openwrt-xburst/target/linux/ar71xx/base-files/etc/defconfig/tew-632brp/network

config interface loopback
	option ifname	lo
	option proto	static
	option ipaddr	127.0.0.1
	option netmask	255.0.0.0

config interface lan
	option ifname	eth0
	option type	bridge
	option proto	static
	option ipaddr	192.168.1.1
	option netmask	255.255.255.0

config interface wan
	option ifname	eth1
	option proto	dhcp

config switch
        option name	eth0
        option reset	1
        option enable_vlan 1

config switch_vlan
        option device	eth0
        option vlan	1
        option ports	'0 1 2 3 4'
[ar71xx] tew-632brp: add default network configuration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14830 3c298f89-4303-0410-b956-a3cf2f4a3e73 2009-03-10 10:14:26 +02:00			`config interface loopback`
			`option ifname lo`
			`option proto static`
			`option ipaddr 127.0.0.1`
			`option netmask 255.0.0.0`

			`config interface lan`
			`option ifname eth0`
			`option type bridge`
			`option proto static`
			`option ipaddr 192.168.1.1`
			`option netmask 255.255.255.0`

			`config interface wan`
			`option ifname eth1`
			`option proto dhcp`
backfire: ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards (backport of r20752) git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@20761 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-04-09 15:06:12 +03:00
			`config switch`
			`option name eth0`
			`option reset 1`
			`option enable_vlan 1`

			`config switch_vlan`
			`option device eth0`
			`option vlan 1`
			`option ports '0 1 2 3 4'`