qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-19 19:18:25 +02:00
Code
3070019b68
openwrt-xburst/target/linux/brcm-2.4/patches/014-sierra_support.patch

1487 lines
51 KiB
Diff
Raw Normal View History

This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 23:36:16 +03:00
diff -Naur linux-2.4.35.4-old/drivers/usb/serial/sierra.c linux-2.4.35.4/drivers/usb/serial/sierra.c
--- linux-2.4.35.4-old/drivers/usb/serial/sierra.c 1969-12-31 17:00:00.000000000 -0700
+++ linux-2.4.35.4/drivers/usb/serial/sierra.c 2008-01-25 10:21:25.747868456 -0700
@@ -0,0 +1,1446 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB drive
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * Version history:
+ Version 1.03 (Lloyd):
+ Included support for DTR control and enhanced buffering (should help
+ speed).
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/mm.h>
+#include <asm/uaccess.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+
+#ifdef CONFIG_USB_SERIAL_DEBUG
+ static int debug = 1;
+#else
+ static int debug;
+#endif
+
+#include "usb-serial.h"
+#include "sierra.h"
+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
+#include "pl2303.h" // see /* BEGIN HORRIBLE HACK FOR PL2303 */ below
+#endif
+
+#define DRIVER_VERSION "v1.03"
+
+#if 0
+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0
+
+#define USB_DEVICE_POWER_STATE_D0 0x0000
+#define USB_DEVICE_POWER_STATE_D1 0x0001
+#define USB_DEVICE_POWER_STATE_D2 0x0002
+#define USB_DEVICE_POWER_STATE_D3 0x0003
+
+#define SET_CONTROL_LINE_STATE 0x22
+/*
+ * Output control lines.
+ */
+
+#define ACM_CTRL_DTR 0x01
+#define ACM_CTRL_RTS 0x02
+#endif
+
+//static int sw_attach(struct usb_serial *serial);
+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial);
+
+static int sw_usb_serial_generic_open(struct usb_serial_port *port, struct file *filp);
+static void sw_usb_serial_generic_close(struct usb_serial_port *port, struct file *filp);
+
+#if 1
+/*-----------------------------------------------------------*/
+static int serial_refcount;
+static struct tty_driver serial_tty_driver;
+static struct tty_struct * serial_tty[SERIAL_TTY_MINORS];
+static struct termios * serial_termios[SERIAL_TTY_MINORS];
+static struct termios * serial_termios_locked[SERIAL_TTY_MINORS];
+static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
+
+static LIST_HEAD(usb_serial_driver_list);
+static struct usb_serial *get_free_serial (int num_ports, int *minor);
+static void generic_write_bulk_callback (struct urb *urb);
+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,const struct usb_device_id *id);
+static void usb_serial_disconnect(struct usb_device *dev, void *ptr);
+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb);
+static void port_softint(void *private);
+static void return_serial (struct usb_serial *serial);
+static struct usb_serial *get_free_serial (int num_ports, int *minor);
+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data);
+/*-----------------------------------------------------------*/
+
+#endif
+
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
+ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+ { USB_DEVICE(0x1199, 0x0023) }, /* Sierra Wireless C597 */
+
+ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */
+ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
+ { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
+ { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
+ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
+ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite*/
+ { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
+ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
+ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
+ { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */
+ { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */
+ { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
+ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
+ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
+
+ { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
+ { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
+
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+ { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra Wireless PC 5220 */
+ { USB_DEVICE(0x05C6, 0x6613) }, /* Onda H600/ZTE MF330 */
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+// .owner = THIS_MODULE,
+ .name = "Sierra wireless",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_device_type sierra_device = {
+// .driver = {
+ .owner = THIS_MODULE,
+ .name = "Sierra Wireless",
+// },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 3,
+ //.startup = sw_attach,
+ .shutdown = sw_usb_serial_generic_shutdown,
+ .open = sw_usb_serial_generic_open,
+ .close = sw_usb_serial_generic_close,
+};
+
+#define MAX_NUM_PORTS 8
+
+/* local function prototypes */
+static int serial_open (struct tty_struct *tty, struct file * filp);
+static void serial_close (struct tty_struct *tty, struct file * filp);
+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count);
+static int serial_write_room (struct tty_struct *tty);
+static int serial_chars_in_buffer (struct tty_struct *tty);
+static void serial_throttle (struct tty_struct * tty);
+static void serial_unthrottle (struct tty_struct * tty);
+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void serial_set_termios (struct tty_struct *tty, struct termios * old);
+//static void serial_shutdown (struct usb_serial *serial);
+static void serial_break (struct tty_struct *tty, int break_state);
+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
+static int generic_write_room (struct usb_serial_port *port);
+static void generic_cleanup (struct usb_serial_port *port);
+static int generic_chars_in_buffer (struct usb_serial_port *port);
+//static void generic_shutdown (struct usb_serial *serial);
+
+#if 1
+static struct tty_driver serial_tty_driver = {
+ .magic = TTY_DRIVER_MAGIC,
+ .driver_name = "usb-serial",
+#ifndef CONFIG_DEVFS_FS
+ .name = "ttyUSB",
+#else
+ .name = "usb/tts/%d",
+#endif
+ .major = SERIAL_TTY_MAJOR,
+ .minor_start = 0,
+ .num = SERIAL_TTY_MINORS,
+ .type = TTY_DRIVER_TYPE_SERIAL,
+ .subtype = SERIAL_TYPE_NORMAL,
+ .flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS,
+
+ .refcount = &serial_refcount,
+ .table = serial_tty,
+ .termios = serial_termios,
+ .termios_locked = serial_termios_locked,
+
+ .open = serial_open,
+ .close = serial_close,
+ .write = serial_write,
+ .write_room = serial_write_room,
+ .ioctl = serial_ioctl,
+ .set_termios = serial_set_termios,
+ .throttle = serial_throttle,
+ .unthrottle = serial_unthrottle,
+ .break_ctl = serial_break,
+ .chars_in_buffer = serial_chars_in_buffer,
+ .read_proc = serial_read_proc,
+};
+#endif
+
+
+/*****************************************************************************
+ * Driver tty interface functions
+ *****************************************************************************/
+static struct usb_serial *get_serial_by_minor (unsigned int minor)
+{
+ return serial_table[minor];
+}
+
+static int serial_open (struct tty_struct *tty, struct file * filp)
+{
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ unsigned int portNumber;
+ int retval = 0;
+
+ dbg("%s", __FUNCTION__);
+
+ /* initialize the pointer incase something fails */
+ tty->driver_data = NULL;
+
+ /* get the serial object associated with this tty pointer */
+ serial = get_serial_by_minor (MINOR(tty->device));
+
+ if (serial_paranoia_check (serial, __FUNCTION__))
+ return -ENODEV;
+
+ /* set up our port structure making the tty driver remember our port object, and us it */
+ portNumber = MINOR(tty->device) - serial->minor;
+ port = &serial->port[portNumber];
+ tty->driver_data = port;
+
+ down (&port->sem);
+ port->tty = tty;
+
+ /* lock this module before we call it */
+ if (serial->type->owner)
+ __MOD_INC_USE_COUNT(serial->type->owner);
+
+ ++port->open_count;
+ if (port->open_count == 1) {
+ /* only call the device specific open if this
+ * is the first time the port is opened */
+ if (serial->type->open)
+ retval = serial->type->open(port, filp);
+ else
+ retval = sw_usb_serial_generic_open(port, filp);//@.@
+ }
+
+ if (retval) {
+ port->open_count = 0;
+ if (serial->type->owner)
+ __MOD_DEC_USE_COUNT(serial->type->owner);
+ }
+
+ up (&port->sem);
+ return retval;
+}
+
+static void __serial_close(struct usb_serial_port *port, struct file *filp)
+{
+ if (!port->open_count) {
+ dbg ("%s - port not opened", __FUNCTION__);
+ return;
+ }
+
+ --port->open_count;
+ if (port->open_count <= 0) {
+ /* only call the device specific close if this
+ * port is being closed by the last owner */
+ if (port->serial->type->close)
+ port->serial->type->close(port, filp);
+ else
+ //generic_close(port, filp);
+ sw_usb_serial_generic_close(port, filp);
+ port->open_count = 0;
+ }
+
+ if (port->serial->type->owner)
+ __MOD_DEC_USE_COUNT(port->serial->type->owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file * filp)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* if disconnect beat us to the punch here, there's nothing to do */
+ if (tty->driver_data) {
+ __serial_close(port, filp);
+ }
+
+ up (&port->sem);
+}
+
+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -EINVAL;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
+
+ if (!port->open_count) {
+ dbg("%s - port not opened", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->write)
+ retval = serial->type->write(port, from_user, buf, count);
+ else
+ retval = generic_write(port, from_user, buf, count);
+
+exit:
+ up (&port->sem);
+ return retval;
+}
+
+static int serial_write_room (struct tty_struct *tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -EINVAL;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->write_room)
+ retval = serial->type->write_room(port);
+ else
+ retval = generic_write_room(port);
+
+exit:
+ up (&port->sem);
+ return retval;
+}
+
+static int serial_chars_in_buffer (struct tty_struct *tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -EINVAL;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ dbg("%s = port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->chars_in_buffer)
+ retval = serial->type->chars_in_buffer(port);
+ else
+ retval = generic_chars_in_buffer(port);
+
+exit:
+ up (&port->sem);
+ return retval;
+}
+
+static void serial_throttle (struct tty_struct * tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg ("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function */
+ if (serial->type->throttle)
+ serial->type->throttle(port);
+
+exit:
+ up (&port->sem);
+}
+
+static void serial_unthrottle (struct tty_struct * tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function */
+ if (serial->type->unthrottle)
+ serial->type->unthrottle(port);
+
+exit:
+ up (&port->sem);
+}
+
+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -ENODEV;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+
+ if (!port->open_count) {
+ dbg ("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->ioctl)
+ retval = serial->type->ioctl(port, file, cmd, arg);
+ else
+ retval = -ENOIOCTLCMD;
+
+exit:
+ up (&port->sem);
+ return retval;
+}
+
+static void serial_set_termios (struct tty_struct *tty, struct termios * old)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->set_termios)
+ serial->type->set_termios(port, old);
+
+exit:
+ up (&port->sem);
+}
+
+static void serial_break (struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ dbg("%s - port not open", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ if (serial->type->break_ctl)
+ serial->type->break_ctl(port, break_state);
+
+exit:
+ up (&port->sem);
+}
+#if 0
+static void serial_shutdown (struct usb_serial *serial)
+{
+ dbg ("%s", __FUNCTION__);
+
+ if (serial->type->shutdown)
+ serial->type->shutdown(serial);
+ else
+ generic_shutdown(serial);
+}
+#endif
+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ struct usb_serial *serial;
+ int length = 0;
+ int i;
+ off_t begin = 0;
+ char tmp[40];
+
+ dbg("%s", __FUNCTION__);
+ length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
+ for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
+ serial = get_serial_by_minor(i);
+ if (serial == NULL)
+ continue;
+
+ length += sprintf (page+length, "%d:", i);
+ if (serial->type->owner)
+ length += sprintf (page+length, " module:%s", serial->type->owner->name);
+ length += sprintf (page+length, " name:\"%s\"", serial->type->name);
+ length += sprintf (page+length, " vendor:%04x product:%04x", serial->vendor, serial->product);
+ length += sprintf (page+length, " num_ports:%d", serial->num_ports);
+ length += sprintf (page+length, " port:%d", i - serial->minor + 1);
+
+ usb_make_path(serial->dev, tmp, sizeof(tmp));
+ length += sprintf (page+length, " path:%s", tmp);
+
+ length += sprintf (page+length, "\n");
+ if ((length + begin) > (off + count))
+ goto done;
+ if ((length + begin) < off) {
+ begin += length;
+ length = 0;
+ }
+ }
+ *eof = 1;
+done:
+ if (off >= (length + begin))
+ return 0;
+ *start = page + (off-begin);
+ return ((count < begin+length-off) ? count : begin+length-off);
+}
+
+
+/*-----------------------------------------------------------*/
+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+{
+ struct usb_serial *serial = port->serial;
+ int result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (count == 0) {
+ dbg("%s - write request of 0 bytes", __FUNCTION__);
+ return (0);
+ }
+
+ /* only do something if we have a bulk out endpoint */
+ if (serial->num_bulk_out) {
+ if (port->write_urb->status == -EINPROGRESS) {
+ dbg("%s - already writing", __FUNCTION__);
+ return (0);
+ }
+
+ count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
+
+ if (from_user) {
+ if (copy_from_user(port->write_urb->transfer_buffer, buf, count))
+ return -EFAULT;
+ }
+ else {
+ memcpy (port->write_urb->transfer_buffer, buf, count);
+ }
+
+ usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);
+
+ /* set up our urb */
+ usb_fill_bulk_urb (port->write_urb, serial->dev,
+ usb_sndbulkpipe (serial->dev,
+ port->bulk_out_endpointAddress),
+ port->write_urb->transfer_buffer, count,
+ ((serial->type->write_bulk_callback) ?
+ serial->type->write_bulk_callback :
+ generic_write_bulk_callback), port);
+
+ /* send the data out the bulk port */
+ result = usb_submit_urb(port->write_urb);
+ if (result)
+ err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ else
+ result = count;
+
+ return result;
+ }
+
+ /* no bulk out, so return 0 bytes written */
+ return (0);
+}
+
+static int generic_write_room (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ int room = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (serial->num_bulk_out) {
+ if (port->write_urb->status != -EINPROGRESS)
+ room = port->bulk_out_size;
+ }
+
+ dbg("%s - returns %d", __FUNCTION__, room);
+ return (room);
+}
+
+static int generic_chars_in_buffer (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ int chars = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (serial->num_bulk_out) {
+ if (port->write_urb->status == -EINPROGRESS)
+ chars = port->write_urb->transfer_buffer_length;
+ }
+
+ dbg("%s - returns %d", __FUNCTION__, chars);
+ return (chars);
+}
+#if 0
+static void generic_shutdown (struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __FUNCTION__);
+
+ /* stop reads and writes on all ports */
+ for (i=0; i < serial->num_ports; ++i) {
+ generic_cleanup (&serial->port[i]);
+ }
+}
+static void generic_cleanup (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (serial->dev) {
+ /* shutdown any bulk reads that might be going on */
+ if (serial->num_bulk_out)
+ usb_unlink_urb (port->write_urb);
+ if (serial->num_bulk_in)
+ usb_unlink_urb (port->read_urb);
+ }
+}
+#endif
+/*----------------------------------------------------------*/
+static void generic_write_bulk_callback (struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!serial) {
+ dbg("%s - bad serial pointer, exiting", __FUNCTION__);
+ return;
+ }
+
+ if (urb->status) {
+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ return;
+ }
+
+ queue_task(&port->tqueue, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+
+ return;
+}
+
+static struct usb_serial *get_free_serial (int num_ports, int *minor)
+{
+ struct usb_serial *serial = NULL;
+ int i, j;
+ int good_spot;
+
+ dbg("%s %d", __FUNCTION__, num_ports);
+
+ *minor = 0;
+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
+ if (serial_table[i])
+ continue;
+
+ good_spot = 1;
+ for (j = 1; j <= num_ports-1; ++j)
+ if (serial_table[i+j])
+ good_spot = 0;
+ if (good_spot == 0)
+ continue;
+
+ if (!(serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL))) {
+ err("%s - Out of memory", __FUNCTION__);
+ return NULL;
+ }
+ memset(serial, 0, sizeof(struct usb_serial));
+ serial->magic = USB_SERIAL_MAGIC;
+ serial_table[i] = serial;
+ *minor = i;
+ dbg("%s - minor base = %d", __FUNCTION__, *minor);
+ for (i = *minor+1; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
+ serial_table[i] = serial;
+ return serial;
+ }
+ return NULL;
+}
+
+static void return_serial (struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __FUNCTION__);
+
+ if (serial == NULL)
+ return;
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ serial_table[serial->minor + i] = NULL;
+ }
+
+ return;
+}
+
+static void port_softint(void *private)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)private;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ struct tty_struct *tty;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!serial)
+ return;
+
+ tty = port->tty;
+ if (!tty)
+ return;
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) {
+ dbg("%s - write wakeup call.", __FUNCTION__);
+ (tty->ldisc.write_wakeup)(tty);
+ }
+
+ wake_up_interruptible(&tty->write_wait);
+}
+
+
+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
+ const struct usb_device_id *id)
+{
+ struct usb_serial *serial = NULL;
+ struct usb_serial_port *port;
+ struct usb_interface *interface;
+ struct usb_interface_descriptor *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
+ struct usb_serial_device_type *type = NULL;
+ struct list_head *tmp;
+ int found;
+ int minor;
+ int buffer_size;
+ int i;
+ int num_interrupt_in = 0;
+ int num_bulk_in = 0;
+ int num_bulk_out = 0;
+ int num_ports;
+ int max_endpoints;
+ const struct usb_device_id *id_pattern = NULL;
+
+ /* loop through our list of known serial converters, and see if this
+ device matches. */
+ found = 0;
+ interface = &dev->actconfig->interface[ifnum];
+ list_for_each (tmp, &usb_serial_driver_list) {
+ type = list_entry(tmp, struct usb_serial_device_type, driver_list);
+ id_pattern = usb_match_id(dev, interface, type->id_table);
+ if (id_pattern != NULL) {
+ dbg("descriptor matches");
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ /* no match */
+ dbg("none matched");
+ return(NULL);
+ }
+ /* descriptor matches, let's find the endpoints needed */
+ /* check out the endpoints */
+ iface_desc = &interface->altsetting[0];
+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i];
+
+ if ((endpoint->bEndpointAddress & 0x80) &&
+ ((endpoint->bmAttributes & 3) == 0x02)) {
+ /* we found a bulk in endpoint */
+ dbg("found bulk in");
+ bulk_in_endpoint[num_bulk_in] = endpoint;
+ ++num_bulk_in;
+ }
+
+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
+ ((endpoint->bmAttributes & 3) == 0x02)) {
+ /* we found a bulk out endpoint */
+ dbg("found bulk out");
+ bulk_out_endpoint[num_bulk_out] = endpoint;
+ ++num_bulk_out;
+ }
+
+ if ((endpoint->bEndpointAddress & 0x80) &&
+ ((endpoint->bmAttributes & 3) == 0x03)) {
+ /* we found a interrupt in endpoint */
+ dbg("found interrupt in");
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
+ }
+
+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
+ /* BEGIN HORRIBLE HACK FOR PL2303 */
+ /* this is needed due to the looney way its endpoints are set up */
+ if (((dev->descriptor.idVendor == PL2303_VENDOR_ID) &&
+ (dev->descriptor.idProduct == PL2303_PRODUCT_ID)) ||
+ ((dev->descriptor.idVendor == ATEN_VENDOR_ID) &&
+ (dev->descriptor.idProduct == ATEN_PRODUCT_ID))) {
+ if (ifnum == 1) {
+ /* check out the endpoints of the other interface*/
+ interface = &dev->actconfig->interface[ifnum ^ 1];
+ iface_desc = &interface->altsetting[0];
+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i];
+ if ((endpoint->bEndpointAddress & 0x80) &&
+ ((endpoint->bmAttributes & 3) == 0x03)) {
+ /* we found a interrupt in endpoint */
+ dbg("found interrupt in for Prolific device on separate interface");
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
+ }
+ }
+
+ /* Now make sure the PL-2303 is configured correctly.
+ * If not, give up now and hope this hack will work
+ * properly during a later invocation of usb_serial_probe
+ */
+ if (num_bulk_in == 0 || num_bulk_out == 0) {
+ info("PL-2303 hack: descriptors matched but endpoints did not");
+ return NULL;
+ }
+ }
+ /* END HORRIBLE HACK FOR PL2303 */
+#endif
+
+ /* found all that we need */
+ info("%s converter detected", type->name);
+
+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
+ if (type == &sierra_driver) {
+ num_ports = num_bulk_out;
+ if (num_ports == 0) {
+ err("Sierra 3G device with no bulk out, not allowed.");
+ return NULL;
+ }
+ } else
+#endif
+ num_ports = type->num_ports;
+
+ serial = get_free_serial (num_ports, &minor);
+ if (serial == NULL) {
+ err("No more free serial devices");
+ return NULL;
+ }
+
+ serial->dev = dev;
+ serial->type = type;
+ serial->interface = interface;
+ serial->minor = minor;
+ serial->num_ports = num_ports;
+ serial->num_bulk_in = num_bulk_in;
+ serial->num_bulk_out = num_bulk_out;
+ serial->num_interrupt_in = num_interrupt_in;
+ serial->vendor = dev->descriptor.idVendor;
+ serial->product = dev->descriptor.idProduct;
+
+ /* set up the endpoint information */
+ for (i = 0; i < num_bulk_in; ++i) {
+ endpoint = bulk_in_endpoint[i];
+ port = &serial->port[i];
+ port->read_urb = usb_alloc_urb (0);
+ if (!port->read_urb) {
+ err("No free urbs available");
+ goto probe_error;
+ }
+//Amin marked buffer_size = endpoint->wMaxPacketSize;
+// ===> 20060310 Amin modify for improve EVDO and HSDPA Card
+ buffer_size = 2048;
+ printk("KERNEL DEBUG => USBSERIAL.O buffer_size = 2048\n");
+// <=== 20060310 Amin modify for improve EVDO and HSDPA Card
+ port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ if (!port->bulk_in_buffer) {
+ err("Couldn't allocate bulk_in_buffer");
+ goto probe_error;
+ }
+ usb_fill_bulk_urb (port->read_urb, dev,
+ usb_rcvbulkpipe (dev,
+ endpoint->bEndpointAddress),
+ port->bulk_in_buffer, buffer_size,
+ ((serial->type->read_bulk_callback) ?
+ serial->type->read_bulk_callback :
+ sw_usb_serial_generic_read_bulk_callback),
+ port);
+ }
+
+ for (i = 0; i < num_bulk_out; ++i) {
+ endpoint = bulk_out_endpoint[i];
+ port = &serial->port[i];
+ port->write_urb = usb_alloc_urb(0);
+ if (!port->write_urb) {
+ err("No free urbs available");
+ goto probe_error;
+ }
+ buffer_size = endpoint->wMaxPacketSize;
+ port->bulk_out_size = buffer_size;
+ port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
+ port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ if (!port->bulk_out_buffer) {
+ err("Couldn't allocate bulk_out_buffer");
+ goto probe_error;
+ }
+ usb_fill_bulk_urb (port->write_urb, dev,
+ usb_sndbulkpipe (dev,
+ endpoint->bEndpointAddress),
+ port->bulk_out_buffer, buffer_size,
+ ((serial->type->write_bulk_callback) ?
+ serial->type->write_bulk_callback :
+ generic_write_bulk_callback),
+ port);
+ }
+
+ for (i = 0; i < num_interrupt_in; ++i) {
+ endpoint = interrupt_in_endpoint[i];
+ port = &serial->port[i];
+ port->interrupt_in_urb = usb_alloc_urb(0);
+ if (!port->interrupt_in_urb) {
+ err("No free urbs available");
+ goto probe_error;
+ }
+ buffer_size = endpoint->wMaxPacketSize;
+ port->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
+ port->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ if (!port->interrupt_in_buffer) {
+ err("Couldn't allocate interrupt_in_buffer");
+ goto probe_error;
+ }
+ usb_fill_int_urb (port->interrupt_in_urb, dev,
+ usb_rcvintpipe (dev,
+ endpoint->bEndpointAddress),
+ port->interrupt_in_buffer, buffer_size,
+ serial->type->read_int_callback, port,
+ endpoint->bInterval);
+ }
+
+ /* initialize some parts of the port structures */
+ /* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
+ max_endpoints = max(num_bulk_in, num_bulk_out);
+ max_endpoints = max(max_endpoints, num_interrupt_in);
+ max_endpoints = max(max_endpoints, (int)serial->num_ports);
+ dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints);
+ for (i = 0; i < max_endpoints; ++i) {
+ port = &serial->port[i];
+ port->number = i + serial->minor;
+ port->serial = serial;
+ port->magic = USB_SERIAL_PORT_MAGIC;
+ port->tqueue.routine = port_softint;
+ port->tqueue.data = port;
+ init_MUTEX (&port->sem);
+ }
+
+ /* if this device type has a startup function, call it */
+ if (type->startup) {
+ i = type->startup (serial);
+ if (i < 0)
+ goto probe_error;
+ if (i > 0)
+ return serial;
+ }
+
+ /* initialize the devfs nodes for this device and let the user know what ports we are bound to */
+ for (i = 0; i < serial->num_ports; ++i) {
+ tty_register_devfs (&serial_tty_driver, 0, serial->port[i].number);
+ info("%s converter now attached to ttyUSB%d (or usb/tts/%d for devfs)",
+ type->name, serial->port[i].number, serial->port[i].number);
+ }
+
+ return serial; /* success */
+
+
+probe_error:
+ for (i = 0; i < num_bulk_in; ++i) {
+ port = &serial->port[i];
+ if (port->read_urb)
+ usb_free_urb (port->read_urb);
+ if (port->bulk_in_buffer)
+ kfree (port->bulk_in_buffer);
+ }
+ for (i = 0; i < num_bulk_out; ++i) {
+ port = &serial->port[i];
+ if (port->write_urb)
+ usb_free_urb (port->write_urb);
+ if (port->bulk_out_buffer)
+ kfree (port->bulk_out_buffer);
+ }
+ for (i = 0; i < num_interrupt_in; ++i) {
+ port = &serial->port[i];
+ if (port->interrupt_in_urb)
+ usb_free_urb (port->interrupt_in_urb);
+ if (port->interrupt_in_buffer)
+ kfree (port->interrupt_in_buffer);
+ }
+
+ /* return the minor range that this device had */
+ return_serial (serial);
+
+ /* free up any memory that we allocated */
+ kfree (serial);
+ return NULL;
+}
+
+static void usb_serial_disconnect(struct usb_device *dev, void *ptr)
+{
+ struct usb_serial *serial = (struct usb_serial *) ptr;
+ struct usb_serial_port *port;
+ int i;
+
+ dbg ("%s", __FUNCTION__);
+ if (serial) {
+ /* fail all future close/read/write/ioctl/etc calls */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = &serial->port[i];
+ down (&port->sem);
+ if (port->tty != NULL) {
+ while (port->open_count > 0) {
+ //__serial_close(port, NULL);
+ sw_usb_serial_generic_close(port,NULL);
+ }
+ port->tty->driver_data = NULL;
+ }
+ up (&port->sem);
+ }
+
+ serial->dev = NULL;
+ //serial_shutdown (serial);
+ sw_usb_serial_generic_shutdown(serial);
+
+ for (i = 0; i < serial->num_ports; ++i)
+ serial->port[i].open_count = 0;
+
+ for (i = 0; i < serial->num_bulk_in; ++i) {
+ port = &serial->port[i];
+ if (port->read_urb) {
+ usb_unlink_urb (port->read_urb);
+ usb_free_urb (port->read_urb);
+ }
+ if (port->bulk_in_buffer)
+ kfree (port->bulk_in_buffer);
+ }
+ for (i = 0; i < serial->num_bulk_out; ++i) {
+ port = &serial->port[i];
+ if (port->write_urb) {
+ usb_unlink_urb (port->write_urb);
+ usb_free_urb (port->write_urb);
+ }
+ if (port->bulk_out_buffer)
+ kfree (port->bulk_out_buffer);
+ }
+ for (i = 0; i < serial->num_interrupt_in; ++i) {
+ port = &serial->port[i];
+ if (port->interrupt_in_urb) {
+ usb_unlink_urb (port->interrupt_in_urb);
+ usb_free_urb (port->interrupt_in_urb);
+ }
+ if (port->interrupt_in_buffer)
+ kfree (port->interrupt_in_buffer);
+ }
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ tty_unregister_devfs (&serial_tty_driver, serial->port[i].number);
+ info("%s converter now disconnected from ttyUSB%d", serial->type->name, serial->port[i].number);
+ }
+
+ /* return the minor range that this device had */
+ return_serial (serial);
+
+ /* free up any memory that we allocated */
+ kfree (serial);
+
+ } else {
+ info("device disconnected");
+ }
+
+}
+
+#if 0
+static int sw_attach(struct usb_serial *serial)
+{
+ struct usb_device *hdev = serial->dev;
+ int rc;
+
+ dbg("%s - serial(0x%p)", __FUNCTION__, serial);
+
+ rc = usb_control_msg(
+ hdev,
+ usb_sndctrlpipe(hdev, 0),
+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */
+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */
+ USB_DEVICE_POWER_STATE_D0, /* wValue */
+ 0, /* wIndex */
+ NULL, /* Data */
+ 0, /* wLength */
+ 1000); /* Timeout */
+
+ err("%s - rc(%d)", __FUNCTION__, rc);
+ return rc;
+}
+#endif
+//void sw_usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial *serial = port->serial;
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+ int result;
+ int i;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (urb->status) {
+ dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
+ return;
+ }
+
+ //usb_serial_dbg_data(__FILE__, __FUNCTION__, urb->actual_length, data);
+
+ tty = port->tty;
+ if (tty && urb->actual_length) {
+ #if 0
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
+ #endif
+ #if 1
+ for (i = 0; i < urb->actual_length ; ++i) {
+ /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
+ if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ tty_flip_buffer_push(tty);
+ }
+ /* this doesn't actually push the data through unless tty->low_latency is set */
+ tty_insert_flip_char(tty, data[i], 0);
+ }
+ tty_flip_buffer_push(tty);
+ #endif
+
+ }
+ else
+ dbg("%s: empty read urb received", __FUNCTION__);
+
+ /* Continue trying to always read */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe (serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ ((serial->type->read_bulk_callback) ?
+ serial->type->read_bulk_callback :
+ sw_usb_serial_generic_read_bulk_callback), port);
+ result = usb_submit_urb(port->read_urb);
+ //result = usb_submit_urb(port->read_urb, GFP_ATOMIC); //for kernel 2.6
+ if (result)
+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+}
+#if 1
+static int generic_open (struct usb_serial_port *port, struct file *filp)
+{
+ struct usb_serial *serial = port->serial;
+ int result = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* force low_latency on so that our tty_push actually forces the data through,
+ otherwise it is scheduled, and with high data rates (like with OHCI) data
+ can get lost. */
+ if (port->tty)
+ port->tty->low_latency = 1;
+
+ /* if we have a bulk interrupt, start reading from it */
+ if (serial->num_bulk_in) {
+ /* Start reading from the device */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ ((serial->type->read_bulk_callback) ?
+ serial->type->read_bulk_callback :
+ sw_usb_serial_generic_read_bulk_callback),
+ port);
+ result = usb_submit_urb(port->read_urb); //, GFP_KERNEL);
+ if (result)
+ //dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+
+ }
+
+ return result;
+}
+#endif
+int sw_usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
+{
+ int rc;
+ struct usb_serial *serial = port->serial;
+ struct usb_device *hdev = serial->dev;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ rc = generic_open(port, filp);
+ err("%s - rc(%d)", __FUNCTION__, rc);
+
+ if(0 == rc)
+ {
+ rc = usb_control_msg(
+ hdev,
+ usb_sndctrlpipe(hdev, 0),
+ SET_CONTROL_LINE_STATE, /* bRequest */
+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */
+ ACM_CTRL_DTR|ACM_CTRL_RTS, /* wValue */
+ 0, /* wIndex */
+ NULL, /* Data */
+ 0, /* wLength */
+ 1000); /* Timeout */
+ err("%s - usb_control_msg: rc(%d)", __FUNCTION__, rc);
+ }
+
+ return rc;
+}
+
+static void generic_cleanup (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (serial->dev) {
+ /* shutdown any bulk reads that might be going on */
+ if (serial->num_bulk_out)
+ usb_unlink_urb(port->write_urb);
+ //usb_kill_urb(port->write_urb);
+ if (serial->num_bulk_in)
+ usb_unlink_urb(port->read_urb);
+ //usb_kill_urb(port->read_urb);
+ }
+}
+
+static void sw_usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
+{
+ int rc;
+ struct usb_serial *serial = port->serial;
+ struct usb_device *hdev = serial->dev;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ rc = usb_control_msg(
+ hdev,
+ usb_sndctrlpipe(hdev, 0),
+ SET_CONTROL_LINE_STATE, /* bRequest */
+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */
+ 0, /* wValue */
+ 0, /* wIndex */
+ NULL, /* Data */
+ 0, /* wLength */
+ 1000); /* Timeout */
+ err("%s - rc(%d)", __FUNCTION__, rc);
+
+ generic_cleanup (port);
+}
+
+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial)
+{
+ int i, rc;
+ struct usb_device *hdev = serial->dev;
+
+ dbg("%s serial(0x%p)", __FUNCTION__, serial);
+
+ if(hdev)
+ {
+ rc = usb_control_msg(
+ hdev,
+ usb_sndctrlpipe(hdev, 0),
+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */
+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */
+ USB_DEVICE_POWER_STATE_D3, /* wValue */
+ 0, /* wIndex */
+ NULL, /* Data */
+ 0, /* wLength */
+ 1000); /* Timeout */
+ err("%s - rc(%d)", __FUNCTION__, rc);
+ }
+
+ /* stop reads and writes on all ports */
+ for (i=0; i < serial->num_ports; ++i) {
+ generic_cleanup(&serial->port[i]);
+ }
+}
+int usb_serial_register(struct usb_serial_device_type *new_device)
+{
+ /* Add this device to our list of devices */
+ list_add(&new_device->driver_list, &usb_serial_driver_list);
+
+ info ("USB Serial support registered for %s", new_device->name);
+
+ usb_scan_devices();
+
+ return 0;
+}
+
+
+void usb_serial_deregister(struct usb_serial_device_type *device)
+{
+ struct usb_serial *serial;
+ int i;
+
+ info("USB Serial deregistering driver %s", device->name);
+
+ /* clear out the serial_table if the device is attached to a port */
+ for(i = 0; i < SERIAL_TTY_MINORS; ++i) {
+ serial = serial_table[i];
+ if ((serial != NULL) && (serial->type == device)) {
+ usb_driver_release_interface (&sierra_driver, serial->interface);
+ usb_serial_disconnect (NULL, serial);
+ }
+ }
+
+ list_del(&device->driver_list);
+}
+
+static int __init sierra_init(void)
+{
+ int retval;
+ int i;
+
+ /* Initalize our global data */
+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
+ serial_table[i] = NULL;
+ }
+
+ /* register the tty driver */
+ serial_tty_driver.init_termios = tty_std_termios;
+ serial_tty_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ if (tty_register_driver (&serial_tty_driver)) {
+ err("%s - failed to register tty driver", __FUNCTION__);
+ return -1;
+ }
+
+ retval = usb_serial_register(&sierra_device);
+ if (retval)
+ {
+ tty_unregister_driver(&serial_tty_driver);
+ printk("%s return usb_serial_register. retval=[%d].\n",__FUNCTION__, retval);
+ return retval;
+ }
+ retval = usb_register(&sierra_driver);
+ if (retval){
+ usb_serial_deregister(&sierra_device);
+ tty_unregister_driver(&serial_tty_driver);
+ err("usb_register failed for the Sierra 3G USB-Serial driver. Error number %d\n", retval);
+ return -1;
+ }
+
+ return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+ usb_deregister(&sierra_driver);
+ usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
diff -Naur linux-2.4.35.4-old/drivers/usb/serial/sierra.h linux-2.4.35.4/drivers/usb/serial/sierra.h
--- linux-2.4.35.4-old/drivers/usb/serial/sierra.h 1969-12-31 17:00:00.000000000 -0700
+++ linux-2.4.35.4/drivers/usb/serial/sierra.h 2008-01-25 10:15:35.640743578 -0700
@@ -0,0 +1,32 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB drive
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * Version history:
+ Version 1.03 (Lloyd):
+ Included support for DTR control and enhanced buffering (should help
+ speed).
+ */
+
+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0
+
+#define USB_DEVICE_POWER_STATE_D0 0x0000
+#define USB_DEVICE_POWER_STATE_D1 0x0001
+#define USB_DEVICE_POWER_STATE_D2 0x0002
+#define USB_DEVICE_POWER_STATE_D3 0x0003
+
+#define SET_CONTROL_LINE_STATE 0x22
+/*
+ * Output control lines.
+ */
+
+#define ACM_CTRL_DTR 0x01
+#define ACM_CTRL_RTS 0x02
+
Copy Permalink