mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-27 07:40:50 +02:00
44 lines
1.4 KiB
Diff
44 lines
1.4 KiB
Diff
|
--- a/drivers/mmc/host/atmel-mci.c
|
||
|
|
+++ b/drivers/mmc/host/atmel-mci.c
|
||
|
|
@@ -77,6 +77,7 @@ struct atmel_mci {
|
||
|
|
struct clk *mck;
|
||
|
|
struct platform_device *pdev;
|
||
|
|
|
||
|
|
+ int pending_stop;
|
||
|
|
#ifdef CONFIG_DEBUG_FS
|
||
|
|
struct dentry *debugfs_root;
|
||
|
|
struct dentry *debugfs_regs;
|
||
|
|
@@ -866,6 +867,12 @@ static void atmci_tasklet_func(unsigned long priv)
|
||
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
||
|
|
atmci_data_complete(host, data);
|
||
|
|
}
|
||
|
|
+ /* See if there is a pending STOP which can be sent */
|
||
|
|
+ if (host->pending_stop && mci_cmd_is_complete(host)) {
|
||
|
|
+ host->pending_stop = 0;
|
||
|
|
+ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
|
||
|
|
+ send_stop_cmd(host->mmc, mrq->data, 0);
|
||
|
|
+ }
|
||
|
|
}
|
||
|
|
|
||
|
|
static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
|
||
|
|
@@ -918,9 +925,16 @@ static void atmci_xfer_complete(struct dma_request *_req)
|
||
|
|
* drivers) or when interrupts are disabled for a long time.
|
||
|
|
*/
|
||
|
|
mci_set_dma_complete(host);
|
||
|
|
- if (data->stop && mci_cmd_is_complete(host)
|
||
|
|
- && !mci_set_stop_sent_is_completed(host))
|
||
|
|
- send_stop_cmd(host->mmc, data, 0);
|
||
|
|
+
|
||
|
|
+ if (data->stop) {
|
||
|
|
+ if (!mci_cmd_is_complete(host)) {
|
||
|
|
+ /* Just remember a STOP must be sent */
|
||
|
|
+ host->pending_stop = 1;
|
||
|
|
+ } else if (!mci_set_stop_sent_is_completed(host)) {
|
||
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
||
|
|
+ host->pending_stop = 0;
|
||
|
|
+ }
|
||
|
|
+ }
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Regardless of what the documentation says, we have to wait
|