qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 14:39:33 +02:00
Code
0ccb4cc6a9
openwrt-xburst/target/linux/x86/net5501/target.mk

36 lines
1.2 KiB
Makefile
Raw Normal View History

[x86] alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 21:00:40 +02:00
LINUX_VERSION:=3.2.2
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
BOARDNAME:=Soekris net5501
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
FEATURES:=squashfs jffs2 ext4 pci usb gpio
DEFAULT_PACKAGES += kmod-crypto-hw-geode kmod-crypto-ocf \
kmod-gpio-cs5535-new kmod-gpio-nsc \
kmod-wdt-geode kmod-cs5535-clockevt kmod-cs5535-mfgpt \
kmod-cs5536 \
kmod-hwmon-core kmod-hwmon-pc87360 kmod-gpio-pc8736x \
kmod-via-rhine kmod-solos-pci \
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
kmod-i2c-core kmod-i2c-gpio \
kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
kmod-i2c-scx200-acb \
kmod-usb-core kmod-usb2 kmod-usb-ohci \
kmod-cfg80211 kmod-mac80211 \
kmod-mppe kmod-pppoe kmod-pppoa kmod-pppo2ltp \
kmod-ath kmod-ath5k kmod-ath9k \
kmod-leds-gpio kmod-input-gpio-keys-polled \
[PATCHv2 1/1] net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 20:14:02 +02:00
kmod-button-hotplug \
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
[x86] alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 21:11:52 +02:00
kmod-ledtrig-netdev \
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
kmod-cpu-msr \
[x86] alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 21:06:22 +02:00
hwclock wpad
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
CS5535_MASK:=0x01000040
[x86] Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms Makes the builds run slightly faster on multicores. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 15:42:06 +03:00
[x86] net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 16:19:29 +02:00
CFLAGS += -march=geode -Os -mmmx -m3dnow -fno-align-jumps -fno-align-functions \
-fno-align-labels -fno-align-loops -pipe -fomit-frame-pointer
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
define Target/Description
Build firmware images for Soekris net5501 board
endef
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
define KernelPackage/gpio-cs5535-new/install
sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535-new
endef
Copy Permalink