1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 22:15:20 +02:00
openwrt-xburst/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c

913 lines
27 KiB
C
Raw Normal View History

/*
*
* bcm47xx pcmcia driver
*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* Based on sa1100_generic.c from www.handhelds.org,
* and au1000_generic.c from oss.sgi.com.
*
* $Id$
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/tqueue.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
#include <pcmcia/bulkmem.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/bus_ops.h>
#include "cs_internal.h"
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <typedefs.h>
#include <bcm4710.h>
#include <sbextif.h>
#include "bcm4710pcmcia.h"
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
#endif
MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller");
/* This structure maintains housekeeping state for each socket, such
* as the last known values of the card detect pins, or the Card Services
* callback value associated with the socket:
*/
static struct bcm47xx_pcmcia_socket *pcmcia_socket;
static int socket_count;
/* Returned by the low-level PCMCIA interface: */
static struct pcmcia_low_level *pcmcia_low_level;
/* Event poll timer structure */
static struct timer_list poll_timer;
/* Prototypes for routines which are used internally: */
static int bcm47xx_pcmcia_driver_init(void);
static void bcm47xx_pcmcia_driver_shutdown(void);
static void bcm47xx_pcmcia_task_handler(void *data);
static void bcm47xx_pcmcia_poll_event(unsigned long data);
static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs);
static struct tq_struct bcm47xx_pcmcia_task;
#ifdef CONFIG_PROC_FS
static int bcm47xx_pcmcia_proc_status(char *buf, char **start,
off_t pos, int count, int *eof, void *data);
#endif
/* Prototypes for operations which are exported to the
* in-kernel PCMCIA core:
*/
static int bcm47xx_pcmcia_init(unsigned int sock);
static int bcm47xx_pcmcia_suspend(unsigned int sock);
static int bcm47xx_pcmcia_register_callback(unsigned int sock,
void (*handler)(void *, unsigned int), void *info);
static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap);
static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value);
static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state);
static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state);
static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io);
static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io);
static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem);
static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem);
#ifdef CONFIG_PROC_FS
static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base);
#endif
static struct pccard_operations bcm47xx_pcmcia_operations = {
bcm47xx_pcmcia_init,
bcm47xx_pcmcia_suspend,
bcm47xx_pcmcia_register_callback,
bcm47xx_pcmcia_inquire_socket,
bcm47xx_pcmcia_get_status,
bcm47xx_pcmcia_get_socket,
bcm47xx_pcmcia_set_socket,
bcm47xx_pcmcia_get_io_map,
bcm47xx_pcmcia_set_io_map,
bcm47xx_pcmcia_get_mem_map,
bcm47xx_pcmcia_set_mem_map,
#ifdef CONFIG_PROC_FS
bcm47xx_pcmcia_proc_setup
#endif
};
/*
* bcm47xx_pcmcia_driver_init()
*
* This routine performs a basic sanity check to ensure that this
* kernel has been built with the appropriate board-specific low-level
* PCMCIA support, performs low-level PCMCIA initialization, registers
* this socket driver with Card Services, and then spawns the daemon
* thread which is the real workhorse of the socket driver.
*
* Please see linux/Documentation/arm/SA1100/PCMCIA for more information
* on the low-level kernel interface.
*
* Returns: 0 on success, -1 on error
*/
static int __init bcm47xx_pcmcia_driver_init(void)
{
servinfo_t info;
struct pcmcia_init pcmcia_init;
struct pcmcia_state state;
unsigned int i;
unsigned long tmp;
printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE);
CardServices(GetCardServicesInfo, &info);
if (info.Revision != CS_RELEASE_CODE) {
printk(KERN_ERR "Card Services release codes do not match\n");
return -1;
}
#ifdef CONFIG_BCM4710
pcmcia_low_level=&bcm4710_pcmcia_ops;
#else
#error Unsupported Broadcom BCM47XX board.
#endif
pcmcia_init.handler=bcm47xx_pcmcia_interrupt;
if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) {
printk(KERN_ERR "Unable to initialize PCMCIA service.\n");
return -EIO;
} else {
printk("\t%d PCMCIA sockets initialized.\n", socket_count);
}
pcmcia_socket =
kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count,
GFP_KERNEL);
memset(pcmcia_socket, 0,
sizeof(struct bcm47xx_pcmcia_socket) * socket_count);
if (!pcmcia_socket) {
printk(KERN_ERR "Card Services can't get memory \n");
return -1;
}
for (i = 0; i < socket_count; i++) {
if (pcmcia_low_level->socket_state(i, &state) < 0) {
printk(KERN_ERR "Unable to get PCMCIA status\n");
return -EIO;
}
pcmcia_socket[i].k_state = state;
pcmcia_socket[i].cs_state.csc_mask = SS_DETECT;
if (i == 0) {
pcmcia_socket[i].virt_io =
(unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000);
/* Substract ioport base which gets added by in/out */
pcmcia_socket[i].virt_io -= mips_io_port_base;
pcmcia_socket[i].phys_attr =
(unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF);
pcmcia_socket[i].phys_mem =
(unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF);
} else {
printk(KERN_ERR "bcm4710: socket 1 not supported\n");
return 1;
}
}
/* Only advertise as many sockets as we can detect: */
if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) {
printk(KERN_ERR "Unable to register socket service routine\n");
return -ENXIO;
}
/* Start the event poll timer.
* It will reschedule by itself afterwards.
*/
bcm47xx_pcmcia_poll_event(0);
DEBUG(1, "bcm4710: initialization complete\n");
return 0;
}
module_init(bcm47xx_pcmcia_driver_init);
/*
* bcm47xx_pcmcia_driver_shutdown()
*
* Invokes the low-level kernel service to free IRQs associated with this
* socket controller and reset GPIO edge detection.
*/
static void __exit bcm47xx_pcmcia_driver_shutdown(void)
{
int i;
del_timer_sync(&poll_timer);
unregister_ss_entry(&bcm47xx_pcmcia_operations);
pcmcia_low_level->shutdown();
flush_scheduled_tasks();
for (i = 0; i < socket_count; i++) {
if (pcmcia_socket[i].virt_io)
iounmap((void *)pcmcia_socket[i].virt_io);
if (pcmcia_socket[i].phys_attr)
iounmap((void *)pcmcia_socket[i].phys_attr);
if (pcmcia_socket[i].phys_mem)
iounmap((void *)pcmcia_socket[i].phys_mem);
}
DEBUG(1, "bcm4710: shutdown complete\n");
}
module_exit(bcm47xx_pcmcia_driver_shutdown);
/*
* bcm47xx_pcmcia_init()
* We perform all of the interesting initialization tasks in
* bcm47xx_pcmcia_driver_init().
*
* Returns: 0
*/
static int bcm47xx_pcmcia_init(unsigned int sock)
{
DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock);
return 0;
}
/*
* bcm47xx_pcmcia_suspend()
*
* We don't currently perform any actions on a suspend.
*
* Returns: 0
*/
static int bcm47xx_pcmcia_suspend(unsigned int sock)
{
DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock);
return 0;
}
/*
* bcm47xx_pcmcia_events()
*
* Helper routine to generate a Card Services event mask based on
* state information obtained from the kernel low-level PCMCIA layer
* in a recent (and previous) sampling. Updates `prev_state'.
*
* Returns: an event mask for the given socket state.
*/
static inline unsigned
bcm47xx_pcmcia_events(struct pcmcia_state *state,
struct pcmcia_state *prev_state,
unsigned int mask, unsigned int flags)
{
unsigned int events=0;
if (state->bvd1 != prev_state->bvd1) {
DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1);
events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD;
}
if (state->bvd2 != prev_state->bvd2) {
DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2);
events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN;
}
if (state->detect != prev_state->detect) {
DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect);
events |= mask & SS_DETECT;
}
if (state->ready != prev_state->ready) {
DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready);
events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY);
}
if (events != 0) {
DEBUG(2, "events: %s%s%s%s%s\n",
(events & SS_DETECT) ? "DETECT " : "",
(events & SS_READY) ? "READY " : "",
(events & SS_BATDEAD) ? "BATDEAD " : "",
(events & SS_BATWARN) ? "BATWARN " : "",
(events & SS_STSCHG) ? "STSCHG " : "");
}
*prev_state=*state;
return events;
}
/*
* bcm47xx_pcmcia_task_handler()
*
* Processes serviceable socket events using the "eventd" thread context.
*
* Event processing (specifically, the invocation of the Card Services event
* callback) occurs in this thread rather than in the actual interrupt
* handler due to the use of scheduling operations in the PCMCIA core.
*/
static void bcm47xx_pcmcia_task_handler(void *data)
{
struct pcmcia_state state;
int i, events, irq_status;
DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__);
for (i = 0; i < socket_count; i++) {
if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0)
printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n");
events = bcm47xx_pcmcia_events(&state,
&pcmcia_socket[i].k_state,
pcmcia_socket[i].cs_state.csc_mask,
pcmcia_socket[i].cs_state.flags);
if (pcmcia_socket[i].handler != NULL) {
pcmcia_socket[i].handler(pcmcia_socket[i].handler_info,
events);
}
}
}
static struct tq_struct bcm47xx_pcmcia_task = {
routine: bcm47xx_pcmcia_task_handler
};
/*
* bcm47xx_pcmcia_poll_event()
*
* Let's poll for events in addition to IRQs since IRQ only is unreliable...
*/
static void bcm47xx_pcmcia_poll_event(unsigned long dummy)
{
DEBUG(4, "%s(): polling for events\n", __FUNCTION__);
poll_timer.function = bcm47xx_pcmcia_poll_event;
poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD;
add_timer(&poll_timer);
schedule_task(&bcm47xx_pcmcia_task);
}
/*
* bcm47xx_pcmcia_interrupt()
*
* Service routine for socket driver interrupts (requested by the
* low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()).
*
* The actual interrupt-servicing work is performed by
* bcm47xx_pcmcia_task(), largely because the Card Services event-
* handling code performs scheduling operations which cannot be
* executed from within an interrupt context.
*/
static void
bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs)
{
DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq);
schedule_task(&bcm47xx_pcmcia_task);
}
/*
* bcm47xx_pcmcia_register_callback()
*
* Implements the register_callback() operation for the in-kernel
* PCMCIA service (formerly SS_RegisterCallback in Card Services). If
* the function pointer `handler' is not NULL, remember the callback
* location in the state for `sock', and increment the usage counter
* for the driver module. (The callback is invoked from the interrupt
* service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services
* of interesting events.) Otherwise, clear the callback pointer in the
* socket state and decrement the module usage count.
*
* Returns: 0
*/
static int
bcm47xx_pcmcia_register_callback(unsigned int sock,
void (*handler)(void *, unsigned int), void *info)
{
if (handler == NULL) {
pcmcia_socket[sock].handler = NULL;
MOD_DEC_USE_COUNT;
} else {
MOD_INC_USE_COUNT;
pcmcia_socket[sock].handler = handler;
pcmcia_socket[sock].handler_info = info;
}
return 0;
}
/*
* bcm47xx_pcmcia_inquire_socket()
*
* Implements the inquire_socket() operation for the in-kernel PCMCIA
* service (formerly SS_InquireSocket in Card Services). Of note is
* the setting of the SS_CAP_PAGE_REGS bit in the `features' field of
* `cap' to "trick" Card Services into tolerating large "I/O memory"
* addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory
* resource database check. (Mapped memory is set up within the socket
* driver itself.)
*
* In conjunction with the STATIC_MAP capability is a new field,
* `io_offset', recommended by David Hinds. Rather than go through
* the SetIOMap interface (which is not quite suited for communicating
* window locations up from the socket driver), we just pass up
* an offset which is applied to client-requested base I/O addresses
* in alloc_io_space().
*
* Returns: 0 on success, -1 if no pin has been configured for `sock'
*/
static int
bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap)
{
struct pcmcia_irq_info irq_info;
if (sock >= socket_count) {
printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock);
return -1;
}
/* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the
* force_low argument to validate_mem() in rsrc_mgr.c -- since in
* general, the mapped * addresses of the PCMCIA memory regions
* will not be within 0xffff, setting force_low would be
* undesirable.
*
* SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory
* resource database; we instead pass up physical address ranges
* and allow other parts of Card Services to deal with remapping.
*
* SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but
* not 32-bit CardBus devices.
*/
cap->features = (SS_CAP_PAGE_REGS | SS_CAP_STATIC_MAP | SS_CAP_PCCARD);
irq_info.sock = sock;
irq_info.irq = -1;
if (pcmcia_low_level->get_irq_info(&irq_info) < 0) {
printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock);
return -1;
}
cap->irq_mask = 0;
cap->map_size = PAGE_SIZE;
cap->pci_irq = irq_info.irq;
cap->io_offset = pcmcia_socket[sock].virt_io;
return 0;
}
/*
* bcm47xx_pcmcia_get_status()
*
* Implements the get_status() operation for the in-kernel PCMCIA
* service (formerly SS_GetStatus in Card Services). Essentially just
* fills in bits in `status' according to internal driver state or
* the value of the voltage detect chipselect register.
*
* As a debugging note, during card startup, the PCMCIA core issues
* three set_socket() commands in a row the first with RESET deasserted,
* the second with RESET asserted, and the last with RESET deasserted
* again. Following the third set_socket(), a get_status() command will
* be issued. The kernel is looking for the SS_READY flag (see
* setup_socket(), reset_socket(), and unreset_socket() in cs.c).
*
* Returns: 0
*/
static int
bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status)
{
struct pcmcia_state state;
if ((pcmcia_low_level->socket_state(sock, &state)) < 0) {
printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
return -1;
}
pcmcia_socket[sock].k_state = state;
*status = state.detect ? SS_DETECT : 0;
*status |= state.ready ? SS_READY : 0;
/* The power status of individual sockets is not available
* explicitly from the hardware, so we just remember the state
* and regurgitate it upon request:
*/
*status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0;
if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD)
*status |= state.bvd1 ? SS_STSCHG : 0;
else {
if (state.bvd1 == 0)
*status |= SS_BATDEAD;
else if (state.bvd2 == 0)
*status |= SS_BATWARN;
}
*status |= state.vs_3v ? SS_3VCARD : 0;
*status |= state.vs_Xv ? SS_XVCARD : 0;
DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n",
(*status&SS_DETECT)?"DETECT ":"",
(*status&SS_READY)?"READY ":"",
(*status&SS_BATDEAD)?"BATDEAD ":"",
(*status&SS_BATWARN)?"BATWARN ":"",
(*status&SS_POWERON)?"POWERON ":"",
(*status&SS_STSCHG)?"STSCHG ":"",
(*status&SS_3VCARD)?"3VCARD ":"",
(*status&SS_XVCARD)?"XVCARD ":"");
return 0;
}
/*
* bcm47xx_pcmcia_get_socket()
*
* Implements the get_socket() operation for the in-kernel PCMCIA
* service (formerly SS_GetSocket in Card Services). Not a very
* exciting routine.
*
* Returns: 0
*/
static int
bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state)
{
DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
/* This information was given to us in an earlier call to set_socket(),
* so we're just regurgitating it here:
*/
*state = pcmcia_socket[sock].cs_state;
return 0;
}
/*
* bcm47xx_pcmcia_set_socket()
*
* Implements the set_socket() operation for the in-kernel PCMCIA
* service (formerly SS_SetSocket in Card Services). We more or
* less punt all of this work and let the kernel handle the details
* of power configuration, reset, &c. We also record the value of
* `state' in order to regurgitate it to the PCMCIA core later.
*
* Returns: 0
*/
static int
bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state)
{
struct pcmcia_configure configure;
DEBUG(2, "\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n"
"\tVcc %d Vpp %d irq %d\n",
(state->csc_mask == 0) ? "<NONE>" : "",
(state->csc_mask & SS_DETECT) ? "DETECT " : "",
(state->csc_mask & SS_READY) ? "READY " : "",
(state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "",
(state->csc_mask & SS_BATWARN) ? "BATWARN " : "",
(state->csc_mask & SS_STSCHG) ? "STSCHG " : "",
(state->flags == 0) ? "<NONE>" : "",
(state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "",
(state->flags & SS_IOCARD) ? "IOCARD " : "",
(state->flags & SS_RESET) ? "RESET " : "",
(state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "",
(state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "",
state->Vcc, state->Vpp, state->io_irq);
configure.sock = sock;
configure.vcc = state->Vcc;
configure.vpp = state->Vpp;
configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0;
configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0;
configure.reset = (state->flags & SS_RESET) ? 1 : 0;
if (pcmcia_low_level->configure_socket(&configure) < 0) {
printk(KERN_ERR "Unable to configure socket %u\n", sock);
return -1;
}
pcmcia_socket[sock].cs_state = *state;
return 0;
}
/*
* bcm47xx_pcmcia_get_io_map()
*
* Implements the get_io_map() operation for the in-kernel PCMCIA
* service (formerly SS_GetIOMap in Card Services). Just returns an
* I/O map descriptor which was assigned earlier by a set_io_map().
*
* Returns: 0 on success, -1 if the map index was out of range
*/
static int
bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map)
{
DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock);
if (map->map >= MAX_IO_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n",
__FUNCTION__, map->map);
return -1;
}
*map = pcmcia_socket[sock].io_map[map->map];
return 0;
}
/*
* bcm47xx_pcmcia_set_io_map()
*
* Implements the set_io_map() operation for the in-kernel PCMCIA
* service (formerly SS_SetIOMap in Card Services). We configure
* the map speed as requested, but override the address ranges
* supplied by Card Services.
*
* Returns: 0 on success, -1 on error
*/
int
bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map)
{
unsigned int speed;
unsigned long start;
DEBUG(2, "\tmap %u speed %u\n\tstart 0x%08lx stop 0x%08lx\n"
"\tflags: %s%s%s%s%s%s%s%s\n",
map->map, map->speed, map->start, map->stop,
(map->flags == 0) ? "<NONE>" : "",
(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
(map->flags & MAP_16BIT) ? "16BIT " : "",
(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
(map->flags & MAP_0WS) ? "0WS " : "",
(map->flags & MAP_WRPROT) ? "WRPROT " : "",
(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
if (map->map >= MAX_IO_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n",
__FUNCTION__, map->map);
return -1;
}
if (map->flags & MAP_ACTIVE) {
speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED;
pcmcia_socket[sock].speed_io = speed;
}
start = map->start;
if (map->stop == 1) {
map->stop = PAGE_SIZE - 1;
}
map->start = pcmcia_socket[sock].virt_io;
map->stop = map->start + (map->stop - start);
pcmcia_socket[sock].io_map[map->map] = *map;
DEBUG(2, "set_io_map %d start %x stop %x\n",
map->map, map->start, map->stop);
return 0;
}
/*
* bcm47xx_pcmcia_get_mem_map()
*
* Implements the get_mem_map() operation for the in-kernel PCMCIA
* service (formerly SS_GetMemMap in Card Services). Just returns a
* memory map descriptor which was assigned earlier by a
* set_mem_map() request.
*
* Returns: 0 on success, -1 if the map index was out of range
*/
static int
bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map)
{
DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
if (map->map >= MAX_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n",
__FUNCTION__, map->map);
return -1;
}
*map = pcmcia_socket[sock].mem_map[map->map];
return 0;
}
/*
* bcm47xx_pcmcia_set_mem_map()
*
* Implements the set_mem_map() operation for the in-kernel PCMCIA
* service (formerly SS_SetMemMap in Card Services). We configure
* the map speed as requested, but override the address ranges
* supplied by Card Services.
*
* Returns: 0 on success, -1 on error
*/
static int
bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map)
{
unsigned int speed;
unsigned long start;
u_long flags;
if (map->map >= MAX_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n",
__FUNCTION__, map->map);
return -1;
}
DEBUG(2, "\tmap %u speed %u\n\tsys_start %#lx\n"
"\tsys_stop %#lx\n\tcard_start %#x\n"
"\tflags: %s%s%s%s%s%s%s%s\n",
map->map, map->speed, map->sys_start, map->sys_stop,
map->card_start, (map->flags == 0) ? "<NONE>" : "",
(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
(map->flags & MAP_16BIT) ? "16BIT " : "",
(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
(map->flags & MAP_0WS) ? "0WS " : "",
(map->flags & MAP_WRPROT) ? "WRPROT " : "",
(map->flags & MAP_ATTRIB) ? "ATTRIB " : "",
(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "");
if (map->flags & MAP_ACTIVE) {
/* When clients issue RequestMap, the access speed is not always
* properly configured:
*/
speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED;
/* TBD */
if (map->flags & MAP_ATTRIB) {
pcmcia_socket[sock].speed_attr = speed;
} else {
pcmcia_socket[sock].speed_mem = speed;
}
}
save_flags(flags);
cli();
start = map->sys_start;
if (map->sys_stop == 0)
map->sys_stop = PAGE_SIZE - 1;
if (map->flags & MAP_ATTRIB) {
map->sys_start = pcmcia_socket[sock].phys_attr +
map->card_start;
} else {
map->sys_start = pcmcia_socket[sock].phys_mem +
map->card_start;
}
map->sys_stop = map->sys_start + (map->sys_stop - start);
pcmcia_socket[sock].mem_map[map->map] = *map;
restore_flags(flags);
DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n",
map->map, map->sys_start, map->sys_stop,
map->card_start);
return 0;
}
#if defined(CONFIG_PROC_FS)
/*
* bcm47xx_pcmcia_proc_setup()
*
* Implements the proc_setup() operation for the in-kernel PCMCIA
* service (formerly SS_ProcSetup in Card Services).
*
* Returns: 0 on success, -1 on error
*/
static void
bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base)
{
struct proc_dir_entry *entry;
if ((entry = create_proc_entry("status", 0, base)) == NULL) {
printk(KERN_ERR "Unable to install \"status\" procfs entry\n");
return;
}
entry->read_proc = bcm47xx_pcmcia_proc_status;
entry->data = (void *)sock;
}
/*
* bcm47xx_pcmcia_proc_status()
*
* Implements the /proc/bus/pccard/??/status file.
*
* Returns: the number of characters added to the buffer
*/
static int
bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos,
int count, int *eof, void *data)
{
char *p = buf;
unsigned int sock = (unsigned int)data;
p += sprintf(p, "k_flags : %s%s%s%s%s%s%s\n",
pcmcia_socket[sock].k_state.detect ? "detect " : "",
pcmcia_socket[sock].k_state.ready ? "ready " : "",
pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "",
pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "",
pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "",
pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "",
pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : "");
p += sprintf(p, "status : %s%s%s%s%s%s%s%s%s\n",
pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "",
pcmcia_socket[sock].k_state.ready ? "SS_READY " : "",
pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "",
pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "",
(pcmcia_socket[sock].cs_state.flags & SS_IOCARD &&
pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "",
((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
(pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "",
((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
(pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "",
pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "",
pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : "");
p += sprintf(p, "mask : %s%s%s%s%s\n",
pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "",
pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "",
pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "",
pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "",
pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : "");
p += sprintf(p, "cs_flags : %s%s%s%s%s\n",
pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ?
"SS_PWR_AUTO " : "",
pcmcia_socket[sock].cs_state.flags & SS_IOCARD ?
"SS_IOCARD " : "",
pcmcia_socket[sock].cs_state.flags & SS_RESET ?
"SS_RESET " : "",
pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ?
"SS_SPKR_ENA " : "",
pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ?
"SS_OUTPUT_ENA " : "");
p += sprintf(p, "Vcc : %d\n", pcmcia_socket[sock].cs_state.Vcc);
p += sprintf(p, "Vpp : %d\n", pcmcia_socket[sock].cs_state.Vpp);
p += sprintf(p, "irq : %d\n", pcmcia_socket[sock].cs_state.io_irq);
p += sprintf(p, "I/O : %u\n", pcmcia_socket[sock].speed_io);
p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr);
p += sprintf(p, "common : %u\n", pcmcia_socket[sock].speed_mem);
return p-buf;
}
#endif /* defined(CONFIG_PROC_FS) */