2008-07-05 17:49:07 +03:00
|
|
|
--- a/Documentation/serial/driver
|
|
|
|
+++ b/Documentation/serial/driver
|
|
|
|
@@ -186,6 +186,17 @@
|
|
|
|
Locking: port_sem taken.
|
|
|
|
Interrupts: caller dependent.
|
|
|
|
|
|
|
|
+ flush_buffer(port)
|
|
|
|
+ Flush any write buffers, reset any DMA state and stop any
|
|
|
|
+ ongoing DMA transfers.
|
|
|
|
+
|
|
|
|
+ This will be called whenever the port->info->xmit circular
|
|
|
|
+ buffer is cleared.
|
|
|
|
+
|
|
|
|
+ Locking: port->lock taken.
|
|
|
|
+ Interrupts: locally disabled.
|
|
|
|
+ This call must not sleep
|
|
|
|
+
|
|
|
|
set_termios(port,termios,oldtermios)
|
|
|
|
Change the port parameters, including word length, parity, stop
|
|
|
|
bits. Update read_status_mask and ignore_status_mask to indicate
|
|
|
|
--- a/arch/avr32/Kconfig
|
|
|
|
+++ b/arch/avr32/Kconfig
|
|
|
|
@@ -47,6 +47,9 @@
|
|
|
|
config GENERIC_TIME
|
|
|
|
def_bool y
|
|
|
|
|
|
|
|
+config GENERIC_CLOCKEVENTS
|
|
|
|
+ def_bool y
|
|
|
|
+
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
|
|
def_bool n
|
|
|
|
|
|
|
|
@@ -70,6 +73,8 @@
|
|
|
|
|
|
|
|
menu "System Type and features"
|
|
|
|
|
|
|
|
+source "kernel/time/Kconfig"
|
|
|
|
+
|
|
|
|
config SUBARCH_AVR32B
|
|
|
|
bool
|
|
|
|
config MMU
|
|
|
|
@@ -83,6 +88,7 @@
|
|
|
|
select MMU
|
|
|
|
select PERFORMANCE_COUNTERS
|
|
|
|
select HAVE_GPIO_LIB
|
|
|
|
+ select GENERIC_ALLOCATOR
|
|
|
|
|
|
|
|
#
|
|
|
|
# CPU types
|
|
|
|
@@ -117,6 +123,9 @@
|
|
|
|
if BOARD_ATSTK1000
|
|
|
|
source "arch/avr32/boards/atstk1000/Kconfig"
|
|
|
|
endif
|
|
|
|
+if BOARD_ATNGW100
|
|
|
|
+source "arch/avr32/boards/atngw100/Kconfig"
|
|
|
|
+endif
|
|
|
|
|
|
|
|
choice
|
|
|
|
prompt "Boot loader type"
|
|
|
|
@@ -142,6 +151,9 @@
|
|
|
|
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
|
|
|
|
+config QUICKLIST
|
|
|
|
+ def_bool y
|
|
|
|
+
|
|
|
|
config HAVE_ARCH_BOOTMEM_NODE
|
|
|
|
def_bool n
|
|
|
|
|
|
|
|
@@ -180,6 +192,10 @@
|
|
|
|
be dumped to the console when a Non-Maskable Interrupt
|
|
|
|
happens.
|
|
|
|
|
|
|
|
+config DW_DMAC
|
|
|
|
+ tristate "Synopsys DesignWare DMA Controller support"
|
|
|
|
+ default y if CPU_AT32AP7000
|
|
|
|
+
|
|
|
|
# FPU emulation goes here
|
|
|
|
|
|
|
|
source "kernel/Kconfig.hz"
|
|
|
|
@@ -196,6 +212,11 @@
|
|
|
|
|
|
|
|
menu "Power management options"
|
|
|
|
|
|
|
|
+config ARCH_SUSPEND_POSSIBLE
|
|
|
|
+ def_bool y
|
|
|
|
+
|
|
|
|
+source "kernel/power/Kconfig"
|
|
|
|
+
|
|
|
|
menu "CPU Frequency scaling"
|
|
|
|
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
--- a/arch/avr32/Makefile
|
|
|
|
+++ b/arch/avr32/Makefile
|
|
|
|
@@ -32,6 +32,7 @@
|
|
|
|
core-y += arch/avr32/kernel/
|
|
|
|
core-y += arch/avr32/mm/
|
|
|
|
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
|
|
|
|
+drivers-y += arch/avr32/drivers/
|
|
|
|
libs-y += arch/avr32/lib/
|
|
|
|
|
|
|
|
archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/boards/atngw100/Kconfig
|
2007-07-13 12:56:05 +03:00
|
|
|
@@ -0,0 +1,12 @@
|
|
|
|
+# NGW100 customization
|
|
|
|
+
|
|
|
|
+config BOARD_ATNGW100_I2C_GPIO
|
|
|
|
+ bool "Use GPIO for i2c instead of built-in TWI module"
|
|
|
|
+ help
|
|
|
|
+ The driver for the built-in TWI module has been plagued by
|
|
|
|
+ various problems, while the i2c-gpio driver is based on the
|
|
|
|
+ trusty old i2c-algo-bit bitbanging engine, making it work
|
|
|
|
+ on pretty much any setup.
|
|
|
|
+
|
|
|
|
+ Choose 'Y' here if you're having i2c-related problems and
|
2008-04-23 23:25:37 +03:00
|
|
|
+ want to rule out the i2c bus driver.
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/boards/atngw100/setup.c
|
|
|
|
+++ b/arch/avr32/boards/atngw100/setup.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -25,6 +25,13 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
#include <asm/arch/init.h>
|
|
|
|
#include <asm/arch/portmux.h>
|
2008-06-13 00:13:40 +03:00
|
|
|
|
|
|
|
+/* Oscillator frequencies. These are board-specific */
|
|
|
|
+unsigned long at32_board_osc_rates[3] = {
|
|
|
|
+ [0] = 32768, /* 32.768 kHz on RTC osc */
|
|
|
|
+ [1] = 20000000, /* 20 MHz on osc0 */
|
|
|
|
+ [2] = 12000000, /* 12 MHz on osc1 */
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
/* Initialized by bootloader-specific startup code. */
|
|
|
|
struct tag *bootloader_tags __initdata;
|
|
|
|
|
|
|
|
@@ -37,11 +44,16 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
static struct spi_board_info spi0_board_info[] __initdata = {
|
|
|
|
{
|
|
|
|
.modalias = "mtd_dataflash",
|
|
|
|
- .max_speed_hz = 10000000,
|
|
|
|
+ .max_speed_hz = 8000000,
|
|
|
|
.chip_select = 0,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
+static struct mci_platform_data __initdata mci0_data = {
|
|
|
|
+ .detect_pin = GPIO_PIN_PC(25),
|
|
|
|
+ .wp_pin = GPIO_PIN_PE(0),
|
|
|
|
+};
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-04-23 23:25:37 +03:00
|
|
|
/*
|
|
|
|
* The next two functions should go away as the boot loader is
|
|
|
|
* supposed to initialize the macb address registers with a valid
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -124,6 +136,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
|
|
|
|
static struct i2c_gpio_platform_data i2c_gpio_data = {
|
|
|
|
.sda_pin = GPIO_PIN_PA(6),
|
|
|
|
.scl_pin = GPIO_PIN_PA(7),
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -139,6 +152,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
.platform_data = &i2c_gpio_data,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
+#endif
|
|
|
|
|
|
|
|
static int __init atngw100_init(void)
|
|
|
|
{
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -157,6 +171,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
|
|
|
|
|
|
|
|
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
|
|
|
+ at32_add_device_mci(0, &mci0_data);
|
|
|
|
at32_add_device_usba(0, NULL);
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -165,11 +180,15 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
}
|
|
|
|
platform_device_register(&ngw_gpio_leds);
|
|
|
|
|
|
|
|
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
|
|
|
|
at32_select_gpio(i2c_gpio_data.sda_pin,
|
|
|
|
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
|
|
|
at32_select_gpio(i2c_gpio_data.scl_pin,
|
|
|
|
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
|
|
|
platform_device_register(&i2c_gpio_device);
|
|
|
|
+#else
|
|
|
|
+ at32_add_device_twi(0, NULL, 0);
|
|
|
|
+#endif
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/arch/avr32/boards/atstk1000/Kconfig
|
|
|
|
+++ b/arch/avr32/boards/atstk1000/Kconfig
|
|
|
|
@@ -18,6 +18,10 @@
|
|
|
|
bool "ATSTK1004"
|
|
|
|
select CPU_AT32AP7002
|
|
|
|
|
|
|
|
+config BOARD_ATSTK1006
|
|
|
|
+ bool "ATSTK1006"
|
|
|
|
+ select CPU_AT32AP7000
|
|
|
|
+
|
|
|
|
endchoice
|
|
|
|
|
|
|
|
|
|
|
|
@@ -102,4 +106,60 @@
|
|
|
|
depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
|
|
|
|
default y
|
|
|
|
|
|
|
|
+config BOARD_ATSTK100X_ENABLE_AC97
|
|
|
|
+ bool "Use AC97C instead of ABDAC"
|
|
|
|
+ help
|
|
|
|
+ Select this if you want to use the built-in AC97 controller
|
|
|
|
+ instead of the built-in Audio Bitstream DAC. These share
|
|
|
|
+ the same I/O pins on the AP7000, so both can't be enabled
|
|
|
|
+ at the same time.
|
|
|
|
+
|
|
|
|
+ Note that the STK1000 kit doesn't ship with an AC97 codec on
|
|
|
|
+ board, so say N unless you've got an expansion board with an
|
|
|
|
+ AC97 codec on it that you want to use.
|
|
|
|
+
|
|
|
|
+config BOARD_ATSTK1000_CF_HACKS
|
|
|
|
+ bool "ATSTK1000 CompactFlash hacks"
|
|
|
|
+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
|
|
|
|
+ help
|
|
|
|
+ Select this if you have re-routed the CompactFlash RESET and
|
|
|
|
+ CD signals to GPIOs on your STK1000. This is necessary for
|
|
|
|
+ reset and card detection to work properly, although some CF
|
|
|
|
+ cards may be able to cope without reset.
|
|
|
|
+
|
|
|
|
+config BOARD_ATSTK1000_CF_RESET_PIN
|
|
|
|
+ hex "CompactFlash RESET pin"
|
|
|
|
+ default 0x30
|
|
|
|
+ depends on BOARD_ATSTK1000_CF_HACKS
|
|
|
|
+ help
|
|
|
|
+ Select which GPIO pin to use for the CompactFlash RESET
|
|
|
|
+ signal. This is specified as a hexadecimal number and should
|
|
|
|
+ be defined as 0x20 * gpio_port + pin.
|
|
|
|
+
|
|
|
|
+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
|
|
|
|
+
|
|
|
|
+config BOARD_ATSTK1000_CF_DETECT_PIN
|
|
|
|
+ hex "CompactFlash DETECT pin"
|
|
|
|
+ default 0x3e
|
|
|
|
+ depends on BOARD_ATSTK1000_CF_HACKS
|
|
|
|
+ help
|
|
|
|
+ Select which GPIO pin to use for the CompactFlash CD
|
|
|
|
+ signal. This is specified as a hexadecimal number and should
|
|
|
|
+ be defined as 0x20 * gpio_port + pin.
|
|
|
|
+
|
|
|
|
+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
|
|
|
|
+
|
|
|
|
+config BOARD_ATSTK100X_ENABLE_PSIF
|
|
|
|
+ bool "Enable PSIF peripheral (PS/2 support)"
|
|
|
|
+ default n
|
|
|
|
+ help
|
|
|
|
+ Select this if you want to use the PSIF peripheral to hook up PS/2
|
|
|
|
+ devices to your STK1000. This will require a hardware modification to
|
|
|
|
+ work correctly, since PS/2 devices require 5 volt power and signals,
|
|
|
|
+ while the STK1000 only provides 3.3 volt.
|
|
|
|
+
|
|
|
|
+ Say N if you have not modified the hardware to boost the voltage, say
|
|
|
|
+ Y if you have level convertion hardware or a PS/2 device capable of
|
|
|
|
+ operating on 3.3 volt.
|
|
|
|
+
|
|
|
|
endif # stk 1000
|
|
|
|
--- a/arch/avr32/boards/atstk1000/Makefile
|
|
|
|
+++ b/arch/avr32/boards/atstk1000/Makefile
|
|
|
|
@@ -2,3 +2,4 @@
|
|
|
|
obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
|
|
|
|
obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
|
|
|
|
obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
|
|
|
|
+obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/boards/atstk1000/atstk1002.c
|
|
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,7 +1,7 @@
|
|
|
|
/*
|
|
|
|
- * ATSTK1002 daughterboard-specific init code
|
|
|
|
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
|
|
|
|
*
|
|
|
|
- * Copyright (C) 2005-2006 Atmel Corporation
|
|
|
|
+ * Copyright (C) 2005-2007 Atmel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
@@ -28,6 +28,80 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
#include "atstk1000.h"
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Oscillator frequencies. These are board specific */
|
|
|
|
+unsigned long at32_board_osc_rates[3] = {
|
|
|
|
+ [0] = 32768, /* 32.768 kHz on RTC osc */
|
|
|
|
+ [1] = 20000000, /* 20 MHz on osc0 */
|
|
|
|
+ [2] = 12000000, /* 12 MHz on osc1 */
|
|
|
|
+};
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
|
|
|
|
+ * have the AT32AP7000 chip on board; the difference is that the
|
|
|
|
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
|
|
|
|
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
|
|
|
|
+ * none.)
|
|
|
|
+ *
|
|
|
|
+ * The RAM difference is handled by the boot loader, so the only
|
|
|
|
+ * difference we end up handling here is the NAND flash.
|
|
|
|
+ */
|
|
|
|
+#ifdef CONFIG_BOARD_ATSTK1006
|
|
|
|
+#include <linux/mtd/partitions.h>
|
|
|
|
+#include <asm/arch/smc.h>
|
|
|
|
+
|
|
|
|
+static struct smc_timing nand_timing __initdata = {
|
|
|
|
+ .ncs_read_setup = 0,
|
|
|
|
+ .nrd_setup = 10,
|
|
|
|
+ .ncs_write_setup = 0,
|
|
|
|
+ .nwe_setup = 10,
|
|
|
|
+
|
|
|
|
+ .ncs_read_pulse = 30,
|
|
|
|
+ .nrd_pulse = 15,
|
|
|
|
+ .ncs_write_pulse = 30,
|
|
|
|
+ .nwe_pulse = 15,
|
|
|
|
+
|
|
|
|
+ .read_cycle = 30,
|
|
|
|
+ .write_cycle = 30,
|
|
|
|
+
|
|
|
|
+ .ncs_read_recover = 0,
|
|
|
|
+ .nrd_recover = 15,
|
|
|
|
+ .ncs_write_recover = 0,
|
|
|
|
+ /* WE# high -> RE# low min 60 ns */
|
|
|
|
+ .nwe_recover = 50,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct smc_config nand_config __initdata = {
|
|
|
|
+ .bus_width = 1,
|
|
|
|
+ .nrd_controlled = 1,
|
|
|
|
+ .nwe_controlled = 1,
|
|
|
|
+ .nwait_mode = 0,
|
|
|
|
+ .byte_write = 0,
|
|
|
|
+ .tdf_cycles = 2,
|
|
|
|
+ .tdf_mode = 0,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct mtd_partition nand_partitions[] = {
|
|
|
|
+ {
|
|
|
|
+ .name = "main",
|
|
|
|
+ .offset = 0x00000000,
|
|
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
|
|
|
|
+{
|
|
|
|
+ *num_partitions = ARRAY_SIZE(nand_partitions);
|
|
|
|
+ return nand_partitions;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
|
|
|
|
+ .cle = 21,
|
|
|
|
+ .ale = 22,
|
|
|
|
+ .rdy_pin = GPIO_PIN_PB(30),
|
|
|
|
+ .enable_pin = GPIO_PIN_PB(29),
|
|
|
|
+ .partition_info = nand_part_info,
|
|
|
|
+};
|
|
|
|
+#endif
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
struct eth_addr {
|
|
|
|
u8 addr[6];
|
|
|
|
@@ -83,6 +157,19 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
} };
|
|
|
|
#endif
|
|
|
|
|
|
|
|
+static struct cf_platform_data __initdata cf0_data = {
|
|
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
|
|
|
|
+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
|
|
|
|
+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
|
|
|
|
+#else
|
|
|
|
+ .detect_pin = GPIO_PIN_NONE,
|
|
|
|
+ .reset_pin = GPIO_PIN_NONE,
|
|
|
|
+#endif
|
|
|
|
+ .vcc_pin = GPIO_PIN_NONE,
|
|
|
|
+ .ready_pin = GPIO_PIN_PB(27),
|
|
|
|
+ .cs = 4,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
/*
|
|
|
|
* The next two functions should go away as the boot loader is
|
|
|
|
* supposed to initialize the macb address registers with a valid
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -212,6 +299,12 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
at32_add_system_devices();
|
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
+#ifdef CONFIG_BOARD_ATSTK1006
|
|
|
|
+ smc_set_timing(&nand_config, &nand_timing);
|
|
|
|
+ smc_set_configuration(3, &nand_config);
|
|
|
|
+ at32_add_device_nand(0, &atstk1006_nand_data);
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
2008-02-07 22:08:19 +02:00
|
|
|
at32_add_device_usart(1);
|
|
|
|
#else
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -228,16 +321,30 @@
|
|
|
|
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
2008-02-07 22:08:19 +02:00
|
|
|
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
|
|
#endif
|
2008-04-23 23:25:37 +03:00
|
|
|
+ at32_add_device_twi(0, NULL, 0);
|
2008-02-07 22:08:19 +02:00
|
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
|
|
+ at32_add_device_mci(0, NULL);
|
|
|
|
+#endif
|
|
|
|
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
|
|
|
|
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
|
|
|
|
#else
|
2008-06-13 00:13:40 +03:00
|
|
|
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
|
|
|
|
- fbmem_start, fbmem_size);
|
|
|
|
+ fbmem_start, fbmem_size, 0);
|
2008-02-07 22:08:19 +02:00
|
|
|
#endif
|
|
|
|
at32_add_device_usba(0, NULL);
|
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
2008-07-05 17:49:07 +03:00
|
|
|
+ at32_add_device_ac97c(0, NULL);
|
2008-02-07 22:08:19 +02:00
|
|
|
+#else
|
|
|
|
+ at32_add_device_abdac(0);
|
2008-06-13 00:13:40 +03:00
|
|
|
+#endif
|
|
|
|
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
|
|
at32_add_device_ssc(0, ATMEL_SSC_TX);
|
2008-04-23 23:25:37 +03:00
|
|
|
#endif
|
|
|
|
+ at32_add_device_cf(0, 2, &cf0_data);
|
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
|
|
|
|
+ at32_add_device_psif(0);
|
|
|
|
+ at32_add_device_psif(1);
|
2008-06-13 00:13:40 +03:00
|
|
|
+#endif
|
|
|
|
|
|
|
|
atstk1000_setup_j2_leds();
|
|
|
|
atstk1002_setup_extdac();
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/boards/atstk1000/atstk1003.c
|
|
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -27,6 +27,13 @@
|
|
|
|
|
|
|
|
#include "atstk1000.h"
|
|
|
|
|
|
|
|
+/* Oscillator frequencies. These are board specific */
|
|
|
|
+unsigned long at32_board_osc_rates[3] = {
|
|
|
|
+ [0] = 32768, /* 32.768 kHz on RTC osc */
|
|
|
|
+ [1] = 20000000, /* 20 MHz on osc0 */
|
|
|
|
+ [2] = 12000000, /* 12 MHz on osc1 */
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
|
|
static struct at73c213_board_info at73c213_data = {
|
|
|
|
.ssc_id = 0,
|
|
|
|
@@ -59,6 +66,19 @@
|
|
|
|
} };
|
2008-04-23 23:25:37 +03:00
|
|
|
#endif
|
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct cf_platform_data __initdata cf0_data = {
|
|
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
|
|
|
|
+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
|
|
|
|
+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
|
|
|
|
+#else
|
|
|
|
+ .detect_pin = GPIO_PIN_NONE,
|
|
|
|
+ .reset_pin = GPIO_PIN_NONE,
|
|
|
|
+#endif
|
|
|
|
+ .vcc_pin = GPIO_PIN_NONE,
|
|
|
|
+ .ready_pin = GPIO_PIN_PB(27),
|
|
|
|
+ .cs = 4,
|
|
|
|
+};
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
|
|
static void __init atstk1003_setup_extdac(void)
|
|
|
|
{
|
|
|
|
@@ -147,12 +167,22 @@
|
|
|
|
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
|
|
#endif
|
|
|
|
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
|
|
- at32_add_device_mci(0);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ at32_add_device_mci(0, NULL);
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif
|
|
|
|
at32_add_device_usba(0, NULL);
|
2008-02-07 22:08:19 +02:00
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
2008-07-05 17:49:07 +03:00
|
|
|
+ at32_add_device_ac97c(0, NULL);
|
2007-10-16 15:22:57 +03:00
|
|
|
+#else
|
2007-07-12 17:11:31 +03:00
|
|
|
+ at32_add_device_abdac(0);
|
2007-10-16 15:22:57 +03:00
|
|
|
+#endif
|
2008-06-13 00:13:40 +03:00
|
|
|
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
|
|
at32_add_device_ssc(0, ATMEL_SSC_TX);
|
|
|
|
#endif
|
2008-02-07 22:08:19 +02:00
|
|
|
+ at32_add_device_cf(0, 2, &cf0_data);
|
2008-04-23 23:25:37 +03:00
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
|
|
|
|
+ at32_add_device_psif(0);
|
|
|
|
+ at32_add_device_psif(1);
|
|
|
|
+#endif
|
2008-06-13 00:13:40 +03:00
|
|
|
|
|
|
|
atstk1000_setup_j2_leds();
|
|
|
|
atstk1003_setup_extdac();
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/boards/atstk1000/atstk1004.c
|
|
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -29,6 +29,13 @@
|
|
|
|
|
|
|
|
#include "atstk1000.h"
|
|
|
|
|
|
|
|
+/* Oscillator frequencies. These are board specific */
|
|
|
|
+unsigned long at32_board_osc_rates[3] = {
|
|
|
|
+ [0] = 32768, /* 32.768 kHz on RTC osc */
|
|
|
|
+ [1] = 20000000, /* 20 MHz on osc0 */
|
|
|
|
+ [2] = 12000000, /* 12 MHz on osc1 */
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
|
|
static struct at73c213_board_info at73c213_data = {
|
|
|
|
.ssc_id = 0,
|
|
|
|
@@ -130,14 +137,23 @@
|
|
|
|
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
|
|
#endif
|
|
|
|
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
|
|
- at32_add_device_mci(0);
|
2008-04-23 23:25:37 +03:00
|
|
|
+ at32_add_device_mci(0, NULL);
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif
|
|
|
|
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
|
|
|
|
- fbmem_start, fbmem_size);
|
|
|
|
+ fbmem_start, fbmem_size, 0);
|
|
|
|
at32_add_device_usba(0, NULL);
|
2008-04-23 23:25:37 +03:00
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
2008-07-05 17:49:07 +03:00
|
|
|
+ at32_add_device_ac97c(0, NULL);
|
2008-04-23 23:25:37 +03:00
|
|
|
+#else
|
|
|
|
+ at32_add_device_abdac(0);
|
|
|
|
+#endif
|
2008-06-13 00:13:40 +03:00
|
|
|
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
|
|
at32_add_device_ssc(0, ATMEL_SSC_TX);
|
|
|
|
#endif
|
2008-04-23 23:25:37 +03:00
|
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
|
|
|
|
+ at32_add_device_psif(0);
|
|
|
|
+ at32_add_device_psif(1);
|
|
|
|
+#endif
|
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
atstk1000_setup_j2_leds();
|
|
|
|
atstk1004_setup_extdac();
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/configs/atngw100_defconfig
|
|
|
|
+++ b/arch/avr32/configs/atngw100_defconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,7 +1,7 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
|
|
|
# Automatically generated make config: don't edit
|
2008-06-13 00:13:40 +03:00
|
|
|
-# Linux kernel version: 2.6.24-rc7
|
|
|
|
-# Wed Jan 9 23:20:41 2008
|
|
|
|
+# Linux kernel version: 2.6.25.4
|
|
|
|
+# Wed Jun 11 15:23:36 2008
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
|
|
|
CONFIG_AVR32=y
|
|
|
|
CONFIG_GENERIC_GPIO=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -13,10 +13,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
CONFIG_GENERIC_TIME=y
|
2008-04-23 23:25:37 +03:00
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
CONFIG_GENERIC_BUG=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -37,17 +37,15 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_BSD_PROCESS_ACCT=y
|
|
|
|
CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
|
|
# CONFIG_TASKSTATS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_USER_NS is not set
|
|
|
|
-# CONFIG_PID_NS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_AUDIT is not set
|
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
CONFIG_LOG_BUF_SHIFT=14
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_CGROUPS is not set
|
|
|
|
-CONFIG_FAIR_GROUP_SCHED=y
|
|
|
|
-CONFIG_FAIR_USER_SCHED=y
|
|
|
|
-# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
|
|
+# CONFIG_GROUP_SCHED is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_SYSFS_DEPRECATED_V2=y
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_RELAY is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_NAMESPACES is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_BLK_DEV_INITRD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
|
|
@@ -61,11 +59,13 @@
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
CONFIG_BUG=y
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
+# CONFIG_COMPAT_BRK is not set
|
|
|
|
# CONFIG_BASE_FULL is not set
|
|
|
|
CONFIG_FUTEX=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_ANON_INODES=y
|
|
|
|
CONFIG_EPOLL=y
|
|
|
|
CONFIG_SIGNALFD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_TIMERFD=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_EVENTFD=y
|
|
|
|
CONFIG_SHMEM=y
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -73,6 +73,14 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SLAB is not set
|
|
|
|
CONFIG_SLUB=y
|
|
|
|
# CONFIG_SLOB is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_PROFILING=y
|
|
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
+CONFIG_OPROFILE=m
|
|
|
|
+CONFIG_HAVE_OPROFILE=y
|
|
|
|
+CONFIG_KPROBES=y
|
|
|
|
+CONFIG_HAVE_KPROBES=y
|
|
|
|
+# CONFIG_HAVE_KRETPROBES is not set
|
|
|
|
+CONFIG_PROC_PAGE_MONITOR=y
|
|
|
|
CONFIG_SLABINFO=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_RT_MUTEXES=y
|
|
|
|
# CONFIG_TINY_SHMEM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -101,10 +109,15 @@
|
|
|
|
CONFIG_DEFAULT_CFQ=y
|
|
|
|
# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
CONFIG_DEFAULT_IOSCHED="cfq"
|
|
|
|
+CONFIG_CLASSIC_RCU=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
|
|
|
# System Type and features
|
|
|
|
#
|
|
|
|
+CONFIG_TICK_ONESHOT=y
|
|
|
|
+CONFIG_NO_HZ=y
|
|
|
|
+CONFIG_HIGH_RES_TIMERS=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
|
|
CONFIG_SUBARCH_AVR32B=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_MMU=y
|
|
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -113,6 +126,7 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_CPU_AT32AP7000=y
|
|
|
|
# CONFIG_BOARD_ATSTK1000 is not set
|
|
|
|
CONFIG_BOARD_ATNGW100=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -121,6 +135,7 @@
|
|
|
|
# CONFIG_AP700X_32_BIT_SMC is not set
|
|
|
|
CONFIG_AP700X_16_BIT_SMC=y
|
|
|
|
# CONFIG_AP700X_8_BIT_SMC is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_GPIO_DEV=y
|
|
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -146,16 +161,26 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_ZONE_DMA_FLAG=0
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_VIRT_TO_BUS=y
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_NMI_DEBUGGING=y
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_DW_DMAC=y
|
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
# CONFIG_HZ_300 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
CONFIG_HZ=250
|
|
|
|
+# CONFIG_SCHED_HRTICK is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_CMDLINE=""
|
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Power management options
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
+CONFIG_PM=y
|
|
|
|
+# CONFIG_PM_LEGACY is not set
|
|
|
|
+# CONFIG_PM_DEBUG is not set
|
|
|
|
+CONFIG_PM_SLEEP=y
|
|
|
|
+CONFIG_SUSPEND=y
|
|
|
|
+CONFIG_SUSPEND_FREEZER=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# CPU Frequency scaling
|
|
|
|
@@ -164,9 +189,9 @@
|
|
|
|
CONFIG_CPU_FREQ_TABLE=y
|
|
|
|
# CONFIG_CPU_FREQ_DEBUG is not set
|
|
|
|
# CONFIG_CPU_FREQ_STAT is not set
|
|
|
|
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
|
|
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
|
|
@@ -202,6 +227,7 @@
|
|
|
|
CONFIG_XFRM_USER=y
|
|
|
|
# CONFIG_XFRM_SUB_POLICY is not set
|
|
|
|
# CONFIG_XFRM_MIGRATE is not set
|
|
|
|
+# CONFIG_XFRM_STATISTICS is not set
|
|
|
|
CONFIG_NET_KEY=y
|
|
|
|
# CONFIG_NET_KEY_MIGRATE is not set
|
|
|
|
CONFIG_INET=y
|
|
|
|
@@ -260,82 +286,33 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
|
|
CONFIG_NETFILTER=y
|
|
|
|
# CONFIG_NETFILTER_DEBUG is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_BRIDGE_NETFILTER=y
|
|
|
|
+# CONFIG_NETFILTER_ADVANCED is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
|
|
|
|
#
|
|
|
|
# Core Netfilter Configuration
|
2008-06-13 00:13:40 +03:00
|
|
|
#
|
|
|
|
-# CONFIG_NETFILTER_NETLINK is not set
|
|
|
|
-CONFIG_NF_CONNTRACK_ENABLED=m
|
|
|
|
+CONFIG_NETFILTER_NETLINK=m
|
|
|
|
+CONFIG_NETFILTER_NETLINK_LOG=m
|
|
|
|
CONFIG_NF_CONNTRACK=m
|
|
|
|
-CONFIG_NF_CT_ACCT=y
|
|
|
|
-CONFIG_NF_CONNTRACK_MARK=y
|
|
|
|
-# CONFIG_NF_CONNTRACK_EVENTS is not set
|
|
|
|
-CONFIG_NF_CT_PROTO_GRE=m
|
|
|
|
-# CONFIG_NF_CT_PROTO_SCTP is not set
|
|
|
|
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
|
|
|
|
-CONFIG_NF_CONNTRACK_AMANDA=m
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_NF_CONNTRACK_FTP=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_NF_CONNTRACK_H323=m
|
|
|
|
CONFIG_NF_CONNTRACK_IRC=m
|
|
|
|
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
|
|
|
|
-CONFIG_NF_CONNTRACK_PPTP=m
|
|
|
|
-CONFIG_NF_CONNTRACK_SANE=m
|
|
|
|
CONFIG_NF_CONNTRACK_SIP=m
|
|
|
|
-CONFIG_NF_CONNTRACK_TFTP=m
|
|
|
|
+CONFIG_NF_CT_NETLINK=m
|
|
|
|
CONFIG_NETFILTER_XTABLES=y
|
|
|
|
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
|
|
|
|
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
|
|
|
|
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
|
|
|
|
CONFIG_NETFILTER_XT_TARGET_MARK=m
|
|
|
|
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
|
|
|
|
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_ESP=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_MAC=m
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_NETFILTER_XT_MATCH_MARK=m
|
|
|
|
CONFIG_NETFILTER_XT_MATCH_POLICY=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_REALM=m
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
|
|
|
|
CONFIG_NETFILTER_XT_MATCH_STATE=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_STRING=m
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
|
|
|
|
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
|
|
|
|
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
|
|
|
|
|
|
|
|
#
|
|
|
|
# IP: Netfilter Configuration
|
|
|
|
#
|
|
|
|
CONFIG_NF_CONNTRACK_IPV4=m
|
|
|
|
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
|
|
|
|
-# CONFIG_IP_NF_QUEUE is not set
|
|
|
|
CONFIG_IP_NF_IPTABLES=m
|
|
|
|
-CONFIG_IP_NF_MATCH_IPRANGE=m
|
|
|
|
-CONFIG_IP_NF_MATCH_TOS=m
|
|
|
|
-CONFIG_IP_NF_MATCH_RECENT=m
|
|
|
|
-CONFIG_IP_NF_MATCH_ECN=m
|
|
|
|
-CONFIG_IP_NF_MATCH_AH=m
|
|
|
|
-CONFIG_IP_NF_MATCH_TTL=m
|
|
|
|
-CONFIG_IP_NF_MATCH_OWNER=m
|
|
|
|
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
|
|
|
|
CONFIG_IP_NF_FILTER=m
|
|
|
|
CONFIG_IP_NF_TARGET_REJECT=m
|
|
|
|
CONFIG_IP_NF_TARGET_LOG=m
|
|
|
|
@@ -343,54 +320,25 @@
|
|
|
|
CONFIG_NF_NAT=m
|
|
|
|
CONFIG_NF_NAT_NEEDED=y
|
|
|
|
CONFIG_IP_NF_TARGET_MASQUERADE=m
|
|
|
|
-CONFIG_IP_NF_TARGET_REDIRECT=m
|
|
|
|
-CONFIG_IP_NF_TARGET_NETMAP=m
|
|
|
|
-CONFIG_IP_NF_TARGET_SAME=m
|
|
|
|
-CONFIG_NF_NAT_SNMP_BASIC=m
|
|
|
|
-CONFIG_NF_NAT_PROTO_GRE=m
|
|
|
|
CONFIG_NF_NAT_FTP=m
|
|
|
|
CONFIG_NF_NAT_IRC=m
|
|
|
|
-CONFIG_NF_NAT_TFTP=m
|
|
|
|
-CONFIG_NF_NAT_AMANDA=m
|
|
|
|
-CONFIG_NF_NAT_PPTP=m
|
|
|
|
-CONFIG_NF_NAT_H323=m
|
|
|
|
+# CONFIG_NF_NAT_TFTP is not set
|
|
|
|
+# CONFIG_NF_NAT_AMANDA is not set
|
|
|
|
+# CONFIG_NF_NAT_PPTP is not set
|
|
|
|
+# CONFIG_NF_NAT_H323 is not set
|
|
|
|
CONFIG_NF_NAT_SIP=m
|
|
|
|
CONFIG_IP_NF_MANGLE=m
|
|
|
|
-CONFIG_IP_NF_TARGET_TOS=m
|
|
|
|
-CONFIG_IP_NF_TARGET_ECN=m
|
|
|
|
-CONFIG_IP_NF_TARGET_TTL=m
|
|
|
|
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
|
|
|
|
-CONFIG_IP_NF_RAW=m
|
|
|
|
-CONFIG_IP_NF_ARPTABLES=m
|
|
|
|
-CONFIG_IP_NF_ARPFILTER=m
|
|
|
|
-CONFIG_IP_NF_ARP_MANGLE=m
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
|
|
|
|
+# IPv6: Netfilter Configuration
|
|
|
|
#
|
|
|
|
CONFIG_NF_CONNTRACK_IPV6=m
|
|
|
|
-CONFIG_IP6_NF_QUEUE=m
|
|
|
|
CONFIG_IP6_NF_IPTABLES=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_RT=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_OPTS=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_FRAG=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_HL=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_OWNER=m
|
|
|
|
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_AH=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_MH=m
|
|
|
|
-CONFIG_IP6_NF_MATCH_EUI64=m
|
|
|
|
CONFIG_IP6_NF_FILTER=m
|
|
|
|
CONFIG_IP6_NF_TARGET_LOG=m
|
|
|
|
CONFIG_IP6_NF_TARGET_REJECT=m
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_IP6_NF_MANGLE=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_IP6_NF_TARGET_HL=m
|
|
|
|
-CONFIG_IP6_NF_RAW=m
|
|
|
|
-
|
|
|
|
-#
|
|
|
|
-# Bridge: Netfilter Configuration
|
|
|
|
-#
|
|
|
|
-# CONFIG_BRIDGE_NF_EBTABLES is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_IP_DCCP is not set
|
|
|
|
# CONFIG_IP_SCTP is not set
|
|
|
|
# CONFIG_TIPC is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -407,7 +355,6 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_ECONET is not set
|
|
|
|
# CONFIG_WAN_ROUTER is not set
|
|
|
|
# CONFIG_NET_SCHED is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_NET_CLS_ROUTE=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Network testing
|
|
|
|
@@ -415,6 +362,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_NET_PKTGEN is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_NET_TCPPROBE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_HAMRADIO is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_CAN is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_IRDA is not set
|
|
|
|
# CONFIG_BT is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_AF_RXRPC is not set
|
|
|
|
@@ -531,11 +479,18 @@
|
|
|
|
CONFIG_BLK_DEV_RAM=m
|
|
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
|
|
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
|
|
+# CONFIG_BLK_DEV_XIP is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
# CONFIG_ATA_OVER_ETH is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_MISC_DEVICES is not set
|
|
|
|
-# CONFIG_IDE is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
+CONFIG_MISC_DEVICES=y
|
|
|
|
+# CONFIG_ATMEL_PWM is not set
|
|
|
|
+CONFIG_ATMEL_TCLIB=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
|
|
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
|
|
+# CONFIG_ATMEL_SSC is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ENCLOSURE_SERVICES is not set
|
|
|
|
+# CONFIG_HAVE_IDE is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SCSI device support
|
|
|
|
@@ -568,11 +523,13 @@
|
|
|
|
# CONFIG_SMSC_PHY is not set
|
|
|
|
# CONFIG_BROADCOM_PHY is not set
|
|
|
|
# CONFIG_ICPLUS_PHY is not set
|
|
|
|
+# CONFIG_REALTEK_PHY is not set
|
|
|
|
# CONFIG_FIXED_PHY is not set
|
|
|
|
# CONFIG_MDIO_BITBANG is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_NET_ETHERNET=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_MII is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_MACB=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ENC28J60 is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
|
|
@@ -599,7 +556,6 @@
|
|
|
|
# CONFIG_PPPOL2TP is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SLIP is not set
|
|
|
|
CONFIG_SLHC=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_SHAPER is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_NETCONSOLE is not set
|
|
|
|
# CONFIG_NETPOLL is not set
|
|
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -633,6 +589,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
|
|
|
CONFIG_SERIAL_ATMEL=y
|
|
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -640,8 +597,6 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_LEGACY_PTYS is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
# CONFIG_HW_RANDOM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_RTC is not set
|
|
|
|
-# CONFIG_GEN_RTC is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
# CONFIG_RAW_DRIVER is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
# CONFIG_TCG_TPM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -659,6 +614,7 @@
|
|
|
|
#
|
|
|
|
# I2C Hardware Bus support
|
|
|
|
#
|
|
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
|
|
CONFIG_I2C_GPIO=m
|
|
|
|
# CONFIG_I2C_OCORES is not set
|
|
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
@@ -669,13 +625,12 @@
|
|
|
|
#
|
|
|
|
# Miscellaneous I2C Chip support
|
|
|
|
#
|
|
|
|
-# CONFIG_SENSORS_DS1337 is not set
|
|
|
|
-# CONFIG_SENSORS_DS1374 is not set
|
|
|
|
# CONFIG_DS1682 is not set
|
|
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
|
|
-# CONFIG_SENSORS_PCA9539 is not set
|
|
|
|
+# CONFIG_PCF8575 is not set
|
|
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
|
|
+# CONFIG_TPS65010 is not set
|
|
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
|
|
# CONFIG_SENSORS_TSL2550 is not set
|
|
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
@@ -702,9 +657,27 @@
|
|
|
|
# CONFIG_SPI_AT25 is not set
|
|
|
|
CONFIG_SPI_SPIDEV=m
|
|
|
|
# CONFIG_SPI_TLE62X0 is not set
|
|
|
|
+CONFIG_HAVE_GPIO_LIB=y
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# GPIO Support
|
2007-07-13 12:56:05 +03:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_DEBUG_GPIO is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# I2C GPIO expanders:
|
2007-07-13 12:56:05 +03:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_GPIO_PCA953X is not set
|
|
|
|
+# CONFIG_GPIO_PCF857X is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# SPI GPIO expanders:
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_GPIO_MCP23S08 is not set
|
|
|
|
# CONFIG_W1 is not set
|
|
|
|
# CONFIG_POWER_SUPPLY is not set
|
|
|
|
# CONFIG_HWMON is not set
|
|
|
|
+# CONFIG_THERMAL is not set
|
|
|
|
CONFIG_WATCHDOG=y
|
|
|
|
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -757,10 +730,6 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
|
|
|
-
|
|
|
|
-#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# USB Gadget Support
|
2008-02-07 22:08:19 +02:00
|
|
|
-#
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_USB_GADGET=y
|
|
|
|
# CONFIG_USB_GADGET_DEBUG is not set
|
|
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
|
|
@@ -787,21 +756,24 @@
|
|
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
|
|
CONFIG_USB_G_SERIAL=m
|
|
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
|
|
-CONFIG_MMC=m
|
|
|
|
+# CONFIG_USB_G_PRINTER is not set
|
|
|
|
+CONFIG_MMC=y
|
|
|
|
# CONFIG_MMC_DEBUG is not set
|
|
|
|
# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# MMC/SD Card Drivers
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_MMC_BLOCK=m
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_MMC_BLOCK=y
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_MMC_BLOCK_BOUNCE=y
|
|
|
|
# CONFIG_SDIO_UART is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# MMC/SD Host Controller Drivers
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_MMC_ATMELMCI=y
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_MMC_SPI=m
|
|
|
|
+# CONFIG_MEMSTICK is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_NEW_LEDS=y
|
|
|
|
CONFIG_LEDS_CLASS=y
|
2007-07-13 12:56:05 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -844,19 +816,22 @@
|
|
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
+# CONFIG_RTC_DRV_S35390A is not set
|
2007-10-16 15:22:57 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SPI RTC drivers
|
2007-10-16 15:22:57 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
+# CONFIG_RTC_DRV_R9701 is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Platform RTC drivers
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_DS1511 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
-# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T59 is not set
|
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
@@ -874,25 +849,23 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
|
|
|
# File systems
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_EXT2_FS=m
|
|
|
|
+CONFIG_EXT2_FS=y
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
|
|
# CONFIG_EXT2_FS_XIP is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_EXT3_FS=m
|
|
|
|
+CONFIG_EXT3_FS=y
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_EXT3_FS_XATTR is not set
|
|
|
|
# CONFIG_EXT4DEV_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_JBD=m
|
|
|
|
+CONFIG_JBD=y
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_REISERFS_FS is not set
|
|
|
|
# CONFIG_JFS_FS is not set
|
|
|
|
# CONFIG_FS_POSIX_ACL is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_XFS_FS is not set
|
|
|
|
# CONFIG_GFS2_FS is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_OCFS2_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_MINIX_FS is not set
|
|
|
|
-# CONFIG_ROMFS_FS is not set
|
|
|
|
+# CONFIG_DNOTIFY is not set
|
|
|
|
CONFIG_INOTIFY=y
|
|
|
|
CONFIG_INOTIFY_USER=y
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_QUOTA is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_DNOTIFY is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_AUTOFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
|
|
CONFIG_FUSE_FS=m
|
|
|
|
@@ -923,7 +896,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_TMPFS=y
|
|
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
|
|
# CONFIG_HUGETLB_PAGE is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_CONFIGFS_FS=m
|
|
|
|
+CONFIG_CONFIGFS_FS=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Miscellaneous filesystems
|
|
|
|
@@ -948,8 +921,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
# CONFIG_CRAMFS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_VXFS_FS is not set
|
|
|
|
+# CONFIG_MINIX_FS is not set
|
|
|
|
# CONFIG_HPFS_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_QNX4FS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ROMFS_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SYSV_FS is not set
|
|
|
|
# CONFIG_UFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_NETWORK_FILESYSTEMS=y
|
|
|
|
@@ -1030,11 +1005,6 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_NLS_KOI8_U is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_NLS_UTF8=m
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_DLM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_INSTRUMENTATION=y
|
|
|
|
-CONFIG_PROFILING=y
|
|
|
|
-CONFIG_OPROFILE=m
|
|
|
|
-CONFIG_KPROBES=y
|
|
|
|
-# CONFIG_MARKERS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
|
|
|
# Kernel hacking
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1053,6 +1023,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SCHEDSTATS is not set
|
|
|
|
# CONFIG_TIMER_STATS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_SLUB_DEBUG_ON is not set
|
|
|
|
+# CONFIG_SLUB_STATS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1069,9 +1040,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_DEBUG_LIST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_DEBUG_SG is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_FRAME_POINTER=y
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_FORCED_INLINING is not set
|
|
|
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_KPROBES_SANITY_TEST is not set
|
|
|
|
+# CONFIG_BACKTRACE_SELF_TEST is not set
|
|
|
|
# CONFIG_LKDTM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_FAULT_INJECTION is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_SAMPLES is not set
|
|
|
|
@@ -1084,7 +1056,9 @@
|
|
|
|
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_CRYPTO=y
|
|
|
|
CONFIG_CRYPTO_ALGAPI=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_CRYPTO_AEAD=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_CRYPTO_BLKCIPHER=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_CRYPTO_SEQIV is not set
|
|
|
|
CONFIG_CRYPTO_HASH=y
|
|
|
|
CONFIG_CRYPTO_MANAGER=y
|
|
|
|
CONFIG_CRYPTO_HMAC=y
|
|
|
|
@@ -1103,6 +1077,9 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_CRYPTO_PCBC=m
|
|
|
|
# CONFIG_CRYPTO_LRW is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_CRYPTO_XTS is not set
|
|
|
|
+# CONFIG_CRYPTO_CTR is not set
|
|
|
|
+# CONFIG_CRYPTO_GCM is not set
|
|
|
|
+# CONFIG_CRYPTO_CCM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_CRYPTO_CRYPTD is not set
|
|
|
|
CONFIG_CRYPTO_DES=y
|
|
|
|
# CONFIG_CRYPTO_FCRYPT is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1117,12 +1094,14 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_CRYPTO_KHAZAD is not set
|
|
|
|
# CONFIG_CRYPTO_ANUBIS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_CRYPTO_SEED is not set
|
|
|
|
+# CONFIG_CRYPTO_SALSA20 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_CRYPTO_DEFLATE=y
|
|
|
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
|
|
# CONFIG_CRYPTO_CRC32C is not set
|
|
|
|
# CONFIG_CRYPTO_CAMELLIA is not set
|
|
|
|
# CONFIG_CRYPTO_TEST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_CRYPTO_AUTHENC is not set
|
|
|
|
+CONFIG_CRYPTO_AUTHENC=y
|
|
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
|
|
CONFIG_CRYPTO_HW=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1137,10 +1116,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_LIBCRC32C is not set
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_TEXTSEARCH=y
|
|
|
|
-CONFIG_TEXTSEARCH_KMP=m
|
|
|
|
-CONFIG_TEXTSEARCH_BM=m
|
|
|
|
-CONFIG_TEXTSEARCH_FSM=m
|
|
|
|
+CONFIG_GENERIC_ALLOCATOR=y
|
|
|
|
CONFIG_PLIST=y
|
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
CONFIG_HAS_IOPORT=y
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/configs/atstk1002_defconfig
|
|
|
|
+++ b/arch/avr32/configs/atstk1002_defconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,7 +1,7 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
|
|
|
# Automatically generated make config: don't edit
|
2008-06-13 00:13:40 +03:00
|
|
|
-# Linux kernel version: 2.6.24-rc7
|
|
|
|
-# Wed Jan 9 23:07:43 2008
|
|
|
|
+# Linux kernel version: 2.6.25.4
|
|
|
|
+# Wed Jun 11 15:29:18 2008
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
|
|
|
CONFIG_AVR32=y
|
|
|
|
CONFIG_GENERIC_GPIO=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -13,10 +13,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
CONFIG_GENERIC_TIME=y
|
2008-04-23 23:25:37 +03:00
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
CONFIG_GENERIC_BUG=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -36,15 +36,15 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_POSIX_MQUEUE=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
|
|
# CONFIG_TASKSTATS is not set
|
|
|
|
-# CONFIG_USER_NS is not set
|
|
|
|
-# CONFIG_PID_NS is not set
|
|
|
|
# CONFIG_AUDIT is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
CONFIG_LOG_BUF_SHIFT=14
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_CGROUPS is not set
|
|
|
|
-# CONFIG_FAIR_GROUP_SCHED is not set
|
|
|
|
+# CONFIG_GROUP_SCHED is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_SYSFS_DEPRECATED_V2=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_RELAY=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_NAMESPACES is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_BLK_DEV_INITRD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
|
|
@@ -58,11 +58,13 @@
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
CONFIG_BUG=y
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
+# CONFIG_COMPAT_BRK is not set
|
|
|
|
# CONFIG_BASE_FULL is not set
|
|
|
|
CONFIG_FUTEX=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_ANON_INODES=y
|
|
|
|
CONFIG_EPOLL=y
|
|
|
|
CONFIG_SIGNALFD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_TIMERFD=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_EVENTFD=y
|
|
|
|
CONFIG_SHMEM=y
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -70,6 +72,14 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SLAB is not set
|
|
|
|
CONFIG_SLUB=y
|
|
|
|
# CONFIG_SLOB is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_PROFILING=y
|
|
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
+CONFIG_OPROFILE=m
|
|
|
|
+CONFIG_HAVE_OPROFILE=y
|
|
|
|
+CONFIG_KPROBES=y
|
|
|
|
+CONFIG_HAVE_KPROBES=y
|
|
|
|
+# CONFIG_HAVE_KRETPROBES is not set
|
|
|
|
+CONFIG_PROC_PAGE_MONITOR=y
|
|
|
|
CONFIG_SLABINFO=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_RT_MUTEXES=y
|
|
|
|
# CONFIG_TINY_SHMEM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -98,10 +108,15 @@
|
|
|
|
CONFIG_DEFAULT_CFQ=y
|
|
|
|
# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
CONFIG_DEFAULT_IOSCHED="cfq"
|
|
|
|
+CONFIG_CLASSIC_RCU=y
|
2007-07-13 12:56:05 +03:00
|
|
|
|
|
|
|
#
|
|
|
|
# System Type and features
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
|
|
|
+CONFIG_TICK_ONESHOT=y
|
|
|
|
+CONFIG_NO_HZ=y
|
|
|
|
+CONFIG_HIGH_RES_TIMERS=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
|
|
CONFIG_SUBARCH_AVR32B=y
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_MMU=y
|
|
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -113,12 +128,16 @@
|
|
|
|
CONFIG_BOARD_ATSTK1002=y
|
|
|
|
# CONFIG_BOARD_ATSTK1003 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1004 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1006 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
|
|
|
|
CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -127,6 +146,7 @@
|
|
|
|
# CONFIG_AP700X_32_BIT_SMC is not set
|
|
|
|
CONFIG_AP700X_16_BIT_SMC=y
|
|
|
|
# CONFIG_AP700X_8_BIT_SMC is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_GPIO_DEV=y
|
|
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -152,16 +172,26 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_ZONE_DMA_FLAG=0
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_VIRT_TO_BUS=y
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_NMI_DEBUGGING=y
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_DW_DMAC=y
|
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
# CONFIG_HZ_300 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
CONFIG_HZ=250
|
|
|
|
+# CONFIG_SCHED_HRTICK is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
CONFIG_CMDLINE=""
|
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Power management options
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
+CONFIG_PM=y
|
|
|
|
+# CONFIG_PM_LEGACY is not set
|
|
|
|
+# CONFIG_PM_DEBUG is not set
|
|
|
|
+CONFIG_PM_SLEEP=y
|
|
|
|
+CONFIG_SUSPEND=y
|
|
|
|
+CONFIG_SUSPEND_FREEZER=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# CPU Frequency scaling
|
|
|
|
@@ -170,9 +200,9 @@
|
|
|
|
CONFIG_CPU_FREQ_TABLE=y
|
|
|
|
# CONFIG_CPU_FREQ_DEBUG is not set
|
|
|
|
# CONFIG_CPU_FREQ_STAT is not set
|
|
|
|
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
|
|
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
|
|
@@ -208,6 +238,7 @@
|
|
|
|
CONFIG_XFRM_USER=m
|
|
|
|
# CONFIG_XFRM_SUB_POLICY is not set
|
|
|
|
# CONFIG_XFRM_MIGRATE is not set
|
|
|
|
+# CONFIG_XFRM_STATISTICS is not set
|
|
|
|
CONFIG_NET_KEY=m
|
|
|
|
# CONFIG_NET_KEY_MIGRATE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_INET=y
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -279,6 +310,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_NET_PKTGEN is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_NET_TCPPROBE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_HAMRADIO is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_CAN is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_IRDA is not set
|
|
|
|
# CONFIG_BT is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_AF_RXRPC is not set
|
|
|
|
@@ -395,13 +427,18 @@
|
|
|
|
CONFIG_BLK_DEV_RAM=m
|
|
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
|
|
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
|
|
+# CONFIG_BLK_DEV_XIP is not set
|
|
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
|
|
CONFIG_MISC_DEVICES=y
|
|
|
|
+CONFIG_ATMEL_PWM=m
|
|
|
|
+CONFIG_ATMEL_TCLIB=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
|
|
|
|
# CONFIG_EEPROM_93CX6 is not set
|
|
|
|
CONFIG_ATMEL_SSC=m
|
|
|
|
-# CONFIG_IDE is not set
|
|
|
|
+# CONFIG_ENCLOSURE_SERVICES is not set
|
|
|
|
+# CONFIG_HAVE_IDE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SCSI device support
|
|
|
|
@@ -444,6 +481,7 @@
|
|
|
|
# CONFIG_SCSI_LOWLEVEL is not set
|
|
|
|
CONFIG_ATA=m
|
|
|
|
# CONFIG_ATA_NONSTANDARD is not set
|
|
|
|
+# CONFIG_SATA_MV is not set
|
|
|
|
CONFIG_PATA_AT32=m
|
|
|
|
# CONFIG_PATA_PLATFORM is not set
|
|
|
|
# CONFIG_MD is not set
|
|
|
|
@@ -469,11 +507,13 @@
|
|
|
|
# CONFIG_SMSC_PHY is not set
|
|
|
|
# CONFIG_BROADCOM_PHY is not set
|
|
|
|
# CONFIG_ICPLUS_PHY is not set
|
|
|
|
+# CONFIG_REALTEK_PHY is not set
|
|
|
|
# CONFIG_FIXED_PHY is not set
|
|
|
|
# CONFIG_MDIO_BITBANG is not set
|
|
|
|
CONFIG_NET_ETHERNET=y
|
|
|
|
# CONFIG_MII is not set
|
|
|
|
CONFIG_MACB=y
|
|
|
|
+# CONFIG_ENC28J60 is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
|
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
|
|
@@ -500,7 +540,6 @@
|
|
|
|
# CONFIG_PPPOL2TP is not set
|
|
|
|
# CONFIG_SLIP is not set
|
|
|
|
CONFIG_SLHC=m
|
|
|
|
-# CONFIG_SHAPER is not set
|
|
|
|
# CONFIG_NETCONSOLE is not set
|
|
|
|
# CONFIG_NETPOLL is not set
|
|
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
@@ -568,6 +607,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_SERIAL_ATMEL=y
|
|
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
@@ -575,8 +615,6 @@
|
|
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
# CONFIG_HW_RANDOM is not set
|
|
|
|
-# CONFIG_RTC is not set
|
|
|
|
-# CONFIG_GEN_RTC is not set
|
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
# CONFIG_RAW_DRIVER is not set
|
|
|
|
# CONFIG_TCG_TPM is not set
|
|
|
|
@@ -594,6 +632,7 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# I2C Hardware Bus support
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
|
|
CONFIG_I2C_GPIO=m
|
|
|
|
# CONFIG_I2C_OCORES is not set
|
|
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
@@ -604,13 +643,12 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Miscellaneous I2C Chip support
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_SENSORS_DS1337 is not set
|
|
|
|
-# CONFIG_SENSORS_DS1374 is not set
|
|
|
|
# CONFIG_DS1682 is not set
|
|
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
|
|
-# CONFIG_SENSORS_PCA9539 is not set
|
|
|
|
+# CONFIG_PCF8575 is not set
|
|
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
|
|
+# CONFIG_TPS65010 is not set
|
|
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
|
|
# CONFIG_SENSORS_TSL2550 is not set
|
|
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
@@ -637,9 +675,27 @@
|
|
|
|
# CONFIG_SPI_AT25 is not set
|
|
|
|
CONFIG_SPI_SPIDEV=m
|
|
|
|
# CONFIG_SPI_TLE62X0 is not set
|
|
|
|
+CONFIG_HAVE_GPIO_LIB=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# GPIO Support
|
|
|
|
+#
|
|
|
|
+# CONFIG_DEBUG_GPIO is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# I2C GPIO expanders:
|
|
|
|
+#
|
|
|
|
+# CONFIG_GPIO_PCA953X is not set
|
|
|
|
+# CONFIG_GPIO_PCF857X is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# SPI GPIO expanders:
|
|
|
|
+#
|
|
|
|
+# CONFIG_GPIO_MCP23S08 is not set
|
|
|
|
# CONFIG_W1 is not set
|
|
|
|
# CONFIG_POWER_SUPPLY is not set
|
|
|
|
# CONFIG_HWMON is not set
|
|
|
|
+# CONFIG_THERMAL is not set
|
|
|
|
CONFIG_WATCHDOG=y
|
|
|
|
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -732,12 +788,18 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Generic devices
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_SND_AC97_CODEC=m
|
|
|
|
# CONFIG_SND_DUMMY is not set
|
|
|
|
# CONFIG_SND_MTPAV is not set
|
|
|
|
# CONFIG_SND_SERIAL_U16550 is not set
|
|
|
|
# CONFIG_SND_MPU401 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# AVR32 devices
|
2008-04-23 23:25:37 +03:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_SND_ATMEL_AC97=m
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SPI devices
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_SND_AT73C213=m
|
|
|
|
@@ -753,9 +815,14 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# ALSA SoC audio for Freescale SOCs
|
|
|
|
+#
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
# Open Sound System
|
|
|
|
#
|
|
|
|
# CONFIG_SOUND_PRIME is not set
|
|
|
|
+CONFIG_AC97_BUS=m
|
|
|
|
# CONFIG_HID_SUPPORT is not set
|
|
|
|
CONFIG_USB_SUPPORT=y
|
|
|
|
# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
|
|
@@ -765,10 +832,6 @@
|
|
|
|
#
|
|
|
|
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
|
|
|
-
|
|
|
|
-#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# USB Gadget Support
|
2008-04-23 23:25:37 +03:00
|
|
|
-#
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_USB_GADGET=y
|
|
|
|
# CONFIG_USB_GADGET_DEBUG is not set
|
|
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
|
|
@@ -796,27 +859,31 @@
|
|
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
|
|
CONFIG_USB_G_SERIAL=m
|
|
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
|
|
-CONFIG_MMC=m
|
|
|
|
+# CONFIG_USB_G_PRINTER is not set
|
|
|
|
+CONFIG_MMC=y
|
|
|
|
# CONFIG_MMC_DEBUG is not set
|
|
|
|
# CONFIG_MMC_UNSAFE_RESUME is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# MMC/SD Card Drivers
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_MMC_BLOCK=m
|
|
|
|
+CONFIG_MMC_BLOCK=y
|
|
|
|
CONFIG_MMC_BLOCK_BOUNCE=y
|
|
|
|
# CONFIG_SDIO_UART is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# MMC/SD Host Controller Drivers
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
|
|
CONFIG_MMC_SPI=m
|
|
|
|
+# CONFIG_MEMSTICK is not set
|
|
|
|
CONFIG_NEW_LEDS=y
|
|
|
|
CONFIG_LEDS_CLASS=m
|
2007-07-13 12:56:05 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# LED drivers
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_LEDS_ATMEL_PWM=m
|
|
|
|
CONFIG_LEDS_GPIO=m
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -853,19 +920,22 @@
|
|
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
+# CONFIG_RTC_DRV_S35390A is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SPI RTC drivers
|
2008-04-23 23:25:37 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
+# CONFIG_RTC_DRV_R9701 is not set
|
|
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Platform RTC drivers
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_DS1511 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
-# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
|
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T59 is not set
|
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
@@ -883,13 +953,13 @@
|
2007-07-13 12:56:05 +03:00
|
|
|
#
|
|
|
|
# File systems
|
|
|
|
#
|
|
|
|
-CONFIG_EXT2_FS=m
|
|
|
|
+CONFIG_EXT2_FS=y
|
|
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
|
|
# CONFIG_EXT2_FS_XIP is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_EXT3_FS=m
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_EXT3_FS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_EXT3_FS_XATTR is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_EXT4DEV_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_JBD=m
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_JBD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_JBD_DEBUG is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_REISERFS_FS is not set
|
|
|
|
# CONFIG_JFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -897,12 +967,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_XFS_FS is not set
|
|
|
|
# CONFIG_GFS2_FS is not set
|
|
|
|
# CONFIG_OCFS2_FS is not set
|
|
|
|
-CONFIG_MINIX_FS=m
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_ROMFS_FS is not set
|
|
|
|
+# CONFIG_DNOTIFY is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_INOTIFY=y
|
|
|
|
CONFIG_INOTIFY_USER=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_QUOTA is not set
|
|
|
|
-# CONFIG_DNOTIFY is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_AUTOFS_FS is not set
|
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_FUSE_FS=m
|
|
|
|
@@ -933,7 +1001,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_TMPFS=y
|
2007-07-13 12:56:05 +03:00
|
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
|
|
# CONFIG_HUGETLB_PAGE is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-# CONFIG_CONFIGFS_FS is not set
|
2007-07-13 12:56:05 +03:00
|
|
|
+CONFIG_CONFIGFS_FS=y
|
|
|
|
|
|
|
|
#
|
|
|
|
# Miscellaneous filesystems
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -957,8 +1025,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
# CONFIG_CRAMFS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_VXFS_FS is not set
|
|
|
|
+CONFIG_MINIX_FS=m
|
|
|
|
# CONFIG_HPFS_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_QNX4FS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ROMFS_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SYSV_FS is not set
|
|
|
|
# CONFIG_UFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_NETWORK_FILESYSTEMS=y
|
|
|
|
@@ -1028,11 +1098,6 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
|
|
CONFIG_NLS_UTF8=m
|
|
|
|
# CONFIG_DLM is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_INSTRUMENTATION=y
|
|
|
|
-CONFIG_PROFILING=y
|
|
|
|
-CONFIG_OPROFILE=m
|
|
|
|
-CONFIG_KPROBES=y
|
|
|
|
-# CONFIG_MARKERS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
|
|
|
# Kernel hacking
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1051,6 +1116,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_SCHEDSTATS is not set
|
|
|
|
# CONFIG_TIMER_STATS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_SLUB_DEBUG_ON is not set
|
|
|
|
+# CONFIG_SLUB_STATS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1067,9 +1133,10 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_DEBUG_LIST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_DEBUG_SG is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
CONFIG_FRAME_POINTER=y
|
2008-06-13 00:13:40 +03:00
|
|
|
-CONFIG_FORCED_INLINING=y
|
|
|
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_KPROBES_SANITY_TEST is not set
|
|
|
|
+# CONFIG_BACKTRACE_SELF_TEST is not set
|
|
|
|
# CONFIG_LKDTM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
# CONFIG_FAULT_INJECTION is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_SAMPLES is not set
|
|
|
|
@@ -1082,7 +1149,9 @@
|
|
|
|
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
|
|
CONFIG_CRYPTO=y
|
|
|
|
CONFIG_CRYPTO_ALGAPI=m
|
|
|
|
+CONFIG_CRYPTO_AEAD=m
|
|
|
|
CONFIG_CRYPTO_BLKCIPHER=m
|
|
|
|
+# CONFIG_CRYPTO_SEQIV is not set
|
|
|
|
CONFIG_CRYPTO_HASH=m
|
|
|
|
CONFIG_CRYPTO_MANAGER=m
|
|
|
|
CONFIG_CRYPTO_HMAC=m
|
|
|
|
@@ -1101,6 +1170,9 @@
|
|
|
|
# CONFIG_CRYPTO_PCBC is not set
|
|
|
|
# CONFIG_CRYPTO_LRW is not set
|
|
|
|
# CONFIG_CRYPTO_XTS is not set
|
|
|
|
+# CONFIG_CRYPTO_CTR is not set
|
|
|
|
+# CONFIG_CRYPTO_GCM is not set
|
|
|
|
+# CONFIG_CRYPTO_CCM is not set
|
|
|
|
# CONFIG_CRYPTO_CRYPTD is not set
|
|
|
|
CONFIG_CRYPTO_DES=m
|
|
|
|
# CONFIG_CRYPTO_FCRYPT is not set
|
|
|
|
@@ -1115,12 +1187,14 @@
|
|
|
|
# CONFIG_CRYPTO_KHAZAD is not set
|
|
|
|
# CONFIG_CRYPTO_ANUBIS is not set
|
|
|
|
# CONFIG_CRYPTO_SEED is not set
|
|
|
|
+# CONFIG_CRYPTO_SALSA20 is not set
|
|
|
|
CONFIG_CRYPTO_DEFLATE=m
|
|
|
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
|
|
# CONFIG_CRYPTO_CRC32C is not set
|
|
|
|
# CONFIG_CRYPTO_CAMELLIA is not set
|
|
|
|
# CONFIG_CRYPTO_TEST is not set
|
|
|
|
-# CONFIG_CRYPTO_AUTHENC is not set
|
|
|
|
+CONFIG_CRYPTO_AUTHENC=m
|
|
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
|
|
# CONFIG_CRYPTO_HW is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1135,6 +1209,7 @@
|
|
|
|
# CONFIG_LIBCRC32C is not set
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
|
|
+CONFIG_GENERIC_ALLOCATOR=y
|
|
|
|
CONFIG_PLIST=y
|
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
CONFIG_HAS_IOPORT=y
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/configs/atstk1003_defconfig
|
|
|
|
+++ b/arch/avr32/configs/atstk1003_defconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,7 +1,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# Automatically generated make config: don't edit
|
|
|
|
-# Linux kernel version: 2.6.24-rc7
|
|
|
|
-# Wed Jan 9 22:54:34 2008
|
|
|
|
+# Linux kernel version: 2.6.25.4
|
|
|
|
+# Wed Jun 11 15:33:36 2008
|
|
|
|
#
|
|
|
|
CONFIG_AVR32=y
|
|
|
|
CONFIG_GENERIC_GPIO=y
|
|
|
|
@@ -13,10 +13,10 @@
|
|
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
CONFIG_GENERIC_TIME=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
|
|
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
|
|
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
CONFIG_GENERIC_BUG=y
|
|
|
|
@@ -39,17 +39,15 @@
|
|
|
|
CONFIG_TASKSTATS=y
|
|
|
|
CONFIG_TASK_DELAY_ACCT=y
|
|
|
|
# CONFIG_TASK_XACCT is not set
|
|
|
|
-# CONFIG_USER_NS is not set
|
|
|
|
-# CONFIG_PID_NS is not set
|
|
|
|
CONFIG_AUDIT=y
|
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
|
|
# CONFIG_CGROUPS is not set
|
|
|
|
-CONFIG_FAIR_GROUP_SCHED=y
|
|
|
|
-CONFIG_FAIR_USER_SCHED=y
|
|
|
|
-# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
|
|
+# CONFIG_GROUP_SCHED is not set
|
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
|
|
+CONFIG_SYSFS_DEPRECATED_V2=y
|
|
|
|
CONFIG_RELAY=y
|
|
|
|
+# CONFIG_NAMESPACES is not set
|
|
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
|
|
@@ -63,11 +61,13 @@
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
CONFIG_BUG=y
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
+# CONFIG_COMPAT_BRK is not set
|
|
|
|
# CONFIG_BASE_FULL is not set
|
|
|
|
CONFIG_FUTEX=y
|
|
|
|
CONFIG_ANON_INODES=y
|
|
|
|
CONFIG_EPOLL=y
|
|
|
|
CONFIG_SIGNALFD=y
|
|
|
|
+CONFIG_TIMERFD=y
|
|
|
|
CONFIG_EVENTFD=y
|
|
|
|
CONFIG_SHMEM=y
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
|
|
@@ -75,6 +75,14 @@
|
|
|
|
# CONFIG_SLAB is not set
|
|
|
|
CONFIG_SLUB=y
|
|
|
|
# CONFIG_SLOB is not set
|
|
|
|
+CONFIG_PROFILING=y
|
|
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
+CONFIG_OPROFILE=m
|
|
|
|
+CONFIG_HAVE_OPROFILE=y
|
|
|
|
+CONFIG_KPROBES=y
|
|
|
|
+CONFIG_HAVE_KPROBES=y
|
|
|
|
+# CONFIG_HAVE_KRETPROBES is not set
|
|
|
|
+CONFIG_PROC_PAGE_MONITOR=y
|
|
|
|
CONFIG_SLABINFO=y
|
|
|
|
CONFIG_RT_MUTEXES=y
|
|
|
|
# CONFIG_TINY_SHMEM is not set
|
|
|
|
@@ -103,10 +111,15 @@
|
|
|
|
CONFIG_DEFAULT_CFQ=y
|
|
|
|
# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
CONFIG_DEFAULT_IOSCHED="cfq"
|
|
|
|
+CONFIG_CLASSIC_RCU=y
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
#
|
2008-06-13 00:13:40 +03:00
|
|
|
# System Type and features
|
|
|
|
#
|
|
|
|
+CONFIG_TICK_ONESHOT=y
|
|
|
|
+CONFIG_NO_HZ=y
|
|
|
|
+CONFIG_HIGH_RES_TIMERS=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
|
|
CONFIG_SUBARCH_AVR32B=y
|
|
|
|
CONFIG_MMU=y
|
|
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
|
|
|
@@ -118,12 +131,16 @@
|
|
|
|
# CONFIG_BOARD_ATSTK1002 is not set
|
|
|
|
CONFIG_BOARD_ATSTK1003=y
|
|
|
|
# CONFIG_BOARD_ATSTK1004 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1006 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
|
|
|
|
CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
|
|
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
|
|
|
|
#
|
|
|
|
@@ -132,6 +149,7 @@
|
|
|
|
# CONFIG_AP700X_32_BIT_SMC is not set
|
|
|
|
CONFIG_AP700X_16_BIT_SMC=y
|
|
|
|
# CONFIG_AP700X_8_BIT_SMC is not set
|
|
|
|
+CONFIG_GPIO_DEV=y
|
|
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
|
|
|
@@ -157,16 +175,26 @@
|
|
|
|
CONFIG_ZONE_DMA_FLAG=0
|
|
|
|
CONFIG_VIRT_TO_BUS=y
|
|
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
|
|
|
+CONFIG_NMI_DEBUGGING=y
|
|
|
|
+CONFIG_DW_DMAC=y
|
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
# CONFIG_HZ_300 is not set
|
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
CONFIG_HZ=250
|
|
|
|
+# CONFIG_SCHED_HRTICK is not set
|
|
|
|
CONFIG_CMDLINE=""
|
|
|
|
|
|
|
|
#
|
|
|
|
# Power management options
|
|
|
|
#
|
|
|
|
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
+CONFIG_PM=y
|
|
|
|
+# CONFIG_PM_LEGACY is not set
|
|
|
|
+# CONFIG_PM_DEBUG is not set
|
|
|
|
+CONFIG_PM_SLEEP=y
|
|
|
|
+CONFIG_SUSPEND=y
|
|
|
|
+CONFIG_SUSPEND_FREEZER=y
|
|
|
|
|
|
|
|
#
|
|
|
|
# CPU Frequency scaling
|
|
|
|
@@ -175,9 +203,9 @@
|
|
|
|
CONFIG_CPU_FREQ_TABLE=y
|
|
|
|
# CONFIG_CPU_FREQ_DEBUG is not set
|
|
|
|
# CONFIG_CPU_FREQ_STAT is not set
|
|
|
|
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
|
|
|
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
|
|
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
|
|
@@ -260,6 +288,7 @@
|
|
|
|
# CONFIG_NET_PKTGEN is not set
|
|
|
|
# CONFIG_NET_TCPPROBE is not set
|
|
|
|
# CONFIG_HAMRADIO is not set
|
|
|
|
+# CONFIG_CAN is not set
|
|
|
|
# CONFIG_IRDA is not set
|
|
|
|
# CONFIG_BT is not set
|
|
|
|
# CONFIG_AF_RXRPC is not set
|
|
|
|
@@ -376,13 +405,18 @@
|
|
|
|
CONFIG_BLK_DEV_RAM=m
|
|
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
|
|
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
|
|
+# CONFIG_BLK_DEV_XIP is not set
|
|
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
|
|
CONFIG_MISC_DEVICES=y
|
|
|
|
+CONFIG_ATMEL_PWM=m
|
|
|
|
+CONFIG_ATMEL_TCLIB=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
|
|
|
|
# CONFIG_EEPROM_93CX6 is not set
|
|
|
|
CONFIG_ATMEL_SSC=m
|
|
|
|
-# CONFIG_IDE is not set
|
|
|
|
+# CONFIG_ENCLOSURE_SERVICES is not set
|
|
|
|
+# CONFIG_HAVE_IDE is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# SCSI device support
|
|
|
|
@@ -427,6 +461,7 @@
|
|
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
|
|
CONFIG_ATA=m
|
|
|
|
# CONFIG_ATA_NONSTANDARD is not set
|
|
|
|
+# CONFIG_SATA_MV is not set
|
|
|
|
CONFIG_PATA_AT32=m
|
|
|
|
# CONFIG_PATA_PLATFORM is not set
|
|
|
|
# CONFIG_MD is not set
|
|
|
|
@@ -460,7 +495,6 @@
|
|
|
|
# CONFIG_PPPOL2TP is not set
|
|
|
|
# CONFIG_SLIP is not set
|
|
|
|
CONFIG_SLHC=m
|
|
|
|
-# CONFIG_SHAPER is not set
|
|
|
|
# CONFIG_NETCONSOLE is not set
|
|
|
|
# CONFIG_NETPOLL is not set
|
|
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
@@ -528,6 +562,7 @@
|
|
|
|
#
|
|
|
|
CONFIG_SERIAL_ATMEL=y
|
|
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
@@ -535,8 +570,6 @@
|
|
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
# CONFIG_HW_RANDOM is not set
|
|
|
|
-# CONFIG_RTC is not set
|
|
|
|
-# CONFIG_GEN_RTC is not set
|
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
# CONFIG_RAW_DRIVER is not set
|
|
|
|
# CONFIG_TCG_TPM is not set
|
|
|
|
@@ -554,6 +587,7 @@
|
|
|
|
#
|
|
|
|
# I2C Hardware Bus support
|
|
|
|
#
|
|
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
|
|
CONFIG_I2C_GPIO=m
|
|
|
|
# CONFIG_I2C_OCORES is not set
|
|
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
@@ -564,13 +598,12 @@
|
|
|
|
#
|
|
|
|
# Miscellaneous I2C Chip support
|
|
|
|
#
|
|
|
|
-# CONFIG_SENSORS_DS1337 is not set
|
|
|
|
-# CONFIG_SENSORS_DS1374 is not set
|
|
|
|
# CONFIG_DS1682 is not set
|
|
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
|
|
-# CONFIG_SENSORS_PCA9539 is not set
|
|
|
|
+# CONFIG_PCF8575 is not set
|
|
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
|
|
+# CONFIG_TPS65010 is not set
|
|
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
|
|
# CONFIG_SENSORS_TSL2550 is not set
|
|
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
@@ -597,9 +630,27 @@
|
|
|
|
# CONFIG_SPI_AT25 is not set
|
|
|
|
CONFIG_SPI_SPIDEV=m
|
|
|
|
# CONFIG_SPI_TLE62X0 is not set
|
|
|
|
+CONFIG_HAVE_GPIO_LIB=y
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# GPIO Support
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_DEBUG_GPIO is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# I2C GPIO expanders:
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_GPIO_PCA953X is not set
|
|
|
|
+# CONFIG_GPIO_PCF857X is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# SPI GPIO expanders:
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_GPIO_MCP23S08 is not set
|
|
|
|
# CONFIG_W1 is not set
|
|
|
|
# CONFIG_POWER_SUPPLY is not set
|
|
|
|
# CONFIG_HWMON is not set
|
|
|
|
+# CONFIG_THERMAL is not set
|
|
|
|
CONFIG_WATCHDOG=y
|
|
|
|
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
|
|
|
|
|
|
@@ -665,12 +716,18 @@
|
|
|
|
#
|
|
|
|
# Generic devices
|
|
|
|
#
|
|
|
|
+CONFIG_SND_AC97_CODEC=m
|
|
|
|
# CONFIG_SND_DUMMY is not set
|
|
|
|
# CONFIG_SND_MTPAV is not set
|
|
|
|
# CONFIG_SND_SERIAL_U16550 is not set
|
|
|
|
# CONFIG_SND_MPU401 is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
+# AVR32 devices
|
|
|
|
+#
|
|
|
|
+CONFIG_SND_ATMEL_AC97=m
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
# SPI devices
|
|
|
|
#
|
|
|
|
CONFIG_SND_AT73C213=m
|
|
|
|
@@ -686,9 +743,14 @@
|
|
|
|
#
|
|
|
|
|
|
|
|
#
|
|
|
|
+# ALSA SoC audio for Freescale SOCs
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+#
|
|
|
|
# Open Sound System
|
|
|
|
#
|
|
|
|
# CONFIG_SOUND_PRIME is not set
|
|
|
|
+CONFIG_AC97_BUS=m
|
|
|
|
# CONFIG_HID_SUPPORT is not set
|
|
|
|
CONFIG_USB_SUPPORT=y
|
|
|
|
# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
|
|
@@ -698,10 +760,6 @@
|
|
|
|
#
|
|
|
|
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
|
|
#
|
|
|
|
-
|
|
|
|
-#
|
|
|
|
-# USB Gadget Support
|
|
|
|
-#
|
|
|
|
CONFIG_USB_GADGET=y
|
|
|
|
# CONFIG_USB_GADGET_DEBUG is not set
|
|
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
|
|
@@ -729,27 +787,31 @@
|
|
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
|
|
CONFIG_USB_G_SERIAL=m
|
|
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
|
|
-CONFIG_MMC=m
|
|
|
|
+# CONFIG_USB_G_PRINTER is not set
|
|
|
|
+CONFIG_MMC=y
|
|
|
|
# CONFIG_MMC_DEBUG is not set
|
|
|
|
# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# MMC/SD Card Drivers
|
|
|
|
#
|
|
|
|
-CONFIG_MMC_BLOCK=m
|
|
|
|
+CONFIG_MMC_BLOCK=y
|
|
|
|
# CONFIG_MMC_BLOCK_BOUNCE is not set
|
|
|
|
# CONFIG_SDIO_UART is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# MMC/SD Host Controller Drivers
|
|
|
|
#
|
|
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
|
|
CONFIG_MMC_SPI=m
|
|
|
|
+# CONFIG_MEMSTICK is not set
|
|
|
|
CONFIG_NEW_LEDS=y
|
|
|
|
CONFIG_LEDS_CLASS=y
|
|
|
|
|
|
|
|
#
|
|
|
|
# LED drivers
|
|
|
|
#
|
|
|
|
+CONFIG_LEDS_ATMEL_PWM=m
|
|
|
|
CONFIG_LEDS_GPIO=y
|
|
|
|
|
|
|
|
#
|
|
|
|
@@ -786,19 +848,22 @@
|
|
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
+# CONFIG_RTC_DRV_S35390A is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# SPI RTC drivers
|
|
|
|
#
|
|
|
|
-# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
+# CONFIG_RTC_DRV_R9701 is not set
|
|
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# Platform RTC drivers
|
|
|
|
#
|
|
|
|
+# CONFIG_RTC_DRV_DS1511 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
-# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
|
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T59 is not set
|
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
@@ -816,13 +881,13 @@
|
|
|
|
#
|
|
|
|
# File systems
|
|
|
|
#
|
|
|
|
-CONFIG_EXT2_FS=m
|
|
|
|
+CONFIG_EXT2_FS=y
|
|
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
|
|
-CONFIG_EXT3_FS=m
|
|
|
|
+CONFIG_EXT3_FS=y
|
|
|
|
# CONFIG_EXT3_FS_XATTR is not set
|
|
|
|
# CONFIG_EXT4DEV_FS is not set
|
|
|
|
-CONFIG_JBD=m
|
|
|
|
+CONFIG_JBD=y
|
|
|
|
# CONFIG_JBD_DEBUG is not set
|
|
|
|
# CONFIG_REISERFS_FS is not set
|
|
|
|
# CONFIG_JFS_FS is not set
|
|
|
|
@@ -830,12 +895,10 @@
|
|
|
|
# CONFIG_XFS_FS is not set
|
|
|
|
# CONFIG_GFS2_FS is not set
|
|
|
|
# CONFIG_OCFS2_FS is not set
|
|
|
|
-# CONFIG_MINIX_FS is not set
|
|
|
|
-# CONFIG_ROMFS_FS is not set
|
|
|
|
+# CONFIG_DNOTIFY is not set
|
|
|
|
CONFIG_INOTIFY=y
|
|
|
|
CONFIG_INOTIFY_USER=y
|
|
|
|
# CONFIG_QUOTA is not set
|
|
|
|
-# CONFIG_DNOTIFY is not set
|
|
|
|
# CONFIG_AUTOFS_FS is not set
|
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
|
|
CONFIG_FUSE_FS=m
|
|
|
|
@@ -866,7 +929,7 @@
|
|
|
|
CONFIG_TMPFS=y
|
|
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
|
|
-CONFIG_CONFIGFS_FS=m
|
|
|
|
+CONFIG_CONFIGFS_FS=y
|
|
|
|
|
|
|
|
#
|
|
|
|
# Miscellaneous filesystems
|
|
|
|
@@ -891,8 +954,10 @@
|
|
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
# CONFIG_CRAMFS is not set
|
|
|
|
# CONFIG_VXFS_FS is not set
|
|
|
|
+# CONFIG_MINIX_FS is not set
|
|
|
|
# CONFIG_HPFS_FS is not set
|
|
|
|
# CONFIG_QNX4FS_FS is not set
|
|
|
|
+# CONFIG_ROMFS_FS is not set
|
|
|
|
# CONFIG_SYSV_FS is not set
|
|
|
|
# CONFIG_UFS_FS is not set
|
|
|
|
# CONFIG_NETWORK_FILESYSTEMS is not set
|
|
|
|
@@ -943,11 +1008,6 @@
|
|
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
|
|
CONFIG_NLS_UTF8=m
|
|
|
|
# CONFIG_DLM is not set
|
|
|
|
-CONFIG_INSTRUMENTATION=y
|
|
|
|
-CONFIG_PROFILING=y
|
|
|
|
-CONFIG_OPROFILE=m
|
|
|
|
-CONFIG_KPROBES=y
|
|
|
|
-# CONFIG_MARKERS is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# Kernel hacking
|
|
|
|
@@ -965,6 +1025,7 @@
|
|
|
|
CONFIG_SCHED_DEBUG=y
|
|
|
|
# CONFIG_SCHEDSTATS is not set
|
|
|
|
# CONFIG_TIMER_STATS is not set
|
|
|
|
+# CONFIG_SLUB_STATS is not set
|
|
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
|
|
@@ -981,9 +1042,10 @@
|
|
|
|
# CONFIG_DEBUG_LIST is not set
|
|
|
|
# CONFIG_DEBUG_SG is not set
|
|
|
|
CONFIG_FRAME_POINTER=y
|
|
|
|
-CONFIG_FORCED_INLINING=y
|
|
|
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
|
|
+# CONFIG_KPROBES_SANITY_TEST is not set
|
|
|
|
+# CONFIG_BACKTRACE_SELF_TEST is not set
|
|
|
|
# CONFIG_LKDTM is not set
|
|
|
|
# CONFIG_FAULT_INJECTION is not set
|
|
|
|
# CONFIG_SAMPLES is not set
|
|
|
|
@@ -1009,6 +1071,7 @@
|
|
|
|
CONFIG_AUDIT_GENERIC=y
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
|
|
+CONFIG_GENERIC_ALLOCATOR=y
|
|
|
|
CONFIG_PLIST=y
|
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
CONFIG_HAS_IOPORT=y
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/configs/atstk1004_defconfig
|
|
|
|
+++ b/arch/avr32/configs/atstk1004_defconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,7 +1,7 @@
|
|
|
|
#
|
|
|
|
# Automatically generated make config: don't edit
|
|
|
|
-# Linux kernel version: 2.6.24-rc7
|
|
|
|
-# Wed Jan 9 23:04:20 2008
|
|
|
|
+# Linux kernel version: 2.6.25.4
|
|
|
|
+# Wed Jun 11 15:37:49 2008
|
|
|
|
#
|
|
|
|
CONFIG_AVR32=y
|
|
|
|
CONFIG_GENERIC_GPIO=y
|
|
|
|
@@ -13,10 +13,10 @@
|
|
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
CONFIG_GENERIC_TIME=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
|
|
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
|
|
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
CONFIG_GENERIC_BUG=y
|
|
|
|
@@ -34,15 +34,15 @@
|
|
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
|
|
# CONFIG_TASKSTATS is not set
|
|
|
|
-# CONFIG_USER_NS is not set
|
|
|
|
-# CONFIG_PID_NS is not set
|
|
|
|
# CONFIG_AUDIT is not set
|
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
|
|
# CONFIG_CGROUPS is not set
|
|
|
|
-# CONFIG_FAIR_GROUP_SCHED is not set
|
|
|
|
+# CONFIG_GROUP_SCHED is not set
|
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
|
|
+CONFIG_SYSFS_DEPRECATED_V2=y
|
|
|
|
# CONFIG_RELAY is not set
|
|
|
|
+# CONFIG_NAMESPACES is not set
|
|
|
|
# CONFIG_BLK_DEV_INITRD is not set
|
|
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
|
|
CONFIG_SYSCTL=y
|
|
|
|
@@ -54,24 +54,37 @@
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
CONFIG_BUG=y
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
+# CONFIG_COMPAT_BRK is not set
|
|
|
|
# CONFIG_BASE_FULL is not set
|
|
|
|
# CONFIG_FUTEX is not set
|
|
|
|
# CONFIG_EPOLL is not set
|
|
|
|
# CONFIG_SIGNALFD is not set
|
|
|
|
+# CONFIG_TIMERFD is not set
|
|
|
|
# CONFIG_EVENTFD is not set
|
|
|
|
CONFIG_SHMEM=y
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
|
|
# CONFIG_SLAB is not set
|
|
|
|
# CONFIG_SLUB is not set
|
|
|
|
CONFIG_SLOB=y
|
|
|
|
+# CONFIG_PROFILING is not set
|
|
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
+CONFIG_HAVE_OPROFILE=y
|
|
|
|
+CONFIG_HAVE_KPROBES=y
|
|
|
|
+# CONFIG_HAVE_KRETPROBES is not set
|
|
|
|
+# CONFIG_PROC_PAGE_MONITOR is not set
|
|
|
|
# CONFIG_TINY_SHMEM is not set
|
|
|
|
CONFIG_BASE_SMALL=1
|
|
|
|
# CONFIG_MODULES is not set
|
|
|
|
# CONFIG_BLOCK is not set
|
|
|
|
+CONFIG_CLASSIC_RCU=y
|
|
|
|
|
|
|
|
#
|
|
|
|
# System Type and features
|
|
|
|
#
|
|
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
|
|
+# CONFIG_NO_HZ is not set
|
|
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_SUBARCH_AVR32B=y
|
|
|
|
CONFIG_MMU=y
|
|
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
|
|
|
@@ -83,10 +96,14 @@
|
|
|
|
# CONFIG_BOARD_ATSTK1002 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1003 is not set
|
|
|
|
CONFIG_BOARD_ATSTK1004=y
|
|
|
|
+# CONFIG_BOARD_ATSTK1006 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
|
|
# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
|
|
# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
|
|
CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
2008-04-23 23:25:37 +03:00
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
|
|
|
|
#
|
|
|
|
@@ -95,6 +112,7 @@
|
|
|
|
# CONFIG_AP700X_32_BIT_SMC is not set
|
|
|
|
CONFIG_AP700X_16_BIT_SMC=y
|
|
|
|
# CONFIG_AP700X_8_BIT_SMC is not set
|
|
|
|
+# CONFIG_GPIO_DEV is not set
|
|
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
|
|
|
@@ -120,34 +138,26 @@
|
|
|
|
CONFIG_ZONE_DMA_FLAG=0
|
|
|
|
CONFIG_VIRT_TO_BUS=y
|
|
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
|
|
|
+# CONFIG_NMI_DEBUGGING is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_DW_DMAC=y
|
2008-06-13 00:13:40 +03:00
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
# CONFIG_HZ_300 is not set
|
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
CONFIG_HZ=250
|
|
|
|
+# CONFIG_SCHED_HRTICK is not set
|
|
|
|
CONFIG_CMDLINE=""
|
|
|
|
|
|
|
|
#
|
|
|
|
# Power management options
|
|
|
|
#
|
|
|
|
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
+# CONFIG_PM is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# CPU Frequency scaling
|
|
|
|
#
|
|
|
|
-CONFIG_CPU_FREQ=y
|
|
|
|
-CONFIG_CPU_FREQ_TABLE=y
|
|
|
|
-# CONFIG_CPU_FREQ_DEBUG is not set
|
|
|
|
-# CONFIG_CPU_FREQ_STAT is not set
|
|
|
|
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
|
|
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
|
|
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
|
|
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
|
|
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
|
|
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
|
|
-CONFIG_CPU_FREQ_AT32AP=y
|
|
|
|
+# CONFIG_CPU_FREQ is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# Bus options
|
|
|
|
@@ -222,6 +232,7 @@
|
|
|
|
#
|
|
|
|
# CONFIG_NET_PKTGEN is not set
|
|
|
|
# CONFIG_HAMRADIO is not set
|
|
|
|
+# CONFIG_CAN is not set
|
|
|
|
# CONFIG_IRDA is not set
|
|
|
|
# CONFIG_BT is not set
|
|
|
|
# CONFIG_AF_RXRPC is not set
|
|
|
|
@@ -321,6 +332,7 @@
|
|
|
|
# CONFIG_MTD_UBI is not set
|
|
|
|
# CONFIG_PARPORT is not set
|
|
|
|
# CONFIG_MISC_DEVICES is not set
|
|
|
|
+# CONFIG_HAVE_IDE is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# SCSI device support
|
|
|
|
@@ -358,6 +370,7 @@
|
|
|
|
#
|
|
|
|
CONFIG_SERIAL_ATMEL=y
|
|
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
|
|
+# CONFIG_SERIAL_ATMEL_PDC is not set
|
|
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
@@ -365,8 +378,6 @@
|
|
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
# CONFIG_HW_RANDOM is not set
|
|
|
|
-# CONFIG_RTC is not set
|
|
|
|
-# CONFIG_GEN_RTC is not set
|
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
# CONFIG_TCG_TPM is not set
|
|
|
|
# CONFIG_I2C is not set
|
|
|
|
@@ -389,9 +400,24 @@
|
|
|
|
# CONFIG_SPI_AT25 is not set
|
|
|
|
# CONFIG_SPI_SPIDEV is not set
|
|
|
|
# CONFIG_SPI_TLE62X0 is not set
|
|
|
|
+CONFIG_HAVE_GPIO_LIB=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# GPIO Support
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# I2C GPIO expanders:
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# SPI GPIO expanders:
|
|
|
|
+#
|
|
|
|
+# CONFIG_GPIO_MCP23S08 is not set
|
|
|
|
# CONFIG_W1 is not set
|
|
|
|
# CONFIG_POWER_SUPPLY is not set
|
|
|
|
# CONFIG_HWMON is not set
|
|
|
|
+# CONFIG_THERMAL is not set
|
|
|
|
CONFIG_WATCHDOG=y
|
|
|
|
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
|
|
|
|
|
|
@@ -471,10 +497,6 @@
|
|
|
|
#
|
|
|
|
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
|
|
#
|
|
|
|
-
|
|
|
|
-#
|
|
|
|
-# USB Gadget Support
|
|
|
|
-#
|
|
|
|
CONFIG_USB_GADGET=y
|
|
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
|
|
CONFIG_USB_GADGET_SELECTED=y
|
|
|
|
@@ -499,7 +521,9 @@
|
|
|
|
# CONFIG_USB_FILE_STORAGE is not set
|
|
|
|
# CONFIG_USB_G_SERIAL is not set
|
|
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
|
|
+# CONFIG_USB_G_PRINTER is not set
|
|
|
|
# CONFIG_MMC is not set
|
|
|
|
+# CONFIG_MEMSTICK is not set
|
|
|
|
# CONFIG_NEW_LEDS is not set
|
|
|
|
CONFIG_RTC_LIB=y
|
|
|
|
CONFIG_RTC_CLASS=y
|
|
|
|
@@ -519,15 +543,17 @@
|
|
|
|
#
|
|
|
|
# SPI RTC drivers
|
|
|
|
#
|
|
|
|
-# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
+# CONFIG_RTC_DRV_R9701 is not set
|
|
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# Platform RTC drivers
|
|
|
|
#
|
|
|
|
+# CONFIG_RTC_DRV_DS1511 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
-# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
|
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
# CONFIG_RTC_DRV_M48T59 is not set
|
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
@@ -545,9 +571,9 @@
|
|
|
|
#
|
|
|
|
# File systems
|
|
|
|
#
|
|
|
|
+# CONFIG_DNOTIFY is not set
|
|
|
|
# CONFIG_INOTIFY is not set
|
|
|
|
# CONFIG_QUOTA is not set
|
|
|
|
-# CONFIG_DNOTIFY is not set
|
|
|
|
# CONFIG_AUTOFS_FS is not set
|
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
|
|
# CONFIG_FUSE_FS is not set
|
|
|
|
@@ -580,7 +606,6 @@
|
|
|
|
# CONFIG_NETWORK_FILESYSTEMS is not set
|
|
|
|
# CONFIG_NLS is not set
|
|
|
|
# CONFIG_DLM is not set
|
|
|
|
-# CONFIG_INSTRUMENTATION is not set
|
|
|
|
|
|
|
|
#
|
|
|
|
# Kernel hacking
|
|
|
|
@@ -616,6 +641,7 @@
|
|
|
|
# CONFIG_LIBCRC32C is not set
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
|
|
+CONFIG_GENERIC_ALLOCATOR=y
|
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
CONFIG_HAS_IOPORT=y
|
|
|
|
CONFIG_HAS_DMA=y
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/configs/atstk1006_defconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,1235 @@
|
|
|
|
+#
|
|
|
|
+# Automatically generated make config: don't edit
|
|
|
|
+# Linux kernel version: 2.6.25.4
|
|
|
|
+# Wed Jun 11 15:40:45 2008
|
|
|
|
+#
|
|
|
|
+CONFIG_AVR32=y
|
|
|
|
+CONFIG_GENERIC_GPIO=y
|
|
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
+CONFIG_GENERIC_TIME=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
|
|
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
+CONFIG_GENERIC_BUG=y
|
|
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# General setup
|
|
|
|
+#
|
|
|
|
+CONFIG_EXPERIMENTAL=y
|
|
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
|
|
+CONFIG_LOCALVERSION=""
|
|
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
|
|
+CONFIG_SWAP=y
|
|
|
|
+CONFIG_SYSVIPC=y
|
|
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
|
|
+CONFIG_POSIX_MQUEUE=y
|
|
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
|
|
+# CONFIG_TASKSTATS is not set
|
|
|
|
+# CONFIG_AUDIT is not set
|
|
|
|
+# CONFIG_IKCONFIG is not set
|
|
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
|
|
+# CONFIG_CGROUPS is not set
|
|
|
|
+# CONFIG_GROUP_SCHED is not set
|
|
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
|
|
+CONFIG_SYSFS_DEPRECATED_V2=y
|
|
|
|
+CONFIG_RELAY=y
|
|
|
|
+# CONFIG_NAMESPACES is not set
|
|
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
|
|
+CONFIG_SYSCTL=y
|
|
|
|
+CONFIG_EMBEDDED=y
|
|
|
|
+# CONFIG_SYSCTL_SYSCALL is not set
|
|
|
|
+CONFIG_KALLSYMS=y
|
|
|
|
+# CONFIG_KALLSYMS_ALL is not set
|
|
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
|
|
+CONFIG_HOTPLUG=y
|
|
|
|
+CONFIG_PRINTK=y
|
|
|
|
+CONFIG_BUG=y
|
|
|
|
+CONFIG_ELF_CORE=y
|
|
|
|
+# CONFIG_COMPAT_BRK is not set
|
|
|
|
+# CONFIG_BASE_FULL is not set
|
|
|
|
+CONFIG_FUTEX=y
|
|
|
|
+CONFIG_ANON_INODES=y
|
|
|
|
+CONFIG_EPOLL=y
|
|
|
|
+CONFIG_SIGNALFD=y
|
|
|
|
+CONFIG_TIMERFD=y
|
|
|
|
+CONFIG_EVENTFD=y
|
|
|
|
+CONFIG_SHMEM=y
|
|
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
|
|
+CONFIG_SLUB_DEBUG=y
|
|
|
|
+# CONFIG_SLAB is not set
|
|
|
|
+CONFIG_SLUB=y
|
|
|
|
+# CONFIG_SLOB is not set
|
|
|
|
+CONFIG_PROFILING=y
|
|
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
+CONFIG_OPROFILE=m
|
|
|
|
+CONFIG_HAVE_OPROFILE=y
|
|
|
|
+CONFIG_KPROBES=y
|
|
|
|
+CONFIG_HAVE_KPROBES=y
|
|
|
|
+# CONFIG_HAVE_KRETPROBES is not set
|
|
|
|
+CONFIG_PROC_PAGE_MONITOR=y
|
|
|
|
+CONFIG_SLABINFO=y
|
|
|
|
+CONFIG_RT_MUTEXES=y
|
|
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
|
|
+CONFIG_BASE_SMALL=1
|
|
|
|
+CONFIG_MODULES=y
|
|
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
|
|
+# CONFIG_MODVERSIONS is not set
|
|
|
|
+# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
|
|
+# CONFIG_KMOD is not set
|
|
|
|
+CONFIG_BLOCK=y
|
|
|
|
+# CONFIG_LBD is not set
|
|
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
|
|
+# CONFIG_LSF is not set
|
|
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# IO Schedulers
|
|
|
|
+#
|
|
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
|
|
+# CONFIG_IOSCHED_AS is not set
|
|
|
|
+# CONFIG_IOSCHED_DEADLINE is not set
|
|
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
|
|
+CONFIG_CLASSIC_RCU=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# System Type and features
|
|
|
|
+#
|
|
|
|
+CONFIG_TICK_ONESHOT=y
|
|
|
|
+CONFIG_NO_HZ=y
|
|
|
|
+CONFIG_HIGH_RES_TIMERS=y
|
|
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
|
|
+CONFIG_SUBARCH_AVR32B=y
|
|
|
|
+CONFIG_MMU=y
|
|
|
|
+CONFIG_PERFORMANCE_COUNTERS=y
|
|
|
|
+CONFIG_PLATFORM_AT32AP=y
|
|
|
|
+CONFIG_CPU_AT32AP700X=y
|
|
|
|
+CONFIG_CPU_AT32AP7000=y
|
|
|
|
+CONFIG_BOARD_ATSTK1000=y
|
|
|
|
+# CONFIG_BOARD_ATNGW100 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1002 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1003 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1004 is not set
|
|
|
|
+CONFIG_BOARD_ATSTK1006=y
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
|
|
|
|
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
|
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
|
|
|
|
+CONFIG_LOADER_U_BOOT=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Atmel AVR32 AP options
|
|
|
|
+#
|
|
|
|
+# CONFIG_AP700X_32_BIT_SMC is not set
|
|
|
|
+CONFIG_AP700X_16_BIT_SMC=y
|
|
|
|
+# CONFIG_AP700X_8_BIT_SMC is not set
|
|
|
|
+CONFIG_GPIO_DEV=y
|
|
|
|
+CONFIG_LOAD_ADDRESS=0x10000000
|
|
|
|
+CONFIG_ENTRY_ADDRESS=0x90000000
|
|
|
|
+CONFIG_PHYS_OFFSET=0x10000000
|
|
|
|
+CONFIG_PREEMPT_NONE=y
|
|
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
|
|
+# CONFIG_PREEMPT is not set
|
|
|
|
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
|
|
|
|
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
|
|
|
|
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
|
|
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
|
|
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
|
|
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
|
|
+CONFIG_FLATMEM=y
|
|
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
|
|
+# CONFIG_OWNERSHIP_TRACE is not set
|
|
|
|
+CONFIG_NMI_DEBUGGING=y
|
|
|
|
+CONFIG_DW_DMAC=y
|
|
|
|
+# CONFIG_HZ_100 is not set
|
|
|
|
+CONFIG_HZ_250=y
|
|
|
|
+# CONFIG_HZ_300 is not set
|
|
|
|
+# CONFIG_HZ_1000 is not set
|
|
|
|
+CONFIG_HZ=250
|
|
|
|
+# CONFIG_SCHED_HRTICK is not set
|
|
|
|
+CONFIG_CMDLINE=""
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Power management options
|
|
|
|
+#
|
|
|
|
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
|
|
+CONFIG_PM=y
|
|
|
|
+# CONFIG_PM_LEGACY is not set
|
|
|
|
+# CONFIG_PM_DEBUG is not set
|
|
|
|
+CONFIG_PM_SLEEP=y
|
|
|
|
+CONFIG_SUSPEND=y
|
|
|
|
+CONFIG_SUSPEND_FREEZER=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# CPU Frequency scaling
|
|
|
|
+#
|
|
|
|
+CONFIG_CPU_FREQ=y
|
|
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
|
|
+# CONFIG_CPU_FREQ_STAT is not set
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
|
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
|
|
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
|
|
+CONFIG_CPU_FREQ_AT32AP=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Bus options
|
|
|
|
+#
|
|
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
|
|
+# CONFIG_PCCARD is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Executable file formats
|
|
|
|
+#
|
|
|
|
+CONFIG_BINFMT_ELF=y
|
|
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Networking
|
|
|
|
+#
|
|
|
|
+CONFIG_NET=y
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Networking options
|
|
|
|
+#
|
|
|
|
+CONFIG_PACKET=y
|
|
|
|
+CONFIG_PACKET_MMAP=y
|
|
|
|
+CONFIG_UNIX=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_XFRM=y
|
|
|
|
+CONFIG_XFRM_USER=m
|
|
|
|
+# CONFIG_XFRM_SUB_POLICY is not set
|
|
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
|
|
+# CONFIG_XFRM_STATISTICS is not set
|
|
|
|
+CONFIG_NET_KEY=m
|
|
|
|
+# CONFIG_NET_KEY_MIGRATE is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_INET=y
|
|
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
|
|
+CONFIG_IP_FIB_HASH=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_IP_PNP=y
|
|
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
|
|
+# CONFIG_IP_PNP_BOOTP is not set
|
|
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
|
|
+CONFIG_NET_IPIP=m
|
|
|
|
+CONFIG_NET_IPGRE=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_ARPD is not set
|
|
|
|
+# CONFIG_SYN_COOKIES is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_INET_AH=m
|
|
|
|
+CONFIG_INET_ESP=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_INET_TUNNEL=m
|
|
|
|
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
|
|
|
+CONFIG_INET_XFRM_MODE_TUNNEL=m
|
|
|
|
+CONFIG_INET_XFRM_MODE_BEET=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_INET_LRO is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_INET_DIAG=y
|
|
|
|
+CONFIG_INET_TCP_DIAG=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
|
|
+# CONFIG_TCP_MD5SIG is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_IPV6=m
|
|
|
|
+# CONFIG_IPV6_PRIVACY is not set
|
|
|
|
+# CONFIG_IPV6_ROUTER_PREF is not set
|
|
|
|
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
|
|
|
|
+CONFIG_INET6_AH=m
|
|
|
|
+CONFIG_INET6_ESP=m
|
|
|
|
+CONFIG_INET6_IPCOMP=m
|
|
|
|
+# CONFIG_IPV6_MIP6 is not set
|
|
|
|
+CONFIG_INET6_XFRM_TUNNEL=m
|
|
|
|
+CONFIG_INET6_TUNNEL=m
|
|
|
|
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
|
|
|
|
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
|
|
|
|
+CONFIG_INET6_XFRM_MODE_BEET=m
|
|
|
|
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
|
|
|
|
+CONFIG_IPV6_SIT=m
|
|
|
|
+CONFIG_IPV6_TUNNEL=m
|
|
|
|
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
|
|
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
|
|
+# CONFIG_NETFILTER is not set
|
|
|
|
+# CONFIG_IP_DCCP is not set
|
|
|
|
+# CONFIG_IP_SCTP is not set
|
|
|
|
+# CONFIG_TIPC is not set
|
|
|
|
+# CONFIG_ATM is not set
|
|
|
|
+CONFIG_BRIDGE=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
|
|
+# CONFIG_DECNET is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_LLC=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_LLC2 is not set
|
|
|
|
+# CONFIG_IPX is not set
|
|
|
|
+# CONFIG_ATALK is not set
|
|
|
|
+# CONFIG_X25 is not set
|
|
|
|
+# CONFIG_LAPB is not set
|
|
|
|
+# CONFIG_ECONET is not set
|
|
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
|
|
+# CONFIG_NET_SCHED is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Network testing
|
|
|
|
+#
|
|
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
|
|
+# CONFIG_NET_TCPPROBE is not set
|
|
|
|
+# CONFIG_HAMRADIO is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_CAN is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_IRDA is not set
|
|
|
|
+# CONFIG_BT is not set
|
|
|
|
+# CONFIG_AF_RXRPC is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Wireless
|
|
|
|
+#
|
|
|
|
+# CONFIG_CFG80211 is not set
|
|
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
|
|
+# CONFIG_MAC80211 is not set
|
|
|
|
+# CONFIG_IEEE80211 is not set
|
|
|
|
+# CONFIG_RFKILL is not set
|
|
|
|
+# CONFIG_NET_9P is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Device Drivers
|
|
|
|
+#
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Generic Driver Options
|
|
|
|
+#
|
|
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
|
|
+CONFIG_STANDALONE=y
|
|
|
|
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
|
|
+# CONFIG_FW_LOADER is not set
|
|
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
|
|
+# CONFIG_CONNECTOR is not set
|
|
|
|
+CONFIG_MTD=y
|
|
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# User Modules And Translation Layers
|
|
|
|
+#
|
|
|
|
+CONFIG_MTD_CHAR=y
|
|
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
|
|
+CONFIG_MTD_BLOCK=y
|
|
|
|
+# CONFIG_FTL is not set
|
|
|
|
+# CONFIG_NFTL is not set
|
|
|
|
+# CONFIG_INFTL is not set
|
|
|
|
+# CONFIG_RFD_FTL is not set
|
|
|
|
+# CONFIG_SSFDC is not set
|
|
|
|
+# CONFIG_MTD_OOPS is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# RAM/ROM/Flash chip drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_MTD_CFI=y
|
|
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
|
|
+CONFIG_MTD_GEN_PROBE=y
|
|
|
|
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
|
|
+CONFIG_MTD_CFI_I1=y
|
|
|
|
+CONFIG_MTD_CFI_I2=y
|
|
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
|
|
+# CONFIG_MTD_CFI_INTELEXT is not set
|
|
|
|
+CONFIG_MTD_CFI_AMDSTD=y
|
|
|
|
+# CONFIG_MTD_CFI_STAA is not set
|
|
|
|
+CONFIG_MTD_CFI_UTIL=y
|
|
|
|
+# CONFIG_MTD_RAM is not set
|
|
|
|
+# CONFIG_MTD_ROM is not set
|
|
|
|
+# CONFIG_MTD_ABSENT is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Mapping drivers for chip access
|
|
|
|
+#
|
|
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
|
|
+CONFIG_MTD_PHYSMAP=y
|
|
|
|
+CONFIG_MTD_PHYSMAP_START=0x8000000
|
|
|
|
+CONFIG_MTD_PHYSMAP_LEN=0x0
|
|
|
|
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
|
|
+# CONFIG_MTD_PLATRAM is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Self-contained MTD device drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_MTD_DATAFLASH=m
|
|
|
|
+CONFIG_MTD_M25P80=m
|
|
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Disk-On-Chip Device Drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_MTD_NAND=y
|
|
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
|
|
+CONFIG_MTD_NAND_ATMEL=y
|
|
|
|
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
|
|
|
|
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
|
|
|
|
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
|
|
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_MTD_ONENAND is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# UBI - Unsorted block images
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_MTD_UBI=m
|
|
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
|
|
+CONFIG_MTD_UBI_GLUEBI=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# UBI debugging options
|
|
|
|
+#
|
|
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_PARPORT is not set
|
|
|
|
+CONFIG_BLK_DEV=y
|
|
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
|
|
+CONFIG_BLK_DEV_LOOP=m
|
|
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
|
|
+CONFIG_BLK_DEV_NBD=m
|
|
|
|
+CONFIG_BLK_DEV_RAM=m
|
|
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_BLK_DEV_XIP is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
|
|
+CONFIG_MISC_DEVICES=y
|
|
|
|
+CONFIG_ATMEL_PWM=m
|
2008-04-23 23:25:37 +03:00
|
|
|
+CONFIG_ATMEL_TCLIB=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC=y
|
|
|
|
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
|
|
+CONFIG_ATMEL_SSC=m
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ENCLOSURE_SERVICES is not set
|
|
|
|
+# CONFIG_HAVE_IDE is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SCSI device support
|
|
|
|
+#
|
|
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
|
|
+CONFIG_SCSI=m
|
|
|
|
+CONFIG_SCSI_DMA=y
|
|
|
|
+# CONFIG_SCSI_TGT is not set
|
|
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
|
|
+# CONFIG_SCSI_PROC_FS is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
|
|
+#
|
|
|
|
+CONFIG_BLK_DEV_SD=m
|
|
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
|
|
+CONFIG_BLK_DEV_SR=m
|
|
|
|
+# CONFIG_BLK_DEV_SR_VENDOR is not set
|
|
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
|
|
+#
|
|
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SCSI Transports
|
|
|
|
+#
|
|
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_SCSI_LOWLEVEL is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_ATA=m
|
|
|
|
+# CONFIG_ATA_NONSTANDARD is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_SATA_MV is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_PATA_AT32=m
|
|
|
|
+# CONFIG_PATA_PLATFORM is not set
|
|
|
|
+# CONFIG_MD is not set
|
|
|
|
+CONFIG_NETDEVICES=y
|
|
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
|
|
+# CONFIG_DUMMY is not set
|
|
|
|
+# CONFIG_BONDING is not set
|
|
|
|
+# CONFIG_MACVLAN is not set
|
|
|
|
+# CONFIG_EQUALIZER is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_TUN=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_VETH is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_PHYLIB=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# MII PHY device drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
|
|
+# CONFIG_LXT_PHY is not set
|
|
|
|
+# CONFIG_CICADA_PHY is not set
|
|
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
|
|
+# CONFIG_SMSC_PHY is not set
|
|
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
|
|
+# CONFIG_REALTEK_PHY is not set
|
|
|
|
+# CONFIG_FIXED_PHY is not set
|
|
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
|
|
+CONFIG_NET_ETHERNET=y
|
|
|
|
+# CONFIG_MII is not set
|
|
|
|
+CONFIG_MACB=y
|
|
|
|
+# CONFIG_ENC28J60 is not set
|
|
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
|
|
+# CONFIG_B44 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
|
|
+# CONFIG_NETDEV_10000 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Wireless LAN
|
|
|
|
+#
|
|
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
|
|
+# CONFIG_WLAN_80211 is not set
|
|
|
|
+# CONFIG_WAN is not set
|
|
|
|
+CONFIG_PPP=m
|
|
|
|
+# CONFIG_PPP_MULTILINK is not set
|
|
|
|
+# CONFIG_PPP_FILTER is not set
|
|
|
|
+CONFIG_PPP_ASYNC=m
|
|
|
|
+# CONFIG_PPP_SYNC_TTY is not set
|
|
|
|
+CONFIG_PPP_DEFLATE=m
|
|
|
|
+CONFIG_PPP_BSDCOMP=m
|
|
|
|
+# CONFIG_PPP_MPPE is not set
|
|
|
|
+# CONFIG_PPPOE is not set
|
|
|
|
+# CONFIG_PPPOL2TP is not set
|
|
|
|
+# CONFIG_SLIP is not set
|
|
|
|
+CONFIG_SLHC=m
|
|
|
|
+# CONFIG_NETCONSOLE is not set
|
|
|
|
+# CONFIG_NETPOLL is not set
|
|
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
+# CONFIG_ISDN is not set
|
|
|
|
+# CONFIG_PHONE is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Input device support
|
|
|
|
+#
|
|
|
|
+CONFIG_INPUT=m
|
|
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
|
|
+CONFIG_INPUT_POLLDEV=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Userland interfaces
|
|
|
|
+#
|
|
|
|
+CONFIG_INPUT_MOUSEDEV=m
|
|
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_INPUT_EVDEV=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_INPUT_EVBUG is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Input Device Drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
|
|
+# CONFIG_KEYBOARD_ATKBD is not set
|
|
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
|
|
+CONFIG_KEYBOARD_GPIO=m
|
|
|
|
+CONFIG_INPUT_MOUSE=y
|
|
|
|
+# CONFIG_MOUSE_PS2 is not set
|
|
|
|
+# CONFIG_MOUSE_SERIAL is not set
|
|
|
|
+# CONFIG_MOUSE_VSXXXAA is not set
|
|
|
|
+CONFIG_MOUSE_GPIO=m
|
|
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
|
|
+# CONFIG_INPUT_MISC is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Hardware I/O ports
|
|
|
|
+#
|
|
|
|
+# CONFIG_SERIO is not set
|
|
|
|
+# CONFIG_GAMEPORT is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Character devices
|
|
|
|
+#
|
|
|
|
+# CONFIG_VT is not set
|
|
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Serial drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_SERIAL_8250 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Non-8250 serial port support
|
|
|
|
+#
|
|
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
|
|
+CONFIG_SERIAL_CORE=y
|
|
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
+CONFIG_UNIX98_PTYS=y
|
|
|
|
+# CONFIG_LEGACY_PTYS is not set
|
|
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
|
|
+# CONFIG_HW_RANDOM is not set
|
|
|
|
+# CONFIG_R3964 is not set
|
|
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
|
|
+# CONFIG_TCG_TPM is not set
|
|
|
|
+CONFIG_I2C=m
|
|
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
|
|
+CONFIG_I2C_CHARDEV=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# I2C Algorithms
|
|
|
|
+#
|
|
|
|
+CONFIG_I2C_ALGOBIT=m
|
|
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# I2C Hardware Bus support
|
|
|
|
+#
|
|
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
|
|
+CONFIG_I2C_GPIO=m
|
|
|
|
+# CONFIG_I2C_OCORES is not set
|
|
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
|
|
+# CONFIG_I2C_STUB is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Miscellaneous I2C Chip support
|
|
|
|
+#
|
|
|
|
+# CONFIG_DS1682 is not set
|
|
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_PCF8575 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_TPS65010 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SPI support
|
|
|
|
+#
|
|
|
|
+CONFIG_SPI=y
|
|
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
|
|
+CONFIG_SPI_MASTER=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SPI Master Controller Drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_SPI_ATMEL=y
|
|
|
|
+# CONFIG_SPI_BITBANG is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SPI Protocol Masters
|
|
|
|
+#
|
|
|
|
+# CONFIG_SPI_AT25 is not set
|
|
|
|
+CONFIG_SPI_SPIDEV=m
|
|
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_HAVE_GPIO_LIB=y
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# GPIO Support
|
|
|
|
+#
|
|
|
|
+# CONFIG_DEBUG_GPIO is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# I2C GPIO expanders:
|
|
|
|
+#
|
|
|
|
+# CONFIG_GPIO_PCA953X is not set
|
|
|
|
+# CONFIG_GPIO_PCF857X is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# SPI GPIO expanders:
|
|
|
|
+#
|
|
|
|
+# CONFIG_GPIO_MCP23S08 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_W1 is not set
|
|
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
|
|
+# CONFIG_HWMON is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_THERMAL is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_WATCHDOG=y
|
|
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Watchdog Device Drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
|
|
+CONFIG_AT32AP700X_WDT=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Sonics Silicon Backplane
|
|
|
|
+#
|
|
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
|
|
+# CONFIG_SSB is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Multifunction device drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_MFD_SM501 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Multimedia devices
|
|
|
|
+#
|
|
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
|
|
+# CONFIG_DVB_CORE is not set
|
|
|
|
+# CONFIG_DAB is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Graphics support
|
|
|
|
+#
|
|
|
|
+# CONFIG_VGASTATE is not set
|
|
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_FB=y
|
|
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
|
|
+# CONFIG_FB_DDC is not set
|
|
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
|
|
+# CONFIG_FB_MACMODES is not set
|
|
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
|
|
+
|
|
|
|
+#
|
|
|
|
+# Frame buffer hardware drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
|
|
+CONFIG_FB_ATMEL=y
|
|
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
|
|
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
|
|
+CONFIG_LCD_CLASS_DEVICE=y
|
|
|
|
+CONFIG_LCD_LTV350QV=y
|
|
|
|
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Display device support
|
|
|
|
+#
|
|
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_LOGO is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Sound
|
|
|
|
+#
|
|
|
|
+CONFIG_SOUND=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Advanced Linux Sound Architecture
|
|
|
|
+#
|
|
|
|
+CONFIG_SND=m
|
|
|
|
+CONFIG_SND_TIMER=m
|
|
|
|
+CONFIG_SND_PCM=m
|
|
|
|
+# CONFIG_SND_SEQUENCER is not set
|
|
|
|
+CONFIG_SND_OSSEMUL=y
|
|
|
|
+CONFIG_SND_MIXER_OSS=m
|
|
|
|
+CONFIG_SND_PCM_OSS=m
|
|
|
|
+CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
|
|
+# CONFIG_SND_DYNAMIC_MINORS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_SND_SUPPORT_OLD_API is not set
|
|
|
|
+# CONFIG_SND_VERBOSE_PROCFS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_SND_VERBOSE_PRINTK is not set
|
|
|
|
+# CONFIG_SND_DEBUG is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Generic devices
|
|
|
|
+#
|
|
|
|
+CONFIG_SND_AC97_CODEC=m
|
|
|
|
+# CONFIG_SND_DUMMY is not set
|
|
|
|
+# CONFIG_SND_MTPAV is not set
|
|
|
|
+# CONFIG_SND_SERIAL_U16550 is not set
|
|
|
|
+# CONFIG_SND_MPU401 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# AVR32 devices
|
|
|
|
+#
|
|
|
|
+CONFIG_SND_ATMEL_AC97=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SPI devices
|
|
|
|
+#
|
|
|
|
+CONFIG_SND_AT73C213=m
|
|
|
|
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# System on Chip audio support
|
|
|
|
+#
|
|
|
|
+# CONFIG_SND_SOC is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SoC Audio support for SuperH
|
|
|
|
+#
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# ALSA SoC audio for Freescale SOCs
|
|
|
|
+#
|
|
|
|
+
|
|
|
|
+#
|
2008-02-07 22:08:19 +02:00
|
|
|
+# Open Sound System
|
|
|
|
+#
|
|
|
|
+# CONFIG_SOUND_PRIME is not set
|
|
|
|
+CONFIG_AC97_BUS=m
|
|
|
|
+# CONFIG_HID_SUPPORT is not set
|
|
|
|
+CONFIG_USB_SUPPORT=y
|
|
|
|
+# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
|
|
+# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
|
|
+#
|
|
|
|
+CONFIG_USB_GADGET=y
|
|
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
|
|
+CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
|
|
+CONFIG_USB_ATMEL_USBA=y
|
|
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
|
|
+CONFIG_USB_ZERO=m
|
|
|
|
+CONFIG_USB_ETH=m
|
|
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
|
|
+CONFIG_USB_GADGETFS=m
|
|
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
|
|
+CONFIG_USB_G_SERIAL=m
|
|
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_USB_G_PRINTER is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_MMC=y
|
|
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# MMC/SD Card Drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_MMC_BLOCK=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_SDIO_UART is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# MMC/SD Host Controller Drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
|
|
+CONFIG_MMC_SPI=m
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_MEMSTICK is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_NEW_LEDS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_LEDS_CLASS=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# LED drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_LEDS_ATMEL_PWM=m
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_LEDS_GPIO=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# LED Triggers
|
|
|
|
+#
|
|
|
|
+CONFIG_LEDS_TRIGGERS=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_LEDS_TRIGGER_TIMER=m
|
|
|
|
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_RTC_LIB=y
|
|
|
|
+CONFIG_RTC_CLASS=y
|
|
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
|
|
+# CONFIG_RTC_DEBUG is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# RTC interfaces
|
|
|
|
+#
|
|
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# I2C RTC drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_S35390A is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# SPI RTC drivers
|
|
|
|
+#
|
|
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_R9701 is not set
|
|
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Platform RTC drivers
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_DS1511 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# on-CPU RTC drivers
|
|
|
|
+#
|
|
|
|
+CONFIG_RTC_DRV_AT32AP700X=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Userspace I/O
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_UIO is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# File systems
|
|
|
|
+#
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_EXT2_FS=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_EXT2_FS_XATTR is not set
|
|
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_EXT3_FS=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_EXT3_FS_XATTR is not set
|
|
|
|
+# CONFIG_EXT4DEV_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_JBD=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
|
|
+# CONFIG_REISERFS_FS is not set
|
|
|
|
+# CONFIG_JFS_FS is not set
|
|
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
|
|
+# CONFIG_XFS_FS is not set
|
|
|
|
+# CONFIG_GFS2_FS is not set
|
|
|
|
+# CONFIG_OCFS2_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_DNOTIFY is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_INOTIFY=y
|
|
|
|
+CONFIG_INOTIFY_USER=y
|
|
|
|
+# CONFIG_QUOTA is not set
|
|
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
|
|
+CONFIG_FUSE_FS=m
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# CD-ROM/DVD Filesystems
|
|
|
|
+#
|
|
|
|
+# CONFIG_ISO9660_FS is not set
|
|
|
|
+# CONFIG_UDF_FS is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# DOS/FAT/NT Filesystems
|
|
|
|
+#
|
|
|
|
+CONFIG_FAT_FS=m
|
|
|
|
+CONFIG_MSDOS_FS=m
|
|
|
|
+CONFIG_VFAT_FS=m
|
|
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
|
|
+# CONFIG_NTFS_FS is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Pseudo filesystems
|
|
|
|
+#
|
|
|
|
+CONFIG_PROC_FS=y
|
|
|
|
+CONFIG_PROC_KCORE=y
|
|
|
|
+CONFIG_PROC_SYSCTL=y
|
|
|
|
+CONFIG_SYSFS=y
|
|
|
|
+CONFIG_TMPFS=y
|
|
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
|
|
+CONFIG_CONFIGFS_FS=y
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Miscellaneous filesystems
|
|
|
|
+#
|
|
|
|
+# CONFIG_ADFS_FS is not set
|
|
|
|
+# CONFIG_AFFS_FS is not set
|
|
|
|
+# CONFIG_HFS_FS is not set
|
|
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
|
|
+# CONFIG_BEFS_FS is not set
|
|
|
|
+# CONFIG_BFS_FS is not set
|
|
|
|
+# CONFIG_EFS_FS is not set
|
|
|
|
+CONFIG_JFFS2_FS=y
|
|
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
|
|
+CONFIG_JFFS2_RTIME=y
|
|
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
+# CONFIG_CRAMFS is not set
|
|
|
|
+# CONFIG_VXFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_MINIX_FS=m
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_HPFS_FS is not set
|
|
|
|
+# CONFIG_QNX4FS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_ROMFS_FS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_SYSV_FS is not set
|
|
|
|
+# CONFIG_UFS_FS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
|
|
+CONFIG_NFS_FS=y
|
|
|
|
+CONFIG_NFS_V3=y
|
|
|
|
+# CONFIG_NFS_V3_ACL is not set
|
|
|
|
+# CONFIG_NFS_V4 is not set
|
|
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
|
|
+# CONFIG_NFSD is not set
|
|
|
|
+CONFIG_ROOT_NFS=y
|
|
|
|
+CONFIG_LOCKD=y
|
|
|
|
+CONFIG_LOCKD_V4=y
|
|
|
|
+CONFIG_NFS_COMMON=y
|
|
|
|
+CONFIG_SUNRPC=y
|
|
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
|
|
+# CONFIG_SMB_FS is not set
|
|
|
|
+# CONFIG_CIFS is not set
|
|
|
|
+# CONFIG_NCP_FS is not set
|
|
|
|
+# CONFIG_CODA_FS is not set
|
|
|
|
+# CONFIG_AFS_FS is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Partition Types
|
|
|
|
+#
|
|
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
|
|
+CONFIG_NLS=m
|
|
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
|
|
+CONFIG_NLS_CODEPAGE_437=m
|
|
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
|
|
+# CONFIG_NLS_ASCII is not set
|
|
|
|
+CONFIG_NLS_ISO8859_1=m
|
|
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
|
|
+CONFIG_NLS_UTF8=m
|
|
|
|
+# CONFIG_DLM is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Kernel hacking
|
|
|
|
+#
|
|
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
|
|
+CONFIG_DEBUG_FS=y
|
|
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
|
|
+CONFIG_SCHED_DEBUG=y
|
|
|
|
+# CONFIG_SCHEDSTATS is not set
|
|
|
|
+# CONFIG_TIMER_STATS is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_SLUB_DEBUG_ON is not set
|
|
|
|
+# CONFIG_SLUB_STATS is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
|
|
+# CONFIG_DEBUG_SPINLOCK is not set
|
|
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
|
|
+# CONFIG_LOCK_STAT is not set
|
|
|
|
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
|
|
+# CONFIG_DEBUG_KOBJECT is not set
|
|
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
|
|
+# CONFIG_DEBUG_INFO is not set
|
|
|
|
+# CONFIG_DEBUG_VM is not set
|
|
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
|
|
+# CONFIG_DEBUG_SG is not set
|
|
|
|
+CONFIG_FRAME_POINTER=y
|
|
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
|
|
+# CONFIG_RCU_TORTURE_TEST is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+# CONFIG_KPROBES_SANITY_TEST is not set
|
|
|
|
+# CONFIG_BACKTRACE_SELF_TEST is not set
|
2008-02-07 22:08:19 +02:00
|
|
|
+# CONFIG_LKDTM is not set
|
|
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
|
|
+# CONFIG_SAMPLES is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Security options
|
|
|
|
+#
|
|
|
|
+# CONFIG_KEYS is not set
|
|
|
|
+# CONFIG_SECURITY is not set
|
|
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_CRYPTO=y
|
|
|
|
+CONFIG_CRYPTO_ALGAPI=m
|
|
|
|
+CONFIG_CRYPTO_AEAD=m
|
|
|
|
+CONFIG_CRYPTO_BLKCIPHER=m
|
|
|
|
+# CONFIG_CRYPTO_SEQIV is not set
|
|
|
|
+CONFIG_CRYPTO_HASH=m
|
|
|
|
+CONFIG_CRYPTO_MANAGER=m
|
|
|
|
+CONFIG_CRYPTO_HMAC=m
|
|
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
|
|
+CONFIG_CRYPTO_MD5=m
|
|
|
|
+CONFIG_CRYPTO_SHA1=m
|
|
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
|
|
+CONFIG_CRYPTO_CBC=m
|
|
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
|
|
+# CONFIG_CRYPTO_CTR is not set
|
|
|
|
+# CONFIG_CRYPTO_GCM is not set
|
|
|
|
+# CONFIG_CRYPTO_CCM is not set
|
|
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
|
|
+CONFIG_CRYPTO_DES=m
|
|
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
|
|
+# CONFIG_CRYPTO_SALSA20 is not set
|
|
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
|
|
+CONFIG_CRYPTO_AUTHENC=m
|
|
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
|
|
+# CONFIG_CRYPTO_HW is not set
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#
|
|
|
|
+# Library routines
|
|
|
|
+#
|
|
|
|
+CONFIG_BITREVERSE=y
|
|
|
|
+CONFIG_CRC_CCITT=m
|
|
|
|
+# CONFIG_CRC16 is not set
|
|
|
|
+CONFIG_CRC_ITU_T=m
|
|
|
|
+CONFIG_CRC32=y
|
|
|
|
+CONFIG_CRC7=m
|
|
|
|
+# CONFIG_LIBCRC32C is not set
|
|
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
|
|
+CONFIG_ZLIB_DEFLATE=y
|
2008-06-13 00:13:40 +03:00
|
|
|
+CONFIG_GENERIC_ALLOCATOR=y
|
2008-02-07 22:08:19 +02:00
|
|
|
+CONFIG_PLIST=y
|
|
|
|
+CONFIG_HAS_IOMEM=y
|
|
|
|
+CONFIG_HAS_IOPORT=y
|
|
|
|
+CONFIG_HAS_DMA=y
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
2008-07-05 17:49:07 +03:00
|
|
|
+++ b/arch/avr32/drivers/Makefile
|
|
|
|
@@ -0,0 +1 @@
|
|
|
|
+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
|
|
|
|
--- /dev/null
|
2008-06-13 01:24:27 +03:00
|
|
|
+++ b/arch/avr32/drivers/dw-dmac.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,761 @@
|
|
|
|
+/*
|
|
|
|
+ * Driver for the Synopsys DesignWare DMA Controller
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/device.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
|
|
+#include <linux/dmapool.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/platform_device.h>
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm/dma-controller.h>
|
|
|
|
+#include <asm/io.h>
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include "dw-dmac.h"
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#define DMAC_NR_CHANNELS 3
|
|
|
|
+#define DMAC_MAX_BLOCKSIZE 4095
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+enum {
|
|
|
|
+ CH_STATE_FREE = 0,
|
|
|
|
+ CH_STATE_ALLOCATED,
|
|
|
|
+ CH_STATE_BUSY,
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct dw_dma_lli {
|
|
|
|
+ dma_addr_t sar;
|
|
|
|
+ dma_addr_t dar;
|
|
|
|
+ dma_addr_t llp;
|
|
|
|
+ u32 ctllo;
|
|
|
|
+ u32 ctlhi;
|
|
|
|
+ u32 sstat;
|
|
|
|
+ u32 dstat;
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct dw_dma_block {
|
|
|
|
+ struct dw_dma_lli *lli_vaddr;
|
|
|
|
+ dma_addr_t lli_dma_addr;
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct dw_dma_channel {
|
|
|
|
+ unsigned int state;
|
|
|
|
+ int is_cyclic;
|
|
|
|
+ struct dma_request_sg *req_sg;
|
|
|
|
+ struct dma_request_cyclic *req_cyclic;
|
|
|
|
+ unsigned int nr_blocks;
|
|
|
|
+ int direction;
|
|
|
|
+ struct dw_dma_block *block;
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct dw_dma_controller {
|
|
|
|
+ spinlock_t lock;
|
|
|
|
+ void * __iomem regs;
|
|
|
|
+ struct dma_pool *lli_pool;
|
|
|
|
+ struct clk *hclk;
|
|
|
|
+ struct dma_controller dma;
|
|
|
|
+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
|
|
|
|
+};
|
|
|
|
+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#define dmac_writel_hi(dmac, reg, value) \
|
|
|
|
+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
|
|
|
|
+#define dmac_readl_hi(dmac, reg) \
|
|
|
|
+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
|
|
|
|
+#define dmac_writel_lo(dmac, reg, value) \
|
|
|
|
+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
|
|
|
|
+#define dmac_readl_lo(dmac, reg) \
|
|
|
|
+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
|
|
|
|
+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
|
|
|
|
+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
|
|
|
|
+ + DW_DMAC_CHAN_##reg + 4))
|
|
|
|
+#define dmac_chan_readl_hi(dmac, chan, reg) \
|
|
|
|
+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
|
|
|
|
+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
|
|
|
|
+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
|
|
|
|
+#define dmac_chan_readl_lo(dmac, chan, reg) \
|
|
|
|
+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
|
|
|
|
+#define set_channel_bit(dmac, reg, chan) \
|
|
|
|
+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
|
|
|
|
+#define clear_channel_bit(dmac, reg, chan) \
|
|
|
|
+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int dmac_alloc_channel(struct dma_controller *_dmac)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ unsigned long flags;
|
|
|
|
+ int i;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
|
|
|
+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
|
|
|
|
+ if (dmac->channel[i].state == CH_STATE_FREE)
|
|
|
|
+ break;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (i < DMAC_NR_CHANNELS) {
|
|
|
|
+ chan = &dmac->channel[i];
|
|
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
|
|
+ } else {
|
|
|
|
+ i = -EBUSY;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return i;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS
|
|
|
|
+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dmac->channel[channel].state = CH_STATE_FREE;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
|
|
|
|
+ unsigned int nr_blocks)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_block *block;
|
|
|
|
+ void *p;
|
|
|
|
+ unsigned int i;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ block = kmalloc(nr_blocks * sizeof(*block),
|
|
|
|
+ GFP_KERNEL);
|
|
|
|
+ if (unlikely(!block))
|
|
|
|
+ return NULL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
|
|
+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
|
|
|
|
+ &block[i].lli_dma_addr);
|
|
|
|
+ block[i].lli_vaddr = p;
|
|
|
|
+ if (unlikely(!p))
|
|
|
|
+ goto fail;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return block;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+fail:
|
|
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
|
|
+ if (!block[i].lli_vaddr)
|
|
|
|
+ break;
|
|
|
|
+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
|
|
|
|
+ block[i].lli_dma_addr);
|
|
|
|
+ }
|
|
|
|
+ kfree(block);
|
|
|
|
+ return NULL;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void cleanup_channel(struct dw_dma_controller *dmac,
|
|
|
|
+ struct dw_dma_channel *chan)
|
|
|
|
+{
|
|
|
|
+ unsigned int i;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (chan->nr_blocks > 1) {
|
|
|
|
+ for (i = 0; i < chan->nr_blocks; i++)
|
|
|
|
+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
|
|
|
|
+ chan->block[i].lli_dma_addr);
|
|
|
|
+ kfree(chan->block);
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
|
|
|
|
+ struct dma_request_sg *req)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ unsigned long ctlhi, ctllo, cfghi, cfglo;
|
|
|
|
+ unsigned long block_size;
|
|
|
|
+ unsigned int nr_blocks;
|
|
|
|
+ int ret, i, direction;
|
|
|
|
+ unsigned long flags;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ret = -EINVAL;
|
|
|
|
+ if (req->req.channel >= DMAC_NR_CHANNELS
|
|
|
|
+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
|
|
|
|
+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
|
|
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan = &dmac->channel[req->req.channel];
|
|
|
|
+ chan->state = CH_STATE_BUSY;
|
|
|
|
+ chan->req_sg = req;
|
|
|
|
+ chan->is_cyclic = 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * We have marked the channel as busy, so no need to keep the
|
|
|
|
+ * lock as long as we only touch the channel-specific
|
|
|
|
+ * registers
|
|
|
|
+ */
|
|
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * There may be limitations in the driver and/or the DMA
|
|
|
|
+ * controller that prevents us from sending a whole
|
|
|
|
+ * scatterlist item in one go. Taking this into account,
|
|
|
|
+ * calculate the number of block transfers we need to set up.
|
|
|
|
+ *
|
|
|
|
+ * FIXME: Let the peripheral driver know about the maximum
|
|
|
|
+ * block size we support. We really don't want to use a
|
|
|
|
+ * different block size than what was suggested by the
|
|
|
|
+ * peripheral.
|
|
|
|
+ *
|
|
|
|
+ * Each block will get its own Linked List Item (LLI) below.
|
|
|
|
+ */
|
|
|
|
+ block_size = req->block_size;
|
|
|
|
+ nr_blocks = req->nr_blocks;
|
|
|
|
+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
|
|
|
|
+ block_size, nr_blocks, req->nr_sg);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ BUG_ON(nr_blocks == 0);
|
|
|
|
+ chan->nr_blocks = nr_blocks;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ret = -EINVAL;
|
|
|
|
+ cfglo = cfghi = 0;
|
|
|
|
+ switch (req->direction) {
|
|
|
|
+ case DMA_DIR_MEM_TO_PERIPH:
|
|
|
|
+ direction = DMA_TO_DEVICE;
|
|
|
|
+ cfghi = req->periph_id << (43 - 32);
|
|
|
|
+ break;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ case DMA_DIR_PERIPH_TO_MEM:
|
|
|
|
+ direction = DMA_FROM_DEVICE;
|
|
|
|
+ cfghi = req->periph_id << (39 - 32);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ goto out_unclaim_channel;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan->direction = direction;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ctlhi = block_size >> req->width;
|
|
|
|
+ ctllo = ((req->direction << 20)
|
|
|
|
+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
|
|
|
|
+ | (req->width << 4) | (req->width << 1)
|
|
|
|
+ | (1 << 0)); // interrupt enable
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (nr_blocks == 1) {
|
|
|
|
+ /* Only one block: No need to use block chaining */
|
|
|
|
+ if (direction == DMA_TO_DEVICE) {
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
|
|
|
|
+ req->sg->dma_address);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
|
|
|
|
+ req->data_reg);
|
|
|
|
+ ctllo |= 2 << 7; // no dst increment
|
|
|
|
+ } else {
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
|
|
|
|
+ req->data_reg);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
|
|
|
|
+ req->sg->dma_address);
|
|
|
|
+ ctllo |= 2 << 9; // no src increment
|
|
|
|
+ }
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
|
|
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
|
|
|
|
+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
|
|
|
|
+ } else {
|
|
|
|
+ struct dw_dma_lli *lli, *lli_prev = NULL;
|
|
|
|
+ int j = 0, offset = 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ chan->block = allocate_blocks(dmac, nr_blocks);
|
|
|
|
+ if (!chan->block)
|
|
|
|
+ goto out_unclaim_channel;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (direction == DMA_TO_DEVICE)
|
|
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
|
|
|
|
+ else
|
|
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * Map scatterlist items to blocks. One scatterlist
|
|
|
|
+ * item may need more than one block for the reasons
|
|
|
|
+ * mentioned above.
|
|
|
|
+ */
|
|
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
|
|
+ lli = chan->block[i].lli_vaddr;
|
|
|
|
+ if (lli_prev) {
|
|
|
|
+ lli_prev->llp = chan->block[i].lli_dma_addr;
|
|
|
|
+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
|
|
+ chan->block[i - 1].lli_dma_addr,
|
|
|
|
+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
|
|
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);
|
|
|
|
+ }
|
|
|
|
+ lli->llp = 0;
|
|
|
|
+ lli->ctllo = ctllo;
|
|
|
|
+ lli->ctlhi = ctlhi;
|
|
|
|
+ if (direction == DMA_TO_DEVICE) {
|
|
|
|
+ lli->sar = req->sg[j].dma_address + offset;
|
|
|
|
+ lli->dar = req->data_reg;
|
|
|
|
+ } else {
|
|
|
|
+ lli->sar = req->data_reg;
|
|
|
|
+ lli->dar = req->sg[j].dma_address + offset;
|
|
|
|
+ }
|
|
|
|
+ lli_prev = lli;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ offset += block_size;
|
|
|
|
+ if (offset > req->sg[j].length) {
|
|
|
|
+ j++;
|
|
|
|
+ offset = 0;
|
|
|
|
+ }
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
|
|
+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
|
|
|
|
+ lli_prev->dar, lli_prev->llp,
|
|
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * SAR, DAR and CTL are initialized from the LLI. We
|
|
|
|
+ * only have to enable the LLI bits in CTL.
|
|
|
|
+ */
|
|
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
|
|
|
|
+ chan->block[0].lli_dma_addr);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
|
|
|
|
+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
|
|
|
|
+ if (req->req.block_complete)
|
|
|
|
+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
|
|
+ else
|
|
|
|
+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+out_unclaim_channel:
|
|
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
|
|
+ return ret;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
|
|
|
|
+ struct dma_request_cyclic *req)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ unsigned long ctlhi, ctllo, cfghi, cfglo;
|
|
|
|
+ unsigned long block_size;
|
|
|
|
+ int ret, i, direction;
|
|
|
|
+ unsigned long flags;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ block_size = (req->buffer_size/req->periods) >> req->width;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ret = -EINVAL;
|
|
|
|
+ if (req->req.channel >= DMAC_NR_CHANNELS
|
|
|
|
+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
|
|
|
|
+ || (req->periods == 0)
|
|
|
|
+ || block_size > DMAC_MAX_BLOCKSIZE) {
|
|
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chan = &dmac->channel[req->req.channel];
|
|
|
|
+ chan->state = CH_STATE_BUSY;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan->is_cyclic = 1;
|
|
|
|
+ chan->req_cyclic = req;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*
|
|
|
|
+ * We have marked the channel as busy, so no need to keep the
|
|
|
|
+ * lock as long as we only touch the channel-specific
|
|
|
|
+ * registers
|
|
|
|
+ */
|
|
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ Setup
|
2008-02-07 22:08:19 +02:00
|
|
|
+ */
|
2008-06-13 00:13:40 +03:00
|
|
|
+ BUG_ON(req->buffer_size % req->periods);
|
|
|
|
+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan->nr_blocks = req->periods;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = -EINVAL;
|
|
|
|
+ cfglo = cfghi = 0;
|
|
|
|
+ switch (req->direction) {
|
|
|
|
+ case DMA_DIR_MEM_TO_PERIPH:
|
|
|
|
+ direction = DMA_TO_DEVICE;
|
|
|
|
+ cfghi = req->periph_id << (43 - 32);
|
2007-06-08 13:44:01 +03:00
|
|
|
+ break;
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case DMA_DIR_PERIPH_TO_MEM:
|
|
|
|
+ direction = DMA_FROM_DEVICE;
|
|
|
|
+ cfghi = req->periph_id << (39 - 32);
|
2007-06-08 13:44:01 +03:00
|
|
|
+ break;
|
|
|
|
+ default:
|
2008-02-07 22:08:19 +02:00
|
|
|
+ goto out_unclaim_channel;
|
2007-06-08 13:44:01 +03:00
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chan->direction = direction;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ctlhi = block_size;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ctllo = ((req->direction << 20)
|
|
|
|
+ | (req->width << 4) | (req->width << 1)
|
|
|
|
+ | (1 << 0)); // interrupt enable
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ {
|
|
|
|
+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = -ENOMEM;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ chan->block = allocate_blocks(dmac, req->periods);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!chan->block)
|
|
|
|
+ goto out_unclaim_channel;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (direction == DMA_TO_DEVICE)
|
|
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
|
|
|
|
+ else
|
|
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * Set up a linked list items where each period gets
|
|
|
|
+ * an item. The linked list item for the last period
|
|
|
|
+ * points back to the star of the buffer making a
|
|
|
|
+ * cyclic buffer.
|
2008-02-07 22:08:19 +02:00
|
|
|
+ */
|
2008-06-13 00:13:40 +03:00
|
|
|
+ for (i = 0; i < req->periods; i++) {
|
2008-02-07 22:08:19 +02:00
|
|
|
+ lli = chan->block[i].lli_vaddr;
|
|
|
|
+ if (lli_prev) {
|
|
|
|
+ lli_prev->llp = chan->block[i].lli_dma_addr;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
|
|
+ chan->block[i - 1].lli_dma_addr,
|
|
|
|
+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
|
|
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);*/
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
|
|
|
+ lli->llp = 0;
|
|
|
|
+ lli->ctllo = ctllo;
|
|
|
|
+ lli->ctlhi = ctlhi;
|
|
|
|
+ if (direction == DMA_TO_DEVICE) {
|
2008-06-13 00:13:40 +03:00
|
|
|
+ lli->sar = req->buffer_start + i*(block_size << req->width);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ lli->dar = req->data_reg;
|
|
|
|
+ } else {
|
|
|
|
+ lli->sar = req->data_reg;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ lli->dar = req->buffer_start + i*(block_size << req->width);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
|
|
|
+ lli_prev = lli;
|
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ lli->llp = chan->block[0].lli_dma_addr;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
|
|
+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
|
|
|
|
+ lli_prev->dar, lli_prev->llp,
|
|
|
|
+ lli_prev->ctllo, lli_prev->ctlhi); */
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*
|
|
|
|
+ * SAR, DAR and CTL are initialized from the LLI. We
|
|
|
|
+ * only have to enable the LLI bits in CTL.
|
|
|
|
+ */
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
|
|
|
|
+ chan->block[0].lli_dma_addr);
|
|
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
|
|
|
|
+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
|
|
|
|
+ if (req->req.block_complete)
|
|
|
|
+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
|
|
+ else
|
|
|
|
+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
|
|
+
|
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+out_unclaim_channel:
|
|
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ return ret;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int dmac_start_request(struct dma_controller *_dmac,
|
|
|
|
+ unsigned int channel)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
|
|
|
+
|
|
|
|
+ set_channel_bit(dmac, CH_EN, channel);
|
|
|
|
+
|
|
|
|
+ return 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
|
|
|
|
+ unsigned int channel)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ dma_addr_t current_pos;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chan = &dmac->channel[channel];
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (chan->direction) {
|
|
|
|
+ case DMA_TO_DEVICE:
|
|
|
|
+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
|
|
|
|
+ break;
|
|
|
|
+ case DMA_FROM_DEVICE:
|
|
|
|
+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ return 0;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!current_pos) {
|
|
|
|
+ if (chan->is_cyclic) {
|
|
|
|
+ current_pos = chan->req_cyclic->buffer_start;
|
|
|
|
+ } else {
|
|
|
|
+ current_pos = chan->req_sg->sg->dma_address;
|
|
|
|
+ }
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return current_pos;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int dmac_stop_request(struct dma_controller *_dmac,
|
|
|
|
+ unsigned int channel)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
|
|
+ struct dw_dma_channel *chan;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chan = &dmac->channel[channel];
|
|
|
|
+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
|
|
|
|
+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
|
|
|
|
+ dmac_chan_readl_lo(dmac, channel, DAR),
|
|
|
|
+ dmac_chan_readl_lo(dmac, channel, LLP),
|
|
|
|
+ dmac_chan_readl_hi(dmac, channel, CTL),
|
|
|
|
+ dmac_chan_readl_lo(dmac, channel, CTL));
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (chan->state == CH_STATE_BUSY) {
|
|
|
|
+ clear_channel_bit(dmac, CH_EN, channel);
|
|
|
|
+ cleanup_channel(dmac, &dmac->channel[channel]);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void dmac_block_complete(struct dw_dma_controller *dmac)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ unsigned long status, chanid;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ while (status) {
|
|
|
|
+ struct dma_request *req;
|
|
|
|
+ chanid = __ffs(status);
|
|
|
|
+ chan = &dmac->channel[chanid];
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (chan->is_cyclic) {
|
|
|
|
+ BUG_ON(!chan->req_cyclic
|
|
|
|
+ || !chan->req_cyclic->req.block_complete);
|
|
|
|
+ req = &chan->req_cyclic->req;
|
|
|
|
+ } else {
|
|
|
|
+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
|
|
|
|
+ req = &chan->req_sg->req;
|
|
|
|
+ }
|
|
|
|
+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
|
|
|
|
+ req->block_complete(req);
|
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
|
|
|
|
+ }
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
|
|
|
|
+{
|
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ struct dma_request *req;
|
|
|
|
+ unsigned long status, chanid;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ while (status) {
|
|
|
|
+ chanid = __ffs(status);
|
|
|
|
+ chan = &dmac->channel[chanid];
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ req = &chan->req_sg->req;
|
|
|
|
+ BUG_ON(!req);
|
|
|
|
+ cleanup_channel(dmac, chan);
|
|
|
|
+ if (req->xfer_complete)
|
|
|
|
+ req->xfer_complete(req);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void dmac_error(struct dw_dma_controller *dmac)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dw_dma_channel *chan;
|
|
|
|
+ unsigned long status, chanid;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_ERROR);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ while (status) {
|
|
|
|
+ struct dma_request *req;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chanid = __ffs(status);
|
|
|
|
+ chan = &dmac->channel[chanid];
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
|
|
|
|
+ clear_channel_bit(dmac, CH_EN, chanid);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (chan->is_cyclic) {
|
|
|
|
+ BUG_ON(!chan->req_cyclic);
|
|
|
|
+ req = &chan->req_cyclic->req;
|
|
|
|
+ } else {
|
|
|
|
+ BUG_ON(!chan->req_sg);
|
|
|
|
+ req = &chan->req_sg->req;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ cleanup_channel(dmac, chan);
|
|
|
|
+ if (req->error)
|
|
|
|
+ req->error(req);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dw_dma_controller *dmac = dev_id;
|
|
|
|
+ unsigned long status;
|
|
|
|
+ int ret = IRQ_NONE;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock(&dmac->lock);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_INT);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ while (status) {
|
|
|
|
+ ret = IRQ_HANDLED;
|
|
|
|
+ if (status & 0x10)
|
|
|
|
+ dmac_error(dmac);
|
|
|
|
+ if (status & 0x02)
|
|
|
|
+ dmac_block_complete(dmac);
|
|
|
|
+ if (status & 0x01)
|
|
|
|
+ dmac_xfer_complete(dmac);
|
|
|
|
+
|
|
|
|
+ status = dmac_readl_lo(dmac, STATUS_INT);
|
2007-06-08 13:44:01 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_unlock(&dmac->lock);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ return ret;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __devinit dmac_probe(struct platform_device *pdev)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dw_dma_controller *dmac;
|
|
|
|
+ struct resource *regs;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ int ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs)
|
|
|
|
+ return -ENXIO;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
|
|
|
|
+ if (!dmac)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+ memset(dmac, 0, sizeof(*dmac));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac->hclk = clk_get(&pdev->dev, "hclk");
|
|
|
|
+ if (IS_ERR(dmac->hclk)) {
|
|
|
|
+ ret = PTR_ERR(dmac->hclk);
|
|
|
|
+ goto out_free_dmac;
|
2007-06-08 13:44:01 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ clk_enable(dmac->hclk);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
|
|
|
|
+ sizeof(struct dw_dma_lli), 4, 0);
|
|
|
|
+ if (!dmac->lli_pool)
|
|
|
|
+ goto out_disable_clk;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock_init(&dmac->lock);
|
|
|
|
+ dmac->dma.dev = &pdev->dev;
|
|
|
|
+ dmac->dma.alloc_channel = dmac_alloc_channel;
|
|
|
|
+ dmac->dma.release_channel = dmac_release_channel;
|
|
|
|
+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
|
|
|
|
+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
|
|
|
|
+ dmac->dma.start_request = dmac_start_request;
|
|
|
|
+ dmac->dma.stop_request = dmac_stop_request;
|
|
|
|
+ dmac->dma.get_current_pos = dmac_get_current_pos;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!dmac->regs)
|
|
|
|
+ goto out_free_pool;
|
|
|
|
+
|
|
|
|
+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
|
|
|
|
+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ if (ret)
|
2008-02-07 22:08:19 +02:00
|
|
|
+ goto out_unmap_regs;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Enable the DMA controller */
|
|
|
|
+ dmac_writel_lo(dmac, CFG, 1);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ register_dma_controller(&dmac->dma);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ printk(KERN_INFO
|
|
|
|
+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
|
|
|
|
+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2007-07-12 17:11:31 +03:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+out_unmap_regs:
|
|
|
|
+ iounmap(dmac->regs);
|
|
|
|
+out_free_pool:
|
|
|
|
+ dma_pool_destroy(dmac->lli_pool);
|
|
|
|
+out_disable_clk:
|
|
|
|
+ clk_disable(dmac->hclk);
|
|
|
|
+ clk_put(dmac->hclk);
|
|
|
|
+out_free_dmac:
|
|
|
|
+ kfree(dmac);
|
2007-07-12 17:11:31 +03:00
|
|
|
+ return ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct platform_driver dmac_driver = {
|
|
|
|
+ .probe = dmac_probe,
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "dmaca",
|
2007-07-12 17:11:31 +03:00
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __init dmac_init(void)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return platform_driver_register(&dmac_driver);
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+subsys_initcall(dmac_init);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void __exit dmac_exit(void)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ platform_driver_unregister(&dmac_driver);
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+module_exit(dmac_exit);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
|
|
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
|
|
|
+MODULE_LICENSE("GPL");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/drivers/dw-dmac.h
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,42 @@
|
|
|
|
+/*
|
|
|
|
+ * Driver for the Synopsys DesignWare DMA Controller
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#ifndef __AVR32_DW_DMAC_H__
|
|
|
|
+#define __AVR32_DW_DMAC_H__
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_CFG 0x398
|
|
|
|
+#define DW_DMAC_CH_EN 0x3a0
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_STATUS_XFER 0x2e8
|
|
|
|
+#define DW_DMAC_STATUS_BLOCK 0x2f0
|
|
|
|
+#define DW_DMAC_STATUS_ERROR 0x308
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_MASK_XFER 0x310
|
|
|
|
+#define DW_DMAC_MASK_BLOCK 0x318
|
|
|
|
+#define DW_DMAC_MASK_ERROR 0x330
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_CLEAR_XFER 0x338
|
|
|
|
+#define DW_DMAC_CLEAR_BLOCK 0x340
|
|
|
|
+#define DW_DMAC_CLEAR_ERROR 0x358
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_STATUS_INT 0x360
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DW_DMAC_CHAN_SAR 0x000
|
|
|
|
+#define DW_DMAC_CHAN_DAR 0x008
|
|
|
|
+#define DW_DMAC_CHAN_LLP 0x010
|
|
|
|
+#define DW_DMAC_CHAN_CTL 0x018
|
|
|
|
+#define DW_DMAC_CHAN_SSTAT 0x020
|
|
|
|
+#define DW_DMAC_CHAN_DSTAT 0x028
|
|
|
|
+#define DW_DMAC_CHAN_SSTATAR 0x030
|
|
|
|
+#define DW_DMAC_CHAN_DSTATAR 0x038
|
|
|
|
+#define DW_DMAC_CHAN_CFG 0x040
|
|
|
|
+#define DW_DMAC_CHAN_SGR 0x048
|
|
|
|
+#define DW_DMAC_CHAN_DSR 0x050
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#endif /* __AVR32_DW_DMAC_H__ */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/arch/avr32/kernel/Makefile
|
|
|
|
+++ b/arch/avr32/kernel/Makefile
|
|
|
|
@@ -9,6 +9,7 @@
|
|
|
|
obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
|
|
|
|
obj-y += signal.o sys_avr32.o process.o time.o
|
|
|
|
obj-y += init_task.o switch_to.o cpu.o
|
|
|
|
+obj-y += dma-controller.o
|
|
|
|
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
|
|
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/avr32_ksyms.c
|
|
|
|
+++ b/arch/avr32/kernel/avr32_ksyms.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -29,7 +29,9 @@
|
|
|
|
*/
|
|
|
|
EXPORT_SYMBOL(memset);
|
|
|
|
EXPORT_SYMBOL(memcpy);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
EXPORT_SYMBOL(clear_page);
|
|
|
|
+EXPORT_SYMBOL(copy_page);
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
/*
|
|
|
|
* Userspace access stuff.
|
|
|
|
@@ -41,6 +43,8 @@
|
|
|
|
EXPORT_SYMBOL(__strncpy_from_user);
|
|
|
|
EXPORT_SYMBOL(clear_user);
|
|
|
|
EXPORT_SYMBOL(__clear_user);
|
|
|
|
+EXPORT_SYMBOL(strnlen_user);
|
|
|
|
+
|
|
|
|
EXPORT_SYMBOL(csum_partial);
|
|
|
|
EXPORT_SYMBOL(csum_partial_copy_generic);
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/kernel/dma-controller.c
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,34 @@
|
|
|
|
+/*
|
|
|
|
+ * Preliminary DMA controller framework for AVR32
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <asm/dma-controller.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static LIST_HEAD(controllers);
|
|
|
|
+
|
|
|
|
+int register_dma_controller(struct dma_controller *dmac)
|
|
|
|
+{
|
|
|
|
+ static int next_id;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac->id = next_id++;
|
|
|
|
+ list_add_tail(&dmac->list, &controllers);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+EXPORT_SYMBOL(register_dma_controller);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_controller *find_dma_controller(int id)
|
|
|
|
+{
|
|
|
|
+ struct dma_controller *dmac;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ list_for_each_entry(dmac, &controllers, list)
|
|
|
|
+ if (dmac->id == id)
|
|
|
|
+ return dmac;
|
|
|
|
+ return NULL;
|
|
|
|
+}
|
|
|
|
+EXPORT_SYMBOL(find_dma_controller);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/entry-avr32b.S
|
|
|
|
+++ b/arch/avr32/kernel/entry-avr32b.S
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -74,50 +74,41 @@
|
|
|
|
.align 2
|
|
|
|
bral do_dtlb_modified
|
|
|
|
|
|
|
|
- /*
|
|
|
|
- * r0 : PGD/PT/PTE
|
|
|
|
- * r1 : Offending address
|
|
|
|
- * r2 : Scratch register
|
|
|
|
- * r3 : Cause (5, 12 or 13)
|
|
|
|
- */
|
|
|
|
#define tlbmiss_save pushm r0-r3
|
|
|
|
#define tlbmiss_restore popm r0-r3
|
|
|
|
|
|
|
|
- .section .tlbx.ex.text,"ax",@progbits
|
|
|
|
+ .org 0x50
|
|
|
|
.global itlb_miss
|
|
|
|
itlb_miss:
|
|
|
|
tlbmiss_save
|
|
|
|
rjmp tlb_miss_common
|
|
|
|
|
|
|
|
- .section .tlbr.ex.text,"ax",@progbits
|
|
|
|
+ .org 0x60
|
|
|
|
dtlb_miss_read:
|
|
|
|
tlbmiss_save
|
|
|
|
rjmp tlb_miss_common
|
|
|
|
|
|
|
|
- .section .tlbw.ex.text,"ax",@progbits
|
|
|
|
+ .org 0x70
|
|
|
|
dtlb_miss_write:
|
|
|
|
tlbmiss_save
|
|
|
|
|
|
|
|
.global tlb_miss_common
|
|
|
|
+ .align 2
|
|
|
|
tlb_miss_common:
|
|
|
|
mfsr r0, SYSREG_TLBEAR
|
|
|
|
mfsr r1, SYSREG_PTBR
|
|
|
|
|
|
|
|
- /* Is it the vmalloc space? */
|
|
|
|
- bld r0, 31
|
|
|
|
- brcs handle_vmalloc_miss
|
|
|
|
-
|
|
|
|
- /* First level lookup */
|
|
|
|
+ /*
|
|
|
|
+ * First level lookup: The PGD contains virtual pointers to
|
|
|
|
+ * the second-level page tables, but they may be NULL if not
|
|
|
|
+ * present.
|
|
|
|
+ */
|
|
|
|
pgtbl_lookup:
|
|
|
|
lsr r2, r0, PGDIR_SHIFT
|
|
|
|
ld.w r3, r1[r2 << 2]
|
|
|
|
bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
|
|
|
|
- bld r3, _PAGE_BIT_PRESENT
|
|
|
|
- brcc page_table_not_present
|
|
|
|
-
|
|
|
|
- /* Translate to virtual address in P1. */
|
|
|
|
- andl r3, 0xf000
|
|
|
|
- sbr r3, 31
|
|
|
|
+ cp.w r3, 0
|
|
|
|
+ breq page_table_not_present
|
|
|
|
|
|
|
|
/* Second level lookup */
|
|
|
|
ld.w r2, r3[r1 << 2]
|
|
|
|
@@ -148,16 +139,55 @@
|
|
|
|
tlbmiss_restore
|
|
|
|
rete
|
|
|
|
|
|
|
|
-handle_vmalloc_miss:
|
|
|
|
- /* Simply do the lookup in init's page table */
|
|
|
|
+ /* The slow path of the TLB miss handler */
|
|
|
|
+ .align 2
|
|
|
|
+page_table_not_present:
|
|
|
|
+ /* Do we need to synchronize with swapper_pg_dir? */
|
|
|
|
+ bld r0, 31
|
|
|
|
+ brcs sync_with_swapper_pg_dir
|
|
|
|
+
|
|
|
|
+page_not_present:
|
|
|
|
+ tlbmiss_restore
|
|
|
|
+ sub sp, 4
|
|
|
|
+ stmts --sp, r0-lr
|
|
|
|
+ rcall save_full_context_ex
|
|
|
|
+ mfsr r12, SYSREG_ECR
|
|
|
|
+ mov r11, sp
|
|
|
|
+ rcall do_page_fault
|
|
|
|
+ rjmp ret_from_exception
|
|
|
|
+
|
|
|
|
+ .align 2
|
|
|
|
+sync_with_swapper_pg_dir:
|
|
|
|
+ /*
|
|
|
|
+ * If swapper_pg_dir contains a non-NULL second-level page
|
|
|
|
+ * table pointer, copy it into the current PGD. If not, we
|
|
|
|
+ * must handle it as a full-blown page fault.
|
|
|
|
+ *
|
|
|
|
+ * Jumping back to pgtbl_lookup causes an unnecessary lookup,
|
|
|
|
+ * but it is guaranteed to be a cache hit, it won't happen
|
|
|
|
+ * very often, and we absolutely do not want to sacrifice any
|
|
|
|
+ * performance in the fast path in order to improve this.
|
|
|
|
+ */
|
|
|
|
mov r1, lo(swapper_pg_dir)
|
|
|
|
orh r1, hi(swapper_pg_dir)
|
|
|
|
+ ld.w r3, r1[r2 << 2]
|
|
|
|
+ cp.w r3, 0
|
|
|
|
+ breq page_not_present
|
|
|
|
+ mfsr r1, SYSREG_PTBR
|
|
|
|
+ st.w r1[r2 << 2], r3
|
|
|
|
rjmp pgtbl_lookup
|
|
|
|
|
|
|
|
+ /*
|
|
|
|
+ * We currently have two bytes left at this point until we
|
|
|
|
+ * crash into the system call handler...
|
|
|
|
+ *
|
|
|
|
+ * Don't worry, the assembler will let us know.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
|
|
|
|
/* --- System Call --- */
|
|
|
|
|
|
|
|
- .section .scall.text,"ax",@progbits
|
|
|
|
+ .org 0x100
|
|
|
|
system_call:
|
|
|
|
#ifdef CONFIG_PREEMPT
|
|
|
|
mask_interrupts
|
|
|
|
@@ -266,18 +296,6 @@
|
|
|
|
brcc syscall_exit_cont
|
|
|
|
rjmp enter_monitor_mode
|
|
|
|
|
|
|
|
- /* The slow path of the TLB miss handler */
|
|
|
|
-page_table_not_present:
|
|
|
|
-page_not_present:
|
|
|
|
- tlbmiss_restore
|
|
|
|
- sub sp, 4
|
|
|
|
- stmts --sp, r0-lr
|
|
|
|
- rcall save_full_context_ex
|
|
|
|
- mfsr r12, SYSREG_ECR
|
|
|
|
- mov r11, sp
|
|
|
|
- rcall do_page_fault
|
|
|
|
- rjmp ret_from_exception
|
|
|
|
-
|
|
|
|
/* This function expects to find offending PC in SYSREG_RAR_EX */
|
|
|
|
.type save_full_context_ex, @function
|
|
|
|
.align 2
|
|
|
|
@@ -741,26 +759,6 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
|
|
|
|
.section .irq.text,"ax",@progbits
|
|
|
|
|
|
|
|
-.global cpu_idle_sleep
|
|
|
|
-cpu_idle_sleep:
|
|
|
|
- mask_interrupts
|
|
|
|
- get_thread_info r8
|
|
|
|
- ld.w r9, r8[TI_flags]
|
|
|
|
- bld r9, TIF_NEED_RESCHED
|
|
|
|
- brcs cpu_idle_enable_int_and_exit
|
|
|
|
- sbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
|
|
- st.w r8[TI_flags], r9
|
|
|
|
- unmask_interrupts
|
|
|
|
- sleep 0
|
|
|
|
-cpu_idle_skip_sleep:
|
|
|
|
- mask_interrupts
|
|
|
|
- ld.w r9, r8[TI_flags]
|
|
|
|
- cbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
|
|
- st.w r8[TI_flags], r9
|
|
|
|
-cpu_idle_enable_int_and_exit:
|
|
|
|
- unmask_interrupts
|
|
|
|
- retal r12
|
|
|
|
-
|
|
|
|
.global irq_level0
|
|
|
|
.global irq_level1
|
|
|
|
.global irq_level2
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/process.c
|
|
|
|
+++ b/arch/avr32/kernel/process.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -18,11 +18,11 @@
|
|
|
|
#include <asm/sysreg.h>
|
|
|
|
#include <asm/ocd.h>
|
|
|
|
|
|
|
|
+#include <asm/arch/pm.h>
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
void (*pm_power_off)(void) = NULL;
|
|
|
|
EXPORT_SYMBOL(pm_power_off);
|
|
|
|
|
|
|
|
-extern void cpu_idle_sleep(void);
|
|
|
|
-
|
|
|
|
/*
|
|
|
|
* This file handles the architecture-dependent parts of process handling..
|
|
|
|
*/
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -54,6 +54,8 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
void machine_power_off(void)
|
2008-04-23 23:25:37 +03:00
|
|
|
{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (pm_power_off)
|
|
|
|
+ pm_power_off();
|
2008-04-23 23:25:37 +03:00
|
|
|
}
|
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
void machine_restart(char *cmd)
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/setup.c
|
|
|
|
+++ b/arch/avr32/kernel/setup.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -274,6 +274,8 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
printk(KERN_WARNING
|
|
|
|
"Failed to allocate framebuffer memory\n");
|
|
|
|
fbmem_size = 0;
|
|
|
|
+ } else {
|
|
|
|
+ memset(__va(fbmem_start), 0, fbmem_size);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/signal.c
|
|
|
|
+++ b/arch/avr32/kernel/signal.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -93,6 +93,9 @@
|
|
|
|
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
|
|
|
|
goto badframe;
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
|
|
|
|
+ goto badframe;
|
|
|
|
+
|
|
|
|
pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
|
|
|
|
regs->pc, regs->lr, regs->sp);
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/kernel/time.c
|
|
|
|
+++ b/arch/avr32/kernel/time.c
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1,233 +1,147 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2004-2007 Atmel Corporation
|
|
|
|
*
|
|
|
|
- * Based on MIPS implementation arch/mips/kernel/time.c
|
|
|
|
- * Copyright 2001 MontaVista Software Inc.
|
|
|
|
- *
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
-
|
|
|
|
#include <linux/clk.h>
|
|
|
|
-#include <linux/clocksource.h>
|
2008-07-05 17:49:07 +03:00
|
|
|
-#include <linux/time.h>
|
|
|
|
-#include <linux/module.h>
|
2008-04-23 23:25:37 +03:00
|
|
|
+#include <linux/clockchips.h>
|
2008-07-05 17:49:07 +03:00
|
|
|
+#include <linux/init.h>
|
2008-04-23 23:25:37 +03:00
|
|
|
#include <linux/interrupt.h>
|
2008-07-05 17:49:07 +03:00
|
|
|
#include <linux/irq.h>
|
|
|
|
-#include <linux/kernel_stat.h>
|
|
|
|
-#include <linux/errno.h>
|
|
|
|
-#include <linux/init.h>
|
|
|
|
-#include <linux/profile.h>
|
|
|
|
-#include <linux/sysdev.h>
|
|
|
|
-#include <linux/err.h>
|
|
|
|
+#include <linux/kernel.h>
|
|
|
|
+#include <linux/time.h>
|
|
|
|
|
|
|
|
-#include <asm/div64.h>
|
|
|
|
#include <asm/sysreg.h>
|
|
|
|
-#include <asm/io.h>
|
|
|
|
-#include <asm/sections.h>
|
2008-04-23 23:25:37 +03:00
|
|
|
|
|
|
|
-/* how many counter cycles in a jiffy? */
|
|
|
|
-static u32 cycles_per_jiffy;
|
|
|
|
+#include <asm/arch/pm.h>
|
|
|
|
|
|
|
|
-/* the count value for the next timer interrupt */
|
|
|
|
-static u32 expirelo;
|
|
|
|
|
|
|
|
-cycle_t __weak read_cycle_count(void)
|
|
|
|
+static cycle_t read_cycle_count(void)
|
|
|
|
{
|
|
|
|
return (cycle_t)sysreg_read(COUNT);
|
|
|
|
}
|
|
|
|
|
|
|
|
-struct clocksource __weak clocksource_avr32 = {
|
|
|
|
- .name = "avr32",
|
|
|
|
- .rating = 350,
|
|
|
|
+/*
|
|
|
|
+ * The architectural cycle count registers are a fine clocksource unless
|
|
|
|
+ * the system idle loop use sleep states like "idle": the CPU cycles
|
|
|
|
+ * measured by COUNT (and COMPARE) don't happen during sleep states.
|
|
|
|
+ * Their duration also changes if cpufreq changes the CPU clock rate.
|
|
|
|
+ * So we rate the clocksource using COUNT as very low quality.
|
|
|
|
+ */
|
|
|
|
+static struct clocksource counter = {
|
|
|
|
+ .name = "avr32_counter",
|
|
|
|
+ .rating = 50,
|
|
|
|
.read = read_cycle_count,
|
|
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
|
|
.shift = 16,
|
|
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
|
|
};
|
|
|
|
|
|
|
|
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
|
|
|
|
-
|
|
|
|
-struct irqaction timer_irqaction = {
|
|
|
|
- .handler = timer_interrupt,
|
|
|
|
- .flags = IRQF_DISABLED,
|
|
|
|
- .name = "timer",
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * By default we provide the null RTC ops
|
|
|
|
- */
|
|
|
|
-static unsigned long null_rtc_get_time(void)
|
2008-07-05 17:49:07 +03:00
|
|
|
-{
|
2008-04-23 23:25:37 +03:00
|
|
|
- return mktime(2007, 1, 1, 0, 0, 0);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static int null_rtc_set_time(unsigned long sec)
|
2008-07-05 17:49:07 +03:00
|
|
|
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
2008-04-23 23:25:37 +03:00
|
|
|
- return 0;
|
|
|
|
-}
|
2008-07-05 17:49:07 +03:00
|
|
|
-
|
2008-04-23 23:25:37 +03:00
|
|
|
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
|
|
|
|
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
|
2008-07-05 17:49:07 +03:00
|
|
|
+ struct clock_event_device *evdev = dev_id;
|
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
-static void avr32_timer_ack(void)
|
|
|
|
-{
|
|
|
|
- u32 count;
|
|
|
|
-
|
|
|
|
- /* Ack this timer interrupt and set the next one */
|
|
|
|
- expirelo += cycles_per_jiffy;
|
|
|
|
- /* setting COMPARE to 0 stops the COUNT-COMPARE */
|
|
|
|
- if (expirelo == 0) {
|
|
|
|
- sysreg_write(COMPARE, expirelo + 1);
|
|
|
|
- } else {
|
|
|
|
- sysreg_write(COMPARE, expirelo);
|
|
|
|
- }
|
|
|
|
+ /*
|
|
|
|
+ * Disable the interrupt until the clockevent subsystem
|
|
|
|
+ * reprograms it.
|
|
|
|
+ */
|
|
|
|
+ sysreg_write(COMPARE, 0);
|
|
|
|
|
|
|
|
- /* Check to see if we have missed any timer interrupts */
|
|
|
|
- count = sysreg_read(COUNT);
|
|
|
|
- if ((count - expirelo) < 0x7fffffff) {
|
|
|
|
- expirelo = count + cycles_per_jiffy;
|
|
|
|
- sysreg_write(COMPARE, expirelo);
|
|
|
|
- }
|
|
|
|
+ evdev->event_handler(evdev);
|
|
|
|
+ return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
-int __weak avr32_hpt_init(void)
|
|
|
|
-{
|
|
|
|
- int ret;
|
|
|
|
- unsigned long mult, shift, count_hz;
|
|
|
|
-
|
|
|
|
- count_hz = clk_get_rate(boot_cpu_data.clk);
|
|
|
|
- shift = clocksource_avr32.shift;
|
|
|
|
- mult = clocksource_hz2mult(count_hz, shift);
|
|
|
|
- clocksource_avr32.mult = mult;
|
|
|
|
-
|
|
|
|
- {
|
|
|
|
- u64 tmp;
|
|
|
|
-
|
|
|
|
- tmp = TICK_NSEC;
|
|
|
|
- tmp <<= shift;
|
|
|
|
- tmp += mult / 2;
|
|
|
|
- do_div(tmp, mult);
|
|
|
|
-
|
|
|
|
- cycles_per_jiffy = tmp;
|
|
|
|
- }
|
|
|
|
+static struct irqaction timer_irqaction = {
|
|
|
|
+ .handler = timer_interrupt,
|
|
|
|
+ .flags = IRQF_TIMER | IRQF_DISABLED,
|
|
|
|
+ .name = "avr32_comparator",
|
|
|
|
+};
|
|
|
|
|
|
|
|
- ret = setup_irq(0, &timer_irqaction);
|
|
|
|
- if (ret) {
|
|
|
|
- pr_debug("timer: could not request IRQ 0: %d\n", ret);
|
|
|
|
- return -ENODEV;
|
|
|
|
- }
|
|
|
|
+static int comparator_next_event(unsigned long delta,
|
|
|
|
+ struct clock_event_device *evdev)
|
|
|
|
+{
|
|
|
|
+ unsigned long flags;
|
|
|
|
|
|
|
|
- printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
|
|
|
|
- "%lu.%03lu MHz\n",
|
|
|
|
- ((count_hz + 500) / 1000) / 1000,
|
|
|
|
- ((count_hz + 500) / 1000) % 1000);
|
|
|
|
+ raw_local_irq_save(flags);
|
|
|
|
|
|
|
|
- return 0;
|
|
|
|
-}
|
|
|
|
+ /* The time to read COUNT then update COMPARE must be less
|
|
|
|
+ * than the min_delta_ns value for this clockevent source.
|
|
|
|
+ */
|
|
|
|
+ sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
|
|
|
|
|
|
|
|
-/*
|
|
|
|
- * Taken from MIPS c0_hpt_timer_init().
|
|
|
|
- *
|
|
|
|
- * The reason COUNT is written twice is probably to make sure we don't get any
|
|
|
|
- * timer interrupts while we are messing with the counter.
|
|
|
|
- */
|
|
|
|
-int __weak avr32_hpt_start(void)
|
|
|
|
-{
|
|
|
|
- u32 count = sysreg_read(COUNT);
|
|
|
|
- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
|
|
|
|
- sysreg_write(COUNT, expirelo - cycles_per_jiffy);
|
|
|
|
- sysreg_write(COMPARE, expirelo);
|
|
|
|
- sysreg_write(COUNT, count);
|
|
|
|
+ raw_local_irq_restore(flags);
|
2007-07-12 17:11:31 +03:00
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
return 0;
|
|
|
|
}
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
-/*
|
|
|
|
- * local_timer_interrupt() does profiling and process accounting on a
|
|
|
|
- * per-CPU basis.
|
|
|
|
- *
|
|
|
|
- * In UP mode, it is invoked from the (global) timer_interrupt.
|
|
|
|
- */
|
|
|
|
-void local_timer_interrupt(int irq, void *dev_id)
|
|
|
|
+static void comparator_mode(enum clock_event_mode mode,
|
|
|
|
+ struct clock_event_device *evdev)
|
2008-02-07 22:08:19 +02:00
|
|
|
{
|
2008-04-23 23:25:37 +03:00
|
|
|
- if (current->pid)
|
|
|
|
- profile_tick(CPU_PROFILING);
|
|
|
|
- update_process_times(user_mode(get_irq_regs()));
|
|
|
|
+ switch (mode) {
|
|
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
|
|
+ pr_debug("%s: start\n", evdev->name);
|
|
|
|
+ /* FALLTHROUGH */
|
|
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
|
|
+ cpu_disable_idle_sleep();
|
|
|
|
+ break;
|
|
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
|
|
+ sysreg_write(COMPARE, 0);
|
|
|
|
+ pr_debug("%s: stop\n", evdev->name);
|
|
|
|
+ cpu_enable_idle_sleep();
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ BUG();
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
}
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
|
|
|
|
-{
|
|
|
|
- /* ack timer interrupt and try to set next interrupt */
|
|
|
|
- avr32_timer_ack();
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * Call the generic timer interrupt handler
|
|
|
|
- */
|
|
|
|
- write_seqlock(&xtime_lock);
|
|
|
|
- do_timer(1);
|
|
|
|
- write_sequnlock(&xtime_lock);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * In UP mode, we call local_timer_interrupt() to do profiling
|
|
|
|
- * and process accounting.
|
|
|
|
- *
|
|
|
|
- * SMP is not supported yet.
|
|
|
|
- */
|
|
|
|
- local_timer_interrupt(irq, dev_id);
|
|
|
|
-
|
|
|
|
- return IRQ_HANDLED;
|
|
|
|
-}
|
|
|
|
+static struct clock_event_device comparator = {
|
|
|
|
+ .name = "avr32_comparator",
|
|
|
|
+ .features = CLOCK_EVT_FEAT_ONESHOT,
|
|
|
|
+ .shift = 16,
|
|
|
|
+ .rating = 50,
|
|
|
|
+ .cpumask = CPU_MASK_CPU0,
|
|
|
|
+ .set_next_event = comparator_next_event,
|
|
|
|
+ .set_mode = comparator_mode,
|
|
|
|
+};
|
|
|
|
|
|
|
|
void __init time_init(void)
|
2007-10-16 15:22:57 +03:00
|
|
|
{
|
2008-04-23 23:25:37 +03:00
|
|
|
+ unsigned long counter_hz;
|
2008-02-07 22:08:19 +02:00
|
|
|
int ret;
|
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
- /*
|
|
|
|
- * Make sure we don't get any COMPARE interrupts before we can
|
|
|
|
- * handle them.
|
|
|
|
- */
|
|
|
|
- sysreg_write(COMPARE, 0);
|
2007-10-16 15:22:57 +03:00
|
|
|
-
|
2008-04-23 23:25:37 +03:00
|
|
|
- xtime.tv_sec = rtc_get_time();
|
|
|
|
+ xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
|
|
|
|
xtime.tv_nsec = 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
set_normalized_timespec(&wall_to_monotonic,
|
|
|
|
-xtime.tv_sec, -xtime.tv_nsec);
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
- ret = avr32_hpt_init();
|
|
|
|
- if (ret) {
|
|
|
|
- pr_debug("timer: failed setup: %d\n", ret);
|
|
|
|
- return;
|
2008-02-07 22:08:19 +02:00
|
|
|
- }
|
2008-04-23 23:25:37 +03:00
|
|
|
+ /* figure rate for counter */
|
|
|
|
+ counter_hz = clk_get_rate(boot_cpu_data.clk);
|
|
|
|
+ counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
|
|
|
|
|
|
|
|
- ret = clocksource_register(&clocksource_avr32);
|
|
|
|
+ ret = clocksource_register(&counter);
|
|
|
|
if (ret)
|
|
|
|
pr_debug("timer: could not register clocksource: %d\n", ret);
|
|
|
|
|
|
|
|
- ret = avr32_hpt_start();
|
|
|
|
- if (ret) {
|
|
|
|
- pr_debug("timer: failed starting: %d\n", ret);
|
|
|
|
- return;
|
|
|
|
- }
|
|
|
|
-}
|
|
|
|
+ /* setup COMPARE clockevent */
|
|
|
|
+ comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
|
|
|
|
+ comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
|
|
|
|
+ comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
|
2007-10-16 15:22:57 +03:00
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
-static struct sysdev_class timer_class = {
|
2008-06-13 00:13:40 +03:00
|
|
|
- .name = "timer",
|
2008-04-23 23:25:37 +03:00
|
|
|
-};
|
|
|
|
+ sysreg_write(COMPARE, 0);
|
|
|
|
+ timer_irqaction.dev_id = &comparator;
|
|
|
|
|
|
|
|
-static struct sys_device timer_device = {
|
|
|
|
- .id = 0,
|
|
|
|
- .cls = &timer_class,
|
|
|
|
-};
|
|
|
|
+ ret = setup_irq(0, &timer_irqaction);
|
|
|
|
+ if (ret)
|
|
|
|
+ pr_debug("timer: could not request IRQ 0: %d\n", ret);
|
|
|
|
+ else {
|
|
|
|
+ clockevents_register_device(&comparator);
|
|
|
|
|
|
|
|
-static int __init init_timer_sysfs(void)
|
|
|
|
-{
|
|
|
|
- int err = sysdev_class_register(&timer_class);
|
|
|
|
- if (!err)
|
|
|
|
- err = sysdev_register(&timer_device);
|
|
|
|
- return err;
|
|
|
|
+ pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
|
|
|
|
+ ((counter_hz + 500) / 1000) / 1000,
|
|
|
|
+ ((counter_hz + 500) / 1000) % 1000);
|
|
|
|
+ }
|
|
|
|
}
|
|
|
|
-
|
|
|
|
-device_initcall(init_timer_sysfs);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/arch/avr32/kernel/vmlinux.lds.S
|
|
|
|
+++ b/arch/avr32/kernel/vmlinux.lds.S
|
|
|
|
@@ -68,14 +68,6 @@
|
|
|
|
_evba = .;
|
|
|
|
_text = .;
|
|
|
|
*(.ex.text)
|
|
|
|
- . = 0x50;
|
|
|
|
- *(.tlbx.ex.text)
|
|
|
|
- . = 0x60;
|
|
|
|
- *(.tlbr.ex.text)
|
|
|
|
- . = 0x70;
|
|
|
|
- *(.tlbw.ex.text)
|
|
|
|
- . = 0x100;
|
|
|
|
- *(.scall.text)
|
|
|
|
*(.irq.text)
|
|
|
|
KPROBES_TEXT
|
|
|
|
TEXT_TEXT
|
|
|
|
@@ -107,6 +99,10 @@
|
|
|
|
*/
|
|
|
|
*(.data.init_task)
|
|
|
|
|
|
|
|
+ /* Then, the page-aligned data */
|
|
|
|
+ . = ALIGN(PAGE_SIZE);
|
|
|
|
+ *(.data.page_aligned)
|
|
|
|
+
|
|
|
|
/* Then, the cacheline aligned data */
|
|
|
|
. = ALIGN(L1_CACHE_BYTES);
|
|
|
|
*(.data.cacheline_aligned)
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/lib/io-readsb.S
|
|
|
|
+++ b/arch/avr32/lib/io-readsb.S
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -41,7 +41,7 @@
|
|
|
|
2: sub r10, -4
|
|
|
|
reteq r12
|
|
|
|
|
|
|
|
-3: ld.uh r8, r12[0]
|
|
|
|
+3: ld.ub r8, r12[0]
|
|
|
|
sub r10, 1
|
|
|
|
st.b r11++, r8
|
|
|
|
brne 3b
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/Kconfig
|
|
|
|
+++ b/arch/avr32/mach-at32ap/Kconfig
|
|
|
|
@@ -26,6 +26,13 @@
|
|
|
|
|
|
|
|
endchoice
|
|
|
|
|
|
|
|
+config GPIO_DEV
|
|
|
|
+ bool "GPIO /dev interface"
|
|
|
|
+ select CONFIGFS_FS
|
|
|
|
+ default n
|
|
|
|
+ help
|
|
|
|
+ Say `Y' to enable a /dev interface to the GPIO pins.
|
|
|
|
+
|
|
|
|
endmenu
|
|
|
|
|
|
|
|
endif # PLATFORM_AT32AP
|
|
|
|
--- a/arch/avr32/mach-at32ap/Makefile
|
|
|
|
+++ b/arch/avr32/mach-at32ap/Makefile
|
|
|
|
@@ -1,4 +1,9 @@
|
|
|
|
-obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
|
|
|
|
-obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
|
|
|
|
-obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
|
|
|
|
+obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
|
|
|
|
+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
|
|
|
|
obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
|
|
|
|
+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
|
|
|
|
+obj-$(CONFIG_PM) += pm.o
|
|
|
|
+
|
|
|
|
+ifeq ($(CONFIG_PM_DEBUG),y)
|
|
|
|
+CFLAGS_pm.o += -DDEBUG
|
|
|
|
+endif
|
|
|
|
--- a/arch/avr32/mach-at32ap/at32ap.c
|
|
|
|
+++ /dev/null
|
|
|
|
@@ -1,56 +0,0 @@
|
|
|
|
-/*
|
|
|
|
- * Copyright (C) 2006 Atmel Corporation
|
|
|
|
- *
|
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
|
|
- * published by the Free Software Foundation.
|
|
|
|
- */
|
|
|
|
-
|
|
|
|
-#include <linux/clk.h>
|
|
|
|
-#include <linux/err.h>
|
|
|
|
-#include <linux/init.h>
|
|
|
|
-#include <linux/platform_device.h>
|
|
|
|
-
|
|
|
|
-#include <asm/arch/init.h>
|
|
|
|
-
|
|
|
|
-void __init setup_platform(void)
|
|
|
|
-{
|
|
|
|
- at32_clock_init();
|
|
|
|
- at32_portmux_init();
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static int __init pdc_probe(struct platform_device *pdev)
|
|
|
|
-{
|
|
|
|
- struct clk *pclk, *hclk;
|
|
|
|
-
|
|
|
|
- pclk = clk_get(&pdev->dev, "pclk");
|
|
|
|
- if (IS_ERR(pclk)) {
|
|
|
|
- dev_err(&pdev->dev, "no pclk defined\n");
|
|
|
|
- return PTR_ERR(pclk);
|
|
|
|
- }
|
|
|
|
- hclk = clk_get(&pdev->dev, "hclk");
|
|
|
|
- if (IS_ERR(hclk)) {
|
|
|
|
- dev_err(&pdev->dev, "no hclk defined\n");
|
|
|
|
- clk_put(pclk);
|
|
|
|
- return PTR_ERR(hclk);
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- clk_enable(pclk);
|
|
|
|
- clk_enable(hclk);
|
|
|
|
-
|
|
|
|
- dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
|
|
|
|
- return 0;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static struct platform_driver pdc_driver = {
|
|
|
|
- .probe = pdc_probe,
|
|
|
|
- .driver = {
|
|
|
|
- .name = "pdc",
|
|
|
|
- },
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-static int __init pdc_init(void)
|
|
|
|
-{
|
|
|
|
- return platform_driver_register(&pdc_driver);
|
|
|
|
-}
|
|
|
|
-arch_initcall(pdc_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/at32ap700x.c
|
|
|
|
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -6,11 +6,13 @@
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
|
|
+#include <linux/delay.h>
|
|
|
|
#include <linux/fb.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
#include <linux/init.h>
|
2008-06-13 00:13:40 +03:00
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
+#include <linux/usb/atmel_usba_udc.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
@@ -18,6 +20,7 @@
|
|
|
|
#include <asm/arch/at32ap700x.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
|
|
#include <asm/arch/portmux.h>
|
|
|
|
+#include <asm/arch/sram.h>
|
|
|
|
|
|
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
|
|
|
|
@@ -91,25 +94,18 @@
|
|
|
|
|
|
|
|
static DEFINE_SPINLOCK(pm_lock);
|
2008-02-07 22:08:19 +02:00
|
|
|
|
|
|
|
-unsigned long at32ap7000_osc_rates[3] = {
|
|
|
|
- [0] = 32768,
|
|
|
|
- /* FIXME: these are ATSTK1002-specific */
|
|
|
|
- [1] = 20000000,
|
|
|
|
- [2] = 12000000,
|
|
|
|
-};
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct clk osc0;
|
|
|
|
+static struct clk osc1;
|
|
|
|
|
|
|
|
static unsigned long osc_get_rate(struct clk *clk)
|
|
|
|
{
|
2008-02-07 22:08:19 +02:00
|
|
|
- return at32ap7000_osc_rates[clk->index];
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return at32_board_osc_rates[clk->index];
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
|
|
|
|
{
|
|
|
|
unsigned long div, mul, rate;
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
- if (!(control & PM_BIT(PLLEN)))
|
|
|
|
- return 0;
|
|
|
|
-
|
2008-06-13 00:13:40 +03:00
|
|
|
div = PM_BFEXT(PLLDIV, control) + 1;
|
|
|
|
mul = PM_BFEXT(PLLMUL, control) + 1;
|
|
|
|
|
|
|
|
@@ -120,6 +116,71 @@
|
|
|
|
return rate;
|
|
|
|
}
|
|
|
|
|
|
|
|
+static long pll_set_rate(struct clk *clk, unsigned long rate,
|
|
|
|
+ u32 *pll_ctrl)
|
|
|
|
+{
|
|
|
|
+ unsigned long mul;
|
|
|
|
+ unsigned long mul_best_fit = 0;
|
|
|
|
+ unsigned long div;
|
|
|
|
+ unsigned long div_min;
|
|
|
|
+ unsigned long div_max;
|
|
|
|
+ unsigned long div_best_fit = 0;
|
|
|
|
+ unsigned long base;
|
|
|
|
+ unsigned long pll_in;
|
|
|
|
+ unsigned long actual = 0;
|
|
|
|
+ unsigned long rate_error;
|
|
|
|
+ unsigned long rate_error_prev = ~0UL;
|
|
|
|
+ u32 ctrl;
|
|
|
|
+
|
|
|
|
+ /* Rate must be between 80 MHz and 200 Mhz. */
|
|
|
|
+ if (rate < 80000000UL || rate > 200000000UL)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ ctrl = PM_BF(PLLOPT, 4);
|
|
|
|
+ base = clk->parent->get_rate(clk->parent);
|
|
|
|
+
|
|
|
|
+ /* PLL input frequency must be between 6 MHz and 32 MHz. */
|
|
|
|
+ div_min = DIV_ROUND_UP(base, 32000000UL);
|
|
|
|
+ div_max = base / 6000000UL;
|
|
|
|
+
|
|
|
|
+ if (div_max < div_min)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ for (div = div_min; div <= div_max; div++) {
|
|
|
|
+ pll_in = (base + div / 2) / div;
|
|
|
|
+ mul = (rate + pll_in / 2) / pll_in;
|
|
|
|
+
|
|
|
|
+ if (mul == 0)
|
|
|
|
+ continue;
|
|
|
|
+
|
|
|
|
+ actual = pll_in * mul;
|
|
|
|
+ rate_error = abs(actual - rate);
|
|
|
|
+
|
|
|
|
+ if (rate_error < rate_error_prev) {
|
|
|
|
+ mul_best_fit = mul;
|
|
|
|
+ div_best_fit = div;
|
|
|
|
+ rate_error_prev = rate_error;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (rate_error == 0)
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (div_best_fit == 0)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
|
|
|
|
+ ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
|
|
|
|
+ ctrl |= PM_BF(PLLCOUNT, 16);
|
|
|
|
+
|
|
|
|
+ if (clk->parent == &osc1)
|
|
|
|
+ ctrl |= PM_BIT(PLLOSC);
|
|
|
|
+
|
|
|
|
+ *pll_ctrl = ctrl;
|
|
|
|
+
|
|
|
|
+ return actual;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
static unsigned long pll0_get_rate(struct clk *clk)
|
|
|
|
{
|
|
|
|
u32 control;
|
|
|
|
@@ -129,6 +190,41 @@
|
|
|
|
return pll_get_rate(clk, control);
|
|
|
|
}
|
|
|
|
|
|
|
|
+static void pll1_mode(struct clk *clk, int enabled)
|
|
|
|
+{
|
|
|
|
+ unsigned long timeout;
|
|
|
|
+ u32 status;
|
|
|
|
+ u32 ctrl;
|
|
|
|
+
|
|
|
|
+ ctrl = pm_readl(PLL1);
|
|
|
|
+
|
|
|
|
+ if (enabled) {
|
|
|
|
+ if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
|
|
|
|
+ pr_debug("clk %s: failed to enable, rate not set\n",
|
|
|
|
+ clk->name);
|
|
|
|
+ return;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ ctrl |= PM_BIT(PLLEN);
|
|
|
|
+ pm_writel(PLL1, ctrl);
|
|
|
|
+
|
|
|
|
+ /* Wait for PLL lock. */
|
|
|
|
+ for (timeout = 10000; timeout; timeout--) {
|
|
|
|
+ status = pm_readl(ISR);
|
|
|
|
+ if (status & PM_BIT(LOCK1))
|
|
|
|
+ break;
|
|
|
|
+ udelay(10);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (!(status & PM_BIT(LOCK1)))
|
|
|
|
+ printk(KERN_ERR "clk %s: timeout waiting for lock\n",
|
|
|
|
+ clk->name);
|
|
|
|
+ } else {
|
|
|
|
+ ctrl &= ~PM_BIT(PLLEN);
|
|
|
|
+ pm_writel(PLL1, ctrl);
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
static unsigned long pll1_get_rate(struct clk *clk)
|
|
|
|
{
|
|
|
|
u32 control;
|
|
|
|
@@ -138,6 +234,49 @@
|
|
|
|
return pll_get_rate(clk, control);
|
|
|
|
}
|
|
|
|
|
|
|
|
+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
|
|
+{
|
|
|
|
+ u32 ctrl = 0;
|
|
|
|
+ unsigned long actual_rate;
|
|
|
|
+
|
|
|
|
+ actual_rate = pll_set_rate(clk, rate, &ctrl);
|
|
|
|
+
|
|
|
|
+ if (apply) {
|
|
|
|
+ if (actual_rate != rate)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ if (clk->users > 0)
|
|
|
|
+ return -EBUSY;
|
|
|
|
+ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
|
|
|
|
+ clk->name, rate, actual_rate);
|
|
|
|
+ pm_writel(PLL1, ctrl);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return actual_rate;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int pll1_set_parent(struct clk *clk, struct clk *parent)
|
|
|
|
+{
|
|
|
|
+ u32 ctrl;
|
|
|
|
+
|
|
|
|
+ if (clk->users > 0)
|
|
|
|
+ return -EBUSY;
|
|
|
|
+
|
|
|
|
+ ctrl = pm_readl(PLL1);
|
|
|
|
+ WARN_ON(ctrl & PM_BIT(PLLEN));
|
|
|
|
+
|
|
|
|
+ if (parent == &osc0)
|
|
|
|
+ ctrl &= ~PM_BIT(PLLOSC);
|
|
|
|
+ else if (parent == &osc1)
|
|
|
|
+ ctrl |= PM_BIT(PLLOSC);
|
|
|
|
+ else
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ pm_writel(PLL1, ctrl);
|
|
|
|
+ clk->parent = parent;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
/*
|
|
|
|
* The AT32AP7000 has five primary clock sources: One 32kHz
|
|
|
|
* oscillator, two crystal oscillators and two PLLs.
|
|
|
|
@@ -166,7 +305,10 @@
|
|
|
|
};
|
|
|
|
static struct clk pll1 = {
|
|
|
|
.name = "pll1",
|
|
|
|
+ .mode = pll1_mode,
|
|
|
|
.get_rate = pll1_get_rate,
|
|
|
|
+ .set_rate = pll1_set_rate,
|
|
|
|
+ .set_parent = pll1_set_parent,
|
|
|
|
.parent = &osc0,
|
|
|
|
};
|
|
|
|
|
|
|
|
@@ -534,6 +676,14 @@
|
|
|
|
.users = 1,
|
|
|
|
.index = 3,
|
|
|
|
};
|
|
|
|
+static struct clk sdramc_clk = {
|
|
|
|
+ .name = "sdramc_clk",
|
|
|
|
+ .parent = &pbb_clk,
|
|
|
|
+ .mode = pbb_clk_mode,
|
|
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
|
|
+ .users = 1,
|
|
|
|
+ .index = 14,
|
|
|
|
+};
|
|
|
|
|
|
|
|
static struct resource smc0_resource[] = {
|
|
|
|
PBMEM(0xfff03400),
|
|
|
|
@@ -605,19 +755,32 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
2008-02-07 22:08:19 +02:00
|
|
|
- * System Timer/Counter (TC)
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * Timer/Counter (TC)
|
|
|
|
* -------------------------------------------------------------------- */
|
2008-02-07 22:08:19 +02:00
|
|
|
-static struct resource at32_systc0_resource[] = {
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+static struct resource at32_tcb0_resource[] = {
|
|
|
|
PBMEM(0xfff00c00),
|
|
|
|
IRQ(22),
|
|
|
|
};
|
2008-02-07 22:08:19 +02:00
|
|
|
-struct platform_device at32_systc0_device = {
|
|
|
|
- .name = "systc",
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct platform_device at32_tcb0_device = {
|
|
|
|
+ .name = "atmel_tcb",
|
|
|
|
.id = 0,
|
2008-02-07 22:08:19 +02:00
|
|
|
- .resource = at32_systc0_resource,
|
|
|
|
- .num_resources = ARRAY_SIZE(at32_systc0_resource),
|
2008-06-13 00:13:40 +03:00
|
|
|
+ .resource = at32_tcb0_resource,
|
|
|
|
+ .num_resources = ARRAY_SIZE(at32_tcb0_resource),
|
2008-07-05 17:49:07 +03:00
|
|
|
+};
|
2008-06-13 00:13:40 +03:00
|
|
|
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
|
|
|
|
+
|
|
|
|
+static struct resource at32_tcb1_resource[] = {
|
|
|
|
+ PBMEM(0xfff01000),
|
|
|
|
+ IRQ(23),
|
|
|
|
+};
|
|
|
|
+static struct platform_device at32_tcb1_device = {
|
|
|
|
+ .name = "atmel_tcb",
|
|
|
|
+ .id = 1,
|
|
|
|
+ .resource = at32_tcb1_resource,
|
|
|
|
+ .num_resources = ARRAY_SIZE(at32_tcb1_resource),
|
2008-07-05 17:49:07 +03:00
|
|
|
};
|
|
|
|
-DEV_CLK(pclk, at32_systc0, pbb, 3);
|
2008-06-13 00:13:40 +03:00
|
|
|
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
|
|
* PIO
|
|
|
|
@@ -669,7 +832,8 @@
|
|
|
|
platform_device_register(&pdc_device);
|
|
|
|
platform_device_register(&dmaca0_device);
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
- platform_device_register(&at32_systc0_device);
|
2008-06-13 00:13:40 +03:00
|
|
|
+ platform_device_register(&at32_tcb0_device);
|
|
|
|
+ platform_device_register(&at32_tcb1_device);
|
|
|
|
|
|
|
|
platform_device_register(&pio0_device);
|
|
|
|
platform_device_register(&pio1_device);
|
|
|
|
@@ -679,6 +843,81 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
|
|
+ * PSIF
|
|
|
|
+ * -------------------------------------------------------------------- */
|
|
|
|
+static struct resource atmel_psif0_resource[] __initdata = {
|
|
|
|
+ {
|
|
|
|
+ .start = 0xffe03c00,
|
|
|
|
+ .end = 0xffe03cff,
|
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
|
+ },
|
|
|
|
+ IRQ(18),
|
|
|
|
+};
|
|
|
|
+static struct clk atmel_psif0_pclk = {
|
|
|
|
+ .name = "pclk",
|
|
|
|
+ .parent = &pba_clk,
|
|
|
|
+ .mode = pba_clk_mode,
|
|
|
|
+ .get_rate = pba_clk_get_rate,
|
|
|
|
+ .index = 15,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct resource atmel_psif1_resource[] __initdata = {
|
|
|
|
+ {
|
|
|
|
+ .start = 0xffe03d00,
|
|
|
|
+ .end = 0xffe03dff,
|
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
|
+ },
|
|
|
|
+ IRQ(18),
|
|
|
|
+};
|
|
|
|
+static struct clk atmel_psif1_pclk = {
|
|
|
|
+ .name = "pclk",
|
|
|
|
+ .parent = &pba_clk,
|
|
|
|
+ .mode = pba_clk_mode,
|
|
|
|
+ .get_rate = pba_clk_get_rate,
|
|
|
|
+ .index = 15,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct platform_device *__init at32_add_device_psif(unsigned int id)
|
|
|
|
+{
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+
|
|
|
|
+ if (!(id == 0 || id == 1))
|
|
|
|
+ return NULL;
|
|
|
|
+
|
|
|
|
+ pdev = platform_device_alloc("atmel_psif", id);
|
|
|
|
+ if (!pdev)
|
|
|
|
+ return NULL;
|
|
|
|
+
|
|
|
|
+ switch (id) {
|
|
|
|
+ case 0:
|
|
|
|
+ if (platform_device_add_resources(pdev, atmel_psif0_resource,
|
|
|
|
+ ARRAY_SIZE(atmel_psif0_resource)))
|
|
|
|
+ goto err_add_resources;
|
|
|
|
+ atmel_psif0_pclk.dev = &pdev->dev;
|
|
|
|
+ select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
|
|
|
|
+ select_peripheral(PA(9), PERIPH_A, 0); /* DATA */
|
|
|
|
+ break;
|
|
|
|
+ case 1:
|
|
|
|
+ if (platform_device_add_resources(pdev, atmel_psif1_resource,
|
|
|
|
+ ARRAY_SIZE(atmel_psif1_resource)))
|
|
|
|
+ goto err_add_resources;
|
|
|
|
+ atmel_psif1_pclk.dev = &pdev->dev;
|
|
|
|
+ select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
|
|
|
|
+ select_peripheral(PB(12), PERIPH_A, 0); /* DATA */
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ return NULL;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ platform_device_add(pdev);
|
|
|
|
+ return pdev;
|
|
|
|
+
|
|
|
|
+err_add_resources:
|
|
|
|
+ platform_device_put(pdev);
|
|
|
|
+ return NULL;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/* --------------------------------------------------------------------
|
|
|
|
* USART
|
|
|
|
* -------------------------------------------------------------------- */
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -951,7 +1190,8 @@
|
|
|
|
switch (id) {
|
|
|
|
case 0:
|
|
|
|
pdev = &atmel_spi0_device;
|
|
|
|
- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
|
|
|
|
+ /* pullup MISO so a level is always defined */
|
|
|
|
+ select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
|
|
|
|
select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
|
|
|
|
select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
|
|
|
|
at32_spi_setup_slaves(0, b, n, spi0_pins);
|
|
|
|
@@ -959,7 +1199,8 @@
|
|
|
|
|
|
|
|
case 1:
|
|
|
|
pdev = &atmel_spi1_device;
|
|
|
|
- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
|
|
|
|
+ /* pullup MISO so a level is always defined */
|
|
|
|
+ select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
|
|
|
|
select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
|
|
|
|
select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
|
|
|
|
at32_spi_setup_slaves(1, b, n, spi1_pins);
|
|
|
|
@@ -989,7 +1230,9 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
.index = 2,
|
|
|
|
};
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
-struct platform_device *__init at32_add_device_twi(unsigned int id)
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct platform_device *__init at32_add_device_twi(unsigned int id,
|
|
|
|
+ struct i2c_board_info *b,
|
|
|
|
+ unsigned int n)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1009,6 +1252,9 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
|
|
|
|
atmel_twi0_pclk.dev = &pdev->dev;
|
|
|
|
|
|
|
|
+ if (b)
|
|
|
|
+ i2c_register_board_info(id, b, n);
|
|
|
|
+
|
|
|
|
platform_device_add(pdev);
|
|
|
|
return pdev;
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1032,7 +1278,8 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
.index = 9,
|
|
|
|
};
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
-struct platform_device *__init at32_add_device_mci(unsigned int id)
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct platform_device *__init
|
|
|
|
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1041,11 +1288,15 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
|
|
|
|
pdev = platform_device_alloc("atmel_mci", id);
|
|
|
|
if (!pdev)
|
2008-02-07 22:08:19 +02:00
|
|
|
- return NULL;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ goto fail;
|
|
|
|
|
|
|
|
if (platform_device_add_resources(pdev, atmel_mci0_resource,
|
|
|
|
ARRAY_SIZE(atmel_mci0_resource)))
|
2008-02-07 22:08:19 +02:00
|
|
|
- goto err_add_resources;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ if (data && platform_device_add_data(pdev, data,
|
|
|
|
+ sizeof(struct mci_platform_data)))
|
|
|
|
+ goto fail;
|
|
|
|
|
|
|
|
select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
|
|
|
|
select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1054,12 +1305,19 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
|
|
|
|
select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
|
|
|
|
|
|
|
|
+ if (data) {
|
|
|
|
+ if (data->detect_pin != GPIO_PIN_NONE)
|
|
|
|
+ at32_select_gpio(data->detect_pin, 0);
|
|
|
|
+ if (data->wp_pin != GPIO_PIN_NONE)
|
|
|
|
+ at32_select_gpio(data->wp_pin, 0);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
atmel_mci0_pclk.dev = &pdev->dev;
|
|
|
|
|
|
|
|
platform_device_add(pdev);
|
|
|
|
return pdev;
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
-err_add_resources:
|
2008-06-13 00:13:40 +03:00
|
|
|
+fail:
|
|
|
|
platform_device_put(pdev);
|
|
|
|
return NULL;
|
|
|
|
}
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1097,7 +1355,8 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
|
|
|
|
struct platform_device *__init
|
|
|
|
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
|
2008-02-07 22:08:19 +02:00
|
|
|
- unsigned long fbmem_start, unsigned long fbmem_len)
|
2008-06-13 00:13:40 +03:00
|
|
|
+ unsigned long fbmem_start, unsigned long fbmem_len,
|
|
|
|
+ unsigned int pin_config)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
struct atmel_lcdfb_info *info;
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1124,37 +1383,77 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
switch (id) {
|
|
|
|
case 0:
|
|
|
|
pdev = &atmel_lcdfb0_device;
|
2008-02-07 22:08:19 +02:00
|
|
|
- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
|
|
|
|
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
|
|
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
|
|
- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
|
|
- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
|
|
|
|
- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
|
|
|
|
- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
|
|
- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
|
|
|
|
- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
|
|
|
|
- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
|
|
|
|
- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
|
|
|
|
- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
|
|
|
|
- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
|
|
- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
|
|
- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
|
|
- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
|
|
|
|
- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
|
|
|
|
- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
|
|
|
|
- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
|
|
|
|
- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
|
|
|
|
- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
|
|
- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
|
|
- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
|
|
- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
|
|
|
|
- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
|
|
|
|
- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
|
|
|
|
- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
|
|
|
|
- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
|
|
|
|
- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
|
|
|
|
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
|
|
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+ switch (pin_config) {
|
|
|
|
+ case 0:
|
|
|
|
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
|
|
|
|
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
|
|
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
|
|
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
|
|
+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
|
|
|
|
+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
|
|
|
|
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
|
|
+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
|
|
|
|
+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
|
|
|
|
+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
|
|
|
|
+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
|
|
|
|
+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
|
|
|
|
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
|
|
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
|
|
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
|
|
+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
|
|
|
|
+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
|
|
|
|
+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
|
|
|
|
+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
|
|
|
|
+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
|
|
|
|
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
|
|
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
|
|
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
|
|
+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
|
|
|
|
+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
|
|
|
|
+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
|
|
|
|
+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
|
|
|
|
+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
|
|
|
|
+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
|
|
|
|
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
|
|
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
|
|
|
+ break;
|
|
|
|
+ case 1:
|
|
|
|
+ select_peripheral(PE(0), PERIPH_B, 0); /* CC */
|
|
|
|
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
|
|
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
|
|
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
|
|
+ select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */
|
|
|
|
+ select_peripheral(PE(2), PERIPH_B, 0); /* MODE */
|
|
|
|
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
|
|
+ select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */
|
|
|
|
+ select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */
|
|
|
|
+ select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */
|
|
|
|
+ select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */
|
|
|
|
+ select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */
|
|
|
|
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
|
|
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
|
|
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
|
|
+ select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */
|
|
|
|
+ select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */
|
|
|
|
+ select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */
|
|
|
|
+ select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */
|
|
|
|
+ select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */
|
|
|
|
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
|
|
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
|
|
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
|
|
+ select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */
|
|
|
|
+ select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */
|
|
|
|
+ select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */
|
|
|
|
+ select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */
|
|
|
|
+ select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */
|
|
|
|
+ select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */
|
|
|
|
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
|
|
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ goto err_invalid_id;
|
|
|
|
+ }
|
|
|
|
|
|
|
|
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
|
|
|
|
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1351,9 +1650,39 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
.index = 6,
|
|
|
|
};
|
|
|
|
|
|
|
|
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
|
|
|
|
+ [idx] = { \
|
|
|
|
+ .name = nam, \
|
|
|
|
+ .index = idx, \
|
|
|
|
+ .fifo_size = maxpkt, \
|
|
|
|
+ .nr_banks = maxbk, \
|
|
|
|
+ .can_dma = dma, \
|
|
|
|
+ .can_isoc = isoc, \
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+static struct usba_ep_data at32_usba_ep[] __initdata = {
|
|
|
|
+ EP("ep0", 0, 64, 1, 0, 0),
|
|
|
|
+ EP("ep1", 1, 512, 2, 1, 1),
|
|
|
|
+ EP("ep2", 2, 512, 2, 1, 1),
|
|
|
|
+ EP("ep3-int", 3, 64, 3, 1, 0),
|
|
|
|
+ EP("ep4-int", 4, 64, 3, 1, 0),
|
|
|
|
+ EP("ep5", 5, 1024, 3, 1, 1),
|
|
|
|
+ EP("ep6", 6, 1024, 3, 1, 1),
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+#undef EP
|
|
|
|
+
|
|
|
|
struct platform_device *__init
|
|
|
|
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
|
|
|
|
{
|
|
|
|
+ /*
|
|
|
|
+ * pdata doesn't have room for any endpoints, so we need to
|
|
|
|
+ * append room for the ones we need right after it.
|
|
|
|
+ */
|
|
|
|
+ struct {
|
|
|
|
+ struct usba_platform_data pdata;
|
|
|
|
+ struct usba_ep_data ep[7];
|
|
|
|
+ } usba_data;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
|
|
|
|
if (id != 0)
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1367,13 +1696,20 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
ARRAY_SIZE(usba0_resource)))
|
|
|
|
goto out_free_pdev;
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
- if (data) {
|
|
|
|
- if (platform_device_add_data(pdev, data, sizeof(*data)))
|
|
|
|
- goto out_free_pdev;
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (data)
|
|
|
|
+ usba_data.pdata.vbus_pin = data->vbus_pin;
|
|
|
|
+ else
|
|
|
|
+ usba_data.pdata.vbus_pin = -EINVAL;
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
- if (data->vbus_pin != GPIO_PIN_NONE)
|
|
|
|
- at32_select_gpio(data->vbus_pin, 0);
|
|
|
|
- }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ data = &usba_data.pdata;
|
|
|
|
+ data->num_ep = ARRAY_SIZE(at32_usba_ep);
|
|
|
|
+ memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
|
|
|
|
+
|
|
|
|
+ if (platform_device_add_data(pdev, data, sizeof(usba_data)))
|
|
|
|
+ goto out_free_pdev;
|
|
|
|
+
|
|
|
|
+ if (data->vbus_pin >= 0)
|
|
|
|
+ at32_select_gpio(data->vbus_pin, 0);
|
|
|
|
|
|
|
|
usba0_pclk.dev = &pdev->dev;
|
|
|
|
usba0_hclk.dev = &pdev->dev;
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1526,6 +1862,58 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
|
|
+ * NAND Flash / SmartMedia
|
|
|
|
+ * -------------------------------------------------------------------- */
|
|
|
|
+static struct resource smc_cs3_resource[] __initdata = {
|
|
|
|
+ {
|
|
|
|
+ .start = 0x0c000000,
|
|
|
|
+ .end = 0x0fffffff,
|
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
|
+ }, {
|
|
|
|
+ .start = 0xfff03c00,
|
|
|
|
+ .end = 0xfff03fff,
|
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct platform_device *__init
|
|
|
|
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
|
|
|
|
+{
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+
|
|
|
|
+ if (id != 0 || !data)
|
|
|
|
+ return NULL;
|
|
|
|
+
|
|
|
|
+ pdev = platform_device_alloc("atmel_nand", id);
|
|
|
|
+ if (!pdev)
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ if (platform_device_add_resources(pdev, smc_cs3_resource,
|
|
|
|
+ ARRAY_SIZE(smc_cs3_resource)))
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ if (platform_device_add_data(pdev, data,
|
|
|
|
+ sizeof(struct atmel_nand_data)))
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
|
|
|
|
+ if (data->enable_pin)
|
|
|
|
+ at32_select_gpio(data->enable_pin,
|
|
|
|
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
|
|
|
+ if (data->rdy_pin)
|
|
|
|
+ at32_select_gpio(data->rdy_pin, 0);
|
|
|
|
+ if (data->det_pin)
|
|
|
|
+ at32_select_gpio(data->det_pin, 0);
|
|
|
|
+
|
|
|
|
+ platform_device_add(pdev);
|
|
|
|
+ return pdev;
|
|
|
|
+
|
|
|
|
+fail:
|
|
|
|
+ platform_device_put(pdev);
|
|
|
|
+ return NULL;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/* --------------------------------------------------------------------
|
|
|
|
* AC97C
|
|
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct resource atmel_ac97c0_resource[] __initdata = {
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1540,9 +1928,11 @@
|
|
|
|
.index = 10,
|
|
|
|
};
|
|
|
|
|
|
|
|
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
|
|
|
|
+struct platform_device *__init
|
|
|
|
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
+ struct ac97c_platform_data _data;
|
|
|
|
|
|
|
|
if (id != 0)
|
|
|
|
return NULL;
|
|
|
|
@@ -1553,19 +1943,37 @@
|
|
|
|
|
|
|
|
if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
|
|
|
|
ARRAY_SIZE(atmel_ac97c0_resource)))
|
|
|
|
- goto err_add_resources;
|
|
|
|
+ goto fail;
|
|
|
|
|
|
|
|
- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
|
|
|
|
- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
|
|
|
|
- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
|
|
|
|
- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
|
|
|
|
+ if (!data) {
|
|
|
|
+ data = &_data;
|
|
|
|
+ memset(data, 0, sizeof(struct ac97c_platform_data));
|
|
|
|
+ data->reset_pin = GPIO_PIN_NONE;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ data->dma_rx_periph_id = 3;
|
|
|
|
+ data->dma_tx_periph_id = 4;
|
|
|
|
+ data->dma_controller_id = 0;
|
|
|
|
+
|
|
|
|
+ if (platform_device_add_data(pdev, data,
|
|
|
|
+ sizeof(struct ac97c_platform_data)))
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
|
|
|
|
+ select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
|
|
|
|
+ select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
|
|
|
|
+ select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
|
|
|
|
+
|
|
|
|
+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
|
|
|
|
+ if (data->reset_pin != GPIO_PIN_NONE)
|
|
|
|
+ at32_select_gpio(data->reset_pin, 0);
|
|
|
|
|
|
|
|
atmel_ac97c0_pclk.dev = &pdev->dev;
|
|
|
|
|
|
|
|
platform_device_add(pdev);
|
|
|
|
return pdev;
|
|
|
|
|
|
|
|
-err_add_resources:
|
|
|
|
+fail:
|
|
|
|
platform_device_put(pdev);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
@@ -1683,6 +2091,7 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
&hmatrix_clk,
|
|
|
|
&ebi_clk,
|
|
|
|
&hramc_clk,
|
|
|
|
+ &sdramc_clk,
|
|
|
|
&smc0_pclk,
|
|
|
|
&smc0_mck,
|
|
|
|
&pdc_hclk,
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1694,7 +2103,10 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
&pio2_mck,
|
|
|
|
&pio3_mck,
|
|
|
|
&pio4_mck,
|
|
|
|
- &at32_systc0_pclk,
|
|
|
|
+ &at32_tcb0_t0_clk,
|
|
|
|
+ &at32_tcb1_t0_clk,
|
|
|
|
+ &atmel_psif0_pclk,
|
|
|
|
+ &atmel_psif1_pclk,
|
|
|
|
&atmel_usart0_usart,
|
|
|
|
&atmel_usart1_usart,
|
|
|
|
&atmel_usart2_usart,
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1730,16 +2142,7 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
};
|
|
|
|
unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
|
|
|
|
|
|
|
|
-void __init at32_portmux_init(void)
|
2008-02-07 22:08:19 +02:00
|
|
|
-{
|
2008-06-13 00:13:40 +03:00
|
|
|
- at32_init_pio(&pio0_device);
|
|
|
|
- at32_init_pio(&pio1_device);
|
|
|
|
- at32_init_pio(&pio2_device);
|
|
|
|
- at32_init_pio(&pio3_device);
|
|
|
|
- at32_init_pio(&pio4_device);
|
2008-02-07 22:08:19 +02:00
|
|
|
-}
|
|
|
|
-
|
2008-06-13 00:13:40 +03:00
|
|
|
-void __init at32_clock_init(void)
|
|
|
|
+void __init setup_platform(void)
|
|
|
|
{
|
|
|
|
u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
|
|
|
|
int i;
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1794,4 +2197,36 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
pm_writel(HSB_MASK, hsb_mask);
|
|
|
|
pm_writel(PBA_MASK, pba_mask);
|
|
|
|
pm_writel(PBB_MASK, pbb_mask);
|
|
|
|
+
|
|
|
|
+ /* Initialize the port muxes */
|
|
|
|
+ at32_init_pio(&pio0_device);
|
|
|
|
+ at32_init_pio(&pio1_device);
|
|
|
|
+ at32_init_pio(&pio2_device);
|
|
|
|
+ at32_init_pio(&pio3_device);
|
|
|
|
+ at32_init_pio(&pio4_device);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+struct gen_pool *sram_pool;
|
|
|
|
+
|
|
|
|
+static int __init sram_init(void)
|
|
|
|
+{
|
|
|
|
+ struct gen_pool *pool;
|
|
|
|
+
|
|
|
|
+ /* 1KiB granularity */
|
|
|
|
+ pool = gen_pool_create(10, -1);
|
|
|
|
+ if (!pool)
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
|
|
|
|
+ goto err_pool_add;
|
|
|
|
+
|
|
|
|
+ sram_pool = pool;
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+err_pool_add:
|
|
|
|
+ gen_pool_destroy(pool);
|
|
|
|
+fail:
|
|
|
|
+ pr_err("Failed to create SRAM pool\n");
|
|
|
|
+ return -ENOMEM;
|
|
|
|
}
|
|
|
|
+core_initcall(sram_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/cpufreq.c
|
|
|
|
+++ b/arch/avr32/mach-at32ap/cpufreq.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -108,5 +108,4 @@
|
|
|
|
{
|
|
|
|
return cpufreq_register_driver(&at32_driver);
|
|
|
|
}
|
2008-02-07 22:08:19 +02:00
|
|
|
-
|
2008-06-13 00:13:40 +03:00
|
|
|
-arch_initcall(at32_cpufreq_init);
|
|
|
|
+late_initcall(at32_cpufreq_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/mach-at32ap/gpio-dev.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,573 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
+/*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * GPIO /dev and configfs interface
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2006-2007 Atmel Corporation
|
2008-02-07 22:08:19 +02:00
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <linux/kernel.h>
|
|
|
|
+#include <linux/configfs.h>
|
|
|
|
+#include <linux/cdev.h>
|
|
|
|
+#include <linux/device.h>
|
|
|
|
+#include <linux/fs.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/poll.h>
|
|
|
|
+#include <linux/uaccess.h>
|
|
|
|
+#include <linux/wait.h>
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm/gpio.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <asm/arch/portmux.h>
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#define GPIO_DEV_MAX 8
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct class *gpio_dev_class;
|
|
|
|
+static dev_t gpio_devt;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct gpio_item {
|
|
|
|
+ spinlock_t lock;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ int enabled;
|
|
|
|
+ int initialized;
|
|
|
|
+ int port;
|
|
|
|
+ u32 pin_mask;
|
|
|
|
+ u32 oe_mask;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Pin state last time we read it (for blocking reads) */
|
|
|
|
+ u32 pin_state;
|
|
|
|
+ int changed;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ wait_queue_head_t change_wq;
|
|
|
|
+ struct fasync_struct *async_queue;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ int id;
|
|
|
|
+ struct class_device *gpio_dev;
|
|
|
|
+ struct cdev char_dev;
|
|
|
|
+ struct config_item item;
|
|
|
|
+};
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct gpio_attribute {
|
|
|
|
+ struct configfs_attribute attr;
|
|
|
|
+ ssize_t (*show)(struct gpio_item *, char *);
|
|
|
|
+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
|
|
|
|
+};
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
|
|
|
|
+{
|
|
|
|
+ struct gpio_item *gpio = dev_id;
|
|
|
|
+ u32 old_state, new_state;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ old_state = gpio->pin_state;
|
|
|
|
+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
|
|
|
|
+ gpio->pin_state = new_state;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (new_state != old_state) {
|
|
|
|
+ gpio->changed = 1;
|
|
|
|
+ wake_up_interruptible(&gpio->change_wq);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (gpio->async_queue)
|
|
|
|
+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return IRQ_HANDLED;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int gpio_dev_open(struct inode *inode, struct file *file)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = container_of(inode->i_cdev,
|
|
|
|
+ struct gpio_item,
|
|
|
|
+ char_dev);
|
|
|
|
+ unsigned int irq;
|
|
|
|
+ unsigned int i;
|
|
|
|
+ int ret;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ nonseekable_open(inode, file);
|
|
|
|
+ config_item_get(&gpio->item);
|
|
|
|
+ file->private_data = gpio;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
|
|
|
|
+ gpio->pin_mask);
|
|
|
|
+ gpio->changed = 1;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ for (i = 0; i < 32; i++) {
|
|
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
|
|
+ ret = request_irq(irq, gpio_dev_interrupt, 0,
|
|
|
|
+ "gpio-dev", gpio);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err_irq;
|
|
|
|
+ }
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+err_irq:
|
|
|
|
+ while (i--) {
|
|
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
|
|
+ free_irq(irq, gpio);
|
|
|
|
+ }
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ config_item_put(&gpio->item);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int gpio_dev_fasync(int fd, struct file *file, int mode)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = file->private_data;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return fasync_helper(fd, file, mode, &gpio->async_queue);
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int gpio_dev_release(struct inode *inode, struct file *file)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
|
|
+ unsigned int irq;
|
|
|
|
+ unsigned int i;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio_dev_fasync(-1, file, 0);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ for (i = 0; i < 32; i++) {
|
|
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
|
|
+ free_irq(irq, gpio);
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ config_item_put(&gpio->item);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
|
|
+ unsigned int mask = 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ poll_wait(file, &gpio->change_wq, wait);
|
|
|
|
+ if (gpio->changed)
|
|
|
|
+ mask |= POLLIN | POLLRDNORM;
|
|
|
|
+
|
|
|
|
+ return mask;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
|
|
|
|
+ size_t count, loff_t *offset)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
|
|
+ u32 value;
|
|
|
|
+
|
|
|
|
+ spin_lock_irq(&gpio->lock);
|
|
|
|
+ while (!gpio->changed) {
|
|
|
|
+ spin_unlock_irq(&gpio->lock);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (file->f_flags & O_NONBLOCK)
|
|
|
|
+ return -EAGAIN;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
|
|
|
|
+ return -ERESTARTSYS;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock_irq(&gpio->lock);
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio->changed = 0;
|
|
|
|
+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_unlock_irq(&gpio->lock);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ count = min(count, (size_t)4);
|
|
|
|
+ if (copy_to_user(buf, &value, count))
|
|
|
|
+ return -EFAULT;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return count;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
|
|
|
|
+ size_t count, loff_t *offset)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
|
|
+ u32 value = 0;
|
|
|
|
+ u32 mask = ~0UL;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ count = min(count, (size_t)4);
|
|
|
|
+ if (copy_from_user(&value, buf, count))
|
|
|
|
+ return -EFAULT;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Assuming big endian */
|
|
|
|
+ mask <<= (4 - count) * 8;
|
|
|
|
+ mask &= gpio->pin_mask;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ at32_gpio_set_value_multiple(gpio->port, value, mask);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return count;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct file_operations gpio_dev_fops = {
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ .llseek = no_llseek,
|
|
|
|
+ .open = gpio_dev_open,
|
|
|
|
+ .release = gpio_dev_release,
|
|
|
|
+ .fasync = gpio_dev_fasync,
|
|
|
|
+ .poll = gpio_dev_poll,
|
|
|
|
+ .read = gpio_dev_read,
|
|
|
|
+ .write = gpio_dev_write,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct gpio_item *to_gpio_item(struct config_item *item)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return item ? container_of(item, struct gpio_item, item) : NULL;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return sprintf(page, "%d\n", gpio->port);
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
|
|
|
|
+ const char *page, size_t count)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ unsigned long id;
|
|
|
|
+ char *p = (char *)page;
|
|
|
|
+ ssize_t ret = -EINVAL;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ id = simple_strtoul(p, &p, 0);
|
|
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
|
|
+ return -EINVAL;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Switching PIO is not allowed when live... */
|
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ if (!gpio->enabled) {
|
|
|
|
+ ret = -ENXIO;
|
|
|
|
+ if (at32_gpio_port_is_valid(id)) {
|
|
|
|
+ gpio->port = id;
|
|
|
|
+ ret = count;
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_unlock(&gpio->lock);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
|
|
|
|
+{
|
|
|
|
+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
|
|
|
|
+ const char *page, size_t count)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ u32 new_mask;
|
|
|
|
+ char *p = (char *)page;
|
|
|
|
+ ssize_t ret = -EINVAL;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ new_mask = simple_strtoul(p, &p, 0);
|
|
|
|
+ if (!p || (*p && (*p != '\n')))
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return -EINVAL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Can't update the pin mask while live. */
|
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ if (!gpio->enabled) {
|
|
|
|
+ gpio->oe_mask &= new_mask;
|
|
|
|
+ gpio->pin_mask = new_mask;
|
|
|
|
+ ret = count;
|
|
|
|
+ }
|
|
|
|
+ spin_unlock(&gpio->lock);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
|
|
|
|
+{
|
|
|
|
+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
|
|
|
|
+ const char *page, size_t count)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ u32 mask;
|
|
|
|
+ char *p = (char *)page;
|
|
|
|
+ ssize_t ret = -EINVAL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ mask = simple_strtoul(p, &p, 0);
|
|
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
|
|
+ return -EINVAL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ if (!gpio->enabled) {
|
|
|
|
+ gpio->oe_mask = mask & gpio->pin_mask;
|
|
|
|
+ ret = count;
|
|
|
|
+ }
|
|
|
|
+ spin_unlock(&gpio->lock);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
|
|
|
|
+{
|
|
|
|
+ return sprintf(page, "%d\n", gpio->enabled);
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
|
|
|
|
+ const char *page, size_t count)
|
|
|
|
+{
|
|
|
|
+ char *p = (char *)page;
|
|
|
|
+ int enabled;
|
|
|
|
+ int ret;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ enabled = simple_strtoul(p, &p, 0);
|
|
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
|
|
+ return -EINVAL;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* make it a boolean value */
|
|
|
|
+ enabled = !!enabled;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (gpio->enabled == enabled)
|
|
|
|
+ /* No change; do nothing. */
|
|
|
|
+ return count;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (!enabled) {
|
|
|
|
+ class_device_unregister(gpio->gpio_dev);
|
|
|
|
+ cdev_del(&gpio->char_dev);
|
|
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
|
|
+ gpio->initialized = 0;
|
|
|
|
+ } else {
|
|
|
|
+ if (gpio->port < 0 || !gpio->pin_mask)
|
|
|
|
+ return -ENODEV;
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Disallow any updates to gpio_id or pin_mask */
|
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ gpio->enabled = enabled;
|
|
|
|
+ spin_unlock(&gpio->lock);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (!enabled)
|
|
|
|
+ return count;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Now, try to allocate the pins */
|
|
|
|
+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err_alloc_pins;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio->initialized = 1;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
|
|
|
|
+ gpio->char_dev.owner = THIS_MODULE;
|
|
|
|
+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ goto err_cdev_add;
|
|
|
|
+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
|
|
|
|
+ MKDEV(MAJOR(gpio_devt), gpio->id),
|
|
|
|
+ NULL,
|
|
|
|
+ "gpio%d", gpio->id);
|
|
|
|
+ if (IS_ERR(gpio->gpio_dev)) {
|
|
|
|
+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
|
|
|
|
+ ret = PTR_ERR(gpio->gpio_dev);
|
|
|
|
+ goto err_class_dev;
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
|
|
|
|
+ gpio->id, gpio->port, gpio->pin_mask,
|
|
|
|
+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+err_class_dev:
|
|
|
|
+ cdev_del(&gpio->char_dev);
|
|
|
|
+err_cdev_add:
|
|
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
|
|
+ gpio->initialized = 0;
|
|
|
|
+err_alloc_pins:
|
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ gpio->enabled = 0;
|
|
|
|
+ spin_unlock(&gpio->lock);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct gpio_attribute gpio_item_attr_gpio_id = {
|
|
|
|
+ .attr = {
|
|
|
|
+ .ca_owner = THIS_MODULE,
|
|
|
|
+ .ca_name = "gpio_id",
|
|
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
|
|
+ },
|
|
|
|
+ .show = gpio_show_gpio_id,
|
|
|
|
+ .store = gpio_store_gpio_id,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct gpio_attribute gpio_item_attr_pin_mask = {
|
|
|
|
+ .attr = {
|
|
|
|
+ .ca_owner = THIS_MODULE,
|
|
|
|
+ .ca_name = "pin_mask",
|
|
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
|
|
+ },
|
|
|
|
+ .show = gpio_show_pin_mask,
|
|
|
|
+ .store = gpio_store_pin_mask,
|
2008-04-23 23:25:37 +03:00
|
|
|
+};
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct gpio_attribute gpio_item_attr_oe_mask = {
|
|
|
|
+ .attr = {
|
|
|
|
+ .ca_owner = THIS_MODULE,
|
|
|
|
+ .ca_name = "oe_mask",
|
|
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
|
|
+ },
|
|
|
|
+ .show = gpio_show_oe_mask,
|
|
|
|
+ .store = gpio_store_oe_mask,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct gpio_attribute gpio_item_attr_enabled = {
|
|
|
|
+ .attr = {
|
|
|
|
+ .ca_owner = THIS_MODULE,
|
|
|
|
+ .ca_name = "enabled",
|
|
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
|
|
+ },
|
|
|
|
+ .show = gpio_show_enabled,
|
|
|
|
+ .store = gpio_store_enabled,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct configfs_attribute *gpio_item_attrs[] = {
|
|
|
|
+ &gpio_item_attr_gpio_id.attr,
|
|
|
|
+ &gpio_item_attr_pin_mask.attr,
|
|
|
|
+ &gpio_item_attr_oe_mask.attr,
|
|
|
|
+ &gpio_item_attr_enabled.attr,
|
|
|
|
+ NULL,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_show_attr(struct config_item *item,
|
|
|
|
+ struct configfs_attribute *attr,
|
|
|
|
+ char *page)
|
|
|
|
+{
|
|
|
|
+ struct gpio_item *gpio_item = to_gpio_item(item);
|
|
|
|
+ struct gpio_attribute *gpio_attr
|
|
|
|
+ = container_of(attr, struct gpio_attribute, attr);
|
|
|
|
+ ssize_t ret = 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (gpio_attr->show)
|
|
|
|
+ ret = gpio_attr->show(gpio_item, page);
|
|
|
|
+ return ret;
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static ssize_t gpio_store_attr(struct config_item *item,
|
|
|
|
+ struct configfs_attribute *attr,
|
|
|
|
+ const char *page, size_t count)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct gpio_item *gpio_item = to_gpio_item(item);
|
|
|
|
+ struct gpio_attribute *gpio_attr
|
|
|
|
+ = container_of(attr, struct gpio_attribute, attr);
|
|
|
|
+ ssize_t ret = -EINVAL;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (gpio_attr->store)
|
|
|
|
+ ret = gpio_attr->store(gpio_item, page, count);
|
|
|
|
+ return ret;
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void gpio_release(struct config_item *item)
|
|
|
|
+{
|
|
|
|
+ kfree(to_gpio_item(item));
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct configfs_item_operations gpio_item_ops = {
|
|
|
|
+ .release = gpio_release,
|
|
|
|
+ .show_attribute = gpio_show_attr,
|
|
|
|
+ .store_attribute = gpio_store_attr,
|
2008-04-23 23:25:37 +03:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct config_item_type gpio_item_type = {
|
|
|
|
+ .ct_item_ops = &gpio_item_ops,
|
|
|
|
+ .ct_attrs = gpio_item_attrs,
|
|
|
|
+ .ct_owner = THIS_MODULE,
|
2008-04-23 23:25:37 +03:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct config_item *gpio_make_item(struct config_group *group,
|
|
|
|
+ const char *name)
|
2008-04-23 23:25:37 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ static int next_id;
|
|
|
|
+ struct gpio_item *gpio;
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (next_id >= GPIO_DEV_MAX)
|
2008-04-23 23:25:37 +03:00
|
|
|
+ return NULL;
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
|
|
|
|
+ if (!gpio)
|
2008-04-23 23:25:37 +03:00
|
|
|
+ return NULL;
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio->id = next_id++;
|
|
|
|
+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
|
|
|
|
+ spin_lock_init(&gpio->lock);
|
|
|
|
+ init_waitqueue_head(&gpio->change_wq);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return &gpio->item;
|
2008-04-23 23:25:37 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void gpio_drop_item(struct config_group *group,
|
|
|
|
+ struct config_item *item)
|
|
|
|
+{
|
|
|
|
+ struct gpio_item *gpio = to_gpio_item(item);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ spin_lock(&gpio->lock);
|
|
|
|
+ if (gpio->enabled) {
|
|
|
|
+ class_device_unregister(gpio->gpio_dev);
|
|
|
|
+ cdev_del(&gpio->char_dev);
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (gpio->initialized) {
|
|
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
|
|
+ gpio->initialized = 0;
|
|
|
|
+ gpio->enabled = 0;
|
|
|
|
+ }
|
|
|
|
+ spin_unlock(&gpio->lock);
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct configfs_group_operations gpio_group_ops = {
|
|
|
|
+ .make_item = gpio_make_item,
|
|
|
|
+ .drop_item = gpio_drop_item,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct config_item_type gpio_group_type = {
|
|
|
|
+ .ct_group_ops = &gpio_group_ops,
|
|
|
|
+ .ct_owner = THIS_MODULE,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+static struct configfs_subsystem gpio_subsys = {
|
|
|
|
+ .su_group = {
|
|
|
|
+ .cg_item = {
|
|
|
|
+ .ci_namebuf = "gpio",
|
|
|
|
+ .ci_type = &gpio_group_type,
|
|
|
|
+ },
|
|
|
|
+ },
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init gpio_dev_init(void)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ int err;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
|
|
|
|
+ if (IS_ERR(gpio_dev_class)) {
|
|
|
|
+ err = PTR_ERR(gpio_dev_class);
|
|
|
|
+ goto err_class_create;
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
|
|
|
|
+ if (err < 0)
|
|
|
|
+ goto err_alloc_chrdev;
|
|
|
|
+
|
|
|
|
+ /* Configfs initialization */
|
|
|
|
+ config_group_init(&gpio_subsys.su_group);
|
|
|
|
+ mutex_init(&gpio_subsys.su_mutex);
|
|
|
|
+ err = configfs_register_subsystem(&gpio_subsys);
|
|
|
|
+ if (err)
|
|
|
|
+ goto err_register_subsys;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+err_register_subsys:
|
|
|
|
+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
|
|
|
|
+err_alloc_chrdev:
|
|
|
|
+ class_destroy(gpio_dev_class);
|
|
|
|
+err_class_create:
|
|
|
|
+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
|
|
|
|
+ return err;
|
|
|
|
+}
|
|
|
|
+late_initcall(gpio_dev_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/hsmc.c
|
|
|
|
+++ b/arch/avr32/mach-at32ap/hsmc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -278,4 +278,4 @@
|
|
|
|
{
|
|
|
|
return platform_driver_register(&hsmc_driver);
|
|
|
|
}
|
|
|
|
-arch_initcall(hsmc_init);
|
|
|
|
+core_initcall(hsmc_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/intc.c
|
|
|
|
+++ b/arch/avr32/mach-at32ap/intc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,5 +1,5 @@
|
|
|
|
/*
|
|
|
|
- * Copyright (C) 2006 Atmel Corporation
|
|
|
|
+ * Copyright (C) 2006, 2008 Atmel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
@@ -12,15 +12,20 @@
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
+#include <linux/sysdev.h>
|
|
|
|
|
|
|
|
-#include <asm/intc.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
|
|
#include "intc.h"
|
|
|
|
|
|
|
|
struct intc {
|
|
|
|
- void __iomem *regs;
|
|
|
|
- struct irq_chip chip;
|
|
|
|
+ void __iomem *regs;
|
|
|
|
+ struct irq_chip chip;
|
|
|
|
+ struct sys_device sysdev;
|
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+ unsigned long suspend_ipr;
|
|
|
|
+ unsigned long saved_ipr[64];
|
|
|
|
+#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
extern struct platform_device at32_intc0_device;
|
|
|
|
@@ -137,6 +142,74 @@
|
|
|
|
panic("Interrupt controller initialization failed!\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+void intc_set_suspend_handler(unsigned long offset)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ intc0.suspend_ipr = offset;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int intc_suspend(struct sys_device *sdev, pm_message_t state)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct intc *intc = container_of(sdev, struct intc, sysdev);
|
|
|
|
+ int i;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (unlikely(!irqs_disabled())) {
|
|
|
|
+ pr_err("intc_suspend: called with interrupts enabled\n");
|
|
|
|
+ return -EINVAL;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (unlikely(!intc->suspend_ipr)) {
|
|
|
|
+ pr_err("intc_suspend: suspend_ipr not initialized\n");
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ for (i = 0; i < 64; i++) {
|
|
|
|
+ intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
|
|
|
|
+ intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int intc_resume(struct sys_device *sdev)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct intc *intc = container_of(sdev, struct intc, sysdev);
|
|
|
|
+ int i;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ WARN_ON(!irqs_disabled());
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ for (i = 0; i < 64; i++)
|
|
|
|
+ intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+#else
|
|
|
|
+#define intc_suspend NULL
|
|
|
|
+#define intc_resume NULL
|
|
|
|
+#endif
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct sysdev_class intc_class = {
|
|
|
|
+ .name = "intc",
|
|
|
|
+ .suspend = intc_suspend,
|
|
|
|
+ .resume = intc_resume,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init intc_init_sysdev(void)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ int ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ ret = sysdev_class_register(&intc_class);
|
|
|
|
+ if (ret)
|
|
|
|
+ return ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ intc0.sysdev.id = 0;
|
|
|
|
+ intc0.sysdev.cls = &intc_class;
|
|
|
|
+ ret = sysdev_register(&intc0.sysdev);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+device_initcall(intc_init_sysdev);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
unsigned long intc_get_pending(unsigned int group)
|
|
|
|
{
|
|
|
|
return intc_readl(&intc0, INTREQ0 + 4 * group);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/mach-at32ap/pdc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,48 @@
|
|
|
|
+/*
|
|
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/platform_device.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init pdc_probe(struct platform_device *pdev)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct clk *pclk, *hclk;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pclk = clk_get(&pdev->dev, "pclk");
|
|
|
|
+ if (IS_ERR(pclk)) {
|
|
|
|
+ dev_err(&pdev->dev, "no pclk defined\n");
|
|
|
|
+ return PTR_ERR(pclk);
|
|
|
|
+ }
|
|
|
|
+ hclk = clk_get(&pdev->dev, "hclk");
|
|
|
|
+ if (IS_ERR(hclk)) {
|
|
|
|
+ dev_err(&pdev->dev, "no hclk defined\n");
|
|
|
|
+ clk_put(pclk);
|
|
|
|
+ return PTR_ERR(hclk);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ clk_enable(pclk);
|
|
|
|
+ clk_enable(hclk);
|
|
|
|
+
|
|
|
|
+ dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
|
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct platform_driver pdc_driver = {
|
|
|
|
+ .probe = pdc_probe,
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "pdc",
|
|
|
|
+ },
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init pdc_init(void)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return platform_driver_register(&pdc_driver);
|
|
|
|
+}
|
|
|
|
+arch_initcall(pdc_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/pio.c
|
|
|
|
+++ b/arch/avr32/mach-at32ap/pio.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -157,6 +157,82 @@
|
|
|
|
dump_stack();
|
|
|
|
}
|
|
|
|
|
|
|
|
+#ifdef CONFIG_GPIO_DEV
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Gang allocators and accessors; used by the GPIO /dev driver */
|
|
|
|
+int at32_gpio_port_is_valid(unsigned int port)
|
|
|
|
+{
|
|
|
|
+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
|
|
|
|
+{
|
|
|
|
+ struct pio_device *pio;
|
|
|
|
+ u32 old, new;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pio = &pio_dev[port];
|
|
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Try to allocate the pins */
|
|
|
|
+ do {
|
|
|
|
+ old = pio->pinmux_mask;
|
|
|
|
+ if (old & pins)
|
|
|
|
+ return -EBUSY;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ new = old | pins;
|
|
|
|
+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* That went well, now configure the port */
|
|
|
|
+ pio_writel(pio, OER, oe_mask);
|
|
|
|
+ pio_writel(pio, PER, pins);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+void at32_deselect_pins(unsigned int port, u32 pins)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct pio_device *pio;
|
|
|
|
+ u32 old, new;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pio = &pio_dev[port];
|
|
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Return to a "safe" mux configuration */
|
|
|
|
+ pio_writel(pio, PUER, pins);
|
|
|
|
+ pio_writel(pio, ODR, pins);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Deallocate the pins */
|
|
|
|
+ do {
|
|
|
|
+ old = pio->pinmux_mask;
|
|
|
|
+ new = old & ~pins;
|
|
|
|
+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
|
|
|
|
+{
|
|
|
|
+ struct pio_device *pio;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pio = &pio_dev[port];
|
|
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return pio_readl(pio, PDSR) & pins;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct pio_device *pio;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pio = &pio_dev[port];
|
|
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* No atomic updates for now... */
|
|
|
|
+ pio_writel(pio, CODR, ~value & mask);
|
|
|
|
+ pio_writel(pio, SODR, value & mask);
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#endif /* CONFIG_GPIO_DEV */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/* GPIO API */
|
|
|
|
@@ -318,6 +394,8 @@
|
|
|
|
const char *label;
|
|
|
|
|
|
|
|
label = gpiochip_is_requested(chip, i);
|
|
|
|
+ if (!label && (imr & mask))
|
|
|
|
+ label = "[irq]";
|
|
|
|
if (!label)
|
|
|
|
continue;
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/pio.h
|
|
|
|
+++ b/arch/avr32/mach-at32ap/pio.h
|
|
|
|
@@ -57,7 +57,7 @@
|
|
|
|
|
|
|
|
/* Bitfields in IFDR */
|
|
|
|
|
|
|
|
-/* Bitfields in ISFR */
|
|
|
|
+/* Bitfields in IFSR */
|
|
|
|
|
|
|
|
/* Bitfields in SODR */
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,174 @@
|
|
|
|
+/*
|
|
|
|
+ * Low-level Power Management code.
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2008 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <asm/asm.h>
|
|
|
|
+#include <asm/asm-offsets.h>
|
|
|
|
+#include <asm/thread_info.h>
|
|
|
|
+#include <asm/arch/pm.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include "pm.h"
|
|
|
|
+#include "sdramc.h"
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
|
|
|
|
+#define PM_BASE -0x100000
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ .section .bss, "wa", @nobits
|
|
|
|
+ .global disable_idle_sleep
|
|
|
|
+ .type disable_idle_sleep, @object
|
|
|
|
+disable_idle_sleep:
|
|
|
|
+ .int 4
|
|
|
|
+ .size disable_idle_sleep, . - disable_idle_sleep
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Keep this close to the irq handlers */
|
|
|
|
+ .section .irq.text, "ax", @progbits
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * void cpu_enter_idle(void)
|
|
|
|
+ *
|
|
|
|
+ * Put the CPU into "idle" mode, in which it will consume
|
|
|
|
+ * significantly less power.
|
|
|
|
+ *
|
|
|
|
+ * If an interrupt comes along in the window between
|
|
|
|
+ * unmask_interrupts and the sleep instruction below, the
|
|
|
|
+ * interrupt code will adjust the return address so that we
|
|
|
|
+ * never execute the sleep instruction. This is required
|
|
|
|
+ * because the AP7000 doesn't unmask interrupts when entering
|
|
|
|
+ * sleep modes; later CPUs may not need this workaround.
|
|
|
|
+ */
|
|
|
|
+ .global cpu_enter_idle
|
|
|
|
+ .type cpu_enter_idle, @function
|
|
|
|
+cpu_enter_idle:
|
|
|
|
+ mask_interrupts
|
|
|
|
+ get_thread_info r8
|
|
|
|
+ ld.w r9, r8[TI_flags]
|
|
|
|
+ bld r9, TIF_NEED_RESCHED
|
|
|
|
+ brcs .Lret_from_sleep
|
|
|
|
+ sbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
|
|
+ st.w r8[TI_flags], r9
|
|
|
|
+ unmask_interrupts
|
|
|
|
+ sleep CPU_SLEEP_IDLE
|
|
|
|
+ .size cpu_idle_sleep, . - cpu_idle_sleep
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * Common return path for PM functions that don't run from
|
|
|
|
+ * SRAM.
|
|
|
|
+ */
|
|
|
|
+ .global cpu_idle_skip_sleep
|
|
|
|
+ .type cpu_idle_skip_sleep, @function
|
|
|
|
+cpu_idle_skip_sleep:
|
|
|
|
+ mask_interrupts
|
|
|
|
+ ld.w r9, r8[TI_flags]
|
|
|
|
+ cbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
|
|
+ st.w r8[TI_flags], r9
|
|
|
|
+.Lret_from_sleep:
|
|
|
|
+ unmask_interrupts
|
|
|
|
+ retal r12
|
|
|
|
+ .size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+ .section .init.text, "ax", @progbits
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ .global pm_exception
|
|
|
|
+ .type pm_exception, @function
|
|
|
|
+pm_exception:
|
|
|
|
+ /*
|
|
|
|
+ * Exceptions are masked when we switch to this handler, so
|
|
|
|
+ * we'll only get "unrecoverable" exceptions (offset 0.)
|
|
|
|
+ */
|
|
|
|
+ sub r12, pc, . - .Lpanic_msg
|
|
|
|
+ lddpc pc, .Lpanic_addr
|
|
|
|
+
|
|
|
|
+ .align 2
|
|
|
|
+.Lpanic_addr:
|
|
|
|
+ .long panic
|
|
|
|
+.Lpanic_msg:
|
|
|
|
+ .asciz "Unrecoverable exception during suspend\n"
|
|
|
|
+ .size pm_exception, . - pm_exception
|
|
|
|
+
|
|
|
|
+ .global pm_irq0
|
|
|
|
+ .type pm_irq0, @function
|
|
|
|
+pm_irq0:
|
|
|
|
+ /* Disable interrupts and return after the sleep instruction */
|
|
|
|
+ mfsr r9, SYSREG_RSR_INT0
|
|
|
|
+ mtsr SYSREG_RAR_INT0, r8
|
|
|
|
+ sbr r9, SYSREG_GM_OFFSET
|
|
|
|
+ mtsr SYSREG_RSR_INT0, r9
|
|
|
|
+ rete
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * void cpu_enter_standby(unsigned long sdramc_base)
|
|
|
|
+ *
|
|
|
|
+ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
|
|
|
|
+ * are suspended and interrupts are disabled. Interrupts
|
|
|
|
+ * marked as 'wakeup' event sources may still come along and
|
|
|
|
+ * get us out of here.
|
|
|
|
+ *
|
|
|
|
+ * The SDRAM will be put into self-refresh mode (which does
|
|
|
|
+ * not require a clock from the CPU), and the CPU will be put
|
|
|
|
+ * into "frozen" mode (HSB bus stopped). The SDRAM controller
|
|
|
|
+ * will automatically bring the SDRAM into normal mode on the
|
|
|
|
+ * first access, and the power manager will automatically
|
|
|
|
+ * start the HSB and CPU clocks upon a wakeup event.
|
|
|
|
+ *
|
|
|
|
+ * This code uses the same "skip sleep" technique as above.
|
|
|
|
+ * It is very important that we jump directly to
|
|
|
|
+ * cpu_after_sleep after the sleep instruction since that's
|
|
|
|
+ * where we'll end up if the interrupt handler decides that we
|
|
|
|
+ * need to skip the sleep instruction.
|
|
|
|
+ */
|
|
|
|
+ .global pm_standby
|
|
|
|
+ .type pm_standby, @function
|
|
|
|
+pm_standby:
|
|
|
|
+ /*
|
|
|
|
+ * interrupts are already masked at this point, and EVBA
|
|
|
|
+ * points to pm_exception above.
|
|
|
|
+ */
|
|
|
|
+ ld.w r10, r12[SDRAMC_LPR]
|
|
|
|
+ sub r8, pc, . - 1f /* return address for irq handler */
|
|
|
|
+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
|
|
|
|
+ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
|
|
|
|
+ sync 0 /* flush write buffer */
|
|
|
|
+ st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
|
|
|
|
+ ld.w r11, r12[SDRAMC_LPR]
|
|
|
|
+ unmask_interrupts
|
|
|
|
+ sleep CPU_SLEEP_FROZEN
|
|
|
|
+1: mask_interrupts
|
|
|
|
+ retal r12
|
|
|
|
+ .size pm_standby, . - pm_standby
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ .global pm_suspend_to_ram
|
|
|
|
+ .type pm_suspend_to_ram, @function
|
|
|
|
+pm_suspend_to_ram:
|
|
|
|
+ /*
|
|
|
|
+ * interrupts are already masked at this point, and EVBA
|
|
|
|
+ * points to pm_exception above.
|
|
|
|
+ */
|
|
|
|
+ mov r11, 0
|
|
|
|
+ cache r11[2], 8 /* clean all dcache lines */
|
|
|
|
+ sync 0 /* flush write buffer */
|
|
|
|
+ ld.w r10, r12[SDRAMC_LPR]
|
|
|
|
+ sub r8, pc, . - 1f /* return address for irq handler */
|
|
|
|
+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
|
|
|
|
+ bfins r10, r11, 0, 2 /* LPCB <- self refresh */
|
|
|
|
+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
|
|
|
|
+ ld.w r11, r12[SDRAMC_LPR]
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ unmask_interrupts
|
|
|
|
+ sleep CPU_SLEEP_STOP
|
|
|
|
+1: mask_interrupts
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ retal r12
|
|
|
|
+ .size pm_suspend_to_ram, . - pm_suspend_to_ram
|
|
|
|
+
|
|
|
|
+ .global pm_sram_end
|
|
|
|
+ .type pm_sram_end, @function
|
|
|
|
+pm_sram_end:
|
|
|
|
+ .size pm_sram_end, 0
|
|
|
|
+
|
|
|
|
+#endif /* CONFIG_PM */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/mach-at32ap/pm.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,245 @@
|
|
|
|
+/*
|
|
|
|
+ * AVR32 AP Power Management
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2008 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or
|
|
|
|
+ * modify it under the terms of the GNU General Public License
|
|
|
|
+ * version 2 as published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <linux/io.h>
|
|
|
|
+#include <linux/suspend.h>
|
|
|
|
+#include <linux/vmalloc.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm/cacheflush.h>
|
|
|
|
+#include <asm/sysreg.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm/arch/pm.h>
|
|
|
|
+#include <asm/arch/sram.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* FIXME: This is only valid for AP7000 */
|
|
|
|
+#define SDRAMC_BASE 0xfff03800
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include "sdramc.h"
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \
|
|
|
|
+ | SYSREG_BF(AP, 3) | SYSREG_BIT(G))
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static unsigned long pm_sram_start;
|
|
|
|
+static size_t pm_sram_size;
|
|
|
|
+static struct vm_struct *pm_sram_area;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
|
|
|
|
+static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Must be called with interrupts disabled. Exceptions will be masked
|
|
|
|
+ * on return (i.e. all exceptions will be "unrecoverable".)
|
|
|
|
+ */
|
|
|
|
+static void *avr32_pm_map_sram(void)
|
|
|
|
+{
|
|
|
|
+ unsigned long vaddr;
|
|
|
|
+ unsigned long page_addr;
|
|
|
|
+ u32 tlbehi;
|
|
|
|
+ u32 mmucr;
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ vaddr = (unsigned long)pm_sram_area->addr;
|
|
|
|
+ page_addr = pm_sram_start & PAGE_MASK;
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
+ /*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * Mask exceptions and grab the first TLB entry. We won't be
|
|
|
|
+ * needing it while sleeping.
|
2008-04-23 23:25:37 +03:00
|
|
|
+ */
|
2008-06-13 00:13:40 +03:00
|
|
|
+ asm volatile("ssrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ mmucr = sysreg_read(MMUCR);
|
|
|
|
+ tlbehi = sysreg_read(TLBEHI);
|
|
|
|
+ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
|
|
|
|
+ tlbehi |= vaddr & PAGE_MASK;
|
|
|
|
+ tlbehi |= SYSREG_BIT(TLBEHI_V);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
|
|
|
|
+ sysreg_write(TLBEHI, tlbehi);
|
|
|
|
+ __builtin_tlbw();
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return (void *)(vaddr + pm_sram_start - page_addr);
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Must be called with interrupts disabled. Exceptions will be
|
|
|
|
+ * unmasked on return.
|
|
|
|
+ */
|
|
|
|
+static void avr32_pm_unmap_sram(void)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ u32 mmucr;
|
|
|
|
+ u32 tlbehi;
|
|
|
|
+ u32 tlbarlo;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Going to update TLB entry at index 0 */
|
|
|
|
+ mmucr = sysreg_read(MMUCR);
|
|
|
|
+ tlbehi = sysreg_read(TLBEHI);
|
|
|
|
+ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Clear the "valid" bit */
|
|
|
|
+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
|
|
|
|
+ sysreg_write(TLBEHI, tlbehi);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Mark it as "not accessed" */
|
|
|
|
+ tlbarlo = sysreg_read(TLBARLO);
|
|
|
|
+ sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Update the TLB */
|
|
|
|
+ __builtin_tlbw();
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Unmask exceptions */
|
|
|
|
+ asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int avr32_pm_valid_state(suspend_state_t state)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ switch (state) {
|
|
|
|
+ case PM_SUSPEND_ON:
|
|
|
|
+ case PM_SUSPEND_STANDBY:
|
|
|
|
+ case PM_SUSPEND_MEM:
|
|
|
|
+ return 1;
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ default:
|
|
|
|
+ return 0;
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int avr32_pm_enter(suspend_state_t state)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ u32 lpr_saved;
|
|
|
|
+ u32 evba_saved;
|
|
|
|
+ void *sram;
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ switch (state) {
|
|
|
|
+ case PM_SUSPEND_STANDBY:
|
|
|
|
+ sram = avr32_pm_map_sram();
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Switch to in-sram exception handlers */
|
|
|
|
+ evba_saved = sysreg_read(EVBA);
|
|
|
|
+ sysreg_write(EVBA, (unsigned long)sram);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * Save the LPR register so that we can re-enable
|
|
|
|
+ * SDRAM Low Power mode on resume.
|
|
|
|
+ */
|
|
|
|
+ lpr_saved = sdramc_readl(LPR);
|
|
|
|
+ pr_debug("%s: Entering standby...\n", __func__);
|
|
|
|
+ avr32_pm_enter_standby(SDRAMC_BASE);
|
|
|
|
+ sdramc_writel(LPR, lpr_saved);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Switch back to regular exception handlers */
|
|
|
|
+ sysreg_write(EVBA, evba_saved);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ avr32_pm_unmap_sram();
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ case PM_SUSPEND_MEM:
|
|
|
|
+ sram = avr32_pm_map_sram();
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Switch to in-sram exception handlers */
|
|
|
|
+ evba_saved = sysreg_read(EVBA);
|
|
|
|
+ sysreg_write(EVBA, (unsigned long)sram);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * Save the LPR register so that we can re-enable
|
|
|
|
+ * SDRAM Low Power mode on resume.
|
|
|
|
+ */
|
|
|
|
+ lpr_saved = sdramc_readl(LPR);
|
|
|
|
+ pr_debug("%s: Entering suspend-to-ram...\n", __func__);
|
|
|
|
+ avr32_pm_enter_str(SDRAMC_BASE);
|
|
|
|
+ sdramc_writel(LPR, lpr_saved);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Switch back to regular exception handlers */
|
|
|
|
+ sysreg_write(EVBA, evba_saved);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ avr32_pm_unmap_sram();
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ case PM_SUSPEND_ON:
|
|
|
|
+ pr_debug("%s: Entering idle...\n", __func__);
|
|
|
|
+ cpu_enter_idle();
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ default:
|
|
|
|
+ pr_debug("%s: Invalid suspend state %d\n", __func__, state);
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pr_debug("%s: wakeup\n", __func__);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+out:
|
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct platform_suspend_ops avr32_pm_ops = {
|
|
|
|
+ .valid = avr32_pm_valid_state,
|
|
|
|
+ .enter = avr32_pm_enter,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static unsigned long avr32_pm_offset(void *symbol)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ extern u8 pm_exception[];
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return (unsigned long)symbol - (unsigned long)pm_exception;
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init avr32_pm_init(void)
|
|
|
|
+{
|
|
|
|
+ extern u8 pm_exception[];
|
|
|
|
+ extern u8 pm_irq0[];
|
|
|
|
+ extern u8 pm_standby[];
|
|
|
|
+ extern u8 pm_suspend_to_ram[];
|
|
|
|
+ extern u8 pm_sram_end[];
|
|
|
|
+ void *dst;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /*
|
|
|
|
+ * To keep things simple, we depend on not needing more than a
|
|
|
|
+ * single page.
|
|
|
|
+ */
|
|
|
|
+ pm_sram_size = avr32_pm_offset(pm_sram_end);
|
|
|
|
+ if (pm_sram_size > PAGE_SIZE)
|
|
|
|
+ goto err;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pm_sram_start = sram_alloc(pm_sram_size);
|
|
|
|
+ if (!pm_sram_start)
|
|
|
|
+ goto err_alloc_sram;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Grab a virtual area we can use later on. */
|
|
|
|
+ pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
|
|
|
|
+ if (!pm_sram_area)
|
|
|
|
+ goto err_vm_area;
|
|
|
|
+ pm_sram_area->phys_addr = pm_sram_start;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ local_irq_disable();
|
|
|
|
+ dst = avr32_pm_map_sram();
|
|
|
|
+ memcpy(dst, pm_exception, pm_sram_size);
|
|
|
|
+ flush_dcache_region(dst, pm_sram_size);
|
|
|
|
+ invalidate_icache_region(dst, pm_sram_size);
|
|
|
|
+ avr32_pm_unmap_sram();
|
|
|
|
+ local_irq_enable();
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
|
|
|
|
+ avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
|
|
|
|
+ intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ suspend_set_ops(&avr32_pm_ops);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ printk("AVR32 AP Power Management enabled\n");
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+err_vm_area:
|
|
|
|
+ sram_free(pm_sram_start, pm_sram_size);
|
|
|
|
+err_alloc_sram:
|
|
|
|
+err:
|
|
|
|
+ pr_err("AVR32 Power Management initialization failed\n");
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+}
|
|
|
|
+arch_initcall(avr32_pm_init);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/arch/avr32/mach-at32ap/sdramc.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,76 @@
|
|
|
|
+/*
|
|
|
|
+ * Register definitions for the AT32AP SDRAM Controller
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2008 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or
|
|
|
|
+ * modify it under the terms of the GNU General Public License
|
|
|
|
+ * version 2 as published by the Free Software Foundation.
|
|
|
|
+ */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Register offsets */
|
|
|
|
+#define SDRAMC_MR 0x0000
|
|
|
|
+#define SDRAMC_TR 0x0004
|
|
|
|
+#define SDRAMC_CR 0x0008
|
|
|
|
+#define SDRAMC_HSR 0x000c
|
|
|
|
+#define SDRAMC_LPR 0x0010
|
|
|
|
+#define SDRAMC_IER 0x0014
|
|
|
|
+#define SDRAMC_IDR 0x0018
|
|
|
|
+#define SDRAMC_IMR 0x001c
|
|
|
|
+#define SDRAMC_ISR 0x0020
|
|
|
|
+#define SDRAMC_MDR 0x0024
|
|
|
|
+
|
|
|
|
+/* MR - Mode Register */
|
|
|
|
+#define SDRAMC_MR_MODE_NORMAL ( 0 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_NOP ( 1 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_BANKS_PRECHARGE ( 2 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_LOAD_MODE ( 3 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_AUTO_REFRESH ( 4 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_EXT_LOAD_MODE ( 5 << 0)
|
|
|
|
+#define SDRAMC_MR_MODE_POWER_DOWN ( 6 << 0)
|
|
|
|
+
|
|
|
|
+/* CR - Configuration Register */
|
|
|
|
+#define SDRAMC_CR_NC_8_BITS ( 0 << 0)
|
|
|
|
+#define SDRAMC_CR_NC_9_BITS ( 1 << 0)
|
|
|
|
+#define SDRAMC_CR_NC_10_BITS ( 2 << 0)
|
|
|
|
+#define SDRAMC_CR_NC_11_BITS ( 3 << 0)
|
|
|
|
+#define SDRAMC_CR_NR_11_BITS ( 0 << 2)
|
|
|
|
+#define SDRAMC_CR_NR_12_BITS ( 1 << 2)
|
|
|
|
+#define SDRAMC_CR_NR_13_BITS ( 2 << 2)
|
|
|
|
+#define SDRAMC_CR_NB_2_BANKS ( 0 << 4)
|
|
|
|
+#define SDRAMC_CR_NB_4_BANKS ( 1 << 4)
|
|
|
|
+#define SDRAMC_CR_CAS(x) ((x) << 5)
|
|
|
|
+#define SDRAMC_CR_DBW_32_BITS ( 0 << 7)
|
|
|
|
+#define SDRAMC_CR_DBW_16_BITS ( 1 << 7)
|
|
|
|
+#define SDRAMC_CR_TWR(x) ((x) << 8)
|
|
|
|
+#define SDRAMC_CR_TRC(x) ((x) << 12)
|
|
|
|
+#define SDRAMC_CR_TRP(x) ((x) << 16)
|
|
|
|
+#define SDRAMC_CR_TRCD(x) ((x) << 20)
|
|
|
|
+#define SDRAMC_CR_TRAS(x) ((x) << 24)
|
|
|
|
+#define SDRAMC_CR_TXSR(x) ((x) << 28)
|
|
|
|
+
|
|
|
|
+/* HSR - High Speed Register */
|
|
|
|
+#define SDRAMC_HSR_DA ( 1 << 0)
|
|
|
|
+
|
|
|
|
+/* LPR - Low Power Register */
|
|
|
|
+#define SDRAMC_LPR_LPCB_INHIBIT ( 0 << 0)
|
|
|
|
+#define SDRAMC_LPR_LPCB_SELF_RFR ( 1 << 0)
|
|
|
|
+#define SDRAMC_LPR_LPCB_PDOWN ( 2 << 0)
|
|
|
|
+#define SDRAMC_LPR_LPCB_DEEP_PDOWN ( 3 << 0)
|
|
|
|
+#define SDRAMC_LPR_PASR(x) ((x) << 4)
|
|
|
|
+#define SDRAMC_LPR_TCSR(x) ((x) << 8)
|
|
|
|
+#define SDRAMC_LPR_DS(x) ((x) << 10)
|
|
|
|
+#define SDRAMC_LPR_TIMEOUT(x) ((x) << 12)
|
|
|
|
+
|
|
|
|
+/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
|
|
|
|
+#define SDRAMC_ISR_RES ( 1 << 0)
|
|
|
|
+
|
|
|
|
+/* MDR - Memory Device Register */
|
|
|
|
+#define SDRAMC_MDR_MD_SDRAM ( 0 << 0)
|
|
|
|
+#define SDRAMC_MDR_MD_LOW_PWR_SDRAM ( 1 << 0)
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Register access macros */
|
|
|
|
+#define sdramc_readl(reg) \
|
|
|
|
+ __raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
|
|
|
|
+#define sdramc_writel(reg, value) \
|
|
|
|
+ __raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mach-at32ap/time-tc.c
|
|
|
|
+++ /dev/null
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,218 +0,0 @@
|
|
|
|
-/*
|
|
|
|
- * Copyright (C) 2004-2007 Atmel Corporation
|
|
|
|
- *
|
|
|
|
- * Based on MIPS implementation arch/mips/kernel/time.c
|
|
|
|
- * Copyright 2001 MontaVista Software Inc.
|
|
|
|
- *
|
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
|
|
- * published by the Free Software Foundation.
|
|
|
|
- */
|
2008-02-07 22:08:19 +02:00
|
|
|
-
|
2008-06-13 00:13:40 +03:00
|
|
|
-#include <linux/clk.h>
|
|
|
|
-#include <linux/clocksource.h>
|
|
|
|
-#include <linux/time.h>
|
|
|
|
-#include <linux/module.h>
|
|
|
|
-#include <linux/interrupt.h>
|
|
|
|
-#include <linux/irq.h>
|
|
|
|
-#include <linux/kernel_stat.h>
|
|
|
|
-#include <linux/errno.h>
|
|
|
|
-#include <linux/init.h>
|
|
|
|
-#include <linux/profile.h>
|
|
|
|
-#include <linux/sysdev.h>
|
|
|
|
-#include <linux/err.h>
|
|
|
|
-
|
|
|
|
-#include <asm/div64.h>
|
|
|
|
-#include <asm/sysreg.h>
|
|
|
|
-#include <asm/io.h>
|
|
|
|
-#include <asm/sections.h>
|
|
|
|
-
|
|
|
|
-#include <asm/arch/time.h>
|
|
|
|
-
|
|
|
|
-/* how many counter cycles in a jiffy? */
|
|
|
|
-static u32 cycles_per_jiffy;
|
|
|
|
-
|
|
|
|
-/* the count value for the next timer interrupt */
|
|
|
|
-static u32 expirelo;
|
|
|
|
-
|
|
|
|
-/* the I/O registers of the TC module */
|
|
|
|
-static void __iomem *ioregs;
|
|
|
|
-
|
|
|
|
-cycle_t read_cycle_count(void)
|
|
|
|
-{
|
|
|
|
- return (cycle_t)timer_read(ioregs, 0, CV);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-struct clocksource clocksource_avr32 = {
|
|
|
|
- .name = "avr32",
|
|
|
|
- .rating = 342,
|
|
|
|
- .read = read_cycle_count,
|
|
|
|
- .mask = CLOCKSOURCE_MASK(16),
|
|
|
|
- .shift = 16,
|
|
|
|
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-static void avr32_timer_ack(void)
|
|
|
|
-{
|
|
|
|
- u16 count = expirelo;
|
|
|
|
-
|
|
|
|
- /* Ack this timer interrupt and set the next one, use a u16
|
|
|
|
- * variable so it will wrap around correctly */
|
|
|
|
- count += cycles_per_jiffy;
|
|
|
|
- expirelo = count;
|
|
|
|
- timer_write(ioregs, 0, RC, expirelo);
|
|
|
|
-
|
|
|
|
- /* Check to see if we have missed any timer interrupts */
|
|
|
|
- count = timer_read(ioregs, 0, CV);
|
|
|
|
- if ((count - expirelo) < 0x7fff) {
|
|
|
|
- expirelo = count + cycles_per_jiffy;
|
|
|
|
- timer_write(ioregs, 0, RC, expirelo);
|
|
|
|
- }
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-u32 avr32_hpt_read(void)
|
|
|
|
-{
|
|
|
|
- return timer_read(ioregs, 0, CV);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
|
|
|
|
-{
|
|
|
|
- unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
|
|
|
|
- unsigned int divs[] = { 4, 8, 16, 32 };
|
|
|
|
- int divs_size = ARRAY_SIZE(divs);
|
|
|
|
- int i = 0;
|
|
|
|
- unsigned long count_hz;
|
|
|
|
- unsigned long shift;
|
|
|
|
- unsigned long mult;
|
|
|
|
- int clock_div = -1;
|
|
|
|
- u64 tmp;
|
|
|
|
-
|
|
|
|
- shift = clocksource_avr32.shift;
|
|
|
|
-
|
|
|
|
- do {
|
|
|
|
- count_hz = clk_get_rate(pclk) / divs[i];
|
|
|
|
- mult = clocksource_hz2mult(count_hz, shift);
|
|
|
|
- clocksource_avr32.mult = mult;
|
|
|
|
-
|
|
|
|
- tmp = TICK_NSEC;
|
|
|
|
- tmp <<= shift;
|
|
|
|
- tmp += mult / 2;
|
|
|
|
- do_div(tmp, mult);
|
|
|
|
-
|
|
|
|
- cycles_per_jiffy = tmp;
|
|
|
|
- } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
|
|
|
|
-
|
|
|
|
- clock_div = i + 1;
|
|
|
|
-
|
|
|
|
- if (clock_div > divs_size) {
|
|
|
|
- pr_debug("timer: could not calculate clock divider\n");
|
|
|
|
- return -EFAULT;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- /* Set the clock divider */
|
|
|
|
- timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
|
|
|
|
-
|
|
|
|
- return 0;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-int avr32_hpt_init(unsigned int count)
|
|
|
|
-{
|
|
|
|
- struct resource *regs;
|
|
|
|
- struct clk *pclk;
|
|
|
|
- int irq = -1;
|
|
|
|
- int ret = 0;
|
|
|
|
-
|
|
|
|
- ret = -ENXIO;
|
|
|
|
-
|
|
|
|
- irq = platform_get_irq(&at32_systc0_device, 0);
|
|
|
|
- if (irq < 0) {
|
|
|
|
- pr_debug("timer: could not get irq\n");
|
|
|
|
- goto out_error;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- pclk = clk_get(&at32_systc0_device.dev, "pclk");
|
|
|
|
- if (IS_ERR(pclk)) {
|
|
|
|
- pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
|
|
|
|
- goto out_error;
|
|
|
|
- }
|
|
|
|
- clk_enable(pclk);
|
|
|
|
-
|
|
|
|
- regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
|
|
|
|
- if (!regs) {
|
|
|
|
- pr_debug("timer: could not get resource\n");
|
|
|
|
- goto out_error_clk;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- ioregs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
- if (!ioregs) {
|
|
|
|
- pr_debug("timer: could not get ioregs\n");
|
|
|
|
- goto out_error_clk;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- ret = avr32_timer_calc_div_and_set_jiffies(pclk);
|
|
|
|
- if (ret)
|
|
|
|
- goto out_error_io;
|
|
|
|
-
|
|
|
|
- ret = setup_irq(irq, &timer_irqaction);
|
|
|
|
- if (ret) {
|
|
|
|
- pr_debug("timer: could not request irq %d: %d\n",
|
|
|
|
- irq, ret);
|
|
|
|
- goto out_error_io;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
|
|
|
|
- * cycles_per_jiffy;
|
|
|
|
-
|
|
|
|
- /* Enable clock and interrupts on RC compare */
|
|
|
|
- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
|
|
|
|
- timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
|
|
|
|
- /* Set cycles to first interrupt */
|
|
|
|
- timer_write(ioregs, 0, RC, expirelo);
|
|
|
|
-
|
|
|
|
- printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
|
|
|
|
- ioregs, irq);
|
|
|
|
-
|
|
|
|
- return 0;
|
|
|
|
-
|
|
|
|
-out_error_io:
|
|
|
|
- iounmap(ioregs);
|
|
|
|
-out_error_clk:
|
|
|
|
- clk_put(pclk);
|
|
|
|
-out_error:
|
|
|
|
- return ret;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-int avr32_hpt_start(void)
|
|
|
|
-{
|
|
|
|
- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
|
|
|
|
- return 0;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-irqreturn_t timer_interrupt(int irq, void *dev_id)
|
|
|
|
-{
|
|
|
|
- unsigned int sr = timer_read(ioregs, 0, SR);
|
|
|
|
-
|
|
|
|
- if (sr & TIMER_BIT(SR_CPCS)) {
|
|
|
|
- /* ack timer interrupt and try to set next interrupt */
|
|
|
|
- avr32_timer_ack();
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * Call the generic timer interrupt handler
|
|
|
|
- */
|
|
|
|
- write_seqlock(&xtime_lock);
|
|
|
|
- do_timer(1);
|
|
|
|
- write_sequnlock(&xtime_lock);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * In UP mode, we call local_timer_interrupt() to do profiling
|
|
|
|
- * and process accounting.
|
|
|
|
- *
|
|
|
|
- * SMP is not supported yet.
|
|
|
|
- */
|
|
|
|
- local_timer_interrupt(irq, dev_id);
|
|
|
|
-
|
|
|
|
- return IRQ_HANDLED;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- return IRQ_NONE;
|
|
|
|
-}
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/mm/init.c
|
|
|
|
+++ b/arch/avr32/mm/init.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -11,6 +11,7 @@
|
|
|
|
#include <linux/swap.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mmzone.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <linux/pagemap.h>
|
|
|
|
#include <linux/nodemask.h>
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -23,20 +24,20 @@
|
|
|
|
#include <asm/setup.h>
|
|
|
|
#include <asm/sections.h>
|
|
|
|
|
|
|
|
+#define __page_aligned __attribute__((section(".data.page_aligned")))
|
|
|
|
+
|
|
|
|
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
|
|
|
|
|
|
|
|
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
|
|
|
|
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
struct page *empty_zero_page;
|
|
|
|
+EXPORT_SYMBOL(empty_zero_page);
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
/*
|
2008-07-05 17:49:07 +03:00
|
|
|
* Cache of MMU context last used.
|
|
|
|
*/
|
|
|
|
unsigned long mmu_context_cache = NO_CONTEXT;
|
|
|
|
|
|
|
|
-#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
|
|
|
|
-#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
|
|
|
|
-
|
|
|
|
void show_mem(void)
|
|
|
|
{
|
|
|
|
int total = 0, reserved = 0, cached = 0;
|
|
|
|
@@ -109,19 +110,9 @@
|
|
|
|
zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
|
|
|
|
PAGE_SIZE);
|
|
|
|
|
|
|
|
- {
|
|
|
|
- pgd_t *pg_dir;
|
|
|
|
- int i;
|
|
|
|
-
|
|
|
|
- pg_dir = swapper_pg_dir;
|
|
|
|
- sysreg_write(PTBR, (unsigned long)pg_dir);
|
|
|
|
-
|
|
|
|
- for (i = 0; i < PTRS_PER_PGD; i++)
|
|
|
|
- pgd_val(pg_dir[i]) = 0;
|
|
|
|
-
|
|
|
|
- enable_mmu();
|
|
|
|
- printk ("CPU: Paging enabled\n");
|
|
|
|
- }
|
|
|
|
+ sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
|
|
|
|
+ enable_mmu();
|
|
|
|
+ printk ("CPU: Paging enabled\n");
|
|
|
|
|
|
|
|
for_each_online_node(nid) {
|
|
|
|
pg_data_t *pgdat = NODE_DATA(nid);
|
|
|
|
--- a/arch/avr32/mm/tlb.c
|
|
|
|
+++ b/arch/avr32/mm/tlb.c
|
|
|
|
@@ -11,21 +11,21 @@
|
|
|
|
|
|
|
|
#include <asm/mmu_context.h>
|
|
|
|
|
|
|
|
-#define _TLBEHI_I 0x100
|
|
|
|
+/* TODO: Get the correct number from the CONFIG1 system register */
|
|
|
|
+#define NR_TLB_ENTRIES 32
|
|
|
|
|
|
|
|
-void show_dtlb_entry(unsigned int index)
|
|
|
|
+static void show_dtlb_entry(unsigned int index)
|
|
|
|
{
|
|
|
|
- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
|
|
|
|
+ u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
mmucr_save = sysreg_read(MMUCR);
|
|
|
|
tlbehi_save = sysreg_read(TLBEHI);
|
|
|
|
- mmucr = mmucr_save & 0x13;
|
|
|
|
- mmucr |= index << 14;
|
|
|
|
+ mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
|
|
|
|
- asm volatile("tlbr" : : : "memory");
|
|
|
|
+ __builtin_tlbr();
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
tlbehi = sysreg_read(TLBEHI);
|
|
|
|
@@ -33,15 +33,17 @@
|
|
|
|
|
|
|
|
printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
|
|
|
|
index,
|
|
|
|
- (tlbehi & 0x200)?'1':'0',
|
|
|
|
- (tlbelo & 0x100)?'1':'0',
|
|
|
|
- (tlbehi & 0xff),
|
|
|
|
- (tlbehi >> 12), (tlbelo >> 12),
|
|
|
|
- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
|
|
|
|
- (tlbelo & 0x200)?'1':'0',
|
|
|
|
- (tlbelo & 0x080)?'1':'0',
|
|
|
|
- (tlbelo & 0x001)?'1':'0',
|
|
|
|
- (tlbelo & 0x002)?'1':'0');
|
|
|
|
+ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(ASID, tlbehi),
|
|
|
|
+ SYSREG_BFEXT(VPN, tlbehi) >> 2,
|
|
|
|
+ SYSREG_BFEXT(PFN, tlbelo) >> 2,
|
|
|
|
+ SYSREG_BFEXT(AP, tlbelo),
|
|
|
|
+ SYSREG_BFEXT(SZ, tlbelo),
|
|
|
|
+ SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
|
|
|
|
+ SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
|
|
|
|
+ SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
|
|
|
|
+ SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
|
|
|
|
|
|
|
|
sysreg_write(MMUCR, mmucr_save);
|
|
|
|
sysreg_write(TLBEHI, tlbehi_save);
|
|
|
|
@@ -54,29 +56,33 @@
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
printk("ID V G ASID VPN PFN AP SZ C B W D\n");
|
|
|
|
- for (i = 0; i < 32; i++)
|
|
|
|
+ for (i = 0; i < NR_TLB_ENTRIES; i++)
|
|
|
|
show_dtlb_entry(i);
|
|
|
|
}
|
|
|
|
|
|
|
|
-static unsigned long last_mmucr;
|
|
|
|
-
|
|
|
|
-static inline void set_replacement_pointer(unsigned shift)
|
|
|
|
+static void update_dtlb(unsigned long address, pte_t pte)
|
|
|
|
{
|
|
|
|
- unsigned long mmucr, mmucr_save;
|
|
|
|
+ u32 tlbehi;
|
|
|
|
+ u32 mmucr;
|
|
|
|
|
|
|
|
- mmucr = mmucr_save = sysreg_read(MMUCR);
|
|
|
|
+ /*
|
|
|
|
+ * We're not changing the ASID here, so no need to flush the
|
|
|
|
+ * pipeline.
|
|
|
|
+ */
|
|
|
|
+ tlbehi = sysreg_read(TLBEHI);
|
|
|
|
+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
|
|
|
|
+ tlbehi |= address & MMU_VPN_MASK;
|
|
|
|
+ tlbehi |= SYSREG_BIT(TLBEHI_V);
|
|
|
|
+ sysreg_write(TLBEHI, tlbehi);
|
|
|
|
|
|
|
|
/* Does this mapping already exist? */
|
|
|
|
- __asm__ __volatile__(
|
|
|
|
- " tlbs\n"
|
|
|
|
- " mfsr %0, %1"
|
|
|
|
- : "=r"(mmucr)
|
|
|
|
- : "i"(SYSREG_MMUCR));
|
|
|
|
+ __builtin_tlbs();
|
|
|
|
+ mmucr = sysreg_read(MMUCR);
|
|
|
|
|
|
|
|
if (mmucr & SYSREG_BIT(MMUCR_N)) {
|
|
|
|
/* Not found -- pick a not-recently-accessed entry */
|
|
|
|
- unsigned long rp;
|
|
|
|
- unsigned long tlbar = sysreg_read(TLBARLO);
|
|
|
|
+ unsigned int rp;
|
|
|
|
+ u32 tlbar = sysreg_read(TLBARLO);
|
|
|
|
|
|
|
|
rp = 32 - fls(tlbar);
|
|
|
|
if (rp == 32) {
|
|
|
|
@@ -84,30 +90,14 @@
|
|
|
|
sysreg_write(TLBARLO, -1L);
|
|
|
|
}
|
|
|
|
|
|
|
|
- mmucr &= 0x13;
|
|
|
|
- mmucr |= (rp << shift);
|
|
|
|
-
|
|
|
|
+ mmucr = SYSREG_BFINS(DRP, rp, mmucr);
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
}
|
|
|
|
|
|
|
|
- last_mmucr = mmucr;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
|
|
|
|
-{
|
|
|
|
- unsigned long vpn;
|
|
|
|
-
|
|
|
|
- vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
|
|
|
|
- sysreg_write(TLBEHI, vpn);
|
|
|
|
- cpu_sync_pipeline();
|
|
|
|
-
|
|
|
|
- set_replacement_pointer(14);
|
|
|
|
-
|
|
|
|
sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
|
|
|
|
|
|
|
|
/* Let's go */
|
|
|
|
- asm volatile("nop\n\ttlbw" : : : "memory");
|
|
|
|
- cpu_sync_pipeline();
|
|
|
|
+ __builtin_tlbw();
|
|
|
|
}
|
|
|
|
|
|
|
|
void update_mmu_cache(struct vm_area_struct *vma,
|
|
|
|
@@ -120,39 +110,40 @@
|
|
|
|
return;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
- update_dtlb(address, pte, get_asid());
|
|
|
|
+ update_dtlb(address, pte);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
-void __flush_tlb_page(unsigned long asid, unsigned long page)
|
|
|
|
+static void __flush_tlb_page(unsigned long asid, unsigned long page)
|
|
|
|
{
|
|
|
|
- unsigned long mmucr, tlbehi;
|
|
|
|
+ u32 mmucr, tlbehi;
|
|
|
|
|
|
|
|
- page |= asid;
|
|
|
|
- sysreg_write(TLBEHI, page);
|
|
|
|
- cpu_sync_pipeline();
|
|
|
|
- asm volatile("tlbs");
|
|
|
|
+ /*
|
|
|
|
+ * Caller is responsible for masking out non-PFN bits in page
|
|
|
|
+ * and changing the current ASID if necessary. This means that
|
|
|
|
+ * we don't need to flush the pipeline after writing TLBEHI.
|
|
|
|
+ */
|
|
|
|
+ tlbehi = page | asid;
|
|
|
|
+ sysreg_write(TLBEHI, tlbehi);
|
|
|
|
+
|
|
|
|
+ __builtin_tlbs();
|
|
|
|
mmucr = sysreg_read(MMUCR);
|
|
|
|
|
|
|
|
if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
|
|
|
|
- unsigned long tlbarlo;
|
|
|
|
- unsigned long entry;
|
|
|
|
+ unsigned int entry;
|
|
|
|
+ u32 tlbarlo;
|
|
|
|
|
|
|
|
/* Clear the "valid" bit */
|
|
|
|
- tlbehi = sysreg_read(TLBEHI);
|
|
|
|
- tlbehi &= ~_TLBEHI_VALID;
|
|
|
|
sysreg_write(TLBEHI, tlbehi);
|
|
|
|
- cpu_sync_pipeline();
|
|
|
|
|
|
|
|
/* mark the entry as "not accessed" */
|
|
|
|
- entry = (mmucr >> 14) & 0x3f;
|
|
|
|
+ entry = SYSREG_BFEXT(DRP, mmucr);
|
|
|
|
tlbarlo = sysreg_read(TLBARLO);
|
|
|
|
- tlbarlo |= (0x80000000 >> entry);
|
|
|
|
+ tlbarlo |= (0x80000000UL >> entry);
|
|
|
|
sysreg_write(TLBARLO, tlbarlo);
|
|
|
|
|
|
|
|
/* update the entry with valid bit clear */
|
|
|
|
- asm volatile("tlbw");
|
|
|
|
- cpu_sync_pipeline();
|
|
|
|
+ __builtin_tlbw();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
@@ -190,17 +181,22 @@
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
|
|
|
|
+
|
|
|
|
if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
|
|
|
|
mm->context = NO_CONTEXT;
|
|
|
|
if (mm == current->mm)
|
|
|
|
activate_context(mm);
|
|
|
|
} else {
|
|
|
|
- unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
- unsigned long saved_asid = MMU_NO_ASID;
|
|
|
|
+ unsigned long asid;
|
|
|
|
+ unsigned long saved_asid;
|
|
|
|
+
|
|
|
|
+ asid = mm->context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
+ saved_asid = MMU_NO_ASID;
|
|
|
|
|
|
|
|
start &= PAGE_MASK;
|
|
|
|
end += (PAGE_SIZE - 1);
|
|
|
|
end &= PAGE_MASK;
|
|
|
|
+
|
|
|
|
if (mm != current->mm) {
|
|
|
|
saved_asid = get_asid();
|
|
|
|
set_asid(asid);
|
|
|
|
@@ -218,33 +214,34 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
|
|
|
|
- * skip the ASID stuff and just use the Global bit...
|
|
|
|
+ * This function depends on the pages to be flushed having the G
|
|
|
|
+ * (global) bit set in their pte. This is true for all
|
|
|
|
+ * PAGE_KERNEL(_RO) pages.
|
2008-06-13 00:13:40 +03:00
|
|
|
*/
|
2008-07-05 17:49:07 +03:00
|
|
|
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int size;
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
- local_irq_save(flags);
|
|
|
|
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
|
|
|
|
if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
|
|
|
|
flush_tlb_all();
|
|
|
|
} else {
|
|
|
|
- unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
- unsigned long saved_asid = get_asid();
|
|
|
|
+ unsigned long asid;
|
|
|
|
+
|
|
|
|
+ local_irq_save(flags);
|
|
|
|
+ asid = get_asid();
|
|
|
|
|
|
|
|
start &= PAGE_MASK;
|
|
|
|
end += (PAGE_SIZE - 1);
|
|
|
|
end &= PAGE_MASK;
|
|
|
|
- set_asid(asid);
|
|
|
|
+
|
|
|
|
while (start < end) {
|
|
|
|
__flush_tlb_page(asid, start);
|
|
|
|
start += PAGE_SIZE;
|
|
|
|
}
|
|
|
|
- set_asid(saved_asid);
|
|
|
|
+ local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
- local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
void flush_tlb_mm(struct mm_struct *mm)
|
|
|
|
@@ -280,7 +277,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
{
|
2008-07-05 17:49:07 +03:00
|
|
|
static unsigned long tlb_index;
|
|
|
|
|
|
|
|
- if (*pos >= 32)
|
|
|
|
+ if (*pos >= NR_TLB_ENTRIES)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
tlb_index = 0;
|
|
|
|
@@ -291,7 +288,7 @@
|
|
|
|
{
|
|
|
|
unsigned long *index = v;
|
|
|
|
|
|
|
|
- if (*index >= 31)
|
|
|
|
+ if (*index >= NR_TLB_ENTRIES - 1)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
++*pos;
|
|
|
|
@@ -313,16 +310,16 @@
|
|
|
|
if (*index == 0)
|
|
|
|
seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
|
|
|
|
|
|
|
|
- BUG_ON(*index >= 32);
|
|
|
|
+ BUG_ON(*index >= NR_TLB_ENTRIES);
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
mmucr_save = sysreg_read(MMUCR);
|
|
|
|
tlbehi_save = sysreg_read(TLBEHI);
|
|
|
|
- mmucr = mmucr_save & 0x13;
|
|
|
|
- mmucr |= *index << 14;
|
|
|
|
+ mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
|
|
|
|
- asm volatile("tlbr" : : : "memory");
|
|
|
|
+ /* TLBR might change the ASID */
|
|
|
|
+ __builtin_tlbr();
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
tlbehi = sysreg_read(TLBEHI);
|
|
|
|
@@ -334,16 +331,18 @@
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
|
|
|
|
- *index,
|
|
|
|
- (tlbehi & 0x200)?'1':'0',
|
|
|
|
- (tlbelo & 0x100)?'1':'0',
|
|
|
|
- (tlbehi & 0xff),
|
|
|
|
- (tlbehi >> 12), (tlbelo >> 12),
|
|
|
|
- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
|
|
|
|
- (tlbelo & 0x200)?'1':'0',
|
|
|
|
- (tlbelo & 0x080)?'1':'0',
|
|
|
|
- (tlbelo & 0x001)?'1':'0',
|
|
|
|
- (tlbelo & 0x002)?'1':'0');
|
|
|
|
+ *index,
|
|
|
|
+ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(ASID, tlbehi),
|
|
|
|
+ SYSREG_BFEXT(VPN, tlbehi) >> 2,
|
|
|
|
+ SYSREG_BFEXT(PFN, tlbelo) >> 2,
|
|
|
|
+ SYSREG_BFEXT(AP, tlbelo),
|
|
|
|
+ SYSREG_BFEXT(SZ, tlbelo),
|
|
|
|
+ SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
|
|
|
|
+ SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/arch/avr32/oprofile/op_model_avr32.c
|
|
|
|
+++ b/arch/avr32/oprofile/op_model_avr32.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -16,7 +16,6 @@
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
|
|
|
-#include <asm/intc.h>
|
|
|
|
#include <asm/sysreg.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/char/Kconfig
|
|
|
|
+++ b/drivers/char/Kconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -706,7 +706,7 @@
|
|
|
|
|
|
|
|
config RTC
|
|
|
|
tristate "Enhanced Real Time Clock Support"
|
|
|
|
- depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
|
|
|
|
+ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !AVR32
|
|
|
|
---help---
|
|
|
|
If you say Y here and create a character special file /dev/rtc with
|
|
|
|
major number 10 and minor number 135 using mknod ("man mknod"), you
|
|
|
|
@@ -776,7 +776,7 @@
|
|
|
|
|
|
|
|
config GEN_RTC
|
|
|
|
tristate "Generic /dev/rtc emulation"
|
|
|
|
- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
|
|
|
|
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
|
|
|
|
---help---
|
|
|
|
If you say Y here and create a character special file /dev/rtc with
|
|
|
|
major number 10 and minor number 135 using mknod ("man mknod"), you
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/char/keyboard.c
|
|
|
|
+++ b/drivers/char/keyboard.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1033,7 +1033,8 @@
|
|
|
|
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
|
|
|
|
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
|
|
|
|
defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
|
|
|
|
- (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
|
|
|
|
+ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
|
|
|
|
+ defined(CONFIG_AVR32)
|
|
|
|
|
|
|
|
#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
|
|
|
|
((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/clocksource/Makefile
|
|
|
|
+++ b/drivers/clocksource/Makefile
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,3 +1,4 @@
|
|
|
|
+obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
|
|
|
|
obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
|
|
|
|
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
|
|
|
|
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/clocksource/tcb_clksrc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,302 @@
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/clocksource.h>
|
|
|
|
+#include <linux/clockchips.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/irq.h>
|
|
|
|
+
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/ioport.h>
|
|
|
|
+#include <linux/io.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+#include <linux/atmel_tc.h>
|
|
|
|
+
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * We're configured to use a specific TC block, one that's not hooked
|
|
|
|
+ * up to external hardware, to provide a time solution:
|
2008-02-07 22:08:19 +02:00
|
|
|
+ *
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * - Two channels combine to create a free-running 32 bit counter
|
|
|
|
+ * with a base rate of 5+ MHz, packaged as a clocksource (with
|
|
|
|
+ * resolution better than 200 nsec).
|
2008-02-07 22:08:19 +02:00
|
|
|
+ *
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * - The third channel may be used to provide a 16-bit clockevent
|
|
|
|
+ * source, used in either periodic or oneshot mode. This runs
|
|
|
|
+ * at 32 KiHZ, and can handle delays of up to two seconds.
|
|
|
|
+ *
|
|
|
|
+ * A boot clocksource and clockevent source are also currently needed,
|
|
|
|
+ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
|
|
|
|
+ * this code can be used when init_timers() is called, well before most
|
|
|
|
+ * devices are set up. (Some low end AT91 parts, which can run uClinux,
|
|
|
|
+ * have only the timers in one TC block... they currently don't support
|
|
|
|
+ * the tclib code, because of that initialization issue.)
|
|
|
|
+ *
|
|
|
|
+ * REVISIT behavior during system suspend states... we should disable
|
|
|
|
+ * all clocks and save the power. Easily done for clockevent devices,
|
|
|
|
+ * but clocksources won't necessarily get the needed notifications.
|
|
|
|
+ * For deeper system sleep states, this will be mandatory...
|
2008-02-07 22:08:19 +02:00
|
|
|
+ */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void __iomem *tcaddr;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static cycle_t tc_get_cycles(void)
|
|
|
|
+{
|
|
|
|
+ unsigned long flags;
|
|
|
|
+ u32 lower, upper;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ raw_local_irq_save(flags);
|
|
|
|
+ do {
|
|
|
|
+ upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
|
|
|
|
+ lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
|
|
|
|
+ } while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ raw_local_irq_restore(flags);
|
|
|
|
+ return (upper << 16) | lower;
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct clocksource clksrc = {
|
|
|
|
+ .name = "tcb_clksrc",
|
|
|
|
+ .rating = 200,
|
|
|
|
+ .read = tc_get_cycles,
|
|
|
|
+ .mask = CLOCKSOURCE_MASK(32),
|
|
|
|
+ .shift = 18,
|
|
|
|
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
|
|
|
|
+
|
|
|
|
+struct tc_clkevt_device {
|
|
|
|
+ struct clock_event_device clkevt;
|
|
|
|
+ struct clk *clk;
|
|
|
|
+ void __iomem *regs;
|
2008-02-07 22:08:19 +02:00
|
|
|
+};
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return container_of(clkevt, struct tc_clkevt_device, clkevt);
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
|
|
|
|
+ * because using one of the divided clocks would usually mean the
|
|
|
|
+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
|
|
|
|
+ *
|
|
|
|
+ * A divided clock could be good for high resolution timers, since
|
|
|
|
+ * 30.5 usec resolution can seem "low".
|
|
|
|
+ */
|
|
|
|
+static u32 timer_clock;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
|
|
|
|
+{
|
|
|
|
+ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
|
|
|
|
+ void __iomem *regs = tcd->regs;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
|
|
|
|
+ || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
|
|
|
|
+ __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
|
|
|
|
+ __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
|
|
|
|
+ clk_disable(tcd->clk);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ switch (m) {
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* By not making the gentime core emulate periodic mode on top
|
|
|
|
+ * of oneshot, we get lower overhead and improved accuracy.
|
|
|
|
+ */
|
|
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
|
|
+ clk_enable(tcd->clk);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* slow clock, count up to RC, then irq and restart */
|
|
|
|
+ __raw_writel(timer_clock
|
|
|
|
+ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
|
|
|
|
+ regs + ATMEL_TC_REG(2, CMR));
|
|
|
|
+ __raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Enable clock and interrupts on RC compare */
|
|
|
|
+ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* go go gadget! */
|
|
|
|
+ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
|
|
|
|
+ regs + ATMEL_TC_REG(2, CCR));
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
|
|
+ clk_enable(tcd->clk);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* slow clock, count up to RC, then irq and stop */
|
|
|
|
+ __raw_writel(timer_clock | ATMEL_TC_CPCSTOP
|
|
|
|
+ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
|
|
|
|
+ regs + ATMEL_TC_REG(2, CMR));
|
|
|
|
+ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* set_next_event() configures and starts the timer */
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ default:
|
|
|
|
+ break;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ __raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* go go gadget! */
|
|
|
|
+ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
|
|
|
|
+ tcaddr + ATMEL_TC_REG(2, CCR));
|
|
|
|
+ return 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct tc_clkevt_device clkevt = {
|
|
|
|
+ .clkevt = {
|
|
|
|
+ .name = "tc_clkevt",
|
|
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC
|
|
|
|
+ | CLOCK_EVT_FEAT_ONESHOT,
|
|
|
|
+ .shift = 32,
|
|
|
|
+ /* Should be lower than at91rm9200's system timer */
|
|
|
|
+ .rating = 125,
|
|
|
|
+ .cpumask = CPU_MASK_CPU0,
|
|
|
|
+ .set_next_event = tc_next_event,
|
|
|
|
+ .set_mode = tc_mode,
|
|
|
|
+ },
|
|
|
|
+};
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static irqreturn_t ch2_irq(int irq, void *handle)
|
|
|
|
+{
|
|
|
|
+ struct tc_clkevt_device *dev = handle;
|
|
|
|
+ unsigned int sr;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
|
|
|
|
+ if (sr & ATMEL_TC_CPCS) {
|
|
|
|
+ dev->clkevt.event_handler(&dev->clkevt);
|
|
|
|
+ return IRQ_HANDLED;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return IRQ_NONE;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct irqaction tc_irqaction = {
|
|
|
|
+ .name = "tc_clkevt",
|
|
|
|
+ .flags = IRQF_TIMER | IRQF_DISABLED,
|
|
|
|
+ .handler = ch2_irq,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct clk *t2_clk = tc->clk[2];
|
|
|
|
+ int irq = tc->irq[2];
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ clkevt.regs = tc->regs;
|
|
|
|
+ clkevt.clk = t2_clk;
|
|
|
|
+ tc_irqaction.dev_id = &clkevt;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ timer_clock = clk32k_divisor_idx;
|
|
|
|
+
|
|
|
|
+ clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
|
|
|
|
+ clkevt.clkevt.max_delta_ns
|
|
|
|
+ = clockevent_delta2ns(0xffff, &clkevt.clkevt);
|
|
|
|
+ clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
|
|
|
|
+
|
|
|
|
+ setup_irq(irq, &tc_irqaction);
|
|
|
|
+
|
|
|
|
+ clockevents_register_device(&clkevt.clkevt);
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
|
|
|
|
+
|
|
|
|
+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* NOTHING */
|
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#endif
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __init tcb_clksrc_init(void)
|
|
|
|
+{
|
|
|
|
+ static char bootinfo[] __initdata
|
|
|
|
+ = KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+ struct atmel_tc *tc;
|
|
|
|
+ struct clk *t0_clk;
|
|
|
|
+ u32 rate, divided_rate = 0;
|
|
|
|
+ int best_divisor_idx = -1;
|
|
|
|
+ int clk32k_divisor_idx = -1;
|
|
|
|
+ int i;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
|
|
|
|
+ if (!tc) {
|
|
|
|
+ pr_debug("can't alloc TC for clocksource\n");
|
|
|
|
+ return -ENODEV;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ tcaddr = tc->regs;
|
|
|
|
+ pdev = tc->pdev;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ t0_clk = tc->clk[0];
|
|
|
|
+ clk_enable(t0_clk);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* How fast will we be counting? Pick something over 5 MHz. */
|
|
|
|
+ rate = (u32) clk_get_rate(t0_clk);
|
|
|
|
+ for (i = 0; i < 5; i++) {
|
|
|
|
+ unsigned divisor = atmel_tc_divisors[i];
|
|
|
|
+ unsigned tmp;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* remember 32 KiHz clock for later */
|
|
|
|
+ if (!divisor) {
|
|
|
|
+ clk32k_divisor_idx = i;
|
|
|
|
+ continue;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ tmp = rate / divisor;
|
|
|
|
+ pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
|
|
|
|
+ if (best_divisor_idx > 0) {
|
|
|
|
+ if (tmp < 5 * 1000 * 1000)
|
|
|
|
+ continue;
|
|
|
|
+ }
|
|
|
|
+ divided_rate = tmp;
|
|
|
|
+ best_divisor_idx = i;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
|
|
|
|
+ divided_rate / 1000000,
|
|
|
|
+ ((divided_rate + 500000) % 1000000) / 1000);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* tclib will give us three clocks no matter what the
|
|
|
|
+ * underlying platform supports.
|
|
|
|
+ */
|
|
|
|
+ clk_enable(tc->clk[1]);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */
|
|
|
|
+ __raw_writel(best_divisor_idx /* likely divide-by-8 */
|
|
|
|
+ | ATMEL_TC_WAVE
|
|
|
|
+ | ATMEL_TC_WAVESEL_UP /* free-run */
|
|
|
|
+ | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */
|
|
|
|
+ | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */
|
|
|
|
+ tcaddr + ATMEL_TC_REG(0, CMR));
|
|
|
|
+ __raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
|
|
|
|
+ __raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
|
|
|
|
+ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */
|
|
|
|
+ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* channel 1: waveform mode, input TIOA0 */
|
|
|
|
+ __raw_writel(ATMEL_TC_XC1 /* input: TIOA0 */
|
|
|
|
+ | ATMEL_TC_WAVE
|
|
|
|
+ | ATMEL_TC_WAVESEL_UP, /* free-run */
|
|
|
|
+ tcaddr + ATMEL_TC_REG(1, CMR));
|
|
|
|
+ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */
|
|
|
|
+ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* chain channel 0 to channel 1, then reset all the timers */
|
|
|
|
+ __raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
|
|
|
|
+ __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* and away we go! */
|
|
|
|
+ clocksource_register(&clksrc);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* channel 2: periodic and oneshot timer support */
|
|
|
|
+ setup_clkevents(tc, clk32k_divisor_idx);
|
|
|
|
+
|
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2008-06-13 00:13:40 +03:00
|
|
|
+arch_initcall(tcb_clksrc_init);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/i2c/busses/Kconfig
|
|
|
|
+++ b/drivers/i2c/busses/Kconfig
|
|
|
|
@@ -88,6 +88,14 @@
|
|
|
|
to support combined I2C messages. Use the i2c-gpio driver
|
|
|
|
unless your system can cope with those limitations.
|
|
|
|
|
|
|
|
+config I2C_ATMELTWI
|
|
|
|
+ tristate "Atmel Two-Wire Interface (TWI)"
|
|
|
|
+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
|
|
|
|
+ help
|
|
|
|
+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
|
|
|
|
+ AT91-based device and want to use its built-in TWI
|
|
|
|
+ functionality.
|
|
|
|
+
|
|
|
|
config I2C_AU1550
|
|
|
|
tristate "Au1550/Au1200 SMBus interface"
|
|
|
|
depends on SOC_AU1550 || SOC_AU1200
|
|
|
|
--- a/drivers/i2c/busses/Makefile
|
|
|
|
+++ b/drivers/i2c/busses/Makefile
|
|
|
|
@@ -52,6 +52,7 @@
|
|
|
|
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
|
|
|
|
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
|
|
|
|
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
|
|
|
|
+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
|
|
|
|
|
|
|
|
ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
|
|
|
|
EXTRA_CFLAGS += -DDEBUG
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/i2c/busses/i2c-atmeltwi.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,436 @@
|
|
|
|
+/*
|
|
|
|
+ * i2c Support for Atmel's Two-Wire Interface (TWI)
|
|
|
|
+ *
|
|
|
|
+ * Based on the work of Copyright (C) 2004 Rick Bronson
|
|
|
|
+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
|
|
|
|
+ * Ported to AVR32 and heavily modified by Espen Krangnes
|
|
|
|
+ * <ekrangnes at atmel.com>
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * Borrowed heavily from the original work by:
|
|
|
|
+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
|
|
|
|
+ *
|
|
|
|
+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
|
|
|
|
+ * bugs removed, interrupt routine markedly rewritten
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
|
|
+ * (at your option) any later version.
|
|
|
|
+ */
|
|
|
|
+#undef VERBOSE_DEBUG
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/slab.h>
|
|
|
|
+#include <linux/i2c.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+#include <linux/completion.h>
|
|
|
|
+#include <linux/io.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include "i2c-atmeltwi.h"
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static unsigned int baudrate = 100 * 1000;
|
|
|
|
+module_param(baudrate, uint, S_IRUGO);
|
|
|
|
+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+struct atmel_twi {
|
|
|
|
+ void __iomem *regs;
|
|
|
|
+ struct i2c_adapter adapter;
|
|
|
|
+ struct clk *pclk;
|
|
|
|
+ struct completion comp;
|
|
|
|
+ u32 mask;
|
|
|
|
+ u8 *buf;
|
|
|
|
+ u16 len;
|
|
|
|
+ u16 acks_left;
|
|
|
|
+ int status;
|
|
|
|
+ unsigned int irq;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+};
|
|
|
|
+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * (Re)Initialize the TWI hardware registers.
|
|
|
|
+ */
|
|
|
|
+static int twi_hwinit(struct atmel_twi *twi)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ unsigned long cdiv, ckdiv = 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* REVISIT: wait till SCL is high before resetting; otherwise,
|
|
|
|
+ * some versions will wedge forever.
|
|
|
|
+ */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ twi_writel(twi, IDR, ~0UL);
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
|
|
|
|
+ twi_readl(twi, SR);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ while (cdiv > 255) {
|
|
|
|
+ ckdiv++;
|
|
|
|
+ cdiv = cdiv >> 1;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* REVISIT: there are various errata to consider re CDIV and CHDIV
|
|
|
|
+ * here, at least on at91 parts.
|
|
|
|
+ */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (ckdiv > 7)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ else
|
|
|
|
+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
|
|
|
|
+ | TWI_BF(CHDIV, cdiv)
|
|
|
|
+ | TWI_BF(CLDIV, cdiv));
|
|
|
|
+ return 0;
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Waits for the i2c status register to set the specified bitmask
|
|
|
|
+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
|
|
|
|
+ * limit, but I2C has no limit at all.
|
|
|
|
+ */
|
|
|
|
+static int twi_complete(struct atmel_twi *twi, u32 mask)
|
2008-02-07 22:08:19 +02:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ int timeout = msecs_to_jiffies(100);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ mask |= TWI_BIT(TXCOMP);
|
|
|
|
+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
|
|
|
|
+ init_completion(&twi->comp);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ twi_writel(twi, IER, mask);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
|
|
|
|
+ /* RESET TWI interface */
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(SWRST));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Reinitialize TWI */
|
|
|
|
+ twi_hwinit(twi);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return -ETIMEDOUT;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Generic i2c master transfer entrypoint.
|
|
|
|
+ */
|
|
|
|
+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
|
|
|
|
+{
|
|
|
|
+ struct atmel_twi *twi = to_atmel_twi(adap);
|
|
|
|
+ int i;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ twi->status = 0;
|
|
|
|
+ for (i = 0; i < num; i++, pmsg++) {
|
|
|
|
+ twi->len = pmsg->len;
|
|
|
|
+ twi->buf = pmsg->buf;
|
|
|
|
+ twi->acks_left = pmsg->len;
|
|
|
|
+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
|
|
|
|
+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
|
|
|
|
+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dev_dbg(&adap->dev,
|
|
|
|
+ "#%d: %s %d byte%s %s dev 0x%02x\n",
|
|
|
|
+ i,
|
|
|
|
+ pmsg->flags & I2C_M_RD ? "reading" : "writing",
|
|
|
|
+ pmsg->len,
|
|
|
|
+ pmsg->len > 1 ? "s" : "",
|
|
|
|
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* enable */
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(MSEN));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (pmsg->flags & I2C_M_RD) {
|
|
|
|
+ /* cleanup after previous RX overruns */
|
|
|
|
+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
|
|
|
|
+ twi_readl(twi, RHR);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (twi->len == 1)
|
|
|
|
+ twi_writel(twi, CR,
|
|
|
|
+ TWI_BIT(START) | TWI_BIT(STOP));
|
|
|
|
+ else
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(START));
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
|
|
|
|
+ dev_dbg(&adap->dev, "RX[%d] timeout. "
|
|
|
|
+ "Stopped with %d bytes left\n",
|
|
|
|
+ i, twi->acks_left);
|
|
|
|
+ return -ETIMEDOUT;
|
|
|
|
+ }
|
|
|
|
+ } else {
|
|
|
|
+ twi_writel(twi, THR, twi->buf[0]);
|
|
|
|
+ twi->acks_left--;
|
|
|
|
+ /* REVISIT: some chips don't start automagically:
|
|
|
|
+ * twi_writel(twi, CR, TWI_BIT(START));
|
|
|
|
+ */
|
|
|
|
+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
|
|
|
|
+ dev_dbg(&adap->dev, "TX[%d] timeout. "
|
|
|
|
+ "Stopped with %d bytes left\n",
|
|
|
|
+ i, twi->acks_left);
|
|
|
|
+ return -ETIMEDOUT;
|
|
|
|
+ }
|
|
|
|
+ /* REVISIT: an erratum workaround may be needed here;
|
|
|
|
+ * see sam9261 "STOP not generated" (START either).
|
|
|
|
+ */
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Disable TWI interface */
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(MSDIS));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (twi->status)
|
|
|
|
+ return twi->status;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* WARNING: This driver lies about properly supporting
|
|
|
|
+ * repeated start, or it would *ALWAYS* return here. It
|
|
|
|
+ * has issued a STOP. Continuing is a false claim -- that
|
|
|
|
+ * a second (or third, etc.) message is part of the same
|
|
|
|
+ * "combined" (no STOPs between parts) message.
|
|
|
|
+ */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ } /* end cur msg */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return i;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static irqreturn_t twi_interrupt(int irq, void *dev_id)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct atmel_twi *twi = dev_id;
|
|
|
|
+ int status = twi_readl(twi, SR);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* Save state for later debug prints */
|
|
|
|
+ int old_status = status;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (twi->mask & status) {
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ status &= twi->mask;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (status & TWI_BIT(RXRDY)) {
|
|
|
|
+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
|
|
|
|
+ /* Note weakness in fault reporting model:
|
|
|
|
+ * we can't say "the first N of these data
|
|
|
|
+ * bytes are valid".
|
|
|
|
+ */
|
|
|
|
+ dev_err(&twi->adapter.dev,
|
|
|
|
+ "OVERRUN RX! %04x, lost %d\n",
|
|
|
|
+ old_status, twi->acks_left);
|
|
|
|
+ twi->acks_left = 0;
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
|
|
|
+ twi->status = -EOVERFLOW;
|
|
|
|
+ } else if (twi->acks_left > 0) {
|
|
|
|
+ twi->buf[twi->len - twi->acks_left] =
|
|
|
|
+ twi_readl(twi, RHR);
|
|
|
|
+ twi->acks_left--;
|
|
|
|
+ }
|
|
|
|
+ if (status & TWI_BIT(TXCOMP))
|
|
|
|
+ goto done;
|
|
|
|
+ if (twi->acks_left == 1)
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
|
|
|
|
+ goto done;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ } else if (status & TWI_BIT(TXRDY)) {
|
|
|
|
+ if (twi->acks_left > 0) {
|
|
|
|
+ twi_writel(twi, THR,
|
|
|
|
+ twi->buf[twi->len - twi->acks_left]);
|
|
|
|
+ twi->acks_left--;
|
|
|
|
+ } else
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ if (twi->acks_left == 0)
|
|
|
|
+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* enabling this message helps trigger overruns/underruns ... */
|
|
|
|
+ dev_vdbg(&twi->adapter.dev,
|
|
|
|
+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
|
|
|
|
+ old_status,
|
|
|
|
+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
|
|
|
|
+ twi->acks_left);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return IRQ_HANDLED;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+done:
|
|
|
|
+ /* Note weak fault reporting model: we can't report how many
|
|
|
|
+ * bytes we sent before the NAK, or let upper layers choose
|
|
|
|
+ * whether to continue. The I2C stack doesn't allow that...
|
|
|
|
+ */
|
|
|
|
+ if (status & TWI_BIT(NACK)) {
|
|
|
|
+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
|
|
|
|
+ twi->acks_left);
|
|
|
|
+ twi->status = -EPIPE;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ /* TX underrun morphs automagically into a premature STOP;
|
|
|
|
+ * we'll probably observe UVRE even when it's not documented.
|
|
|
|
+ */
|
|
|
|
+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
|
|
|
|
+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
|
|
|
|
+ old_status, twi->acks_left);
|
|
|
|
+ twi->status = -ENOSR;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ twi_writel(twi, IDR, ~0UL);
|
|
|
|
+ complete(&twi->comp);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
|
|
|
|
+ old_status, twi->acks_left, twi->status);
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return IRQ_HANDLED;
|
2008-04-23 23:25:37 +03:00
|
|
|
+}
|
|
|
|
+
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Return list of supported functionality.
|
|
|
|
+ *
|
|
|
|
+ * NOTE: see warning above about repeated starts; this driver is falsely
|
|
|
|
+ * claiming to support "combined" transfers. The mid-message STOPs mean
|
|
|
|
+ * some slaves will never work with this driver. (Use i2c-gpio...)
|
|
|
|
+ */
|
|
|
|
+static u32 twi_func(struct i2c_adapter *adapter)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
|
|
|
|
+ & ~I2C_FUNC_SMBUS_QUICK;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct i2c_algorithm twi_algorithm = {
|
|
|
|
+ .master_xfer = twi_xfer,
|
|
|
|
+ .functionality = twi_func,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Main initialization routine.
|
|
|
|
+ */
|
|
|
|
+static int __init twi_probe(struct platform_device *pdev)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct atmel_twi *twi;
|
|
|
|
+ struct resource *regs;
|
|
|
|
+ struct clk *pclk;
|
|
|
|
+ struct i2c_adapter *adapter;
|
|
|
|
+ int rc, irq;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs)
|
|
|
|
+ return -ENXIO;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ pclk = clk_get(&pdev->dev, "twi_pclk");
|
|
|
|
+ if (IS_ERR(pclk))
|
|
|
|
+ return PTR_ERR(pclk);
|
|
|
|
+ clk_enable(pclk);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ rc = -ENOMEM;
|
|
|
|
+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
|
|
|
|
+ if (!twi) {
|
|
|
|
+ dev_dbg(&pdev->dev, "can't allocate interface!\n");
|
|
|
|
+ goto err_alloc_twi;
|
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ twi->pclk = pclk;
|
|
|
|
+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!twi->regs)
|
|
|
|
+ goto err_ioremap;
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
|
|
|
|
+ if (rc) {
|
|
|
|
+ dev_dbg(&pdev->dev, "can't bind irq!\n");
|
|
|
|
+ goto err_irq;
|
|
|
|
+ }
|
|
|
|
+ twi->irq = irq;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ rc = twi_hwinit(twi);
|
|
|
|
+ if (rc) {
|
|
|
|
+ dev_err(&pdev->dev, "Unable to set baudrate\n");
|
|
|
|
+ goto err_hw_init;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ adapter = &twi->adapter;
|
|
|
|
+ sprintf(adapter->name, "TWI");
|
|
|
|
+ adapter->algo = &twi_algorithm;
|
|
|
|
+ adapter->class = I2C_CLASS_ALL;
|
|
|
|
+ adapter->nr = pdev->id;
|
|
|
|
+ adapter->dev.parent = &pdev->dev;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ platform_set_drvdata(pdev, twi);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ rc = i2c_add_numbered_adapter(adapter);
|
|
|
|
+ if (rc) {
|
|
|
|
+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
|
|
|
|
+ adapter->name);
|
|
|
|
+ goto err_register;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ dev_info(&pdev->dev,
|
|
|
|
+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
|
|
|
|
+ baudrate/1000, (unsigned long)regs->start);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+err_register:
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+
|
|
|
|
+err_hw_init:
|
|
|
|
+ free_irq(irq, twi);
|
|
|
|
+
|
|
|
|
+err_irq:
|
|
|
|
+ iounmap(twi->regs);
|
|
|
|
+
|
|
|
|
+err_ioremap:
|
|
|
|
+ kfree(twi);
|
|
|
|
+
|
|
|
|
+err_alloc_twi:
|
|
|
|
+ clk_disable(pclk);
|
|
|
|
+ clk_put(pclk);
|
|
|
|
+
|
|
|
|
+ return rc;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static int __exit twi_remove(struct platform_device *pdev)
|
2007-07-12 17:11:31 +03:00
|
|
|
+{
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct atmel_twi *twi = platform_get_drvdata(pdev);
|
|
|
|
+ int res;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+ res = i2c_del_adapter(&twi->adapter);
|
|
|
|
+ twi_writel(twi, CR, TWI_BIT(MSDIS));
|
|
|
|
+ iounmap(twi->regs);
|
|
|
|
+ clk_disable(twi->pclk);
|
|
|
|
+ clk_put(twi->pclk);
|
|
|
|
+ free_irq(twi->irq, twi);
|
|
|
|
+ kfree(twi);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+ return res;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+static struct platform_driver twi_driver = {
|
|
|
|
+ .remove = __exit_p(twi_remove),
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "atmel_twi",
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init atmel_twi_init(void)
|
|
|
|
+{
|
|
|
|
+ return platform_driver_probe(&twi_driver, twi_probe);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit atmel_twi_exit(void)
|
|
|
|
+{
|
|
|
|
+ platform_driver_unregister(&twi_driver);
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+module_init(atmel_twi_init);
|
|
|
|
+module_exit(atmel_twi_exit);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+MODULE_AUTHOR("Espen Krangnes");
|
|
|
|
+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
|
|
|
|
+MODULE_LICENSE("GPL");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/i2c/busses/i2c-atmeltwi.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,117 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
+/*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * Register definitions for the Atmel Two-Wire Interface
|
2008-04-23 23:25:37 +03:00
|
|
|
+ */
|
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#ifndef __ATMELTWI_H__
|
|
|
|
+#define __ATMELTWI_H__
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* TWI register offsets */
|
|
|
|
+#define TWI_CR 0x0000
|
|
|
|
+#define TWI_MMR 0x0004
|
|
|
|
+#define TWI_SMR 0x0008
|
|
|
|
+#define TWI_IADR 0x000c
|
|
|
|
+#define TWI_CWGR 0x0010
|
|
|
|
+#define TWI_SR 0x0020
|
|
|
|
+#define TWI_IER 0x0024
|
|
|
|
+#define TWI_IDR 0x0028
|
|
|
|
+#define TWI_IMR 0x002c
|
|
|
|
+#define TWI_RHR 0x0030
|
|
|
|
+#define TWI_THR 0x0034
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Bitfields in CR */
|
|
|
|
+#define TWI_START_OFFSET 0
|
|
|
|
+#define TWI_START_SIZE 1
|
|
|
|
+#define TWI_STOP_OFFSET 1
|
|
|
|
+#define TWI_STOP_SIZE 1
|
|
|
|
+#define TWI_MSEN_OFFSET 2
|
|
|
|
+#define TWI_MSEN_SIZE 1
|
|
|
|
+#define TWI_MSDIS_OFFSET 3
|
|
|
|
+#define TWI_MSDIS_SIZE 1
|
|
|
|
+#define TWI_SVEN_OFFSET 4
|
|
|
|
+#define TWI_SVEN_SIZE 1
|
|
|
|
+#define TWI_SVDIS_OFFSET 5
|
|
|
|
+#define TWI_SVDIS_SIZE 1
|
|
|
|
+#define TWI_SWRST_OFFSET 7
|
|
|
|
+#define TWI_SWRST_SIZE 1
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/* Bitfields in MMR */
|
|
|
|
+#define TWI_IADRSZ_OFFSET 8
|
|
|
|
+#define TWI_IADRSZ_SIZE 2
|
|
|
|
+#define TWI_MREAD_OFFSET 12
|
|
|
|
+#define TWI_MREAD_SIZE 1
|
|
|
|
+#define TWI_DADR_OFFSET 16
|
|
|
|
+#define TWI_DADR_SIZE 7
|
|
|
|
+
|
|
|
|
+/* Bitfields in SMR */
|
|
|
|
+#define TWI_SADR_OFFSET 16
|
|
|
|
+#define TWI_SADR_SIZE 7
|
|
|
|
+
|
|
|
|
+/* Bitfields in IADR */
|
|
|
|
+#define TWI_IADR_OFFSET 0
|
|
|
|
+#define TWI_IADR_SIZE 24
|
|
|
|
+
|
|
|
|
+/* Bitfields in CWGR */
|
|
|
|
+#define TWI_CLDIV_OFFSET 0
|
|
|
|
+#define TWI_CLDIV_SIZE 8
|
|
|
|
+#define TWI_CHDIV_OFFSET 8
|
|
|
|
+#define TWI_CHDIV_SIZE 8
|
|
|
|
+#define TWI_CKDIV_OFFSET 16
|
|
|
|
+#define TWI_CKDIV_SIZE 3
|
|
|
|
+
|
|
|
|
+/* Bitfields in SR */
|
|
|
|
+#define TWI_TXCOMP_OFFSET 0
|
|
|
|
+#define TWI_TXCOMP_SIZE 1
|
|
|
|
+#define TWI_RXRDY_OFFSET 1
|
|
|
|
+#define TWI_RXRDY_SIZE 1
|
|
|
|
+#define TWI_TXRDY_OFFSET 2
|
|
|
|
+#define TWI_TXRDY_SIZE 1
|
|
|
|
+#define TWI_SVDIR_OFFSET 3
|
|
|
|
+#define TWI_SVDIR_SIZE 1
|
|
|
|
+#define TWI_SVACC_OFFSET 4
|
|
|
|
+#define TWI_SVACC_SIZE 1
|
|
|
|
+#define TWI_GCACC_OFFSET 5
|
|
|
|
+#define TWI_GCACC_SIZE 1
|
|
|
|
+#define TWI_OVRE_OFFSET 6
|
|
|
|
+#define TWI_OVRE_SIZE 1
|
|
|
|
+#define TWI_UNRE_OFFSET 7
|
|
|
|
+#define TWI_UNRE_SIZE 1
|
|
|
|
+#define TWI_NACK_OFFSET 8
|
|
|
|
+#define TWI_NACK_SIZE 1
|
|
|
|
+#define TWI_ARBLST_OFFSET 9
|
|
|
|
+#define TWI_ARBLST_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in RHR */
|
|
|
|
+#define TWI_RXDATA_OFFSET 0
|
|
|
|
+#define TWI_RXDATA_SIZE 8
|
|
|
|
+
|
|
|
|
+/* Bitfields in THR */
|
|
|
|
+#define TWI_TXDATA_OFFSET 0
|
|
|
|
+#define TWI_TXDATA_SIZE 8
|
|
|
|
+
|
|
|
|
+/* Constants for IADRSZ */
|
|
|
|
+#define TWI_IADRSZ_NO_ADDR 0
|
|
|
|
+#define TWI_IADRSZ_ONE_BYTE 1
|
|
|
|
+#define TWI_IADRSZ_TWO_BYTES 2
|
|
|
|
+#define TWI_IADRSZ_THREE_BYTES 3
|
|
|
|
+
|
|
|
|
+/* Bit manipulation macros */
|
|
|
|
+#define TWI_BIT(name) \
|
|
|
|
+ (1 << TWI_##name##_OFFSET)
|
|
|
|
+#define TWI_BF(name, value) \
|
|
|
|
+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
|
|
|
|
+ << TWI_##name##_OFFSET)
|
|
|
|
+#define TWI_BFEXT(name, value) \
|
|
|
|
+ (((value) >> TWI_##name##_OFFSET) \
|
|
|
|
+ & ((1 << TWI_##name##_SIZE) - 1))
|
|
|
|
+#define TWI_BFINS(name, value, old) \
|
|
|
|
+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
|
|
|
|
+ << TWI_##name##_OFFSET)) \
|
|
|
|
+ | TWI_BF(name, (value)))
|
|
|
|
+
|
|
|
|
+/* Register access macros */
|
|
|
|
+#define twi_readl(port, reg) \
|
|
|
|
+ __raw_readl((port)->regs + TWI_##reg)
|
|
|
|
+#define twi_writel(port, reg, value) \
|
|
|
|
+ __raw_writel((value), (port)->regs + TWI_##reg)
|
|
|
|
+
|
|
|
|
+#endif /* __ATMELTWI_H__ */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/input/serio/Kconfig
|
|
|
|
+++ b/drivers/input/serio/Kconfig
|
|
|
|
@@ -88,6 +88,17 @@
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
|
|
module will be called rpckbd.
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
+config SERIO_AT32PSIF
|
|
|
|
+ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
|
|
|
|
+ depends on AVR32
|
|
|
|
+ default n
|
2008-06-13 00:13:40 +03:00
|
|
|
+ help
|
2008-07-05 17:49:07 +03:00
|
|
|
+ Say Y here if you want to use the PSIF peripheral on AVR32 devices
|
|
|
|
+ and connect a PS/2 keyboard and/or mouse to it.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ To compile this driver as a module, choose M here: the module will
|
|
|
|
+ be called at32psif.
|
|
|
|
+
|
|
|
|
config SERIO_AMBAKMI
|
|
|
|
tristate "AMBA KMI keyboard controller"
|
|
|
|
depends on ARM_AMBA
|
|
|
|
--- a/drivers/input/serio/Makefile
|
|
|
|
+++ b/drivers/input/serio/Makefile
|
|
|
|
@@ -12,6 +12,7 @@
|
|
|
|
obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
|
|
|
|
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
|
|
|
|
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
|
|
|
|
+obj-$(CONFIG_SERIO_AT32PSIF) += at32psif.o
|
|
|
|
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
|
|
|
|
obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
|
|
|
|
obj-$(CONFIG_HP_SDC) += hp_sdc.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/input/serio/at32psif.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,351 @@
|
|
|
|
+/*
|
|
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
|
|
+ * by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <linux/kernel.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/device.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/serio.h>
|
|
|
|
+#include <linux/timer.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/io.h>
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+
|
|
|
|
+#include "at32psif.h"
|
|
|
|
+
|
|
|
|
+#define PSIF_BUF_SIZE 16
|
|
|
|
+
|
|
|
|
+#define ring_is_empty(_psif) (_psif->head == _psif->tail)
|
|
|
|
+#define ring_next_head(_psif) ((_psif->head + 1) & (PSIF_BUF_SIZE - 1))
|
|
|
|
+#define ring_next_tail(_psif) ((_psif->tail + 1) & (PSIF_BUF_SIZE - 1))
|
|
|
|
+
|
|
|
|
+struct psif {
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+ struct clk *pclk;
|
|
|
|
+ struct serio *io;
|
|
|
|
+ struct timer_list tx_timer;
|
|
|
|
+ void __iomem *regs;
|
|
|
|
+ unsigned int irq;
|
|
|
|
+ unsigned int open;
|
|
|
|
+ /* Prevent concurrent writes to circular buffer. */
|
|
|
|
+ spinlock_t lock;
|
|
|
|
+ unsigned int head;
|
|
|
|
+ unsigned int tail;
|
|
|
|
+ unsigned char buffer[PSIF_BUF_SIZE];
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static irqreturn_t psif_interrupt(int irq, void *_ptr)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = _ptr;
|
|
|
|
+ int retval = IRQ_NONE;
|
|
|
|
+ unsigned int io_flags = 0;
|
|
|
|
+ unsigned long status;
|
|
|
|
+
|
|
|
|
+ status = psif_readl(psif, SR);
|
|
|
|
+
|
|
|
|
+ if (status & PSIF_BIT(RXRDY)) {
|
|
|
|
+ unsigned char val = (unsigned char) psif_readl(psif, RHR);
|
|
|
|
+
|
|
|
|
+ if (status & PSIF_BIT(PARITY))
|
|
|
|
+ io_flags |= SERIO_PARITY;
|
|
|
|
+ if (status & PSIF_BIT(OVRUN))
|
|
|
|
+ dev_err(&psif->pdev->dev, "overrun read error\n");
|
|
|
|
+
|
|
|
|
+ serio_interrupt(psif->io, val, io_flags);
|
|
|
|
+
|
|
|
|
+ retval = IRQ_HANDLED;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ spin_lock(&psif->lock);
|
|
|
|
+
|
|
|
|
+ if (status & PSIF_BIT(TXEMPTY)) {
|
|
|
|
+ if (status & PSIF_BIT(NACK))
|
|
|
|
+ dev_err(&psif->pdev->dev, "NACK error\n");
|
|
|
|
+
|
|
|
|
+ psif_writel(psif, IDR, PSIF_BIT(TXEMPTY));
|
|
|
|
+
|
|
|
|
+ if (!ring_is_empty(psif))
|
|
|
|
+ mod_timer(&psif->tx_timer,
|
|
|
|
+ jiffies + msecs_to_jiffies(1));
|
|
|
|
+
|
|
|
|
+ retval = IRQ_HANDLED;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ spin_unlock(&psif->lock);
|
|
|
|
+
|
|
|
|
+ return retval;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void psif_transmit_data(unsigned long data)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = (struct psif *)data;
|
|
|
|
+ unsigned long flags;
|
|
|
|
+
|
|
|
|
+ spin_lock_irqsave(&psif->lock, flags);
|
|
|
|
+
|
|
|
|
+ psif_writel(psif, THR, psif->buffer[psif->tail]);
|
|
|
|
+ psif->tail = ring_next_tail(psif);
|
|
|
|
+
|
|
|
|
+ if (!ring_is_empty(psif))
|
|
|
|
+ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
|
|
|
|
+
|
|
|
|
+ spin_unlock_irqrestore(&psif->lock, flags);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int psif_write(struct serio *io, unsigned char val)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = io->port_data;
|
|
|
|
+ unsigned long flags;
|
|
|
|
+ unsigned int head;
|
|
|
|
+
|
|
|
|
+ spin_lock_irqsave(&psif->lock, flags);
|
|
|
|
+
|
|
|
|
+ head = ring_next_head(psif);
|
|
|
|
+
|
|
|
|
+ if (head != psif->tail) {
|
|
|
|
+ psif->buffer[psif->head] = val;
|
|
|
|
+ psif->head = head;
|
|
|
|
+ } else {
|
|
|
|
+ dev_err(&psif->pdev->dev, "underrun write error\n");
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ spin_unlock_irqrestore(&psif->lock, flags);
|
|
|
|
+
|
|
|
|
+ /* Make sure TXEMPTY interrupt is enabled. */
|
|
|
|
+ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int psif_open(struct serio *io)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = io->port_data;
|
|
|
|
+ int retval;
|
|
|
|
+
|
|
|
|
+ retval = clk_enable(psif->pclk);
|
|
|
|
+ if (retval)
|
|
|
|
+ goto out;
|
|
|
|
+
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
|
|
|
|
+ psif_writel(psif, IER, PSIF_BIT(RXRDY));
|
|
|
|
+
|
|
|
|
+ psif->open = 1;
|
|
|
|
+out:
|
|
|
|
+ return retval;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void psif_close(struct serio *io)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = io->port_data;
|
|
|
|
+
|
|
|
|
+ psif->open = 0;
|
|
|
|
+
|
|
|
|
+ psif_writel(psif, IDR, ~0UL);
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
|
|
|
|
+
|
|
|
|
+ clk_disable(psif->pclk);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void psif_set_prescaler(struct psif *psif)
|
|
|
|
+{
|
|
|
|
+ unsigned long prscv;
|
|
|
|
+ unsigned long rate = clk_get_rate(psif->pclk);
|
|
|
|
+
|
|
|
|
+ /* PRSCV = Pulse length (100 us) * PSIF module frequency. */
|
|
|
|
+ prscv = 100 * (rate / 1000000UL);
|
|
|
|
+
|
|
|
|
+ if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
|
|
|
|
+ prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
|
|
|
|
+ dev_dbg(&psif->pdev->dev, "pclk too fast, "
|
|
|
|
+ "prescaler set to max\n");
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ clk_enable(psif->pclk);
|
|
|
|
+ psif_writel(psif, PSR, prscv);
|
|
|
|
+ clk_disable(psif->pclk);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int __init psif_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct resource *regs;
|
|
|
|
+ struct psif *psif;
|
|
|
|
+ struct serio *io;
|
|
|
|
+ struct clk *pclk;
|
|
|
|
+ int irq;
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
|
|
|
|
+ if (!psif) {
|
|
|
|
+ dev_dbg(&pdev->dev, "out of memory\n");
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
|
|
|
+ psif->pdev = pdev;
|
|
|
|
+
|
|
|
|
+ io = kzalloc(sizeof(struct serio), GFP_KERNEL);
|
|
|
|
+ if (!io) {
|
|
|
|
+ dev_dbg(&pdev->dev, "out of memory\n");
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ goto out_free_psif;
|
|
|
|
+ }
|
|
|
|
+ psif->io = io;
|
|
|
|
+
|
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs) {
|
|
|
|
+ dev_dbg(&pdev->dev, "no mmio resources defined\n");
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ goto out_free_io;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!psif->regs) {
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
|
|
|
|
+ goto out_free_io;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ pclk = clk_get(&pdev->dev, "pclk");
|
|
|
|
+ if (IS_ERR(pclk)) {
|
|
|
|
+ dev_dbg(&pdev->dev, "could not get peripheral clock\n");
|
|
|
|
+ ret = PTR_ERR(pclk);
|
|
|
|
+ goto out_iounmap;
|
|
|
|
+ }
|
|
|
|
+ psif->pclk = pclk;
|
|
|
|
+
|
|
|
|
+ /* Reset the PSIF to enter at a known state. */
|
|
|
|
+ ret = clk_enable(pclk);
|
|
|
|
+ if (ret) {
|
|
|
|
+ dev_dbg(&pdev->dev, "could not enable pclk\n");
|
|
|
|
+ goto out_put_clk;
|
|
|
|
+ }
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
|
|
|
|
+ clk_disable(pclk);
|
|
|
|
+
|
|
|
|
+ setup_timer(&psif->tx_timer, psif_transmit_data, (unsigned long)psif);
|
|
|
|
+
|
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ if (irq < 0) {
|
|
|
|
+ dev_dbg(&pdev->dev, "could not get irq\n");
|
|
|
|
+ ret = -ENXIO;
|
|
|
|
+ goto out_put_clk;
|
|
|
|
+ }
|
|
|
|
+ ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
|
|
|
|
+ if (ret) {
|
|
|
|
+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
|
|
|
|
+ goto out_put_clk;
|
|
|
|
+ }
|
|
|
|
+ psif->irq = irq;
|
|
|
|
+
|
|
|
|
+ io->id.type = SERIO_8042;
|
|
|
|
+ io->write = psif_write;
|
|
|
|
+ io->open = psif_open;
|
|
|
|
+ io->close = psif_close;
|
|
|
|
+ strlcpy(io->name, pdev->dev.bus_id, sizeof(io->name));
|
|
|
|
+ strlcpy(io->phys, pdev->dev.bus_id, sizeof(io->phys));
|
|
|
|
+ io->port_data = psif;
|
|
|
|
+ io->dev.parent = &pdev->dev;
|
|
|
|
+
|
|
|
|
+ psif_set_prescaler(psif);
|
|
|
|
+
|
|
|
|
+ spin_lock_init(&psif->lock);
|
|
|
|
+ serio_register_port(psif->io);
|
|
|
|
+ platform_set_drvdata(pdev, psif);
|
|
|
|
+
|
|
|
|
+ dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
|
|
|
|
+ (int)psif->regs, psif->irq);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+out_put_clk:
|
|
|
|
+ clk_put(psif->pclk);
|
|
|
|
+out_iounmap:
|
|
|
|
+ iounmap(psif->regs);
|
|
|
|
+out_free_io:
|
|
|
|
+ kfree(io);
|
|
|
|
+out_free_psif:
|
|
|
|
+ kfree(psif);
|
|
|
|
+out:
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int __exit psif_remove(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = platform_get_drvdata(pdev);
|
|
|
|
+
|
|
|
|
+ psif_writel(psif, IDR, ~0UL);
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
|
|
|
|
+
|
|
|
|
+ serio_unregister_port(psif->io);
|
|
|
|
+ iounmap(psif->regs);
|
|
|
|
+ free_irq(psif->irq, psif);
|
|
|
|
+ clk_put(psif->pclk);
|
|
|
|
+ kfree(psif);
|
|
|
|
+
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+static int psif_suspend(struct platform_device *pdev, pm_message_t state)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = platform_get_drvdata(pdev);
|
|
|
|
+
|
|
|
|
+ if (psif->open) {
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
|
|
|
|
+ clk_disable(psif->pclk);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int psif_resume(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct psif *psif = platform_get_drvdata(pdev);
|
|
|
|
+
|
|
|
|
+ if (psif->open) {
|
|
|
|
+ clk_enable(psif->pclk);
|
|
|
|
+ psif_set_prescaler(psif);
|
|
|
|
+ psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+#else
|
|
|
|
+#define psif_suspend NULL
|
|
|
|
+#define psif_resume NULL
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+static struct platform_driver psif_driver = {
|
|
|
|
+ .remove = __exit_p(psif_remove),
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "atmel_psif",
|
|
|
|
+ },
|
|
|
|
+ .suspend = psif_suspend,
|
|
|
|
+ .resume = psif_resume,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init psif_init(void)
|
|
|
|
+{
|
|
|
|
+ return platform_driver_probe(&psif_driver, psif_probe);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit psif_exit(void)
|
|
|
|
+{
|
|
|
|
+ platform_driver_unregister(&psif_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+module_init(psif_init);
|
|
|
|
+module_exit(psif_exit);
|
|
|
|
+
|
|
|
|
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
|
|
|
|
+MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
|
|
|
|
+MODULE_LICENSE("GPL");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/input/serio/at32psif.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,82 @@
|
|
|
|
+/*
|
|
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
|
|
+ * by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#ifndef _AT32PSIF_H
|
|
|
|
+#define _AT32PSIF_H
|
|
|
|
+
|
|
|
|
+/* PSIF register offsets */
|
|
|
|
+#define PSIF_CR 0x00
|
|
|
|
+#define PSIF_RHR 0x04
|
|
|
|
+#define PSIF_THR 0x08
|
|
|
|
+#define PSIF_SR 0x10
|
|
|
|
+#define PSIF_IER 0x14
|
|
|
|
+#define PSIF_IDR 0x18
|
|
|
|
+#define PSIF_IMR 0x1c
|
|
|
|
+#define PSIF_PSR 0x24
|
|
|
|
+
|
|
|
|
+/* Bitfields in control register. */
|
|
|
|
+#define PSIF_CR_RXDIS_OFFSET 1
|
|
|
|
+#define PSIF_CR_RXDIS_SIZE 1
|
|
|
|
+#define PSIF_CR_RXEN_OFFSET 0
|
|
|
|
+#define PSIF_CR_RXEN_SIZE 1
|
|
|
|
+#define PSIF_CR_SWRST_OFFSET 15
|
|
|
|
+#define PSIF_CR_SWRST_SIZE 1
|
|
|
|
+#define PSIF_CR_TXDIS_OFFSET 9
|
|
|
|
+#define PSIF_CR_TXDIS_SIZE 1
|
|
|
|
+#define PSIF_CR_TXEN_OFFSET 8
|
|
|
|
+#define PSIF_CR_TXEN_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in interrupt disable, enable, mask and status register. */
|
|
|
|
+#define PSIF_NACK_OFFSET 8
|
|
|
|
+#define PSIF_NACK_SIZE 1
|
|
|
|
+#define PSIF_OVRUN_OFFSET 5
|
|
|
|
+#define PSIF_OVRUN_SIZE 1
|
|
|
|
+#define PSIF_PARITY_OFFSET 9
|
|
|
|
+#define PSIF_PARITY_SIZE 1
|
|
|
|
+#define PSIF_RXRDY_OFFSET 4
|
|
|
|
+#define PSIF_RXRDY_SIZE 1
|
|
|
|
+#define PSIF_TXEMPTY_OFFSET 1
|
|
|
|
+#define PSIF_TXEMPTY_SIZE 1
|
|
|
|
+#define PSIF_TXRDY_OFFSET 0
|
|
|
|
+#define PSIF_TXRDY_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in prescale register. */
|
|
|
|
+#define PSIF_PSR_PRSCV_OFFSET 0
|
|
|
|
+#define PSIF_PSR_PRSCV_SIZE 12
|
|
|
|
+
|
|
|
|
+/* Bitfields in receive hold register. */
|
|
|
|
+#define PSIF_RHR_RXDATA_OFFSET 0
|
|
|
|
+#define PSIF_RHR_RXDATA_SIZE 8
|
|
|
|
+
|
|
|
|
+/* Bitfields in transmit hold register. */
|
|
|
|
+#define PSIF_THR_TXDATA_OFFSET 0
|
|
|
|
+#define PSIF_THR_TXDATA_SIZE 8
|
|
|
|
+
|
|
|
|
+/* Bit manipulation macros */
|
|
|
|
+#define PSIF_BIT(name) \
|
|
|
|
+ (1 << PSIF_##name##_OFFSET)
|
|
|
|
+#define PSIF_BF(name, value) \
|
|
|
|
+ (((value) & ((1 << PSIF_##name##_SIZE) - 1)) \
|
|
|
|
+ << PSIF_##name##_OFFSET)
|
|
|
|
+#define PSIF_BFEXT(name, value)\
|
|
|
|
+ (((value) >> PSIF_##name##_OFFSET) \
|
|
|
|
+ & ((1 << PSIF_##name##_SIZE) - 1))
|
|
|
|
+#define PSIF_BFINS(name, value, old) \
|
|
|
|
+ (((old) & ~(((1 << PSIF_##name##_SIZE) - 1) \
|
|
|
|
+ << PSIF_##name##_OFFSET)) \
|
|
|
|
+ | PSIF_BF(name, value))
|
|
|
|
+
|
|
|
|
+/* Register access macros */
|
|
|
|
+#define psif_readl(port, reg) \
|
|
|
|
+ __raw_readl((port)->regs + PSIF_##reg)
|
|
|
|
+#define psif_writel(port, reg, value) \
|
|
|
|
+ __raw_writel((value), (port)->regs + PSIF_##reg)
|
|
|
|
+
|
|
|
|
+#endif /* _AT32PSIF_H */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/misc/Kconfig
|
|
|
|
+++ b/drivers/misc/Kconfig
|
|
|
|
@@ -22,6 +22,39 @@
|
|
|
|
purposes including software controlled power-efficent backlights
|
|
|
|
on LCD displays, motor control, and waveform generation.
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
+config ATMEL_TCLIB
|
|
|
|
+ bool "Atmel AT32/AT91 Timer/Counter Library"
|
|
|
|
+ depends on (AVR32 || ARCH_AT91)
|
2008-06-13 00:13:40 +03:00
|
|
|
+ help
|
2008-07-05 17:49:07 +03:00
|
|
|
+ Select this if you want a library to allocate the Timer/Counter
|
|
|
|
+ blocks found on many Atmel processors. This facilitates using
|
|
|
|
+ these blocks by different drivers despite processor differences.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+config ATMEL_TCB_CLKSRC
|
|
|
|
+ bool "TC Block Clocksource"
|
|
|
|
+ depends on ATMEL_TCLIB && GENERIC_TIME
|
|
|
|
+ default y
|
|
|
|
+ help
|
|
|
|
+ Select this to get a high precision clocksource based on a
|
|
|
|
+ TC block with a 5+ MHz base clock rate. Two timer channels
|
|
|
|
+ are combined to make a single 32-bit timer.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ When GENERIC_CLOCKEVENTS is defined, the third timer channel
|
|
|
|
+ may be used as a clock event device supporting oneshot mode
|
|
|
|
+ (delays of up to two seconds) based on the 32 KiHz clock.
|
|
|
|
+
|
|
|
|
+config ATMEL_TCB_CLKSRC_BLOCK
|
|
|
|
+ int
|
|
|
|
+ depends on ATMEL_TCB_CLKSRC
|
|
|
|
+ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
|
|
|
|
+ default 0
|
|
|
|
+ range 0 1
|
|
|
|
+ help
|
|
|
|
+ Some chips provide more than one TC block, so you have the
|
|
|
|
+ choice of which one to use for the clock framework. The other
|
|
|
|
+ TC can be used for other purposes, such as PWM generation and
|
|
|
|
+ interval timing.
|
|
|
|
+
|
|
|
|
config IBM_ASM
|
|
|
|
tristate "Device driver for IBM RSA service processor"
|
|
|
|
depends on X86 && PCI && INPUT && EXPERIMENTAL
|
|
|
|
--- a/drivers/misc/Makefile
|
|
|
|
+++ b/drivers/misc/Makefile
|
|
|
|
@@ -10,6 +10,7 @@
|
|
|
|
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
|
|
|
|
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
|
|
|
|
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
|
|
|
|
+obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
|
|
|
|
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
|
|
|
|
obj-$(CONFIG_LKDTM) += lkdtm.o
|
|
|
|
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/misc/atmel_tclib.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,161 @@
|
|
|
|
+#include <linux/atmel_tc.h>
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/io.h>
|
|
|
|
+#include <linux/ioport.h>
|
|
|
|
+#include <linux/kernel.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+
|
|
|
|
+/* Number of bytes to reserve for the iomem resource */
|
|
|
|
+#define ATMEL_TC_IOMEM_SIZE 256
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * This is a thin library to solve the problem of how to portably allocate
|
|
|
|
+ * one of the TC blocks. For simplicity, it doesn't currently expect to
|
|
|
|
+ * share individual timers between different drivers.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#if defined(CONFIG_AVR32)
|
|
|
|
+/* AVR32 has these divide PBB */
|
|
|
|
+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
|
|
|
|
+EXPORT_SYMBOL(atmel_tc_divisors);
|
|
|
|
+
|
|
|
|
+#elif defined(CONFIG_ARCH_AT91)
|
|
|
|
+/* AT91 has these divide MCK */
|
|
|
|
+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
|
|
|
|
+EXPORT_SYMBOL(atmel_tc_divisors);
|
|
|
|
+
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+static DEFINE_SPINLOCK(tc_list_lock);
|
|
|
|
+static LIST_HEAD(tc_list);
|
|
|
|
+
|
|
|
|
+/**
|
|
|
|
+ * atmel_tc_alloc - allocate a specified TC block
|
|
|
|
+ * @block: which block to allocate
|
|
|
|
+ * @name: name to be associated with the iomem resource
|
|
|
|
+ *
|
|
|
|
+ * Caller allocates a block. If it is available, a pointer to a
|
|
|
|
+ * pre-initialized struct atmel_tc is returned. The caller can access
|
|
|
|
+ * the registers directly through the "regs" field.
|
|
|
|
+ */
|
|
|
|
+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
|
|
|
|
+{
|
|
|
|
+ struct atmel_tc *tc;
|
|
|
|
+ struct platform_device *pdev = NULL;
|
|
|
|
+ struct resource *r;
|
|
|
|
+
|
|
|
|
+ spin_lock(&tc_list_lock);
|
|
|
|
+ list_for_each_entry(tc, &tc_list, node) {
|
|
|
|
+ if (tc->pdev->id == block) {
|
|
|
|
+ pdev = tc->pdev;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (!pdev || tc->iomem)
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
|
|
|
|
+ if (!r)
|
|
|
|
+ goto fail;
|
|
|
|
+
|
|
|
|
+ tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
|
|
|
|
+ if (!tc->regs)
|
|
|
|
+ goto fail_ioremap;
|
|
|
|
+
|
|
|
|
+ tc->iomem = r;
|
|
|
|
+
|
|
|
|
+out:
|
|
|
|
+ spin_unlock(&tc_list_lock);
|
|
|
|
+ return tc;
|
|
|
|
+
|
|
|
|
+fail_ioremap:
|
|
|
|
+ release_resource(r);
|
|
|
|
+fail:
|
|
|
|
+ tc = NULL;
|
|
|
|
+ goto out;
|
|
|
|
+}
|
|
|
|
+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
|
|
|
|
+
|
|
|
|
+/**
|
|
|
|
+ * atmel_tc_free - release a specified TC block
|
|
|
|
+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
|
|
|
|
+ *
|
|
|
|
+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
|
|
|
|
+ * registers, invalidating the resource returned by that routine and
|
|
|
|
+ * making the TC available to other drivers.
|
|
|
|
+ */
|
|
|
|
+void atmel_tc_free(struct atmel_tc *tc)
|
|
|
|
+{
|
|
|
|
+ spin_lock(&tc_list_lock);
|
|
|
|
+ if (tc->regs) {
|
|
|
|
+ iounmap(tc->regs);
|
|
|
|
+ release_resource(tc->iomem);
|
|
|
|
+ tc->regs = NULL;
|
|
|
|
+ tc->iomem = NULL;
|
|
|
|
+ }
|
|
|
|
+ spin_unlock(&tc_list_lock);
|
|
|
|
+}
|
|
|
|
+EXPORT_SYMBOL_GPL(atmel_tc_free);
|
|
|
|
+
|
|
|
|
+static int __init tc_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct atmel_tc *tc;
|
|
|
|
+ struct clk *clk;
|
|
|
|
+ int irq;
|
|
|
|
+
|
|
|
|
+ if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ if (irq < 0)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
|
|
|
|
+ if (!tc)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+
|
|
|
|
+ tc->pdev = pdev;
|
|
|
|
+
|
|
|
|
+ clk = clk_get(&pdev->dev, "t0_clk");
|
|
|
|
+ if (IS_ERR(clk)) {
|
|
|
|
+ kfree(tc);
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ tc->clk[0] = clk;
|
|
|
|
+ tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
|
|
|
|
+ if (IS_ERR(tc->clk[1]))
|
|
|
|
+ tc->clk[1] = clk;
|
|
|
|
+ tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
|
|
|
|
+ if (IS_ERR(tc->clk[2]))
|
|
|
|
+ tc->clk[2] = clk;
|
|
|
|
+
|
|
|
|
+ tc->irq[0] = irq;
|
|
|
|
+ tc->irq[1] = platform_get_irq(pdev, 1);
|
|
|
|
+ if (tc->irq[1] < 0)
|
|
|
|
+ tc->irq[1] = irq;
|
|
|
|
+ tc->irq[2] = platform_get_irq(pdev, 2);
|
|
|
|
+ if (tc->irq[2] < 0)
|
|
|
|
+ tc->irq[2] = irq;
|
|
|
|
+
|
|
|
|
+ spin_lock(&tc_list_lock);
|
|
|
|
+ list_add_tail(&tc->node, &tc_list);
|
|
|
|
+ spin_unlock(&tc_list_lock);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct platform_driver tc_driver = {
|
|
|
|
+ .driver.name = "atmel_tcb",
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init tc_init(void)
|
|
|
|
+{
|
|
|
|
+ return platform_driver_probe(&tc_driver, tc_probe);
|
|
|
|
+}
|
|
|
|
+arch_initcall(tc_init);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/mmc/host/Kconfig
|
|
|
|
+++ b/drivers/mmc/host/Kconfig
|
|
|
|
@@ -91,6 +91,16 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
If unsure, say N.
|
|
|
|
|
|
|
|
+config MMC_ATMELMCI
|
|
|
|
+ tristate "Atmel Multimedia Card Interface support"
|
|
|
|
+ depends on AVR32 && MMC
|
2008-06-13 00:13:40 +03:00
|
|
|
+ help
|
2008-07-05 17:49:07 +03:00
|
|
|
+ This selects the Atmel Multimedia Card Interface. If you have
|
|
|
|
+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
|
|
|
|
+ slot, say Y or M here.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ If unsure, say N.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
config MMC_IMX
|
|
|
|
tristate "Motorola i.MX Multimedia Card Interface support"
|
|
|
|
depends on ARCH_IMX
|
|
|
|
--- a/drivers/mmc/host/Makefile
|
|
|
|
+++ b/drivers/mmc/host/Makefile
|
|
|
|
@@ -15,6 +15,7 @@
|
|
|
|
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
|
|
|
|
obj-$(CONFIG_MMC_OMAP) += omap.o
|
|
|
|
obj-$(CONFIG_MMC_AT91) += at91_mci.o
|
|
|
|
+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
|
|
|
|
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
|
|
|
|
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
|
2008-07-26 13:53:23 +03:00
|
|
|
obj-$(CONFIG_GPIOMMC) += gpiommc.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/mmc/host/atmel-mci.c
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -0,0 +1,1234 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * Atmel MultiMedia Card Interface driver
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2004-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#include <linux/blkdev.h>
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/device.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/ioport.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+
|
|
|
|
+#include <linux/mmc/host.h>
|
|
|
|
+
|
|
|
|
+#include <asm/dma-controller.h>
|
|
|
|
+#include <asm/io.h>
|
|
|
|
+#include <asm/arch/board.h>
|
|
|
|
+#include <asm/arch/gpio.h>
|
|
|
|
+
|
|
|
|
+#include "atmel-mci.h"
|
|
|
|
+
|
|
|
|
+#define DRIVER_NAME "atmel_mci"
|
|
|
|
+
|
|
|
|
+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
|
|
|
|
+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
|
|
|
|
+
|
|
|
|
+enum {
|
|
|
|
+ EVENT_CMD_COMPLETE = 0,
|
|
|
|
+ EVENT_DATA_COMPLETE,
|
|
|
|
+ EVENT_DATA_ERROR,
|
|
|
|
+ EVENT_STOP_SENT,
|
|
|
|
+ EVENT_STOP_COMPLETE,
|
|
|
|
+ EVENT_DMA_COMPLETE,
|
|
|
|
+ EVENT_DMA_ERROR,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct atmel_mci_dma {
|
|
|
|
+ struct dma_request_sg req;
|
|
|
|
+ unsigned short rx_periph_id;
|
|
|
|
+ unsigned short tx_periph_id;
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct atmel_mci {
|
|
|
|
+ struct mmc_host *mmc;
|
|
|
|
+ void __iomem *regs;
|
|
|
|
+ struct atmel_mci_dma dma;
|
|
|
|
+
|
|
|
|
+ struct mmc_request *mrq;
|
|
|
|
+ struct mmc_command *cmd;
|
|
|
|
+ struct mmc_data *data;
|
|
|
|
+
|
|
|
|
+ u32 cmd_status;
|
|
|
|
+ u32 data_status;
|
|
|
|
+ u32 stop_status;
|
|
|
|
+ u32 stop_cmdr;
|
|
|
|
+
|
|
|
|
+ struct tasklet_struct tasklet;
|
|
|
|
+ unsigned long pending_events;
|
|
|
|
+ unsigned long completed_events;
|
|
|
|
+
|
|
|
|
+ int present;
|
|
|
|
+ int detect_pin;
|
|
|
|
+ int wp_pin;
|
|
|
|
+
|
|
|
|
+ /* For detect pin debouncing */
|
|
|
|
+ struct timer_list detect_timer;
|
|
|
|
+
|
|
|
|
+ unsigned long bus_hz;
|
|
|
|
+ unsigned long mapbase;
|
|
|
|
+ struct clk *mck;
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ int pending_stop;
|
2008-06-13 00:13:40 +03:00
|
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
|
|
+ struct dentry *debugfs_root;
|
|
|
|
+ struct dentry *debugfs_regs;
|
|
|
|
+ struct dentry *debugfs_req;
|
|
|
|
+ struct dentry *debugfs_pending_events;
|
|
|
|
+ struct dentry *debugfs_completed_events;
|
|
|
|
+#endif
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/* Those printks take an awful lot of time... */
|
|
|
|
+#ifndef DEBUG
|
|
|
|
+static unsigned int fmax = 15000000U;
|
|
|
|
+#else
|
|
|
|
+static unsigned int fmax = 1000000U;
|
|
|
|
+#endif
|
|
|
|
+module_param(fmax, uint, 0444);
|
|
|
|
+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
|
|
|
|
+
|
|
|
|
+/* Test bit macros for completed events */
|
|
|
|
+#define mci_cmd_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_data_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_data_error_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
|
|
+#define mci_stop_sent_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
|
|
+#define mci_stop_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_dma_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_dma_error_is_complete(host) \
|
|
|
|
+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
|
|
+
|
|
|
|
+/* Test and clear bit macros for pending events */
|
|
|
|
+#define mci_clear_cmd_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_data_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_data_error_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
|
|
+#define mci_clear_stop_sent_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
|
|
+#define mci_clear_stop_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_dma_error_is_pending(host) \
|
|
|
|
+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
|
|
+
|
|
|
|
+/* Test and set bit macros for completed events */
|
|
|
|
+#define mci_set_cmd_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_data_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_data_error_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
|
|
+#define mci_set_stop_sent_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
|
|
+#define mci_set_stop_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_dma_error_is_completed(host) \
|
|
|
|
+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
|
|
+
|
|
|
|
+/* Set bit macros for completed events */
|
|
|
|
+#define mci_set_cmd_complete(host) \
|
|
|
|
+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_data_complete(host) \
|
|
|
|
+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_data_error_complete(host) \
|
|
|
|
+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
|
|
+#define mci_set_stop_sent_complete(host) \
|
|
|
|
+ set_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
|
|
+#define mci_set_stop_complete(host) \
|
|
|
|
+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_dma_complete(host) \
|
|
|
|
+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
|
|
|
|
+#define mci_set_dma_error_complete(host) \
|
|
|
|
+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
|
|
+
|
|
|
|
+/* Set bit macros for pending events */
|
|
|
|
+#define mci_set_cmd_pending(host) \
|
|
|
|
+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_set_data_pending(host) \
|
|
|
|
+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_set_data_error_pending(host) \
|
|
|
|
+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
|
|
+#define mci_set_stop_sent_pending(host) \
|
|
|
|
+ set_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
|
|
+#define mci_set_stop_pending(host) \
|
|
|
|
+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_set_dma_error_pending(host) \
|
|
|
|
+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
|
|
+
|
|
|
|
+/* Clear bit macros for pending events */
|
|
|
|
+#define mci_clear_cmd_pending(host) \
|
|
|
|
+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_data_pending(host) \
|
|
|
|
+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_data_error_pending(host) \
|
|
|
|
+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
|
|
+#define mci_clear_stop_sent_pending(host) \
|
|
|
|
+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
|
|
+#define mci_clear_stop_pending(host) \
|
|
|
|
+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
|
|
+#define mci_clear_dma_error_pending(host) \
|
|
|
|
+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
|
|
+#include <linux/debugfs.h>
|
|
|
|
+
|
|
|
|
+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
|
|
|
|
+
|
|
|
|
+struct req_dbg_data {
|
|
|
|
+ unsigned int nbytes;
|
|
|
|
+ char str[DBG_REQ_BUF_SIZE];
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int req_dbg_open(struct inode *inode, struct file *file)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host;
|
|
|
|
+ struct mmc_request *mrq;
|
|
|
|
+ struct mmc_command *cmd, *stop;
|
|
|
|
+ struct mmc_data *data;
|
|
|
|
+ struct req_dbg_data *priv;
|
|
|
|
+ char *str;
|
|
|
|
+ unsigned long n = 0;
|
|
|
|
+
|
|
|
|
+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
|
|
|
|
+ if (!priv)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+ str = priv->str;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&inode->i_mutex);
|
|
|
|
+ host = inode->i_private;
|
|
|
|
+
|
|
|
|
+ spin_lock_irq(&host->mmc->lock);
|
|
|
|
+ mrq = host->mrq;
|
|
|
|
+ if (mrq) {
|
|
|
|
+ cmd = mrq->cmd;
|
|
|
|
+ data = mrq->data;
|
|
|
|
+ stop = mrq->stop;
|
|
|
|
+ n = snprintf(str, DBG_REQ_BUF_SIZE,
|
|
|
|
+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
|
|
|
|
+ cmd->opcode, cmd->arg, cmd->flags,
|
|
|
|
+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
|
|
+ cmd->resp[3], cmd->error);
|
|
|
|
+ if (n < DBG_REQ_BUF_SIZE && data)
|
|
|
|
+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
|
|
|
|
+ "DATA %u * %u (%u) %x (err %u)\n",
|
|
|
|
+ data->blocks, data->blksz,
|
|
|
|
+ data->bytes_xfered, data->flags,
|
|
|
|
+ data->error);
|
|
|
|
+ if (n < DBG_REQ_BUF_SIZE && stop)
|
|
|
|
+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
|
|
|
|
+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
|
|
|
|
+ stop->opcode, stop->arg, stop->flags,
|
|
|
|
+ stop->resp[0], stop->resp[1],
|
|
|
|
+ stop->resp[2], stop->resp[3],
|
|
|
|
+ stop->error);
|
|
|
|
+ }
|
|
|
|
+ spin_unlock_irq(&host->mmc->lock);
|
|
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
|
|
+
|
|
|
|
+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
|
|
|
|
+ file->private_data = priv;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static ssize_t req_dbg_read(struct file *file, char __user *buf,
|
|
|
|
+ size_t nbytes, loff_t *ppos)
|
|
|
|
+{
|
|
|
|
+ struct req_dbg_data *priv = file->private_data;
|
|
|
|
+
|
|
|
|
+ return simple_read_from_buffer(buf, nbytes, ppos,
|
|
|
|
+ priv->str, priv->nbytes);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int req_dbg_release(struct inode *inode, struct file *file)
|
|
|
|
+{
|
|
|
|
+ kfree(file->private_data);
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static const struct file_operations req_dbg_fops = {
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ .open = req_dbg_open,
|
|
|
|
+ .llseek = no_llseek,
|
|
|
|
+ .read = req_dbg_read,
|
|
|
|
+ .release = req_dbg_release,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int regs_dbg_open(struct inode *inode, struct file *file)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host;
|
|
|
|
+ unsigned int i;
|
|
|
|
+ u32 *data;
|
|
|
|
+ int ret = -ENOMEM;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&inode->i_mutex);
|
|
|
|
+ host = inode->i_private;
|
|
|
|
+ data = kmalloc(inode->i_size, GFP_KERNEL);
|
|
|
|
+ if (!data)
|
|
|
|
+ goto out;
|
|
|
|
+
|
|
|
|
+ spin_lock_irq(&host->mmc->lock);
|
|
|
|
+ for (i = 0; i < inode->i_size / 4; i++)
|
|
|
|
+ data[i] = __raw_readl(host->regs + i * 4);
|
|
|
|
+ spin_unlock_irq(&host->mmc->lock);
|
|
|
|
+
|
|
|
|
+ file->private_data = data;
|
|
|
|
+ ret = 0;
|
|
|
|
+
|
|
|
|
+out:
|
|
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
|
|
+
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
|
|
|
|
+ size_t nbytes, loff_t *ppos)
|
|
|
|
+{
|
|
|
|
+ struct inode *inode = file->f_dentry->d_inode;
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&inode->i_mutex);
|
|
|
|
+ ret = simple_read_from_buffer(buf, nbytes, ppos,
|
|
|
|
+ file->private_data,
|
|
|
|
+ file->f_dentry->d_inode->i_size);
|
|
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
|
|
+
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int regs_dbg_release(struct inode *inode, struct file *file)
|
|
|
|
+{
|
|
|
|
+ kfree(file->private_data);
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static const struct file_operations regs_dbg_fops = {
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ .open = regs_dbg_open,
|
|
|
|
+ .llseek = generic_file_llseek,
|
|
|
|
+ .read = regs_dbg_read,
|
|
|
|
+ .release = regs_dbg_release,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static void atmci_init_debugfs(struct atmel_mci *host)
|
|
|
|
+{
|
|
|
|
+ struct mmc_host *mmc;
|
|
|
|
+ struct dentry *root, *regs;
|
|
|
|
+ struct resource *res;
|
|
|
|
+
|
|
|
|
+ mmc = host->mmc;
|
|
|
|
+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
|
|
|
|
+ if (IS_ERR(root) || !root)
|
|
|
|
+ goto err_root;
|
|
|
|
+ host->debugfs_root = root;
|
|
|
|
+
|
|
|
|
+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
|
|
|
|
+ if (!regs)
|
|
|
|
+ goto err_regs;
|
|
|
|
+
|
|
|
|
+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ regs->d_inode->i_size = res->end - res->start + 1;
|
|
|
|
+ host->debugfs_regs = regs;
|
|
|
|
+
|
|
|
|
+ host->debugfs_req = debugfs_create_file("req", 0400, root,
|
|
|
|
+ host, &req_dbg_fops);
|
|
|
|
+ if (!host->debugfs_req)
|
|
|
|
+ goto err_req;
|
|
|
|
+
|
|
|
|
+ host->debugfs_pending_events
|
|
|
|
+ = debugfs_create_u32("pending_events", 0400, root,
|
|
|
|
+ (u32 *)&host->pending_events);
|
|
|
|
+ if (!host->debugfs_pending_events)
|
|
|
|
+ goto err_pending_events;
|
|
|
|
+
|
|
|
|
+ host->debugfs_completed_events
|
|
|
|
+ = debugfs_create_u32("completed_events", 0400, root,
|
|
|
|
+ (u32 *)&host->completed_events);
|
|
|
|
+ if (!host->debugfs_completed_events)
|
|
|
|
+ goto err_completed_events;
|
|
|
|
+
|
|
|
|
+ return;
|
|
|
|
+
|
|
|
|
+err_completed_events:
|
|
|
|
+ debugfs_remove(host->debugfs_pending_events);
|
|
|
|
+err_pending_events:
|
|
|
|
+ debugfs_remove(host->debugfs_req);
|
|
|
|
+err_req:
|
|
|
|
+ debugfs_remove(host->debugfs_regs);
|
|
|
|
+err_regs:
|
|
|
|
+ debugfs_remove(host->debugfs_root);
|
|
|
|
+err_root:
|
|
|
|
+ host->debugfs_root = NULL;
|
|
|
|
+ dev_err(&host->pdev->dev,
|
|
|
|
+ "failed to initialize debugfs for %s\n",
|
|
|
|
+ mmc_hostname(mmc));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_cleanup_debugfs(struct atmel_mci *host)
|
|
|
|
+{
|
|
|
|
+ if (host->debugfs_root) {
|
|
|
|
+ debugfs_remove(host->debugfs_completed_events);
|
|
|
|
+ debugfs_remove(host->debugfs_pending_events);
|
|
|
|
+ debugfs_remove(host->debugfs_req);
|
|
|
|
+ debugfs_remove(host->debugfs_regs);
|
|
|
|
+ debugfs_remove(host->debugfs_root);
|
|
|
|
+ host->debugfs_root = NULL;
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+#else
|
|
|
|
+static inline void atmci_init_debugfs(struct atmel_mci *host)
|
|
|
|
+{
|
|
|
|
+
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
|
|
|
|
+{
|
|
|
|
+
|
|
|
|
+}
|
|
|
|
+#endif /* CONFIG_DEBUG_FS */
|
|
|
|
+
|
|
|
|
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
|
|
|
|
+ unsigned int ns)
|
|
|
|
+{
|
|
|
|
+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_set_timeout(struct atmel_mci *host,
|
|
|
|
+ struct mmc_data *data)
|
|
|
|
+{
|
|
|
|
+ static unsigned dtomul_to_shift[] = {
|
|
|
|
+ 0, 4, 7, 8, 10, 12, 16, 20
|
|
|
|
+ };
|
|
|
|
+ unsigned timeout;
|
|
|
|
+ unsigned dtocyc, dtomul;
|
|
|
|
+
|
|
|
|
+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
|
|
|
|
+
|
|
|
|
+ for (dtomul = 0; dtomul < 8; dtomul++) {
|
|
|
|
+ unsigned shift = dtomul_to_shift[dtomul];
|
|
|
|
+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
|
|
|
|
+ if (dtocyc < 15)
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (dtomul >= 8) {
|
|
|
|
+ dtomul = 7;
|
|
|
|
+ dtocyc = 15;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
|
|
|
|
+ dtocyc << dtomul_to_shift[dtomul]);
|
|
|
|
+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
|
|
|
|
+ | MCI_BF(DTOCYC, dtocyc)));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Return mask with command flags to be enabled for this command.
|
|
|
|
+ */
|
|
|
|
+static u32 atmci_prepare_command(struct mmc_host *mmc,
|
|
|
|
+ struct mmc_command *cmd)
|
|
|
|
+{
|
|
|
|
+ u32 cmdr;
|
|
|
|
+
|
|
|
|
+ cmd->error = 0;
|
|
|
|
+
|
|
|
|
+ cmdr = MCI_BF(CMDNB, cmd->opcode);
|
|
|
|
+
|
|
|
|
+ if (cmd->flags & MMC_RSP_PRESENT) {
|
|
|
|
+ if (cmd->flags & MMC_RSP_136)
|
|
|
|
+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
|
|
|
|
+ else
|
|
|
|
+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
|
|
|
|
+ * it's too difficult to determine whether this is an ACMD or
|
|
|
|
+ * not. Better make it 64.
|
|
|
|
+ */
|
|
|
|
+ cmdr |= MCI_BIT(MAXLAT);
|
|
|
|
+
|
|
|
|
+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
|
|
+ cmdr |= MCI_BIT(OPDCMD);
|
|
|
|
+
|
|
|
|
+ dev_dbg(&mmc->class_dev,
|
|
|
|
+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
|
|
|
|
+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
|
|
|
|
+
|
|
|
|
+ return cmdr;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_start_command(struct atmel_mci *host,
|
|
|
|
+ struct mmc_command *cmd,
|
|
|
|
+ u32 cmd_flags)
|
|
|
|
+{
|
|
|
|
+ WARN_ON(host->cmd);
|
|
|
|
+ host->cmd = cmd;
|
|
|
|
+
|
|
|
|
+ mci_writel(host, ARGR, cmd->arg);
|
|
|
|
+ mci_writel(host, CMDR, cmd_flags);
|
|
|
|
+
|
|
|
|
+ if (cmd->data)
|
|
|
|
+ dma_start_request(host->dma.req.req.dmac,
|
|
|
|
+ host->dma.req.req.channel);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Returns a mask of flags to be set in the command register when the
|
|
|
|
+ * command to start the transfer is to be sent.
|
|
|
|
+ */
|
|
|
|
+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ u32 cmd_flags;
|
|
|
|
+
|
|
|
|
+ WARN_ON(host->data);
|
|
|
|
+ host->data = data;
|
|
|
|
+
|
|
|
|
+ atmci_set_timeout(host, data);
|
|
|
|
+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
|
|
|
|
+ | MCI_BF(BLKLEN, data->blksz)));
|
|
|
|
+ host->dma.req.block_size = data->blksz;
|
|
|
|
+ host->dma.req.nr_blocks = data->blocks;
|
|
|
|
+
|
|
|
|
+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
|
|
|
|
+ if (data->flags & MMC_DATA_STREAM)
|
|
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
|
|
|
|
+ else if (data->blocks > 1)
|
|
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
|
|
|
|
+ else
|
|
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
|
|
|
|
+
|
|
|
|
+ if (data->flags & MMC_DATA_READ) {
|
|
|
|
+ cmd_flags |= MCI_BIT(TRDIR);
|
|
|
|
+ host->dma.req.nr_sg
|
|
|
|
+ = dma_map_sg(&host->pdev->dev, data->sg,
|
|
|
|
+ data->sg_len, DMA_FROM_DEVICE);
|
|
|
|
+ host->dma.req.periph_id = host->dma.rx_periph_id;
|
|
|
|
+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
|
|
|
|
+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
|
|
|
|
+ } else {
|
|
|
|
+ host->dma.req.nr_sg
|
|
|
|
+ = dma_map_sg(&host->pdev->dev, data->sg,
|
|
|
|
+ data->sg_len, DMA_TO_DEVICE);
|
|
|
|
+ host->dma.req.periph_id = host->dma.tx_periph_id;
|
|
|
|
+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
|
|
+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
|
|
|
|
+ }
|
|
|
|
+ host->dma.req.sg = data->sg;
|
|
|
|
+
|
|
|
|
+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
|
|
|
|
+
|
|
|
|
+ return cmd_flags;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ struct mmc_data *data = mrq->data;
|
|
|
|
+ u32 iflags;
|
|
|
|
+ u32 cmdflags = 0;
|
|
|
|
+
|
|
|
|
+ iflags = mci_readl(host, IMR);
|
|
|
|
+ if (iflags)
|
|
|
|
+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
|
|
|
|
+ mci_readl(host, IMR));
|
|
|
|
+
|
|
|
|
+ WARN_ON(host->mrq != NULL);
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * We may "know" the card is gone even though there's still an
|
|
|
|
+ * electrical connection. If so, we really need to communicate
|
|
|
|
+ * this to the MMC core since there won't be any more
|
|
|
|
+ * interrupts as the card is completely removed. Otherwise,
|
|
|
|
+ * the MMC core might believe the card is still there even
|
|
|
|
+ * though the card was just removed very slowly.
|
|
|
|
+ */
|
|
|
|
+ if (!host->present) {
|
|
|
|
+ mrq->cmd->error = -ENOMEDIUM;
|
|
|
|
+ mmc_request_done(mmc, mrq);
|
|
|
|
+ return;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ host->mrq = mrq;
|
|
|
|
+ host->pending_events = 0;
|
|
|
|
+ host->completed_events = 0;
|
|
|
|
+
|
|
|
|
+ iflags = MCI_BIT(CMDRDY);
|
|
|
|
+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
|
|
|
|
+
|
|
|
|
+ if (mrq->stop) {
|
|
|
|
+ WARN_ON(!data);
|
|
|
|
+
|
|
|
|
+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
|
|
|
|
+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
|
|
|
|
+ if (!(data->flags & MMC_DATA_WRITE))
|
|
|
|
+ host->stop_cmdr |= MCI_BIT(TRDIR);
|
|
|
|
+ if (data->flags & MMC_DATA_STREAM)
|
|
|
|
+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
|
|
|
|
+ else
|
|
|
|
+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
|
|
|
|
+ }
|
|
|
|
+ if (data) {
|
|
|
|
+ cmdflags |= atmci_prepare_data(mmc, data);
|
|
|
|
+ iflags |= MCI_DATA_ERROR_FLAGS;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ atmci_start_command(host, mrq->cmd, cmdflags);
|
|
|
|
+ mci_writel(host, IER, iflags);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ u32 mr;
|
|
|
|
+
|
|
|
|
+ if (ios->clock) {
|
|
|
|
+ u32 clkdiv;
|
|
|
|
+
|
|
|
|
+ /* Set clock rate */
|
|
|
|
+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
|
|
|
|
+ if (clkdiv > 255) {
|
|
|
|
+ dev_warn(&mmc->class_dev,
|
|
|
|
+ "clock %u too slow; using %lu\n",
|
|
|
|
+ ios->clock, host->bus_hz / (2 * 256));
|
|
|
|
+ clkdiv = 255;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mr = mci_readl(host, MR);
|
|
|
|
+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
|
|
|
|
+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
|
|
|
|
+ mci_writel(host, MR, mr);
|
|
|
|
+
|
|
|
|
+ /* Enable the MCI controller */
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(MCIEN));
|
|
|
|
+ } else {
|
|
|
|
+ /* Disable the MCI controller */
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(MCIDIS));
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ switch (ios->bus_width) {
|
|
|
|
+ case MMC_BUS_WIDTH_1:
|
|
|
|
+ mci_writel(host, SDCR, 0);
|
|
|
|
+ break;
|
|
|
|
+ case MMC_BUS_WIDTH_4:
|
|
|
|
+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ switch (ios->power_mode) {
|
|
|
|
+ case MMC_POWER_ON:
|
|
|
|
+ /* Send init sequence (74 clock cycles) */
|
|
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
|
|
+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
|
|
|
|
+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
|
|
|
|
+ cpu_relax();
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ /*
|
|
|
|
+ * TODO: None of the currently available AVR32-based
|
|
|
|
+ * boards allow MMC power to be turned off. Implement
|
|
|
|
+ * power control when this can be tested properly.
|
|
|
|
+ */
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int atmci_get_ro(struct mmc_host *mmc)
|
|
|
|
+{
|
|
|
|
+ int read_only = 0;
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+
|
|
|
|
+ if (host->wp_pin >= 0) {
|
|
|
|
+ read_only = gpio_get_value(host->wp_pin);
|
|
|
|
+ dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
|
|
+ read_only ? "read-only" : "read-write");
|
|
|
|
+ } else {
|
|
|
|
+ dev_dbg(&mmc->class_dev,
|
|
|
|
+ "no pin for checking read-only switch."
|
|
|
|
+ " Assuming write-enable.\n");
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return read_only;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct mmc_host_ops atmci_ops = {
|
|
|
|
+ .request = atmci_request,
|
|
|
|
+ .set_ios = atmci_set_ios,
|
|
|
|
+ .get_ro = atmci_get_ro,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+
|
|
|
|
+ WARN_ON(host->cmd || host->data);
|
|
|
|
+ host->mrq = NULL;
|
|
|
|
+
|
|
|
|
+ mmc_request_done(mmc, mrq);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
|
|
|
|
+ u32 flags)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+
|
|
|
|
+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
|
|
|
|
+ mci_writel(host, IER, MCI_BIT(CMDRDY));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
|
|
|
|
+{
|
|
|
|
+ host->data = NULL;
|
|
|
|
+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
|
|
|
|
+ ((data->flags & MMC_DATA_WRITE)
|
|
|
|
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * Data might complete before command for very short transfers
|
|
|
|
+ * (like READ_SCR)
|
|
|
|
+ */
|
|
|
|
+ if (mci_cmd_is_complete(host)
|
|
|
|
+ && (!data->stop || mci_stop_is_complete(host)))
|
|
|
|
+ atmci_request_end(host->mmc, data->mrq);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_command_complete(struct atmel_mci *host,
|
|
|
|
+ struct mmc_command *cmd, u32 status)
|
|
|
|
+{
|
|
|
|
+ if (status & MCI_BIT(RTOE))
|
|
|
|
+ cmd->error = -ETIMEDOUT;
|
|
|
|
+ else if ((cmd->flags & MMC_RSP_CRC)
|
|
|
|
+ && (status & MCI_BIT(RCRCE)))
|
|
|
|
+ cmd->error = -EILSEQ;
|
|
|
|
+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
|
|
|
|
+ cmd->error = -EIO;
|
|
|
|
+
|
|
|
|
+ if (cmd->error) {
|
|
|
|
+ dev_dbg(&host->mmc->class_dev,
|
|
|
|
+ "command error: op=0x%x status=0x%08x\n",
|
|
|
|
+ cmd->opcode, status);
|
|
|
|
+
|
|
|
|
+ if (cmd->data) {
|
|
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
|
|
+ host->dma.req.req.channel);
|
|
|
|
+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
|
|
|
|
+ | MCI_DATA_ERROR_FLAGS);
|
|
|
|
+ host->data = NULL;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_detect_change(unsigned long data)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = (struct atmel_mci *)data;
|
|
|
|
+ struct mmc_request *mrq = host->mrq;
|
|
|
|
+ int present;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * atmci_remove() sets detect_pin to -1 before freeing the
|
|
|
|
+ * interrupt. We must not re-enable the interrupt if it has
|
|
|
|
+ * been freed.
|
|
|
|
+ */
|
|
|
|
+ smp_rmb();
|
|
|
|
+ if (host->detect_pin < 0)
|
|
|
|
+ return;
|
|
|
|
+
|
|
|
|
+ enable_irq(gpio_to_irq(host->detect_pin));
|
|
|
|
+ present = !gpio_get_value(host->detect_pin);
|
|
|
|
+
|
|
|
|
+ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
|
|
|
|
+ present, host->present);
|
|
|
|
+
|
|
|
|
+ if (present != host->present) {
|
|
|
|
+ dev_dbg(&host->mmc->class_dev, "card %s\n",
|
|
|
|
+ present ? "inserted" : "removed");
|
|
|
|
+ host->present = present;
|
|
|
|
+
|
|
|
|
+ /* Reset controller if card is gone */
|
|
|
|
+ if (!present) {
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(SWRST));
|
|
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(MCIEN));
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* Clean up queue if present */
|
|
|
|
+ if (mrq) {
|
|
|
|
+ if (!mci_cmd_is_complete(host))
|
|
|
|
+ mrq->cmd->error = -ENOMEDIUM;
|
|
|
|
+ if (mrq->data && !mci_data_is_complete(host)
|
|
|
|
+ && !mci_data_error_is_complete(host)) {
|
|
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
|
|
+ host->dma.req.req.channel);
|
|
|
|
+ host->data->error = -ENOMEDIUM;
|
|
|
|
+ atmci_data_complete(host, host->data);
|
|
|
|
+ }
|
|
|
|
+ if (mrq->stop && !mci_stop_is_complete(host))
|
|
|
|
+ mrq->stop->error = -ENOMEDIUM;
|
|
|
|
+
|
|
|
|
+ host->cmd = NULL;
|
|
|
|
+ atmci_request_end(host->mmc, mrq);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mmc_detect_change(host->mmc, 0);
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_tasklet_func(unsigned long priv)
|
|
|
|
+{
|
|
|
|
+ struct mmc_host *mmc = (struct mmc_host *)priv;
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ struct mmc_request *mrq = host->mrq;
|
|
|
|
+ struct mmc_data *data = host->data;
|
|
|
|
+
|
|
|
|
+ dev_vdbg(&mmc->class_dev,
|
|
|
|
+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
|
|
|
|
+ host->pending_events, host->completed_events,
|
|
|
|
+ mci_readl(host, IMR));
|
|
|
|
+
|
|
|
|
+ if (mci_clear_cmd_is_pending(host)) {
|
|
|
|
+ mci_set_cmd_complete(host);
|
|
|
|
+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
|
|
|
|
+ if (!host->data || mci_data_is_complete(host)
|
|
|
|
+ || mci_data_error_is_complete(host))
|
|
|
|
+ atmci_request_end(mmc, mrq);
|
|
|
|
+ }
|
|
|
|
+ if (mci_clear_stop_is_pending(host)) {
|
|
|
|
+ mci_set_stop_complete(host);
|
|
|
|
+ atmci_command_complete(host, mrq->stop, host->stop_status);
|
|
|
|
+ if (mci_data_is_complete(host)
|
|
|
|
+ || mci_data_error_is_complete(host))
|
|
|
|
+ atmci_request_end(mmc, mrq);
|
|
|
|
+ }
|
|
|
|
+ if (mci_clear_dma_error_is_pending(host)) {
|
|
|
|
+ mci_set_dma_error_complete(host);
|
|
|
|
+ mci_clear_data_pending(host);
|
|
|
|
+
|
|
|
|
+ /* DMA controller got bus error => invalid address */
|
|
|
|
+ data->error = -EIO;
|
|
|
|
+
|
|
|
|
+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
|
|
|
|
+ host->data->bytes_xfered);
|
|
|
|
+
|
|
|
|
+ if (data->stop
|
|
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
|
|
+ /* TODO: Check if card is still present */
|
|
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
|
|
+
|
|
|
|
+ atmci_data_complete(host, data);
|
|
|
|
+ }
|
|
|
|
+ if (mci_clear_data_error_is_pending(host)) {
|
|
|
|
+ u32 status = host->data_status;
|
|
|
|
+
|
|
|
|
+ mci_set_data_error_complete(host);
|
|
|
|
+ mci_clear_data_pending(host);
|
|
|
|
+
|
|
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
|
|
+ host->dma.req.req.channel);
|
|
|
|
+
|
|
|
|
+ if (status & MCI_BIT(DCRCE)) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "data CRC error\n");
|
|
|
|
+ data->error = -EILSEQ;
|
|
|
|
+ } else if (status & MCI_BIT(DTOE)) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "data timeout error\n");
|
|
|
|
+ data->error = -ETIMEDOUT;
|
|
|
|
+ } else {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
|
|
|
|
+ data->error = -EIO;
|
|
|
|
+ }
|
|
|
|
+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
|
|
|
|
+ data->bytes_xfered);
|
|
|
|
+
|
|
|
|
+ if (data->stop
|
|
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
|
|
+ /* TODO: Check if card is still present */
|
|
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
|
|
+
|
|
|
|
+ atmci_data_complete(host, data);
|
|
|
|
+ }
|
|
|
|
+ if (mci_clear_data_is_pending(host)) {
|
|
|
|
+ mci_set_data_complete(host);
|
|
|
|
+ data->bytes_xfered = data->blocks * data->blksz;
|
|
|
|
+ atmci_data_complete(host, data);
|
|
|
|
+ }
|
2008-07-05 17:49:07 +03:00
|
|
|
+ /* See if there is a pending STOP which can be sent */
|
|
|
|
+ if (host->pending_stop && mci_cmd_is_complete(host)) {
|
|
|
|
+ host->pending_stop = 0;
|
|
|
|
+ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
|
|
|
|
+ send_stop_cmd(host->mmc, mrq->data, 0);
|
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ struct mmc_command *cmd = host->cmd;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * Read the response now so that we're free to send a new
|
|
|
|
+ * command immediately.
|
|
|
|
+ */
|
|
|
|
+ cmd->resp[0] = mci_readl(host, RSPR);
|
|
|
|
+ cmd->resp[1] = mci_readl(host, RSPR);
|
|
|
|
+ cmd->resp[2] = mci_readl(host, RSPR);
|
|
|
|
+ cmd->resp[3] = mci_readl(host, RSPR);
|
|
|
|
+
|
|
|
|
+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
|
|
|
|
+ host->cmd = NULL;
|
|
|
|
+
|
|
|
|
+ if (mci_stop_sent_is_complete(host)) {
|
|
|
|
+ host->stop_status = status;
|
|
|
|
+ mci_set_stop_pending(host);
|
|
|
|
+ } else {
|
|
|
|
+ struct mmc_request *mrq = host->mrq;
|
|
|
|
+
|
|
|
|
+ if (mrq->stop && mci_dma_is_complete(host)
|
|
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
|
|
+ send_stop_cmd(host->mmc, mrq->data, 0);
|
|
|
|
+ host->cmd_status = status;
|
|
|
|
+ mci_set_cmd_pending(host);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ tasklet_schedule(&host->tasklet);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_xfer_complete(struct dma_request *_req)
|
|
|
|
+{
|
|
|
|
+ struct dma_request_sg *req = to_dma_request_sg(_req);
|
|
|
|
+ struct atmel_mci_dma *dma;
|
|
|
|
+ struct atmel_mci *host;
|
|
|
|
+ struct mmc_data *data;
|
|
|
|
+
|
|
|
|
+ dma = container_of(req, struct atmel_mci_dma, req);
|
|
|
|
+ host = container_of(dma, struct atmel_mci, dma);
|
|
|
|
+ data = host->data;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * This callback may be called before we see the CMDRDY
|
|
|
|
+ * interrupt under heavy irq load (possibly caused by other
|
|
|
|
+ * drivers) or when interrupts are disabled for a long time.
|
|
|
|
+ */
|
|
|
|
+ mci_set_dma_complete(host);
|
2008-07-05 17:49:07 +03:00
|
|
|
+
|
|
|
|
+ if (data->stop) {
|
|
|
|
+ if (!mci_cmd_is_complete(host)) {
|
|
|
|
+ /* Just remember a STOP must be sent */
|
|
|
|
+ host->pending_stop = 1;
|
|
|
|
+ } else if (!mci_set_stop_sent_is_completed(host)) {
|
|
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
|
|
+ host->pending_stop = 0;
|
|
|
|
+ }
|
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * Regardless of what the documentation says, we have to wait
|
|
|
|
+ * for NOTBUSY even after block read operations.
|
|
|
|
+ *
|
|
|
|
+ * When the DMA transfer is complete, the controller may still
|
|
|
|
+ * be reading the CRC from the card, i.e. the data transfer is
|
|
|
|
+ * still in progress and we haven't seen all the potential
|
|
|
|
+ * error bits yet.
|
|
|
|
+ */
|
|
|
|
+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmci_dma_error(struct dma_request *_req)
|
|
|
|
+{
|
|
|
|
+ struct dma_request_sg *req = to_dma_request_sg(_req);
|
|
|
|
+ struct atmel_mci_dma *dma;
|
|
|
|
+ struct atmel_mci *host;
|
|
|
|
+
|
|
|
|
+ dma = container_of(req, struct atmel_mci_dma, req);
|
|
|
|
+ host = container_of(dma, struct atmel_mci, dma);
|
|
|
|
+
|
|
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
|
|
+
|
|
|
|
+ mci_set_dma_error_pending(host);
|
|
|
|
+ tasklet_schedule(&host->tasklet);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
|
|
|
|
+{
|
|
|
|
+ struct mmc_host *mmc = dev_id;
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+ u32 status, mask, pending;
|
|
|
|
+
|
|
|
|
+ spin_lock(&mmc->lock);
|
|
|
|
+
|
|
|
|
+ status = mci_readl(host, SR);
|
|
|
|
+ mask = mci_readl(host, IMR);
|
|
|
|
+ pending = status & mask;
|
|
|
|
+
|
|
|
|
+ do {
|
|
|
|
+ if (pending & MCI_DATA_ERROR_FLAGS) {
|
|
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
|
|
+ host->data_status = status;
|
|
|
|
+ mci_set_data_error_pending(host);
|
|
|
|
+ tasklet_schedule(&host->tasklet);
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ if (pending & MCI_BIT(CMDRDY))
|
|
|
|
+ atmci_cmd_interrupt(mmc, status);
|
|
|
|
+ if (pending & MCI_BIT(NOTBUSY)) {
|
|
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
|
|
+ mci_set_data_pending(host);
|
|
|
|
+ tasklet_schedule(&host->tasklet);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ status = mci_readl(host, SR);
|
|
|
|
+ mask = mci_readl(host, IMR);
|
|
|
|
+ pending = status & mask;
|
|
|
|
+ } while (pending);
|
|
|
|
+
|
|
|
|
+ spin_unlock(&mmc->lock);
|
|
|
|
+
|
|
|
|
+ return IRQ_HANDLED;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
|
|
|
|
+{
|
|
|
|
+ struct mmc_host *mmc = dev_id;
|
|
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * Disable interrupts until the pin has stabilized and check
|
|
|
|
+ * the state then. Use mod_timer() since we may be in the
|
|
|
|
+ * middle of the timer routine when this interrupt triggers.
|
|
|
|
+ */
|
|
|
|
+ disable_irq_nosync(irq);
|
|
|
|
+ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
|
|
|
|
+
|
|
|
|
+ return IRQ_HANDLED;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int __devinit atmci_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct mci_platform_data *board;
|
|
|
|
+ struct atmel_mci *host;
|
|
|
|
+ struct mmc_host *mmc;
|
|
|
|
+ struct resource *regs;
|
|
|
|
+ int irq;
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs)
|
|
|
|
+ return -ENXIO;
|
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ if (irq < 0)
|
|
|
|
+ return irq;
|
|
|
|
+
|
|
|
|
+ board = pdev->dev.platform_data;
|
|
|
|
+
|
|
|
|
+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
|
|
|
|
+ if (!mmc)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+
|
|
|
|
+ host = mmc_priv(mmc);
|
|
|
|
+ host->pdev = pdev;
|
|
|
|
+ host->mmc = mmc;
|
|
|
|
+ if (board) {
|
|
|
|
+ host->detect_pin = board->detect_pin;
|
|
|
|
+ host->wp_pin = board->wp_pin;
|
|
|
|
+ } else {
|
|
|
|
+ host->detect_pin = -1;
|
|
|
|
+ host->wp_pin = -1;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ host->mck = clk_get(&pdev->dev, "mci_clk");
|
|
|
|
+ if (IS_ERR(host->mck)) {
|
|
|
|
+ ret = PTR_ERR(host->mck);
|
|
|
|
+ goto out_free_host;
|
|
|
|
+ }
|
|
|
|
+ clk_enable(host->mck);
|
|
|
|
+
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!host->regs)
|
|
|
|
+ goto out_disable_clk;
|
|
|
|
+
|
|
|
|
+ host->bus_hz = clk_get_rate(host->mck);
|
|
|
|
+ host->mapbase = regs->start;
|
|
|
|
+
|
|
|
|
+ mmc->ops = &atmci_ops;
|
|
|
|
+ mmc->f_min = (host->bus_hz + 511) / 512;
|
|
|
|
+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
|
|
|
|
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
+
|
|
|
|
+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
|
|
|
|
+
|
|
|
|
+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out_unmap;
|
|
|
|
+
|
|
|
|
+ /* Assume card is present if we don't have a detect pin */
|
|
|
|
+ host->present = 1;
|
|
|
|
+ if (host->detect_pin >= 0) {
|
|
|
|
+ if (gpio_request(host->detect_pin, "mmc_detect")) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
|
|
|
|
+ host->detect_pin = -1;
|
|
|
|
+ } else {
|
|
|
|
+ host->present = !gpio_get_value(host->detect_pin);
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+ if (host->wp_pin >= 0) {
|
|
|
|
+ if (gpio_request(host->wp_pin, "mmc_wp")) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
|
|
|
|
+ host->wp_pin = -1;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* TODO: Get this information from platform data */
|
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ host->dma.req.req.dmac = find_dma_controller(0);
|
|
|
|
+ if (!host->dma.req.req.dmac) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
|
|
|
|
+ goto out_free_irq;
|
|
|
|
+ }
|
|
|
|
+ ret = dma_alloc_channel(host->dma.req.req.dmac);
|
|
|
|
+ if (ret < 0) {
|
|
|
|
+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
|
|
|
|
+ goto out_free_irq;
|
|
|
|
+ }
|
|
|
|
+ host->dma.req.req.channel = ret;
|
|
|
|
+ host->dma.req.width = DMA_WIDTH_32BIT;
|
|
|
|
+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
|
|
|
|
+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
|
|
|
|
+ host->dma.req.req.error = atmci_dma_error;
|
|
|
|
+ host->dma.rx_periph_id = 0;
|
|
|
|
+ host->dma.tx_periph_id = 1;
|
|
|
|
+
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(SWRST));
|
|
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
|
|
+
|
|
|
|
+ platform_set_drvdata(pdev, host);
|
|
|
|
+
|
|
|
|
+ mmc_add_host(mmc);
|
|
|
|
+
|
|
|
|
+ if (host->detect_pin >= 0) {
|
|
|
|
+ setup_timer(&host->detect_timer, atmci_detect_change,
|
|
|
|
+ (unsigned long)host);
|
|
|
|
+
|
|
|
|
+ ret = request_irq(gpio_to_irq(host->detect_pin),
|
|
|
|
+ atmci_detect_interrupt,
|
|
|
|
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
|
|
+ DRIVER_NAME, mmc);
|
|
|
|
+ if (ret) {
|
|
|
|
+ dev_dbg(&mmc->class_dev,
|
|
|
|
+ "could not request IRQ %d for detect pin\n",
|
|
|
|
+ gpio_to_irq(host->detect_pin));
|
|
|
|
+ gpio_free(host->detect_pin);
|
|
|
|
+ host->detect_pin = -1;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
|
|
|
|
+ host->mapbase, irq);
|
|
|
|
+
|
|
|
|
+ atmci_init_debugfs(host);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+out_free_irq:
|
|
|
|
+ if (host->detect_pin >= 0)
|
|
|
|
+ gpio_free(host->detect_pin);
|
|
|
|
+ if (host->wp_pin >= 0)
|
|
|
|
+ gpio_free(host->wp_pin);
|
|
|
|
+ free_irq(irq, mmc);
|
|
|
|
+out_unmap:
|
|
|
|
+ iounmap(host->regs);
|
|
|
|
+out_disable_clk:
|
|
|
|
+ clk_disable(host->mck);
|
|
|
|
+ clk_put(host->mck);
|
|
|
|
+out_free_host:
|
|
|
|
+ mmc_free_host(mmc);
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int __devexit atmci_remove(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct atmel_mci *host = platform_get_drvdata(pdev);
|
|
|
|
+
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+
|
|
|
|
+ if (host) {
|
|
|
|
+ atmci_cleanup_debugfs(host);
|
|
|
|
+
|
|
|
|
+ if (host->detect_pin >= 0) {
|
|
|
|
+ int pin = host->detect_pin;
|
|
|
|
+
|
|
|
|
+ /* Make sure our timer doesn't enable the interrupt */
|
|
|
|
+ host->detect_pin = -1;
|
|
|
|
+ smp_wmb();
|
|
|
|
+
|
|
|
|
+ free_irq(gpio_to_irq(pin), host->mmc);
|
|
|
|
+ del_timer_sync(&host->detect_timer);
|
|
|
|
+ cancel_delayed_work(&host->mmc->detect);
|
|
|
|
+ gpio_free(pin);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mmc_remove_host(host->mmc);
|
|
|
|
+
|
|
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
|
|
+ mci_writel(host, CR, MCI_BIT(MCIDIS));
|
|
|
|
+ mci_readl(host, SR);
|
|
|
|
+
|
|
|
|
+ dma_release_channel(host->dma.req.req.dmac,
|
|
|
|
+ host->dma.req.req.channel);
|
|
|
|
+
|
|
|
|
+ if (host->wp_pin >= 0)
|
|
|
|
+ gpio_free(host->wp_pin);
|
|
|
|
+
|
|
|
|
+ free_irq(platform_get_irq(pdev, 0), host->mmc);
|
|
|
|
+ iounmap(host->regs);
|
|
|
|
+
|
|
|
|
+ clk_disable(host->mck);
|
|
|
|
+ clk_put(host->mck);
|
|
|
|
+
|
|
|
|
+ mmc_free_host(host->mmc);
|
|
|
|
+ }
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct platform_driver atmci_driver = {
|
|
|
|
+ .probe = atmci_probe,
|
|
|
|
+ .remove = __devexit_p(atmci_remove),
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = DRIVER_NAME,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init atmci_init(void)
|
|
|
|
+{
|
|
|
|
+ return platform_driver_register(&atmci_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit atmci_exit(void)
|
|
|
|
+{
|
|
|
|
+ platform_driver_unregister(&atmci_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+module_init(atmci_init);
|
|
|
|
+module_exit(atmci_exit);
|
|
|
|
+
|
|
|
|
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
|
|
|
|
+MODULE_LICENSE("GPL");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/mmc/host/atmel-mci.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,192 @@
|
|
|
|
+/*
|
|
|
|
+ * Atmel MultiMedia Card Interface driver
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2004-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
|
|
|
|
+#define __DRIVERS_MMC_ATMEL_MCI_H__
|
|
|
|
+
|
|
|
|
+/* MCI register offsets */
|
|
|
|
+#define MCI_CR 0x0000
|
|
|
|
+#define MCI_MR 0x0004
|
|
|
|
+#define MCI_DTOR 0x0008
|
|
|
|
+#define MCI_SDCR 0x000c
|
|
|
|
+#define MCI_ARGR 0x0010
|
|
|
|
+#define MCI_CMDR 0x0014
|
|
|
|
+#define MCI_BLKR 0x0018
|
|
|
|
+#define MCI_RSPR 0x0020
|
|
|
|
+#define MCI_RSPR1 0x0024
|
|
|
|
+#define MCI_RSPR2 0x0028
|
|
|
|
+#define MCI_RSPR3 0x002c
|
|
|
|
+#define MCI_RDR 0x0030
|
|
|
|
+#define MCI_TDR 0x0034
|
|
|
|
+#define MCI_SR 0x0040
|
|
|
|
+#define MCI_IER 0x0044
|
|
|
|
+#define MCI_IDR 0x0048
|
|
|
|
+#define MCI_IMR 0x004c
|
|
|
|
+
|
|
|
|
+/* Bitfields in CR */
|
|
|
|
+#define MCI_MCIEN_OFFSET 0
|
|
|
|
+#define MCI_MCIEN_SIZE 1
|
|
|
|
+#define MCI_MCIDIS_OFFSET 1
|
|
|
|
+#define MCI_MCIDIS_SIZE 1
|
|
|
|
+#define MCI_PWSEN_OFFSET 2
|
|
|
|
+#define MCI_PWSEN_SIZE 1
|
|
|
|
+#define MCI_PWSDIS_OFFSET 3
|
|
|
|
+#define MCI_PWSDIS_SIZE 1
|
|
|
|
+#define MCI_SWRST_OFFSET 7
|
|
|
|
+#define MCI_SWRST_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in MR */
|
|
|
|
+#define MCI_CLKDIV_OFFSET 0
|
|
|
|
+#define MCI_CLKDIV_SIZE 8
|
|
|
|
+#define MCI_PWSDIV_OFFSET 8
|
|
|
|
+#define MCI_PWSDIV_SIZE 3
|
|
|
|
+#define MCI_RDPROOF_OFFSET 11
|
|
|
|
+#define MCI_RDPROOF_SIZE 1
|
|
|
|
+#define MCI_WRPROOF_OFFSET 12
|
|
|
|
+#define MCI_WRPROOF_SIZE 1
|
|
|
|
+#define MCI_DMAPADV_OFFSET 14
|
|
|
|
+#define MCI_DMAPADV_SIZE 1
|
|
|
|
+#define MCI_BLKLEN_OFFSET 16
|
|
|
|
+#define MCI_BLKLEN_SIZE 16
|
|
|
|
+
|
|
|
|
+/* Bitfields in DTOR */
|
|
|
|
+#define MCI_DTOCYC_OFFSET 0
|
|
|
|
+#define MCI_DTOCYC_SIZE 4
|
|
|
|
+#define MCI_DTOMUL_OFFSET 4
|
|
|
|
+#define MCI_DTOMUL_SIZE 3
|
|
|
|
+
|
|
|
|
+/* Bitfields in SDCR */
|
|
|
|
+#define MCI_SDCSEL_OFFSET 0
|
|
|
|
+#define MCI_SDCSEL_SIZE 4
|
|
|
|
+#define MCI_SDCBUS_OFFSET 7
|
|
|
|
+#define MCI_SDCBUS_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in ARGR */
|
|
|
|
+#define MCI_ARG_OFFSET 0
|
|
|
|
+#define MCI_ARG_SIZE 32
|
|
|
|
+
|
|
|
|
+/* Bitfields in CMDR */
|
|
|
|
+#define MCI_CMDNB_OFFSET 0
|
|
|
|
+#define MCI_CMDNB_SIZE 6
|
|
|
|
+#define MCI_RSPTYP_OFFSET 6
|
|
|
|
+#define MCI_RSPTYP_SIZE 2
|
|
|
|
+#define MCI_SPCMD_OFFSET 8
|
|
|
|
+#define MCI_SPCMD_SIZE 3
|
|
|
|
+#define MCI_OPDCMD_OFFSET 11
|
|
|
|
+#define MCI_OPDCMD_SIZE 1
|
|
|
|
+#define MCI_MAXLAT_OFFSET 12
|
|
|
|
+#define MCI_MAXLAT_SIZE 1
|
|
|
|
+#define MCI_TRCMD_OFFSET 16
|
|
|
|
+#define MCI_TRCMD_SIZE 2
|
|
|
|
+#define MCI_TRDIR_OFFSET 18
|
|
|
|
+#define MCI_TRDIR_SIZE 1
|
|
|
|
+#define MCI_TRTYP_OFFSET 19
|
|
|
|
+#define MCI_TRTYP_SIZE 2
|
|
|
|
+
|
|
|
|
+/* Bitfields in BLKR */
|
|
|
|
+#define MCI_BCNT_OFFSET 0
|
|
|
|
+#define MCI_BCNT_SIZE 16
|
|
|
|
+
|
|
|
|
+/* Bitfields in RSPRn */
|
|
|
|
+#define MCI_RSP_OFFSET 0
|
|
|
|
+#define MCI_RSP_SIZE 32
|
|
|
|
+
|
|
|
|
+/* Bitfields in SR/IER/IDR/IMR */
|
|
|
|
+#define MCI_CMDRDY_OFFSET 0
|
|
|
|
+#define MCI_CMDRDY_SIZE 1
|
|
|
|
+#define MCI_RXRDY_OFFSET 1
|
|
|
|
+#define MCI_RXRDY_SIZE 1
|
|
|
|
+#define MCI_TXRDY_OFFSET 2
|
|
|
|
+#define MCI_TXRDY_SIZE 1
|
|
|
|
+#define MCI_BLKE_OFFSET 3
|
|
|
|
+#define MCI_BLKE_SIZE 1
|
|
|
|
+#define MCI_DTIP_OFFSET 4
|
|
|
|
+#define MCI_DTIP_SIZE 1
|
|
|
|
+#define MCI_NOTBUSY_OFFSET 5
|
|
|
|
+#define MCI_NOTBUSY_SIZE 1
|
|
|
|
+#define MCI_ENDRX_OFFSET 6
|
|
|
|
+#define MCI_ENDRX_SIZE 1
|
|
|
|
+#define MCI_ENDTX_OFFSET 7
|
|
|
|
+#define MCI_ENDTX_SIZE 1
|
|
|
|
+#define MCI_RXBUFF_OFFSET 14
|
|
|
|
+#define MCI_RXBUFF_SIZE 1
|
|
|
|
+#define MCI_TXBUFE_OFFSET 15
|
|
|
|
+#define MCI_TXBUFE_SIZE 1
|
|
|
|
+#define MCI_RINDE_OFFSET 16
|
|
|
|
+#define MCI_RINDE_SIZE 1
|
|
|
|
+#define MCI_RDIRE_OFFSET 17
|
|
|
|
+#define MCI_RDIRE_SIZE 1
|
|
|
|
+#define MCI_RCRCE_OFFSET 18
|
|
|
|
+#define MCI_RCRCE_SIZE 1
|
|
|
|
+#define MCI_RENDE_OFFSET 19
|
|
|
|
+#define MCI_RENDE_SIZE 1
|
|
|
|
+#define MCI_RTOE_OFFSET 20
|
|
|
|
+#define MCI_RTOE_SIZE 1
|
|
|
|
+#define MCI_DCRCE_OFFSET 21
|
|
|
|
+#define MCI_DCRCE_SIZE 1
|
|
|
|
+#define MCI_DTOE_OFFSET 22
|
|
|
|
+#define MCI_DTOE_SIZE 1
|
|
|
|
+#define MCI_OVRE_OFFSET 30
|
|
|
|
+#define MCI_OVRE_SIZE 1
|
|
|
|
+#define MCI_UNRE_OFFSET 31
|
|
|
|
+#define MCI_UNRE_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Constants for DTOMUL */
|
|
|
|
+#define MCI_DTOMUL_1_CYCLE 0
|
|
|
|
+#define MCI_DTOMUL_16_CYCLES 1
|
|
|
|
+#define MCI_DTOMUL_128_CYCLES 2
|
|
|
|
+#define MCI_DTOMUL_256_CYCLES 3
|
|
|
|
+#define MCI_DTOMUL_1024_CYCLES 4
|
|
|
|
+#define MCI_DTOMUL_4096_CYCLES 5
|
|
|
|
+#define MCI_DTOMUL_65536_CYCLES 6
|
|
|
|
+#define MCI_DTOMUL_1048576_CYCLES 7
|
|
|
|
+
|
|
|
|
+/* Constants for RSPTYP */
|
|
|
|
+#define MCI_RSPTYP_NO_RESP 0
|
|
|
|
+#define MCI_RSPTYP_48_BIT 1
|
|
|
|
+#define MCI_RSPTYP_136_BIT 2
|
|
|
|
+
|
|
|
|
+/* Constants for SPCMD */
|
|
|
|
+#define MCI_SPCMD_NO_SPEC_CMD 0
|
|
|
|
+#define MCI_SPCMD_INIT_CMD 1
|
|
|
|
+#define MCI_SPCMD_SYNC_CMD 2
|
|
|
|
+#define MCI_SPCMD_INT_CMD 4
|
|
|
|
+#define MCI_SPCMD_INT_RESP 5
|
|
|
|
+
|
|
|
|
+/* Constants for TRCMD */
|
|
|
|
+#define MCI_TRCMD_NO_TRANS 0
|
|
|
|
+#define MCI_TRCMD_START_TRANS 1
|
|
|
|
+#define MCI_TRCMD_STOP_TRANS 2
|
|
|
|
+
|
|
|
|
+/* Constants for TRTYP */
|
|
|
|
+#define MCI_TRTYP_BLOCK 0
|
|
|
|
+#define MCI_TRTYP_MULTI_BLOCK 1
|
|
|
|
+#define MCI_TRTYP_STREAM 2
|
|
|
|
+
|
|
|
|
+/* Bit manipulation macros */
|
|
|
|
+#define MCI_BIT(name) \
|
|
|
|
+ (1 << MCI_##name##_OFFSET)
|
|
|
|
+#define MCI_BF(name,value) \
|
|
|
|
+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
|
|
|
|
+ << MCI_##name##_OFFSET)
|
|
|
|
+#define MCI_BFEXT(name,value) \
|
|
|
|
+ (((value) >> MCI_##name##_OFFSET) \
|
|
|
|
+ & ((1 << MCI_##name##_SIZE) - 1))
|
|
|
|
+#define MCI_BFINS(name,value,old) \
|
|
|
|
+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
|
|
|
|
+ << MCI_##name##_OFFSET)) \
|
|
|
|
+ | MCI_BF(name,value))
|
|
|
|
+
|
|
|
|
+/* Register access macros */
|
|
|
|
+#define mci_readl(port,reg) \
|
|
|
|
+ __raw_readl((port)->regs + MCI_##reg)
|
|
|
|
+#define mci_writel(port,reg,value) \
|
|
|
|
+ __raw_writel((value), (port)->regs + MCI_##reg)
|
|
|
|
+
|
|
|
|
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/mtd/nand/Kconfig
|
|
|
|
+++ b/drivers/mtd/nand/Kconfig
|
|
|
|
@@ -272,12 +272,54 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
If you say "m", the module will be called "cs553x_nand.ko".
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
-config MTD_NAND_AT91
|
|
|
|
- bool "Support for NAND Flash / SmartMedia on AT91"
|
|
|
|
- depends on ARCH_AT91
|
|
|
|
+config MTD_NAND_ATMEL
|
|
|
|
+ bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
|
|
|
|
+ depends on ARCH_AT91 || AVR32
|
|
|
|
help
|
|
|
|
Enables support for NAND Flash / Smart Media Card interface
|
|
|
|
- on Atmel AT91 processors.
|
|
|
|
+ on Atmel AT91 and AVR32 processors.
|
|
|
|
+choice
|
|
|
|
+ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
|
|
|
|
+ depends on MTD_NAND_ATMEL
|
|
|
|
+
|
|
|
|
+config MTD_NAND_ATMEL_ECC_HW
|
|
|
|
+ bool "Hardware ECC"
|
|
|
|
+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
|
2008-06-13 00:13:40 +03:00
|
|
|
+ help
|
2008-07-05 17:49:07 +03:00
|
|
|
+ Use hardware ECC instead of software ECC when the chip
|
|
|
|
+ supports it.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ The hardware ECC controller is capable of single bit error
|
|
|
|
+ correction and 2-bit random detection per page.
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ NB : hardware and software ECC schemes are incompatible.
|
|
|
|
+ If you switch from one to another, you'll have to erase your
|
|
|
|
+ mtd partition.
|
|
|
|
+
|
|
|
|
+ If unsure, say Y
|
|
|
|
+
|
|
|
|
+config MTD_NAND_ATMEL_ECC_SOFT
|
|
|
|
+ bool "Software ECC"
|
|
|
|
+ help
|
|
|
|
+ Use software ECC.
|
|
|
|
+
|
|
|
|
+ NB : hardware and software ECC schemes are incompatible.
|
|
|
|
+ If you switch from one to another, you'll have to erase your
|
|
|
|
+ mtd partition.
|
|
|
|
+
|
|
|
|
+config MTD_NAND_ATMEL_ECC_NONE
|
|
|
|
+ bool "No ECC (testing only, DANGEROUS)"
|
|
|
|
+ depends on DEBUG_KERNEL
|
|
|
|
+ help
|
|
|
|
+ No ECC will be used.
|
|
|
|
+ It's not a good idea and it should be reserved for testing
|
|
|
|
+ purpose only.
|
|
|
|
+
|
|
|
|
+ If unsure, say N
|
|
|
|
+
|
|
|
|
+ endchoice
|
|
|
|
+
|
|
|
|
+endchoice
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
config MTD_NAND_CM_X270
|
|
|
|
tristate "Support for NAND Flash on CM-X270 modules"
|
|
|
|
--- a/drivers/mtd/nand/Makefile
|
|
|
|
+++ b/drivers/mtd/nand/Makefile
|
|
|
|
@@ -24,7 +24,7 @@
|
|
|
|
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
|
|
|
|
-obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
|
|
|
|
+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/at91_nand.c
|
|
|
|
+++ /dev/null
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -1,236 +0,0 @@
|
|
|
|
-/*
|
|
|
|
- * drivers/mtd/nand/at91_nand.c
|
|
|
|
- *
|
|
|
|
- * Copyright (C) 2003 Rick Bronson
|
|
|
|
- *
|
|
|
|
- * Derived from drivers/mtd/nand/autcpu12.c
|
|
|
|
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
|
|
|
|
- *
|
|
|
|
- * Derived from drivers/mtd/spia.c
|
|
|
|
- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
|
|
|
|
- *
|
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
|
|
- * published by the Free Software Foundation.
|
|
|
|
- *
|
|
|
|
- */
|
|
|
|
-
|
|
|
|
-#include <linux/slab.h>
|
|
|
|
-#include <linux/module.h>
|
|
|
|
-#include <linux/platform_device.h>
|
|
|
|
-#include <linux/mtd/mtd.h>
|
|
|
|
-#include <linux/mtd/nand.h>
|
|
|
|
-#include <linux/mtd/partitions.h>
|
|
|
|
-
|
|
|
|
-#include <asm/io.h>
|
|
|
|
-#include <asm/sizes.h>
|
|
|
|
-
|
|
|
|
-#include <asm/hardware.h>
|
|
|
|
-#include <asm/arch/board.h>
|
|
|
|
-#include <asm/arch/gpio.h>
|
|
|
|
-
|
|
|
|
-struct at91_nand_host {
|
|
|
|
- struct nand_chip nand_chip;
|
|
|
|
- struct mtd_info mtd;
|
|
|
|
- void __iomem *io_base;
|
|
|
|
- struct at91_nand_data *board;
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Hardware specific access to control-lines
|
|
|
|
- */
|
|
|
|
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
|
|
-{
|
|
|
|
- struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
- struct at91_nand_host *host = nand_chip->priv;
|
|
|
|
-
|
|
|
|
- if (cmd == NAND_CMD_NONE)
|
|
|
|
- return;
|
|
|
|
-
|
|
|
|
- if (ctrl & NAND_CLE)
|
|
|
|
- writeb(cmd, host->io_base + (1 << host->board->cle));
|
|
|
|
- else
|
|
|
|
- writeb(cmd, host->io_base + (1 << host->board->ale));
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Read the Device Ready pin.
|
|
|
|
- */
|
|
|
|
-static int at91_nand_device_ready(struct mtd_info *mtd)
|
|
|
|
-{
|
|
|
|
- struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
- struct at91_nand_host *host = nand_chip->priv;
|
|
|
|
-
|
|
|
|
- return at91_get_gpio_value(host->board->rdy_pin);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Enable NAND.
|
|
|
|
- */
|
|
|
|
-static void at91_nand_enable(struct at91_nand_host *host)
|
|
|
|
-{
|
|
|
|
- if (host->board->enable_pin)
|
|
|
|
- at91_set_gpio_value(host->board->enable_pin, 0);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Disable NAND.
|
|
|
|
- */
|
|
|
|
-static void at91_nand_disable(struct at91_nand_host *host)
|
|
|
|
-{
|
|
|
|
- if (host->board->enable_pin)
|
|
|
|
- at91_set_gpio_value(host->board->enable_pin, 1);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
-const char *part_probes[] = { "cmdlinepart", NULL };
|
|
|
|
-#endif
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Probe for the NAND device.
|
|
|
|
- */
|
|
|
|
-static int __init at91_nand_probe(struct platform_device *pdev)
|
|
|
|
-{
|
|
|
|
- struct at91_nand_host *host;
|
|
|
|
- struct mtd_info *mtd;
|
|
|
|
- struct nand_chip *nand_chip;
|
|
|
|
- int res;
|
|
|
|
-
|
|
|
|
-#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
- struct mtd_partition *partitions = NULL;
|
|
|
|
- int num_partitions = 0;
|
|
|
|
-#endif
|
|
|
|
-
|
|
|
|
- /* Allocate memory for the device structure (and zero it) */
|
|
|
|
- host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
|
|
|
|
- if (!host) {
|
|
|
|
- printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
|
|
|
|
- return -ENOMEM;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- host->io_base = ioremap(pdev->resource[0].start,
|
|
|
|
- pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
|
|
- if (host->io_base == NULL) {
|
|
|
|
- printk(KERN_ERR "at91_nand: ioremap failed\n");
|
|
|
|
- kfree(host);
|
|
|
|
- return -EIO;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- mtd = &host->mtd;
|
|
|
|
- nand_chip = &host->nand_chip;
|
|
|
|
- host->board = pdev->dev.platform_data;
|
|
|
|
-
|
|
|
|
- nand_chip->priv = host; /* link the private data structures */
|
|
|
|
- mtd->priv = nand_chip;
|
|
|
|
- mtd->owner = THIS_MODULE;
|
|
|
|
-
|
|
|
|
- /* Set address of NAND IO lines */
|
|
|
|
- nand_chip->IO_ADDR_R = host->io_base;
|
|
|
|
- nand_chip->IO_ADDR_W = host->io_base;
|
|
|
|
- nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
|
|
|
|
-
|
|
|
|
- if (host->board->rdy_pin)
|
|
|
|
- nand_chip->dev_ready = at91_nand_device_ready;
|
|
|
|
-
|
|
|
|
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
|
|
|
|
- nand_chip->chip_delay = 20; /* 20us command delay time */
|
|
|
|
-
|
|
|
|
- if (host->board->bus_width_16) /* 16-bit bus width */
|
|
|
|
- nand_chip->options |= NAND_BUSWIDTH_16;
|
|
|
|
-
|
|
|
|
- platform_set_drvdata(pdev, host);
|
|
|
|
- at91_nand_enable(host);
|
|
|
|
-
|
|
|
|
- if (host->board->det_pin) {
|
|
|
|
- if (at91_get_gpio_value(host->board->det_pin)) {
|
|
|
|
- printk ("No SmartMedia card inserted.\n");
|
|
|
|
- res = ENXIO;
|
|
|
|
- goto out;
|
|
|
|
- }
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- /* Scan to find existance of the device */
|
|
|
|
- if (nand_scan(mtd, 1)) {
|
|
|
|
- res = -ENXIO;
|
|
|
|
- goto out;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
-#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
-#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
|
|
- mtd->name = "at91_nand";
|
|
|
|
- num_partitions = parse_mtd_partitions(mtd, part_probes,
|
|
|
|
- &partitions, 0);
|
|
|
|
-#endif
|
|
|
|
- if (num_partitions <= 0 && host->board->partition_info)
|
|
|
|
- partitions = host->board->partition_info(mtd->size,
|
|
|
|
- &num_partitions);
|
|
|
|
-
|
|
|
|
- if ((!partitions) || (num_partitions == 0)) {
|
|
|
|
- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
|
|
|
|
- res = ENXIO;
|
|
|
|
- goto release;
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- res = add_mtd_partitions(mtd, partitions, num_partitions);
|
|
|
|
-#else
|
|
|
|
- res = add_mtd_device(mtd);
|
|
|
|
-#endif
|
|
|
|
-
|
|
|
|
- if (!res)
|
|
|
|
- return res;
|
|
|
|
-
|
|
|
|
-release:
|
|
|
|
- nand_release(mtd);
|
|
|
|
-out:
|
|
|
|
- at91_nand_disable(host);
|
|
|
|
- platform_set_drvdata(pdev, NULL);
|
|
|
|
- iounmap(host->io_base);
|
|
|
|
- kfree(host);
|
|
|
|
- return res;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Remove a NAND device.
|
|
|
|
- */
|
|
|
|
-static int __devexit at91_nand_remove(struct platform_device *pdev)
|
|
|
|
-{
|
|
|
|
- struct at91_nand_host *host = platform_get_drvdata(pdev);
|
|
|
|
- struct mtd_info *mtd = &host->mtd;
|
|
|
|
-
|
|
|
|
- nand_release(mtd);
|
|
|
|
-
|
|
|
|
- at91_nand_disable(host);
|
|
|
|
-
|
|
|
|
- iounmap(host->io_base);
|
|
|
|
- kfree(host);
|
|
|
|
-
|
|
|
|
- return 0;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static struct platform_driver at91_nand_driver = {
|
|
|
|
- .probe = at91_nand_probe,
|
|
|
|
- .remove = at91_nand_remove,
|
|
|
|
- .driver = {
|
|
|
|
- .name = "at91_nand",
|
|
|
|
- .owner = THIS_MODULE,
|
|
|
|
- },
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-static int __init at91_nand_init(void)
|
|
|
|
-{
|
|
|
|
- return platform_driver_register(&at91_nand_driver);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-
|
|
|
|
-static void __exit at91_nand_exit(void)
|
|
|
|
-{
|
|
|
|
- platform_driver_unregister(&at91_nand_driver);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-
|
|
|
|
-module_init(at91_nand_init);
|
|
|
|
-module_exit(at91_nand_exit);
|
|
|
|
-
|
|
|
|
-MODULE_LICENSE("GPL");
|
|
|
|
-MODULE_AUTHOR("Rick Bronson");
|
|
|
|
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/mtd/nand/atmel_nand.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,650 @@
|
|
|
|
+/*
|
|
|
|
+ * Copyright (C) 2003 Rick Bronson
|
|
|
|
+ *
|
|
|
|
+ * Derived from drivers/mtd/nand/autcpu12.c
|
|
|
|
+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
|
|
|
|
+ *
|
|
|
|
+ * Derived from drivers/mtd/spia.c
|
|
|
|
+ * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
|
|
|
|
+ *
|
|
|
|
+ *
|
|
|
|
+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
|
|
|
|
+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
|
|
|
|
+ *
|
|
|
|
+ * Derived from Das U-Boot source code
|
|
|
|
+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
|
|
|
|
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
|
|
|
|
+ *
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ *
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#include <linux/slab.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+#include <linux/mtd/mtd.h>
|
|
|
|
+#include <linux/mtd/nand.h>
|
|
|
|
+#include <linux/mtd/partitions.h>
|
|
|
|
+
|
|
|
|
+#include <linux/gpio.h>
|
|
|
|
+#include <linux/io.h>
|
|
|
|
+
|
|
|
|
+#include <asm/arch/board.h>
|
|
|
|
+#include <asm/arch/cpu.h>
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
|
|
|
|
+#define hard_ecc 1
|
|
|
|
+#else
|
|
|
|
+#define hard_ecc 0
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
|
|
|
|
+#define no_ecc 1
|
|
|
|
+#else
|
|
|
|
+#define no_ecc 0
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+/* Register access macros */
|
|
|
|
+#define ecc_readl(add, reg) \
|
|
|
|
+ __raw_readl(add + ATMEL_ECC_##reg)
|
|
|
|
+#define ecc_writel(add, reg, value) \
|
|
|
|
+ __raw_writel((value), add + ATMEL_ECC_##reg)
|
|
|
|
+
|
|
|
|
+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
|
|
|
|
+
|
|
|
|
+/* oob layout for large page size
|
|
|
|
+ * bad block info is on bytes 0 and 1
|
|
|
|
+ * the bytes have to be consecutives to avoid
|
|
|
|
+ * several NAND_CMD_RNDOUT during read
|
|
|
|
+ */
|
|
|
|
+static struct nand_ecclayout atmel_oobinfo_large = {
|
|
|
|
+ .eccbytes = 4,
|
|
|
|
+ .eccpos = {60, 61, 62, 63},
|
|
|
|
+ .oobfree = {
|
|
|
|
+ {2, 58}
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/* oob layout for small page size
|
|
|
|
+ * bad block info is on bytes 4 and 5
|
|
|
|
+ * the bytes have to be consecutives to avoid
|
|
|
|
+ * several NAND_CMD_RNDOUT during read
|
|
|
|
+ */
|
|
|
|
+static struct nand_ecclayout atmel_oobinfo_small = {
|
|
|
|
+ .eccbytes = 4,
|
|
|
|
+ .eccpos = {0, 1, 2, 3},
|
|
|
|
+ .oobfree = {
|
|
|
|
+ {6, 10}
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct atmel_nand_host {
|
|
|
|
+ struct nand_chip nand_chip;
|
|
|
|
+ struct mtd_info mtd;
|
|
|
|
+ void __iomem *io_base;
|
|
|
|
+ struct atmel_nand_data *board;
|
|
|
|
+ struct device *dev;
|
|
|
|
+ void __iomem *ecc;
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Enable NAND.
|
|
|
|
+ */
|
|
|
|
+static void atmel_nand_enable(struct atmel_nand_host *host)
|
|
|
|
+{
|
|
|
|
+ if (host->board->enable_pin)
|
|
|
|
+ gpio_set_value(host->board->enable_pin, 0);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Disable NAND.
|
|
|
|
+ */
|
|
|
|
+static void atmel_nand_disable(struct atmel_nand_host *host)
|
|
|
|
+{
|
|
|
|
+ if (host->board->enable_pin)
|
|
|
|
+ gpio_set_value(host->board->enable_pin, 1);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Hardware specific access to control-lines
|
|
|
|
+ */
|
|
|
|
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+ struct atmel_nand_host *host = nand_chip->priv;
|
|
|
|
+
|
|
|
|
+ if (ctrl & NAND_CTRL_CHANGE) {
|
|
|
|
+ if (ctrl & NAND_NCE)
|
|
|
|
+ atmel_nand_enable(host);
|
|
|
|
+ else
|
|
|
|
+ atmel_nand_disable(host);
|
|
|
|
+ }
|
|
|
|
+ if (cmd == NAND_CMD_NONE)
|
|
|
|
+ return;
|
|
|
|
+
|
|
|
|
+ if (ctrl & NAND_CLE)
|
|
|
|
+ writeb(cmd, host->io_base + (1 << host->board->cle));
|
|
|
|
+ else
|
|
|
|
+ writeb(cmd, host->io_base + (1 << host->board->ale));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Read the Device Ready pin.
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_device_ready(struct mtd_info *mtd)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+ struct atmel_nand_host *host = nand_chip->priv;
|
|
|
|
+
|
|
|
|
+ return gpio_get_value(host->board->rdy_pin);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Minimal-overhead PIO for data access.
|
|
|
|
+ */
|
|
|
|
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+
|
|
|
|
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+
|
|
|
|
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+
|
|
|
|
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+
|
|
|
|
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * write oob for small pages
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
|
|
|
|
+ struct nand_chip *chip, int page)
|
|
|
|
+{
|
|
|
|
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
|
|
+ int eccsize = chip->ecc.size, length = mtd->oobsize;
|
|
|
|
+ int len, pos, status = 0;
|
|
|
|
+ const uint8_t *bufpoi = chip->oob_poi;
|
|
|
|
+
|
|
|
|
+ pos = eccsize + chunk;
|
|
|
|
+
|
|
|
|
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
|
|
|
|
+ len = min_t(int, length, chunk);
|
|
|
|
+ chip->write_buf(mtd, bufpoi, len);
|
|
|
|
+ bufpoi += len;
|
|
|
|
+ length -= len;
|
|
|
|
+ if (length > 0)
|
|
|
|
+ chip->write_buf(mtd, bufpoi, length);
|
|
|
|
+
|
|
|
|
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
|
|
|
|
+ status = chip->waitfunc(mtd, chip);
|
|
|
|
+
|
|
|
|
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
|
|
|
|
+
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * read oob for small pages
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
|
|
|
|
+ struct nand_chip *chip, int page, int sndcmd)
|
|
|
|
+{
|
|
|
|
+ if (sndcmd) {
|
|
|
|
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
|
|
|
|
+ sndcmd = 0;
|
|
|
|
+ }
|
|
|
|
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
|
|
+ return sndcmd;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Calculate HW ECC
|
|
|
|
+ *
|
|
|
|
+ * function called after a write
|
|
|
|
+ *
|
|
|
|
+ * mtd: MTD block structure
|
|
|
|
+ * dat: raw data (unused)
|
|
|
|
+ * ecc_code: buffer for ECC
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_calculate(struct mtd_info *mtd,
|
|
|
|
+ const u_char *dat, unsigned char *ecc_code)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+ struct atmel_nand_host *host = nand_chip->priv;
|
|
|
|
+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
|
|
|
|
+ unsigned int ecc_value;
|
|
|
|
+
|
|
|
|
+ /* get the first 2 ECC bytes */
|
|
|
|
+ ecc_value = ecc_readl(host->ecc, PR);
|
|
|
|
+
|
|
|
|
+ ecc_code[eccpos[0]] = ecc_value & 0xFF;
|
|
|
|
+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
|
|
|
|
+
|
|
|
|
+ /* get the last 2 ECC bytes */
|
|
|
|
+ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
|
|
|
|
+
|
|
|
|
+ ecc_code[eccpos[2]] = ecc_value & 0xFF;
|
|
|
|
+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * HW ECC read page function
|
|
|
|
+ *
|
|
|
|
+ * mtd: mtd info structure
|
|
|
|
+ * chip: nand chip info structure
|
|
|
|
+ * buf: buffer to store read data
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_read_page(struct mtd_info *mtd,
|
|
|
|
+ struct nand_chip *chip, uint8_t *buf)
|
|
|
|
+{
|
|
|
|
+ int eccsize = chip->ecc.size;
|
|
|
|
+ int eccbytes = chip->ecc.bytes;
|
|
|
|
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
|
|
|
|
+ uint8_t *p = buf;
|
|
|
|
+ uint8_t *oob = chip->oob_poi;
|
|
|
|
+ uint8_t *ecc_pos;
|
|
|
|
+ int stat;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * Errata: ALE is incorrectly wired up to the ECC controller
|
|
|
|
+ * on the AP7000, so it will include the address cycles in the
|
|
|
|
+ * ECC calculation.
|
|
|
|
+ *
|
|
|
|
+ * Workaround: Reset the parity registers before reading the
|
|
|
|
+ * actual data.
|
|
|
|
+ */
|
|
|
|
+ if (cpu_is_at32ap7000()) {
|
|
|
|
+ struct atmel_nand_host *host = chip->priv;
|
|
|
|
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* read the page */
|
|
|
|
+ chip->read_buf(mtd, p, eccsize);
|
|
|
|
+
|
|
|
|
+ /* move to ECC position if needed */
|
|
|
|
+ if (eccpos[0] != 0) {
|
|
|
|
+ /* This only works on large pages
|
|
|
|
+ * because the ECC controller waits for
|
|
|
|
+ * NAND_CMD_RNDOUTSTART after the
|
|
|
|
+ * NAND_CMD_RNDOUT.
|
|
|
|
+ * anyway, for small pages, the eccpos[0] == 0
|
|
|
|
+ */
|
|
|
|
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
|
|
|
|
+ mtd->writesize + eccpos[0], -1);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* the ECC controller needs to read the ECC just after the data */
|
|
|
|
+ ecc_pos = oob + eccpos[0];
|
|
|
|
+ chip->read_buf(mtd, ecc_pos, eccbytes);
|
|
|
|
+
|
|
|
|
+ /* check if there's an error */
|
|
|
|
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
|
|
|
|
+
|
|
|
|
+ if (stat < 0)
|
|
|
|
+ mtd->ecc_stats.failed++;
|
|
|
|
+ else
|
|
|
|
+ mtd->ecc_stats.corrected += stat;
|
|
|
|
+
|
|
|
|
+ /* get back to oob start (end of page) */
|
|
|
|
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
|
|
|
|
+
|
|
|
|
+ /* read the oob */
|
|
|
|
+ chip->read_buf(mtd, oob, mtd->oobsize);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * HW ECC Correction
|
|
|
|
+ *
|
|
|
|
+ * function called after a read
|
|
|
|
+ *
|
|
|
|
+ * mtd: MTD block structure
|
|
|
|
+ * dat: raw data read from the chip
|
|
|
|
+ * read_ecc: ECC from the chip (unused)
|
|
|
|
+ * isnull: unused
|
|
|
|
+ *
|
|
|
|
+ * Detect and correct a 1 bit error for a page
|
|
|
|
+ */
|
|
|
|
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
|
|
|
|
+ u_char *read_ecc, u_char *isnull)
|
|
|
|
+{
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+ struct atmel_nand_host *host = nand_chip->priv;
|
|
|
|
+ unsigned int ecc_status;
|
|
|
|
+ unsigned int ecc_word, ecc_bit;
|
|
|
|
+
|
|
|
|
+ /* get the status from the Status Register */
|
|
|
|
+ ecc_status = ecc_readl(host->ecc, SR);
|
|
|
|
+
|
|
|
|
+ /* if there's no error */
|
|
|
|
+ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+ /* get error bit offset (4 bits) */
|
|
|
|
+ ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
|
|
|
|
+ /* get word address (12 bits) */
|
|
|
|
+ ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
|
|
|
|
+ ecc_word >>= 4;
|
|
|
|
+
|
|
|
|
+ /* if there are multiple errors */
|
|
|
|
+ if (ecc_status & ATMEL_ECC_MULERR) {
|
|
|
|
+ /* check if it is a freshly erased block
|
|
|
|
+ * (filled with 0xff) */
|
|
|
|
+ if ((ecc_bit == ATMEL_ECC_BITADDR)
|
|
|
|
+ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
|
|
|
|
+ /* the block has just been erased, return OK */
|
|
|
|
+ return 0;
|
|
|
|
+ }
|
|
|
|
+ /* it doesn't seems to be a freshly
|
|
|
|
+ * erased block.
|
|
|
|
+ * We can't correct so many errors */
|
|
|
|
+ dev_dbg(host->dev, "atmel_nand : multiple errors detected."
|
|
|
|
+ " Unable to correct.\n");
|
|
|
|
+ return -EIO;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* if there's a single bit error : we can correct it */
|
|
|
|
+ if (ecc_status & ATMEL_ECC_ECCERR) {
|
|
|
|
+ /* there's nothing much to do here.
|
|
|
|
+ * the bit error is on the ECC itself.
|
|
|
|
+ */
|
|
|
|
+ dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
|
|
|
|
+ " Nothing to correct\n");
|
|
|
|
+ return 0;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ dev_dbg(host->dev, "atmel_nand : one bit error on data."
|
|
|
|
+ " (word offset in the page :"
|
|
|
|
+ " 0x%x bit offset : 0x%x)\n",
|
|
|
|
+ ecc_word, ecc_bit);
|
|
|
|
+ /* correct the error */
|
|
|
|
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
|
|
|
|
+ /* 16 bits words */
|
|
|
|
+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
|
|
|
|
+ } else {
|
|
|
|
+ /* 8 bits words */
|
|
|
|
+ dat[ecc_word] ^= (1 << ecc_bit);
|
|
|
|
+ }
|
|
|
|
+ dev_dbg(host->dev, "atmel_nand : error corrected\n");
|
|
|
|
+ return 1;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Enable HW ECC : unused on most chips
|
|
|
|
+ */
|
|
|
|
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
|
|
|
|
+{
|
|
|
|
+ if (cpu_is_at32ap7000()) {
|
|
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
+ struct atmel_nand_host *host = nand_chip->priv;
|
|
|
|
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
+static const char *part_probes[] = { "cmdlinepart", NULL };
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Probe for the NAND device.
|
|
|
|
+ */
|
|
|
|
+static int __init atmel_nand_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct atmel_nand_host *host;
|
|
|
|
+ struct mtd_info *mtd;
|
|
|
|
+ struct nand_chip *nand_chip;
|
|
|
|
+ struct resource *regs;
|
|
|
|
+ struct resource *mem;
|
|
|
|
+ int res;
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
+ struct mtd_partition *partitions = NULL;
|
|
|
|
+ int num_partitions = 0;
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!mem) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
|
|
|
|
+ return -ENXIO;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* Allocate memory for the device structure (and zero it) */
|
|
|
|
+ host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
|
|
|
|
+ if (!host) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
|
|
|
|
+ if (host->io_base == NULL) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
|
|
|
|
+ res = -EIO;
|
|
|
|
+ goto err_nand_ioremap;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mtd = &host->mtd;
|
|
|
|
+ nand_chip = &host->nand_chip;
|
|
|
|
+ host->board = pdev->dev.platform_data;
|
|
|
|
+ host->dev = &pdev->dev;
|
|
|
|
+
|
|
|
|
+ nand_chip->priv = host; /* link the private data structures */
|
|
|
|
+ mtd->priv = nand_chip;
|
|
|
|
+ mtd->owner = THIS_MODULE;
|
|
|
|
+
|
|
|
|
+ /* Set address of NAND IO lines */
|
|
|
|
+ nand_chip->IO_ADDR_R = host->io_base;
|
|
|
|
+ nand_chip->IO_ADDR_W = host->io_base;
|
|
|
|
+ nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
|
|
|
|
+
|
|
|
|
+ if (host->board->rdy_pin)
|
|
|
|
+ nand_chip->dev_ready = atmel_nand_device_ready;
|
|
|
|
+
|
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
+ if (!regs && hard_ecc) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: can't get I/O resource "
|
|
|
|
+ "regs\nFalling back on software ECC\n");
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
|
|
|
|
+ if (no_ecc)
|
|
|
|
+ nand_chip->ecc.mode = NAND_ECC_NONE;
|
|
|
|
+ if (hard_ecc && regs) {
|
|
|
|
+ host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (host->ecc == NULL) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
|
|
|
|
+ res = -EIO;
|
|
|
|
+ goto err_ecc_ioremap;
|
|
|
|
+ }
|
|
|
|
+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
|
|
|
|
+ nand_chip->ecc.calculate = atmel_nand_calculate;
|
|
|
|
+ nand_chip->ecc.correct = atmel_nand_correct;
|
|
|
|
+ nand_chip->ecc.hwctl = atmel_nand_hwctl;
|
|
|
|
+ nand_chip->ecc.read_page = atmel_nand_read_page;
|
|
|
|
+ nand_chip->ecc.bytes = 4;
|
|
|
|
+ nand_chip->ecc.prepad = 0;
|
|
|
|
+ nand_chip->ecc.postpad = 0;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ nand_chip->chip_delay = 20; /* 20us command delay time */
|
|
|
|
+
|
|
|
|
+ if (host->board->bus_width_16) { /* 16-bit bus width */
|
|
|
|
+ nand_chip->options |= NAND_BUSWIDTH_16;
|
|
|
|
+ nand_chip->read_buf = atmel_read_buf16;
|
|
|
|
+ nand_chip->write_buf = atmel_write_buf16;
|
|
|
|
+ } else {
|
|
|
|
+ nand_chip->read_buf = atmel_read_buf;
|
|
|
|
+ nand_chip->write_buf = atmel_write_buf;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ platform_set_drvdata(pdev, host);
|
|
|
|
+ atmel_nand_enable(host);
|
|
|
|
+
|
|
|
|
+ if (host->board->det_pin) {
|
|
|
|
+ if (gpio_get_value(host->board->det_pin)) {
|
|
|
|
+ printk("No SmartMedia card inserted.\n");
|
|
|
|
+ res = ENXIO;
|
|
|
|
+ goto err_no_card;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* first scan to find the device and get the page size */
|
|
|
|
+ if (nand_scan_ident(mtd, 1)) {
|
|
|
|
+ res = -ENXIO;
|
|
|
|
+ goto err_scan_ident;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
|
|
|
|
+ /* ECC is calculated for the whole page (1 step) */
|
|
|
|
+ nand_chip->ecc.size = mtd->writesize;
|
|
|
|
+
|
|
|
|
+ /* set ECC page size and oob layout */
|
|
|
|
+ switch (mtd->writesize) {
|
|
|
|
+ case 512:
|
|
|
|
+ nand_chip->ecc.layout = &atmel_oobinfo_small;
|
|
|
|
+ nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
|
|
|
|
+ nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
|
|
|
|
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
|
|
|
|
+ break;
|
|
|
|
+ case 1024:
|
|
|
|
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
|
|
|
|
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
|
|
|
|
+ break;
|
|
|
|
+ case 2048:
|
|
|
|
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
|
|
|
|
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
|
|
|
|
+ break;
|
|
|
|
+ case 4096:
|
|
|
|
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
|
|
|
|
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ /* page size not handled by HW ECC */
|
|
|
|
+ /* switching back to soft ECC */
|
|
|
|
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
|
|
|
|
+ nand_chip->ecc.calculate = NULL;
|
|
|
|
+ nand_chip->ecc.correct = NULL;
|
|
|
|
+ nand_chip->ecc.hwctl = NULL;
|
|
|
|
+ nand_chip->ecc.read_page = NULL;
|
|
|
|
+ nand_chip->ecc.postpad = 0;
|
|
|
|
+ nand_chip->ecc.prepad = 0;
|
|
|
|
+ nand_chip->ecc.bytes = 0;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* second phase scan */
|
|
|
|
+ if (nand_scan_tail(mtd)) {
|
|
|
|
+ res = -ENXIO;
|
|
|
|
+ goto err_scan_tail;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
+#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
|
|
+ mtd->name = "atmel_nand";
|
|
|
|
+ num_partitions = parse_mtd_partitions(mtd, part_probes,
|
|
|
|
+ &partitions, 0);
|
|
|
|
+#endif
|
|
|
|
+ if (num_partitions <= 0 && host->board->partition_info)
|
|
|
|
+ partitions = host->board->partition_info(mtd->size,
|
|
|
|
+ &num_partitions);
|
|
|
|
+
|
|
|
|
+ if ((!partitions) || (num_partitions == 0)) {
|
|
|
|
+ printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
|
|
|
|
+ res = ENXIO;
|
|
|
|
+ goto err_no_partitions;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ res = add_mtd_partitions(mtd, partitions, num_partitions);
|
|
|
|
+#else
|
|
|
|
+ res = add_mtd_device(mtd);
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+ if (!res)
|
|
|
|
+ return res;
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
+err_no_partitions:
|
|
|
|
+#endif
|
|
|
|
+ nand_release(mtd);
|
|
|
|
+err_scan_tail:
|
|
|
|
+err_scan_ident:
|
|
|
|
+err_no_card:
|
|
|
|
+ atmel_nand_disable(host);
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+ if (host->ecc)
|
|
|
|
+ iounmap(host->ecc);
|
|
|
|
+err_ecc_ioremap:
|
|
|
|
+ iounmap(host->io_base);
|
|
|
|
+err_nand_ioremap:
|
|
|
|
+ kfree(host);
|
|
|
|
+ return res;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Remove a NAND device.
|
|
|
|
+ */
|
|
|
|
+static int __exit atmel_nand_remove(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct atmel_nand_host *host = platform_get_drvdata(pdev);
|
|
|
|
+ struct mtd_info *mtd = &host->mtd;
|
|
|
|
+
|
|
|
|
+ nand_release(mtd);
|
|
|
|
+
|
|
|
|
+ atmel_nand_disable(host);
|
|
|
|
+
|
|
|
|
+ if (host->ecc)
|
|
|
|
+ iounmap(host->ecc);
|
|
|
|
+ iounmap(host->io_base);
|
|
|
|
+ kfree(host);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct platform_driver atmel_nand_driver = {
|
|
|
|
+ .remove = __exit_p(atmel_nand_remove),
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "atmel_nand",
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init atmel_nand_init(void)
|
|
|
|
+{
|
|
|
|
+ return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+static void __exit atmel_nand_exit(void)
|
|
|
|
+{
|
|
|
|
+ platform_driver_unregister(&atmel_nand_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+module_init(atmel_nand_init);
|
|
|
|
+module_exit(atmel_nand_exit);
|
|
|
|
+
|
|
|
|
+MODULE_LICENSE("GPL");
|
|
|
|
+MODULE_AUTHOR("Rick Bronson");
|
|
|
|
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
|
|
|
|
+MODULE_ALIAS("platform:atmel_nand");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,36 @@
|
|
|
|
+/*
|
|
|
|
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
|
|
|
|
+ * Based on AT91SAM9260 datasheet revision B.
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
+ * option) any later version.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#ifndef ATMEL_NAND_ECC_H
|
|
|
|
+#define ATMEL_NAND_ECC_H
|
|
|
|
+
|
|
|
|
+#define ATMEL_ECC_CR 0x00 /* Control register */
|
|
|
|
+#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
|
|
|
|
+
|
|
|
|
+#define ATMEL_ECC_MR 0x04 /* Mode register */
|
|
|
|
+#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
|
|
|
|
+#define ATMEL_ECC_PAGESIZE_528 (0)
|
|
|
|
+#define ATMEL_ECC_PAGESIZE_1056 (1)
|
|
|
|
+#define ATMEL_ECC_PAGESIZE_2112 (2)
|
|
|
|
+#define ATMEL_ECC_PAGESIZE_4224 (3)
|
|
|
|
+
|
|
|
|
+#define ATMEL_ECC_SR 0x08 /* Status register */
|
|
|
|
+#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
|
|
|
|
+#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
|
|
|
|
+#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
|
|
|
|
+
|
|
|
|
+#define ATMEL_ECC_PR 0x0c /* Parity register */
|
|
|
|
+#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
|
|
|
|
+#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
|
|
|
|
+
|
|
|
|
+#define ATMEL_ECC_NPR 0x10 /* NParity register */
|
|
|
|
+#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
|
|
|
|
+
|
|
|
|
+#endif
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/bf5xx_nand.c
|
|
|
|
+++ b/drivers/mtd/nand/bf5xx_nand.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -803,3 +803,4 @@
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR(DRV_AUTHOR);
|
|
|
|
MODULE_DESCRIPTION(DRV_DESC);
|
|
|
|
+MODULE_ALIAS("platform:" DRV_NAME);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/ndfc.c
|
|
|
|
+++ b/drivers/mtd/nand/ndfc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -317,3 +317,5 @@
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
|
|
|
|
MODULE_DESCRIPTION("Platform driver for NDFC");
|
|
|
|
+MODULE_ALIAS("platform:ndfc-chip");
|
|
|
|
+MODULE_ALIAS("platform:ndfc-nand");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/orion_nand.c
|
|
|
|
+++ b/drivers/mtd/nand/orion_nand.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -169,3 +169,4 @@
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Tzachi Perelstein");
|
|
|
|
MODULE_DESCRIPTION("NAND glue for Orion platforms");
|
|
|
|
+MODULE_ALIAS("platform:orion_nand");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/plat_nand.c
|
|
|
|
+++ b/drivers/mtd/nand/plat_nand.c
|
|
|
|
@@ -161,3 +161,4 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Vitaly Wool");
|
|
|
|
MODULE_DESCRIPTION("Simple generic NAND driver");
|
|
|
|
+MODULE_ALIAS("platform:gen_nand");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/mtd/nand/s3c2410.c
|
|
|
|
+++ b/drivers/mtd/nand/s3c2410.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -927,3 +927,6 @@
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
|
|
MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
|
|
|
|
+MODULE_ALIAS("platform:s3c2410-nand");
|
|
|
|
+MODULE_ALIAS("platform:s3c2412-nand");
|
|
|
|
+MODULE_ALIAS("platform:s3c2440-nand");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/net/macb.c
|
|
|
|
+++ b/drivers/net/macb.c
|
|
|
|
@@ -1277,8 +1277,45 @@
|
|
|
|
return 0;
|
2008-06-13 00:13:40 +03:00
|
|
|
}
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+static int macb_suspend(struct platform_device *pdev, pm_message_t state)
|
2008-06-13 00:13:40 +03:00
|
|
|
+{
|
2008-06-13 01:24:27 +03:00
|
|
|
+ struct net_device *netdev = platform_get_drvdata(pdev);
|
|
|
|
+ struct macb *bp = netdev_priv(netdev);
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+ netif_device_detach(netdev);
|
|
|
|
+
|
|
|
|
+#ifndef CONFIG_ARCH_AT91
|
|
|
|
+ clk_disable(bp->hclk);
|
|
|
|
+#endif
|
|
|
|
+ clk_disable(bp->pclk);
|
|
|
|
+
|
|
|
|
+ return 0;
|
2008-06-13 00:13:40 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+static int macb_resume(struct platform_device *pdev)
|
2008-06-13 00:13:40 +03:00
|
|
|
+{
|
2008-06-13 01:24:27 +03:00
|
|
|
+ struct net_device *netdev = platform_get_drvdata(pdev);
|
|
|
|
+ struct macb *bp = netdev_priv(netdev);
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+ clk_enable(bp->pclk);
|
|
|
|
+#ifndef CONFIG_ARCH_AT91
|
|
|
|
+ clk_enable(bp->hclk);
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+ netif_device_attach(netdev);
|
|
|
|
+
|
|
|
|
+ return 0;
|
2008-06-13 00:13:40 +03:00
|
|
|
+}
|
2008-06-13 01:24:27 +03:00
|
|
|
+#else
|
|
|
|
+#define macb_suspend NULL
|
|
|
|
+#define macb_resume NULL
|
|
|
|
+#endif
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
static struct platform_driver macb_driver = {
|
|
|
|
.remove = __exit_p(macb_remove),
|
|
|
|
+ .suspend = macb_suspend,
|
|
|
|
+ .resume = macb_resume,
|
|
|
|
.driver = {
|
|
|
|
.name = "macb",
|
|
|
|
},
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/parport/Kconfig
|
|
|
|
+++ b/drivers/parport/Kconfig
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -36,7 +36,7 @@
|
|
|
|
config PARPORT_PC
|
|
|
|
tristate "PC-style hardware"
|
|
|
|
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
|
|
|
|
- (!M68K || ISA) && !MN10300
|
|
|
|
+ (!M68K || ISA) && !MN10300 && !AVR32
|
|
|
|
---help---
|
|
|
|
You should say Y here if you have a PC-style parallel port. All
|
|
|
|
IBM PC compatible computers and some Alphas have PC-style
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/pcmcia/Kconfig
|
|
|
|
+++ b/drivers/pcmcia/Kconfig
|
|
|
|
@@ -277,6 +277,13 @@
|
|
|
|
Say Y here to support the CompactFlash controller on the
|
|
|
|
PA Semi Electra eval board.
|
|
|
|
|
|
|
|
+config AT32_CF
|
|
|
|
+ tristate "AT32AP CompactFlash Controller"
|
|
|
|
+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
|
|
|
|
+ help
|
|
|
|
+ Say Y here to support the CompactFlash controller on AT32 chips.
|
|
|
|
+ Or choose M to compile the driver as a module named "at32_cf".
|
|
|
|
+
|
|
|
|
config PCCARD_NONSTATIC
|
|
|
|
tristate
|
|
|
|
|
|
|
|
--- a/drivers/pcmcia/Makefile
|
|
|
|
+++ b/drivers/pcmcia/Makefile
|
|
|
|
@@ -38,6 +38,7 @@
|
|
|
|
obj-$(CONFIG_OMAP_CF) += omap_cf.o
|
|
|
|
obj-$(CONFIG_AT91_CF) += at91_cf.o
|
|
|
|
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
|
|
|
|
+obj-$(CONFIG_AT32_CF) += at32_cf.o
|
|
|
|
|
|
|
|
sa11xx_core-y += soc_common.o sa11xx_base.o
|
|
|
|
pxa2xx_core-y += soc_common.o pxa2xx_base.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/drivers/pcmcia/at32_cf.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,533 @@
|
|
|
|
+/*
|
|
|
|
+ * Driver for AVR32 Static Memory Controller: CompactFlash support
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2006 Atmel Norway
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or
|
|
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
|
|
+ * License, or (at your option) any later version.
|
|
|
|
+ *
|
|
|
|
+ * This program is distributed in the hope that it will be useful, but
|
|
|
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
+ * General Public License for more details.
|
|
|
|
+ *
|
|
|
|
+ * You should have received a copy of the GNU General Public License
|
|
|
|
+ * along with this program; if not, write to the Free Software
|
|
|
|
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
|
|
|
|
+ * 02111-1307, USA.
|
|
|
|
+ *
|
|
|
|
+ * The full GNU General Public License is included in this
|
|
|
|
+ * distribution in the file called COPYING.
|
|
|
|
+ */
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/kernel.h>
|
|
|
|
+#include <linux/platform_device.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/device.h>
|
|
|
|
+#include <linux/delay.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
|
|
+
|
|
|
|
+#include <pcmcia/ss.h>
|
|
|
|
+
|
|
|
|
+#include <asm/gpio.h>
|
|
|
|
+#include <asm/io.h>
|
|
|
|
+#include <asm/arch/board.h>
|
|
|
|
+
|
|
|
|
+#include <asm/arch/smc.h>
|
|
|
|
+
|
|
|
|
+struct at32_cf_socket {
|
|
|
|
+ struct pcmcia_socket socket;
|
|
|
|
+ int detect_pin;
|
|
|
|
+ int reset_pin;
|
|
|
|
+ int vcc_pin;
|
|
|
|
+ int ready_pin;
|
|
|
|
+ struct resource res_attr;
|
|
|
|
+ struct resource res_mem;
|
|
|
|
+ struct resource res_io;
|
|
|
|
+ struct smc_config smc;
|
|
|
|
+ unsigned int irq;
|
|
|
|
+ unsigned int cf_cs;
|
|
|
|
+ socket_state_t state;
|
|
|
|
+ unsigned present:1;
|
|
|
|
+};
|
|
|
|
+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * We have the following memory layout relative to the base address:
|
|
|
|
+ *
|
|
|
|
+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
|
|
|
|
+ * True IDE Mode: 00c0 0000 -> 00df ffff
|
|
|
|
+ * I/O memory: 0080 0000 -> 00bf ffff
|
|
|
|
+ * Common memory: 0040 0000 -> 007f ffff
|
|
|
|
+ * Attribute memory: 0000 0000 -> 003f ffff
|
|
|
|
+ */
|
|
|
|
+#define CF_ATTR_OFFSET 0x00000000
|
|
|
|
+#define CF_MEM_OFFSET 0x00400000
|
|
|
|
+#define CF_IO_OFFSET 0x00800000
|
|
|
|
+#define CF_RES_SIZE 4096
|
|
|
|
+
|
|
|
|
+#ifdef DEBUG
|
|
|
|
+
|
|
|
|
+static int pc_debug;
|
|
|
|
+module_param(pc_debug, int, 0644);
|
|
|
|
+
|
|
|
|
+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
|
|
|
|
+ int level, const char *fmt, ...)
|
|
|
|
+{
|
|
|
|
+ va_list args;
|
|
|
|
+
|
|
|
|
+ if (pc_debug > level) {
|
|
|
|
+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
|
|
|
|
+ va_start(args, fmt);
|
|
|
|
+ vprintk(fmt, args);
|
|
|
|
+ va_end(args);
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#define debug(cf, lvl, fmt, arg...) \
|
|
|
|
+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
|
|
|
|
+
|
|
|
|
+#else
|
|
|
|
+#define debug(cf, lvl, fmt, arg...) do { } while (0)
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+static inline int at32_cf_present(struct at32_cf_socket *cf)
|
|
|
|
+{
|
|
|
|
+ int present = 1;
|
|
|
|
+
|
|
|
|
+ /* If we don't have a detect pin, assume the card is present */
|
|
|
|
+ if (cf->detect_pin >= 0)
|
|
|
|
+ present = !gpio_get_value(cf->detect_pin);
|
|
|
|
+
|
|
|
|
+ return present;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf = dev_id;
|
|
|
|
+ unsigned int present;
|
|
|
|
+
|
|
|
|
+ present = at32_cf_present(cf);
|
|
|
|
+ if (present != cf->present) {
|
|
|
|
+ cf->present = present;
|
|
|
|
+ debug(cf, 3, "card %s\n", present ? "present" : "gone");
|
|
|
|
+ pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return IRQ_HANDLED;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf;
|
|
|
|
+ u_int status = 0;
|
|
|
|
+
|
|
|
|
+ cf = container_of(sock, struct at32_cf_socket, socket);
|
|
|
|
+
|
|
|
|
+ if (at32_cf_present(cf)) {
|
|
|
|
+ /* NOTE: gpio on AP7xxx is 3.3V */
|
|
|
|
+ status = SS_DETECT | SS_3VCARD;
|
|
|
|
+ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
|
|
|
|
+ status |= SS_READY;
|
|
|
|
+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
|
|
|
|
+ status |= SS_POWERON;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ *value = status;
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
|
|
|
|
+
|
|
|
|
+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
|
|
|
|
+ (state->csc_mask==0)?"<NONE> ":"",
|
|
|
|
+ (state->csc_mask&SS_DETECT)?"DETECT ":"",
|
|
|
|
+ (state->csc_mask&SS_READY)?"READY ":"",
|
|
|
|
+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
|
|
|
|
+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
|
|
|
|
+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
|
|
|
|
+ (state->flags==0)?"<NONE> ":"",
|
|
|
|
+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
|
|
|
|
+ (state->flags&SS_IOCARD)?"IOCARD ":"",
|
|
|
|
+ (state->flags&SS_RESET)?"RESET ":"",
|
|
|
|
+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
|
|
|
|
+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
|
|
|
|
+ state->Vcc, state->Vpp, state->io_irq);
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * TODO: Allow boards to override this in case they have level
|
|
|
|
+ * converters.
|
|
|
|
+ */
|
|
|
|
+ switch (state->Vcc) {
|
|
|
|
+ case 0:
|
|
|
|
+ if (cf->vcc_pin >= 0)
|
|
|
|
+ gpio_set_value(cf->vcc_pin, 0);
|
|
|
|
+ break;
|
|
|
|
+ case 33:
|
|
|
|
+ if (cf->vcc_pin >= 0)
|
|
|
|
+ gpio_set_value(cf->vcc_pin, 1);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (cf->reset_pin >= 0)
|
|
|
|
+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
|
|
|
|
+
|
|
|
|
+ cf->state = *state;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int at32_cf_socket_init(struct pcmcia_socket *sock)
|
|
|
|
+{
|
|
|
|
+ debug(to_at32_cf(sock), 2, "called\n");
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int at32_cf_suspend(struct pcmcia_socket *sock)
|
|
|
|
+{
|
|
|
|
+ debug(to_at32_cf(sock), 2, "called\n");
|
|
|
|
+
|
|
|
|
+ at32_cf_set_socket(sock, &dead_socket);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
|
|
|
|
+ struct pccard_io_map *map)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
|
|
|
|
+ int retval;
|
|
|
|
+
|
|
|
|
+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
|
|
|
|
+ map->map, map->speed, map->start, map->stop);
|
|
|
|
+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
|
|
|
|
+ (map->flags == 0) ? "<NONE>":"",
|
|
|
|
+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
|
|
|
|
+ (map->flags & MAP_16BIT) ? "16BIT " : "",
|
|
|
|
+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
|
|
|
|
+ (map->flags & MAP_0WS) ? "0WS " : "",
|
|
|
|
+ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
|
|
|
|
+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
|
|
|
|
+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
|
|
|
|
+
|
|
|
|
+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
|
|
|
|
+
|
|
|
|
+ if (map->flags & MAP_16BIT)
|
|
|
|
+ cf->smc.bus_width = 2;
|
|
|
|
+ else
|
|
|
|
+ cf->smc.bus_width = 1;
|
|
|
|
+
|
|
|
|
+ if (map->flags & MAP_USE_WAIT)
|
|
|
|
+ cf->smc.nwait_mode = 3;
|
|
|
|
+ else
|
|
|
|
+ cf->smc.nwait_mode = 0;
|
|
|
|
+
|
|
|
|
+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
|
|
+ if (retval) {
|
|
|
|
+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
|
|
|
|
+ return retval;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ map->start = cf->socket.io_offset;
|
|
|
|
+ map->stop = map->start + CF_RES_SIZE - 1;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int
|
|
|
|
+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf;
|
|
|
|
+ struct resource *res;
|
|
|
|
+ int retval;
|
|
|
|
+
|
|
|
|
+ cf = container_of(sock, struct at32_cf_socket, socket);
|
|
|
|
+
|
|
|
|
+ debug(cf, 2, "map %u speed %u card_start %08x\n",
|
|
|
|
+ map->map, map->speed, map->card_start);
|
|
|
|
+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
|
|
|
|
+ (map->flags==0)?"<NONE>":"",
|
|
|
|
+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
|
|
|
|
+ (map->flags&MAP_16BIT)?"16BIT ":"",
|
|
|
|
+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
|
|
|
|
+ (map->flags&MAP_0WS)?"0WS ":"",
|
|
|
|
+ (map->flags&MAP_WRPROT)?"WRPROT ":"",
|
|
|
|
+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
|
|
|
|
+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
|
|
|
|
+
|
|
|
|
+ if (map->card_start)
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
|
|
|
|
+
|
|
|
|
+ if (map->flags & MAP_ATTRIB) {
|
|
|
|
+ res = &cf->res_attr;
|
|
|
|
+
|
|
|
|
+ /* Linksys WCF12 seems to use WAIT when reading CIS */
|
|
|
|
+ map->flags |= MAP_USE_WAIT;
|
|
|
|
+ } else {
|
|
|
|
+ res = &cf->res_mem;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (map->flags & MAP_USE_WAIT)
|
|
|
|
+ cf->smc.nwait_mode = 3;
|
|
|
|
+ else
|
|
|
|
+ cf->smc.nwait_mode = 0;
|
|
|
|
+
|
|
|
|
+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
|
|
+ if (retval) {
|
|
|
|
+ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
|
|
|
|
+ return retval;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ map->static_start = res->start;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct pccard_operations at32_cf_ops = {
|
|
|
|
+ .init = at32_cf_socket_init,
|
|
|
|
+ .suspend = at32_cf_suspend,
|
|
|
|
+ .get_status = at32_cf_get_status,
|
|
|
|
+ .set_socket = at32_cf_set_socket,
|
|
|
|
+ .set_io_map = at32_cf_set_io_map,
|
|
|
|
+ .set_mem_map = at32_cf_set_mem_map,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init request_pin(struct platform_device *pdev,
|
|
|
|
+ unsigned int pin, const char *name)
|
|
|
|
+{
|
|
|
|
+ if (gpio_request(pin, name)) {
|
|
|
|
+ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
|
|
|
|
+ return -1;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return pin;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct smc_timing at32_cf_timing __initdata = {
|
|
|
|
+ .ncs_read_setup = 30,
|
|
|
|
+ .nrd_setup = 100,
|
|
|
|
+ .ncs_write_setup = 30,
|
|
|
|
+ .nwe_setup = 100,
|
|
|
|
+
|
|
|
|
+ .ncs_read_pulse = 360,
|
|
|
|
+ .nrd_pulse = 290,
|
|
|
|
+ .ncs_write_pulse = 360,
|
|
|
|
+ .nwe_pulse = 290,
|
|
|
|
+
|
|
|
|
+ .read_cycle = 420,
|
|
|
|
+ .write_cycle = 420,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init at32_cf_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf;
|
|
|
|
+ struct cf_platform_data *board = pdev->dev.platform_data;
|
|
|
|
+ struct resource *res_skt;
|
|
|
|
+ int irq;
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ dev_dbg(&pdev->dev, "probe");
|
|
|
|
+
|
|
|
|
+ if (!board)
|
|
|
|
+ return -ENXIO;
|
|
|
|
+
|
|
|
|
+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!res_skt)
|
|
|
|
+ return -ENXIO;
|
|
|
|
+
|
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ if (irq < 0)
|
|
|
|
+ return irq;
|
|
|
|
+
|
|
|
|
+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
|
|
|
|
+ if (!cf)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+
|
|
|
|
+ cf->detect_pin = -1;
|
|
|
|
+ cf->reset_pin = -1;
|
|
|
|
+ cf->vcc_pin = -1;
|
|
|
|
+ cf->ready_pin = -1;
|
|
|
|
+ cf->cf_cs = board->cs;
|
|
|
|
+
|
|
|
|
+ if (board->detect_pin != GPIO_PIN_NONE)
|
|
|
|
+ cf->detect_pin = request_pin(pdev, board->detect_pin,
|
|
|
|
+ "cf_detect");
|
|
|
|
+ if (board->reset_pin != GPIO_PIN_NONE)
|
|
|
|
+ cf->reset_pin = request_pin(pdev, board->reset_pin,
|
|
|
|
+ "cf_reset");
|
|
|
|
+ if (board->vcc_pin != GPIO_PIN_NONE)
|
|
|
|
+ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
|
|
|
|
+ "cf_vcc");
|
|
|
|
+ if (board->ready_pin != GPIO_PIN_NONE)
|
|
|
|
+ /* READY is also used for irq through EIM */
|
|
|
|
+ cf->ready_pin = board->ready_pin;
|
|
|
|
+
|
|
|
|
+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
|
|
|
|
+ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
|
|
|
|
+
|
|
|
|
+ cf->socket.pci_irq = irq;
|
|
|
|
+ cf->socket.ops = &at32_cf_ops;
|
|
|
|
+ cf->socket.resource_ops = &pccard_static_ops;
|
|
|
|
+ cf->socket.dev.parent = &pdev->dev;
|
|
|
|
+ cf->socket.owner = THIS_MODULE;
|
|
|
|
+ cf->socket.features =
|
|
|
|
+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
|
|
|
|
+ cf->socket.map_size = CF_RES_SIZE;
|
|
|
|
+
|
|
|
|
+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
|
|
|
|
+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
|
|
|
|
+ cf->res_attr.name = "attribute";
|
|
|
|
+ cf->res_attr.flags = IORESOURCE_MEM;
|
|
|
|
+ ret = request_resource(res_skt, &cf->res_attr);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err_request_res_attr;
|
|
|
|
+
|
|
|
|
+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
|
|
|
|
+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
|
|
|
|
+ cf->res_mem.name = "memory";
|
|
|
|
+ cf->res_mem.flags = IORESOURCE_MEM;
|
|
|
|
+ ret = request_resource(res_skt, &cf->res_mem);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err_request_res_mem;
|
|
|
|
+
|
|
|
|
+ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
|
|
|
|
+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
|
|
|
|
+ cf->res_io.name = "io";
|
|
|
|
+ cf->res_io.flags = IORESOURCE_MEM;
|
|
|
|
+ ret = request_resource(res_skt, &cf->res_io);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err_request_res_io;
|
|
|
|
+
|
|
|
|
+ cf->socket.io_offset = cf->res_io.start;
|
|
|
|
+
|
|
|
|
+ if (cf->detect_pin >= 0) {
|
|
|
|
+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
|
|
|
|
+ IRQF_SHARED, "cf_detect", cf);
|
|
|
|
+ if (ret) {
|
|
|
|
+ debug(cf, 1,
|
|
|
|
+ "failed to request cf_detect interrupt\n");
|
|
|
|
+ goto err_detect_irq;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ cf->present = at32_cf_present(cf);
|
|
|
|
+
|
|
|
|
+ /* Setup SMC timings */
|
|
|
|
+ smc_set_timing(&cf->smc, &at32_cf_timing);
|
|
|
|
+
|
|
|
|
+ cf->smc.bus_width = 2;
|
|
|
|
+ cf->smc.nrd_controlled = 1;
|
|
|
|
+ cf->smc.nwe_controlled = 1;
|
|
|
|
+ cf->smc.nwait_mode = 0;
|
|
|
|
+ cf->smc.byte_write = 0;
|
|
|
|
+ cf->smc.tdf_cycles = 8;
|
|
|
|
+ cf->smc.tdf_mode = 0;
|
|
|
|
+
|
|
|
|
+ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
|
|
+ if (ret) {
|
|
|
|
+ debug(cf, 1, "failed to configure SMC\n", ret);
|
|
|
|
+ goto err_smc;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ ret = pcmcia_register_socket(&cf->socket);
|
|
|
|
+ if (ret) {
|
|
|
|
+ debug(cf, 1, "failed to register socket: %d\n", ret);
|
|
|
|
+ goto err_register_socket;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (cf->reset_pin >= 0)
|
|
|
|
+ gpio_direction_output(cf->reset_pin, 0);
|
|
|
|
+
|
|
|
|
+ platform_set_drvdata(pdev, cf);
|
|
|
|
+
|
|
|
|
+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
|
|
|
|
+ (unsigned long)res_skt->start);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+err_register_socket:
|
|
|
|
+err_smc:
|
|
|
|
+ if (cf->detect_pin >= 0)
|
|
|
|
+ free_irq(gpio_to_irq(cf->detect_pin), cf);
|
|
|
|
+err_detect_irq:
|
|
|
|
+ release_resource(&cf->res_io);
|
|
|
|
+err_request_res_io:
|
|
|
|
+ release_resource(&cf->res_mem);
|
|
|
|
+err_request_res_mem:
|
|
|
|
+ release_resource(&cf->res_attr);
|
|
|
|
+err_request_res_attr:
|
|
|
|
+ if (cf->vcc_pin >= 0)
|
|
|
|
+ gpio_free(cf->vcc_pin);
|
|
|
|
+ if (cf->reset_pin >= 0)
|
|
|
|
+ gpio_free(cf->reset_pin);
|
|
|
|
+ if (cf->detect_pin >= 0)
|
|
|
|
+ gpio_free(cf->detect_pin);
|
|
|
|
+ kfree(cf);
|
|
|
|
+
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int __exit at32_cf_remove(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
|
|
|
|
+
|
|
|
|
+ pcmcia_unregister_socket(&cf->socket);
|
|
|
|
+ if (cf->detect_pin >= 0) {
|
|
|
|
+ free_irq(gpio_to_irq(cf->detect_pin), cf);
|
|
|
|
+ gpio_free(cf->detect_pin);
|
|
|
|
+ }
|
|
|
|
+ if (cf->vcc_pin >= 0)
|
|
|
|
+ gpio_free(cf->vcc_pin);
|
|
|
|
+ if (cf->reset_pin >= 0)
|
|
|
|
+ gpio_free(cf->reset_pin);
|
|
|
|
+
|
|
|
|
+ release_resource(&cf->res_io);
|
|
|
|
+ release_resource(&cf->res_mem);
|
|
|
|
+ release_resource(&cf->res_attr);
|
|
|
|
+ kfree(cf);
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct platform_driver at32_cf_driver = {
|
|
|
|
+ .remove = __exit_p(at32_cf_remove),
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "at32_cf",
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ },
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init at32_cf_init(void)
|
|
|
|
+{
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
|
|
|
|
+ if (ret)
|
|
|
|
+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit at32_cf_exit(void)
|
|
|
|
+{
|
|
|
|
+ platform_driver_unregister(&at32_cf_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+module_init(at32_cf_init);
|
|
|
|
+module_exit(at32_cf_exit);
|
|
|
|
+
|
|
|
|
+MODULE_LICENSE("GPL");
|
|
|
|
+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
|
|
|
|
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/rtc/rtc-at32ap700x.c
|
|
|
|
+++ b/drivers/rtc/rtc-at32ap700x.c
|
|
|
|
@@ -262,6 +262,7 @@
|
|
|
|
}
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
+ device_init_wakeup(&pdev->dev, 1);
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
|
|
|
|
(unsigned long)rtc->regs, rtc->irq);
|
|
|
|
@@ -281,6 +282,8 @@
|
|
|
|
{
|
|
|
|
struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
|
2008-06-13 00:13:40 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
+ device_init_wakeup(&pdev->dev, 0);
|
|
|
|
+
|
|
|
|
free_irq(rtc->irq, rtc);
|
|
|
|
iounmap(rtc->regs);
|
|
|
|
rtc_device_unregister(rtc->rtc);
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/serial/atmel_serial.c
|
|
|
|
+++ b/drivers/serial/atmel_serial.c
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -957,6 +957,20 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
+ * Flush any TX data submitted for DMA. Called when the TX circular
|
|
|
|
+ * buffer is reset.
|
|
|
|
+ */
|
|
|
|
+static void atmel_flush_buffer(struct uart_port *port)
|
|
|
|
+{
|
|
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
|
|
+
|
|
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
|
|
+ UART_PUT_TCR(port, 0);
|
|
|
|
+ atmel_port->pdc_tx.ofs = 0;
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
* Power / Clock management.
|
|
|
|
*/
|
|
|
|
static void atmel_serial_pm(struct uart_port *port, unsigned int state,
|
|
|
|
@@ -1190,6 +1204,7 @@
|
|
|
|
.break_ctl = atmel_break_ctl,
|
|
|
|
.startup = atmel_startup,
|
|
|
|
.shutdown = atmel_shutdown,
|
|
|
|
+ .flush_buffer = atmel_flush_buffer,
|
|
|
|
.set_termios = atmel_set_termios,
|
|
|
|
.type = atmel_type,
|
|
|
|
.release_port = atmel_release_port,
|
|
|
|
@@ -1440,6 +1455,15 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
+static bool atmel_serial_clk_will_stop(void)
|
|
|
|
+{
|
|
|
|
+#ifdef CONFIG_ARCH_AT91
|
|
|
|
+ return at91_suspend_entering_slow_clock();
|
|
|
|
+#else
|
|
|
|
+ return false;
|
|
|
|
+#endif
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
static int atmel_serial_suspend(struct platform_device *pdev,
|
|
|
|
pm_message_t state)
|
|
|
|
{
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -1447,7 +1471,7 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
|
|
|
|
|
|
if (device_may_wakeup(&pdev->dev)
|
|
|
|
- && !at91_suspend_entering_slow_clock())
|
|
|
|
+ && !atmel_serial_clk_will_stop())
|
|
|
|
enable_irq_wake(port->irq);
|
|
|
|
else {
|
|
|
|
uart_suspend_port(&atmel_uart, port);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/serial/serial_core.c
|
|
|
|
+++ b/drivers/serial/serial_core.c
|
|
|
|
@@ -552,6 +552,8 @@
|
|
|
|
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
uart_circ_clear(&state->info->xmit);
|
|
|
|
+ if (port->ops->flush_buffer)
|
|
|
|
+ port->ops->flush_buffer(port);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
tty_wakeup(tty);
|
|
|
|
}
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/spi/atmel_spi.c
|
|
|
|
+++ b/drivers/spi/atmel_spi.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -51,9 +51,7 @@
|
|
|
|
u8 stopping;
|
|
|
|
struct list_head queue;
|
|
|
|
struct spi_transfer *current_transfer;
|
|
|
|
- unsigned long current_remaining_bytes;
|
|
|
|
- struct spi_transfer *next_transfer;
|
|
|
|
- unsigned long next_remaining_bytes;
|
|
|
|
+ unsigned long remaining_bytes;
|
|
|
|
|
|
|
|
void *buffer;
|
|
|
|
dma_addr_t buffer_dma;
|
|
|
|
@@ -133,48 +131,6 @@
|
|
|
|
gpio_set_value(gpio, !active);
|
|
|
|
}
|
|
|
|
|
|
|
|
-static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
|
|
|
|
- struct spi_transfer *xfer)
|
|
|
|
-{
|
|
|
|
- return msg->transfers.prev == &xfer->transfer_list;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
|
|
|
|
-{
|
|
|
|
- return xfer->delay_usecs == 0 && !xfer->cs_change;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static void atmel_spi_next_xfer_data(struct spi_master *master,
|
|
|
|
- struct spi_transfer *xfer,
|
|
|
|
- dma_addr_t *tx_dma,
|
|
|
|
- dma_addr_t *rx_dma,
|
|
|
|
- u32 *plen)
|
|
|
|
-{
|
|
|
|
- struct atmel_spi *as = spi_master_get_devdata(master);
|
|
|
|
- u32 len = *plen;
|
|
|
|
-
|
|
|
|
- /* use scratch buffer only when rx or tx data is unspecified */
|
|
|
|
- if (xfer->rx_buf)
|
|
|
|
- *rx_dma = xfer->rx_dma + xfer->len - len;
|
|
|
|
- else {
|
|
|
|
- *rx_dma = as->buffer_dma;
|
|
|
|
- if (len > BUFFER_SIZE)
|
|
|
|
- len = BUFFER_SIZE;
|
|
|
|
- }
|
|
|
|
- if (xfer->tx_buf)
|
|
|
|
- *tx_dma = xfer->tx_dma + xfer->len - len;
|
|
|
|
- else {
|
|
|
|
- *tx_dma = as->buffer_dma;
|
|
|
|
- if (len > BUFFER_SIZE)
|
|
|
|
- len = BUFFER_SIZE;
|
|
|
|
- memset(as->buffer, 0, len);
|
|
|
|
- dma_sync_single_for_device(&as->pdev->dev,
|
|
|
|
- as->buffer_dma, len, DMA_TO_DEVICE);
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- *plen = len;
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
/*
|
|
|
|
* Submit next transfer for DMA.
|
|
|
|
* lock is held, spi irq is blocked
|
|
|
|
@@ -184,78 +140,53 @@
|
|
|
|
{
|
|
|
|
struct atmel_spi *as = spi_master_get_devdata(master);
|
|
|
|
struct spi_transfer *xfer;
|
|
|
|
- u32 len, remaining, total;
|
|
|
|
+ u32 len;
|
|
|
|
dma_addr_t tx_dma, rx_dma;
|
|
|
|
|
|
|
|
- if (!as->current_transfer)
|
|
|
|
- xfer = list_entry(msg->transfers.next,
|
|
|
|
- struct spi_transfer, transfer_list);
|
|
|
|
- else if (!as->next_transfer)
|
|
|
|
- xfer = list_entry(as->current_transfer->transfer_list.next,
|
|
|
|
- struct spi_transfer, transfer_list);
|
|
|
|
- else
|
|
|
|
- xfer = NULL;
|
|
|
|
-
|
|
|
|
- if (xfer) {
|
|
|
|
- len = xfer->len;
|
|
|
|
- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
|
|
|
|
- remaining = xfer->len - len;
|
|
|
|
-
|
|
|
|
- spi_writel(as, RPR, rx_dma);
|
|
|
|
- spi_writel(as, TPR, tx_dma);
|
|
|
|
-
|
|
|
|
- if (msg->spi->bits_per_word > 8)
|
|
|
|
- len >>= 1;
|
|
|
|
- spi_writel(as, RCR, len);
|
|
|
|
- spi_writel(as, TCR, len);
|
|
|
|
-
|
|
|
|
- dev_dbg(&msg->spi->dev,
|
|
|
|
- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
|
|
|
|
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
|
|
- xfer->rx_buf, xfer->rx_dma);
|
|
|
|
- } else {
|
|
|
|
- xfer = as->next_transfer;
|
|
|
|
- remaining = as->next_remaining_bytes;
|
|
|
|
+ xfer = as->current_transfer;
|
|
|
|
+ if (!xfer || as->remaining_bytes == 0) {
|
|
|
|
+ if (xfer)
|
|
|
|
+ xfer = list_entry(xfer->transfer_list.next,
|
|
|
|
+ struct spi_transfer, transfer_list);
|
|
|
|
+ else
|
|
|
|
+ xfer = list_entry(msg->transfers.next,
|
|
|
|
+ struct spi_transfer, transfer_list);
|
|
|
|
+ as->remaining_bytes = xfer->len;
|
|
|
|
+ as->current_transfer = xfer;
|
|
|
|
}
|
|
|
|
|
|
|
|
- as->current_transfer = xfer;
|
|
|
|
- as->current_remaining_bytes = remaining;
|
|
|
|
-
|
|
|
|
- if (remaining > 0)
|
|
|
|
- len = remaining;
|
|
|
|
- else if (!atmel_spi_xfer_is_last(msg, xfer)
|
|
|
|
- && atmel_spi_xfer_can_be_chained(xfer)) {
|
|
|
|
- xfer = list_entry(xfer->transfer_list.next,
|
|
|
|
- struct spi_transfer, transfer_list);
|
|
|
|
- len = xfer->len;
|
|
|
|
- } else
|
|
|
|
- xfer = NULL;
|
|
|
|
+ len = as->remaining_bytes;
|
|
|
|
|
|
|
|
- as->next_transfer = xfer;
|
|
|
|
+ tx_dma = xfer->tx_dma + xfer->len - len;
|
|
|
|
+ rx_dma = xfer->rx_dma + xfer->len - len;
|
|
|
|
|
|
|
|
- if (xfer) {
|
|
|
|
- total = len;
|
|
|
|
- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
|
|
|
|
- as->next_remaining_bytes = total - len;
|
|
|
|
-
|
|
|
|
- spi_writel(as, RNPR, rx_dma);
|
|
|
|
- spi_writel(as, TNPR, tx_dma);
|
|
|
|
-
|
|
|
|
- if (msg->spi->bits_per_word > 8)
|
|
|
|
- len >>= 1;
|
|
|
|
- spi_writel(as, RNCR, len);
|
|
|
|
- spi_writel(as, TNCR, len);
|
|
|
|
-
|
|
|
|
- dev_dbg(&msg->spi->dev,
|
|
|
|
- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
|
|
|
|
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
|
|
- xfer->rx_buf, xfer->rx_dma);
|
|
|
|
- } else {
|
|
|
|
- spi_writel(as, RNCR, 0);
|
|
|
|
- spi_writel(as, TNCR, 0);
|
|
|
|
+ /* use scratch buffer only when rx or tx data is unspecified */
|
|
|
|
+ if (!xfer->rx_buf) {
|
|
|
|
+ rx_dma = as->buffer_dma;
|
|
|
|
+ if (len > BUFFER_SIZE)
|
|
|
|
+ len = BUFFER_SIZE;
|
|
|
|
}
|
|
|
|
+ if (!xfer->tx_buf) {
|
|
|
|
+ tx_dma = as->buffer_dma;
|
|
|
|
+ if (len > BUFFER_SIZE)
|
|
|
|
+ len = BUFFER_SIZE;
|
|
|
|
+ memset(as->buffer, 0, len);
|
|
|
|
+ dma_sync_single_for_device(&as->pdev->dev,
|
|
|
|
+ as->buffer_dma, len, DMA_TO_DEVICE);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ spi_writel(as, RPR, rx_dma);
|
|
|
|
+ spi_writel(as, TPR, tx_dma);
|
|
|
|
|
|
|
|
- /* REVISIT: We're waiting for ENDRX before we start the next
|
|
|
|
+ as->remaining_bytes -= len;
|
|
|
|
+ if (msg->spi->bits_per_word > 8)
|
|
|
|
+ len >>= 1;
|
|
|
|
+
|
|
|
|
+ /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
|
|
|
|
+ * mechanism might help avoid the IRQ latency between transfers
|
|
|
|
+ * (and improve the nCS0 errata handling on at91rm9200 chips)
|
|
|
|
+ *
|
|
|
|
+ * We're also waiting for ENDRX before we start the next
|
|
|
|
* transfer because we need to handle some difficult timing
|
|
|
|
* issues otherwise. If we wait for ENDTX in one transfer and
|
|
|
|
* then starts waiting for ENDRX in the next, it's difficult
|
|
|
|
@@ -265,7 +196,17 @@
|
|
|
|
*
|
|
|
|
* It should be doable, though. Just not now...
|
|
|
|
*/
|
|
|
|
+ spi_writel(as, TNCR, 0);
|
|
|
|
+ spi_writel(as, RNCR, 0);
|
|
|
|
spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
|
|
|
|
+
|
|
|
|
+ dev_dbg(&msg->spi->dev,
|
|
|
|
+ " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
|
|
|
|
+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
|
|
+ xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
|
|
|
|
+
|
|
|
|
+ spi_writel(as, RCR, len);
|
|
|
|
+ spi_writel(as, TCR, len);
|
|
|
|
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
|
|
|
|
}
|
|
|
|
|
|
|
|
@@ -363,7 +304,6 @@
|
|
|
|
spin_lock(&as->lock);
|
|
|
|
|
|
|
|
as->current_transfer = NULL;
|
|
|
|
- as->next_transfer = NULL;
|
|
|
|
|
|
|
|
/* continue if needed */
|
|
|
|
if (list_empty(&as->queue) || as->stopping)
|
|
|
|
@@ -447,7 +387,7 @@
|
|
|
|
|
|
|
|
spi_writel(as, IDR, pending);
|
|
|
|
|
|
|
|
- if (as->current_remaining_bytes == 0) {
|
|
|
|
+ if (as->remaining_bytes == 0) {
|
|
|
|
msg->actual_length += xfer->len;
|
|
|
|
|
|
|
|
if (!msg->is_dma_mapped)
|
|
|
|
@@ -457,7 +397,7 @@
|
|
|
|
if (xfer->delay_usecs)
|
|
|
|
udelay(xfer->delay_usecs);
|
|
|
|
|
|
|
|
- if (atmel_spi_xfer_is_last(msg, xfer)) {
|
|
|
|
+ if (msg->transfers.prev == &xfer->transfer_list) {
|
|
|
|
/* report completed message */
|
|
|
|
atmel_spi_msg_done(master, as, msg, 0,
|
|
|
|
xfer->cs_change);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/drivers/usb/gadget/Kconfig
|
|
|
|
+++ b/drivers/usb/gadget/Kconfig
|
|
|
|
@@ -118,10 +118,10 @@
|
|
|
|
config USB_GADGET_ATMEL_USBA
|
|
|
|
boolean "Atmel USBA"
|
|
|
|
select USB_GADGET_DUALSPEED
|
|
|
|
- depends on AVR32
|
|
|
|
+ depends on AVR32 || ARCH_AT91CAP9
|
|
|
|
help
|
|
|
|
USBA is the integrated high-speed USB Device controller on
|
|
|
|
- the AT32AP700x processors from Atmel.
|
|
|
|
+ the AT32AP700x and AT91CAP9 processors from Atmel.
|
|
|
|
|
|
|
|
config USB_ATMEL_USBA
|
|
|
|
tristate
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/drivers/usb/gadget/atmel_usba_udc.c
|
|
|
|
+++ b/drivers/usb/gadget/atmel_usba_udc.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -18,6 +18,7 @@
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
+#include <linux/usb/atmel_usba_udc.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
@@ -27,6 +28,7 @@
|
|
|
|
|
|
|
|
|
|
|
|
static struct usba_udc the_udc;
|
|
|
|
+static struct usba_ep *usba_ep;
|
|
|
|
|
|
|
|
#ifdef CONFIG_USB_GADGET_DEBUG_FS
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
@@ -324,53 +326,28 @@
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
-static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
|
|
|
|
-{
|
|
|
|
- unsigned long tmp;
|
|
|
|
+#if defined(CONFIG_AVR32)
|
|
|
|
|
|
|
|
- DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
|
|
|
|
- for (; len > 0; len -= 4, buf += 4, fifo += 4) {
|
|
|
|
- tmp = *(unsigned long *)buf;
|
|
|
|
- if (len >= 4) {
|
|
|
|
- DBG(DBG_FIFO, " -> %08lx\n", tmp);
|
|
|
|
- __raw_writel(tmp, fifo);
|
|
|
|
- } else {
|
|
|
|
- do {
|
|
|
|
- DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
|
|
|
|
- __raw_writeb(tmp >> 24, fifo);
|
|
|
|
- fifo++;
|
|
|
|
- tmp <<= 8;
|
|
|
|
- } while (--len);
|
|
|
|
- break;
|
|
|
|
- }
|
|
|
|
- }
|
|
|
|
+static void toggle_bias(int is_on)
|
|
|
|
+{
|
|
|
|
}
|
|
|
|
|
|
|
|
-static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
|
|
|
|
+#elif defined(CONFIG_ARCH_AT91)
|
|
|
|
+
|
|
|
|
+#include <asm/arch/at91_pmc.h>
|
|
|
|
+
|
|
|
|
+static void toggle_bias(int is_on)
|
|
|
|
{
|
|
|
|
- union {
|
|
|
|
- unsigned long *w;
|
|
|
|
- unsigned char *b;
|
|
|
|
- } p;
|
|
|
|
- unsigned long tmp;
|
|
|
|
-
|
|
|
|
- DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
|
|
|
|
- for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
|
|
|
|
- if (len >= 4) {
|
|
|
|
- tmp = __raw_readl(fifo);
|
|
|
|
- *p.w = tmp;
|
|
|
|
- DBG(DBG_FIFO, " -> %08lx\n", tmp);
|
|
|
|
- } else {
|
|
|
|
- do {
|
|
|
|
- tmp = __raw_readb(fifo);
|
|
|
|
- *p.b = tmp;
|
|
|
|
- DBG(DBG_FIFO, " -> %02lx\n", tmp);
|
|
|
|
- fifo++, p.b++;
|
|
|
|
- } while (--len);
|
|
|
|
- }
|
|
|
|
- }
|
|
|
|
+ unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
|
|
|
|
+
|
|
|
|
+ if (is_on)
|
|
|
|
+ at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
|
|
|
|
+ else
|
|
|
|
+ at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
|
|
|
|
}
|
|
|
|
|
|
|
|
+#endif /* CONFIG_ARCH_AT91 */
|
|
|
|
+
|
|
|
|
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
|
|
|
|
{
|
|
|
|
unsigned int transaction_len;
|
|
|
|
@@ -387,7 +364,7 @@
|
|
|
|
ep->ep.name, req, transaction_len,
|
|
|
|
req->last_transaction ? ", done" : "");
|
|
|
|
|
|
|
|
- copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
|
|
|
|
+ memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
|
|
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
|
|
req->req.actual += transaction_len;
|
|
|
|
}
|
|
|
|
@@ -476,7 +453,7 @@
|
|
|
|
bytecount = req->req.length - req->req.actual;
|
|
|
|
}
|
|
|
|
|
|
|
|
- copy_from_fifo(req->req.buf + req->req.actual,
|
|
|
|
+ memcpy_fromio(req->req.buf + req->req.actual,
|
|
|
|
ep->fifo, bytecount);
|
|
|
|
req->req.actual += bytecount;
|
|
|
|
|
|
|
|
@@ -1029,33 +1006,6 @@
|
|
|
|
.set_selfpowered = usba_udc_set_selfpowered,
|
|
|
|
};
|
|
|
|
|
|
|
|
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
|
|
|
|
-{ \
|
|
|
|
- .ep = { \
|
|
|
|
- .ops = &usba_ep_ops, \
|
|
|
|
- .name = nam, \
|
|
|
|
- .maxpacket = maxpkt, \
|
|
|
|
- }, \
|
|
|
|
- .udc = &the_udc, \
|
|
|
|
- .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
|
|
|
|
- .fifo_size = maxpkt, \
|
|
|
|
- .nr_banks = maxbk, \
|
|
|
|
- .index = idx, \
|
|
|
|
- .can_dma = dma, \
|
|
|
|
- .can_isoc = isoc, \
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-static struct usba_ep usba_ep[] = {
|
|
|
|
- EP("ep0", 0, 64, 1, 0, 0),
|
|
|
|
- EP("ep1in-bulk", 1, 512, 2, 1, 1),
|
|
|
|
- EP("ep2out-bulk", 2, 512, 2, 1, 1),
|
|
|
|
- EP("ep3in-int", 3, 64, 3, 1, 0),
|
|
|
|
- EP("ep4out-int", 4, 64, 3, 1, 0),
|
|
|
|
- EP("ep5in-iso", 5, 1024, 3, 1, 1),
|
|
|
|
- EP("ep6out-iso", 6, 1024, 3, 1, 1),
|
|
|
|
-};
|
|
|
|
-#undef EP
|
|
|
|
-
|
|
|
|
static struct usb_endpoint_descriptor usba_ep0_desc = {
|
|
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
|
|
@@ -1074,7 +1024,6 @@
|
|
|
|
static struct usba_udc the_udc = {
|
|
|
|
.gadget = {
|
|
|
|
.ops = &usba_udc_ops,
|
|
|
|
- .ep0 = &usba_ep[0].ep,
|
|
|
|
.ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
|
|
|
|
.is_dualspeed = 1,
|
|
|
|
.name = "atmel_usba_udc",
|
|
|
|
@@ -1231,7 +1180,7 @@
|
|
|
|
} else {
|
|
|
|
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
|
|
|
|
usba_writel(udc, TST, USBA_TST_PKT_MODE);
|
|
|
|
- copy_to_fifo(ep->fifo, test_packet_buffer,
|
|
|
|
+ memcpy_toio(ep->fifo, test_packet_buffer,
|
|
|
|
sizeof(test_packet_buffer));
|
|
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
|
|
dev_info(dev, "Entering Test_Packet mode...\n");
|
|
|
|
@@ -1530,13 +1479,13 @@
|
|
|
|
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
|
|
|
|
if (pkt_len != sizeof(crq)) {
|
|
|
|
pr_warning("udc: Invalid packet length %u "
|
|
|
|
- "(expected %lu)\n", pkt_len, sizeof(crq));
|
|
|
|
+ "(expected %zu)\n", pkt_len, sizeof(crq));
|
|
|
|
set_protocol_stall(udc, ep);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
|
|
|
|
- copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
|
|
|
|
+ memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
|
|
|
|
|
|
|
|
/* Free up one bank in the FIFO so that we can
|
|
|
|
* generate or receive a reply right away. */
|
|
|
|
@@ -1688,6 +1637,7 @@
|
|
|
|
DBG(DBG_INT, "irq, status=%#08x\n", status);
|
|
|
|
|
|
|
|
if (status & USBA_DET_SUSPEND) {
|
|
|
|
+ toggle_bias(0);
|
|
|
|
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
|
|
|
|
DBG(DBG_BUS, "Suspend detected\n");
|
|
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN
|
|
|
|
@@ -1699,6 +1649,7 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
if (status & USBA_WAKE_UP) {
|
|
|
|
+ toggle_bias(1);
|
|
|
|
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
|
|
|
|
DBG(DBG_BUS, "Wake Up CPU detected\n");
|
|
|
|
}
|
|
|
|
@@ -1792,12 +1743,14 @@
|
|
|
|
vbus = gpio_get_value(udc->vbus_pin);
|
|
|
|
if (vbus != udc->vbus_prev) {
|
|
|
|
if (vbus) {
|
|
|
|
- usba_writel(udc, CTRL, USBA_EN_USBA);
|
|
|
|
+ toggle_bias(1);
|
|
|
|
+ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
|
|
|
|
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
|
|
|
|
} else {
|
|
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
reset_all_endpoints(udc);
|
|
|
|
- usba_writel(udc, CTRL, 0);
|
|
|
|
+ toggle_bias(0);
|
|
|
|
+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
|
|
|
|
spin_unlock(&udc->lock);
|
|
|
|
udc->driver->disconnect(&udc->gadget);
|
|
|
|
spin_lock(&udc->lock);
|
|
|
|
@@ -1850,7 +1803,8 @@
|
|
|
|
/* If Vbus is present, enable the controller and wait for reset */
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
if (vbus_is_present(udc) && udc->vbus_prev == 0) {
|
|
|
|
- usba_writel(udc, CTRL, USBA_EN_USBA);
|
|
|
|
+ toggle_bias(1);
|
|
|
|
+ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
|
|
|
|
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
@@ -1883,7 +1837,8 @@
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
|
|
|
|
/* This will also disable the DP pullup */
|
|
|
|
- usba_writel(udc, CTRL, 0);
|
|
|
|
+ toggle_bias(0);
|
|
|
|
+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
|
|
|
|
|
|
|
|
driver->unbind(&udc->gadget);
|
|
|
|
udc->gadget.dev.driver = NULL;
|
|
|
|
@@ -1908,7 +1863,7 @@
|
|
|
|
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
|
|
|
|
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
|
|
|
|
- if (!regs || !fifo)
|
|
|
|
+ if (!regs || !fifo || !pdata)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
@@ -1953,19 +1908,48 @@
|
|
|
|
|
|
|
|
/* Make sure we start from a clean slate */
|
|
|
|
clk_enable(pclk);
|
|
|
|
- usba_writel(udc, CTRL, 0);
|
|
|
|
+ toggle_bias(0);
|
|
|
|
+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
|
|
|
|
clk_disable(pclk);
|
|
|
|
|
|
|
|
+ usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
|
|
|
|
+ GFP_KERNEL);
|
|
|
|
+ if (!usba_ep)
|
|
|
|
+ goto err_alloc_ep;
|
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+ the_udc.gadget.ep0 = &usba_ep[0].ep;
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
|
|
|
|
usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
|
|
|
|
usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
|
|
|
|
usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
|
|
|
|
- for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
|
|
|
|
+ usba_ep[0].ep.ops = &usba_ep_ops;
|
|
|
|
+ usba_ep[0].ep.name = pdata->ep[0].name;
|
|
|
|
+ usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
|
|
|
|
+ usba_ep[0].udc = &the_udc;
|
|
|
|
+ INIT_LIST_HEAD(&usba_ep[0].queue);
|
|
|
|
+ usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
|
|
|
|
+ usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
|
|
|
|
+ usba_ep[0].index = pdata->ep[0].index;
|
|
|
|
+ usba_ep[0].can_dma = pdata->ep[0].can_dma;
|
|
|
|
+ usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+ for (i = 1; i < pdata->num_ep; i++) {
|
|
|
|
struct usba_ep *ep = &usba_ep[i];
|
|
|
|
|
|
|
|
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
|
|
|
|
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
|
|
|
|
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
|
|
|
|
+ ep->ep.ops = &usba_ep_ops;
|
|
|
|
+ ep->ep.name = pdata->ep[i].name;
|
|
|
|
+ ep->ep.maxpacket = pdata->ep[i].fifo_size;
|
|
|
|
+ ep->udc = &the_udc;
|
|
|
|
+ INIT_LIST_HEAD(&ep->queue);
|
|
|
|
+ ep->fifo_size = pdata->ep[i].fifo_size;
|
|
|
|
+ ep->nr_banks = pdata->ep[i].nr_banks;
|
|
|
|
+ ep->index = pdata->ep[i].index;
|
|
|
|
+ ep->can_dma = pdata->ep[i].can_dma;
|
|
|
|
+ ep->can_isoc = pdata->ep[i].can_isoc;
|
|
|
|
|
|
|
|
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
|
|
|
|
}
|
|
|
|
@@ -1984,7 +1968,7 @@
|
|
|
|
goto err_device_add;
|
|
|
|
}
|
|
|
|
|
|
|
|
- if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
|
|
|
|
+ if (pdata->vbus_pin >= 0) {
|
|
|
|
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
|
|
|
|
udc->vbus_pin = pdata->vbus_pin;
|
|
|
|
|
|
|
|
@@ -2004,7 +1988,7 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
usba_init_debugfs(udc);
|
|
|
|
- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
|
|
|
|
+ for (i = 1; i < pdata->num_ep; i++)
|
|
|
|
usba_ep_init_debugfs(udc, &usba_ep[i]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
@@ -2012,6 +1996,8 @@
|
|
|
|
err_device_add:
|
|
|
|
free_irq(irq, udc);
|
|
|
|
err_request_irq:
|
|
|
|
+ kfree(usba_ep);
|
|
|
|
+err_alloc_ep:
|
|
|
|
iounmap(udc->fifo);
|
|
|
|
err_map_fifo:
|
|
|
|
iounmap(udc->regs);
|
|
|
|
@@ -2029,10 +2015,11 @@
|
|
|
|
{
|
|
|
|
struct usba_udc *udc;
|
|
|
|
int i;
|
|
|
|
+ struct usba_platform_data *pdata = pdev->dev.platform_data;
|
|
|
|
|
|
|
|
udc = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
|
|
|
|
+ for (i = 1; i < pdata->num_ep; i++)
|
|
|
|
usba_ep_cleanup_debugfs(&usba_ep[i]);
|
|
|
|
usba_cleanup_debugfs(udc);
|
|
|
|
|
|
|
|
@@ -2040,6 +2027,7 @@
|
|
|
|
gpio_free(udc->vbus_pin);
|
|
|
|
|
|
|
|
free_irq(udc->irq, udc);
|
|
|
|
+ kfree(usba_ep);
|
|
|
|
iounmap(udc->fifo);
|
|
|
|
iounmap(udc->regs);
|
|
|
|
clk_put(udc->hclk);
|
|
|
|
--- a/drivers/usb/gadget/atmel_usba_udc.h
|
|
|
|
+++ b/drivers/usb/gadget/atmel_usba_udc.h
|
|
|
|
@@ -41,6 +41,15 @@
|
|
|
|
#define USBA_EN_USBA (1 << 8)
|
|
|
|
#define USBA_DETACH (1 << 9)
|
|
|
|
#define USBA_REMOTE_WAKE_UP (1 << 10)
|
|
|
|
+#define USBA_PULLD_DIS (1 << 11)
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+#if defined(CONFIG_AVR32)
|
|
|
|
+#define USBA_ENABLE_MASK USBA_EN_USBA
|
|
|
|
+#define USBA_DISABLE_MASK 0
|
|
|
|
+#elif defined(CONFIG_ARCH_AT91)
|
|
|
|
+#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
|
|
|
|
+#define USBA_DISABLE_MASK USBA_DETACH
|
|
|
|
+#endif /* CONFIG_ARCH_AT91 */
|
|
|
|
|
|
|
|
/* Bitfields in FNUM */
|
|
|
|
#define USBA_MICRO_FRAME_NUM_OFFSET 0
|
|
|
|
--- a/drivers/video/atmel_lcdfb.c
|
|
|
|
+++ b/drivers/video/atmel_lcdfb.c
|
|
|
|
@@ -38,7 +38,9 @@
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(CONFIG_ARCH_AT91)
|
|
|
|
-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
|
|
|
|
+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
|
|
|
|
+ | FBINFO_PARTIAL_PAN_OK \
|
|
|
|
+ | FBINFO_HWACCEL_YPAN)
|
|
|
|
|
|
|
|
static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
|
|
|
|
struct fb_var_screeninfo *var)
|
|
|
|
@@ -176,7 +178,7 @@
|
|
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
|
|
.visual = FB_VISUAL_TRUECOLOR,
|
|
|
|
.xpanstep = 0,
|
|
|
|
- .ypanstep = 0,
|
|
|
|
+ .ypanstep = 1,
|
|
|
|
.ywrapstep = 0,
|
|
|
|
.accel = FB_ACCEL_NONE,
|
|
|
|
};
|
|
|
|
@@ -250,6 +252,8 @@
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
+ memset(info->screen_base, 0, info->fix.smem_len);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
@@ -634,7 +638,6 @@
|
|
|
|
struct fb_info *info = sinfo->info;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
- memset_io(info->screen_base, 0, info->fix.smem_len);
|
|
|
|
info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
|
|
|
|
|
|
|
|
dev_info(info->device,
|
|
|
|
@@ -764,6 +767,11 @@
|
|
|
|
info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
|
|
|
|
if (!info->screen_base)
|
|
|
|
goto release_intmem;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+ /*
|
|
|
|
+ * Don't clear the framebuffer -- someone may have set
|
|
|
|
+ * up a splash image.
|
|
|
|
+ */
|
|
|
|
} else {
|
|
|
|
/* alocate memory buffer */
|
|
|
|
ret = atmel_lcdfb_alloc_video_memory(sinfo);
|
|
|
|
--- a/fs/fs-writeback.c
|
|
|
|
+++ b/fs/fs-writeback.c
|
|
|
|
@@ -385,8 +385,6 @@
|
|
|
|
* WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so
|
|
|
|
* that it can be located for waiting on in __writeback_single_inode().
|
|
|
|
*
|
|
|
|
- * Called under inode_lock.
|
|
|
|
- *
|
|
|
|
* If `bdi' is non-zero then we're being asked to writeback a specific queue.
|
|
|
|
* This function assumes that the blockdev superblock's inodes are backed by
|
|
|
|
* a variety of queues, so all inodes are searched. For other superblocks,
|
|
|
|
@@ -402,11 +400,12 @@
|
|
|
|
* on the writer throttling path, and we get decent balancing between many
|
|
|
|
* throttled threads: we don't want them all piling up on inode_sync_wait.
|
|
|
|
*/
|
|
|
|
-static void
|
|
|
|
-sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc)
|
|
|
|
+void generic_sync_sb_inodes(struct super_block *sb,
|
|
|
|
+ struct writeback_control *wbc)
|
|
|
|
{
|
|
|
|
const unsigned long start = jiffies; /* livelock avoidance */
|
|
|
|
|
|
|
|
+ spin_lock(&inode_lock);
|
|
|
|
if (!wbc->for_kupdate || list_empty(&sb->s_io))
|
|
|
|
queue_io(sb, wbc->older_than_this);
|
|
|
|
|
|
|
|
@@ -485,8 +484,16 @@
|
|
|
|
if (!list_empty(&sb->s_more_io))
|
|
|
|
wbc->more_io = 1;
|
|
|
|
}
|
|
|
|
+ spin_unlock(&inode_lock);
|
|
|
|
return; /* Leave any unwritten inodes on s_io */
|
|
|
|
}
|
|
|
|
+EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-06-13 01:24:27 +03:00
|
|
|
+static void sync_sb_inodes(struct super_block *sb,
|
|
|
|
+ struct writeback_control *wbc)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-06-13 01:24:27 +03:00
|
|
|
+ generic_sync_sb_inodes(sb, wbc);
|
2008-06-13 00:13:40 +03:00
|
|
|
+}
|
2008-06-13 01:24:27 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Start writeback of dirty pagecache data against all unlocked inodes.
|
|
|
|
@@ -526,11 +533,8 @@
|
|
|
|
* be unmounted by the time it is released.
|
|
|
|
*/
|
|
|
|
if (down_read_trylock(&sb->s_umount)) {
|
|
|
|
- if (sb->s_root) {
|
|
|
|
- spin_lock(&inode_lock);
|
|
|
|
+ if (sb->s_root)
|
|
|
|
sync_sb_inodes(sb, wbc);
|
|
|
|
- spin_unlock(&inode_lock);
|
|
|
|
- }
|
|
|
|
up_read(&sb->s_umount);
|
|
|
|
}
|
|
|
|
spin_lock(&sb_lock);
|
|
|
|
@@ -568,9 +572,7 @@
|
|
|
|
(inodes_stat.nr_inodes - inodes_stat.nr_unused) +
|
|
|
|
nr_dirty + nr_unstable;
|
|
|
|
wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */
|
|
|
|
- spin_lock(&inode_lock);
|
|
|
|
sync_sb_inodes(sb, &wbc);
|
|
|
|
- spin_unlock(&inode_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
--- a/include/asm-avr32/arch-at32ap/board.h
|
|
|
|
+++ b/include/asm-avr32/arch-at32ap/board.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -8,6 +8,12 @@
|
|
|
|
|
|
|
|
#define GPIO_PIN_NONE (-1)
|
|
|
|
|
2008-02-07 22:08:19 +02:00
|
|
|
+/*
|
2008-06-13 00:13:40 +03:00
|
|
|
+ * Clock rates for various on-board oscillators. The number of entries
|
|
|
|
+ * in this array is chip-dependent.
|
2008-02-07 22:08:19 +02:00
|
|
|
+ */
|
2008-06-13 00:13:40 +03:00
|
|
|
+extern unsigned long at32_board_osc_rates[];
|
|
|
|
+
|
|
|
|
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
|
|
|
|
void at32_add_system_devices(void);
|
|
|
|
|
|
|
|
@@ -36,11 +42,10 @@
|
|
|
|
struct atmel_lcdfb_info;
|
|
|
|
struct platform_device *
|
2008-04-23 23:25:37 +03:00
|
|
|
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
|
2008-06-13 00:13:40 +03:00
|
|
|
- unsigned long fbmem_start, unsigned long fbmem_len);
|
|
|
|
+ unsigned long fbmem_start, unsigned long fbmem_len,
|
|
|
|
+ unsigned int pin_config);
|
2008-04-23 23:25:37 +03:00
|
|
|
|
|
|
|
-struct usba_platform_data {
|
|
|
|
- int vbus_pin;
|
|
|
|
-};
|
|
|
|
+struct usba_platform_data;
|
|
|
|
struct platform_device *
|
|
|
|
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -68,9 +73,27 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
struct platform_device *
|
2008-02-07 22:08:19 +02:00
|
|
|
at32_add_device_ssc(unsigned int id, unsigned int flags);
|
|
|
|
|
2008-04-23 23:25:37 +03:00
|
|
|
-struct platform_device *at32_add_device_twi(unsigned int id);
|
2008-02-07 22:08:19 +02:00
|
|
|
-struct platform_device *at32_add_device_mci(unsigned int id);
|
2008-07-05 17:49:07 +03:00
|
|
|
-struct platform_device *at32_add_device_ac97c(unsigned int id);
|
2008-04-23 23:25:37 +03:00
|
|
|
+struct i2c_board_info;
|
|
|
|
+struct platform_device *at32_add_device_twi(unsigned int id,
|
2008-06-13 00:13:40 +03:00
|
|
|
+ struct i2c_board_info *b,
|
|
|
|
+ unsigned int n);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct mci_platform_data {
|
|
|
|
+ int detect_pin;
|
|
|
|
+ int wp_pin;
|
|
|
|
+};
|
|
|
|
+struct platform_device *
|
|
|
|
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
|
2008-07-05 17:49:07 +03:00
|
|
|
+
|
|
|
|
+struct ac97c_platform_data {
|
|
|
|
+ unsigned short dma_rx_periph_id;
|
|
|
|
+ unsigned short dma_tx_periph_id;
|
|
|
|
+ unsigned short dma_controller_id;
|
|
|
|
+ int reset_pin;
|
|
|
|
+};
|
|
|
|
+struct platform_device *
|
|
|
|
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
struct platform_device *at32_add_device_abdac(unsigned int id);
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
struct cf_platform_data {
|
|
|
|
@@ -84,4 +107,20 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
at32_add_device_cf(unsigned int id, unsigned int extint,
|
|
|
|
struct cf_platform_data *data);
|
|
|
|
|
|
|
|
+struct platform_device *
|
|
|
|
+at32_add_device_psif(unsigned int id);
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+/* NAND / SmartMedia */
|
|
|
|
+struct atmel_nand_data {
|
|
|
|
+ int enable_pin; /* chip enable */
|
|
|
|
+ int det_pin; /* card detect */
|
|
|
|
+ int rdy_pin; /* ready/busy */
|
|
|
|
+ u8 ale; /* address line number connected to ALE */
|
|
|
|
+ u8 cle; /* address line number connected to CLE */
|
|
|
|
+ u8 bus_width_16; /* buswidth is 16 bit */
|
|
|
|
+ struct mtd_partition *(*partition_info)(int size, int *num_partitions);
|
|
|
|
+};
|
|
|
|
+struct platform_device *
|
|
|
|
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
#endif /* __ASM_ARCH_BOARD_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/arch-at32ap/init.h
|
|
|
|
+++ b/include/asm-avr32/arch-at32ap/init.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -13,10 +13,6 @@
|
|
|
|
void setup_platform(void);
|
|
|
|
void setup_board(void);
|
|
|
|
|
|
|
|
-/* Called by setup_platform */
|
|
|
|
-void at32_clock_init(void);
|
|
|
|
-void at32_portmux_init(void);
|
|
|
|
-
|
|
|
|
void at32_setup_serial_console(unsigned int usart_id);
|
|
|
|
|
|
|
|
#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/asm-avr32/arch-at32ap/pm.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,51 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
+/*
|
|
|
|
+ * AVR32 AP Power Management.
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2008 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#ifndef __ASM_AVR32_ARCH_PM_H
|
|
|
|
+#define __ASM_AVR32_ARCH_PM_H
|
|
|
|
+
|
|
|
|
+/* Possible arguments to the "sleep" instruction */
|
|
|
|
+#define CPU_SLEEP_IDLE 0
|
|
|
|
+#define CPU_SLEEP_FROZEN 1
|
|
|
|
+#define CPU_SLEEP_STANDBY 2
|
|
|
|
+#define CPU_SLEEP_STOP 3
|
|
|
|
+#define CPU_SLEEP_STATIC 5
|
|
|
|
+
|
|
|
|
+#ifndef __ASSEMBLY__
|
|
|
|
+extern void cpu_enter_idle(void);
|
2008-06-13 00:13:40 +03:00
|
|
|
+extern void cpu_enter_standby(unsigned long sdramc_base);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
+extern bool disable_idle_sleep;
|
|
|
|
+
|
|
|
|
+static inline void cpu_disable_idle_sleep(void)
|
|
|
|
+{
|
|
|
|
+ disable_idle_sleep = true;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static inline void cpu_enable_idle_sleep(void)
|
|
|
|
+{
|
|
|
|
+ disable_idle_sleep = false;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static inline void cpu_idle_sleep(void)
|
|
|
|
+{
|
|
|
|
+ /*
|
|
|
|
+ * If we're using the COUNT and COMPARE registers for
|
|
|
|
+ * timekeeping, we can't use the IDLE state.
|
|
|
|
+ */
|
|
|
|
+ if (disable_idle_sleep)
|
|
|
|
+ cpu_relax();
|
|
|
|
+ else
|
|
|
|
+ cpu_enter_idle();
|
|
|
|
+}
|
2008-06-13 00:13:40 +03:00
|
|
|
+
|
|
|
|
+void intc_set_suspend_handler(unsigned long offset);
|
2008-04-23 23:25:37 +03:00
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+#endif /* __ASM_AVR32_ARCH_PM_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/arch-at32ap/portmux.h
|
|
|
|
+++ b/include/asm-avr32/arch-at32ap/portmux.h
|
2008-05-30 20:24:30 +03:00
|
|
|
@@ -26,4 +26,16 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
void at32_select_gpio(unsigned int pin, unsigned long flags);
|
|
|
|
void at32_reserve_pin(unsigned int pin);
|
|
|
|
|
|
|
|
+#ifdef CONFIG_GPIO_DEV
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/* Gang allocators and accessors; used by the GPIO /dev driver */
|
|
|
|
+int at32_gpio_port_is_valid(unsigned int port);
|
|
|
|
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
|
|
|
|
+void at32_deselect_pins(unsigned int port, u32 pins);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
|
|
|
|
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#endif /* CONFIG_GPIO_DEV */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
#endif /* __ASM_ARCH_PORTMUX_H__ */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/asm-avr32/arch-at32ap/sram.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,30 @@
|
|
|
|
+/*
|
|
|
|
+ * Simple SRAM allocator
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2008 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#ifndef __ASM_AVR32_ARCH_SRAM_H
|
|
|
|
+#define __ASM_AVR32_ARCH_SRAM_H
|
|
|
|
+
|
|
|
|
+#include <linux/genalloc.h>
|
|
|
|
+
|
|
|
|
+extern struct gen_pool *sram_pool;
|
|
|
|
+
|
|
|
|
+static inline unsigned long sram_alloc(size_t len)
|
|
|
|
+{
|
|
|
|
+ if (!sram_pool)
|
|
|
|
+ return 0UL;
|
|
|
|
+
|
|
|
|
+ return gen_pool_alloc(sram_pool, len);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static inline void sram_free(unsigned long addr, size_t len)
|
|
|
|
+{
|
|
|
|
+ return gen_pool_free(sram_pool, addr, len);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#endif /* __ASM_AVR32_ARCH_SRAM_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/arch-at32ap/time.h
|
|
|
|
+++ /dev/null
|
2008-04-23 23:25:37 +03:00
|
|
|
@@ -1,112 +0,0 @@
|
|
|
|
-/*
|
|
|
|
- * Copyright (C) 2007 Atmel Corporation
|
|
|
|
- *
|
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
|
|
- * published by the Free Software Foundation.
|
|
|
|
- */
|
|
|
|
-
|
|
|
|
-#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
|
|
|
|
-#define _ASM_AVR32_ARCH_AT32AP_TIME_H
|
|
|
|
-
|
|
|
|
-#include <linux/platform_device.h>
|
|
|
|
-
|
|
|
|
-extern struct irqaction timer_irqaction;
|
|
|
|
-extern struct platform_device at32_systc0_device;
|
|
|
|
-extern void local_timer_interrupt(int irq, void *dev_id);
|
|
|
|
-
|
|
|
|
-#define TIMER_BCR 0x000000c0
|
|
|
|
-#define TIMER_BCR_SYNC 0
|
|
|
|
-#define TIMER_BMR 0x000000c4
|
|
|
|
-#define TIMER_BMR_TC0XC0S 0
|
|
|
|
-#define TIMER_BMR_TC1XC1S 2
|
|
|
|
-#define TIMER_BMR_TC2XC2S 4
|
|
|
|
-#define TIMER_CCR 0x00000000
|
|
|
|
-#define TIMER_CCR_CLKDIS 1
|
|
|
|
-#define TIMER_CCR_CLKEN 0
|
|
|
|
-#define TIMER_CCR_SWTRG 2
|
|
|
|
-#define TIMER_CMR 0x00000004
|
|
|
|
-#define TIMER_CMR_ABETRG 10
|
|
|
|
-#define TIMER_CMR_ACPA 16
|
|
|
|
-#define TIMER_CMR_ACPC 18
|
|
|
|
-#define TIMER_CMR_AEEVT 20
|
|
|
|
-#define TIMER_CMR_ASWTRG 22
|
|
|
|
-#define TIMER_CMR_BCPB 24
|
|
|
|
-#define TIMER_CMR_BCPC 26
|
|
|
|
-#define TIMER_CMR_BEEVT 28
|
|
|
|
-#define TIMER_CMR_BSWTRG 30
|
|
|
|
-#define TIMER_CMR_BURST 4
|
|
|
|
-#define TIMER_CMR_CLKI 3
|
|
|
|
-#define TIMER_CMR_CPCDIS 7
|
|
|
|
-#define TIMER_CMR_CPCSTOP 6
|
|
|
|
-#define TIMER_CMR_CPCTRG 14
|
|
|
|
-#define TIMER_CMR_EEVT 10
|
|
|
|
-#define TIMER_CMR_EEVTEDG 8
|
|
|
|
-#define TIMER_CMR_ENETRG 12
|
|
|
|
-#define TIMER_CMR_ETRGEDG 8
|
|
|
|
-#define TIMER_CMR_LDBDIS 7
|
|
|
|
-#define TIMER_CMR_LDBSTOP 6
|
|
|
|
-#define TIMER_CMR_LDRA 16
|
|
|
|
-#define TIMER_CMR_LDRB 18
|
|
|
|
-#define TIMER_CMR_TCCLKS 0
|
|
|
|
-#define TIMER_CMR_WAVE 15
|
|
|
|
-#define TIMER_CMR_WAVSEL 13
|
|
|
|
-#define TIMER_CV 0x00000010
|
|
|
|
-#define TIMER_CV_CV 0
|
|
|
|
-#define TIMER_IDR 0x00000028
|
|
|
|
-#define TIMER_IDR_COVFS 0
|
|
|
|
-#define TIMER_IDR_CPAS 2
|
|
|
|
-#define TIMER_IDR_CPBS 3
|
|
|
|
-#define TIMER_IDR_CPCS 4
|
|
|
|
-#define TIMER_IDR_ETRGS 7
|
|
|
|
-#define TIMER_IDR_LDRAS 5
|
|
|
|
-#define TIMER_IDR_LDRBS 6
|
|
|
|
-#define TIMER_IDR_LOVRS 1
|
|
|
|
-#define TIMER_IER 0x00000024
|
|
|
|
-#define TIMER_IER_COVFS 0
|
|
|
|
-#define TIMER_IER_CPAS 2
|
|
|
|
-#define TIMER_IER_CPBS 3
|
|
|
|
-#define TIMER_IER_CPCS 4
|
|
|
|
-#define TIMER_IER_ETRGS 7
|
|
|
|
-#define TIMER_IER_LDRAS 5
|
|
|
|
-#define TIMER_IER_LDRBS 6
|
|
|
|
-#define TIMER_IER_LOVRS 1
|
|
|
|
-#define TIMER_IMR 0x0000002c
|
|
|
|
-#define TIMER_IMR_COVFS 0
|
|
|
|
-#define TIMER_IMR_CPAS 2
|
|
|
|
-#define TIMER_IMR_CPBS 3
|
|
|
|
-#define TIMER_IMR_CPCS 4
|
|
|
|
-#define TIMER_IMR_ETRGS 7
|
|
|
|
-#define TIMER_IMR_LDRAS 5
|
|
|
|
-#define TIMER_IMR_LDRBS 6
|
|
|
|
-#define TIMER_IMR_LOVRS 1
|
|
|
|
-#define TIMER_RA 0x00000014
|
|
|
|
-#define TIMER_RA_RA 0
|
|
|
|
-#define TIMER_RB 0x00000018
|
|
|
|
-#define TIMER_RB_RB 0
|
|
|
|
-#define TIMER_RC 0x0000001c
|
|
|
|
-#define TIMER_RC_RC 0
|
|
|
|
-#define TIMER_SR 0x00000020
|
|
|
|
-#define TIMER_SR_CLKSTA 16
|
|
|
|
-#define TIMER_SR_COVFS 0
|
|
|
|
-#define TIMER_SR_CPAS 2
|
|
|
|
-#define TIMER_SR_CPBS 3
|
|
|
|
-#define TIMER_SR_CPCS 4
|
|
|
|
-#define TIMER_SR_ETRGS 7
|
|
|
|
-#define TIMER_SR_LDRAS 5
|
|
|
|
-#define TIMER_SR_LDRBS 6
|
|
|
|
-#define TIMER_SR_LOVRS 1
|
|
|
|
-#define TIMER_SR_MTIOA 17
|
|
|
|
-#define TIMER_SR_MTIOB 18
|
|
|
|
-
|
|
|
|
-/* Bit manipulation macros */
|
|
|
|
-#define TIMER_BIT(name) (1 << TIMER_##name)
|
|
|
|
-#define TIMER_BF(name,value) ((value) << TIMER_##name)
|
|
|
|
-
|
|
|
|
-/* Register access macros */
|
|
|
|
-#define timer_read(port,instance,reg) \
|
|
|
|
- __raw_readl(port + (0x40 * instance) + TIMER_##reg)
|
|
|
|
-#define timer_write(port,instance,reg,value) \
|
|
|
|
- __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
|
|
|
|
-
|
|
|
|
-#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/asm.h
|
|
|
|
+++ b/include/asm-avr32/asm.h
|
2008-04-23 23:25:37 +03:00
|
|
|
@@ -12,10 +12,10 @@
|
|
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#include <asm/thread_info.h>
|
|
|
|
|
|
|
|
-#define mask_interrupts ssrf SR_GM_BIT
|
|
|
|
-#define mask_exceptions ssrf SR_EM_BIT
|
|
|
|
-#define unmask_interrupts csrf SR_GM_BIT
|
|
|
|
-#define unmask_exceptions csrf SR_EM_BIT
|
|
|
|
+#define mask_interrupts ssrf SYSREG_GM_OFFSET
|
|
|
|
+#define mask_exceptions ssrf SYSREG_EM_OFFSET
|
|
|
|
+#define unmask_interrupts csrf SYSREG_GM_OFFSET
|
|
|
|
+#define unmask_exceptions csrf SYSREG_EM_OFFSET
|
|
|
|
|
|
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
|
|
.macro save_fp
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/asm-avr32/dma-controller.h
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,166 @@
|
|
|
|
+/*
|
|
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
|
|
|
+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
|
|
|
|
+#define __ASM_AVR32_DMA_CONTROLLER_H
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/device.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DMA_DIR_MEM_TO_MEM 0x0000
|
|
|
|
+#define DMA_DIR_MEM_TO_PERIPH 0x0001
|
|
|
|
+#define DMA_DIR_PERIPH_TO_MEM 0x0002
|
|
|
|
+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DMA_WIDTH_8BIT 0
|
|
|
|
+#define DMA_WIDTH_16BIT 1
|
|
|
|
+#define DMA_WIDTH_32BIT 2
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_request {
|
|
|
|
+ struct dma_controller *dmac;
|
|
|
|
+ struct list_head list;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned short channel;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ void (*xfer_complete)(struct dma_request *req);
|
|
|
|
+ void (*block_complete)(struct dma_request *req);
|
|
|
|
+ void (*error)(struct dma_request *req);
|
|
|
|
+};
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_request_sg {
|
|
|
|
+ struct dma_request req;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ int nr_sg;
|
|
|
|
+ struct scatterlist *sg;
|
|
|
|
+ unsigned long block_size;
|
|
|
|
+ unsigned int nr_blocks;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_addr_t data_reg;
|
|
|
|
+ unsigned short periph_id;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned char direction;
|
|
|
|
+ unsigned char width;
|
|
|
|
+};
|
|
|
|
+#define to_dma_request_sg(_req) \
|
|
|
|
+ container_of(_req, struct dma_request_sg, req)
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_request_cyclic {
|
|
|
|
+ struct dma_request req;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ int periods;
|
|
|
|
+ unsigned long buffer_size;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_addr_t buffer_start;
|
|
|
|
+ dma_addr_t data_reg;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned short periph_id;
|
|
|
|
+ unsigned char direction;
|
|
|
|
+ unsigned char width;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ void *dev_id;
|
|
|
|
+};
|
|
|
|
+#define to_dma_request_cyclic(_req) \
|
|
|
|
+ container_of(_req, struct dma_request_cyclic, req)
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_request_memcpy {
|
|
|
|
+ struct dma_request req;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_addr_t src_addr;
|
|
|
|
+ unsigned int src_width;
|
|
|
|
+ unsigned int src_stride;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_addr_t dst_addr;
|
|
|
|
+ unsigned int dst_width;
|
|
|
|
+ unsigned int dst_stride;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ size_t length;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned short src_reverse:1;
|
|
|
|
+ unsigned short dst_reverse:1;
|
|
|
|
+};
|
|
|
|
+#define to_dma_request_memcpy(_req) \
|
|
|
|
+ container_of(_req, struct dma_request_memcpy, req)
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct dma_controller {
|
|
|
|
+ struct list_head list;
|
|
|
|
+ int id;
|
|
|
|
+ struct device *dev;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ int (*alloc_channel)(struct dma_controller *dmac);
|
|
|
|
+ void (*release_channel)(struct dma_controller *dmac,
|
|
|
|
+ int channel);
|
|
|
|
+ int (*prepare_request_sg)(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_sg *req);
|
|
|
|
+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_cyclic *req);
|
|
|
|
+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_memcpy *req);
|
|
|
|
+ int (*start_request)(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel);
|
|
|
|
+ int (*stop_request)(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel);
|
|
|
|
+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel);
|
|
|
|
+};
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_alloc_channel(struct dma_controller *dmac)
|
|
|
|
+{
|
|
|
|
+ return dmac->alloc_channel(dmac);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline void
|
|
|
|
+dma_release_channel(struct dma_controller *dmac, int chan)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dmac->release_channel(dmac, chan);
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_prepare_request_sg(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_sg *req)
|
|
|
|
+{
|
|
|
|
+ return dmac->prepare_request_sg(dmac, req);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_prepare_request_cyclic(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_cyclic *req)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return dmac->prepare_request_cyclic(dmac, req);
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_prepare_request_memcpy(struct dma_controller *dmac,
|
|
|
|
+ struct dma_request_memcpy *req)
|
|
|
|
+{
|
|
|
|
+ return dmac->prepare_request_memcpy(dmac, req);
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_start_request(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel)
|
|
|
|
+{
|
|
|
|
+ return dmac->start_request(dmac, channel);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline int
|
|
|
|
+dma_stop_request(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return dmac->stop_request(dmac, channel);
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline dma_addr_t
|
|
|
|
+dma_get_current_pos(struct dma_controller *dmac,
|
|
|
|
+ unsigned int channel)
|
|
|
|
+{
|
|
|
|
+ return dmac->get_current_pos(dmac, channel);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+extern int register_dma_controller(struct dma_controller *dmac);
|
|
|
|
+extern struct dma_controller *find_dma_controller(int id);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/intc.h
|
|
|
|
+++ /dev/null
|
2008-04-23 23:25:37 +03:00
|
|
|
@@ -1,128 +0,0 @@
|
|
|
|
-#ifndef __ASM_AVR32_INTC_H
|
|
|
|
-#define __ASM_AVR32_INTC_H
|
|
|
|
-
|
|
|
|
-#include <linux/sysdev.h>
|
|
|
|
-#include <linux/interrupt.h>
|
|
|
|
-
|
|
|
|
-struct irq_controller;
|
|
|
|
-struct irqaction;
|
|
|
|
-struct pt_regs;
|
|
|
|
-
|
|
|
|
-struct platform_device;
|
|
|
|
-
|
|
|
|
-/* Information about the internal interrupt controller */
|
|
|
|
-struct intc_device {
|
|
|
|
- /* ioremapped address of configuration block */
|
|
|
|
- void __iomem *regs;
|
|
|
|
-
|
|
|
|
- /* the physical device */
|
|
|
|
- struct platform_device *pdev;
|
|
|
|
-
|
|
|
|
- /* Number of interrupt lines per group. */
|
|
|
|
- unsigned int irqs_per_group;
|
|
|
|
-
|
|
|
|
- /* The highest group ID + 1 */
|
|
|
|
- unsigned int nr_groups;
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * Bitfield indicating which groups are actually in use. The
|
|
|
|
- * size of the array is
|
|
|
|
- * ceil(group_max / (8 * sizeof(unsigned int))).
|
|
|
|
- */
|
|
|
|
- unsigned int group_mask[];
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-struct irq_controller_class {
|
|
|
|
- /*
|
|
|
|
- * A short name identifying this kind of controller.
|
|
|
|
- */
|
|
|
|
- const char *typename;
|
|
|
|
- /*
|
|
|
|
- * Handle the IRQ. Must do any necessary acking and masking.
|
|
|
|
- */
|
|
|
|
- irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
|
|
|
|
- /*
|
|
|
|
- * Register a new IRQ handler.
|
|
|
|
- */
|
|
|
|
- int (*setup)(struct irq_controller *ctrl, unsigned int irq,
|
|
|
|
- struct irqaction *action);
|
|
|
|
- /*
|
|
|
|
- * Unregister a IRQ handler.
|
|
|
|
- */
|
|
|
|
- void (*free)(struct irq_controller *ctrl, unsigned int irq,
|
|
|
|
- void *dev_id);
|
|
|
|
- /*
|
|
|
|
- * Mask the IRQ in the interrupt controller.
|
|
|
|
- */
|
|
|
|
- void (*mask)(struct irq_controller *ctrl, unsigned int irq);
|
|
|
|
- /*
|
|
|
|
- * Unmask the IRQ in the interrupt controller.
|
|
|
|
- */
|
|
|
|
- void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
|
|
|
|
- /*
|
|
|
|
- * Set the type of the IRQ. See below for possible types.
|
|
|
|
- * Return -EINVAL if a given type is not supported
|
|
|
|
- */
|
|
|
|
- int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
|
|
|
|
- unsigned int type);
|
|
|
|
- /*
|
|
|
|
- * Return the IRQ type currently set
|
|
|
|
- */
|
|
|
|
- unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-struct irq_controller {
|
|
|
|
- struct irq_controller_class *class;
|
|
|
|
- unsigned int irq_group;
|
|
|
|
- unsigned int first_irq;
|
|
|
|
- unsigned int nr_irqs;
|
|
|
|
- struct list_head list;
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-struct intc_group_desc {
|
|
|
|
- struct irq_controller *ctrl;
|
|
|
|
- irqreturn_t (*handle)(int, void *, struct pt_regs *);
|
|
|
|
- unsigned long flags;
|
|
|
|
- void *dev_id;
|
|
|
|
- const char *devname;
|
|
|
|
-};
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * The internal interrupt controller. Defined in board/part-specific
|
|
|
|
- * devices.c.
|
|
|
|
- * TODO: Should probably be defined per-cpu.
|
|
|
|
- */
|
|
|
|
-extern struct intc_device intc;
|
|
|
|
-
|
|
|
|
-extern int request_internal_irq(unsigned int irq,
|
|
|
|
- irqreturn_t (*handler)(int, void *, struct pt_regs *),
|
|
|
|
- unsigned long irqflags,
|
|
|
|
- const char *devname, void *dev_id);
|
|
|
|
-extern void free_internal_irq(unsigned int irq);
|
|
|
|
-
|
|
|
|
-/* Only used by time_init() */
|
|
|
|
-extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Set interrupt priority for a given group. `group' can be found by
|
|
|
|
- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
|
|
|
|
- * (highest). Higher-priority interrupts will preempt lower-priority
|
|
|
|
- * interrupts (unless interrupts are masked globally).
|
|
|
|
- *
|
|
|
|
- * This function does not check for conflicts within a group.
|
|
|
|
- */
|
|
|
|
-extern int intc_set_priority(unsigned int group,
|
|
|
|
- unsigned int priority);
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Returns a bitmask of pending interrupts in a group.
|
|
|
|
- */
|
|
|
|
-extern unsigned long intc_get_pending(unsigned int group);
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Register a new external interrupt controller. Returns the first
|
|
|
|
- * external IRQ number that is assigned to the new controller.
|
|
|
|
- */
|
|
|
|
-extern int intc_register_controller(struct irq_controller *ctrl);
|
|
|
|
-
|
|
|
|
-#endif /* __ASM_AVR32_INTC_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/irq.h
|
|
|
|
+++ b/include/asm-avr32/irq.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -14,6 +14,11 @@
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
int nmi_enable(void);
|
|
|
|
void nmi_disable(void);
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Returns a bitmask of pending interrupts in a group.
|
|
|
|
+ */
|
|
|
|
+extern unsigned long intc_get_pending(unsigned int group);
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif /* __ASM_AVR32_IOCTLS_H */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/include/asm-avr32/mmu_context.h
|
|
|
|
+++ b/include/asm-avr32/mmu_context.h
|
|
|
|
@@ -13,7 +13,6 @@
|
|
|
|
#define __ASM_AVR32_MMU_CONTEXT_H
|
|
|
|
|
|
|
|
#include <asm/tlbflush.h>
|
|
|
|
-#include <asm/pgalloc.h>
|
|
|
|
#include <asm/sysreg.h>
|
|
|
|
#include <asm-generic/mm_hooks.h>
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/page.h
|
|
|
|
+++ b/include/asm-avr32/page.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -8,13 +8,11 @@
|
|
|
|
#ifndef __ASM_AVR32_PAGE_H
|
|
|
|
#define __ASM_AVR32_PAGE_H
|
|
|
|
|
|
|
|
+#include <linux/const.h>
|
|
|
|
+
|
|
|
|
/* PAGE_SHIFT determines the page size */
|
|
|
|
#define PAGE_SHIFT 12
|
|
|
|
-#ifdef __ASSEMBLY__
|
|
|
|
-#define PAGE_SIZE (1 << PAGE_SHIFT)
|
|
|
|
-#else
|
|
|
|
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
|
|
|
|
-#endif
|
|
|
|
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
|
|
|
|
#define PAGE_MASK (~(PAGE_SIZE-1))
|
|
|
|
#define PTE_MASK PAGE_MASK
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/pci.h
|
|
|
|
+++ b/include/asm-avr32/pci.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -5,4 +5,6 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
#define PCI_DMA_BUS_IS_PHYS (1)
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm-generic/pci-dma-compat.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
#endif /* __ASM_AVR32_PCI_H__ */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/include/asm-avr32/pgalloc.h
|
|
|
|
+++ b/include/asm-avr32/pgalloc.h
|
|
|
|
@@ -8,65 +8,79 @@
|
|
|
|
#ifndef __ASM_AVR32_PGALLOC_H
|
|
|
|
#define __ASM_AVR32_PGALLOC_H
|
|
|
|
|
|
|
|
-#include <asm/processor.h>
|
|
|
|
-#include <linux/threads.h>
|
|
|
|
-#include <linux/slab.h>
|
|
|
|
-#include <linux/mm.h>
|
|
|
|
+#include <linux/quicklist.h>
|
|
|
|
+#include <asm/page.h>
|
|
|
|
+#include <asm/pgtable.h>
|
|
|
|
|
|
|
|
-#define pmd_populate_kernel(mm, pmd, pte) \
|
|
|
|
- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
|
|
|
|
+#define QUICK_PGD 0 /* Preserve kernel mappings over free */
|
|
|
|
+#define QUICK_PT 1 /* Zero on free */
|
|
|
|
|
|
|
|
-static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
|
|
|
|
+static inline void pmd_populate_kernel(struct mm_struct *mm,
|
|
|
|
+ pmd_t *pmd, pte_t *pte)
|
|
|
|
+{
|
|
|
|
+ set_pmd(pmd, __pmd((unsigned long)pte));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
|
|
|
|
pgtable_t pte)
|
|
|
|
{
|
|
|
|
- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
|
|
|
|
+ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
|
|
|
|
}
|
|
|
|
#define pmd_pgtable(pmd) pmd_page(pmd)
|
|
|
|
|
|
|
|
+static inline void pgd_ctor(void *x)
|
|
|
|
+{
|
|
|
|
+ pgd_t *pgd = x;
|
|
|
|
+
|
|
|
|
+ memcpy(pgd + USER_PTRS_PER_PGD,
|
|
|
|
+ swapper_pg_dir + USER_PTRS_PER_PGD,
|
|
|
|
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
/*
|
|
|
|
* Allocate and free page tables
|
|
|
|
*/
|
|
|
|
-static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
|
|
|
|
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
- return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
|
|
|
|
+ return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
|
|
|
|
{
|
|
|
|
- kfree(pgd);
|
|
|
|
+ quicklist_free(QUICK_PGD, NULL, pgd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
- pte_t *pte;
|
|
|
|
-
|
|
|
|
- pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
|
|
|
|
-
|
|
|
|
- return pte;
|
|
|
|
+ return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
|
|
|
|
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
- struct page *pte;
|
|
|
|
+ struct page *page;
|
|
|
|
+ void *pg;
|
|
|
|
|
|
|
|
- pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
|
|
|
|
- if (!pte)
|
|
|
|
+ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
|
|
|
|
+ if (!pg)
|
|
|
|
return NULL;
|
|
|
|
- pgtable_page_ctor(pte);
|
|
|
|
- return pte;
|
|
|
|
+
|
|
|
|
+ page = virt_to_page(pg);
|
|
|
|
+ pgtable_page_ctor(page);
|
|
|
|
+
|
|
|
|
+ return page;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
|
|
|
|
{
|
|
|
|
- free_page((unsigned long)pte);
|
|
|
|
+ quicklist_free(QUICK_PT, NULL, pte);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
|
|
|
|
{
|
|
|
|
pgtable_page_dtor(pte);
|
|
|
|
- __free_page(pte);
|
|
|
|
+ quicklist_free_page(QUICK_PT, NULL, pte);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define __pte_free_tlb(tlb,pte) \
|
|
|
|
@@ -75,6 +89,10 @@
|
|
|
|
tlb_remove_page((tlb), pte); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
-#define check_pgt_cache() do { } while(0)
|
|
|
|
+static inline void check_pgt_cache(void)
|
|
|
|
+{
|
|
|
|
+ quicklist_trim(QUICK_PGD, NULL, 25, 16);
|
|
|
|
+ quicklist_trim(QUICK_PT, NULL, 25, 16);
|
|
|
|
+}
|
|
|
|
|
|
|
|
#endif /* __ASM_AVR32_PGALLOC_H */
|
|
|
|
--- a/include/asm-avr32/pgtable.h
|
|
|
|
+++ b/include/asm-avr32/pgtable.h
|
|
|
|
@@ -129,13 +129,6 @@
|
|
|
|
|
|
|
|
#define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
|
|
|
|
|
|
|
|
-/* TODO: Check for saneness */
|
|
|
|
-/* User-mode page table flags (to be set in a pgd or pmd entry) */
|
|
|
|
-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
|
|
|
|
- | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
|
|
|
|
-/* Kernel-mode page table flags */
|
|
|
|
-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
|
|
|
|
- | _PAGE_ACCESSED | _PAGE_DIRTY)
|
|
|
|
/* Flags that may be modified by software */
|
|
|
|
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
|
|
|
|
| _PAGE_FLAGS_CACHE_MASK)
|
|
|
|
@@ -254,10 +247,14 @@
|
|
|
|
}
|
|
|
|
|
|
|
|
#define pmd_none(x) (!pmd_val(x))
|
|
|
|
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
|
|
|
|
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
|
|
|
|
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \
|
|
|
|
- != _KERNPG_TABLE)
|
|
|
|
+#define pmd_present(x) (pmd_val(x))
|
|
|
|
+
|
|
|
|
+static inline void pmd_clear(pmd_t *pmdp)
|
|
|
|
+{
|
|
|
|
+ set_pmd(pmdp, __pmd(0));
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Permanent address of a page. We don't support highmem, so this is
|
|
|
|
@@ -295,19 +292,16 @@
|
|
|
|
|
|
|
|
#define page_pte(page) page_pte_prot(page, __pgprot(0))
|
|
|
|
|
|
|
|
-#define pmd_page_vaddr(pmd) \
|
|
|
|
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
|
|
|
|
-
|
|
|
|
-#define pmd_page(pmd) (phys_to_page(pmd_val(pmd)))
|
|
|
|
+#define pmd_page_vaddr(pmd) pmd_val(pmd)
|
|
|
|
+#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
|
|
|
|
|
|
|
|
/* to find an entry in a page-table-directory. */
|
|
|
|
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
|
|
|
|
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
|
|
|
|
-#define pgd_offset_current(address) \
|
|
|
|
- ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
|
|
|
|
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) \
|
|
|
|
+ & (PTRS_PER_PGD - 1))
|
|
|
|
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
|
|
|
|
|
|
|
|
/* to find an entry in a kernel page-table-directory */
|
|
|
|
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
|
|
|
|
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
|
|
|
|
|
|
|
|
/* Find an entry in the third-level page table.. */
|
|
|
|
#define pte_index(address) \
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/asm-avr32/serial.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,13 @@
|
|
|
|
+#ifndef _ASM_SERIAL_H
|
|
|
|
+#define _ASM_SERIAL_H
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+/*
|
|
|
|
+ * This assumes you have a 1.8432 MHz clock for your UART.
|
|
|
|
+ *
|
|
|
|
+ * It'd be nice if someone built a serial card with a 24.576 MHz
|
|
|
|
+ * clock, since the 16550A is capable of handling a top speed of 1.5
|
|
|
|
+ * megabits/second; but this requires the faster clock.
|
|
|
|
+ */
|
|
|
|
+#define BASE_BAUD (1843200 / 16)
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#endif /* _ASM_SERIAL_H */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/asm-avr32/thread_info.h
|
|
|
|
+++ b/include/asm-avr32/thread_info.h
|
2008-05-30 20:24:30 +03:00
|
|
|
@@ -88,6 +88,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
#define TIF_MEMDIE 6
|
|
|
|
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
|
|
|
|
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
|
2008-06-13 00:13:40 +03:00
|
|
|
+#define TIF_FREEZE 29
|
|
|
|
#define TIF_DEBUG 30 /* debugging enabled */
|
2008-02-07 22:08:19 +02:00
|
|
|
#define TIF_USERSPACE 31 /* true if FS sets userspace */
|
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/include/asm-avr32/tlbflush.h
|
|
|
|
+++ b/include/asm-avr32/tlbflush.h
|
|
|
|
@@ -26,7 +26,6 @@
|
|
|
|
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
|
|
|
|
unsigned long end);
|
|
|
|
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
|
|
|
|
-extern void __flush_tlb_page(unsigned long asid, unsigned long page);
|
|
|
|
|
|
|
|
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
|
|
|
|
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/asm-avr32/xor.h
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -0,0 +1,6 @@
|
|
|
|
+#ifndef _ASM_XOR_H
|
|
|
|
+#define _ASM_XOR_H
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
2008-06-13 00:13:40 +03:00
|
|
|
+#include <asm-generic/xor.h>
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
|
|
|
+#endif
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/linux/atmel_tc.h
|
2008-04-23 23:25:37 +03:00
|
|
|
@@ -0,0 +1,252 @@
|
|
|
|
+/*
|
|
|
|
+ * Timer/Counter Unit (TC) registers.
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
|
|
+ * (at your option) any later version.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#ifndef ATMEL_TC_H
|
|
|
|
+#define ATMEL_TC_H
|
|
|
|
+
|
|
|
|
+#include <linux/compiler.h>
|
|
|
|
+#include <linux/list.h>
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
|
|
|
|
+ * three general-purpose 16-bit timers. These timers share one register bank.
|
|
|
|
+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
|
|
|
|
+ * may be shared by the whole TC block.
|
|
|
|
+ *
|
|
|
|
+ * These TC blocks may have up to nine external pins: TCLK0..2 signals for
|
|
|
|
+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
|
|
|
|
+ * or triggering. Those pins need to be set up for use with the TC block,
|
|
|
|
+ * else they will be used as GPIOs or for a different controller.
|
|
|
|
+ *
|
|
|
|
+ * Although we expect each TC block to have a platform_device node, those
|
|
|
|
+ * nodes are not what drivers bind to. Instead, they ask for a specific
|
|
|
|
+ * TC block, by number ... which is a common approach on systems with many
|
|
|
|
+ * timers. Then they use clk_get() and platform_get_irq() to get clock and
|
|
|
|
+ * IRQ resources.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+struct clk;
|
|
|
|
+
|
|
|
|
+/**
|
|
|
|
+ * struct atmel_tc - information about a Timer/Counter Block
|
|
|
|
+ * @pdev: physical device
|
|
|
|
+ * @iomem: resource associated with the I/O register
|
|
|
|
+ * @regs: mapping through which the I/O registers can be accessed
|
|
|
|
+ * @irq: irq for each of the three channels
|
|
|
|
+ * @clk: internal clock source for each of the three channels
|
|
|
|
+ * @node: list node, for tclib internal use
|
|
|
|
+ *
|
|
|
|
+ * On some platforms, each TC channel has its own clocks and IRQs,
|
|
|
|
+ * while on others, all TC channels share the same clock and IRQ.
|
|
|
|
+ * Drivers should clk_enable() all the clocks they need even though
|
|
|
|
+ * all the entries in @clk may point to the same physical clock.
|
|
|
|
+ * Likewise, drivers should request irqs independently for each
|
|
|
|
+ * channel, but they must use IRQF_SHARED in case some of the entries
|
|
|
|
+ * in @irq are actually the same IRQ.
|
|
|
|
+ */
|
|
|
|
+struct atmel_tc {
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+ struct resource *iomem;
|
|
|
|
+ void __iomem *regs;
|
|
|
|
+ int irq[3];
|
|
|
|
+ struct clk *clk[3];
|
|
|
|
+ struct list_head node;
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
|
|
|
|
+extern void atmel_tc_free(struct atmel_tc *tc);
|
|
|
|
+
|
|
|
|
+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
|
|
|
|
+extern const u8 atmel_tc_divisors[5];
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Two registers have block-wide controls. These are: configuring the three
|
|
|
|
+ * "external" clocks (or event sources) used by the timer channels; and
|
|
|
|
+ * synchronizing the timers by resetting them all at once.
|
|
|
|
+ *
|
|
|
|
+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
|
|
|
|
+ * signals. Or, it can mean "external to timer", using the TIOA output from
|
|
|
|
+ * one of the other two timers that's being run in waveform mode.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */
|
|
|
|
+#define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */
|
|
|
|
+#define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */
|
|
|
|
+#define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0)
|
|
|
|
+#define ATMEL_TC_TC0XC0S_NONE (1 << 0)
|
|
|
|
+#define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0)
|
|
|
|
+#define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0)
|
|
|
|
+#define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */
|
|
|
|
+#define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2)
|
|
|
|
+#define ATMEL_TC_TC1XC1S_NONE (1 << 2)
|
|
|
|
+#define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2)
|
|
|
|
+#define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2)
|
|
|
|
+#define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */
|
|
|
|
+#define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4)
|
|
|
|
+#define ATMEL_TC_TC2XC2S_NONE (1 << 4)
|
|
|
|
+#define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4)
|
|
|
|
+#define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4)
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Each TC block has three "channels", each with one counter and controls.
|
|
|
|
+ *
|
|
|
|
+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
|
|
|
|
+ * when it's not "external") is silicon-specific. AT91 platforms use one
|
|
|
|
+ * set of definitions; AVR32 platforms use a different set. Don't hard-wire
|
|
|
|
+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
|
|
|
|
+ * where index N is the divisor for clock N+1, else zero to indicate it uses
|
|
|
|
+ * the 32 KiHz clock.
|
|
|
|
+ *
|
|
|
|
+ * The timers can be chained in various ways, and operated in "waveform"
|
|
|
|
+ * generation mode (including PWM) or "capture" mode (to time events). In
|
|
|
|
+ * both modes, behavior can be configured in many ways.
|
|
|
|
+ *
|
|
|
|
+ * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a
|
|
|
|
+ * PWM output, and TIOB as either another PWM or as a trigger. Capture mode
|
|
|
|
+ * uses them only as inputs.
|
|
|
|
+ */
|
|
|
|
+#define ATMEL_TC_CHAN(idx) ((idx)*0x40)
|
|
|
|
+#define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_CCR 0x00 /* Channel Control Register */
|
|
|
|
+#define ATMEL_TC_CLKEN (1 << 0) /* clock enable */
|
|
|
|
+#define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */
|
|
|
|
+#define ATMEL_TC_SWTRG (1 << 2) /* software trigger */
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_CMR 0x04 /* Channel Mode Register */
|
|
|
|
+
|
|
|
|
+/* Both modes share some CMR bits */
|
|
|
|
+#define ATMEL_TC_TCCLKS (7 << 0) /* clock source */
|
|
|
|
+#define ATMEL_TC_TIMER_CLOCK1 (0 << 0)
|
|
|
|
+#define ATMEL_TC_TIMER_CLOCK2 (1 << 0)
|
|
|
|
+#define ATMEL_TC_TIMER_CLOCK3 (2 << 0)
|
|
|
|
+#define ATMEL_TC_TIMER_CLOCK4 (3 << 0)
|
|
|
|
+#define ATMEL_TC_TIMER_CLOCK5 (4 << 0)
|
|
|
|
+#define ATMEL_TC_XC0 (5 << 0)
|
|
|
|
+#define ATMEL_TC_XC1 (6 << 0)
|
|
|
|
+#define ATMEL_TC_XC2 (7 << 0)
|
|
|
|
+#define ATMEL_TC_CLKI (1 << 3) /* clock invert */
|
|
|
|
+#define ATMEL_TC_BURST (3 << 4) /* clock gating */
|
|
|
|
+#define ATMEL_TC_GATE_NONE (0 << 4)
|
|
|
|
+#define ATMEL_TC_GATE_XC0 (1 << 4)
|
|
|
|
+#define ATMEL_TC_GATE_XC1 (2 << 4)
|
|
|
|
+#define ATMEL_TC_GATE_XC2 (3 << 4)
|
|
|
|
+#define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */
|
|
|
|
+
|
|
|
|
+/* CAPTURE mode CMR bits */
|
|
|
|
+#define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */
|
|
|
|
+#define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */
|
|
|
|
+#define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */
|
|
|
|
+#define ATMEL_TC_ETRGEDG_NONE (0 << 8)
|
|
|
|
+#define ATMEL_TC_ETRGEDG_RISING (1 << 8)
|
|
|
|
+#define ATMEL_TC_ETRGEDG_FALLING (2 << 8)
|
|
|
|
+#define ATMEL_TC_ETRGEDG_BOTH (3 << 8)
|
|
|
|
+#define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */
|
|
|
|
+#define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */
|
|
|
|
+#define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */
|
|
|
|
+#define ATMEL_TC_LDRA_NONE (0 << 16)
|
|
|
|
+#define ATMEL_TC_LDRA_RISING (1 << 16)
|
|
|
|
+#define ATMEL_TC_LDRA_FALLING (2 << 16)
|
|
|
|
+#define ATMEL_TC_LDRA_BOTH (3 << 16)
|
|
|
|
+#define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */
|
|
|
|
+#define ATMEL_TC_LDRB_NONE (0 << 18)
|
|
|
|
+#define ATMEL_TC_LDRB_RISING (1 << 18)
|
|
|
|
+#define ATMEL_TC_LDRB_FALLING (2 << 18)
|
|
|
|
+#define ATMEL_TC_LDRB_BOTH (3 << 18)
|
|
|
|
+
|
|
|
|
+/* WAVEFORM mode CMR bits */
|
|
|
|
+#define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */
|
|
|
|
+#define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */
|
|
|
|
+#define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */
|
|
|
|
+#define ATMEL_TC_EEVTEDG_NONE (0 << 8)
|
|
|
|
+#define ATMEL_TC_EEVTEDG_RISING (1 << 8)
|
|
|
|
+#define ATMEL_TC_EEVTEDG_FALLING (2 << 8)
|
|
|
|
+#define ATMEL_TC_EEVTEDG_BOTH (3 << 8)
|
|
|
|
+#define ATMEL_TC_EEVT (3 << 10) /* external event source */
|
|
|
|
+#define ATMEL_TC_EEVT_TIOB (0 << 10)
|
|
|
|
+#define ATMEL_TC_EEVT_XC0 (1 << 10)
|
|
|
|
+#define ATMEL_TC_EEVT_XC1 (2 << 10)
|
|
|
|
+#define ATMEL_TC_EEVT_XC2 (3 << 10)
|
|
|
|
+#define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */
|
|
|
|
+#define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */
|
|
|
|
+#define ATMEL_TC_WAVESEL_UP (0 << 13)
|
|
|
|
+#define ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
|
|
|
|
+#define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13)
|
|
|
|
+#define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
|
|
|
|
+#define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */
|
|
|
|
+#define ATMEL_TC_ACPA_NONE (0 << 16)
|
|
|
|
+#define ATMEL_TC_ACPA_SET (1 << 16)
|
|
|
|
+#define ATMEL_TC_ACPA_CLEAR (2 << 16)
|
|
|
|
+#define ATMEL_TC_ACPA_TOGGLE (3 << 16)
|
|
|
|
+#define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */
|
|
|
|
+#define ATMEL_TC_ACPC_NONE (0 << 18)
|
|
|
|
+#define ATMEL_TC_ACPC_SET (1 << 18)
|
|
|
|
+#define ATMEL_TC_ACPC_CLEAR (2 << 18)
|
|
|
|
+#define ATMEL_TC_ACPC_TOGGLE (3 << 18)
|
|
|
|
+#define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */
|
|
|
|
+#define ATMEL_TC_AEEVT_NONE (0 << 20)
|
|
|
|
+#define ATMEL_TC_AEEVT_SET (1 << 20)
|
|
|
|
+#define ATMEL_TC_AEEVT_CLEAR (2 << 20)
|
|
|
|
+#define ATMEL_TC_AEEVT_TOGGLE (3 << 20)
|
|
|
|
+#define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */
|
|
|
|
+#define ATMEL_TC_ASWTRG_NONE (0 << 22)
|
|
|
|
+#define ATMEL_TC_ASWTRG_SET (1 << 22)
|
|
|
|
+#define ATMEL_TC_ASWTRG_CLEAR (2 << 22)
|
|
|
|
+#define ATMEL_TC_ASWTRG_TOGGLE (3 << 22)
|
|
|
|
+#define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */
|
|
|
|
+#define ATMEL_TC_BCPB_NONE (0 << 24)
|
|
|
|
+#define ATMEL_TC_BCPB_SET (1 << 24)
|
|
|
|
+#define ATMEL_TC_BCPB_CLEAR (2 << 24)
|
|
|
|
+#define ATMEL_TC_BCPB_TOGGLE (3 << 24)
|
|
|
|
+#define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */
|
|
|
|
+#define ATMEL_TC_BCPC_NONE (0 << 26)
|
|
|
|
+#define ATMEL_TC_BCPC_SET (1 << 26)
|
|
|
|
+#define ATMEL_TC_BCPC_CLEAR (2 << 26)
|
|
|
|
+#define ATMEL_TC_BCPC_TOGGLE (3 << 26)
|
|
|
|
+#define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */
|
|
|
|
+#define ATMEL_TC_BEEVT_NONE (0 << 28)
|
|
|
|
+#define ATMEL_TC_BEEVT_SET (1 << 28)
|
|
|
|
+#define ATMEL_TC_BEEVT_CLEAR (2 << 28)
|
|
|
|
+#define ATMEL_TC_BEEVT_TOGGLE (3 << 28)
|
|
|
|
+#define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */
|
|
|
|
+#define ATMEL_TC_BSWTRG_NONE (0 << 30)
|
|
|
|
+#define ATMEL_TC_BSWTRG_SET (1 << 30)
|
|
|
|
+#define ATMEL_TC_BSWTRG_CLEAR (2 << 30)
|
|
|
|
+#define ATMEL_TC_BSWTRG_TOGGLE (3 << 30)
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_CV 0x10 /* counter Value */
|
|
|
|
+#define ATMEL_TC_RA 0x14 /* register A */
|
|
|
|
+#define ATMEL_TC_RB 0x18 /* register B */
|
|
|
|
+#define ATMEL_TC_RC 0x1c /* register C */
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_SR 0x20 /* status (read-only) */
|
|
|
|
+/* Status-only flags */
|
|
|
|
+#define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */
|
|
|
|
+#define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */
|
|
|
|
+#define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */
|
|
|
|
+
|
|
|
|
+#define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */
|
|
|
|
+#define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */
|
|
|
|
+#define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */
|
|
|
|
+
|
|
|
|
+/* Status and IRQ flags */
|
|
|
|
+#define ATMEL_TC_COVFS (1 << 0) /* counter overflow */
|
|
|
|
+#define ATMEL_TC_LOVRS (1 << 1) /* load overrun */
|
|
|
|
+#define ATMEL_TC_CPAS (1 << 2) /* RA compare */
|
|
|
|
+#define ATMEL_TC_CPBS (1 << 3) /* RB compare */
|
|
|
|
+#define ATMEL_TC_CPCS (1 << 4) /* RC compare */
|
|
|
|
+#define ATMEL_TC_LDRAS (1 << 5) /* RA loading */
|
|
|
|
+#define ATMEL_TC_LDRBS (1 << 6) /* RB loading */
|
|
|
|
+#define ATMEL_TC_ETRGS (1 << 7) /* external trigger */
|
|
|
|
+
|
|
|
|
+#endif
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/include/linux/fs.h
|
|
|
|
+++ b/include/linux/fs.h
|
2008-07-26 13:53:23 +03:00
|
|
|
@@ -1692,6 +1692,8 @@
|
2008-06-13 00:13:40 +03:00
|
|
|
extern int invalidate_inode_pages2(struct address_space *mapping);
|
|
|
|
extern int invalidate_inode_pages2_range(struct address_space *mapping,
|
|
|
|
pgoff_t start, pgoff_t end);
|
|
|
|
+extern void generic_sync_sb_inodes(struct super_block *sb,
|
|
|
|
+ struct writeback_control *wbc);
|
|
|
|
extern int write_inode_now(struct inode *, int);
|
|
|
|
extern int filemap_fdatawrite(struct address_space *);
|
|
|
|
extern int filemap_flush(struct address_space *);
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/include/linux/serial_core.h
|
|
|
|
+++ b/include/linux/serial_core.h
|
|
|
|
@@ -188,6 +188,7 @@
|
|
|
|
void (*break_ctl)(struct uart_port *, int ctl);
|
|
|
|
int (*startup)(struct uart_port *);
|
|
|
|
void (*shutdown)(struct uart_port *);
|
|
|
|
+ void (*flush_buffer)(struct uart_port *);
|
|
|
|
void (*set_termios)(struct uart_port *, struct ktermios *new,
|
|
|
|
struct ktermios *old);
|
|
|
|
void (*pm)(struct uart_port *, unsigned int state,
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/include/linux/usb/atmel_usba_udc.h
|
2008-04-23 23:25:37 +03:00
|
|
|
@@ -0,0 +1,22 @@
|
|
|
|
+/*
|
|
|
|
+ * Platform data definitions for Atmel USBA gadget driver.
|
|
|
|
+ */
|
|
|
|
+#ifndef __LINUX_USB_USBA_H
|
|
|
|
+#define __LINUX_USB_USBA_H
|
|
|
|
+
|
|
|
|
+struct usba_ep_data {
|
|
|
|
+ char *name;
|
|
|
|
+ int index;
|
|
|
|
+ int fifo_size;
|
|
|
|
+ int nr_banks;
|
|
|
|
+ int can_dma;
|
|
|
|
+ int can_isoc;
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+struct usba_platform_data {
|
|
|
|
+ int vbus_pin;
|
|
|
|
+ int num_ep;
|
|
|
|
+ struct usba_ep_data ep[0];
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+#endif /* __LINUX_USB_USBA_H */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/mm/Kconfig
|
|
|
|
+++ b/mm/Kconfig
|
|
|
|
@@ -187,7 +187,7 @@
|
|
|
|
config NR_QUICK
|
|
|
|
int
|
|
|
|
depends on QUICKLIST
|
|
|
|
- default "2" if SUPERH
|
|
|
|
+ default "2" if SUPERH || AVR32
|
|
|
|
default "1"
|
|
|
|
|
|
|
|
config VIRT_TO_BUS
|
|
|
|
--- a/sound/Kconfig
|
|
|
|
+++ b/sound/Kconfig
|
|
|
|
@@ -63,6 +63,8 @@
|
|
|
|
|
|
|
|
source "sound/arm/Kconfig"
|
|
|
|
|
|
|
|
+source "sound/avr32/Kconfig"
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
if SPI
|
|
|
|
source "sound/spi/Kconfig"
|
|
|
|
endif
|
|
|
|
--- a/sound/Makefile
|
|
|
|
+++ b/sound/Makefile
|
|
|
|
@@ -6,7 +6,7 @@
|
|
|
|
obj-$(CONFIG_SOUND_PRIME) += oss/
|
|
|
|
obj-$(CONFIG_DMASOUND) += oss/
|
|
|
|
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
|
|
|
|
- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
|
|
|
|
+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
|
|
|
|
obj-$(CONFIG_SND_AOA) += aoa/
|
|
|
|
|
|
|
|
# This one must be compilable even if sound is configured out
|
|
|
|
--- /dev/null
|
|
|
|
+++ b/sound/avr32/Kconfig
|
|
|
|
@@ -0,0 +1,11 @@
|
|
|
|
+menu "AVR32 devices"
|
|
|
|
+ depends on SND != n && AVR32
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+config SND_ATMEL_AC97
|
|
|
|
+ tristate "Atmel AC97 Controller Driver"
|
|
|
|
+ select SND_PCM
|
|
|
|
+ select SND_AC97_CODEC
|
|
|
|
+ help
|
|
|
|
+ ALSA sound driver for the Atmel AC97 controller.
|
|
|
|
+
|
|
|
|
+endmenu
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
2008-07-05 17:49:07 +03:00
|
|
|
+++ b/sound/avr32/Makefile
|
|
|
|
@@ -0,0 +1,3 @@
|
|
|
|
+snd-atmel-ac97-objs := ac97c.o
|
|
|
|
+
|
|
|
|
+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/sound/avr32/ac97c.c
|
2008-07-05 17:49:07 +03:00
|
|
|
@@ -0,0 +1,951 @@
|
2007-10-16 15:22:57 +03:00
|
|
|
+/*
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Driver for the Atmel AC97 controller
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Copyright (C) 2005-2007 Atmel Corporation
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
|
+ * under the terms of the GNU General Public License version 2 as published by
|
|
|
|
+ * the Free Software Foundation.
|
2007-10-16 15:22:57 +03:00
|
|
|
+ */
|
|
|
|
+#include <linux/clk.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/delay.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+#include <linux/dma-mapping.h>
|
2008-07-05 17:49:07 +03:00
|
|
|
+#include <linux/gpio.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/platform_device.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/mutex.h>
|
|
|
|
+#include <linux/io.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <sound/core.h>
|
|
|
|
+#include <sound/initval.h>
|
|
|
|
+#include <sound/pcm.h>
|
|
|
|
+#include <sound/pcm_params.h>
|
|
|
|
+#include <sound/ac97_codec.h>
|
|
|
|
+#include <sound/memalloc.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+#include <asm/arch/board.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <asm/dma-controller.h>
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include "ac97c.h"
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/* Serialize access to opened */
|
|
|
|
+static DEFINE_MUTEX(opened_mutex);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct atmel_ac97_dma_info {
|
|
|
|
+ struct dma_request_cyclic req_tx;
|
|
|
|
+ struct dma_request_cyclic req_rx;
|
|
|
|
+ unsigned short rx_periph_id;
|
|
|
|
+ unsigned short tx_periph_id;
|
2008-07-05 17:49:07 +03:00
|
|
|
+ unsigned short controller;
|
2007-07-12 17:11:31 +03:00
|
|
|
+};
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct atmel_ac97 {
|
|
|
|
+ /* Serialize access to opened */
|
2007-10-16 15:22:57 +03:00
|
|
|
+ spinlock_t lock;
|
|
|
|
+ void __iomem *regs;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct snd_pcm_substream *playback_substream;
|
|
|
|
+ struct snd_pcm_substream *capture_substream;
|
|
|
|
+ struct snd_card *card;
|
|
|
|
+ struct snd_pcm *pcm;
|
|
|
|
+ struct snd_ac97 *ac97;
|
|
|
|
+ struct snd_ac97_bus *ac97_bus;
|
|
|
|
+ int opened;
|
|
|
|
+ int period;
|
2008-07-05 17:49:07 +03:00
|
|
|
+ int reset_pin;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ u64 cur_format;
|
|
|
|
+ unsigned int cur_rate;
|
|
|
|
+ struct clk *mck;
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+ struct atmel_ac97_dma_info dma;
|
|
|
|
+};
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
|
|
|
|
+
|
|
|
|
+#define ac97c_writel(chip, reg, val) \
|
|
|
|
+ __raw_writel((val), (chip)->regs + AC97C_##reg)
|
|
|
|
+#define ac97c_readl(chip, reg) \
|
|
|
|
+ __raw_readl((chip)->regs + AC97C_##reg)
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * PCM part
|
|
|
|
+ */
|
|
|
|
+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
|
|
|
|
+ .info = (SNDRV_PCM_INFO_INTERLEAVED
|
|
|
|
+ | SNDRV_PCM_INFO_MMAP
|
|
|
|
+ | SNDRV_PCM_INFO_MMAP_VALID
|
|
|
|
+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
|
|
|
|
+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
|
|
|
|
+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
|
|
|
|
+ | SNDRV_PCM_FMTBIT_S16_LE),
|
|
|
|
+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
|
|
|
|
+ .rate_min = 4000,
|
|
|
|
+ .rate_max = 48000,
|
|
|
|
+ .channels_min = 1,
|
|
|
|
+ .channels_max = 6,
|
|
|
|
+ .buffer_bytes_max = 64*1024,
|
|
|
|
+ .period_bytes_min = 512,
|
|
|
|
+ .period_bytes_max = 4095,
|
|
|
|
+ .periods_min = 8,
|
|
|
|
+ .periods_max = 1024,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
|
|
|
|
+ .info = (SNDRV_PCM_INFO_INTERLEAVED
|
|
|
|
+ | SNDRV_PCM_INFO_MMAP
|
|
|
|
+ | SNDRV_PCM_INFO_MMAP_VALID
|
|
|
|
+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
|
|
|
|
+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
|
|
|
|
+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
|
|
|
|
+ | SNDRV_PCM_FMTBIT_S16_LE),
|
|
|
|
+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
|
|
|
|
+ .rate_min = 4000,
|
|
|
|
+ .rate_max = 48000,
|
|
|
|
+ .channels_min = 1,
|
|
|
|
+ .channels_max = 2,
|
|
|
|
+ .buffer_bytes_max = 64*1024,
|
|
|
|
+ .period_bytes_min = 512,
|
|
|
|
+ .period_bytes_max = 4095,
|
|
|
|
+ .periods_min = 8,
|
|
|
|
+ .periods_max = 1024,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * PCM functions
|
|
|
|
+ */
|
|
|
|
+static int
|
|
|
|
+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->opened++;
|
|
|
|
+ runtime->hw = snd_atmel_ac97_playback_hw;
|
|
|
|
+ if (chip->cur_rate) {
|
|
|
|
+ runtime->hw.rate_min = chip->cur_rate;
|
|
|
|
+ runtime->hw.rate_max = chip->cur_rate;
|
|
|
|
+ }
|
|
|
|
+ if (chip->cur_format)
|
|
|
|
+ runtime->hw.formats = (1ULL << chip->cur_format);
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
|
|
|
+ chip->playback_substream = substream;
|
|
|
|
+ chip->period = 0;
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int
|
|
|
|
+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->opened++;
|
|
|
|
+ runtime->hw = snd_atmel_ac97_capture_hw;
|
|
|
|
+ if (chip->cur_rate) {
|
|
|
|
+ runtime->hw.rate_min = chip->cur_rate;
|
|
|
|
+ runtime->hw.rate_max = chip->cur_rate;
|
|
|
|
+ }
|
|
|
|
+ if (chip->cur_format)
|
|
|
|
+ runtime->hw.formats = (1ULL << chip->cur_format);
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
|
|
|
+ chip->capture_substream = substream;
|
|
|
|
+ chip->period = 0;
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->opened--;
|
|
|
|
+ if (!chip->opened) {
|
|
|
|
+ chip->cur_rate = 0;
|
|
|
|
+ chip->cur_format = 0;
|
|
|
|
+ }
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->opened--;
|
|
|
|
+ if (!chip->opened) {
|
|
|
|
+ chip->cur_rate = 0;
|
|
|
|
+ chip->cur_format = 0;
|
|
|
|
+ }
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int
|
|
|
|
+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
|
|
|
|
+ struct snd_pcm_hw_params *hw_params)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ int err;
|
|
|
|
+
|
|
|
|
+ err = snd_pcm_lib_malloc_pages(substream,
|
|
|
|
+ params_buffer_bytes(hw_params));
|
|
|
|
+ if (err < 0)
|
|
|
|
+ return err;
|
|
|
|
+
|
|
|
|
+ /* Set restrictions to params */
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->cur_rate = params_rate(hw_params);
|
|
|
|
+ chip->cur_format = params_format(hw_params);
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int
|
|
|
|
+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
|
|
|
|
+ struct snd_pcm_hw_params *hw_params)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ int err;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_pcm_lib_malloc_pages(substream,
|
|
|
|
+ params_buffer_bytes(hw_params));
|
|
|
|
+ if (err < 0)
|
|
|
|
+ return err;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Set restrictions to params */
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ chip->cur_rate = params_rate(hw_params);
|
|
|
|
+ chip->cur_format = params_format(hw_params);
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return snd_pcm_lib_free_pages(substream);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return snd_pcm_lib_free_pages(substream);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct platform_device *pdev = chip->pdev;
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+ int block_size = frames_to_bytes(runtime, runtime->period_size);
|
|
|
|
+ unsigned long word = 0;
|
|
|
|
+ unsigned long buffer_size = 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
|
|
|
|
+ block_size * 2, DMA_TO_DEVICE);
|
|
|
|
+
|
|
|
|
+ /* Assign slots to channels */
|
|
|
|
+ switch (substream->runtime->channels) {
|
|
|
|
+ case 1:
|
|
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
|
|
|
|
+ break;
|
|
|
|
+ case 2:
|
|
|
|
+ /* Assign Left and Right slot to Channel A */
|
|
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
|
|
|
|
+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ /* TODO: support more than two channels */
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, OCA, word);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Configure sample format and size */
|
|
|
|
+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (runtime->format) {
|
|
|
|
+ case SNDRV_PCM_FORMAT_S16_LE:
|
|
|
|
+ word |= AC97C_CMR_CEM_LITTLE;
|
|
|
|
+ break;
|
|
|
|
+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
|
|
|
|
+ default:
|
|
|
|
+ word &= ~AC97C_CMR_CEM_LITTLE;
|
|
|
|
+ break;
|
|
|
|
+ }
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, CAMR, word);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Set variable rate if needed */
|
|
|
|
+ if (runtime->rate != 48000) {
|
|
|
|
+ word = ac97c_readl(chip, MR);
|
|
|
|
+ word |= AC97C_MR_VRA;
|
|
|
|
+ ac97c_writel(chip, MR, word);
|
|
|
|
+ } else {
|
|
|
|
+ /* Clear Variable Rate Bit */
|
|
|
|
+ word = ac97c_readl(chip, MR);
|
|
|
|
+ word &= ~AC97C_MR_VRA;
|
|
|
|
+ ac97c_writel(chip, MR, word);
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Set rate */
|
|
|
|
+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
|
|
|
|
+ runtime->periods;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip->dma.req_tx.buffer_size = buffer_size;
|
|
|
|
+ chip->dma.req_tx.periods = runtime->periods;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ BUG_ON(chip->dma.req_tx.buffer_size !=
|
|
|
|
+ (chip->dma.req_tx.periods *
|
|
|
|
+ frames_to_bytes(runtime, runtime->period_size)));
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
|
|
|
|
+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
|
|
|
|
+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
|
|
|
|
+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
|
|
+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
|
|
|
|
+ chip->dma.req_tx.dev_id = chip;
|
|
|
|
+
|
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct platform_device *pdev = chip->pdev;
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+ int block_size = frames_to_bytes(runtime, runtime->period_size);
|
|
|
|
+ unsigned long word = 0;
|
|
|
|
+ unsigned long buffer_size = 0;
|
|
|
|
+
|
|
|
|
+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
|
|
|
|
+ block_size * 2, DMA_FROM_DEVICE);
|
|
|
|
+
|
|
|
|
+ /* Assign slots to channels */
|
|
|
|
+ switch (substream->runtime->channels) {
|
|
|
|
+ case 1:
|
|
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
|
|
|
|
+ break;
|
|
|
|
+ case 2:
|
|
|
|
+ /* Assign Left and Right slot to Channel A */
|
|
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
|
|
|
|
+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ /* TODO: support more than two channels */
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ break;
|
2007-07-12 17:11:31 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, ICA, word);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Configure sample format and size */
|
|
|
|
+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (runtime->format) {
|
|
|
|
+ case SNDRV_PCM_FORMAT_S16_LE:
|
|
|
|
+ word |= AC97C_CMR_CEM_LITTLE;
|
|
|
|
+ break;
|
|
|
|
+ case SNDRV_PCM_FORMAT_S16_BE:
|
|
|
|
+ default:
|
|
|
|
+ word &= ~(AC97C_CMR_CEM_LITTLE);
|
|
|
|
+ break;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, CAMR, word);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Set variable rate if needed */
|
|
|
|
+ if (runtime->rate != 48000) {
|
|
|
|
+ word = ac97c_readl(chip, MR);
|
|
|
|
+ word |= AC97C_MR_VRA;
|
|
|
|
+ ac97c_writel(chip, MR, word);
|
|
|
|
+ } else {
|
|
|
|
+ /* Clear Variable Rate Bit */
|
|
|
|
+ word = ac97c_readl(chip, MR);
|
|
|
|
+ word &= ~(AC97C_MR_VRA);
|
|
|
|
+ ac97c_writel(chip, MR, word);
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Set rate */
|
|
|
|
+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
|
|
|
|
+ runtime->periods;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip->dma.req_rx.buffer_size = buffer_size;
|
|
|
|
+ chip->dma.req_rx.periods = runtime->periods;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ BUG_ON(chip->dma.req_rx.buffer_size !=
|
|
|
|
+ (chip->dma.req_rx.periods *
|
|
|
|
+ frames_to_bytes(runtime, runtime->period_size)));
|
|
|
|
+
|
|
|
|
+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
|
|
|
|
+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
|
|
|
|
+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
|
|
|
|
+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
|
|
|
|
+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
|
|
|
|
+ chip->dma.req_rx.dev_id = chip;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static int
|
|
|
|
+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ unsigned long camr;
|
|
|
|
+ int flags, err = 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock_irqsave(&chip->lock, flags);
|
|
|
|
+ camr = ac97c_readl(chip, CAMR);
|
|
|
|
+
|
|
|
|
+ switch (cmd) {
|
|
|
|
+ case SNDRV_PCM_TRIGGER_START:
|
|
|
|
+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
|
|
|
|
+ &chip->dma.req_tx);
|
|
|
|
+ dma_start_request(chip->dma.req_tx.req.dmac,
|
|
|
|
+ chip->dma.req_tx.req.channel);
|
|
|
|
+ camr |= AC97C_CMR_CENA;
|
|
|
|
+ break;
|
|
|
|
+ case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
|
|
|
|
+ chip->dma.req_tx.req.channel);
|
|
|
|
+ if (chip->opened <= 1)
|
|
|
|
+ camr &= ~AC97C_CMR_CENA;
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ err = -EINVAL;
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, CAMR, camr);
|
|
|
|
+
|
|
|
|
+ spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
+ return err;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static int
|
|
|
|
+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ unsigned long camr;
|
|
|
|
+ int flags, err = 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock_irqsave(&chip->lock, flags);
|
|
|
|
+ camr = ac97c_readl(chip, CAMR);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (cmd) {
|
|
|
|
+ case SNDRV_PCM_TRIGGER_START:
|
|
|
|
+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
|
|
|
|
+ &chip->dma.req_rx);
|
|
|
|
+ dma_start_request(chip->dma.req_rx.req.dmac,
|
|
|
|
+ chip->dma.req_rx.req.channel);
|
|
|
|
+ camr |= AC97C_CMR_CENA;
|
|
|
|
+ break;
|
|
|
|
+ case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
|
|
|
|
+ chip->dma.req_rx.req.channel);
|
|
|
|
+ mutex_lock(&opened_mutex);
|
|
|
|
+ if (chip->opened <= 1)
|
|
|
|
+ camr &= ~AC97C_CMR_CENA;
|
|
|
|
+ mutex_unlock(&opened_mutex);
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ err = -EINVAL;
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, CAMR, camr);
|
|
|
|
+
|
|
|
|
+ spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
+ return err;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static snd_pcm_uframes_t
|
|
|
|
+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+ snd_pcm_uframes_t pos;
|
|
|
|
+ unsigned long bytes;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ bytes = (dma_get_current_pos
|
|
|
|
+ (chip->dma.req_tx.req.dmac,
|
|
|
|
+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
|
|
|
|
+ pos = bytes_to_frames(runtime, bytes);
|
|
|
|
+ if (pos >= runtime->buffer_size)
|
|
|
|
+ pos -= runtime->buffer_size;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return pos;
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static snd_pcm_uframes_t
|
|
|
|
+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
+ snd_pcm_uframes_t pos;
|
|
|
|
+ unsigned long bytes;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ bytes = (dma_get_current_pos
|
|
|
|
+ (chip->dma.req_rx.req.dmac,
|
|
|
|
+ chip->dma.req_rx.req.channel)
|
|
|
|
+ - runtime->dma_addr);
|
|
|
|
+ pos = bytes_to_frames(runtime, bytes);
|
|
|
|
+ if (pos >= runtime->buffer_size)
|
|
|
|
+ pos -= runtime->buffer_size;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return pos;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct snd_pcm_ops atmel_ac97_playback_ops = {
|
|
|
|
+ .open = snd_atmel_ac97_playback_open,
|
|
|
|
+ .close = snd_atmel_ac97_playback_close,
|
|
|
|
+ .ioctl = snd_pcm_lib_ioctl,
|
|
|
|
+ .hw_params = snd_atmel_ac97_playback_hw_params,
|
|
|
|
+ .hw_free = snd_atmel_ac97_playback_hw_free,
|
|
|
|
+ .prepare = snd_atmel_ac97_playback_prepare,
|
|
|
|
+ .trigger = snd_atmel_ac97_playback_trigger,
|
|
|
|
+ .pointer = snd_atmel_ac97_playback_pointer,
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct snd_pcm_ops atmel_ac97_capture_ops = {
|
|
|
|
+ .open = snd_atmel_ac97_capture_open,
|
|
|
|
+ .close = snd_atmel_ac97_capture_close,
|
|
|
|
+ .ioctl = snd_pcm_lib_ioctl,
|
|
|
|
+ .hw_params = snd_atmel_ac97_capture_hw_params,
|
|
|
|
+ .hw_free = snd_atmel_ac97_capture_hw_free,
|
|
|
|
+ .prepare = snd_atmel_ac97_capture_prepare,
|
|
|
|
+ .trigger = snd_atmel_ac97_capture_trigger,
|
|
|
|
+ .pointer = snd_atmel_ac97_capture_pointer,
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
|
|
|
|
+ /* Playback */
|
|
|
|
+ {
|
|
|
|
+ .exclusive = 1,
|
|
|
|
+ .r = { {
|
|
|
|
+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
|
|
|
|
+ | (1 << AC97_SLOT_PCM_RIGHT)
|
|
|
|
+ | (1 << AC97_SLOT_PCM_CENTER)
|
|
|
|
+ | (1 << AC97_SLOT_PCM_SLEFT)
|
|
|
|
+ | (1 << AC97_SLOT_PCM_SRIGHT)
|
|
|
|
+ | (1 << AC97_SLOT_LFE)),
|
|
|
|
+ } }
|
|
|
|
+ },
|
|
|
|
+ /* PCM in */
|
|
|
|
+ {
|
|
|
|
+ .stream = 1,
|
|
|
|
+ .exclusive = 1,
|
|
|
|
+ .r = { {
|
|
|
|
+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
|
|
|
|
+ | (1 << AC97_SLOT_PCM_RIGHT)),
|
|
|
|
+ } }
|
|
|
|
+ },
|
|
|
|
+ /* Mic in */
|
|
|
|
+ {
|
|
|
|
+ .stream = 1,
|
|
|
|
+ .exclusive = 1,
|
|
|
|
+ .r = { {
|
|
|
|
+ .slots = (1<<AC97_SLOT_MIC),
|
|
|
|
+ } }
|
|
|
|
+ },
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
|
|
|
|
+{
|
|
|
|
+ struct snd_pcm *pcm;
|
|
|
|
+ int err;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_ac97_pcm_assign(chip->ac97_bus,
|
|
|
|
+ ARRAY_SIZE(atmel_ac97_pcm_defs),
|
|
|
|
+ atmel_ac97_pcm_defs);
|
|
|
|
+ if (err)
|
|
|
|
+ return err;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
|
|
|
|
+ if (err)
|
|
|
|
+ return err;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
|
|
|
|
+ &atmel_ac97_playback_ops);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
|
|
|
|
+ &atmel_ac97_capture_ops);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
|
|
+ &chip->pdev->dev,
|
|
|
|
+ 128 * 1024, 128 * 1024);
|
|
|
|
+
|
|
|
|
+ pcm->private_data = chip;
|
|
|
|
+ pcm->info_flags = 0;
|
|
|
|
+ strcpy(pcm->name, "Atmel-AC97");
|
|
|
|
+ chip->pcm = pcm;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/*
|
|
|
|
+ * Mixer part.
|
|
|
|
+ */
|
|
|
|
+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ int err;
|
|
|
|
+ struct snd_ac97_template template;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ memset(&template, 0, sizeof(template));
|
|
|
|
+ template.private_data = chip;
|
|
|
|
+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return err;
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void atmel_ac97_error(struct dma_request *_req)
|
|
|
|
+{
|
|
|
|
+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
|
|
|
|
+ struct atmel_ac97 *chip = req->dev_id;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
|
|
|
|
+ req->req.channel);
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void atmel_ac97_block_complete(struct dma_request *_req)
|
|
|
|
+{
|
|
|
|
+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
|
|
|
|
+ struct atmel_ac97 *chip = req->dev_id;
|
|
|
|
+ if (req->periph_id == chip->dma.tx_periph_id)
|
|
|
|
+ snd_pcm_period_elapsed(chip->playback_substream);
|
|
|
|
+ else
|
|
|
|
+ snd_pcm_period_elapsed(chip->capture_substream);
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/*
|
|
|
|
+ * Codec part.
|
|
|
|
+ */
|
|
|
|
+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
|
|
+ unsigned short val)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = get_chip(ac97);
|
|
|
|
+ unsigned long word;
|
|
|
|
+ int timeout = 40;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ word = (reg & 0x7f) << 16 | val;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ do {
|
|
|
|
+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
|
|
|
|
+ ac97c_writel(chip, COTHR, word);
|
|
|
|
+ return;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ udelay(1);
|
|
|
|
+ } while (--timeout);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
|
|
|
|
+ unsigned short reg)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = get_chip(ac97);
|
|
|
|
+ unsigned long word;
|
|
|
|
+ int timeout = 40;
|
|
|
|
+ int write = 10;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ word = (0x80 | (reg & 0x7f)) << 16;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
|
|
|
|
+ ac97c_readl(chip, CORHR);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+retry_write:
|
|
|
|
+ timeout = 40;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ do {
|
|
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
|
|
|
|
+ ac97c_writel(chip, COTHR, word);
|
|
|
|
+ goto read_reg;
|
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ udelay(10);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ } while (--timeout);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!--write)
|
|
|
|
+ goto timed_out;
|
|
|
|
+ goto retry_write;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+read_reg:
|
|
|
|
+ do {
|
|
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
|
|
|
|
+ unsigned short val = ac97c_readl(chip, CORHR);
|
|
|
|
+ return val;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-06-13 00:13:40 +03:00
|
|
|
+ udelay(10);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ } while (--timeout);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!--write)
|
|
|
|
+ goto timed_out;
|
|
|
|
+ goto retry_write;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+timed_out:
|
|
|
|
+ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
|
|
|
|
+ return 0xffff;
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
|
|
|
|
+{
|
2008-07-05 17:49:07 +03:00
|
|
|
+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
|
|
|
|
+ if (chip->reset_pin >= 0) {
|
|
|
|
+ gpio_set_value(chip->reset_pin, 0);
|
|
|
|
+ /* AC97 v2.2 specifications says minimum 1 us. */
|
|
|
|
+ udelay(5);
|
|
|
|
+ gpio_set_value(chip->reset_pin, 1);
|
|
|
|
+ }
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ac97c_writel(chip, MR, AC97C_MR_WRST);
|
|
|
|
+ mdelay(1);
|
|
|
|
+ ac97c_writel(chip, MR, AC97C_MR_ENA);
|
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void snd_atmel_ac97_destroy(struct snd_card *card)
|
|
|
|
+{
|
|
|
|
+ struct atmel_ac97 *chip = get_chip(card);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (chip->regs)
|
|
|
|
+ iounmap(chip->regs);
|
|
|
|
+
|
|
|
|
+ if (chip->mck) {
|
|
|
|
+ clk_disable(chip->mck);
|
|
|
|
+ clk_put(chip->mck);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ if (chip->dma.req_tx.req.dmac) {
|
|
|
|
+ dma_release_channel(chip->dma.req_tx.req.dmac,
|
|
|
|
+ chip->dma.req_tx.req.channel);
|
|
|
|
+ }
|
|
|
|
+ if (chip->dma.req_rx.req.dmac) {
|
|
|
|
+ dma_release_channel(chip->dma.req_rx.req.dmac,
|
|
|
|
+ chip->dma.req_rx.req.channel);
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
|
|
|
|
+ struct platform_device *pdev)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static struct snd_ac97_bus_ops ops = {
|
|
|
|
+ .write = snd_atmel_ac97_write,
|
|
|
|
+ .read = snd_atmel_ac97_read,
|
|
|
|
+ };
|
|
|
|
+ struct atmel_ac97 *chip = get_chip(card);
|
2008-07-05 17:49:07 +03:00
|
|
|
+ struct ac97c_platform_data *pdata;
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct resource *regs;
|
|
|
|
+ struct clk *mck;
|
|
|
|
+ int err;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs)
|
2007-10-16 15:22:57 +03:00
|
|
|
+ return -ENXIO;
|
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ pdata = pdev->dev.platform_data;
|
|
|
|
+ if (!pdata)
|
|
|
|
+ return -ENXIO;
|
|
|
|
+
|
|
|
|
+ chip->reset_pin = pdata->reset_pin;
|
|
|
|
+
|
|
|
|
+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
|
|
|
|
+ if (chip->reset_pin >= 0) {
|
|
|
|
+ if (gpio_request(chip->reset_pin, chip->card->shortname)) {
|
|
|
|
+ dev_dbg(&pdev->dev, "ac97: reset pin not available\n");
|
|
|
|
+ chip->reset_pin = -1;
|
|
|
|
+ } else {
|
|
|
|
+ gpio_direction_output(chip->reset_pin, 1);
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
|
|
|
|
+ chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
|
|
|
|
+ chip->dma.controller = pdata->dma_controller_id;
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ mck = clk_get(&pdev->dev, "pclk");
|
|
|
|
+ if (IS_ERR(mck))
|
|
|
|
+ return PTR_ERR(mck);
|
|
|
|
+ clk_enable(mck);
|
|
|
|
+ chip->mck = mck;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ card->private_free = snd_atmel_ac97_destroy;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock_init(&chip->lock);
|
|
|
|
+ chip->card = card;
|
|
|
|
+ chip->pdev = pdev;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!chip->regs)
|
|
|
|
+ return -ENOMEM;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_card_set_dev(card, &pdev->dev);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
|
|
|
|
+
|
|
|
|
+ return err;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ static int dev;
|
|
|
|
+ struct snd_card *card;
|
|
|
|
+ struct atmel_ac97 *chip;
|
|
|
|
+ int err;
|
|
|
|
+ int ch;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ mutex_init(&opened_mutex);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = -ENOMEM;
|
|
|
|
+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
|
|
|
|
+ THIS_MODULE, sizeof(struct atmel_ac97));
|
|
|
|
+ if (!card)
|
|
|
|
+ goto out;
|
2008-07-05 17:49:07 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip = get_chip(card);
|
2008-07-05 17:49:07 +03:00
|
|
|
+ chip->reset_pin = -1;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_atmel_ac97_create(card, pdev);
|
|
|
|
+ if (err)
|
|
|
|
+ goto out_free_card;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_atmel_ac97_reset(chip);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_atmel_ac97_mixer_new(chip);
|
|
|
|
+ if (err)
|
|
|
|
+ goto out_free_card;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_atmel_ac97_pcm_new(chip);
|
|
|
|
+ if (err)
|
|
|
|
+ goto out_free_card;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!chip->dma.req_tx.req.dmac) {
|
|
|
|
+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
|
|
|
|
+ err = -ENODEV;
|
|
|
|
+ goto out_free_card;
|
|
|
|
+ }
|
2008-07-05 17:49:07 +03:00
|
|
|
+ chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!chip->dma.req_rx.req.dmac) {
|
|
|
|
+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
|
|
|
|
+ err = -ENODEV;
|
|
|
|
+ goto out_free_card;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
|
|
|
|
+ if (ch < 0) {
|
|
|
|
+ dev_dbg(&chip->pdev->dev,
|
|
|
|
+ "could not allocate TX DMA channel\n");
|
|
|
|
+ err = ch;
|
|
|
|
+ goto out_free_card;
|
2007-06-08 13:44:01 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+ chip->dma.req_tx.req.channel = ch;
|
|
|
|
+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
|
|
|
|
+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
|
|
|
|
+ chip->dma.req_tx.req.error = atmel_ac97_error;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
|
|
|
|
+ if (ch < 0) {
|
|
|
|
+ dev_dbg(&chip->pdev->dev,
|
|
|
|
+ "could not allocate RX DMA channel\n");
|
|
|
|
+ err = ch;
|
|
|
|
+ goto out_free_card;
|
|
|
|
+ }
|
|
|
|
+ chip->dma.req_rx.req.channel = ch;
|
|
|
|
+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
|
|
|
|
+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
|
|
|
|
+ chip->dma.req_rx.req.error = atmel_ac97_error;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ strcpy(card->driver, "atmel_ac97c");
|
|
|
|
+ strcpy(card->shortname, "atmel_ac97c");
|
|
|
|
+ sprintf(card->longname, "Atmel AVR32 AC97 controller");
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ err = snd_card_register(card);
|
|
|
|
+ if (err)
|
|
|
|
+ goto out_free_card;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ platform_set_drvdata(pdev, card);
|
|
|
|
+ dev++;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
|
|
|
|
+ chip->regs);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+out_free_card:
|
2008-07-05 17:49:07 +03:00
|
|
|
+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
|
|
|
|
+ if (chip->reset_pin >= 0)
|
|
|
|
+ gpio_free(chip->reset_pin);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_card_free(card);
|
|
|
|
+out:
|
|
|
|
+ return err;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+ static int
|
|
|
|
+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
|
|
|
|
+{
|
|
|
|
+ struct snd_card *card = platform_get_drvdata(pdev);
|
|
|
|
+ struct atmel_ac97 *chip = card->private_data;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ clk_disable(chip->mck);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int snd_atmel_ac97_resume(struct platform_device *pdev)
|
|
|
|
+{
|
2008-07-05 17:49:07 +03:00
|
|
|
+ struct snd_card *card = platform_get_drvdata(pdev);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct atmel_ac97 *chip = card->private_data;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ clk_enable(chip->mck);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+#else
|
|
|
|
+#define snd_atmel_ac97_suspend NULL
|
|
|
|
+#define snd_atmel_ac97_resume NULL
|
|
|
|
+#endif
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct snd_card *card = platform_get_drvdata(pdev);
|
2008-07-05 17:49:07 +03:00
|
|
|
+ struct atmel_ac97 *chip = get_chip(card);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
|
|
|
|
+ if (chip->reset_pin >= 0)
|
|
|
|
+ gpio_free(chip->reset_pin);
|
2008-02-07 22:08:19 +02:00
|
|
|
+ snd_card_free(card);
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
2007-10-16 15:22:57 +03:00
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct platform_driver atmel_ac97_driver = {
|
|
|
|
+ .remove = __devexit_p(snd_atmel_ac97_remove),
|
2007-10-16 15:22:57 +03:00
|
|
|
+ .driver = {
|
2008-02-07 22:08:19 +02:00
|
|
|
+ .name = "atmel_ac97c",
|
2007-06-08 13:44:01 +03:00
|
|
|
+ },
|
2008-02-07 22:08:19 +02:00
|
|
|
+ .suspend = snd_atmel_ac97_suspend,
|
|
|
|
+ .resume = snd_atmel_ac97_resume,
|
2007-06-08 13:44:01 +03:00
|
|
|
+};
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __init atmel_ac97_init(void)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return platform_driver_probe(&atmel_ac97_driver,
|
|
|
|
+ snd_atmel_ac97_probe);
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+module_init(atmel_ac97_init);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void __exit atmel_ac97_exit(void)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ platform_driver_unregister(&atmel_ac97_driver);
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+module_exit(atmel_ac97_exit);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
|
|
|
+MODULE_LICENSE("GPL");
|
2008-02-07 22:08:19 +02:00
|
|
|
+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
|
|
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/sound/avr32/ac97c.h
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,71 @@
|
2007-06-08 13:44:01 +03:00
|
|
|
+/*
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Register definitions for the Atmel AC97 Controller.
|
2007-06-08 13:44:01 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
2007-06-08 13:44:01 +03:00
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ */
|
2008-02-07 22:08:19 +02:00
|
|
|
+#ifndef __SOUND_AVR32_AC97C_H
|
|
|
|
+#define __SOUND_AVR32_AC97C_H
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_MR 0x08
|
|
|
|
+#define AC97C_ICA 0x10
|
|
|
|
+#define AC97C_OCA 0x14
|
|
|
|
+#define AC97C_CARHR 0x20
|
|
|
|
+#define AC97C_CATHR 0x24
|
|
|
|
+#define AC97C_CASR 0x28
|
|
|
|
+#define AC97C_CAMR 0x2c
|
|
|
|
+#define AC97C_CBRHR 0x30
|
|
|
|
+#define AC97C_CBTHR 0x34
|
|
|
|
+#define AC97C_CBSR 0x38
|
|
|
|
+#define AC97C_CBMR 0x3c
|
|
|
|
+#define AC97C_CORHR 0x40
|
|
|
|
+#define AC97C_COTHR 0x44
|
|
|
|
+#define AC97C_COSR 0x48
|
|
|
|
+#define AC97C_COMR 0x4c
|
|
|
|
+#define AC97C_SR 0x50
|
|
|
|
+#define AC97C_IER 0x54
|
|
|
|
+#define AC97C_IDR 0x58
|
|
|
|
+#define AC97C_IMR 0x5c
|
|
|
|
+#define AC97C_VERSION 0xfc
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_CATPR PDC_TPR
|
|
|
|
+#define AC97C_CATCR PDC_TCR
|
|
|
|
+#define AC97C_CATNPR PDC_TNPR
|
|
|
|
+#define AC97C_CATNCR PDC_TNCR
|
|
|
|
+#define AC97C_CARPR PDC_RPR
|
|
|
|
+#define AC97C_CARCR PDC_RCR
|
|
|
|
+#define AC97C_CARNPR PDC_RNPR
|
|
|
|
+#define AC97C_CARNCR PDC_RNCR
|
|
|
|
+#define AC97C_PTCR PDC_PTCR
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_MR_ENA (1 << 0)
|
|
|
|
+#define AC97C_MR_WRST (1 << 1)
|
|
|
|
+#define AC97C_MR_VRA (1 << 2)
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_CSR_TXRDY (1 << 0)
|
|
|
|
+#define AC97C_CSR_UNRUN (1 << 2)
|
|
|
|
+#define AC97C_CSR_RXRDY (1 << 4)
|
|
|
|
+#define AC97C_CSR_ENDTX (1 << 10)
|
|
|
|
+#define AC97C_CSR_ENDRX (1 << 14)
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_CMR_SIZE_20 (0 << 16)
|
|
|
|
+#define AC97C_CMR_SIZE_18 (1 << 16)
|
|
|
|
+#define AC97C_CMR_SIZE_16 (2 << 16)
|
|
|
|
+#define AC97C_CMR_SIZE_10 (3 << 16)
|
|
|
|
+#define AC97C_CMR_CEM_LITTLE (1 << 18)
|
|
|
|
+#define AC97C_CMR_CEM_BIG (0 << 18)
|
|
|
|
+#define AC97C_CMR_CENA (1 << 21)
|
|
|
|
+#define AC97C_CMR_PDCEN (1 << 22)
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_SR_CAEVT (1 << 3)
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define AC97C_CH_ASSIGN(slot, channel) \
|
|
|
|
+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
|
|
|
|
+#define AC97C_CHANNEL_NONE 0x0
|
|
|
|
+#define AC97C_CHANNEL_A 0x1
|
|
|
|
+#define AC97C_CHANNEL_B 0x2
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#endif /* __SOUND_AVR32_AC97C_H */
|
2008-07-05 17:49:07 +03:00
|
|
|
--- a/sound/oss/Kconfig
|
|
|
|
+++ b/sound/oss/Kconfig
|
|
|
|
@@ -654,3 +654,7 @@
|
|
|
|
int "DAC channel"
|
|
|
|
default "1"
|
|
|
|
depends on SOUND_SH_DAC_AUDIO
|
2008-04-23 23:25:37 +03:00
|
|
|
+
|
2008-07-05 17:49:07 +03:00
|
|
|
+config SOUND_AT32_ABDAC
|
|
|
|
+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
|
|
|
|
+ depends on SOUND_PRIME && AVR32
|
|
|
|
--- a/sound/oss/Makefile
|
|
|
|
+++ b/sound/oss/Makefile
|
|
|
|
@@ -9,6 +9,7 @@
|
2008-02-07 22:08:19 +02:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
# Please leave it as is, cause the link order is significant !
|
2008-04-23 23:25:37 +03:00
|
|
|
|
2008-07-05 17:49:07 +03:00
|
|
|
+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
|
|
|
|
obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
|
|
|
|
obj-$(CONFIG_SOUND_HAL2) += hal2.o
|
|
|
|
obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/sound/oss/at32_abdac.c
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,722 @@
|
2007-10-16 15:22:57 +03:00
|
|
|
+/*
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
2007-10-16 15:22:57 +03:00
|
|
|
+ */
|
|
|
|
+#include <linux/clk.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/fs.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/interrupt.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/kernel.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/platform_device.h>
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <linux/sound.h>
|
|
|
|
+#include <linux/soundcard.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include <asm/byteorder.h>
|
|
|
|
+#include <asm/dma-controller.h>
|
|
|
|
+#include <asm/io.h>
|
|
|
|
+#include <asm/uaccess.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
|
|
|
|
+#include <linux/byteorder/swabb.h>
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#include "at32_abdac.h"
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#define DMA_BUFFER_SIZE 32768
|
|
|
|
+#define DMA_PERIOD_SHIFT 10
|
|
|
|
+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
|
|
|
|
+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct sound_settings {
|
|
|
|
+ unsigned int format;
|
|
|
|
+ unsigned int channels;
|
|
|
|
+ unsigned int sample_rate;
|
|
|
|
+ /* log2(bytes per sample) */
|
|
|
|
+ unsigned int input_order;
|
|
|
|
+};
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+struct at32_dac {
|
|
|
|
+ spinlock_t lock;
|
|
|
|
+ void __iomem *regs;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* head and tail refer to number of words */
|
|
|
|
+ struct {
|
|
|
|
+ u32 *buf;
|
|
|
|
+ int head;
|
|
|
|
+ int tail;
|
|
|
|
+ } dma;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct semaphore sem;
|
|
|
|
+ wait_queue_head_t write_wait;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /*
|
|
|
|
+ * Read at most ucount bytes from ubuf, translate to 2-channel
|
|
|
|
+ * signed 16-bit big endian format and write to the DMA buffer
|
|
|
|
+ * as long as there is room left. Return the number of bytes
|
|
|
|
+ * successfully copied from ubuf, or -EFAULT if the first
|
|
|
|
+ * sample from ubuf couldn't be read. This function is not
|
|
|
|
+ * called unless there is room for at least one sample (4
|
|
|
|
+ * bytes) in the DMA buffer.
|
|
|
|
+ */
|
|
|
|
+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
|
|
|
|
+ size_t ucount);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct sound_settings dsp_settings;
|
|
|
|
+ struct dma_request_cyclic req;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct clk *mck;
|
|
|
|
+ struct clk *sample_clk;
|
|
|
|
+ struct platform_device *pdev;
|
|
|
|
+ int busy;
|
|
|
|
+ int playing;
|
|
|
|
+ int dev_dsp;
|
|
|
|
+};
|
|
|
|
+static struct at32_dac *the_dac;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline unsigned int abdac_get_head(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned int space;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ space = ((dac->dma.tail - dac->dma.head - 1)
|
|
|
|
+ & ((DMA_BUFFER_SIZE / 4) - 1));
|
|
|
|
+ return space;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void abdac_update_dma_tail(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dma_addr_t dma_addr;
|
|
|
|
+ unsigned int new_tail;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->playing) {
|
|
|
|
+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
|
|
|
|
+ dac->req.req.channel);
|
|
|
|
+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
|
|
|
|
+ if (new_tail >= dac->dma.head
|
|
|
|
+ && (dac->dma.tail < dac->dma.head
|
|
|
|
+ || dac->dma.tail > new_tail))
|
|
|
|
+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
|
|
|
|
+ dac->dma.tail = new_tail;
|
|
|
|
+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
|
|
|
|
+ dma_addr, dac->req.buffer_start, dac->dma.tail);
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_start(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ int ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->playing)
|
|
|
|
+ return 0;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ clk_enable(dac->sample_clk);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out_stop_clock;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
|
|
|
|
+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out_stop_request;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac_writel(dac, CTRL, DAC_BIT(EN));
|
|
|
|
+ dac->playing = 1;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+out_stop_request:
|
|
|
|
+ dma_stop_request(dac->req.req.dmac,
|
|
|
|
+ dac->req.req.channel);
|
|
|
|
+out_stop_clock:
|
|
|
|
+ clk_disable(dac->sample_clk);
|
|
|
|
+ return ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_stop(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->playing) {
|
|
|
|
+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
|
|
|
|
+ dac_writel(dac, DATA, 0);
|
|
|
|
+ dac_writel(dac, CTRL, 0);
|
|
|
|
+ dac->playing = 0;
|
|
|
|
+ clk_disable(dac->sample_clk);
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_dma_prepare(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
|
|
|
|
+ &dac->req.buffer_start, GFP_KERNEL);
|
|
|
|
+ if (!dac->dma.buf)
|
|
|
|
+ return -ENOMEM;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->dma.head = dac->dma.tail = 0;
|
|
|
|
+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
|
|
|
|
+ dac->req.buffer_size = DMA_BUFFER_SIZE;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void abdac_dma_cleanup(struct at32_dac *dac)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->dma.buf)
|
|
|
|
+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
|
|
|
|
+ dac->dma.buf, dac->req.buffer_start);
|
|
|
|
+ dac->dma.buf = NULL;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void abdac_dma_block_complete(struct dma_request *req)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
|
|
|
|
+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ wake_up(&dac->write_wait);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void abdac_dma_error(struct dma_request *req)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
|
|
|
|
+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dev_err(&dac->pdev->dev, "DMA error\n");
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct at32_dac *dac = dev_id;
|
|
|
|
+ u32 status;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ status = dac_readl(dac, INT_STATUS);
|
|
|
|
+ if (status & DAC_BIT(UNDERRUN)) {
|
|
|
|
+ dev_err(&dac->pdev->dev, "Underrun detected!\n");
|
|
|
|
+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
|
|
|
|
+ } else {
|
|
|
|
+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
|
|
|
|
+ status);
|
|
|
|
+ dac_writel(dac, INT_CLR, status);
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return IRQ_HANDLED;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
|
|
|
|
+ size_t ucount)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ssize_t ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->dsp_settings.channels == 2) {
|
|
|
|
+ const u32 __user *up = (const u32 __user *)ubuf;
|
|
|
|
+ u32 sample;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
|
|
|
|
+ if (!abdac_dma_space(dac))
|
|
|
|
+ break;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
|
|
+ if (ret == 0)
|
|
|
|
+ ret = -EFAULT;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ dac->dma.buf[abdac_get_head(dac)] = sample;
|
|
|
|
+ dac->dma.head++;
|
|
|
|
+ }
|
|
|
|
+ } else {
|
|
|
|
+ const u16 __user *up = (const u16 __user *)ubuf;
|
|
|
|
+ u16 sample;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
|
|
|
|
+ if (!abdac_dma_space(dac))
|
|
|
|
+ break;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
|
|
+ if (ret == 0)
|
|
|
|
+ ret = -EFAULT;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ dac->dma.buf[abdac_get_head(dac)]
|
|
|
|
+ = (sample << 16) | sample;
|
|
|
|
+ dac->dma.head++;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
|
|
|
|
+ size_t ucount)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ssize_t ret;
|
|
|
|
+
|
|
|
|
+ if (dac->dsp_settings.channels == 2) {
|
|
|
|
+ const u32 __user *up = (const u32 __user *)ubuf;
|
|
|
|
+ u32 sample;
|
|
|
|
+
|
|
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
|
|
|
|
+ if (!abdac_dma_space(dac))
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
|
|
+ if (ret == 0)
|
|
|
|
+ ret = -EFAULT;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ /* Swap bytes in each halfword */
|
|
|
|
+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
|
|
|
|
+ dac->dma.head++;
|
|
|
|
+ }
|
|
|
|
+ } else {
|
|
|
|
+ const u16 __user *up = (const u16 __user *)ubuf;
|
|
|
|
+ u16 sample;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
|
|
|
|
+ if (!abdac_dma_space(dac))
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
|
|
+ if (ret == 0)
|
|
|
|
+ ret = -EFAULT;
|
|
|
|
+ break;
|
|
|
|
+ }
|
|
|
|
+ sample = swab16(sample);
|
|
|
|
+ dac->dma.buf[abdac_get_head(dac)]
|
|
|
|
+ = (sample << 16) | sample;
|
|
|
|
+ dac->dma.head++;
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
|
|
|
|
+ const char __user *buffer,
|
|
|
|
+ size_t count)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* At least one buffer must be available at this point */
|
|
|
|
+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return dac->trans(dac, buffer, count);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_set_format(struct at32_dac *dac, int format)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned int order;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (format) {
|
|
|
|
+ case AFMT_S16_BE:
|
|
|
|
+ order = 1;
|
|
|
|
+ dac->trans = trans_s16be;
|
|
|
|
+ break;
|
|
|
|
+ case AFMT_S16_LE:
|
|
|
|
+ order = 1;
|
|
|
|
+ dac->trans = trans_s16le;
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (dac->dsp_settings.channels == 2)
|
|
|
|
+ order++;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->dsp_settings.input_order = order;
|
|
|
|
+ dac->dsp_settings.format = format;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ unsigned long new_rate;
|
|
|
|
+ int ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ return ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* TODO: mplayer seems to have a problem with this */
|
|
|
|
+#if 0
|
|
|
|
+ new_rate = clk_get_rate(dac->sample_clk);
|
|
|
|
+ dac->dsp_settings.sample_rate = new_rate / 256;
|
|
|
|
+#else
|
|
|
|
+ dac->dsp_settings.sample_rate = rate;
|
|
|
|
+#endif
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
|
|
|
+ return 0;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static ssize_t abdac_dsp_write(struct file *file,
|
|
|
|
+ const char __user *buffer,
|
|
|
|
+ size_t count, loff_t *ppos)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct at32_dac *dac = file->private_data;
|
|
|
|
+ DECLARE_WAITQUEUE(wait, current);
|
|
|
|
+ unsigned int avail;
|
|
|
|
+ ssize_t copied;
|
|
|
|
+ ssize_t ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Avoid address space checking in the translation functions */
|
|
|
|
+ if (!access_ok(buffer, count, VERIFY_READ))
|
|
|
|
+ return -EFAULT;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ down(&dac->sem);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (!dac->dma.buf) {
|
|
|
|
+ ret = abdac_dma_prepare(dac);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ add_wait_queue(&dac->write_wait, &wait);
|
|
|
|
+ ret = 0;
|
|
|
|
+ while (count > 0) {
|
|
|
|
+ do {
|
|
|
|
+ abdac_update_dma_tail(dac);
|
|
|
|
+ avail = abdac_dma_space(dac);
|
|
|
|
+ set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
+ if (avail >= DMA_WRITE_THRESHOLD)
|
|
|
|
+ break;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (file->f_flags & O_NONBLOCK) {
|
|
|
|
+ if (!ret)
|
|
|
|
+ ret = -EAGAIN;
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
|
|
|
|
+ avail, count);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ up(&dac->sem);
|
|
|
|
+ schedule();
|
|
|
|
+ if (signal_pending(current)) {
|
|
|
|
+ if (!ret)
|
|
|
|
+ ret = -ERESTARTSYS;
|
|
|
|
+ goto out_nosem;
|
|
|
|
+ }
|
|
|
|
+ down(&dac->sem);
|
|
|
|
+ } while (1);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ copied = abdac_dma_translate_from_user(dac, buffer, count);
|
|
|
|
+ if (copied < 0) {
|
|
|
|
+ if (!ret)
|
|
|
|
+ ret = -EFAULT;
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ abdac_start(dac);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ count -= copied;
|
|
|
|
+ ret += copied;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+
|
|
|
|
+out:
|
|
|
|
+ up(&dac->sem);
|
|
|
|
+out_nosem:
|
|
|
|
+ remove_wait_queue(&dac->write_wait, &wait);
|
|
|
|
+ set_current_state(TASK_RUNNING);
|
|
|
|
+ return ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+}
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
|
|
|
|
+ unsigned int cmd, unsigned long arg)
|
2007-06-08 13:44:01 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct at32_dac *dac = file->private_data;
|
|
|
|
+ int __user *up = (int __user *)arg;
|
|
|
|
+ struct audio_buf_info abinfo;
|
|
|
|
+ int val, ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ switch (cmd) {
|
|
|
|
+ case OSS_GETVERSION:
|
|
|
|
+ return put_user(SOUND_VERSION, up);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_SPEED:
|
|
|
|
+ if (get_user(val, up))
|
|
|
|
+ return -EFAULT;
|
|
|
|
+ if (val >= 0) {
|
|
|
|
+ abdac_stop(dac);
|
|
|
|
+ ret = abdac_set_sample_rate(dac, val);
|
|
|
|
+ if (ret)
|
|
|
|
+ return ret;
|
|
|
|
+ }
|
|
|
|
+ return put_user(dac->dsp_settings.sample_rate, up);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_STEREO:
|
|
|
|
+ if (get_user(val, up))
|
|
|
|
+ return -EFAULT;
|
|
|
|
+ abdac_stop(dac);
|
|
|
|
+ if (val && dac->dsp_settings.channels == 1)
|
|
|
|
+ dac->dsp_settings.input_order++;
|
|
|
|
+ else if (!val && dac->dsp_settings.channels != 1)
|
|
|
|
+ dac->dsp_settings.input_order--;
|
|
|
|
+ dac->dsp_settings.channels = val ? 2 : 1;
|
|
|
|
+ return 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_CHANNELS:
|
|
|
|
+ if (get_user(val, up))
|
|
|
|
+ return -EFAULT;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (val) {
|
|
|
|
+ if (val < 0 || val > 2)
|
|
|
|
+ return -EINVAL;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ abdac_stop(dac);
|
|
|
|
+ dac->dsp_settings.input_order
|
|
|
|
+ += val - dac->dsp_settings.channels;
|
|
|
|
+ dac->dsp_settings.channels = val;
|
|
|
|
+ }
|
|
|
|
+ return put_user(val, (int *)arg);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_GETFMTS:
|
|
|
|
+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_SETFMT:
|
|
|
|
+ if (get_user(val, up))
|
|
|
|
+ return -EFAULT;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (val == AFMT_QUERY) {
|
|
|
|
+ val = dac->dsp_settings.format;
|
|
|
|
+ } else {
|
|
|
|
+ ret = abdac_set_format(dac, val);
|
|
|
|
+ if (ret)
|
|
|
|
+ return ret;
|
|
|
|
+ }
|
|
|
|
+ return put_user(val, up);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ case SNDCTL_DSP_GETOSPACE:
|
|
|
|
+ abdac_update_dma_tail(dac);
|
|
|
|
+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
|
|
|
|
+ * (DMA_PERIOD_SIZE / 4));
|
|
|
|
+ abinfo.bytes = (abdac_dma_space(dac)
|
|
|
|
+ << dac->dsp_settings.input_order);
|
|
|
|
+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
|
|
|
|
+ >> (DMA_PERIOD_SHIFT
|
|
|
|
+ + dac->dsp_settings.input_order));
|
|
|
|
+ abinfo.fragments = ((abinfo.bytes
|
|
|
|
+ >> dac->dsp_settings.input_order)
|
|
|
|
+ / (DMA_PERIOD_SIZE / 4));
|
|
|
|
+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
|
|
|
|
+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
|
|
|
|
+ abinfo.bytes);
|
|
|
|
+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ default:
|
|
|
|
+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
|
|
|
|
+ return -EINVAL;
|
2007-10-16 15:22:57 +03:00
|
|
|
+ }
|
2008-02-07 22:08:19 +02:00
|
|
|
+}
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_dsp_open(struct inode *inode, struct file *file)
|
|
|
|
+{
|
|
|
|
+ struct at32_dac *dac = the_dac;
|
|
|
|
+ int ret;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (file->f_mode & FMODE_READ)
|
|
|
|
+ return -ENXIO;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ down(&dac->sem);
|
|
|
|
+ ret = -EBUSY;
|
|
|
|
+ if (dac->busy)
|
|
|
|
+ goto out;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->dma.head = dac->dma.tail = 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* FIXME: What are the correct defaults? */
|
|
|
|
+ dac->dsp_settings.channels = 2;
|
|
|
|
+ abdac_set_format(dac, AFMT_S16_BE);
|
|
|
|
+ ret = abdac_set_sample_rate(dac, 8000);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ file->private_data = dac;
|
|
|
|
+ dac->busy = 1;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = 0;
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
|
|
|
+out:
|
2008-02-07 22:08:19 +02:00
|
|
|
+ up(&dac->sem);
|
|
|
|
+ return ret;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int abdac_dsp_release(struct inode *inode, struct file *file)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct at32_dac *dac = file->private_data;
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ down(&dac->sem);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ abdac_stop(dac);
|
|
|
|
+ abdac_dma_cleanup(dac);
|
|
|
|
+ dac->busy = 0;
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ up(&dac->sem);
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct file_operations abdac_dsp_fops = {
|
|
|
|
+ .owner = THIS_MODULE,
|
|
|
|
+ .llseek = no_llseek,
|
|
|
|
+ .write = abdac_dsp_write,
|
|
|
|
+ .ioctl = abdac_dsp_ioctl,
|
|
|
|
+ .open = abdac_dsp_open,
|
|
|
|
+ .release = abdac_dsp_release,
|
|
|
|
+};
|
2007-07-13 12:56:05 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __init abdac_probe(struct platform_device *pdev)
|
|
|
|
+{
|
|
|
|
+ struct at32_dac *dac;
|
|
|
|
+ struct resource *regs;
|
|
|
|
+ struct clk *mck;
|
|
|
|
+ struct clk *sample_clk;
|
|
|
|
+ int irq;
|
|
|
|
+ int ret;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ if (the_dac)
|
|
|
|
+ return -EBUSY;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
+ if (!regs)
|
|
|
|
+ return -ENXIO;
|
|
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
|
|
+ if (irq < 0)
|
|
|
|
+ return irq;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ mck = clk_get(&pdev->dev, "pclk");
|
|
|
|
+ if (IS_ERR(mck))
|
|
|
|
+ return PTR_ERR(mck);
|
|
|
|
+ sample_clk = clk_get(&pdev->dev, "sample_clk");
|
|
|
|
+ if (IS_ERR(sample_clk)) {
|
|
|
|
+ ret = PTR_ERR(sample_clk);
|
|
|
|
+ goto out_put_mck;
|
|
|
|
+ }
|
|
|
|
+ clk_enable(mck);
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = -ENOMEM;
|
|
|
|
+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
|
|
|
|
+ if (!dac)
|
|
|
|
+ goto out_disable_clk;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ spin_lock_init(&dac->lock);
|
|
|
|
+ init_MUTEX(&dac->sem);
|
|
|
|
+ init_waitqueue_head(&dac->write_wait);
|
|
|
|
+ dac->pdev = pdev;
|
|
|
|
+ dac->mck = mck;
|
|
|
|
+ dac->sample_clk = sample_clk;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
+ if (!dac->regs)
|
|
|
|
+ goto out_free_dac;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto out_unmap_regs;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* FIXME */
|
|
|
|
+ dac->req.req.dmac = find_dma_controller(0);
|
|
|
|
+ if (!dac->req.req.dmac)
|
|
|
|
+ goto out_free_irq;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = dma_alloc_channel(dac->req.req.dmac);
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ goto out_free_irq;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac->req.req.channel = ret;
|
|
|
|
+ dac->req.req.block_complete = abdac_dma_block_complete;
|
|
|
|
+ dac->req.req.error = abdac_dma_error;
|
|
|
|
+ dac->req.data_reg = regs->start + DAC_DATA;
|
|
|
|
+ dac->req.periph_id = 2; /* FIXME */
|
|
|
|
+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
|
|
+ dac->req.width = DMA_WIDTH_32BIT;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* Make sure the DAC is silent and disabled */
|
|
|
|
+ dac_writel(dac, DATA, 0);
|
|
|
|
+ dac_writel(dac, CTRL, 0);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ ret = register_sound_dsp(&abdac_dsp_fops, -1);
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ goto out_free_dma;
|
|
|
|
+ dac->dev_dsp = ret;
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ /* TODO: Register mixer */
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ the_dac = dac;
|
|
|
|
+ platform_set_drvdata(pdev, dac);
|
2007-07-12 17:11:31 +03:00
|
|
|
+
|
2007-10-16 15:22:57 +03:00
|
|
|
+ return 0;
|
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+out_free_dma:
|
|
|
|
+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
|
|
|
|
+out_free_irq:
|
|
|
|
+ free_irq(irq, dac);
|
|
|
|
+out_unmap_regs:
|
|
|
|
+ iounmap(dac->regs);
|
|
|
|
+out_free_dac:
|
|
|
|
+ kfree(dac);
|
|
|
|
+out_disable_clk:
|
|
|
|
+ clk_disable(mck);
|
|
|
|
+ clk_put(sample_clk);
|
|
|
|
+out_put_mck:
|
|
|
|
+ clk_put(mck);
|
|
|
|
+ return ret;
|
2007-07-12 17:11:31 +03:00
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __exit abdac_remove(struct platform_device *pdev)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ struct at32_dac *dac;
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+ dac = platform_get_drvdata(pdev);
|
|
|
|
+ if (dac) {
|
|
|
|
+ unregister_sound_dsp(dac->dev_dsp);
|
|
|
|
+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
|
|
|
|
+ free_irq(platform_get_irq(pdev, 0), dac);
|
|
|
|
+ iounmap(dac->regs);
|
|
|
|
+ clk_disable(dac->mck);
|
|
|
|
+ clk_put(dac->sample_clk);
|
|
|
|
+ clk_put(dac->mck);
|
|
|
|
+ kfree(dac);
|
|
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
|
|
+ the_dac = NULL;
|
|
|
|
+ }
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2007-10-16 15:22:57 +03:00
|
|
|
+ return 0;
|
|
|
|
+}
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static struct platform_driver abdac_driver = {
|
|
|
|
+ .remove = __exit_p(abdac_remove),
|
2007-10-16 15:22:57 +03:00
|
|
|
+ .driver = {
|
2008-02-07 22:08:19 +02:00
|
|
|
+ .name = "abdac",
|
2007-10-16 15:22:57 +03:00
|
|
|
+ },
|
|
|
|
+};
|
2007-06-08 13:44:01 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static int __init abdac_init(void)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ return platform_driver_probe(&abdac_driver, abdac_probe);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+module_init(abdac_init);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+static void __exit abdac_exit(void)
|
2007-10-16 15:22:57 +03:00
|
|
|
+{
|
2008-02-07 22:08:19 +02:00
|
|
|
+ platform_driver_unregister(&abdac_driver);
|
2007-10-16 15:22:57 +03:00
|
|
|
+}
|
2008-02-07 22:08:19 +02:00
|
|
|
+module_exit(abdac_exit);
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
|
|
|
+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
|
2007-10-16 15:22:57 +03:00
|
|
|
+MODULE_LICENSE("GPL");
|
2008-06-13 01:24:27 +03:00
|
|
|
--- /dev/null
|
|
|
|
+++ b/sound/oss/at32_abdac.h
|
2008-02-07 22:08:19 +02:00
|
|
|
@@ -0,0 +1,59 @@
|
2007-10-16 15:22:57 +03:00
|
|
|
+/*
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Register definitions for the Atmel AT32 on-chip DAC.
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
2007-10-16 15:22:57 +03:00
|
|
|
+ *
|
2008-02-07 22:08:19 +02:00
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
|
|
+ * published by the Free Software Foundation.
|
2007-10-16 15:22:57 +03:00
|
|
|
+ */
|
2008-02-07 22:08:19 +02:00
|
|
|
+#ifndef __SOUND_OSS_AT32_ABDAC_H__
|
|
|
|
+#define __SOUND_OSS_AT32_ABDAC_H__
|
|
|
|
+
|
|
|
|
+/* DAC register offsets */
|
|
|
|
+#define DAC_DATA 0x0000
|
|
|
|
+#define DAC_CTRL 0x0008
|
|
|
|
+#define DAC_INT_MASK 0x000c
|
|
|
|
+#define DAC_INT_EN 0x0010
|
|
|
|
+#define DAC_INT_DIS 0x0014
|
|
|
|
+#define DAC_INT_CLR 0x0018
|
|
|
|
+#define DAC_INT_STATUS 0x001c
|
|
|
|
+#define DAC_PDC_DATA 0x0020
|
|
|
|
+
|
|
|
|
+/* Bitfields in CTRL */
|
|
|
|
+#define DAC_SWAP_OFFSET 30
|
|
|
|
+#define DAC_SWAP_SIZE 1
|
|
|
|
+#define DAC_EN_OFFSET 31
|
|
|
|
+#define DAC_EN_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
|
|
|
|
+#define DAC_UNDERRUN_OFFSET 28
|
|
|
|
+#define DAC_UNDERRUN_SIZE 1
|
|
|
|
+#define DAC_TX_READY_OFFSET 29
|
|
|
|
+#define DAC_TX_READY_SIZE 1
|
|
|
|
+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
|
|
|
|
+#define DAC_TX_BUFFER_EMPTY_SIZE 1
|
|
|
|
+#define DAC_CHANNEL_TX_END_OFFSET 31
|
|
|
|
+#define DAC_CHANNEL_TX_END_SIZE 1
|
|
|
|
+
|
|
|
|
+/* Bit manipulation macros */
|
|
|
|
+#define DAC_BIT(name) \
|
|
|
|
+ (1 << DAC_##name##_OFFSET)
|
|
|
|
+#define DAC_BF(name, value) \
|
|
|
|
+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
|
|
|
|
+ << DAC_##name##_OFFSET)
|
|
|
|
+#define DAC_BFEXT(name, value) \
|
|
|
|
+ (((value) >> DAC_##name##_OFFSET) \
|
|
|
|
+ & ((1 << DAC_##name##_SIZE) - 1))
|
|
|
|
+#define DAC_BFINS(name, value, old) \
|
|
|
|
+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
|
|
|
|
+ << DAC_##name##_OFFSET)) \
|
|
|
|
+ | DAC_BF(name,value))
|
|
|
|
+
|
|
|
|
+/* Register access macros */
|
|
|
|
+#define dac_readl(port, reg) \
|
|
|
|
+ __raw_readl((port)->regs + DAC_##reg)
|
|
|
|
+#define dac_writel(port, reg, value) \
|
|
|
|
+ __raw_writel((value), (port)->regs + DAC_##reg)
|
2007-10-16 15:22:57 +03:00
|
|
|
+
|
2008-02-07 22:08:19 +02:00
|
|
|
+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
|
2008-06-13 01:24:27 +03:00
|
|
|
--- a/sound/spi/at73c213.c
|
|
|
|
+++ b/sound/spi/at73c213.c
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -737,7 +737,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
/*
|
|
|
|
* Device functions
|
|
|
|
*/
|
|
|
|
-static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
|
|
|
|
+static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Continuous clock output.
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -767,7 +767,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
-static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
|
|
|
|
+static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
unsigned char dac_ctrl = 0;
|
2008-06-13 00:13:40 +03:00
|
|
|
@@ -933,7 +933,7 @@
|
2008-04-23 23:25:37 +03:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
-static int snd_at73c213_probe(struct spi_device *spi)
|
|
|
|
+static int __devinit snd_at73c213_probe(struct spi_device *spi)
|
|
|
|
{
|
|
|
|
struct snd_card *card;
|
|
|
|
struct snd_at73c213 *chip;
|