openwrt-xburst/target/linux/ar71xx/base-files/etc/defconfig/tl-wr741nd/network

config interface loopback
	option ifname	lo
	option proto	static
	option ipaddr	127.0.0.1
	option netmask	255.0.0.0

config interface lan
	option ifname	eth0
	option type	bridge
	option proto	static
	option ipaddr	192.168.1.1
	option netmask	255.255.255.0

config interface wan
	option ifname	eth1
	option proto	dhcp

config switch eth0
	option enable_vlan	1

config switch_vlan
	option device	eth0
	option vlan	1
	option ports	"0 1 2 3 4"
ar71xx: add default network configuration file for the TL-WR741ND board git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-03-01 09:34:48 +02:00			`config interface loopback`
			`option ifname lo`
			`option proto static`
			`option ipaddr 127.0.0.1`
			`option netmask 255.0.0.0`

			`config interface lan`
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-08-16 22:21:57 +03:00			`option ifname eth0`
ar71xx: add default network configuration file for the TL-WR741ND board git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-03-01 09:34:48 +02:00			`option type bridge`
			`option proto static`
			`option ipaddr 192.168.1.1`
			`option netmask 255.255.255.0`

			`config interface wan`
			`option ifname eth1`
			`option proto dhcp`
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-08-16 22:21:57 +03:00
			`config switch eth0`
			`option enable_vlan 1`

			`config switch_vlan`
			`option device eth0`
			`option vlan 1`
			`option ports "0 1 2 3 4"`