1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:20:37 +02:00
openwrt-xburst/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c

121 lines
3.5 KiB
C
Raw Normal View History

/*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* This is the interface to the remote debugger stub.
*
*/
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
#include <asm/io.h>
static struct async_struct kdb_port_info = {0};
static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
{
return readb((unsigned long) info->iomem_base +
(offset<<info->iomem_reg_shift));
}
static __inline__ void serial_out(struct async_struct *info, int offset,
int value)
{
writeb(value, (unsigned long) info->iomem_base +
(offset<<info->iomem_reg_shift));
}
void rs_kgdb_hook(struct serial_state *ser) {
int t;
kdb_port_info.state = ser;
kdb_port_info.magic = SERIAL_MAGIC;
kdb_port_info.port = ser->port;
kdb_port_info.flags = ser->flags;
kdb_port_info.iomem_base = ser->iomem_base;
kdb_port_info.iomem_reg_shift = ser->iomem_reg_shift;
kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
/*
* Clear all interrupts
*/
serial_in(&kdb_port_info, UART_LSR);
serial_in(&kdb_port_info, UART_RX);
serial_in(&kdb_port_info, UART_IIR);
serial_in(&kdb_port_info, UART_MSR);
/*
* Now, initialize the UART
*/
serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
/*
* and set the speed of the serial port
* (currently hardwired to 115200 8N1
*/
/* baud rate is fixed to 115200 (is this sufficient?)*/
t = kdb_port_info.state->baud_base / 115200;
/* set DLAB */
serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */
/* reset DLAB */
serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
}
int putDebugChar(char c)
{
if (!kdb_port_info.state) { /* need to init device first */
return 0;
}
while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
;
serial_out(&kdb_port_info, UART_TX, c);
return 1;
}
char getDebugChar(void)
{
if (!kdb_port_info.state) { /* need to init device first */
return 0;
}
while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
;
return(serial_in(&kdb_port_info, UART_RX));
}