openwrt-xburst/target/linux/lantiq/image/EASY80920.dtsi

/include/ "vr9.dtsi"

/ {
	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};
	
	fpi@10000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "lantiq,fpi", "simple-bus";
		ranges = <0x0 0x10000000 0xEEFFFFF>;
		reg = <0x10000000 0xEF00000>;

		localbus@0 {
			#address-cells = <2>;
			#size-cells = <1>;
			compatible = "lantiq,localbus", "simple-bus";
			
		};

		spi@E100800 {
			compatible = "lantiq,spi-xway-broken";
			reg = <0xE100800 0x100>;
			interrupt-parent = <&icu0>;
			interrupts = <22 23 24>;
			#address-cells = <1>;
			#size-cells = <1>;

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "s25fl129p0";
				reg = <0 0>;
				linux,modalias = "m25p80", "mx25l3205d";
				spi-max-frequency = <1000000>;

				partition@0 {
					reg = <0x0 0x20000>;
					label = "SPI (RO) U-Boot Image";
					read-only;
				};

				partition@20000 {
					reg = <0x20000 0x10000>;
					label = "ENV_MAC";
					read-only;
				};

				partition@30000 {
					reg = <0x30000 0x10000>;
					label = "DPF";
					read-only;
				};

				partition@40000 {
					reg = <0x40000 0x10000>;
					label = "NVRAM";
					read-only;
				};

				partition@500000 {
					reg = <0x50000 0x003a0000>;
					label = "kernel";
				};
			};
		};

		gpio: pinmux@E100B10 {
			compatible = "lantiq,pinctrl-xr9";
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;
			
			interrupt-parent = <&icu0>;
			interrupts = <166 135 66 40 41 42 38>;

			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xE100B10 0xA0>;

			state_default: pinmux {
				exin3 {
					lantiq,groups = "exin3";
					lantiq,function = "exin";
				};
				stp {
					lantiq,groups = "stp";
					lantiq,function = "stp";
				};
				spi {
					lantiq,groups = "spi", "spi_cs4";
					lantiq,function = "spi";
				};
				nand {
					lantiq,groups = "nand cle", "nand ale",
							"nand rd", "nand rdy";
					lantiq,function = "ebu";
				};
				mdio {
					lantiq,groups = "mdio";
					lantiq,function = "mdio";
				};
				pci {
					lantiq,groups = "gnt1", "req1";
					lantiq,function = "pci";
				};
				conf_out {
					lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
							"io4", "io5", "io6", /* stp */
							"io21",
							"io33";
					lantiq,open-drain;
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
				pcie-rst {
					lantiq,pins = "io38";
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
				conf_in {
					lantiq,pins = "io39", /* exin3 */
							"io48"; /* nand rdy */
					lantiq,pull = <2>;
				};
			};
		};

		eth@E108000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "lantiq,xrx200-net";
			reg = <	0xE108000 0x3000 /* switch */
				0xE10B100 0x70 /* mdio */
				0xE10B1D8 0x30 /* mii */
				0xE10B308 0x30 /* pmac */
			>;
			interrupt-parent = <&icu0>;
			interrupts = <73 72>;

			lan: interface@0 {
				compatible = "lantiq,xrx200-pdi";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0>;
				mac-address = [ 00 11 22 33 44 55 ];

				ethernet@0 {
					compatible = "lantiq,xrx200-pdi-port";
					reg = <0>;
					phy-mode = "rgmii";
					phy-handle = <&phy0>;
				};
				ethernet@1 {
					compatible = "lantiq,xrx200-pdi-port";
					reg = <1>;
					phy-mode = "rgmii";
					phy-handle = <&phy1>;
				};
				ethernet@2 {
					compatible = "lantiq,xrx200-pdi-port";
					reg = <2>;
					phy-mode = "gmii";
					phy-handle = <&phy11>;
				};
			};

			wan: interface@1 {
				compatible = "lantiq,xrx200-pdi";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <1>;
				mac-address = [ 00 11 22 33 44 56 ];
				lantiq,wan;
				ethernet@5 {
					compatible = "lantiq,xrx200-pdi-port";
					reg = <5>;
					phy-mode = "rgmii";
					phy-handle = <&phy5>;
				};
			};

			test: interface@2 {
				compatible = "lantiq,xrx200-pdi";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <2>;
				mac-address = [ 00 11 22 33 44 57 ];
				ethernet@4 {
					compatible = "lantiq,xrx200-pdi-port";
					reg = <4>;
					phynmode0 = "gmii";
					phy-handle = <&phy13>;
				};
			};

			mdio@0 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "lantiq,xrx200-mdio";
				phy0: ethernet-phy@0 {
					reg = <0x0>;
					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
					lantiq,c45-reg-init = <1 0 0 0>; 
				};
				phy1: ethernet-phy@1 {
					reg = <0x1>;
					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
					lantiq,c45-reg-init = <1 0 0 0>; 
				};
				phy5: ethernet-phy@5 {
					reg = <0x5>;
					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
					lantiq,c45-reg-init = <1 0 0 0>; 
				};
				phy11: ethernet-phy@11 {
					reg = <0x11>;
					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
					lantiq,c45-reg-init = <1 0 0 0>; 
				};
				phy13: ethernet-phy@13 {
					reg = <0x13>;
					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
					lantiq,c45-reg-init = <1 0 0 0>; 
				};
			};
		};

		stp: stp@E100BB0 {
			compatible = "lantiq,gpio-stp-xway";
			reg = <0xE100BB0 0x40>;
			#gpio-cells = <2>;
			gpio-controller;

			lantiq,shadow = <0xffff>;
			lantiq,groups = <0x7>;
			lantiq,dsl = <0x3>;
			lantiq,phy1 = <0x7>;
			lantiq,phy2 = <0x7>;
			/* lantiq,rising; */
		};

		ifxhcd@E101000 {
			status = "okay";
			gpios = <&gpio 33 0>;
			lantiq,portmask = <0x3>;
		};

		pci@E105400 {
			#address-cells = <3>;
			#size-cells = <2>;
			#interrupt-cells = <1>;
			compatible = "lantiq,pci-xway1";
			bus-range = <0x0 0x0>;
			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
			reg = <0x7000000 0x8000         /* config space */
				0xE105400 0x400>;       /* pci bridge */
			lantiq,bus-clock = <33333333>;
			/*lantiq,external-clock;*/
			lantiq,delay-hi = <0>; /* 0ns delay */
			lantiq,delay-lo = <0>; /* 0.0ns delay */
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
				>;
			gpios-reset = <&gpio 21 0>;
			req-mask = <0x1>;	/* GNT1 */
		};
	};

	gphy-xrx200 {
		compatible = "lantiq,phy-xrx200";
		firmware = "lantiq/vr9_phy11g_a2x.bin";
		phys = [ 00 01 ];
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;
		reset {
			label = "reset";
			gpios = <&gpio 7 1>;
			linux,code = <0x198>;
		};
		paging {
			label = "paging";
			gpios = <&gpio 11 1>;
			linux,code = <0x100>;
		};
	};

/*	gpio-keys {
		compatible = "gpio-keys";
		wps {
			gpios = <&gpio 2 0>;
			linux,code = <0x100>;
		};
	};*/

	gpio-leds {
		compatible = "gpio-leds";
		
		power {
			label = "power";
			gpios = <&stp 9 0>;
			default-state = "on";
		};
		warning {
			label = "warning";
			gpios = <&stp 22 0>;
		};
		fxs1 {
			label = "fxs1";
			gpios = <&stp 21 0>;
		};
		fxs2 {
			label = "fxs2";
			gpios = <&stp 20 0>;
		};
		fxo {
			label = "fxo";
			gpios = <&stp 19 0>;
		};
		usb1 {
			label = "usb1";
			gpios = <&stp 18 0>;
		};
		usb2 {
			label = "usb2";
			gpios = <&stp 15 0>;
		};
		sd {
			label = "sd";
			gpios = <&stp 14 0>;
		};
		wps {
			label = "wps";
			gpios = <&stp 12 0>;
		};
	};
};