diff --git a/nanonote-TLWR11U/data/conf/config.minimal b/nanonote-TLWR11U/data/conf/config.minimal
new file mode 100644
index 0000000..bf77d2b
--- /dev/null
+++ b/nanonote-TLWR11U/data/conf/config.minimal
@@ -0,0 +1,59 @@
+#
+# This file must be copied to .config in the OpenWrt root folder,
+# then run: yes "" | make oldconfig > /dev/null
+#
+
+CONFIG_TARGET_ar71xx=y
+CONFIG_TARGET_ar71xx_generic=y
+CONFIG_TARGET_ar71xx_generic_TLWR703=y
+
+CONFIG_TARGET_ROOTFS_TARGZ=y
+CONFIG_TARGET_ROOTFS_JFFS2=y
+CONFIG_TARGET_ROOTFS_SQUASHFS=y
+
+# CONFIG_BUILD_PATENTED is not set
+
+CONFIG_DEVEL=y
+CONFIG_TOOLCHAINOPTS=y
+CONFIG_GDB=y
+
+# CONFIG_SDK is not set
+
+# CONFIG_ALL is not set
+# Enable this option only you want build ALL PAKCAGE in feeds.conf
+# To skip broken module packages while compiling , run "make IGNORE_ERRORS=m"
+
+CONFIG_PACKAGE_block-mount=y
+
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-mod-rpc=y
+
+CONFIG_PACKAGE_kmod-fs-ext4=y
+CONFIG_PACKAGE_kmod-ipv6=m
+CONFIG_PACKAGE_kmod-tun=m
+
+CONFIG_PACKAGE_kmod-usb-core=y
+CONFIG_PACKAGE_kmod-usb-serial=m
+CONFIG_PACKAGE_kmod-usb-serial-ftdi=m
+CONFIG_PACKAGE_kmod-usb-serial-pl2303=m
+CONFIG_PACKAGE_kmod-usb-storage=y
+CONFIG_PACKAGE_kmod-usb2=y
+CONFIG_PACKAGE_kmod-video-core=m
+CONFIG_PACKAGE_kmod-video-uvc=m
+CONFIG_PACKAGE_kmod-video-videobuf2=m
+CONFIG_PACKAGE_kmod-at86rf230=m
+CONFIG_PACKAGE_kmod-ieee802154=m
+CONFIG_PACKAGE_kmod-mac802154=m
+CONFIG_PACKAGE_kmod-spi_atusb=m
+
+CONFIG_PACKAGE_ip=m
+CONFIG_PACKAGE_dirtpan=m
+CONFIG_PACKAGE_lowpan-tools=m
+CONFIG_PACKAGE_mjpg-streamer=m
+CONFIG_PACKAGE_swap-utils=y
+CONFIG_PACKAGE_mount-utils=m
+CONFIG_PACKAGE_strace=m
+CONFIG_PACKAGE_urjtag=m
+CONFIG_PACKAGE_xburst-tools=m
diff --git a/nanonote-TLWR11U/data/conf/feeds.conf b/nanonote-TLWR11U/data/conf/feeds.conf
new file mode 100644
index 0000000..a5361a1
--- /dev/null
+++ b/nanonote-TLWR11U/data/conf/feeds.conf
@@ -0,0 +1,10 @@
+src-git qipackages git://projects.qi-hardware.com/openwrt-packages.git
+src-svn packages svn://svn.openwrt.org/openwrt/packages
+src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
+
+src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
+src-svn luci http://svn.luci.subsignal.org/luci/trunk/contrib/package
+src-svn xorg svn://svn.openwrt.org/openwrt/feeds/xorg
+
+src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
+src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
diff --git a/nanonote-TLWR11U/files/etc/config/dhcp b/nanonote-TLWR11U/files/etc/config/dhcp
new file mode 100644
index 0000000..1efde32
--- /dev/null
+++ b/nanonote-TLWR11U/files/etc/config/dhcp
@@ -0,0 +1,27 @@
+
+config 'dnsmasq'
+	option 'domainneeded' '1'
+	option 'boguspriv' '1'
+	option 'filterwin2k' '0'
+	option 'localise_queries' '1'
+	option 'rebind_protection' '1'
+	option 'rebind_localhost' '1'
+	option 'local' '/lan/'
+	option 'domain' 'lan'
+	option 'expandhosts' '1'
+	option 'nonegcache' '0'
+	option 'authoritative' '1'
+	option 'readethers' '1'
+	option 'leasefile' '/tmp/dhcp.leases'
+	option 'resolvfile' '/tmp/resolv.conf.auto'
+
+config 'dhcp' 'lan'
+	option 'interface' 'lan'
+	option 'start' '100'
+	option 'leasetime' '12h'
+	option 'limit' '1'
+
+config 'dhcp' 'wan'
+	option 'interface' 'wan'
+	option 'ignore' '1'
+
diff --git a/nanonote-TLWR11U/files/etc/config/firewall b/nanonote-TLWR11U/files/etc/config/firewall
new file mode 100644
index 0000000..0e69f87
--- /dev/null
+++ b/nanonote-TLWR11U/files/etc/config/firewall
@@ -0,0 +1,148 @@
+
+config defaults
+	option syn_flood '1'
+	option input 'ACCEPT'
+	option output 'ACCEPT'
+	option forward 'REJECT'
+
+config zone
+	option name 'lan'
+	option input 'ACCEPT'
+	option output 'ACCEPT'
+	option forward 'REJECT'
+	option network 'lan USB'
+
+config zone
+	option name 'wan'
+	option input 'REJECT'
+	option output 'ACCEPT'
+	option forward 'REJECT'
+	option masq '1'
+	option mtu_fix '1'
+	option network 'wan wwan'
+
+config forwarding
+	option src 'lan'
+	option dest 'wan'
+
+config rule
+	option name 'Allow-DHCP-Renew'
+	option src 'wan'
+	option proto 'udp'
+	option dest_port '68'
+	option target 'ACCEPT'
+	option family 'ipv4'
+
+config rule
+	option name 'Allow-Ping'
+	option src 'wan'
+	option proto 'icmp'
+	option icmp_type 'echo-request'
+	option family 'ipv4'
+	option target 'ACCEPT'
+
+config rule
+	option name 'Allow-DHCPv6'
+	option src 'wan'
+	option proto 'udp'
+	option src_ip 'fe80::/10'
+	option src_port '547'
+	option dest_ip 'fe80::/10'
+	option dest_port '546'
+	option family 'ipv6'
+	option target 'ACCEPT'
+
+config rule
+	option name 'Allow-ICMPv6-Input'
+	option src 'wan'
+	option proto 'icmp'
+	list icmp_type 'echo-request'
+	list icmp_type 'destination-unreachable'
+	list icmp_type 'packet-too-big'
+	list icmp_type 'time-exceeded'
+	list icmp_type 'bad-header'
+	list icmp_type 'unknown-header-type'
+	list icmp_type 'router-solicitation'
+	list icmp_type 'neighbour-solicitation'
+	option limit '1000/sec'
+	option family 'ipv6'
+	option target 'ACCEPT'
+
+config rule
+	option name 'Allow-ICMPv6-Forward'
+	option src 'wan'
+	option dest '*'
+	option proto 'icmp'
+	list icmp_type 'echo-request'
+	list icmp_type 'destination-unreachable'
+	list icmp_type 'packet-too-big'
+	list icmp_type 'time-exceeded'
+	list icmp_type 'bad-header'
+	list icmp_type 'unknown-header-type'
+	option limit '1000/sec'
+	option family 'ipv6'
+	option target 'ACCEPT'
+
+config include
+	option path '/etc/firewall.user'
+
+config zone
+	option name 'newzone'
+	option input 'ACCEPT'
+	option forward 'REJECT'
+	option network ' '
+	option output 'ACCEPT'
+
+config rule
+	option target 'ACCEPT'
+	option src 'wan'
+	option dest_port '22'
+	option name 'ssh'
+	option family 'ipv4'
+	option proto 'tcp udp'
+
+config rule
+	option target 'ACCEPT'
+	option src 'wan'
+	option dest_port '80'
+	option name 'web'
+	option family 'ipv4'
+	option proto 'tcp udp'
+
+config redirect
+	option target 'DNAT'
+	option src 'wan'
+	option dest 'lan'
+	option proto 'tcp udp'
+	option src_dport '4444'
+	option dest_ip '192.168.42.100'
+	option dest_port '4444'
+	option name 'osc'
+
+config redirect
+	option target 'DNAT'
+	option src 'wan'
+	option dest 'lan'
+	option proto 'tcp'
+	option src_dport '21'
+	option dest_ip '192.168.42.100'
+	option dest_port '21'
+	option name 'ftp'
+
+config redirect
+	option target 'DNAT'
+	option src 'wan'
+	option dest 'lan'
+	option proto 'tcp udp'
+	option src_dport '23'
+	option dest_ip '192.168.42.100'
+	option dest_port '23'
+	option name 'telnet'
+
+config rule
+	option target 'ACCEPT'
+	option src 'wan'
+	option proto 'tcp udp'
+	option dest_port '8080'
+	option name 'mjpg'
+
diff --git a/nanonote-TLWR11U/files/etc/config/fstab b/nanonote-TLWR11U/files/etc/config/fstab
new file mode 100644
index 0000000..b2c8def
--- /dev/null
+++ b/nanonote-TLWR11U/files/etc/config/fstab
@@ -0,0 +1,19 @@
+config global automount
+	option from_fstab 1
+	option anon_mount 1
+	
+config global autoswap
+	option from_fstab 1
+	option anon_swap 0
+	
+config mount
+	option target	/overlay
+	option device	/dev/sda1
+	option fstype	ext4
+	option options	rw,sync
+	option enabled	1
+	option enabled_fsck 0
+
+config swap
+	option device	/dev/sda2
+	option enabled	1
diff --git a/nanonote-TLWR11U/files/etc/config/network b/nanonote-TLWR11U/files/etc/config/network
new file mode 100644
index 0000000..767bd37
--- /dev/null
+++ b/nanonote-TLWR11U/files/etc/config/network
@@ -0,0 +1,24 @@
+
+config interface 'loopback'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option ifname 'eth0'
+	option type 'bridge'
+	option proto 'static'
+	option netmask '255.255.255.0'
+	option ipaddr '192.168.42.1'
+
+config interface 'wwan'
+	option proto 'dhcp'
+
+config interface 'USB'
+	option type 'bridge'
+	option proto 'static'
+	option ifname 'usb0'
+	option ipaddr '192.168.254.100'
+	option netmask '255.255.255.0'
+
diff --git a/nanonote-TLWR11U/files/etc/config/uhttpd b/nanonote-TLWR11U/files/etc/config/uhttpd
new file mode 100644
index 0000000..08ca5e5
--- /dev/null
+++ b/nanonote-TLWR11U/files/etc/config/uhttpd
@@ -0,0 +1,84 @@
+# Server configuration
+config uhttpd main
+
+	# HTTP listen addresses, multiple allowed
+	list listen_http	0.0.0.0:80
+#	list listen_http	[::]:80
+
+	# HTTPS listen addresses, multiple allowed
+	list listen_https	0.0.0.0:443
+#	list listen_https	[::]:443
+
+	# Server document root
+	option home		/www
+
+	# Reject requests from RFC1918 IP addresses
+	# directed to the servers public IP(s).
+	# This is a DNS rebinding countermeasure.
+	option rfc1918_filter 1
+
+	# Certificate and private key for HTTPS.
+	# If no listen_https addresses are given,
+	# the key options are ignored.
+	option cert		/etc/uhttpd.crt
+	option key		/etc/uhttpd.key
+
+	# CGI url prefix, will be searched in docroot.
+	# Default is /cgi-bin
+	option cgi_prefix	/cgi-bin
+
+	# List of extension->interpreter mappings.
+	# Files with an associated interpreter can
+	# be called outside of the CGI prefix and do
+	# not need to be executable.
+#	list interpreter	".php=/usr/bin/php-cgi"
+#	list interpreter	".cgi=/usr/bin/perl"
+
+	# Lua url prefix and handler script.
+	# Lua support is disabled if no prefix given.
+#	option lua_prefix	/luci
+#	option lua_handler	/usr/lib/lua/luci/sgi/uhttpd.lua
+
+	# CGI/Lua timeout, if the called script does not
+	# write data within the given amount of seconds,
+	# the server will terminate the request with
+	# 504 Gateway Timeout response.
+	option script_timeout	60
+
+	# Network timeout, if the current connection is
+	# blocked for the specified amount of seconds,
+	# the server will terminate the associated
+	# request process.
+	option network_timeout	30
+
+	# TCP Keep-Alive, send periodic keep-alive probes
+	# over established connections to detect dead peers.
+	# The value is given in seconds to specify the
+	# interval between subsequent probes.
+	# Setting this to 0 will disable TCP keep-alive.
+	option tcp_keepalive	1
+
+	# Basic auth realm, defaults to local hostname
+#	option realm	OpenWrt
+
+	# Configuration file in busybox httpd format
+#	option config	/etc/httpd.conf
+
+
+# Certificate defaults for px5g key generator
+config cert px5g
+
+	# Validity time
+	option days		730
+
+	# RSA key size
+	option bits		1024
+
+	# Location
+	option country		DE
+	option state		Berlin
+	option location		Berlin
+
+	# Common name
+	option commonname	OpenWrt
+
diff --git a/nanonote-TLWR11U/files/opt/m1-wireless.lua b/nanonote-TLWR11U/files/opt/m1-wireless.lua
new file mode 100755
index 0000000..e0b683b
--- /dev/null
+++ b/nanonote-TLWR11U/files/opt/m1-wireless.lua
@@ -0,0 +1,96 @@
+#!/usr/bin/env lua
+
+local io     = require "io"
+local os     = require "os"
+local table  = require "table"
+
+function trim (s)
+	return (string.gsub(s, "^%s*(.-)%s*$", "%1"))
+end
+
+function split(delim, text)
+	local list = {}
+	if string.len(text) <= 0 then
+	   return list
+	end
+	delim = delim or ""
+	local pos = 1
+	-- if delim matches empty string then it would give an endless loop
+	if string.find("", delim, 1) and delim ~= "" then 
+	   error("delim matches empty string!")
+	end
+	local first, last
+	while 1 do
+	   if delim ~= "" then 
+	      first, last = string.find(text, delim, pos)
+	   else
+	      first, last = string.find(text, "%s+", pos)
+	      if first == 1 then
+		 pos = last+1
+		 first, last = string.find(text, "%s+", pos)
+	      end
+	   end
+	   if first then -- found?
+	      table.insert(list, string.sub(text, pos, first-1))
+	      pos = last+1
+	   else
+	      table.insert(list, string.sub(text, pos))
+	      break
+	   end
+	end
+	return list
+end
+
+function exec(command)
+        local pp   = io.popen(command)
+        local data = pp:read("*a")
+	pp:close()
+
+        return data
+end
+
+function iwscan(iface)
+	local siface = iface or ""
+	local cnt = exec("iwlist "..siface.." scan 2>/dev/null")
+	local iws = {}
+
+	cnt = trim(cnt)
+	for i, l in pairs(split("\n          Cell", cnt)) do
+	   local ESSID = l:match("ESSID:\"(.-)\"")
+	   if ESSID then
+	      local Q = l:match("Quality[:=](.-)[ ]")
+	      local A = l:match("Authentication Suites.- : (.-)\n")
+	      local P = l:match("Pairwise Ciphers.- : (.-)\n")
+	      
+	      local enc
+	      if not l:find("Encryption key:on") then
+		 enc = "none"
+	      else
+		 local wpa = l:find("WPA Version 1")
+		 local rsn = l:find("WPA2 Version 1")
+		 if wpa and rsn then enc = "psk+psk2"
+		 elseif rsn then enc = "psk2"
+		 elseif wpa then enc = "psk"
+		 else enc = "wep" end
+	      end
+	      
+	      local a = Q:match("(%d-)/")
+	      local b = Q:match("/(%d-)$")
+	      Q = math.floor(tonumber(a)/tonumber(b)*100)
+
+	      local r = Q .. "%," .. ESSID .. "," .. enc
+
+	      table.insert(iws, r)
+	   end
+	end
+	
+	return iws
+end
+
+local t = iwscan("wlan0")
+if t == {} then
+    print();
+else
+    for k,v in pairs(t) do print(v) end
+end
+        
diff --git a/nanonote-TLWR11U/files/opt/m1-wireless.sh b/nanonote-TLWR11U/files/opt/m1-wireless.sh
new file mode 100755
index 0000000..76af51f
--- /dev/null
+++ b/nanonote-TLWR11U/files/opt/m1-wireless.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+if [ "$1" == "set" ] && [ "$#" == "4" ]; then
+  uci delete network.wwan
+  uci set network.wwan=interface
+  uci set network.wwan.proto=dhcp
+
+  uci delete wireless.@wifi-iface[0]
+  uci set wireless.@wifi-device[0].disabled=0
+  uci add wireless wifi-iface   > /dev/null 2>&1
+  uci set wireless.@wifi-iface[0].device='radio0'
+  uci set wireless.@wifi-iface[0].network='wwan'
+  uci set wireless.@wifi-iface[0].mode='sta'
+
+  #none for an open network, 
+  #wep for WEP, 
+  #psk for WPA-PSK, or 
+  #psk2
+
+  uci set wireless.@wifi-iface[0].ssid=$2
+  uci set wireless.@wifi-iface[0].key=$3
+  uci set wireless.@wifi-iface[0].encryption=$4
+
+  uci commit network
+  uci commit wireless
+  ifup wwan
+  sleep 2
+  
+  exit 0
+fi
+
+
+if [ "$1" == "get" ]; then
+  ifconfig -a | grep wlan0 > /dev/null 2>&1
+
+  if [ "$?" != "0" ]; then
+    iw phy phy0 interface add wlan0 type station
+    ifconfig wlan0 up
+    sleep 1
+  fi
+  
+  /opt/m1-wireless.lua
+
+  exit 0
+fi
+
+if [ "$1" == "status" ]; then
+  sleep 1
+  IP=`ifconfig wlan0 2>/dev/null | grep "inet addr" | \
+      sed -e 's/^ *//g' | cut -d":" -f2 | cut -d" " -f1` 
+  if [ "$?" != 0 ] || [ "${IP}" == "" ]; then
+    echo "Disconnected"
+    echo "0.0.0.0"
+    exit 1
+  fi
+  
+  ESSID=`iwconfig wlan0 2>/dev/null | grep ESSID | cut -d":" -f 2 | sed -e 's/\"//g'`
+  
+  echo "${ESSID}"
+  echo "${IP}"
+
+  exit 0
+fi
+
+echo "Usage: $0 [get/set/status] PARAMS..."
+exit 1