50672 0 0
41798 50617 0 0
41791 50636 0 0
41721 50706 0 0
41629 50744 0 0
41402 50744 0 0
41430 50809 0 0
41430 50906 1 0
40501 50906 0 0
40501 50740 0 0
40533 50660 0 0
40499 50626 0 0
40461 50534 0 0
40461 50235 0 0
40478 50194 0 0
40259 49975 0 0
40259 50160 0 0
40243 50197 0 0
40259 50236 0 0
40259 50535 0 0
40221 50626 0 0
40151 50696 0 0
40059 50734 0 0
39660 50734 0 0
39645 50727 0 0
39645 50906 1 0
46969 50451 0 0
46969 50128 0 0
46944 50139 0 0
46480 50139 0 0
46480 50441 0 0
46945 50441 1 0
44801 49510 0 0
44760 49411 0 0
44760 49268 0 0
44815 49136 0 0
44840 49111 0 0
44840 48980 0 0
44861 48873 0 0
44909 48800 0 0
44187 48800 0 0
44140 48780 0 0
44140 48941 0 0
44445 48941 0 0
44536 48979 0 0
44606 49049 0 0
44644 49141 0 0
44644 49440 0 0
44614 49510 1 0
46969 49451 0 0
46969 48155 0 0
46797 48325 0 0
46821 48349 0 0
46859 48441 0 0
46859 48720 0 0
46821 48811 0 0
46751 48881 0 0
46659 48919 0 0
46594 48919 0 0
46575 48939 0 0
46575 49441 0 0
46945 49441 1 0
40576 49320 0 0
40661 49286 0 0
40867 49286 0 0
40911 49243 0 0
40911 49242 0 0
40912 49242 0 0
41003 49181 0 0
41110 49160 0 0
41481 49160 0 0
41385 49063 0 0
41330 48931 0 0
41330 48788 0 0
41385 48656 0 0
41436 48605 0 0
41492 48522 0 0
41610 48404 0 0
41610 48368 0 0
41665 48236 0 0
41767 48135 0 0
41899 48080 0 0
42042 48080 0 0
42174 48135 0 0
42275 48237 0 0
42330 48369 0 0
42330 48445 0 0
42439 48400 0 0
42582 48400 0 0
42714 48455 0 0
42815 48557 0 0
42870 48689 0 0
42870 48832 0 0
42815 48964 0 0
42713 49065 0 0
42636 49096 0 0
42704 49125 0 0
42786 49207 0 0
42829 49190 0 0
42913 49190 0 0
43261 48842 0 0
43352 48781 0 0
43458 48760 0 0
43458 48750 0 0
43458 47986 0 0
43401 48010 0 0
43258 48010 0 0
43126 47955 0 0
43025 47853 0 0
42970 47721 0 0
42970 47578 0 0
43025 47446 0 0
43030 47441 0 0
43030 45510 0 0
43040 45460 0 0
43040 45368 0 0
43095 45236 0 0
43187 45143 0 0
43083 45040 0 0
42230 45040 0 0
42230 45072 0 0
42194 45158 0 0
42194 45675 0 0
42156 45766 0 0
42149 45773 0 0
42149 46010 0 0
42111 46101 0 0
42041 46171 0 0
41949 46209 0 0
41670 46209 0 0
41579 46171 0 0
41509 46101 0 0
41471 46009 0 0
41471 45734 0 0
41446 45674 0 0
41446 45255 0 0
41389 45279 0 0
41137 45279 0 0
41111 45290 0 0
40968 45290 0 0
40964 45288 0 0
40925 45384 0 0
40858 45450 0 0
40882 45450 0 0
41014 45505 0 0
41115 45607 0 0
41170 45739 0 0
41170 45882 0 0
41126 45986 0 0
41149 46041 0 0
41149 46320 0 0
41111 46411 0 0
41041 46481 0 0
40949 46519 0 0
40810 46519 0 0
40810 47047 0 0
40924 47095 0 0
41025 47197 0 0
41050 47257 0 0
41050 47248 0 0
41105 47116 0 0
41207 47015 0 0
41339 46960 0 0
41482 46960 0 0
41614 47015 0 0
41623 47024 0 0
41715 47043 0 0
41812 47108 0 0
42023 47320 0 0
42032 47320 0 0
42164 47375 0 0
42265 47477 0 0
42320 47609 0 0
42320 47752 0 0
42265 47884 0 0
42163 47985 0 0
42031 48040 0 0
41888 48040 0 0
41756 47985 0 0
41655 47883 0 0
41600 47751 0 0
41600 47744 0 0
41519 47663 0 0
41481 47680 0 0
41338 47680 0 0
41206 47625 0 0
41105 47523 0 0
41080 47463 0 0
41080 47472 0 0
41025 47604 0 0
40923 47705 0 0
40791 47760 0 0
40648 47760 0 0
40516 47705 0 0
40415 47603 0 0
40400 47567 0 0
40400 49044 0 0
40498 49142 0 0
40559 49233 1 0
43988 45152 0 0
43988 44958 0 0
44026 44867 0 0
44081 44810 0 0
44026 44755 0 0
43988 44663 0 0
43988 44314 0 0
43293 43620 0 0
43040 43620 0 0
42932 43599 0 0
42842 43538 0 0
42423 43120 0 0
41004 43120 0 0
41004 43320 0 0
40966 43411 0 0
40896 43481 0 0
40804 43519 0 0
40710 43519 0 0
40710 44414 0 0
40742 44382 0 0
40832 44321 0 0
40940 44300 0 0
41980 44300 0 0
42087 44321 0 0
42178 44382 0 0
42276 44479 0 0
43200 44480 0 0
43307 44501 0 0
43398 44562 1 0
45422 44857 0 0
45489 44830 0 0
45632 44830 0 0
45678 44849 0 0
45705 44786 0 0
45807 44685 0 0
45939 44630 0 0
46082 44630 0 0
46214 44685 0 0
46315 44787 0 0
46338 44842 0 0
46388 44822 0 0
46604 44822 0 0
46660 44845 0 0
46660 44264 0 0
46546 44150 0 0
46498 44149 0 0
46493 44155 0 0
46361 44210 0 0
46218 44210 0 0
46086 44155 0 0
45985 44053 0 0
45930 43921 0 0
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
45930 43778 0 0
45985 43646 0 0
46087 43545 0 0
46219 43490 0 0
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
46362 43490 0 0
46494 43545 0 0
46498 43549 0 0
46670 43550 0 0
46785 43573 0 0
46882 43638 0 0
46969 43725 0 0
46969 41496 0 0
46732 41496 0 0
46627 41475 0 0
46538 41415 0 0
46478 41326 0 0
46457 41221 0 0
46457 41220 0 0
46457 41220 0 0
46457 39645 0 0
42269 39645 0 0
42269 40200 0 0
43325 40200 0 0
43737 39787 0 0
43835 39723 0 0
43950 39700 0 0
44680 39700 0 0
44795 39723 0 0
44892 39788 0 0
45422 40317 0 0
45487 40415 0 0
45510 40530 0 0
45510 40725 0 0
45614 40830 0 0
45622 40830 0 0
45754 40885 0 0
45855 40987 0 0
45910 41119 0 0
45910 41262 0 0
45855 41394 0 0
45753 41495 0 0
45621 41550 0 0
45478 41550 0 0
45346 41495 0 0
45314 41463 0 0
45365 41586 0 0
45365 41755 0 0
45300 41911 0 0
45180 42031 0 0
45024 42095 0 0
44855 42095 0 0
44699 42030 0 0
44688 42020 0 0
44635 42020 0 0
44635 42035 0 0
44570 42191 0 0
44450 42311 0 0
44294 42375 0 0
44125 42375 0 0
43969 42310 0 0
43961 42302 0 0
43961 42376 0 0
43972 42403 0 0
43972 42952 0 0
43946 43012 0 0
44138 43204 0 0
44188 43184 0 0
44429 43184 0 0
44429 42631 0 0
44452 42516 0 0
44517 42419 0 0
44530 42405 0 0
44530 42398 0 0
44585 42266 0 0
44687 42165 0 0
44819 42110 0 0
44962 42110 0 0
45094 42165 0 0
45195 42267 0 0
45250 42399 0 0
45250 42542 0 0
45195 42674 0 0
45093 42775 0 0
45029 42801 0 0
45029 43184 0 0
45271 43184 0 0
45362 43222 0 0
45432 43292 0 0
45470 43384 0 0
45470 43877 0 0
45432 43968 0 0
45376 44023 0 0
45432 44079 0 0
45470 44171 0 0
45470 44664 0 0
45432 44755 0 0
45375 44810 1 0
41064 42312 0 0
41064 42132 0 0
41102 42041 0 0
41172 41971 0 0
41232 41946 0 0
41172 41921 0 0
41102 41851 0 0
41064 41759 0 0
41064 41461 0 0
41034 41461 0 0
40870 41393 0 0
40745 41267 0 0
40736 41246 0 0
40644 41285 0 0
40475 41285 0 0
40319 41220 0 0
40309 41210 0 0
40250 41210 0 0
40195 41199 0 0
40110 41199 0 0
40019 41161 0 0
39949 41091 0 0
39911 40999 0 0
39911 40987 0 0
39881 41000 0 0
39738 41000 0 0
39645 40961 0 0
39645 41778 0 0
39664 41759 0 0
39756 41721 0 0
40055 41721 0 0
40146 41759 0 0
40216 41829 0 0
40254 41921 0 0
40254 42078 0 0
40294 42118 0 0
40280 42045 0 0
40280 41912 0 0
40279 41911 0 0
40241 41819 0 0
40241 41540 0 0
40279 41449 0 0
40349 41379 0 0
40441 41341 0 0
40720 41341 0 0
40811 41379 0 0
40881 41449 0 0
40919 41541 0 0
40919 41782 0 0
40966 41829 0 0
41004 41921 0 0
41004 42287 1 0
$endPOLYSCORNERS
$FILLSEGMENTS
41798 50617 41798 50617
41730 50697 41928 50697
41417 50777 42051 50777
41430 50857 42051 50857
40259 49975 40259 49975
40259 50055 40339 50055
40259 50135 40419 50135
40251 50215 40470 50215
40259 50295 40461 50295
40259 50375 40461 50375
40259 50455 40461 50455
40259 50535 40461 50535
40225 50615 40494 50615
40152 50695 40519 50695
39645 50775 40501 50775
39645 50855 40501 50855
46969 50128 46969 50128
46480 50208 46969 50208
46480 50288 46969 50288
46480 50368 46969 50368
46962 50448 46969 50448
44140 48780 44140 48780
44140 48860 44870 48860
44140 48940 44848 48940
44577 49020 44840 49020
44628 49100 44840 49100
44644 49180 44797 49180
44644 49260 44764 49260
44644 49340 44760 49340
44644 49420 44763 49420
44618 49500 44796 49500
46969 48155 46969 48155
46888 48235 46969 48235
46807 48315 46969 48315
46840 48395 46969 48395
46859 48475 46969 48475
46859 48555 46969 48555
46859 48635 46969 48635
46859 48715 46969 48715
46827 48795 46969 48795
46757 48875 46969 48875
46575 48955 46969 48955
46575 49035 46969 49035
46575 49115 46969 49115
46575 49195 46969 49195
46575 49275 46969 49275
46575 49355 46969 49355
46575 49435 46969 49435
42230 45040 43083 45040
42209 45120 43163 45120
42194 45200 43131 45200
41134 45280 41446 45280
42194 45280 43077 45280
40934 45360 41446 45360
42194 45360 43044 45360
40868 45440 41446 45440
42194 45440 43040 45440
41029 45520 41446 45520
42194 45520 43030 45520
41109 45600 41446 45600
42194 45600 43030 45600
41146 45680 41448 45680
42191 45680 43030 45680
41170 45760 41471 45760
42158 45760 43030 45760
41170 45840 41471 45840
42149 45840 43030 45840
41153 45920 41471 45920
42149 45920 43030 45920
41132 46000 41471 46000
42149 46000 43030 46000
41149 46080 41500 46080
42119 46080 43030 46080
41149 46160 41568 46160
42052 46160 43030 46160
41149 46240 43030 46240
41149 46320 43030 46320
41115 46400 43030 46400
41042 46480 43030 46480
40810 46560 43030 46560
40810 46640 43030 46640
40810 46720 43030 46720
40810 46800 43030 46800
40810 46880 43030 46880
40810 46960 41339 46960
41482 46960 43030 46960
40810 47040 41182 47040
41701 47040 43030 47040
40949 47120 41104 47120
41824 47120 43030 47120
41027 47200 41070 47200
41904 47200 43030 47200
41984 47280 43030 47280
42128 47360 43030 47360
42229 47440 43030 47440
41060 47520 41103 47520
42283 47520 42995 47520
40400 47600 40413 47600
41026 47600 41181 47600
42317 47600 42970 47600
40400 47680 40491 47680
40948 47680 41536 47680
42320 47680 42970 47680
40400 47760 41603 47760
42316 47760 42986 47760
40400 47840 41637 47840
42283 47840 43019 47840
40400 47920 41691 47920
42228 47920 43091 47920
40400 48000 41792 48000
42127 48000 43234 48000
43424 48000 43458 48000
40400 48080 41899 48080
42042 48080 43458 48080
40400 48160 41742 48160
42199 48160 43458 48160
40400 48240 41664 48240
42277 48240 43458 48240
40400 48320 41630 48320
42310 48320 43458 48320
40400 48400 41610 48400
42330 48400 42439 48400
42582 48400 43458 48400
40400 48480 41534 48480
42739 48480 43458 48480
40400 48560 41467 48560
42817 48560 43458 48560
40400 48640 41401 48640
42850 48640 43458 48640
40400 48720 41359 48720
42870 48720 43458 48720
40400 48800 41330 48800
42870 48800 43324 48800
40400 48880 41330 48880
42850 48880 43223 48880
40400 48960 41342 48960
42816 48960 43143 48960
40400 49040 41375 49040
42738 49040 43063 49040
40476 49120 41441 49120
42693 49120 42983 49120
40537 49200 40975 49200
42779 49200 42804 49200
40569 49280 40874 49280
41004 43120 42423 43120
41004 43200 42503 43200
41004 43280 42583 43280
40987 43360 42663 43360
40937 43440 42743 43440
40710 43520 42823 43520
40710 43600 42937 43600
40710 43680 43353 43680
40710 43760 43433 43760
40710 43840 43513 43840
40710 43920 43593 43920
40710 44000 43673 44000
40710 44080 43753 44080
40710 44160 43833 44160
40710 44240 43913 44240
40710 44320 40838 44320
42082 44320 43988 44320
40710 44400 40724 44400
42197 44400 43988 44400
43200 44480 43988 44480
43396 44560 43988 44560
43476 44640 43988 44640
43556 44720 44011 44720
43636 44800 44071 44800
43716 44880 44021 44880
43796 44960 43988 44960
43876 45040 43988 45040
43956 45120 43988 45120
42269 39645 46457 39645
42269 39725 43832 39725
44798 39725 46457 39725
42269 39805 43720 39805
44910 39805 46457 39805
42269 39885 43640 39885
44990 39885 46457 39885
42269 39965 43560 39965
45070 39965 46457 39965
42269 40045 43480 40045
45150 40045 46457 40045
42269 40125 43400 40125
45230 40125 46457 40125
45310 40205 46457 40205
45390 40285 46457 40285
45454 40365 46457 40365
45493 40445 46457 40445
45509 40525 46457 40525
45510 40605 46457 40605
45510 40685 46457 40685
45550 40765 46457 40765
45658 40845 46457 40845
45794 40925 46457 40925
45863 41005 46457 41005
45896 41085 46457 41085
45910 41165 46457 41165
45910 41245 46461 41245
45883 41325 46477 41325
45843 41405 46531 41405
45324 41485 45336 41485
45763 41485 46677 41485
45357 41565 46969 41565
45365 41645 46969 41645
45365 41725 46969 41725
45344 41805 46969 41805
45310 41885 46969 41885
45246 41965 46969 41965
44630 42045 44735 42045
45145 42045 46969 42045
44597 42125 44783 42125
44998 42125 46969 42125
44556 42205 44647 42205
45134 42205 46969 42205
44476 42285 44578 42285
45203 42285 46969 42285
43961 42365 44101 42365
44318 42365 44544 42365
45236 42365 46969 42365
43972 42445 44500 42445
45250 42445 46969 42445
43972 42525 44451 42525
45250 42525 46969 42525
43972 42605 44435 42605
45223 42605 46969 42605
43972 42685 44429 42685
45183 42685 46969 42685
43972 42765 44429 42765
45103 42765 46969 42765
43972 42845 44429 42845
45029 42845 46969 42845
43972 42925 44429 42925
45029 42925 46969 42925
43949 43005 44429 43005
45029 43005 46969 43005
44019 43085 44429 43085
45029 43085 46969 43085
44099 43165 44429 43165
45029 43165 46969 43165
45385 43245 46969 43245
45446 43325 46969 43325
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
45470 43405 46969 43405
45470 43485 46969 43485
45470 43565 46067 43565
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
46745 43565 46969 43565
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
45470 43645 45987 43645
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
46889 43645 46969 43645
Remove C2/C4/R3/R4, high speed works now.
2010-10-26 18:44:05 +03:00
45470 43725 45953 43725
45470 43805 45930 43805
45466 43885 45930 43885
The first version send to factory. Changed the PCB a little to avoid conflict with RJ45 connector.
2010-09-05 17:58:44 +03:00
45433 43965 45948 43965
45398 44045 45981 44045
45451 44125 46056 44125
45470 44205 46206 44205
46373 44205 46601 44205
45470 44285 46660 44285
45470 44365 46660 44365
45470 44445 46660 44445
45470 44525 46660 44525
45470 44605 46660 44605
45461 44685 45807 44685
46214 44685 46660 44685
45421 44765 45727 44765
46294 44765 46660 44765
45410 44845 45452 44845
45669 44845 45680 44845
39645 40961 39645 40961
39645 41041 39928 41041
39645 41121 39979 41121
39645 41201 40205 41201
39645 41281 40465 41281
40653 41281 40758 41281
39645 41361 40393 41361
40768 41361 40838 41361
39645 41441 40287 41441
40873 41441 40985 41441
39645 41521 40249 41521
40911 41521 41064 41521
39645 41601 40241 41601
40919 41601 41064 41601
39645 41681 40241 41681
40919 41681 41064 41681
39645 41761 39662 41761
40148 41761 40241 41761
40919 41761 41064 41761
40221 41841 40250 41841
40971 41841 41097 41841
40254 41921 40280 41921
41004 41921 41172 41921
40254 42001 40280 42001
41004 42001 41142 42001
40257 42081 40286 42081
41004 42081 41086 42081
41004 42161 41064 42161
41004 42241 41064 42241
$endFILLSEGMENTS
$endCZONE_OUTLINE
initial import
2010-08-07 18:20:52 +03:00
$EndBOARD
Copy Permalink