qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-22 00:26:20 +03:00
Code
096ce1d44c
openwrt-xburst/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch

2643 lines
94 KiB
Diff
Raw Normal View History

first ar531x support for 2.4, thx Mile Albon, some addons from me for mips big endian toolchain git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2005-12-25 22:04:16 +02:00
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c
--- linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c 2005-12-24 20:29:42.102311328 +0000
@@ -0,0 +1,217 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * Basic support for polled character input/output
+ * using the AR531X's serial port.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/serial.h>
+#include <asm/gdb-stub.h>
+
+#include "ar531xlnx.h"
+
+#if CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB
+/* base addr of uart and clock timing */
+#define BASE 0xbc000003
+
+/* distance in bytes between two serial registers */
+#define REG_OFFSET 4
+
+/*
+ * 0 - we need to do serial init
+ * 1 - skip serial init
+ */
+static int serialPortInitialized = 0;
+
+/*
+ * * the default baud rate *if* we do serial init
+ * */
+#define BAUD_DEFAULT UART16550_BAUD_9600
+
+/* === END OF CONFIG === */
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* register offset */
+#define OFS_RCV_BUFFER (0*REG_OFFSET)
+#define OFS_TRANS_HOLD (0*REG_OFFSET)
+#define OFS_SEND_BUFFER (0*REG_OFFSET)
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile u8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile u8*)(BASE + y))) = z)
+
+void
+debugPortInit(u32 baud, u8 data, u8 parity, u8 stop)
+{
+ /* Pull UART out of reset */
+ sysRegWrite(AR531X_RESET,
+ sysRegRead(AR531X_RESET) & ~(AR531X_RESET_UART0));
+
+ /* disable interrupts */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ u32 divisor;
+ u32 uart_clock_rate = ar531x_cpu_frequency() / 4;
+ u32 base_baud = uart_clock_rate / 16;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = base_baud / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+u8
+getDebugChar(void)
+{
+ if (!serialPortInitialized) {
+ serialPortInitialized = 1;
+ debugPortInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+#if CONFIG_KGDB
+/*
+ * Peek at the most recently received character.
+ * Don't wait for a new character to be received.
+ */
+u8
+peekDebugChar(void)
+{
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+static int kgdbInitialized = 0;
+
+void
+kgdbInit(void)
+{
+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+ if (!kgdbInitialized) {
+ printk("Setting debug traps - please connect the remote debugger.\n");
+ set_debug_traps();
+ kgdbInitialized = 1;
+ }
+ breakpoint();
+}
+
+int
+kgdbEnabled(void)
+{
+ return kgdbInitialized;
+}
+
+#define DEBUG_CHAR '\001';
+
+int
+kgdbInterrupt(void)
+{
+ if (!kgdbInitialized) {
+ return 0;
+ }
+
+ /*
+ * Try to avoid swallowing too much input: Only consume
+ * a character if nothing new has arrived. Yes, there's
+ * still a small hole here, and we may lose an input
+ * character now and then.
+ */
+ if (UART16550_READ(OFS_LINE_STATUS) & 1) {
+ return 0;
+ } else {
+ return UART16550_READ(OFS_RCV_BUFFER) == DEBUG_CHAR;
+ }
+}
+#endif
+
+
+void
+putDebugChar(char byte)
+{
+ if (!serialPortInitialized) {
+ serialPortInitialized = 1;
+ debugPortInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ }
+#endif /* CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB */
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xgpio.c linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c
--- linux-2.4.32/arch/mips/ar531x/ar531xgpio.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c 2005-12-24 20:29:42.102311328 +0000
@@ -0,0 +1,141 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * Support for GPIO -- General Purpose Input/Output Pins
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "ar531xlnx.h"
+
+/* GPIO Interrupt Support */
+
+/* Turn on the specified AR531X_GPIO_IRQ interrupt */
+static unsigned int
+ar531x_gpio_intr_startup(unsigned int irq)
+{
+ ar531x_gpio_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_GPIO_IRQ interrupt */
+static void
+ar531x_gpio_intr_shutdown(unsigned int irq)
+{
+ ar531x_gpio_intr_disable(irq);
+}
+
+u32 gpioIntMask = 0;
+
+/* Enable the specified AR531X_GPIO_IRQ interrupt */
+void
+ar531x_gpio_intr_enable(unsigned int irq)
+{
+ u32 reg;
+ int gpio;
+
+ gpio = irq - AR531X_GPIO_IRQ_BASE;
+ gpioIntMask |= gpio;
+
+ reg = sysRegRead(AR531X_GPIO_CR);
+ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
+ reg |= GPIO_CR_I(gpio);
+ reg |= GPIO_CR_INT(gpio);
+
+ sysRegWrite(AR531X_GPIO_CR, reg);
+ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
+}
+
+/* Disable the specified AR531X_GPIO_IRQ interrupt */
+void
+ar531x_gpio_intr_disable(unsigned int irq)
+{
+ u32 reg;
+ int gpio;
+
+ gpio = irq - AR531X_GPIO_IRQ_BASE;
+
+ reg = sysRegRead(AR531X_GPIO_CR);
+ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
+ reg |= GPIO_CR_I(gpio);
+ /* No GPIO_CR_INT bit */
+
+ sysRegWrite(AR531X_GPIO_CR, reg);
+ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
+
+ gpioIntMask &= ~gpio;
+}
+
+static void
+ar531x_gpio_intr_ack(unsigned int irq)
+{
+ ar531x_gpio_intr_disable(irq);
+}
+
+static void
+ar531x_gpio_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar531x_gpio_intr_enable(irq);
+}
+
+static void
+ar531x_gpio_intr_set_affinity(unsigned int irq, unsigned long mask)
+{
+ /* Only 1 CPU; ignore affinity request */
+}
+
+int ar531x_gpio_irq_base;
+
+struct hw_interrupt_type ar531x_gpio_intr_controller = {
+ "AR531X GPIO",
+ ar531x_gpio_intr_startup,
+ ar531x_gpio_intr_shutdown,
+ ar531x_gpio_intr_enable,
+ ar531x_gpio_intr_disable,
+ ar531x_gpio_intr_ack,
+ ar531x_gpio_intr_end,
+ ar531x_gpio_intr_set_affinity,
+};
+
+void
+ar531x_gpio_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &ar531x_gpio_intr_controller;
+ }
+
+ ar531x_gpio_irq_base = irq_base;
+}
+
+/* ARGSUSED */
+void
+spurious_gpio_handler(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ u32 gpioDataIn;
+
+ gpioDataIn = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
+
+ printk("spurious_gpio_handler: 0x%x di=0x%8.8x gpioIntMask=0x%8.8x\n",
+ cpl, gpioDataIn, gpioIntMask);
+}
+
+struct irqaction spurious_gpio =
+ {spurious_gpio_handler, SA_INTERRUPT, 0, "spurious_gpio",
+ NULL, NULL};
+
diff -urN linux-2.4.32/arch/mips/ar531x/ar531x.h linux-2.4.32.new/arch/mips/ar531x/ar531x.h
--- linux-2.4.32/arch/mips/ar531x/ar531x.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531x.h 2005-12-24 20:29:42.102311328 +0000
@@ -0,0 +1,280 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+#ifndef AR531X_H
+#define AR531X_H 1
+
+#include <asm/addrspace.h>
+
+/* Address Map */
+#define AR531X_WLAN0 0x18000000
+#define AR531X_WLAN1 0x18500000
+#define AR531X_ENET0 0x18100000
+#define AR531X_ENET1 0x18200000
+#define AR531X_SDRAMCTL 0x18300000
+#define AR531X_FLASHCTL 0x18400000
+#define AR531X_APBBASE 0x1c000000
+#define AR531X_FLASH 0x1e000000
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF 0xc8
+#define AR531X_RADIO0_MASK 0x0003
+#define AR531X_RADIO1_MASK 0x000c
+#define AR531X_RADIO1_S 2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI 0x0001
+#define AR531X_WD_CTRL_RESET 0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE 0x0000
+#define AR531X_ISR_TIMER 0x0001
+#define AR531X_ISR_AHBPROC 0x0002
+#define AR531X_ISR_AHBDMA 0x0004
+#define AR531X_ISR_GPIO 0x0008
+#define AR531X_ISR_UART0 0x0010
+#define AR531X_ISR_UART0DMA 0x0020
+#define AR531X_ISR_WD 0x0040
+#define AR531X_ISR_LOCAL 0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+ AR531X_RESET_WLAN0 |\
+ AR531X_RESET_WARM_WLAN0_MAC |\
+ AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+ AR531X_RESET_WLAN1 |\
+ AR531X_RESET_WARM_WLAN1_MAC |\
+ AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0 0x0001
+#define AR531X_ENABLE_ENET0 0x0002
+#define AR531X_ENABLE_ENET1 0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ 0xf000
+#define AR531X_REV_WMAC_MAJ_S 12
+#define AR531X_REV_WMAC_MIN 0x0f00
+#define AR531X_REV_WMAC_MIN_S 8
+#define AR531X_REV_MAJ 0x00f0
+#define AR531X_REV_MAJ_S 4
+#define AR531X_REV_MIN 0x000f
+#define AR531X_REV_MIN_S 0
+#define AR531X_REV_CHIP (REV_MAJ|REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312 0x4
+#define AR531X_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+/* GPIO Address Map */
+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+
+
+typedef unsigned int AR531X_REG;
+
+#define sysRegRead(phys) \
+ (*(volatile AR531X_REG *)PHYS_TO_K1(phys))
+
+#define sysRegWrite(phys, val) \
+ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
+
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar531x_boarddata {
+ u32 magic; /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 config; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0Mac[6];
+ u8 enet0Mac[6];
+ u8 enet1Mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1Mac[6]; /* (ar5212) */
+};
+#endif /* AR531X_H */
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xintr.S linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S
--- linux-2.4.32/arch/mips/ar531x/ar531xintr.S 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S 2005-12-24 20:29:42.103311176 +0000
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * Glue code to save registers and get us to the interrupt dispatcher
+ */
+ .text
+ .set noat
+ .align 5
+NESTED(ar531x_interrupt_receive, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ move a0, sp
+ jal ar531x_irq_dispatch
+
+ j ret_from_irq
+
+ END(ar531x_interrupt_receive)
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xirq.c linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c
--- linux-2.4.32/arch/mips/ar531x/ar531xirq.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c 2005-12-24 20:29:42.132306768 +0000
@@ -0,0 +1,292 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * Interrupt support for AR531X WiSOC.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+
+#include "ar531xlnx.h"
+#include <asm/irq_cpu.h>
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+
+static void ar531x_misc_intr_enable(unsigned int irq);
+static void ar531x_misc_intr_disable(unsigned int irq);
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar531x_misc_intr_startup(unsigned int irq)
+{
+ ar531x_misc_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar531x_misc_intr_shutdown(unsigned int irq)
+{
+ ar531x_misc_intr_disable(irq);
+}
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar531x_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar531x_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+static void
+ar531x_misc_intr_ack(unsigned int irq)
+{
+ ar531x_misc_intr_disable(irq);
+}
+
+static void
+ar531x_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar531x_misc_intr_enable(irq);
+}
+
+static void
+ar531x_misc_intr_set_affinity(unsigned int irq, unsigned long mask)
+{
+ /* Only 1 CPU; ignore affinity request */
+}
+
+struct hw_interrupt_type ar531x_misc_intr_controller = {
+ "AR531X MISC",
+ ar531x_misc_intr_startup,
+ ar531x_misc_intr_shutdown,
+ ar531x_misc_intr_enable,
+ ar531x_misc_intr_disable,
+ ar531x_misc_intr_ack,
+ ar531x_misc_intr_end,
+ ar531x_misc_intr_set_affinity,
+};
+
+int ar531x_misc_irq_base;
+
+/*
+ * Determine interrupt source among interrupts that use IP6
+ */
+void
+ar531x_misc_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &ar531x_misc_intr_controller;
+ }
+
+ ar531x_misc_irq_base = irq_base;
+}
+
+/* ARGSUSED */
+void
+spurious_irq_handler(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ /*
+ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n",
+ cpl, cause_intrs, status_intrs);
+ */
+}
+
+/* ARGSUSED */
+void
+spurious_misc_handler(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ /*
+ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n",
+ cpl, ar531x_isr, ar531x_imr);
+ */
+}
+
+void
+ar531x_timer_handler(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ (void)sysRegRead(AR531X_TIMER); /* clear interrupt */
+}
+
+void
+ar531x_ahb_proc_handler(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ u32 procAddr;
+ u32 proc1;
+ u32 dmaAddr;
+ u32 dma1;
+
+ proc1 = sysRegRead(AR531X_PROC1);
+ procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
+ dma1 = sysRegRead(AR531X_DMA1);
+ dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */
+
+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+ procAddr, proc1, dmaAddr, dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+}
+
+static struct irqaction cascade =
+ {no_action, SA_INTERRUPT, 0, "cascade",
+ NULL, NULL};
+
+static struct irqaction spurious_irq =
+ {spurious_irq_handler, SA_INTERRUPT, 0, "spurious_irq",
+ NULL, NULL};
+
+static struct irqaction spurious_misc =
+ {spurious_misc_handler, SA_INTERRUPT, 0, "spurious_misc",
+ NULL, NULL};
+
+static struct irqaction ar531x_timer_interrupt =
+ {ar531x_timer_handler, SA_INTERRUPT, 0, "ar531x_timer_interrupt",
+ NULL, NULL};
+
+static struct irqaction ar531x_ahb_proc_interrupt =
+ {ar531x_ahb_proc_handler, SA_INTERRUPT, 0, "ar531x_ahb_proc_interrupt",
+ NULL, NULL};
+
+extern asmlinkage void ar531x_interrupt_receive(void);
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+void
+ar531x_irq_dispatch(struct pt_regs *regs)
+{
+ int cause_intrs = regs->cp0_cause;
+ int status_intrs = regs->cp0_status;
+ int pending = cause_intrs & status_intrs;
+
+ if (pending & CAUSEF_IP2) {
+ do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs);
+ }
+ else if (pending & CAUSEF_IP3) {
+ do_IRQ(AR531X_IRQ_ENET0_INTRS, regs);
+ }
+ else if (pending & CAUSEF_IP4) {
+ do_IRQ(AR531X_IRQ_ENET1_INTRS, regs);
+ }
+ else if (pending & CAUSEF_IP5) {
+ do_IRQ(AR531X_IRQ_WLAN1_INTRS, regs);
+ }
+ else if (pending & CAUSEF_IP6) {
+ AR531X_REG ar531x_isr = sysRegRead(AR531X_ISR);
+ AR531X_REG ar531x_imr = sysRegRead(AR531X_IMR);
+ unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr;
+
+ if (ar531x_misc_intrs & AR531X_ISR_TIMER)
+ do_IRQ(AR531X_MISC_IRQ_TIMER, regs);
+ else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs);
+ else if (ar531x_misc_intrs & AR531X_ISR_AHBDMA)
+ do_IRQ(AR531X_MISC_IRQ_AHB_DMA, regs);
+ else if (ar531x_misc_intrs & AR531X_ISR_GPIO)
+ {
+ int i;
+ u32 gpioIntPending;
+
+ gpioIntPending = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
+ for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
+ if (gpioIntPending & (1 << i))
+ do_IRQ(AR531X_GPIO_IRQ(i), regs);
+ }
+ }
+ else if ((ar531x_misc_intrs & AR531X_ISR_UART0) ||
+ (ar531x_misc_intrs & AR531X_ISR_UART0DMA)) {
+ do_IRQ(AR531X_MISC_IRQ_UART0, regs);
+#if CONFIG_KGDB
+ if (kgdbInterrupt()) {
+ if (!user_mode(regs))
+ set_async_breakpoint((unsigned long *)&regs->cp0_epc);
+ }
+#endif /* CONFIG_KGDB */
+ }
+ else if (ar531x_misc_intrs & AR531X_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs);
+ else if (ar531x_misc_intrs & AR531X_ISR_LOCAL)
+ do_IRQ(AR531X_MISC_IRQ_LOCAL, regs);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE, regs);
+ } else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK, regs);
+ else
+ do_IRQ(AR531X_IRQ_NONE, regs);
+}
+
+void __init init_IRQ(void)
+{
+ init_generic_irq();
+ set_except_vector(0, ar531x_interrupt_receive);
+
+ /* Initialize interrupt controllers */
+ mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
+ ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE);
+ ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
+ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
+ /*
+ * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup.
+ */
+
+ /* Default "spurious interrupt" handlers */
+ setup_irq(AR531X_IRQ_NONE, &spurious_irq);
+ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc);
+ setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio);
+
+ setup_irq(AR531X_MISC_IRQ_TIMER, &ar531x_timer_interrupt);
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt);
+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
+
+#ifdef CONFIG_KGDB
+#if CONFIG_EARLY_STOP
+ kgdbInit();
+#endif
+#endif
+}
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xksyms.c linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c
--- linux-2.4.32/arch/mips/ar531x/ar531xksyms.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c 2005-12-24 20:29:42.132306768 +0000
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+#include <linux/module.h>
+#include "asm/atheros/ar531xbsp.h"
+
+#if CONFIG_KGDB
+EXPORT_SYMBOL(kgdbInit);
+EXPORT_SYMBOL(kgdbEnabled);
+#endif
+EXPORT_SYMBOL(ar531x_sys_frequency);
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xlnx.h linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h
--- linux-2.4.32/arch/mips/ar531x/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h 2005-12-24 20:29:42.133306616 +0000
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * This file contains definitions needed in order to compile
+ * AR531X products for linux. Definitions that are largely
+ * AR531X-specific and independent of operating system belong
+ * in ar531x.h rather than this file.
+ */
+#include "ar531x.h"
+
+#define MIPS_CPU_IRQ_BASE 0x00
+#define AR531X_HIGH_PRIO 0x10
+#define AR531X_MISC_IRQ_BASE 0x20
+#define AR531X_GPIO_IRQ_BASE 0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_COUNT 9
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1
+#define AR531X_GPIO_IRQ_COUNT 9
+
+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
+#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr)
+#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr)
+#define IS_UNMAPPED_VADDR(vaddr) \
+ ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1))
+
+/* IOCTL commands for /proc/ar531x */
+#define AR531X_CTRL_DO_BREAKPOINT 1
+#define AR531X_CTRL_DO_MADWIFI 2
+
+/*
+ * Definitions for operating system portability.
+ * These are vxWorks-->Linux translations.
+ */
+#define LOCAL static
+#define BOOL int
+#define TRUE 1
+#define FALSE 0
+#define UINT8 u8
+#define UINT16 u16
+#define UINT32 u32
+#define PRINTF printk
+#if /* DEBUG */ 1
+#define DEBUG_PRINTF printk
+#define INLINE
+#else
+DEBUG_PRINTF while (0) printk
+#define INLINE inline
+#endif
+#define sysUDelay(usecs) udelay(usecs)
+#define sysMsDelay(msecs) mdelay(msecs)
+typedef volatile UINT8 *VIRT_ADDR;
+#define MALLOC(sz) kmalloc(sz, GFP_KERNEL)
+#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC)
+#define FREE(ptr) kfree((void *)ptr)
+#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0)
+#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0)
+#define ASSERT(x) BSP_BUG_ON(!(x))
+
+extern struct ar531x_boarddata *ar531x_board_configuration;
+extern char *ar531x_radio_configuration;
+extern char *enet_mac_address_get(int MACUnit);
+
+extern void kgdbInit(void);
+extern int kgdbEnabled(void);
+extern void breakpoint(void);
+extern int kgdbInterrupt(void);
+extern unsigned int ar531x_cpu_frequency(void);
+extern unsigned int ar531x_sys_frequency(void);
+
+/* GPIO support */
+extern struct irqaction spurious_gpio;
+extern unsigned int gpioIntMask;
+extern void ar531x_gpio_intr_init(int irq_base);
+extern void ar531x_gpio_ctrl_output(int gpio);
+extern void ar531x_gpio_ctrl_input(int gpio);
+extern void ar531x_gpio_set(int gpio, int val);
+extern int ar531x_gpio_get(int gpio);
+extern void ar531x_gpio_intr_enable(unsigned int irq);
+extern void ar531x_gpio_intr_disable(unsigned int irq);
+
+/* Watchdog Timer support */
+extern int watchdog_start(unsigned int milliseconds);
+extern int watchdog_stop(void);
+extern int watchdog_is_enabled(void);
+extern unsigned int watchdog_min_timer_reached(void);
+extern void watchdog_notify_alive(void);
+
+#define A_DATA_CACHE_INVAL(start, length) \
+ dma_cache_inv((UINT32)(start),(length))
+
+#define sysWbFlush() mb()
+
+#define intDisable(x) cli()
+#define intEnable(x) sti()
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xprom.c linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c
--- linux-2.4.32/arch/mips/ar531x/ar531xprom.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c 2005-12-24 20:29:42.133306616 +0000
@@ -0,0 +1,84 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include "ar531xlnx.h"
+
+#define COMMAND_LINE_SIZE 512
+
+char arcs_cmdline[COMMAND_LINE_SIZE];
+
+void __init prom_init(int argc, char *argv[])
+{
+ int i;
+ unsigned int memcfg1;
+ int bank0AC, bank1AC;
+ int memsz_in_mb;
+
+ strcpy(arcs_cmdline, "console=ttyS0,9600");
+ for (i=0; i<argc; i++) {
+ strcat(arcs_cmdline, " ");
+ strcat(arcs_cmdline, argv[i]);
+ }
+
+ mips_machgroup = MACH_GROUP_AR531X;
+#ifdef CONFIG_APUNUSED
+ mips_machtype = MACH_ATHEROS_UNUSED;
+#endif
+#ifdef CONFIG_AP30
+ mips_machtype = MACH_ATHEROS_AP30;
+#endif
+#ifdef CONFIG_AP33
+ mips_machtype = MACH_ATHEROS_AP33;
+#endif
+#ifdef CONFIG_AP38
+ mips_machtype = MACH_ATHEROS_AP38;
+#endif
+#ifdef CONFIG_AP43
+ mips_machtype = MACH_ATHEROS_AP43;
+#endif
+#ifdef CONFIG_AP48
+ mips_machtype = MACH_ATHEROS_AP48;
+#endif
+#ifdef CONFIG_PB32
+ mips_machtype = MACH_ATHEROS_PB32;
+#endif
+
+
+ /* Determine SDRAM size based on Address Checks done at startup */
+ memcfg1 = sysRegRead(AR531X_MEM_CFG1);
+ bank0AC = (memcfg1 & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+ bank1AC = (memcfg1 & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+ memsz_in_mb = (bank0AC ? (1 << (bank0AC+1)) : 0)
+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
+
+ /*
+ * By default, use all available memory. You can override this
+ * to use, say, 8MB by specifying "mem=8M" as an argument on the
+ * linux bootup command line.
+ */
+ add_memory_region(0, memsz_in_mb << 20, BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff -urN linux-2.4.32/arch/mips/ar531x/ar531xsetup.c linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c
--- linux-2.4.32/arch/mips/ar531x/ar531xsetup.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c 2005-12-24 20:29:42.133306616 +0000
@@ -0,0 +1,240 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+ */
+
+/*
+ * Initialization for ar531x SOC.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/serial.h>
+
+#include "ar531xlnx.h"
+
+void
+ar531x_restart(char *command)
+{
+ for(;;) {
+ sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
+ }
+}
+
+void
+ar531x_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1);
+}
+
+void
+ar531x_power_off(void)
+{
+ ar531x_halt();
+}
+
+const char *
+get_system_type(void)
+{
+ return "Atheros AR531X";
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+unsigned int
+ar531x_cpu_frequency(void)
+{
+ static unsigned int ar531x_calculated_cpu_freq;
+ unsigned int clockctl1_predivide_mask;
+ unsigned int clockctl1_predivide_shift;
+ unsigned int clockctl1_multiplier_mask;
+ unsigned int clockctl1_multiplier_shift;
+ unsigned int clockctl1_doubler_mask;
+ int wisoc_revision;
+
+ /*
+ * Trust the bootrom's idea of cpu frequency.
+ */
+ ar531x_calculated_cpu_freq = sysRegRead(AR5312_SCRATCH);
+ if (ar531x_calculated_cpu_freq)
+ return ar531x_calculated_cpu_freq;
+
+ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
+ if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
+ clockctl1_predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ clockctl1_predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ clockctl1_multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ clockctl1_multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ clockctl1_doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ clockctl1_predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ clockctl1_predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ clockctl1_multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ clockctl1_multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ clockctl1_doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ *
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ * cpuFrez = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+ if (ar531x_calculated_cpu_freq == 0) {
+ unsigned int clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
+
+ int preDivideSelect = (clockCtl1 & clockctl1_predivide_mask) >>
+ clockctl1_predivide_shift;
+
+ int preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+
+ int multiplier = (clockCtl1 & clockctl1_multiplier_mask) >>
+ clockctl1_multiplier_shift;
+
+ if (clockCtl1 & clockctl1_doubler_mask) {
+ multiplier = multiplier << 1;
+ }
+
+ ar531x_calculated_cpu_freq = (40000000 / preDivisor) * multiplier;
+ }
+
+ return ar531x_calculated_cpu_freq;
+}
+
+unsigned int
+ar531x_sys_frequency(void)
+{
+ static unsigned int ar531x_calculated_sys_freq = 0;
+
+ if (ar531x_calculated_sys_freq == 0) {
+ ar531x_calculated_sys_freq = ar531x_cpu_frequency() / 4;
+ }
+
+ return ar531x_calculated_sys_freq;
+}
+
+static void __init
+flash_setup(void)
+{
+ UINT32 flash_ctl;
+
+ /* Configure flash bank 0 */
+ flash_ctl = FLASHCTL_E |
+ FLASHCTL_AC_8M |
+ FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) |
+ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+ sysRegWrite(AR531X_FLASHCTL0, flash_ctl);
+
+ /* Disable other flash banks */
+ sysRegWrite(AR531X_FLASHCTL1,
+ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ sysRegWrite(AR531X_FLASHCTL2,
+ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+}
+
+
+
+void __init
+serial_setup(void)
+{
+ struct serial_struct s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = STD_COM_FLAGS;
+ s.io_type = SERIAL_IO_MEM;
+ s.baud_base = ar531x_sys_frequency()/16;
+ s.irq = AR531X_MISC_IRQ_UART0;
+ s.iomem_reg_shift = 2;
+ s.iomem_base = (u8 *)0xbc000003;
+
+ if (early_serial_setup(&s) != 0)
+ printk(KERN_ERR "early_serial_setup failed\n");
+}
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+static void __init
+ar531x_timer_setup(struct irqaction *irq)
+{
+ unsigned int count;
+
+ /* Usually irq is timer_irqaction (timer_interrupt) */
+ setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
+
+ /* to generate the first CPU timer interrupt */
+ count = read_c0_count();
+ write_c0_compare(count + 1000);
+}
+
+extern void (*board_time_init)(void);
+
+static void __init
+ar531x_time_init(void)
+{
+ mips_hpt_frequency = ar531x_cpu_frequency() / 2;
+}
+
+void __init
+ar531x_setup(void)
+{
+ /* Clear any lingering AHB errors */
+ sysRegRead(AR531X_PROCADDR);
+ sysRegRead(AR531X_DMAADDR);
+
+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+ /* Disable data watchpoints */
+ write_c0_watchlo0(0);
+
+ board_time_init = ar531x_time_init;
+ board_timer_setup = ar531x_timer_setup;
+
+ _machine_restart = ar531x_restart;
+ _machine_halt = ar531x_halt;
+ _machine_power_off = ar531x_power_off;
+
+ flash_setup();
+ serial_setup();
+}
diff -urN linux-2.4.32/arch/mips/ar531x/Makefile linux-2.4.32.new/arch/mips/ar531x/Makefile
--- linux-2.4.32/arch/mips/ar531x/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/Makefile 2005-12-24 20:29:42.010325312 +0000
@@ -0,0 +1,33 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
+#
+
+# Makefile for Atheros ar531x boards
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+.S.s:
+ $(CPP) $(CFLAGS) $< -o $*.s
+.S.o:
+ $(CC) $(CFLAGS) -D__ASSEMBLY__ -c $< -o $*.o
+
+O_TARGET:= ar531x.o
+
+export-objs = ar531xksyms.o
+
+obj-y := ar531xdbg_io.o \
+ ar531xsetup.o \
+ ar531xprom.o \
+ ar531xirq.o \
+ ar531xintr.o \
+ ar531xgpio.o \
+ ar531xksyms.o
+
+include $(TOPDIR)/Rules.make
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links 2005-12-24 20:29:42.011325160 +0000
@@ -0,0 +1,33 @@
+/usr/bin/[
+/sbin/brctl
+/bin/cat
+/bin/chmod
+/bin/cp
+/bin/df
+/bin/echo
+/bin/false
+/sbin/ifconfig
+/sbin/init
+/sbin/insmod
+/bin/kill
+/bin/ls
+/sbin/lsmod
+/bin/mkdir
+/sbin/modprobe
+/bin/mount
+/bin/msh
+/bin/mv
+/bin/ping
+/bin/ps
+/bin/pwd
+/sbin/reboot
+/bin/rm
+/bin/rmdir
+/sbin/rmmod
+/sbin/route
+/bin/sh
+/usr/bin/test
+/usr/bin/top
+/bin/true
+/bin/umount
+/usr/bin/wget
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links 2005-12-24 20:29:42.011325160 +0000
@@ -0,0 +1,33 @@
+/usr/bin/[
+/sbin/brctl
+/bin/cat
+/bin/chmod
+/bin/cp
+/bin/df
+/bin/echo
+/bin/false
+/sbin/ifconfig
+/sbin/init
+/sbin/insmod
+/bin/kill
+/bin/ls
+/sbin/lsmod
+/bin/mkdir
+/sbin/modprobe
+/bin/mount
+/bin/msh
+/bin/mv
+/bin/ping
+/bin/ps
+/bin/pwd
+/sbin/reboot
+/bin/rm
+/bin/rmdir
+/sbin/rmmod
+/sbin/route
+/bin/sh
+/usr/bin/test
+/bin/true
+/bin/umount
+/bin/uname
+/usr/bin/wget
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile 2005-12-24 20:29:42.011325160 +0000
@@ -0,0 +1,53 @@
+KERNEL_SOURCE=../../../..
+
+# The value for INITRDSIZE is extracted from linux/.config,
+# if it exists; otherwise, a default value is used.
+
+CONFIG_FILE = $(KERNEL_SOURCE)/.config
+
+ifeq ($(CONFIG_FILE),$(wildcard $(CONFIG_FILE)))
+
+include $(CONFIG_FILE)
+ifdef CONFIG_BLK_DEV_RAM_SIZE
+INITRDSIZE := $(shell echo $(CONFIG_BLK_DEV_RAM_SIZE))
+else
+INITRDSIZE := 8192
+endif
+
+else
+INITRDSIZE := 8192
+endif
+
+MOUNTPT = /mnt/xtmp
+
+ramdisk.gz: ramdisk
+ gzip -f ramdisk
+
+ramdisk:
+ ./makelinks
+ @echo "CREATING RAMDISK OF SIZE $(INITRDSIZE) on $@"
+ dd if=/dev/zero of=$@ bs=1k count=$(INITRDSIZE)
+ /sbin/mke2fs -vFm0 $@ $(INITRDSIZE)
+ if [ \! -e $(MOUNTPT) ]; then mkdir -p $(MOUNTPT) ; fi
+ mount -o loop $@ $(MOUNTPT)
+ @df $(MOUNTPT)
+ (cd rootdir; tar cf - . ) | (cd $(MOUNTPT) && tar xf - )
+ (cd $(MOUNTPT) ; chown -R root.root . )
+ @df $(MOUNTPT)
+ umount $(MOUNTPT)
+
+install:
+ @(if [ -d $(KERNEL_SOURCE)/arch/mips/ramdisk ]; \
+ then \
+ if [ -f ramdisk.gz ]; \
+ then \
+ cp ramdisk.gz $(KERNEL_SOURCE)/arch/mips/ramdisk/; \
+ else \
+ echo "No ramdisk.gz image"; \
+ fi; \
+ else \
+ echo "No ramdisk directory. Check KERNEL_SOURCE variable."; \
+ fi)
+
+clean:
+ rm -f ramdisk.gz ramdisk
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks 2005-12-24 20:29:42.012325008 +0000
@@ -0,0 +1,65 @@
+#!/bin/sh
+
+if [ -f busybox.links ]
+then
+ cat busybox.links | sed 's/\//ln -s -f \/bin\/busybox rootdir\//' | /bin/sh
+fi
+
+cons=" root tty 622"
+disk=" root disk 660"
+mtd=" root root 640"
+makedev () { # usage: makedev name [bcu] major minor owner group mode
+ if [ "$opt_v" ]
+ then if [ "$opt_d" ]
+ then echo "rm -f $1"
+ else echo "$1 = $2 $3 $4 $5:$6 $7"
+ fi
+ fi
+ [ ! "$opt_n" ] && rm -f $1 &&
+ [ ! "$opt_d" ] && mknod $1 $2 $3 $4 &&
+ chown $5:$6 $1 &&
+ chmod $7 $1
+}
+
+makedev rootdir/dev/console c 5 1 $cons
+makedev rootdir/dev/ram b 1 1 $disk
+makedev rootdir/dev/ram0 b 1 0 $disk
+makedev rootdir/dev/ram1 b 1 1 $disk
+makedev rootdir/dev/ram2 b 1 2 $disk
+makedev rootdir/dev/ram3 b 1 3 $disk
+makedev rootdir/dev/ram4 b 1 4 $disk
+makedev rootdir/dev/ram5 b 1 5 $disk
+makedev rootdir/dev/ram6 b 1 6 $disk
+makedev rootdir/dev/ram7 b 1 7 $disk
+makedev rootdir/dev/ram8 b 1 8 $disk
+makedev rootdir/dev/ram9 b 1 9 $disk
+makedev rootdir/dev/ram10 b 1 10 $disk
+makedev rootdir/dev/ram11 b 1 11 $disk
+makedev rootdir/dev/ram12 b 1 12 $disk
+makedev rootdir/dev/ram13 b 1 13 $disk
+makedev rootdir/dev/ram14 b 1 14 $disk
+makedev rootdir/dev/ram15 b 1 15 $disk
+
+makedev rootdir/dev/mtd0 c 90 0 $mtd
+makedev rootdir/dev/mtd1 c 90 2 $mtd
+makedev rootdir/dev/mtd2 c 90 4 $mtd
+makedev rootdir/dev/mtd3 c 90 6 $mtd
+makedev rootdir/dev/mtd4 c 90 8 $mtd
+makedev rootdir/dev/mtd5 c 90 10 $mtd
+makedev rootdir/dev/mtd6 c 90 12 $mtd
+makedev rootdir/dev/mtdblock0 b 31 0 $mtd
+makedev rootdir/dev/mtdblock1 b 31 1 $mtd
+makedev rootdir/dev/mtdblock2 b 31 2 $mtd
+makedev rootdir/dev/mtdblock3 b 31 3 $mtd
+makedev rootdir/dev/mtdblock4 b 31 4 $mtd
+makedev rootdir/dev/mtdblock5 b 31 5 $mtd
+makedev rootdir/dev/mtdblock6 b 31 6 $mtd
+makedev rootdir/dev/mtdr0 c 90 1 $mtd
+makedev rootdir/dev/mtdr1 c 90 3 $mtd
+makedev rootdir/dev/mtdr2 c 90 5 $mtd
+makedev rootdir/dev/mtdr3 c 90 7 $mtd
+makedev rootdir/dev/mtdr4 c 90 9 $mtd
+makedev rootdir/dev/mtdr5 c 90 11 $mtd
+makedev rootdir/dev/mtdr6 c 90 13 $mtd
+
+cd rootdir/dev;ln -sf ram1 ram
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/README linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/README 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README 2005-12-24 20:29:42.011325160 +0000
@@ -0,0 +1,40 @@
+How to build a ramdisk image for use as a root filesystem with AR531X
+
+Overview:
+In order to boot from a ramdisk root file system image, you will
+first create a root directory structure in the "rootdir" directory.
+Then run "make" to create a compressed root file system image in
+ramdisk.gz. Finally, copy this image into your kernel source tree
+and remake the kernel. The ramdisk image is then built into the
+kernel. When the kernel starts, it is uncompressed into RAM, and
+used as a root file system.
+
+If you'd like to use a pre-built ramdisk.gz rather than build
+one yourself:
+ cp arch/mips/ar531x/RAMDISK/ramdisk.gz arch/mips/ramdisk/ramdisk.gz
+
+Here are the detailed steps to build your own:
+
+1) Modify Makefile to point KERNEL_SOURCE at your linux source tree.
+
+2) Copy whatever additional files/directories/links you'd like to
+ under rootdir. Note that you're limited to CONFIG_BLK_DEV_RAM_SIZE
+ 1KB blocks, as specified in your linux/.config file.
+ Examples:
+ Copy busybox to rootdir/bin/
+ [NOTE: Copy busybox.links to this directory to
+ cause the makelinks script to automatically
+ set up all of the necessary busybox command links
+ in the rootdir/bin directory].
+
+ Copy any wireless driver modules into rootdir tree
+
+ You might want to make a copy of the rootdir directory
+ before you modify it, just in case you want to get back
+ to the original.
+
+3) LOGIN AS ROOT (e.g. "su") and type "make"
+
+4) Copy the resulting ramdisk.gz to your linux source tree under
+ arch/mips/ramdisk/ramdisk.gz
+ (or "make install" will do this step for you)
Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox differ
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 2005-12-24 20:29:42.063317256 +0000
@@ -0,0 +1 @@
+/proc /proc proc defaults 0 0
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group 2005-12-24 20:29:42.064317104 +0000
@@ -0,0 +1,18 @@
+root:x:0:
+wheel:x:10:
+bin:x:1:bin,daemon
+daemon:x:2:bin,daemon
+sys:x:3:bin,adm
+adm:x:4:adm,daemon
+tty:x:5:
+disk:x:6:
+lp:x:7:daemon,lp
+mem:x:8:
+kmem:x:9:
+operator:x:11:
+uucp:x:14:uucp
+dip:x:40:
+utmp:x:45:
+www:x:63:
+nobody:x:65534:
+users:x:100:
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 2005-12-24 20:29:42.064317104 +0000
@@ -0,0 +1,2 @@
+order hosts,bind
+multi on
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 2005-12-24 20:29:42.064317104 +0000
@@ -0,0 +1,2 @@
+::sysinit:/etc/rc.d/rcS
+::respawn:/bin/sh
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 2005-12-24 20:29:42.065316952 +0000
@@ -0,0 +1,16 @@
+# /etc/nsswitch.conf
+#
+# Name Service Switch configuration file.
+#
+
+passwd: compat
+shadow: compat
+group: compat
+
+hosts: files dns
+networks: files dns
+
+ethers: files
+protocols: files
+rpc: files
+services: files
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 2005-12-24 20:29:42.065316952 +0000
@@ -0,0 +1,11 @@
+root:x:0:0:root:/root:/bin/ash
+bin:x:1:1:bin:/bin:/bin/sh
+daemon:x:2:2:daemon:/usr/sbin:/bin/sh
+adm:x:3:4:adm:/adm:/bin/sh
+lp:x:4:7:lp:/var/spool/lpd:/bin/sh
+sync:x:5:0:sync:/bin:/bin/sync
+shutdown:x:6:11:shutdown:/sbin:/sbin/shutdown
+halt:x:7:0:halt:/sbin:/sbin/halt
+uucp:x:10:14:uucp:/var/spool/uucp:/bin/sh
+operator:x:11:0:Operator:/var:/bin/sh
+nobody:x:65534:65534:nobody:/home:/bin/sh
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 2005-12-24 20:29:42.066316800 +0000
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+mount -a
+mount -t jffs2 -o remount +w /
+# mount -t ramfs /dev/ram /ramdisk
+
+echo Load MADWiFi wlan module
+insmod ../../lib/modules/2.4.25/net/wlan.o
+
+echo Load MADWiFi Atheros HAL module
+insmod ../../lib/modules/2.4.25/net/ath_hal.o
+
+echo Load MADWiFi Atheros Driver module
+insmod ../../lib/modules/2.4.25/net/ath_lbus.o
+
+exit
+
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 2005-12-24 20:29:42.066316800 +0000
@@ -0,0 +1,18 @@
+# /etc/resolv.conf - DNS setup file
+#
+# possible entries are:
+#
+# domain <domain> Local domain name. If not present, the
+# gethostbyname syscall is used to
+# determine the local domain name.
+#
+# search <list_of_domains> Search list for hostname lookup.
+# The search list is normally determined
+# from the local domain name but it
+# can be set to a list of domains.
+#
+# nameserver <ip_addr> Define which server to contact
+# for DNS lookups. If there are
+# multiple nameserver lines (Max=3),
+# they are queried in the listed order.
+#
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 2005-12-24 20:29:42.066316800 +0000
@@ -0,0 +1,12 @@
+tty1
+tty2
+tty3
+tty4
+tty5
+tty6
+tty7
+tty8
+ttyS0
+ttyS1
+ttyS2
+ttyS3
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services 2005-12-24 20:29:42.066316800 +0000
@@ -0,0 +1,193 @@
+# $NetBSD: services,v 1.18 1996/03/26 00:07:58 mrg Exp $
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+# Updated from RFC 1340, ``Assigned Numbers'' (July 1992). Not all ports
+# are included, only the more common ones.
+#
+# from: @(#)services 5.8 (Berkeley) 5/9/91
+#
+tcpmux 1/tcp # TCP port service multiplexer
+echo 7/tcp
+echo 7/udp
+discard 9/tcp sink null
+discard 9/udp sink null
+systat 11/tcp users
+daytime 13/tcp
+daytime 13/udp
+netstat 15/tcp
+qotd 17/tcp quote
+msp 18/tcp # message send protocol
+msp 18/udp # message send protocol
+chargen 19/tcp ttytst source
+chargen 19/udp ttytst source
+ftp-data 20/tcp # default ftp data port
+ftp 21/tcp
+ssh 22/tcp
+ssh 22/udp
+telnet 23/tcp
+# 24 - private
+smtp 25/tcp mail
+# 26 - unassigned
+time 37/tcp timserver
+time 37/udp timserver
+rlp 39/udp resource # resource location
+nameserver 42/tcp name # IEN 116
+whois 43/tcp nicname
+domain 53/tcp nameserver # name-domain server
+domain 53/udp nameserver
+mtp 57/tcp # deprecated
+bootps 67/tcp # BOOTP server
+bootps 67/udp
+bootpc 68/tcp # BOOTP client
+bootpc 68/udp
+tftp 69/udp
+gopher 70/tcp # Internet Gopher
+gopher 70/udp
+rje 77/tcp netrjs
+finger 79/tcp
+www 80/tcp http # WorldWideWeb HTTP
+www 80/udp # HyperText Transfer Protocol
+link 87/tcp ttylink
+kerberos 88/tcp krb5 # Kerberos v5
+kerberos 88/udp
+supdup 95/tcp
+# 100 - reserved
+hostnames 101/tcp hostname # usually from sri-nic
+iso-tsap 102/tcp tsap # part of ISODE.
+csnet-ns 105/tcp cso-ns # also used by CSO name server
+csnet-ns 105/udp cso-ns
+rtelnet 107/tcp # Remote Telnet
+rtelnet 107/udp
+pop2 109/tcp pop-2 postoffice # POP version 2
+pop2 109/udp
+pop3 110/tcp pop-3 # POP version 3
+pop3 110/udp
+sunrpc 111/tcp
+sunrpc 111/udp
+auth 113/tcp authentication tap ident
+sftp 115/tcp
+uucp-path 117/tcp
+nntp 119/tcp readnews untp # USENET News Transfer Protocol
+ntp 123/tcp
+ntp 123/udp # Network Time Protocol
+netbios-ns 137/tcp # NETBIOS Name Service
+netbios-ns 137/udp
+netbios-dgm 138/tcp # NETBIOS Datagram Service
+netbios-dgm 138/udp
+netbios-ssn 139/tcp # NETBIOS session service
+netbios-ssn 139/udp
+imap2 143/tcp imap # Interim Mail Access Proto v2
+imap2 143/udp
+snmp 161/udp # Simple Net Mgmt Proto
+snmp-trap 162/udp snmptrap # Traps for SNMP
+cmip-man 163/tcp # ISO mgmt over IP (CMOT)
+cmip-man 163/udp
+cmip-agent 164/tcp
+cmip-agent 164/udp
+xdmcp 177/tcp # X Display Mgr. Control Proto
+xdmcp 177/udp
+nextstep 178/tcp NeXTStep NextStep # NeXTStep window
+nextstep 178/udp NeXTStep NextStep # server
+bgp 179/tcp # Border Gateway Proto.
+bgp 179/udp
+prospero 191/tcp # Cliff Neuman's Prospero
+prospero 191/udp
+irc 194/tcp # Internet Relay Chat
+irc 194/udp
+smux 199/tcp # SNMP Unix Multiplexer
+smux 199/udp
+at-rtmp 201/tcp # AppleTalk routing
+at-rtmp 201/udp
+at-nbp 202/tcp # AppleTalk name binding
+at-nbp 202/udp
+at-echo 204/tcp # AppleTalk echo
+at-echo 204/udp
+at-zis 206/tcp # AppleTalk zone information
+at-zis 206/udp
+z3950 210/tcp wais # NISO Z39.50 database
+z3950 210/udp wais
+ipx 213/tcp # IPX
+ipx 213/udp
+imap3 220/tcp # Interactive Mail Access
+imap3 220/udp # Protocol v3
+ulistserv 372/tcp # UNIX Listserv
+ulistserv 372/udp
+#
+# UNIX specific services
+#
+exec 512/tcp
+biff 512/udp comsat
+login 513/tcp
+who 513/udp whod
+shell 514/tcp cmd # no passwords used
+syslog 514/udp
+printer 515/tcp spooler # line printer spooler
+talk 517/udp
+ntalk 518/udp
+route 520/udp router routed # RIP
+timed 525/udp timeserver
+tempo 526/tcp newdate
+courier 530/tcp rpc
+conference 531/tcp chat
+netnews 532/tcp readnews
+netwall 533/udp # -for emergency broadcasts
+uucp 540/tcp uucpd # uucp daemon
+remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
+#
+webster 765/tcp # Network dictionary
+webster 765/udp
+# temporary entry (not officially registered by the Samba Team!)
+swat 901/tcp # Samba Web Administration Tool
+#
+# From ``Assigned Numbers'':
+#
+#> The Registered Ports are not controlled by the IANA and on most systems
+#> can be used by ordinary user processes or programs executed by ordinary
+#> users.
+#
+#> Ports are used in the TCP [45,106] to name the ends of logical
+#> connections which carry long term conversations. For the purpose of
+#> providing services to unknown callers, a service contact port is
+#> defined. This list specifies the port used by the server process as its
+#> contact port. While the IANA can not control uses of these ports it
+#> does register or list uses of these ports as a convienence to the
+#> community.
+#
+ingreslock 1524/tcp
+ingreslock 1524/udp
+prospero-np 1525/tcp # Prospero non-privileged
+prospero-np 1525/udp
+rfe 5002/tcp # Radio Free Ethernet
+rfe 5002/udp # Actually uses UDP only
+#
+#
+# Kerberos (Project Athena/MIT) services
+# Note that these are for Kerberos v4, and are unofficial.
+#
+klogin 543/tcp # Kerberos `rlogin'
+kshell 544/tcp krcmd # Kerberos `rsh'
+kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
+kerberos4 750/udp kdc # Kerberos (server) udp
+kerberos4 750/tcp kdc # Kerberos (server) tcp
+kerberos-master 751/udp # Kerberos admin server udp
+kerberos-master 751/tcp # Kerberos admin server tcp
+krbupdate 760/tcp kreg # BSD Kerberos registration
+kpasswd 761/tcp kpwd # BSD Kerberos `passwd'
+eklogin 2105/tcp # Kerberos encrypted `rlogin'
+#
+# Unofficial but necessary (for NetBSD) services
+#
+supfilesrv 871/tcp # SUP server
+supfiledbg 1127/tcp # SUP debugging
+#
+# AppleTalk DDP entries (DDP: Datagram Delivery Protocol)
+#
+rtmp 1/ddp # Routing Table Maintenance Protocol
+nbp 2/ddp # Name Binding Protocol
+echo 4/ddp # AppleTalk Echo Protocol
+zip 6/ddp # Zone Information Protocol
+
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 2005-12-24 20:29:42.067316648 +0000
@@ -0,0 +1,11 @@
+root::10933:0:99999:7:::
+bin:*:10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+adm:*:10933:0:99999:7:::
+lp:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+shutdown:*:10933:0:99999:7:::
+halt:*:10933:0:99999:7:::
+uucp:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 2005-12-24 20:29:42.071316040 +0000
@@ -0,0 +1 @@
+# module id=string
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 2005-12-24 20:29:42.071316040 +0000
@@ -0,0 +1 @@
+# ieee1394 module match_flags vendor_id model_id specifier_id version
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 2005-12-24 20:29:42.079314824 +0000
@@ -0,0 +1 @@
+# isapnp module cardvendor carddevice driver_data vendor function ...
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 2005-12-24 20:29:42.079314824 +0000
@@ -0,0 +1 @@
+# module pattern
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 2005-12-24 20:29:42.080314672 +0000
@@ -0,0 +1 @@
+# pci module vendor device subvendor subdevice class class_mask driver_data
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 2005-12-24 20:29:42.080314672 +0000
@@ -0,0 +1 @@
+# module id
diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap
--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 2005-12-24 20:29:42.080314672 +0000
@@ -0,0 +1 @@
+# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig differ
Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv differ
diff -urN linux-2.4.32/arch/mips/ar531x/README linux-2.4.32.new/arch/mips/ar531x/README
--- linux-2.4.32/arch/mips/ar531x/README 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/README 2005-12-24 20:29:42.101311480 +0000
@@ -0,0 +1,68 @@
+Basic information for the AR531X Board Support Package
+
+This directory contains the "LBSP" -- Linux Board Support Package --
+for Linux on the Atheros AR531X Wireless System-On-a-Chip. It is intended
+primarily as a building block for wireless products. At this time, the
+AR531X Linux BSP is experimental code, and is actively UNDER CONSTRUCTION.
+
+Some components that are supported by this LBSP along with a standard 2.4
+Linux MIPS kernel include
+ R4Kc CPU
+ instruction and data caches
+ SDRAM
+ flash (Macronix, AMD, STS, etc.)
+ 16550 serial port
+ ethernet MACs
+ ethernet PHY or PHY Switch (RealTek, Kendin, Marvell)
+ General-Purpose I/O pins
+ kernel debugging with kgdb
+
+This LBSP code does NOT include drivers for the wireless components of the
+chip/boards! Drivers for those components may be distributed separately.
+In particular, the MADWiFi project under SourceForge supports (not yet!)
+wireless functions on the AR531X chipset. See
+ http://www.sourceforge.net/projects/madwifi
+
+Files included in this BSP:
+ae531xlnx.c - Linux-specific portions of the ethernet driver
+ae531xmac.c - OS-independent AR531X ethernet MAC code
+ae531xmac.h - OS-independent AR531X ethernet MAC software definitions
+ae531xreg.h - OS-independent AR531X ethernet MAC hardware definitions
+ar531x.h - OS-independent AR531X system hardware definitions
+ar531xlnx.h - Linux-specific AR531X system definitions and externs
+defconfig-ar531x - Default Linux configuration file
+intr_recv.S - Linux interrupt "glue" code
+ar531xirq.c - Linux Interrupt Request management
+Makefile - Linux makefile
+mvPhy.c - OS-independent ethernet PHY code for Marvell Switch
+mvPhy.h - OS-independent ethernet PHY definitions for Marvell Switch
+ar531xprom.c - Linux prom "glue" code
+ar531xsetup.c - Linux startup code
+ar531xdbg_io.c - Support for kgdb-based debugging and for EARLY_PRINTK_HACK
+ar531xproc.c - Pseudo-device driver for /proc/ar531x device
+ar531xgpio.c - Support for General Purpose I/O pins
+ar531xwmacsl.c - Wireless MAC Support Layer
+
+Additional files, distributed with the BSP:
+README - This file
+README.BUILD - Instructions for building a linux kernel from source
+README.EXECUTE - Instructions for testing your linux kernel
+README.RAMDISK - Instructions for building a root ramdisk image
+
+ramdisk.gz - A binary ramdisk image, suitable for use with AR531X.
+DIFFS - Directory that contains "patch" files (See README.BUILD)
+
+
+There are several ways to boot a vmlinux image on an AR531X board:
+ -You can boot in over ethernet from the vxWorks bootrom, which is preloaded
+ on all Atheros boards
+ -You can use an ICE (e.g. VisionICE) to load the vmlinux image. You will
+ need appropriate register initialization (e.g. AP30.ini file)
+ -You can use the eCos RedBoot bootrom loader. This is a full-featured
+ bootrom which as been ported to AR531x. It can boot vmlinux over ethernet
+ or from flash. Source code is available from Atheros.
+
+Please send comments, corrections, complaints, criticisms, suggestions,
+enhancements, requests, or any other reasonable communications regarding
+this effort, to "linux@atheros.com". Your email will be received by a
+couple of engineers, and redirected as appropriate.
diff -urN linux-2.4.32/arch/mips/ar531x/README.BUILD linux-2.4.32.new/arch/mips/ar531x/README.BUILD
--- linux-2.4.32/arch/mips/ar531x/README.BUILD 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/README.BUILD 2005-12-24 20:29:42.101311480 +0000
@@ -0,0 +1,47 @@
+ How to BUILD a linux kernel for an AR531X system
+
+It is expected that you will build Linux on an existing Linux system, which
+has all of the standard Linux tools.
+
+01) Obtain a MIPS BigEndian ELF gcc-compatible toolchain. For example,
+ if you're cross-compiling on a x86 Linux system, you could use:
+ ftp://ftp.mips.com/pub/tools/software/sde-for-linux/sdelinux-5.01-4eb.i386.rpm
+
+02) Obtain the latest working MIPS Linux kernel
+ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs login (password "cvs")
+ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux
+
+ Now "cd linux". The remainder of these instructions assume
+ that you are in the linux directory.
+
+03) Place the contents of this directory at arch/mips/ar531x.
+
+04) Use the patch command to patch generic linux files according
+ to the DIFFS directory
+ for i in arch/mips/ar531x/DIFFS/*.diff
+ do
+ patch -p1 < $i
+ done
+ NOTE: This version of the AR531X Linux BSP was tested with
+ MIPS Linux 2.4.22 as of 11/14/03. If you use a different
+ (e.g. more recent) version of Linux source, you may need to
+ resolve some minor patch and compilation issues.
+
+05) Set up a RAMDISK image.
+ See the instructions in README.RAMDISK.
+
+06) Set up a linux configuration using ar531x/defconfig-ar531x.
+ cp arch/mips/ar531x/defconfig-ar531x .config
+ make oldconfig (answer all questions that are asked)
+ NOTE: For development/debug purposes, you may want to
+ enable CONFIG_RUNTIME_DEBUG and CONFIG_KGDB.
+
+07) Make dependencies.
+ make dep
+
+08) Build the linux kernel
+ make
+
+09) The linux image you just built is in vmlinux.
+ See instructions in README.EXECUTE to run your vmlinux
+ image on an AP531X-based board.
diff -urN linux-2.4.32/arch/mips/ar531x/README.EXECUTE linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE
--- linux-2.4.32/arch/mips/ar531x/README.EXECUTE 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE 2005-12-24 20:29:42.101311480 +0000
@@ -0,0 +1,23 @@
+ How to EXECUTE a linux image on an AR531X system
+
+There are currently three ways to run you vmlinux image:
+ 1) Load it using the vxWorks bootrom that is supplied with the board.
+ You can load it over ethernet or from the TFFS file system, if you
+ have sufficient flash to store the image.
+ 2) Load it using an ICE (e.g. VisionICE).
+ 3) Use a bootrom loader, such as eCos RedBoot.
+
+After you have booted linux:
+ By default, the root filesystem on ramdisk is read-only.
+ To make it writable, use "mount -o remount w /".
+
+ The user-level commands are slightly non-standard, as they
+ are based on "busybox".
+
+ The "wget" command is included. You can use wget to fetch
+ files from any ftp server. So, for instance, you can fetch
+ a kernel module and then "insmod" it.
+
+Note that the standard source-level kernel debugger, kgdb, works well
+over the serial line with this port. We use kgdb and the kgdb_demux perl
+script -- available over the www -- for debugging.
diff -urN linux-2.4.32/arch/mips/ar531x/README.VERSION linux-2.4.32.new/arch/mips/ar531x/README.VERSION
--- linux-2.4.32/arch/mips/ar531x/README.VERSION 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/arch/mips/ar531x/README.VERSION 2005-12-24 20:29:42.101311480 +0000
@@ -0,0 +1 @@
+Source release last modified: 12/16/03
diff -urN linux-2.4.32/arch/mips/config-shared.in linux-2.4.32.new/arch/mips/config-shared.in
--- linux-2.4.32/arch/mips/config-shared.in 2005-12-24 16:11:21.000000000 +0000
+++ linux-2.4.32.new/arch/mips/config-shared.in 2005-12-24 21:33:42.804435856 +0000
@@ -31,6 +31,7 @@
dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
+dep_bool 'Support for Atheros AR5312/AR2312 WiSoC (EXPERIMENTAL)' CONFIG_AR531X $CONFIG_AR531X $CONFIG_EXPERIMENTAL
dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32
dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
@@ -196,7 +197,7 @@
bool ' Support for ZBbus profiling' CONFIG_SIBYTE_TBPROF
if [ "$CONFIG_SIBYTE_SWARM" = "y" -o \
- "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \
+O5B "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \
"$CONFIG_SIBYTE_PTSWARM" = "y" -o \
"$CONFIG_SIBYTE_CARMEL" = "y" ]; then
define_bool CONFIG_SIBYTE_GENBUS_IDE y
@@ -239,6 +240,43 @@
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
+if [ "$CONFIG_AR531X" = "y" ]; then
+ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_CPU_VR4100 y
+ define_bool CONFIG_SERIAL y
+ define_bool CONFIG_NEW_IRQ y
+ define_bool CONFIG_NEW_TIME_C y
+ define_bool CONFIG_AR5312
+ define_bool CONFIG_NONCOHERENT_IO y
+ bool 'Enable early printk hack' CONFIG_EARLY_PRINTK_HACK
+ define_bool CONFIG_SCSI n
+ mainmenu_option next_comment
+ comment 'Board selection'
+ choice 'Board type' \
+ "UNKNOWN CONFIG_APUNKNOWN \
+ AP30 CONFIG_AP30 \
+ AP31 CONFIG_AP31 \
+ AP33 CONFIG_AP33 \
+ AP38 CONFIG_AP38 \
+ AP43 CONFIG_AP43 \
+ AP48 CONFIG_AP48" AP30
+ if [ "$CONFIG_AP30" = "y" ]; then
+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 2
+ fi
+ if [ "$CONFIG_AP33" = "y" ]; then
+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
+ fi
+ if [ "$CONFIG_AP38" = "y" ]; then
+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
+ fi
+ if [ "$CONFIG_AP43" = "y" ]; then
+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
+ fi
+ if [ "$CONFIG_AP48" = "y" ]; then
+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
+ fi
+ endmenu
+fi
if [ "$CONFIG_CASIO_E55" = "y" ]; then
define_bool CONFIG_IRQ_CPU y
define_bool CONFIG_NONCOHERENT_IO y
diff -urN linux-2.4.32/arch/mips/kernel/setup.c linux-2.4.32.new/arch/mips/kernel/setup.c
--- linux-2.4.32/arch/mips/kernel/setup.c 2005-12-24 16:08:53.000000000 +0000
+++ linux-2.4.32.new/arch/mips/kernel/setup.c 2005-12-24 21:28:51.779678344 +0000
@@ -494,6 +494,7 @@
void hp_setup(void);
void au1x00_setup(void);
void frame_info_init(void);
+ void ar531x_setup(void);
frame_info_init();
#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
@@ -691,6 +692,12 @@
pmc_yosemite_setup();
break;
#endif
+
+#ifdef CONFIG_AR531X
+ case MACH_GROUP_AR531X:
+ ar531x_setup();
+ break;
+#endif
default:
panic("Unsupported architecture");
}
diff -urN linux-2.4.32/arch/mips/Makefile linux-2.4.32.new/arch/mips/Makefile
--- linux-2.4.32/arch/mips/Makefile 2005-12-24 16:09:51.000000000 +0000
+++ linux-2.4.32.new/arch/mips/Makefile 2005-12-24 21:28:51.780678192 +0000
@@ -725,6 +725,12 @@
LOADADDR += 0x80020000
endif
+ifdef CONFIG_AR531X
+SUBDIRS += arch/mips/ar531x
+LIBS += arch/mips/ar531x/ar531x.o
+LOADADDR += 0x80002000
+endif
+
#
# Choosing incompatible machines durings configuration will result in
# error messages during linking. Select a default linkscript if
diff -urN linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c
--- linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 11:54:21.000000000 +0000
+++ linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c 2005-12-24 21:28:51.795675912 +0000
@@ -510,7 +510,7 @@
or tells us why it failed. */
dq6 = CMD(1<<6);
dq5 = CMD(1<<5);
- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
+ timeo = jiffies + (HZ/1000) + 1; /* setting timeout to 1ms for now */
oldstatus = cfi_read(map, adr);
status = cfi_read(map, adr);
@@ -535,12 +535,14 @@
if( (status & dq5) == dq5 ) {
/* When DQ5 raises, we must check once again
if DQ6 is toggling. If not, the erase has been
- completed OK. If not, reset chip. */
+ completed OK. But if so, reset chip. */
oldstatus = cfi_read(map, adr);
status = cfi_read(map, adr);
if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
+#if 0
printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
+#endif
} else {
/* DQ5 is active so we can do a reset and stop the erase */
cfi_write(map, CMD(0xF0), chip->start);
diff -urN linux-2.4.32/drivers/mtd/chips/jedec_probe.c linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c
--- linux-2.4.32/drivers/mtd/chips/jedec_probe.c 2003-06-13 15:51:34.000000000 +0100
+++ linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c 2005-12-24 21:28:51.797675608 +0000
@@ -900,7 +900,16 @@
NumEraseRegions: 1,
regions: {ERASEINFO(0x01000,256),
}
- }
+ }, {
+ mfr_id: MANUFACTURER_SST,
+ dev_id: SST39LF160,
+ name: "SST 39LF160",
+ DevSize: SIZE_2MiB,
+ CmdSet: P_ID_AMD_STD,
+ NumEraseRegions: 1,
+ regions: {ERASEINFO(0x01000,512),
+ }
+ }
};
diff -urN linux-2.4.32/drivers/mtd/Config.in linux-2.4.32.new/drivers/mtd/Config.in
--- linux-2.4.32/drivers/mtd/Config.in 2003-06-13 15:51:34.000000000 +0100
+++ linux-2.4.32.new/drivers/mtd/Config.in 2005-12-24 21:28:51.803674696 +0000
@@ -14,6 +14,9 @@
dep_tristate ' MTD partitioning support' CONFIG_MTD_PARTITIONS $CONFIG_MTD
dep_tristate ' MTD concatenating support' CONFIG_MTD_CONCAT $CONFIG_MTD
dep_tristate ' RedBoot partition table parsing' CONFIG_MTD_REDBOOT_PARTS $CONFIG_MTD_PARTITIONS
+ if [ "$CONFIG_MTD_END_RESERVED" != "" ]; then
+ define_int CONFIG_MTD_END_RESERVED $CONFIG_MTD_END_RESERVED
+ fi
dep_tristate ' Command line partition table parsing' CONFIG_MTD_CMDLINE_PARTS $CONFIG_MTD_PARTITIONS
if [ "$CONFIG_ARM" = "y" ]; then
dep_tristate ' ARM Firmware Suite partition parsing' CONFIG_MTD_AFS_PARTS $CONFIG_MTD_PARTITIONS
diff -urN linux-2.4.32/drivers/mtd/maps/physmap.c linux-2.4.32.new/drivers/mtd/maps/physmap.c
--- linux-2.4.32/drivers/mtd/maps/physmap.c 2003-06-13 15:51:34.000000000 +0100
+++ linux-2.4.32.new/drivers/mtd/maps/physmap.c 2005-12-24 21:28:51.811673480 +0000
@@ -80,12 +80,18 @@
};
#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
+#if defined(CONFIG_MTD_CMDLINE_PARTS) || defined(CONFIG_MTD_REDBOOT_PARTS)
static struct mtd_partition *mtd_parts = 0;
static int mtd_parts_nb = 0;
#else
static struct mtd_partition physmap_partitions[] = {
/* Put your own partition definitions here */
+ {
+ name: "rootfs",
+ size: 0x000e0000,
+ offset: 0x000f0000,
+ /* Allow file system to be mounted for writing */
+ }
#if 0
{
name: "bootROM",
@@ -138,6 +144,22 @@
add_mtd_device(mymtd);
#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+ {
+ extern int parse_redboot_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts);
+
+ struct mtd_partition *rb_parts = 0;
+ int rb_parts_nb = 0;
+
+ rb_parts_nb = parse_redboot_partitions(mymtd, &rb_parts);
+ if (rb_parts_nb > 0) {
+ printk(KERN_NOTICE
+ "Using redboot flash partitioning");
+ add_mtd_partitions (mymtd, rb_parts, rb_parts_nb);
+ }
+ }
+#endif
#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd_parts_nb = parse_cmdline_partitions(mymtd, &mtd_parts,
"phys");
@@ -147,7 +169,8 @@
"Using command line partition definition\n");
add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb);
}
-#else
+#endif
+#if !defined(CONFIG_MTD_CMDLINE_PARTS) && !defined(CONFIG_MTD_REDBOOT_PARTS)
if (NUM_PARTITIONS != 0)
{
printk(KERN_NOTICE
diff -urN linux-2.4.32/drivers/mtd/redboot.c linux-2.4.32.new/drivers/mtd/redboot.c
--- linux-2.4.32/drivers/mtd/redboot.c 2001-11-09 22:01:22.000000000 +0000
+++ linux-2.4.32.new/drivers/mtd/redboot.c 2005-12-24 21:28:51.821671960 +0000
@@ -51,8 +51,14 @@
return -ENOMEM;
/* Read the start of the last erase block */
- ret = master->read(master, master->size - master->erasesize,
+ {
+ u_int32_t part_table_start = master->size - master->erasesize;
+#if defined(CONFIG_MTD_END_RESERVED)
+ part_table_start -= CONFIG_MTD_END_RESERVED;
+#endif
+ ret = master->read(master, part_table_start,
PAGE_SIZE, &retlen, (void *)buf);
+ }
if (ret)
goto out;
diff -urN linux-2.4.32/drivers/net/Config.in linux-2.4.32.new/drivers/net/Config.in
--- linux-2.4.32/drivers/net/Config.in 2005-12-24 16:16:53.000000000 +0000
+++ linux-2.4.32.new/drivers/net/Config.in 2005-12-24 21:28:51.856666640 +0000
@@ -30,6 +30,8 @@
comment 'Ethernet (10 or 100Mbit)'
bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
+ define_bool CONFIG_VENETDEV n
+ define_bool CONFIG_MARVELL_ENET_PHY y
if [ "$CONFIG_ARM" = "y" ]; then
dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
tristate ' Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
diff -urN linux-2.4.32/drivers/net/wireless/Config.in linux-2.4.32.new/drivers/net/wireless/Config.in
--- linux-2.4.32/drivers/net/wireless/Config.in 2004-11-17 11:54:21.000000000 +0000
+++ linux-2.4.32.new/drivers/net/wireless/Config.in 2005-12-24 21:28:51.898660256 +0000
@@ -38,7 +38,8 @@
# yes, this works even when no drivers are selected
if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" -o \
- "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" ]; then
+ "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" -o \
+ "$CONFIG_NET_WIRELESS" = "y" ]; then
define_bool CONFIG_NET_WIRELESS y
else
define_bool CONFIG_NET_WIRELESS n
diff -urN linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h
--- linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h 2005-12-24 20:29:06.898663096 +0000
@@ -0,0 +1,16 @@
+#ifndef __ASM_ATHEROS_BSP_SUPPORT_H
+#define __ASM_ATHEROS_BSP_SUPPORT_H
+/*
+ * These are definitions and functions provided by the bsp to support the
+ * AR5312 WiSoC running LSDK. For different BSP implementations, different
+ * BSP functions will be needed.
+ */
+
+extern unsigned int ar531x_sys_frequency(void);
+
+#ifdef CONFIG_KGDB
+extern void kgdbInit(void);
+extern int kgdbEnabled(void);
+#endif
+
+#endif /* __ASM_ATHEROS_BSP_SUPPORT_H */
diff -urN linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32.new/include/asm-mips/bootinfo.h
--- linux-2.4.32/include/asm-mips/bootinfo.h 2005-12-24 16:08:53.000000000 +0000
+++ linux-2.4.32.new/include/asm-mips/bootinfo.h 2005-12-24 21:28:51.899660104 +0000
@@ -37,6 +37,7 @@
#define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */
#define MACH_GROUP_LASAT 21
#define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
+#define MACH_GROUP_AR531X 23 /* Atheros AR531X */
/*
* Valid machtype values for group unknown (low order halfword of mips_machtype)
@@ -201,6 +202,17 @@
*/
#define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+/*
+ * Valid machtype for group MACH_GROUP_AR5312
+ */
+#define MACH_ATHEROS_UNUSED 0
+#define MACH_ATHEROS_AP30 1 /* AP30 */
+#define MACH_ATHEROS_AP33 2 /* AP33 */
+#define MACH_ATHEROS_AP38 3 /* AP38 */
+#define MACH_ATHEROS_AP43 4 /* AP43 */
+#define MACH_ATHEROS_AP48 5 /* AP48 */
+#define MACH_ATHEROS_PB32 6 /* PB32 */
+
#define CL_SIZE (256)
const char *get_system_type(void);
diff -urN linux-2.4.32/include/asm-mips/serial.h linux-2.4.32.new/include/asm-mips/serial.h
--- linux-2.4.32/include/asm-mips/serial.h 2005-01-19 14:10:12.000000000 +0000
+++ linux-2.4.32.new/include/asm-mips/serial.h 2005-12-24 21:28:51.901659800 +0000
@@ -467,6 +467,11 @@
#define DDB5477_SERIAL_PORT_DEFNS
#endif
+#if defined(CONFIG_AR531X)
+#undef RS_TABLE_SIZE
+#define RS_TABLE_SIZE 1
+#endif
+
#define SERIAL_PORT_DFNS \
ATLAS_SERIAL_PORT_DEFNS \
AU1000_SERIAL_PORT_DEFNS \
diff -urN linux-2.4.32/kernel/printk.c linux-2.4.32.new/kernel/printk.c
--- linux-2.4.32/kernel/printk.c 2004-11-17 11:54:22.000000000 +0000
+++ linux-2.4.32.new/kernel/printk.c 2005-12-24 21:28:51.929655544 +0000
@@ -384,6 +384,18 @@
_call_console_drivers(start_print, end, msg_level);
}
+#if CONFIG_EARLY_PRINTK_HACK
+void putDebugChar(char byte);
+static void emit_log_char(char c)
+{
+ if (c == '\n') {
+ putDebugChar('\r');
+ putDebugChar('\n');
+ } else {
+ putDebugChar(c);
+ }
+}
+#else
static void emit_log_char(char c)
{
LOG_BUF(log_end) = c;
@@ -395,6 +407,7 @@
if (logged_chars < LOG_BUF_LEN)
logged_chars++;
}
+#endif
/*
* This is printk. It can be called from any context. We want it to work.
@@ -700,3 +713,4 @@
tty->driver.write(tty, 0, msg, strlen(msg));
return;
}
+
Copy Permalink