diff --git a/Examples/ADC/QT_src/ADC b/Examples/ADC/QT_src/ADC
deleted file mode 100755
index 40ef590..0000000
Binary files a/Examples/ADC/QT_src/ADC and /dev/null differ
diff --git a/Examples/ADC/QT_src/ADCw.cpp b/Examples/ADC/QT_src/ADCw.cpp
deleted file mode 100644
index 07015b5..0000000
--- a/Examples/ADC/QT_src/ADCw.cpp
+++ /dev/null
@@ -1,77 +0,0 @@
-#include "ADCw.h"
-
-ADCw::ADCw()
-{
-	ADCBuffer = jz_adc_init();
-	/*************************Clean FPGA RAM memory****************************/
-	for (int i = 0; i < 512; i++)     //RAMB16_s9_s9 has 2048 bytes 8-bit
-	{
-		ADCBuffer[i] = 0x00000000; //Clean 4 register by cicle
-	}
-}
-
-void ADCw::testADC()
-{
-	/****************Configure ADC register on FPGA RAM memory*****************/
-	jz_adc_config(ADCBuffer, 0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_SPI_CLKDIV);
-	usleep (1000);
-	jz_adc_config(ADCBuffer, 0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_FAST_CONV);
-	usleep (1000);
-	printf("\nADC in Fast Convertion Mode (10us) and Fs=9.8KHz (Min)\n");
-
-	int LENB = 0xFE; // 254 read/cmd
-
-	/******************************* TEST 1 ***********************************/
-	printf("\nINIT TEST1: Autoselft {(Vref+) - (Vref-)}/2 -> Return 0x0200 \n");
-	jz_adc_config(ADCBuffer, 0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_1);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	usleep (1000);
-	jz_adc_config(ADCBuffer, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_1);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	while(jz_adc_check_buffer(ADCBuffer)){usleep (10);}
-	for(int i=1; i< 512; i++)
-		printf("[%08X]", ADCBuffer[i]);
-	fflush (stdout);
-
-	/******************************* TEST 2 ***********************************/
-	printf("\n\nINIT TEST2: Autoselft (Vref-) -> Return 0x0000 \n");
-	jz_adc_config(ADCBuffer, 0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_2);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	usleep (1000);
-	jz_adc_config(ADCBuffer, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_2);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	while(jz_adc_check_buffer(ADCBuffer)){usleep (10);}
-	for(int i=1; i< 512; i++)
-		printf("[%08X]", ADCBuffer[i]);
-	fflush (stdout);
-
-	/******************************* TEST 3 ***********************************/
-	printf("\n\nINIT TEST3: Autoselft (Vref+) -> Return 0x03FF \n");
-	jz_adc_config(ADCBuffer, 0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_3);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	usleep (1000);
-	jz_adc_config(ADCBuffer, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_3);
-	printf("[%08X]", ADCBuffer[0]);fflush (stdout);
-	while(jz_adc_check_buffer(ADCBuffer)){usleep (10);}
-	for(int i=1; i< 512; i++)
-		printf("[%08X]", ADCBuffer[i]);
-	fflush (stdout);
-
-	printf("\n\nTESTS complete\n");
-}
-
-void ADCw::powerDownADC()
-{
-	jz_adc_config(ADCBuffer,  0x00, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_POWER_DOWN);
-	printf("\nADC in Power Down Mode \n");
-}
-
-JZ_REG* ADCw::takeSamplesADC(int LENB, uchar CLKDIV, int CHANNEL)
-{
-	jz_adc_config(ADCBuffer, 0x00, CLKDIV, ADC_CMD_SET_CHANNEL0+CHANNEL);
-	usleep (1000);
-	jz_adc_config(ADCBuffer, LENB, CLKDIV, ADC_CMD_READ_CHANNEL0+CHANNEL);
-	//while(jz_adc_check_buffer(ADCBuffer)){usleep (400000);printf("[%08X]", ADCBuffer[0]);fflush (stdout);}
-	while(jz_adc_check_buffer(ADCBuffer)){usleep (10);}
-	return ADCBuffer;
-}
diff --git a/Examples/ADC/QT_src/ADCw.h b/Examples/ADC/QT_src/ADCw.h
deleted file mode 100644
index 845e45e..0000000
--- a/Examples/ADC/QT_src/ADCw.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ADCW_H
-#define ADCW_H
-
-#include "jz_adc_peripheral.h"
-#include <stdio.h>
-#include <unistd.h>
-
-class ADCw
-{
-public:
-	ADCw();
-	~ADCw(){};
-
-	void testADC();
-	void powerDownADC();
-	JZ_REG * takeSamplesADC(int LENB, uchar CLKDIV, int CHANNEL);
-private:
-	JZ_REG * ADCBuffer;
-};
-
-#endif // ADCW_H
diff --git a/Examples/ADC/QT_src/mainwindow.cpp b/Examples/ADC/QT_src/mainwindow.cpp
deleted file mode 100755
index 5afe798..0000000
--- a/Examples/ADC/QT_src/mainwindow.cpp
+++ /dev/null
@@ -1,49 +0,0 @@
-#include "mainwindow.h"
-#include "ui_mainwindow.h"
-#include <QDebug>
-
-#include <QTime>
-#include <math.h>
-
-MainWindow::MainWindow(QWidget *parent)
-    : QMainWindow(parent), ui(new Ui::MainWindow)
-{
-    ui->setupUi(this);
-	connect(this,SIGNAL(refresh()),ui->Graph, SLOT(repaint()));
-	ui->Graph->setPointsPerPlot(300);
-	ui->Graph->setVoltsPerDiv(102);
-
-	timer1 =  new QTimer(this);
-	timer1->start(50);
-	connect(timer1, SIGNAL(timeout()), this, SLOT(updateGraph()));
-
-	ADC1 = new ADCw;
-	ADC1->testADC();
-	printf("\nTaking 250 samples each 50ms from Channel 0 at Fs=9.8KHz \n");
-}
-
-MainWindow::~MainWindow()
-{
-    delete ui;
-}
-
-void MainWindow::updateGraph()
-{
-	JZ_REG * dataADC =ADC1->takeSamplesADC(300, 0x08, 1);
-	int tempD;
-
-	for(int i=1; i< 300/2+1; i++)
-	{
-		//printf("[%08X]",dataADC[i]);
-		tempD = dataADC[i]&0xFFFF;
-		ui->Graph->addPoint(tempD);
-		tempD = dataADC[i]>>16; 
-		ui->Graph->addPoint(tempD);
-	}
-	//printf("\n \n *************************************************************** \n\n");
-	//fflush (stdout);
-	/*for(int i = 0; i<100;i++)
-		ui->Graph->addPoint(20*sin(6.2832*i/100)+20);*/
-
-	emit refresh();
-}
diff --git a/Examples/ADC/Scope-QT-src/ADC b/Examples/ADC/Scope-QT-src/ADC
new file mode 100755
index 0000000..96016a3
Binary files /dev/null and b/Examples/ADC/Scope-QT-src/ADC differ
diff --git a/Examples/ADC/QT_src/ADC1.pro b/Examples/ADC/Scope-QT-src/ADC1.pro
similarity index 100%
rename from Examples/ADC/QT_src/ADC1.pro
rename to Examples/ADC/Scope-QT-src/ADC1.pro
diff --git a/Examples/ADC/QT_src/ADC1.pro.user b/Examples/ADC/Scope-QT-src/ADC1.pro.user
similarity index 100%
rename from Examples/ADC/QT_src/ADC1.pro.user
rename to Examples/ADC/Scope-QT-src/ADC1.pro.user
diff --git a/Examples/ADC/Scope-QT-src/ADCw.cpp b/Examples/ADC/Scope-QT-src/ADCw.cpp
new file mode 100644
index 0000000..a295184
--- /dev/null
+++ b/Examples/ADC/Scope-QT-src/ADCw.cpp
@@ -0,0 +1,76 @@
+#include "ADCw.h"
+
+ADCw::ADCw()
+{
+	BUFFER_OFFSET = 8;
+	ADC_SPI_CLKDIV=ADC_SPI_CLKDIV_MAX;  //Set clock to minimum speed
+	BUFFER_LEN=10;
+
+	ADCBuffer = jz_adc_init();
+
+	//Clean FPGA RAM memory
+	for (int i = 0; i < 512; i++)     //RAMB16_s9_s9 has 2048 bytes 8-bit
+	{
+		ADCBuffer[i] = 0x00000000; //Clean 4 register by cicle
+	}
+
+	adcConfig(ADC_CMD_SET_SPI_CLKDIV);
+	adcConfig(ADC_CMD_SET_FAST_CONV);
+	printf("\nADC in Fast Convertion Mode (10us) and Fs=9.8KHz (Min)\n");
+}
+
+void ADCw::testADC()
+{
+	/******************************* TEST 1 ***********************************/
+	printf("\nINIT TEST1: Autoselft {(Vref+) - (Vref-)}/2 -> Return 0x0200 \n");
+	adcConfig(ADC_CMD_SET_AUTOSELFT_1);
+	adcConfig(ADC_CMD_READ_AUTOSELFT_1);
+	while(adcCheckBufferFull())usleep (10);
+	for(int i=BUFFER_OFFSET; i< BUFFER_LEN/2+BUFFER_OFFSET; i++)
+		printf("[%08X]", ADCBuffer[i]);
+	fflush (stdout);
+
+	/******************************* TEST 2 ***********************************/
+	printf("\n\nINIT TEST2: Autoselft (Vref-) -> Return 0x0000 \n");
+	adcConfig(ADC_CMD_SET_AUTOSELFT_2);
+	adcConfig(ADC_CMD_READ_AUTOSELFT_2);
+	while(adcCheckBufferFull())usleep (10);
+	for(int i=BUFFER_OFFSET; i< BUFFER_LEN/2+BUFFER_OFFSET; i++)
+		printf("[%08X]", ADCBuffer[i]);
+	fflush (stdout);
+
+	/******************************* TEST 3 ***********************************/
+	printf("\n\nINIT TEST3: Autoselft (Vref+) -> Return 0x03FF \n");
+	adcConfig(ADC_CMD_SET_AUTOSELFT_3);
+	adcConfig(ADC_CMD_READ_AUTOSELFT_3);
+	for(int i=BUFFER_OFFSET; i< BUFFER_LEN/2+BUFFER_OFFSET; i++)
+		printf("[%08X]", ADCBuffer[i]);
+	fflush (stdout);
+
+	printf("\n\nTESTS complete\n");
+}
+
+void ADCw::powerDownADC()
+{
+	adcConfig(ADC_CMD_SET_POWER_DOWN);
+	printf("\nADC in Power Down Mode \n");
+}
+
+JZ_REG* ADCw::takeSamplesADC(int CHANNEL)
+{
+	adcConfig(ADC_CMD_SET_CHANNEL0+CHANNEL);
+	adcConfig(ADC_CMD_READ_CHANNEL0+CHANNEL);
+	while(adcCheckBufferFull())usleep (10);
+	return (JZ_REG*)(ADCBuffer+BUFFER_OFFSET);
+}
+
+void ADCw::adcConfig(uchar CMD)
+{
+	ADCBuffer[0] = ((BUFFER_LEN+(BUFFER_OFFSET-1)*2) << 16) + (ADC_SPI_CLKDIV<<8) + CMD;
+	usleep (100);
+}
+
+int ADCw::adcCheckBufferFull()
+{
+	return ADCBuffer[0]&0x20;
+}
diff --git a/Examples/ADC/Scope-QT-src/ADCw.h b/Examples/ADC/Scope-QT-src/ADCw.h
new file mode 100644
index 0000000..83eedb7
--- /dev/null
+++ b/Examples/ADC/Scope-QT-src/ADCw.h
@@ -0,0 +1,30 @@
+#ifndef ADCW_H
+#define ADCW_H
+
+#include "jz_adc_peripheral.h"
+#include <stdio.h>
+#include <unistd.h>
+
+class ADCw
+{
+public:
+	ADCw();
+	~ADCw(){}
+
+	void testADC();
+	void powerDownADC();
+	JZ_REG * takeSamplesADC(int CHANNEL);
+	void setClockDiv(uchar value){ ADC_SPI_CLKDIV = value;}
+	void setBufferLen(int  value){ BUFFER_LEN = value;}
+
+private:	
+	void adcConfig(uchar CMD);
+	int adcCheckBufferFull();
+
+	JZ_REG * ADCBuffer;
+	uchar ADC_SPI_CLKDIV;
+	int BUFFER_LEN;
+	int BUFFER_OFFSET;
+};
+
+#endif // ADCW_H
diff --git a/Examples/ADC/QT_src/Makefile b/Examples/ADC/Scope-QT-src/Makefile
similarity index 99%
rename from Examples/ADC/QT_src/Makefile
rename to Examples/ADC/Scope-QT-src/Makefile
index dd3827f..b624c46 100644
--- a/Examples/ADC/QT_src/Makefile
+++ b/Examples/ADC/Scope-QT-src/Makefile
@@ -1,6 +1,6 @@
 #############################################################################
 # Makefile for building: ADC
-# Generated by qmake (2.01a) (Qt 4.6.2) on: Wed Apr 7 21:11:41 2010
+# Generated by qmake (2.01a) (Qt 4.6.2) on: Fri Apr 9 10:33:37 2010
 # Project:  ADC1.pro
 # Template: app
 # Command: /home/juan64bits/ebd/ECB/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/qt-everywhere-opensource-src-4.6.2/bin/qmake -spec ../../../../openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/qt-everywhere-opensource-src-4.6.2/mkspecs/qws/linux-openwrt-g++ -unix -o Makefile ADC1.pro
diff --git a/Examples/ADC/QT_src/jz47xx_gpio.cpp b/Examples/ADC/Scope-QT-src/jz47xx_gpio.cpp
similarity index 100%
rename from Examples/ADC/QT_src/jz47xx_gpio.cpp
rename to Examples/ADC/Scope-QT-src/jz47xx_gpio.cpp
diff --git a/Examples/ADC/QT_src/jz47xx_gpio.h b/Examples/ADC/Scope-QT-src/jz47xx_gpio.h
similarity index 100%
rename from Examples/ADC/QT_src/jz47xx_gpio.h
rename to Examples/ADC/Scope-QT-src/jz47xx_gpio.h
diff --git a/Examples/ADC/QT_src/jz47xx_mmap.cpp b/Examples/ADC/Scope-QT-src/jz47xx_mmap.cpp
similarity index 100%
rename from Examples/ADC/QT_src/jz47xx_mmap.cpp
rename to Examples/ADC/Scope-QT-src/jz47xx_mmap.cpp
diff --git a/Examples/ADC/QT_src/jz47xx_mmap.h b/Examples/ADC/Scope-QT-src/jz47xx_mmap.h
similarity index 100%
rename from Examples/ADC/QT_src/jz47xx_mmap.h
rename to Examples/ADC/Scope-QT-src/jz47xx_mmap.h
diff --git a/Examples/ADC/QT_src/jz_adc_peripheral.cpp b/Examples/ADC/Scope-QT-src/jz_adc_peripheral.cpp
similarity index 87%
rename from Examples/ADC/QT_src/jz_adc_peripheral.cpp
rename to Examples/ADC/Scope-QT-src/jz_adc_peripheral.cpp
index 9390a3a..091f350 100644
--- a/Examples/ADC/QT_src/jz_adc_peripheral.cpp
+++ b/Examples/ADC/Scope-QT-src/jz_adc_peripheral.cpp
@@ -45,15 +45,3 @@ jz_adc_init()
 
 	return virt_addr;
 }
-
-void
-jz_adc_config(JZ_REG * addr, int BUFFER, uchar CLK_DIV, uchar CMD)
-{
-	addr[0] = (BUFFER << 16) + (CLK_DIV<<8) + CMD;
-}
-
-int
-jz_adc_check_buffer(JZ_REG * addr)
-{
-	return addr[0]&0x00000010;
-}
diff --git a/Examples/ADC/QT_src/jz_adc_peripheral.h b/Examples/ADC/Scope-QT-src/jz_adc_peripheral.h
similarity index 91%
rename from Examples/ADC/QT_src/jz_adc_peripheral.h
rename to Examples/ADC/Scope-QT-src/jz_adc_peripheral.h
index d92bff4..9617df2 100644
--- a/Examples/ADC/QT_src/jz_adc_peripheral.h
+++ b/Examples/ADC/Scope-QT-src/jz_adc_peripheral.h
@@ -24,7 +24,7 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 #include "jz47xx_gpio.h"
 
 #define ADC_CMD_NONE             0x00 /* Nothing to do                        */
-#define ADC_CMD_SET_SPI_CLKDIV   0x90 /* Set clock divider for ADC sclk       */
+#define ADC_CMD_SET_SPI_CLKDIV   0x00 /* Set clock divider for ADC sclk       */
 
 #define ADC_CMD_SET_CHANNEL0     0x30 /* Set channel 0                        */
 #define ADC_CMD_READ_CHANNEL0    0x20 /* Read channel 0                       */
@@ -54,7 +54,7 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 
 #define ADC_CMD_SET_FAST_CONV    0X39 /* Initialize ADC Fast Convertion(<10us)*/
 
-#define ADC_CMD_SET_LOW_CONV     0X3A /* Initialize ADC Fast Convertion(<40us)*/
+#define ADC_CMD_SET_LOW_CONV     0X3A /* Initialize ADC Slow Convertion(<40us)*/
 
 #define ADC_CMD_SET_AUTOSELFT_1  0x3B /* Set Autoselft ADC {(Vref+)-(Vref-)}/2*/
 #define ADC_CMD_READ_AUTOSELFT_1 0x2B /* Read Autoselft ADC 1 (0x0200)        */
@@ -68,7 +68,7 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 #define ADC_SPI_CLKDIV_MIN       0x08 /* 50/(2*9) -> 2.78MHz (MAX=2.8MHz)     */
 #define ADC_SPI_CLKDIV_MAX       0xFF /* 50/(2*256) -> 97.65KHz               */
 
-#define ADC_MAX_BUFFER           0x3FE/* 1022 reads/commands                  */
+#define ADC_MAX_BUFFER           0x3F0/* 1008 reads/commands                  */
 
 #define CS2_PORT				 JZ_GPIO_PORT_B
 #define CS2_PIN					 26
@@ -77,8 +77,4 @@ typedef unsigned char uchar;
 
 JZ_REG *jz_adc_init();
 
-void jz_adc_config(JZ_REG * addr, int BUFFER, uchar CLK_DIV, uchar CMD);
-
-int jz_adc_check_buffer(JZ_REG * addr);
-
 #endif
diff --git a/Examples/ADC/QT_src/main.cpp b/Examples/ADC/Scope-QT-src/main.cpp
similarity index 100%
rename from Examples/ADC/QT_src/main.cpp
rename to Examples/ADC/Scope-QT-src/main.cpp
diff --git a/Examples/ADC/Scope-QT-src/mainwindow.cpp b/Examples/ADC/Scope-QT-src/mainwindow.cpp
new file mode 100755
index 0000000..0c6da83
--- /dev/null
+++ b/Examples/ADC/Scope-QT-src/mainwindow.cpp
@@ -0,0 +1,63 @@
+#include "mainwindow.h"
+#include "ui_mainwindow.h"
+#include <QDebug>
+
+#include <QTime>
+#include <math.h>
+
+MainWindow::MainWindow(QWidget *parent)
+    : QMainWindow(parent), ui(new Ui::MainWindow)
+{
+    ui->setupUi(this);
+	connect(this,SIGNAL(refresh()),ui->Graph, SLOT(repaint()));
+	ui->Graph->setPointsPerPlot(120);
+	ui->Graph->setVoltsPerDiv(205);
+
+	timer1 =  new QTimer(this);
+	timer1->start(50);
+	connect(timer1, SIGNAL(timeout()), this, SLOT(updateGraph()));
+
+	CHANNEL = 1;
+	ADC1 = new ADCw;
+	ADC1->testADC();
+	ADC1->setBufferLen(120);
+	ADC1->setClockDiv(ADC_SPI_CLKDIV_MAX); //Maximun speed
+	printf("\nTaking 300 samples each 50ms from Channel 0,1 at Fs=99KHz \n");
+}
+
+MainWindow::~MainWindow()
+{
+    delete ui;
+}
+
+void MainWindow::updateGraph()
+{
+	JZ_REG * dataADC;
+
+	int tempD;
+
+		//CHANNEL 0
+		dataADC=ADC1->takeSamplesADC(0);
+		for(int i=0; i< 120/2; i++)
+		{
+			//printf("[%08X]",dataADC[i]);
+			tempD = dataADC[i]&0xFFFF;
+			ui->Graph->addPoint1(tempD+0x3ff);
+			tempD = dataADC[i]>>16;
+			ui->Graph->addPoint1(tempD+0x3ff);
+		}
+		CHANNEL = 1;
+
+		//CHANNEL 1
+		dataADC=ADC1->takeSamplesADC(1);
+		for(int i=0; i< 120/2; i++)
+		{
+			//printf("[%08X]",dataADC[i]);
+			tempD = dataADC[i]&0xFFFF;
+			ui->Graph->addPoint2(tempD);
+			tempD = dataADC[i]>>16;
+			ui->Graph->addPoint2(tempD);
+		}
+
+	emit refresh();
+}
diff --git a/Examples/ADC/QT_src/mainwindow.h b/Examples/ADC/Scope-QT-src/mainwindow.h
similarity index 96%
rename from Examples/ADC/QT_src/mainwindow.h
rename to Examples/ADC/Scope-QT-src/mainwindow.h
index f87f85c..f06f4ba 100755
--- a/Examples/ADC/QT_src/mainwindow.h
+++ b/Examples/ADC/Scope-QT-src/mainwindow.h
@@ -27,6 +27,7 @@ private:
     Ui::MainWindow *ui;
 	QTimer *timer1;
 	ADCw *ADC1;
+	bool CHANNEL;
 };
 
 #endif // MAINWINDOW_H
diff --git a/Examples/ADC/QT_src/mainwindow.ui b/Examples/ADC/Scope-QT-src/mainwindow.ui
similarity index 100%
rename from Examples/ADC/QT_src/mainwindow.ui
rename to Examples/ADC/Scope-QT-src/mainwindow.ui
diff --git a/Examples/ADC/QT_src/signaldisplay.cpp b/Examples/ADC/Scope-QT-src/signaldisplay.cpp
similarity index 51%
rename from Examples/ADC/QT_src/signaldisplay.cpp
rename to Examples/ADC/Scope-QT-src/signaldisplay.cpp
index d50868f..8bcd53f 100755
--- a/Examples/ADC/QT_src/signaldisplay.cpp
+++ b/Examples/ADC/Scope-QT-src/signaldisplay.cpp
@@ -4,7 +4,8 @@
 
 SignalDisplay::SignalDisplay(QWidget *&parent):QWidget(parent)
 {
-	colorTrace = Qt::black;
+	colorTrace1 = Qt::blue;
+	colorTrace2 = Qt::red;
     secsPerDiv = 1.0/600.0;
 	voltsPerDiv = 20;
 	setPointsPerPlot(10);
@@ -13,8 +14,9 @@ SignalDisplay::SignalDisplay(QWidget *&parent):QWidget(parent)
 void SignalDisplay::setPointsPerPlot(int value)
 {
 	pointsPerPlot = value;
-	waves = new QPoint[pointsPerPlot];
-	secsIdx =  0;
+	wave1 = new QPoint[pointsPerPlot];
+	wave2 = new QPoint[pointsPerPlot];
+	secsIdx1 =  0; secsIdx2 =  0;
 }
 
 void SignalDisplay::drawGrid(QPainter &p, QColor colorGrid, int x, int y, int w, int h, int nx, int ny){
@@ -35,26 +37,25 @@ void SignalDisplay::paintEvent(QPaintEvent *event){
 	ox = w;
 	oy = h;
 	painter.fillRect(0,0,w,h,Qt::white);
-	//painter.setPen(Qt::white);
-	//painter.drawLine(secsIdx*w/10/60.0/pointsPerPlot/secsPerDiv,0, \
-	//				 secsIdx*w/10/60.0/pointsPerPlot/secsPerDiv,h);
 	drawGrid(painter, Qt::lightGray,0,0,w,h,5, 10);
-
-	/*for(int i = 0; i < 	pointsPerPlot; i++)
-	{
-		painter.fillRect(waves[i].x()-w/pointsPerPlot/2,waves[i].y(), \
-							   w/pointsPerPlot,h-waves[i].y(), Qt::blue);
-	}*/
-	painter.setPen(colorTrace);
-	painter.drawPolyline(waves,pointsPerPlot);
-
+	painter.setPen(colorTrace1);
+	painter.drawPolyline(wave1,pointsPerPlot);
+	painter.setPen(colorTrace2);
+	painter.drawPolyline(wave2,pointsPerPlot);
 }
 
-void SignalDisplay::addPoint( int value1)
+void SignalDisplay::addPoint1( int value)
 {
-	waves[secsIdx] = 	QPoint(secsIdx*w/10/60.0/pointsPerPlot/secsPerDiv+w/(2*pointsPerPlot), \
-						oy-value1*h/voltsPerDiv/10);
-	secsIdx = (secsIdx+1) % pointsPerPlot;
+	wave1[secsIdx1] = 	QPoint(secsIdx1*w/10/60.0/pointsPerPlot/secsPerDiv+w/(2*pointsPerPlot), \
+						oy-value*h/voltsPerDiv/10);
+	secsIdx1 = (secsIdx1+1) % pointsPerPlot;
+}
+
+void SignalDisplay::addPoint2( int value)
+{
+	wave2[secsIdx2] = 	QPoint(secsIdx2*w/10/60.0/pointsPerPlot/secsPerDiv+w/(2*pointsPerPlot), \
+						oy-value*h/voltsPerDiv/10);
+	secsIdx2 = (secsIdx2+1) % pointsPerPlot;
 }
 
 //EOF
diff --git a/Examples/ADC/QT_src/signaldisplay.h b/Examples/ADC/Scope-QT-src/signaldisplay.h
similarity index 71%
rename from Examples/ADC/QT_src/signaldisplay.h
rename to Examples/ADC/Scope-QT-src/signaldisplay.h
index 8229c1c..4b87a86 100755
--- a/Examples/ADC/QT_src/signaldisplay.h
+++ b/Examples/ADC/Scope-QT-src/signaldisplay.h
@@ -9,21 +9,23 @@ class SignalDisplay : public QWidget
 {
 public:
 	SignalDisplay(QWidget *&parent);
-	void addPoint( int value1);
+	void addPoint1( int value);
+	void addPoint2( int value);
 	void setSecsPerDiv( float value ){ secsPerDiv = fabs(value);}
 	void setVoltsPerDiv( float value ){ voltsPerDiv = fabs(value);}
 	float getSecsPerDiv(){ return secsPerDiv; }
 	void  setPointsPerPlot(int value);
-	void setColorTrace(QColor color){colorTrace=color;};
+	void setColorTrace1(QColor color){colorTrace1=color;}
+	void setColorTrace2(QColor color){colorTrace2=color;}
 
 private:
 	void paintEvent(QPaintEvent *event);
 	void drawGrid(QPainter &p, QColor colorGrid, int x, int y, int w, int h, int nx, int ny);
-	QPoint *waves;
+	QPoint *wave1, *wave2;
 	float voltsPerDiv;
 	float secsPerDiv;
-	QColor colorTrace;
-	int secsIdx;
+	QColor colorTrace1,colorTrace2;
+	int secsIdx1, secsIdx2;
 	int w, h, ox, oy;
 	int pointsPerPlot;
 };
diff --git a/Examples/ADC/logic/ADC.bit b/Examples/ADC/logic/ADC.bit
new file mode 100644
index 0000000..b984bf9
Binary files /dev/null and b/Examples/ADC/logic/ADC.bit differ
diff --git a/Examples/ADC/logic/ADC.v b/Examples/ADC/logic/ADC.v
index 2956edb..0871f7f 100644
--- a/Examples/ADC/logic/ADC.v
+++ b/Examples/ADC/logic/ADC.v
@@ -77,14 +77,14 @@ module ADC(clk, sram_data, addr, nwe, ncs, noe, reset, led, ADC_EOC,
     wire     [7:0]   rdBus0, rdBus1, rdBus2, rdBus3;
       
     assign csN = buffer_addr[12]? (buffer_addr[11]? 4'b1000: 
-                                                   4'b0100)
+                                                    4'b0100)
                                 : (buffer_addr[11]? 4'b0010: 
-                                                   4'b0001);
+                                                    4'b0001);
 
     assign rdBus = buffer_addr[12]? (buffer_addr[11]? rdBus3: 
-                                                     rdBus2)
+                                                      rdBus2)
                                   : (buffer_addr[11]? rdBus1: 
-                                                     rdBus0);
+                                                      rdBus0);
 					      
     // Peripheral instantiation
     ADC_peripheral  P1( 
diff --git a/Examples/ADC/logic/ADC_peripheral.v b/Examples/ADC/logic/ADC_peripheral.v
index b28dd13..185ae3a 100644
--- a/Examples/ADC/logic/ADC_peripheral.v
+++ b/Examples/ADC/logic/ADC_peripheral.v
@@ -47,12 +47,12 @@ module ADC_peripheral(  clk, reset, cs, ADC_EOC, ADC_CS, ADC_CSTART,
             .DOB(),               // Port B 8-bit Data Output
             .DOPA(),              // Port A 1-bit Parity Output
             .DOPB(),              // Port B 1-bit Parity Output
-            .ADDRA(addr),         // Port A 11-bit Address Input
-            .ADDRB(addr2),        // Port B 11-bit Address Input
+            .ADDRA(addr[10:0]),   // Port A 11-bit Address Input
+            .ADDRB(addr2[10:0]),  // Port B 11-bit Address Input
             .CLKA(~clk),          // Port A Clock
             .CLKB(~clk),          // Port B Clock
-            .DIA(wrBus),          // Port A 8-bit Data Input
-            .DIB(wrBus2),         // Port B 8-bit Data Input
+            .DIA(wrBus[7:0]),     // Port A 8-bit Data Input
+            .DIB(wrBus2[7:0]),    // Port B 8-bit Data Input
             .DIPA(1'b0),          // Port A 1-bit parity Input
             .DIPB(1'b0),          // Port-B 1-bit parity Input
             .ENA(1'b1),           // Port A RAM Enable Input
@@ -141,7 +141,7 @@ module ADC_peripheral(  clk, reset, cs, ADC_EOC, ADC_CS, ADC_CSTART,
     /**************************************************************************/
 
     // REGISTER BANK:   Write control
-    always @(posedge clk)
+    always @(negedge clk)
         if(reset) 
             {CMD_START, CMD_TYP,CMD_ADC,SIZEB,we1} <= 0;
         else if(we & cs) begin
@@ -175,21 +175,21 @@ module ADC_peripheral(  clk, reset, cs, ADC_EOC, ADC_CS, ADC_CSTART,
  
     // CONTROL
     always @(posedge clk)
-        if(reset) 
+        if(reset) begin
             {w_st0, SPI_wr} <= 0;
+            ADC_CS <=1;
+        end
         else begin
             case (w_st0)
                  0: begin 
-                        rstStart <= 0; loadB <= 0; ADC_CS <=0; initB<=0;
+                        rstStart <= 0; loadB <= 0; initB<=0;
                         if(CMD_START) begin
-                            initB<=1;
+                            ADC_CS <=0; 
+                            SPI_wr <= 1;                            
                             w_st0 <=1;    
                         end
-                    end
+                    end                       
                  1: begin
-                        SPI_wr <= 1; w_st0 <=2;
-                    end                         
-                 2: begin
                         SPI_wr <= 0;
                         if(!busy && ADC_EOC) begin 
                             ADC_CS <=1;
@@ -198,12 +198,12 @@ module ADC_peripheral(  clk, reset, cs, ADC_EOC, ADC_CS, ADC_CSTART,
                                 w_st0<= 0; 
                             end
                             else begin 
-                                loadB <= 1;                               
-                                w_st0<= 0; 
+                                initB<=1;
+                                w_st0<= 2; 
                             end                     
                         end
                     end 
-                                         
+                 2: begin loadB <= 1; w_st0<= 0; end                  
             endcase            
         end
  
diff --git a/Examples/ADC/logic/Makefile b/Examples/ADC/logic/Makefile
index af4144b..6c1d966 100644
--- a/Examples/ADC/logic/Makefile
+++ b/Examples/ADC/logic/Makefile
@@ -18,7 +18,6 @@ remake:         clean-build all
 
 clean:
 	rm -f *~ */*~ a.out *.log *.key *.edf *.ps trace.dat
-	rm *.bit
 
 clean-build: clean
 	rm -rf build
diff --git a/Examples/ADC/src/Makefile b/Examples/ADC/src/Makefile
deleted file mode 100644
index a4ad1eb..0000000
--- a/Examples/ADC/src/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-CC  = mipsel-openwrt-linux-gcc
-
-all: upload
-
-DEBUG = -O3 -g0
-
-COMMON_SOURCES =  jz47xx_gpio.c jz47xx_mmap.c jz_adc_peripheral.c
-
-H_SOURCES = jz47xx_gpio.h jz47xx_mmap.h jz_adc_peripheral.h
-
-INCLUDE = -I.
-
-WARNINGS= -Wcast-align -Wpacked -Wpadded -Wall
-
-CCFLAGS = ${INCLUDE} ${DEBUG} ${WARNINGS} 
-
-LDFLAGS =
-
-COMMON_OBJECTS = $(COMMON_SOURCES:.c=.o)
-
-NANO_IP = 192.168.254.101
-
-jz_test_adc: $(COMMON_OBJECTS)
-	$(CC)  $(LDFLAGS) $(COMMON_OBJECTS) jz_test_adc.c -o jz_test_adc
-
-.c.o:
-	$(CC) -c $(CCFLAGS) $< -o $@
-
-upload: jz_test_adc
-	scp jz_test_adc root@$(NANO_IP):/root/
-
-clean: 
-	rm -f *.o jz_test_adc ${EXEC} *~
-
-indent:
-	indent -bad -bap -nbc -bl -nce -i2 --no-tabs --line-length120 $(COMMON_SOURCES) $(H_SOURCES)
diff --git a/Examples/ADC/src/jz47xx_gpio.c b/Examples/ADC/src/jz47xx_gpio.c
deleted file mode 100644
index affa85e..0000000
--- a/Examples/ADC/src/jz47xx_gpio.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-  JZ47xx GPIO at userspace
-
-  Copyright (C) 2010      Andres Calderon andres.calderon@emqbit.com
-                                 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <jz47xx_gpio.h>
-#include <jz47xx_mmap.h>
-
-
-#define JZ_GPIO_BASE 0x10010000
-
-void
-jz_gpio_as_output (JZ_PIO * pio, unsigned int o)
-{
-  pio->PXFUNC = (1 << (o));
-  pio->PXSELC = (1 << (o));
-  pio->PXDIRS = (1 << (o));
-}
-
-void
-jz_gpio_as_input (JZ_PIO * pio, unsigned int o)
-{
-  pio->PXFUNC = (1 << (o));
-  pio->PXSELC = (1 << (o));
-  pio->PXDIRC = (1 << (o));
-}
-
-void
-jz_gpio_set_pin (JZ_PIO * pio, unsigned int o)
-{
-  pio->PXDATS = (1 << (o));
-}
-
-void
-jz_gpio_clear_pin (JZ_PIO * pio, unsigned int o)
-{
-  pio->PXDATC = (1 << (o));
-}
-
-void
-jz_gpio_out (JZ_PIO * pio, unsigned int o, unsigned int val)
-{
-  if (val == 0)
-    pio->PXDATC = (1 << (o));
-  else
-    pio->PXDATS = (1 << (o));
-}
-
-unsigned int
-jz_gpio_get_pin (JZ_PIO * pio, unsigned int o)
-{
-  return (pio->PXPIN & (1 << o)) ? 1 : 0;
-}
-
-int
-jz_gpio_as_func (JZ_PIO * pio, unsigned int o, int func)
-{
-  switch (func)
-    {
-    case 0:
-      pio->PXFUNS = (1 << o);
-      pio->PXTRGC = (1 << o);
-      pio->PXSELC = (1 << o);
-      return 1;
-
-    case 1:
-      pio->PXFUNS = (1 << o);
-      pio->PXTRGC = (1 << o);
-      pio->PXSELS = (1 << o);
-      return 1;
-
-    case 2:
-      pio->PXFUNS = (1 << o);
-      pio->PXTRGS = (1 << o);
-      pio->PXSELC = (1 << o);
-      return 1;
-    }
-  return 0;
-}
-
-JZ_PIO *
-jz_gpio_map (int port)
-{
-  JZ_PIO *pio;
-
-  pio = (JZ_PIO *) jz_mmap (JZ_GPIO_BASE);
-  pio = (JZ_PIO *) ((unsigned int) pio + port * 0x100);
-
-  return pio;
-}
diff --git a/Examples/ADC/src/jz47xx_gpio.h b/Examples/ADC/src/jz47xx_gpio.h
deleted file mode 100644
index d8b0113..0000000
--- a/Examples/ADC/src/jz47xx_gpio.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-  JZ47xx GPIO at userspace
-
-  Copyright (C) 2010      Andres Calderon andres.calderon@emqbit.com
-                                 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-
-#ifndef __jz47xx_gpio_h__
-#define __jz47xx_gpio_h__
-
-#define	JZ_GPIO_PORT_A 0
-#define	JZ_GPIO_PORT_B 1
-#define	JZ_GPIO_PORT_C 2
-#define	JZ_GPIO_PORT_D 3
-
-typedef volatile unsigned int JZ_REG;   /* Hardware register definition */
-
-typedef struct _JZ_PIO
-{
-  JZ_REG PXPIN;                 /* PIN Level Register */
-  JZ_REG Reserved0;
-  JZ_REG Reserved1;
-  JZ_REG Reserved2;
-  JZ_REG PXDAT;                 /* Port Data Register */
-  JZ_REG PXDATS;                /* Port Data Set Register */
-  JZ_REG PXDATC;                /* Port Data Clear Register */
-  JZ_REG Reserved3;
-  JZ_REG PXIM;                  /* Interrupt Mask Register */
-  JZ_REG PXIMS;                 /* Interrupt Mask Set Reg */
-  JZ_REG PXIMC;                 /* Interrupt Mask Clear Reg */
-  JZ_REG Reserved4;
-  JZ_REG PXPE;                  /* Pull Enable Register */
-  JZ_REG PXPES;                 /* Pull Enable Set Reg. */
-  JZ_REG PXPEC;                 /* Pull Enable Clear Reg. */
-  JZ_REG Reserved5;
-  JZ_REG PXFUN;                 /* Function Register */
-  JZ_REG PXFUNS;                /* Function Set Register */
-  JZ_REG PXFUNC;                /* Function Clear Register */
-  JZ_REG Reserved6;
-  JZ_REG PXSEL;                 /* Select Register */
-  JZ_REG PXSELS;                /* Select Set Register */
-  JZ_REG PXSELC;                /* Select Clear Register */
-  JZ_REG Reserved7;
-  JZ_REG PXDIR;                 /* Direction Register */
-  JZ_REG PXDIRS;                /* Direction Set Register */
-  JZ_REG PXDIRC;                /* Direction Clear Register */
-  JZ_REG Reserved8;
-  JZ_REG PXTRG;                 /* Trigger Register */
-  JZ_REG PXTRGS;                /* Trigger Set Register */
-  JZ_REG PXTRGC;                /* Trigger Set Register */
-  JZ_REG Reserved9;
-  JZ_REG PXFLG;                 /* Port Flag Register */
-  JZ_REG PXFLGC;                /* Port Flag clear Register */
-} JZ_PIO, *PJZ_PIO;
-
-void jz_gpio_as_output (JZ_PIO * pio, unsigned int o);
-
-void jz_gpio_as_input (JZ_PIO * pio, unsigned int o);
-
-void jz_gpio_set_pin (JZ_PIO * pio, unsigned int o);
-
-void jz_gpio_clear_pin (JZ_PIO * pio, unsigned int o);
-
-void jz_gpio_out (JZ_PIO * pio, unsigned int o, unsigned int val);
-
-unsigned int jz_gpio_get_pin (JZ_PIO * pio, unsigned int o);
-
-int jz_gpio_as_func (JZ_PIO * pio, unsigned int o, int func);
-
-JZ_PIO *jz_gpio_map (int port);
-
-#endif
diff --git a/Examples/ADC/src/jz47xx_mmap.c b/Examples/ADC/src/jz47xx_mmap.c
deleted file mode 100644
index e8cf317..0000000
--- a/Examples/ADC/src/jz47xx_mmap.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * JZ47xx GPIO lines
- *
- * Written 2010 by Andres Calderon andres.calderon@emqbit.com
- */
-
-#include <stdio.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include <jz47xx_mmap.h>
-
-
-void *
-jz_mmap (off_t address)
-{
-  int fd;
-
-  void *pio;
-
-  if ((fd = open ("/dev/mem", O_RDWR | O_SYNC)) == -1)
-    {
-      fprintf (stderr, "Cannot open /dev/mem.\n");
-      return 0;
-    }
-
-  pio = (void *) mmap (0, getpagesize (), PROT_READ | PROT_WRITE, MAP_SHARED, fd, address);
-
-  if (pio == (void *) -1)
-    {
-      fprintf (stderr, "Cannot mmap.\n");
-      return 0;
-    }
-
-  return pio;
-}
diff --git a/Examples/ADC/src/jz47xx_mmap.h b/Examples/ADC/src/jz47xx_mmap.h
deleted file mode 100644
index 492825b..0000000
--- a/Examples/ADC/src/jz47xx_mmap.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * JZ47xx GPIO lines
- *
- * Written 2010 by Andres Calderon andres.calderon@emqbit.com
- */
-
-#ifndef __jz47xx_mmap_h__
-#define __jz47xx_mmap_h__
-
-#include <sys/mman.h>
-
-void *jz_mmap (off_t address);
-
-#endif
diff --git a/Examples/ADC/src/jz_adc_peripheral.c b/Examples/ADC/src/jz_adc_peripheral.c
deleted file mode 100644
index e5f9cd1..0000000
--- a/Examples/ADC/src/jz_adc_peripheral.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* ADC Peripheral.c
-
-Copyright (C) 2010             Carlos Camargo  cicamargoba@unal.edu.co
-                               Andres Calderon andres.calderon@emqbit.com
-                               
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-
-#include <stdio.h>
-#include <unistd.h>
-
-#include "jz_adc_peripheral.h"
-
-void
-jz_adc_config(JZ_REG * addr, uchar BUFFER, uchar CLK_DIV, uchar CMD)
-{
-    addr[0] = (BUFFER << 16) + (CLK_DIV<<8) + CMD;
-}
-
-int
-jz_adc_check_buffer(JZ_REG * addr)
-{
-    return addr[0]&0x00FF0000;
-}
-
diff --git a/Examples/ADC/src/jz_adc_peripheral.h b/Examples/ADC/src/jz_adc_peripheral.h
deleted file mode 100644
index de55827..0000000
--- a/Examples/ADC/src/jz_adc_peripheral.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* ADC Peripheral.h
-
-Copyright (C) 2010             Carlos Camargo  cicamargoba@unal.edu.co
-                               Andres Calderon andres.calderon@emqbit.com
-                               
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-
-#ifndef __adc_peropheral_h__
-#define __adc_peropheral_h__
-
-#include "jz47xx_gpio.h"
-
-#define ADC_CMD_NONE             0x00 /* Nothing to do                        */
-#define ADC_CMD_SET_SPI_CLKDIV   0x90 /* Set clock divider for ADC sclk       */
-
-#define ADC_CMD_SET_CHANNEL0     0x50 /* Set channel 0                        */
-#define ADC_CMD_READ_CHANNEL0    0x60 /* Read channel 0                       */
-
-#define ADC_CMD_SET_CHANNEL1     0x51 /* Set channel 1                        */
-#define ADC_CMD_READ_CHANNEL1    0x61 /* Read channel 1                       */
-
-#define ADC_CMD_SET_CHANNEL2     0x52 /* Set channel 2                        */
-#define ADC_CMD_READ_CHANNEL2    0x62 /* Read channel 2                       */
-
-#define ADC_CMD_SET_CHANNEL3     0x53 /* Set channel 3                        */
-#define ADC_CMD_READ_CHANNEL3    0x63 /* Read channel 3                       */
-
-#define ADC_CMD_SET_CHANNEL4     0x54 /* Set channel 4                        */
-#define ADC_CMD_READ_CHANNEL4    0x64 /* Read channel 4                       */
-
-#define ADC_CMD_SET_CHANNEL5     0x55 /* Set channel 5                        */
-#define ADC_CMD_READ_CHANNEL5    0x65 /* Read channel 5                       */
-
-#define ADC_CMD_SET_CHANNEL6     0x56 /* Set channel 6                        */
-#define ADC_CMD_READ_CHANNEL6    0x66 /* Read channel 6                       */
-
-#define ADC_CMD_SET_CHANNEL7     0x57 /* Set channel 7                        */
-#define ADC_CMD_READ_CHANNEL7    0x67 /* Read channel 8                       */
-
-#define ADC_CMD_SET_POWER_DOWN   0X58 /* Set ADC power down mode  (1uA)       */
-
-#define ADC_CMD_SET_FAST_CONV    0X59 /* Initialize ADC Fast Convertion(<10us)*/
-
-#define ADC_CMD_SET_LOW_CONV     0X5A /* Initialize ADC Fast Convertion(<40us)*/
-
-#define ADC_CMD_SET_AUTOSELFT_1  0x5B /* Set Autoselft ADC {(Vref+)-(Vref-)}/2*/
-#define ADC_CMD_READ_AUTOSELFT_1 0x6B /* Read Autoselft ADC 1 (0x0200)        */
-
-#define ADC_CMD_SET_AUTOSELFT_2  0x5C /* Set Autoselft ADC (Vref-)            */
-#define ADC_CMD_READ_AUTOSELFT_2 0x6C /* Read Autoselft ADC 2 (0x0000)        */
-
-#define ADC_CMD_SET_AUTOSELFT_3  0x5D /* Set Autoselft ADC (Vref+)            */
-#define ADC_CMD_READ_AUTOSELFT_3 0x6D /* Read Autoselft ADC 3 (0x03FF)        */
-
-#define ADC_SPI_CLKDIV_MIN       0x09 /* 50/(2*9) -> 2.7MHz (MAX=2.8MHz)      */
-#define ADC_SPI_CLKDIV_MAX       0xFF /* 50/(2*255) -> 98.04KHz               */
-
-#define ADC_MAX_BUFFER           0xFE /* 254 reads/commands                   */
- 
-typedef unsigned char uchar;   
-
-void jz_adc_config(JZ_REG * addr, uchar BUFFER, uchar CLK_DIV, uchar CMD);
-
-int jz_adc_check_buffer(JZ_REG * addr);
-
-#endif
diff --git a/Examples/ADC/src/jz_test_adc.c b/Examples/ADC/src/jz_test_adc.c
deleted file mode 100644
index eda939c..0000000
--- a/Examples/ADC/src/jz_test_adc.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* ADC TEST
-
-Copyright (C) 2010             Carlos Camargo  cicamargoba@unal.edu.co
-                               Andres Calderon andres.calderon@emqbit.com
-                               
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-
-#include <stdio.h>
-#include <unistd.h>
-
-#include "jz47xx_gpio.h"
-#include "jz47xx_mmap.h"
-#include "jz_adc_peripheral.h"
-
-#define TEST_PORT JZ_GPIO_PORT_B
-#define TEST_PIN  26
-
-int
-main ()
-{
-	int i,j;
-	JZ_PIO *pio;
-	JZ_REG *virt_addr;
-
-	pio = jz_gpio_map (TEST_PORT);
-	jz_gpio_as_func (pio, TEST_PIN, 0);
-
-	virt_addr = (JZ_REG *) (jz_mmap (0x13010000) + 0x18);
-
-	if (*virt_addr != 0x0FFF7700)
-	{                           
-	  	*virt_addr = 0x0FFF7700;
-	  	printf ("Configuring CS2 32 bits and 0 WS: %08X\n", *virt_addr);
-	}
-	else
-		printf ("CS2, already configured: %08X\n", *virt_addr);
-
-	virt_addr = (JZ_REG *) jz_mmap (0x14000000);
-
-	/*************************Clean FPGA RAM memory****************************/
-	for (i = 0; i < 512; i++)     //RAMB16_s9_s9 has 2048 bytes 8-bit  
-	{								
-	  	virt_addr[i] = 0x00000000; //Clean 4 register by cicle
-	}
-
-	/****************Configure ADC register on FPGA RAM memory*****************/
-    uchar LENB = 0x01; // 1 read/cmd
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_SPI_CLKDIV);
-	usleep (100);
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_FAST_CONV);
-	usleep (100);
-	printf("\nADC in Fast Convertion Mode (10us) and Fs=9.8KHz (Min)\n");
-
-    LENB = ADC_MAX_BUFFER; // 254 read/cmd
-    
-	/******************************* TEST 1 ***********************************/
-	printf("\nINIT TEST1: Autoselft {(Vref+) - (Vref-)}/2 -> Return 0x0200 \n");
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_1);
-	usleep (100);
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_1);
-	printf("[%08X]", virt_addr[0]);
-	while(jz_adc_check_buffer(virt_addr))
-	{
-    	printf("[%08X]-", virt_addr[0]);
-    	fflush (stdout);
-	    usleep (10000);
-	}
-	for(i=1; i< LENB/2+1; i++)
-		printf("[%08X]", virt_addr[i]);
-
-	/******************************* TEST 2 ***********************************/
-	printf("\n\nINIT TEST2: Autoselft (Vref-) -> Return 0x0000 \n");
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_2);
-	usleep (100);
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_2);
-	while(jz_adc_check_buffer(virt_addr)){usleep (100);}
-	for(i=1; i< LENB/2+1; i++)
-		printf("[%08X]", virt_addr[i]);
-		
-	/******************************* TEST 3 ***********************************/
-	printf("\n\nINIT TEST3: Autoselft (Vref+) -> Return 0x03FF \n");
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_AUTOSELFT_3);
-	usleep (100);
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_READ_AUTOSELFT_3);
-	while(jz_adc_check_buffer(virt_addr)){usleep (100);}
-	for(i=1; i< LENB/2+1; i++)
-		printf("[%08X]", virt_addr[i]);		
-
-	printf("\n\nTESTS complete\n");
-
-	LENB = 0x01;	// 1 read/cmd
-	jz_adc_config(virt_addr, LENB, ADC_SPI_CLKDIV_MAX, ADC_CMD_SET_POWER_DOWN);
-	printf("\nADC in Power Down Mode \n");
-
-  return 0;
-}
-
-
diff --git a/docs/wiki/.~lock.ADC.odg# b/docs/wiki/.~lock.ADC.odg#
deleted file mode 100644
index 66c0037..0000000
--- a/docs/wiki/.~lock.ADC.odg#
+++ /dev/null
@@ -1 +0,0 @@
-Juan64Bits ,juan64bits,Maximus,07.04.2010 18:22,file:///home/juan64bits/.openoffice.org/3;
\ No newline at end of file
diff --git a/docs/wiki/ADC.odg b/docs/wiki/ADC.odg
index a0afee9..43f4f28 100644
Binary files a/docs/wiki/ADC.odg and b/docs/wiki/ADC.odg differ