qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 20:48:14 +02:00
Code
2126431b18
openwrt-xburst/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch

166 lines
5.6 KiB
Diff
Raw Normal View History

changed Makefile and profiles, added patches for kernel 2.6.24 (stable-branch of Openmoko) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 13:58:53 +02:00
From eee43706c5969f5d99096dddefae3be0c41a6ed2 Mon Sep 17 00:00:00 2001
From: Harald Welte <laforge@gnumonks.org>
Date: Thu, 13 Nov 2008 08:29:11 +0000
Subject: [PATCH] [ARM] S3C24xx: Add preliminary E-TEN glofiish M800 support
This patch adds preliminary support for the M800. If booted
through haret, the system has the following working components:
* NAND read support
* framebuffer / LCM (no jbt6k74 power management yet)
* USB device controller (incl. Pullup)
* microSD card (incl. card-detect)
* backlight brightness control (using gta01-bl.c)
* input event device for power, camera and record button
* input event device for keyboard slide event
* bluetooth power control (using gta01-pm-bt)
Many things are still missing, like
* NAND write support
* GPS power control
* GSM/3G modem interface
* capsense buttons, joystick and querty-keyboard
* camera
* audio
Signed-off-by: Harald Welte <laforge@gnumonks.org>
---
arch/arm/mach-s3c2440/Kconfig | 7 +++++++
arch/arm/mach-s3c2440/Makefile | 1 +
arch/arm/plat-s3c24xx/neo1973_pm_bt.c | 17 +++++++++++++++++
arch/arm/tools/mach-types | 1 +
drivers/input/keyboard/Kconfig | 11 +++++++++++
drivers/input/keyboard/Makefile | 1 +
drivers/mtd/nand/nand_bbt.c | 2 ++
7 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 4a211d8..4c3b6b2 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -98,6 +98,13 @@ config NEO1973_GTA02_2440
Say Y here if you are using an early hardware revision
of the FIC/Openmoko Neo1973 GTA02 GSM Phone.
+config MACH_M800
+ bool "E-TEN glofiish M800/X800"
+ select CPU_S3C2442
+ help
+ Say Y here if you are using the E-TEN glofiish M800/X800.
+
+
endmenu
#source "arch/arm/mach-s3c2440/camera/Kconfig"
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index e3ca9e3..8617820 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_M800) += mach-glofiish.o
diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
index dfc9ae8..dcb251b 100644
--- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
+++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
@@ -30,6 +30,9 @@
#include <linux/pcf50633.h>
#endif
+#ifdef CONFIG_MACH_M800
+#include <asm/arch/glofiish.h>
+#endif
#define DRVMSG "FIC Neo1973 Bluetooth Power Management"
@@ -56,6 +59,14 @@ static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
break;
#endif /* CONFIG_MACH_NEO1973_GTA02 */
+#ifdef CONFIG_MACH_M800
+ case MACH_TYPE_M800:
+ if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) &&
+ s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2))
+ goto out_1;
+ break;
+#endif /* CONFIG_MACH_M800 */
+
}
} else if (!strcmp(attr->attr.name, "reset")) {
switch (machine_arch_type) {
@@ -121,6 +132,12 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
break;
#endif /* CONFIG_MACH_NEO1973_GTA02 */
+#ifdef CONFIG_MACH_M800
+ case MACH_TYPE_M800:
+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on);
+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on);
+ break;
+#endif /* CONFIG_MACH_M800 */
}
} else if (!strcmp(attr->attr.name, "reset")) {
/* reset is low-active, so we need to invert */
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0a9a5e7..2578091 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358
csb726 MACH_CSB726 CSB726 1359
tik27 MACH_TIK27 TIK27 1360
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
+m800 MACH_M800 M800 1772
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a61ca45..68a893f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -304,6 +304,17 @@ config KEYBOARD_NEO1973
To compile this driver as a module, choose M here: the
module will be called neo1973kbd.
+config KEYBOARD_M800
+ tristate "E-TEN glofiish M800 buttons"
+ depends on MACH_M800
+ default y
+ help
+ Say Y here to enable the buttons on the E-TEN glofiish
+ M800 GSM phone.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m800kbd.
+
config KEYBOARD_QT2410
tristate "QT2410 buttons"
depends on MACH_QT2410
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 34bfc33..005a050 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
obj-$(CONFIG_KEYBOARD_NEO1973) += neo1973kbd.o
+obj-$(CONFIG_KEYBOARD_M800) += m800kbd.o
obj-$(CONFIG_KEYBOARD_QT2410) += qt2410kbd.o
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ce..7e20816 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+#if 0
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int)from);
+#endif
mtd->ecc_stats.badblocks++;
}
--
1.5.6.5
Copy Permalink