openwrt-xburst/package/base-files/default/etc/init.d/S10boot

#!/bin/sh
. /etc/nvram.sh

[ "$(uname -r|grep -c 2.4)" = "1" ] && {
        echo "S" > /proc/jffs2_bbc
}

vconfig set_name_type VLAN_PLUS_VID_NO_PAD

HOSTNAME=$(nvram get wan_hostname)
HOSTNAME=${HOSTNAME%%.*}
echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname

# automagically run firstboot
[ -z "$FAILSAFE" -a -z "$(nvram get no_root_swap)" ] && {
	{ mount|grep "on / type jffs2" 1>&-; } || firstboot
}

mkdir -p /var/run
mkdir -p /var/log
touch /var/log/wtmp
touch /var/log/lastlog
[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe

sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash

ifconfig lo 127.0.0.1 up
ifconfig eth0 promisc

[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && { # FIXME: replace when the new switch driver is integrated...
  robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
  robocfg show
}