qi-hardware/nn-usb-fpga
1
0
Fork 0
mirror of git://projects.qi-hardware.com/nn-usb-fpga.git synced 2025-04-21 12:27:27 +03:00
Code Activity

Adding lm32 demo to SAKC project

Browse Source
This commit is contained in:
Carlos Camargo
2010-05-25 21:49:58 -05:00
parent 26b0c73a84
commit 61d4408f2a
145 changed files with 27924 additions and 1501 deletions
Download Patch File Download Diff File Expand all files Collapse all files

63
lm32/logic/sakc/sim/ddr/ddr_parameters.vh Normal file
View File

@@ -0,0 +1,63 @@
/****************************************************************************************
*
* Disclaimer This software code and all associated documentation, comments or other
* of Warranty: information (collectively "Software") is provided "AS IS" without
* warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY
* DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
* TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES
* OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT
* WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE
* OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
* FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR
* THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS,
* ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE
* OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI,
* ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT,
* INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING,
* WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION,
* OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE
* THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGES. Because some jurisdictions prohibit the exclusion or
* limitation of liability for consequential or incidental damages, the
* above limitation may not apply to you.
*
* Copyright 2003 Micron Technology, Inc. All rights reserved.
*
****************************************************************************************/
// Timing parameters based on Speed Grade
// SYMBOL UNITS DESCRIPTION
// ------ ----- -----------
// `ifdef sg6T // Timing Parameters for -6T (CL = 2.5)
parameter tCK = 6.0; // tCK ns Nominal Clock Cycle Time
parameter tDQSQ = 0.45; // tDQSS ns DQS-DQ skew, DQS to last DQ valid, per group, per access
parameter tMRD = 12.0; // tMRD ns Load Mode Register command cycle time
parameter tRAP = 15.0; // tRAP ns ACTIVE to READ with Auto precharge command
parameter tRAS = 42.0; // tRAS ns Active to Precharge command time
parameter tRC = 60.0; // tRC ns Active to Active/Auto Refresh command time
parameter tRFC = 120.0; // tRFC ns Refresh to Refresh Command interval time
parameter tRCD = 15.0; // tRCD ns Active to Read/Write command time
parameter tRP = 15.0; // tRP ns Precharge command period
parameter tRRD = 12.0; // tRRD ns Active bank a to Active bank b command time
parameter tWR = 15.0; // tWR ns Write recovery time
// Size Parameters based on Part Width
//`else `define x16
parameter ADDR_BITS = 13; // Set this parameter to control how many Address bits are used
parameter DQ_BITS = 16; // Set this parameter to control how many Data bits are used
parameter DQS_BITS = 2; // Set this parameter to control how many DQS bits are used
parameter DM_BITS = 2; // Set this parameter to control how many DM bits are used
parameter COL_BITS = 10; // Set this parameter to control how many Column bits are used
parameter full_mem_bits = 2+ADDR_BITS+COL_BITS; // Set this parameter to control how many unique addresses are used
parameter part_mem_bits = 14; // Set this parameter to control how many unique addresses are used
parameter no_halt = 0; // If set to 1, the model won't halt on command sequence/major errors
parameter Debug = 1; // Turn on debug message