openwrt-xburst/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch

diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:03:34.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:22:41.000000000 +0200
@@ -65,6 +65,14 @@
 	  Engineering Pronghorn Metro Platform. For more
 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_COMPEX
+	bool "Compex WP18 / NP18A"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Compex' 
+	  WP18 or NP18A boards. For more information on this
+	  platform, see http://openwrt.org
+
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:03:34.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:22:41.000000000 +0200
@@ -17,6 +17,7 @@
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
 
 obj-y	+= common.o
 
@@ -32,6 +33,7 @@
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:22:41.000000000 +0200
@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-ixp4xx/compex-setup.c
+ *
+ * Ccompex WP18 / NP18A board-setup
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data compex_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource compex_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device compex_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &compex_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &compex_flash_resource,
+};
+
+static struct resource compex_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port compex_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device compex_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= compex_uart_data,
+	.num_resources		= 2,
+	.resource		= compex_uart_resources,
+};
+
+static struct platform_device *compex_devices[] __initdata = {
+	&compex_flash,
+	&compex_uart
+};
+
+static void __init compex_init(void)
+{
+	ixp4xx_sys_init();
+
+	compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	compex_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
+}
+
+#ifdef CONFIG_MACH_COMPEX
+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= compex_init,
+MACHINE_END
+#endif
diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
--- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-23 18:22:41.000000000 +0200
@@ -66,7 +66,7 @@
 int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_ixdp465() || machine_is_kixrp435())
+			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }
diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types
--- linux-2.6.23/arch/arm/tools/mach-types	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/tools/mach-types	2007-10-23 18:22:41.000000000 +0200
@@ -1278,7 +1278,7 @@
 smdk6400		MACH_SMDK6400		SMDK6400		1270
 nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
 greenphone		MACH_GREENPHONE		GREENPHONE		1272
-compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
+compex			MACH_COMPEX		COMPEX			1273
 xmate			MACH_XMATE		XMATE			1274
 energizer		MACH_ENERGIZER		ENERGIZER		1275
 ime1			MACH_IME1		IME1			1276