openwrt-xburst/package/openswan/files/ipsec.init

#!/bin/sh /etc/rc.common
# IPsec startup and shutdown script
# Copyright (C) 1998, 1999, 2001  Henry Spencer.
# Copyright (C) 2002              Michael Richardson <mcr@freeswan.org>
# Copyright (C) 2006              OpenWrt.org
# 
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
# 
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# RCSID $Id: setup.in,v 1.122.6.1 2005/07/25 19:17:03 ken Exp $
#
# ipsec         init.d script for starting and stopping
#               the IPsec security subsystem (KLIPS and Pluto).
#
# This script becomes /etc/rc.d/init.d/ipsec (or possibly /etc/init.d/ipsec)
# and is also accessible as "ipsec setup" (the preferred route for human
# invocation).
#
# The startup and shutdown times are a difficult compromise (in particular,
# it is almost impossible to reconcile them with the insanely early/late
# times of NFS filesystem startup/shutdown).  Startup is after startup of
# syslog and pcmcia support; shutdown is just before shutdown of syslog.
#
# chkconfig: 2345 47 76
# description: IPsec provides encrypted and authenticated communications; \
# KLIPS is the kernel half of it, Pluto is the user-level management daemon.

START=60
script_init() {
	me='ipsec setup'		# for messages

	# where the private directory and the config files are
	IPSEC_EXECDIR="${IPSEC_EXECDIR-/usr/libexec/ipsec}"
	IPSEC_LIBDIR="${IPSEC_LIBDIR-/usr/lib/ipsec}"
	IPSEC_SBINDIR="${IPSEC_SBINDIR-/usr/sbin}"
	IPSEC_CONFS="${IPSEC_CONFS-/etc}"

	if test " $IPSEC_DIR" = " "	# if we were not called by the ipsec command
	then
	    # we must establish a suitable PATH ourselves
	    PATH="${IPSEC_SBINDIR}":/sbin:/usr/sbin:/usr/local/bin:/bin:/usr/bin
	    export PATH

	    IPSEC_DIR="$IPSEC_LIBDIR"
	    export IPSEC_DIR IPSEC_CONFS IPSEC_LIBDIR IPSEC_EXECDIR
	fi

	# Check that the ipsec command is available.
	found=
	for dir in `echo $PATH | tr ':' ' '`
	do
		if test -f $dir/ipsec -a -x $dir/ipsec
		then
			found=yes
			break			# NOTE BREAK OUT
		fi
	done
	if ! test "$found"
	then
		echo "cannot find ipsec command -- \`$1' aborted" |
			logger -s -p daemon.error -t ipsec_setup
		exit 1
	fi

	# Pick up IPsec configuration (until we have done this, successfully, we
	# do not know where errors should go, hence the explicit "daemon.error"s.)
	# Note the "--export", which exports the variables created.
	eval `ipsec _confread $config --optional --varprefix IPSEC --export --type config setup`

	if test " $IPSEC_confreadstatus" != " "
	then
	    case $1 in 
	    stop|--stop|_autostop) 
		echo "$IPSEC_confreadstatus -- \`$1' may not work" |
			logger -s -p daemon.error -t ipsec_setup;;

	    *) echo "$IPSEC_confreadstatus -- \`$1' aborted" |
		    logger -s -p daemon.error -t ipsec_setup;
		exit 1;;
	    esac
	fi

	IPSEC_confreadsection=${IPSEC_confreadsection:-setup}
	export IPSEC_confreadsection

	IPSECsyslog=${IPSECsyslog-daemon.error}
	export IPSECsyslog

	# misc setup
	umask 022

	mkdir -p /var/run/pluto
}

script_command() {
	if [ "${USER}" != "root" ]
	then
		echo "permission denied (must be superuser)" |
			logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
		exit 1
	fi
	# make sure all required directories exist
	if [ ! -d /var/run/pluto ]
	then
		mkdir -p /var/run/pluto
	fi
	if [ ! -d /var/lock/subsys ]
	then
		mkdir -p /var/lock/subsys
	fi
	tmp=/var/run/pluto/ipsec_setup.st
	outtmp=/var/run/pluto/ipsec_setup.out
	(
		ipsec _realsetup $1
		echo "$?" >$tmp
	) > ${outtmp} 2>&1
	st=$?
	if test -f $tmp
	then
		st=`cat $tmp`
		rm -f $tmp
	fi
	if [ -f ${outtmp} ]; then
		cat ${outtmp} | logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
		rm -f ${outtmp}
	fi
}


start() {
	script_init start "$@"
	script_command start "$@"
}

stop() {
	script_init stop "$@"
	script_command stop "$@"
}

restart() {
	script_init stop "$@"
	script_command stop "$@"
	script_command start "$@"
}

status() {
	script_init status "$@"
	ipsec _realsetup status
}
EXTRA_COMMANDS=status
EXTRA_HELP="	status	Show the status of the service"