1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-09 15:49:42 +02:00
openwrt-xburst/package/madwifi/patches/450-calibration.patch

178 lines
6.0 KiB
Diff
Raw Normal View History

--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -394,7 +394,6 @@ static int rfkill = 0;
static int tpc = 1;
static int xchanmode = -1;
#include "ath_wprobe.c"
-static int beacon_cal = 1;
static const struct ath_hw_detect generic_hw_info = {
.vendor_name = "Unknown",
@@ -429,7 +428,6 @@ static struct notifier_block ath_event_b
};
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,52))
-MODULE_PARM(beacon_cal, "i");
MODULE_PARM(xchanmode, "i");
MODULE_PARM(rfkill, "i");
#ifdef ATH_CAP_TPC
@@ -440,7 +438,6 @@ MODULE_PARM(autocreate, "s");
MODULE_PARM(ratectl, "s");
#else
#include <linux/moduleparam.h>
-module_param(beacon_cal, int, 0600);
module_param(xchanmode, int, 0600);
module_param(rfkill, int, 0600);
#ifdef ATH_CAP_TPC
@@ -825,6 +822,7 @@ ath_attach(u_int16_t devid, struct net_d
error = EIO;
goto bad2;
}
+ sc->sc_cal_interval = ath_calinterval;
init_timer(&sc->sc_cal_ch);
sc->sc_cal_ch.function = ath_calibrate;
sc->sc_cal_ch.data = (unsigned long) dev;
@@ -2737,8 +2735,7 @@ ath_stop_locked(struct net_device *dev)
}
if (!sc->sc_invalid) {
del_timer_sync(&sc->sc_dfs_cac_timer);
- if (!sc->sc_beacon_cal)
- del_timer_sync(&sc->sc_cal_ch);
+ del_timer_sync(&sc->sc_cal_ch);
}
ath_draintxq(sc);
if (!sc->sc_invalid) {
@@ -2763,10 +2760,9 @@ static void ath_set_beacon_cal(struct at
if (val) {
del_timer_sync(&sc->sc_cal_ch);
} else {
- sc->sc_cal_ch.expires = jiffies + (ath_calinterval * HZ);
- add_timer(&sc->sc_cal_ch);
+ mod_timer(&sc->sc_cal_ch, jiffies + (sc->sc_cal_interval * HZ));
}
- sc->sc_beacon_cal = !!val && beacon_cal;
+ sc->sc_beacon_cal = !!val;
}
/*
@@ -3008,7 +3004,7 @@ ath_reset(struct net_device *dev)
* XXX: starting the calibration too early seems to lead to
* problems with the beacons.
*/
- sc->sc_lastcal = jiffies;
+ sc->sc_nextcal = jiffies + msecs_to_jiffies(sc->sc_cal_interval * 1000);
/*
* Convert to a HAL channel description with the flags
@@ -5430,10 +5426,9 @@ ath_beacon_send(struct ath_softc *sc, in
"Invoking ath_hal_txstart with sc_bhalq: %d\n",
sc->sc_bhalq);
ath_hal_txstart(ah, sc->sc_bhalq);
- if (sc->sc_beacon_cal && (jiffies > sc->sc_lastcal + (ath_calinterval * HZ))) {
- sc->sc_cal_ch.expires = jiffies + msecs_to_jiffies(10);
- add_timer(&sc->sc_cal_ch);
- }
+ if (sc->sc_beacon_cal && ((sc->sc_bmisscount == 3) ||
+ (jiffies > sc->sc_nextcal)))
+ mod_timer(&sc->sc_cal_ch, jiffies + 1);
sc->sc_stats.ast_be_xmit++; /* XXX per-VAP? */
}
@@ -9104,6 +9099,7 @@ ath_startrecv(struct ath_softc *sc)
dev->mtu, sc->sc_cachelsz, sc->sc_rxbufsize);
sc->sc_rxlink = NULL;
+ ath_set_beacon_cal(sc, IEEE80211_IS_MODE_BEACON(sc->sc_ic.ic_opmode));
STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) {
int error = ath_rxbuf_init(sc, bf);
ATH_RXBUF_RESET(bf);
@@ -9320,7 +9316,7 @@ ath_chan_set(struct ath_softc *sc, struc
jiffies + (sc->sc_dfs_cac_period * HZ));
/* This is a good time to start a calibration */
- ath_set_beacon_cal(sc, 1);
+ mod_timer(&sc->sc_cal_ch, jiffies + 1);
}
/*
* re configure beacons when it is a turbo mode switch.
@@ -9414,25 +9410,23 @@ ath_calibrate(unsigned long arg)
if (isIQdone == AH_TRUE) {
/* Unless user has overridden calibration interval,
* upgrade to less frequent calibration */
- if (ath_calinterval == ATH_SHORT_CALINTERVAL)
- ath_calinterval = ATH_LONG_CALINTERVAL;
+ if (sc->sc_cal_interval == ATH_SHORT_CALINTERVAL)
+ sc->sc_cal_interval = ATH_LONG_CALINTERVAL;
}
else {
/* Unless user has overridden calibration interval,
* downgrade to more frequent calibration */
- if (ath_calinterval == ATH_LONG_CALINTERVAL)
- ath_calinterval = ATH_SHORT_CALINTERVAL;
+ if (sc->sc_cal_interval == ATH_LONG_CALINTERVAL)
+ sc->sc_cal_interval = ATH_SHORT_CALINTERVAL;
}
DPRINTF(sc, ATH_DEBUG_CALIBRATE, "Channel %u/%x -- IQ %s.\n",
sc->sc_curchan.channel, sc->sc_curchan.channelFlags,
isIQdone ? "done" : "not done");
- sc->sc_lastcal = jiffies;
- if (!sc->sc_beacon_cal) {
- sc->sc_cal_ch.expires = jiffies + (ath_calinterval * HZ);
- add_timer(&sc->sc_cal_ch);
- }
+ sc->sc_nextcal = jiffies + msecs_to_jiffies(sc->sc_cal_interval * 1000);
+ if (!sc->sc_beacon_cal)
+ mod_timer(&sc->sc_cal_ch, sc->sc_nextcal);
}
static void
@@ -9540,9 +9534,6 @@ ath_newstate(struct ieee80211vap *vap, e
ieee80211_state_name[vap->iv_state],
ieee80211_state_name[nstate]);
- if (!sc->sc_beacon_cal)
- del_timer(&sc->sc_cal_ch); /* periodic calibration timer */
-
ath_hal_setledstate(ah, leds[nstate]); /* set LED */
netif_stop_queue(dev); /* before we do anything else */
@@ -9764,10 +9755,7 @@ ath_newstate(struct ieee80211vap *vap, e
IEEE80211_IS_MODE_DFS_MASTER(vap->iv_opmode)) {
DPRINTF(sc, ATH_DEBUG_STATE | ATH_DEBUG_DOTH,
"VAP -> DFSWAIT_PENDING \n");
- /* start calibration timer with a really small value
- * 1/10 sec */
- if (!sc->sc_beacon_cal)
- mod_timer(&sc->sc_cal_ch, jiffies + (HZ/10));
+ mod_timer(&sc->sc_cal_ch, jiffies + 1);
/* wake the receiver */
netif_wake_queue(dev);
/* don't do the other usual stuff... */
@@ -9809,12 +9797,6 @@ done:
/* Invoke the parent method to complete the work. */
error = avp->av_newstate(vap, nstate, arg);
- /* Finally, start any timers. */
- if (nstate == IEEE80211_S_RUN && !sc->sc_beacon_cal) {
- /* start periodic recalibration timer */
- mod_timer(&sc->sc_cal_ch, jiffies + (ath_calinterval * HZ));
- }
-
#ifdef ATH_SUPERG_XR
if (vap->iv_flags & IEEE80211_F_XR &&
nstate == IEEE80211_S_RUN)
--- a/ath/if_athvar.h
+++ b/ath/if_athvar.h
@@ -832,7 +832,8 @@ struct ath_softc {
struct ieee80211_channel *sc_last_chan;
int sc_beacon_cal; /* use beacon timer for calibration */
- u_int64_t sc_lastcal; /* last time the calibration was performed */
+ u_int64_t sc_nextcal; /* last time the calibration was performed */
+ int sc_cal_interval; /* current calibration interval */
struct timer_list sc_cal_ch; /* calibration timer */
HAL_NODE_STATS sc_halstats; /* station-mode rssi stats */